Photo Cell User Manual P5102
Contents
1. Photo Cell User Manual P5102 I Technical Specification Working voltage 12 24VAC DC Working current 24VDC emitter lt 15mA receiver lt 30mA Photocell wavelength 940nm Angle of opposite emission lt 5 Receiver range gt 12m Internal Rotation system adjusted Angle 0 180 Working temperature 20 60 C Relay contact loading capacity 1A 30VDC Waterproof grade IP54 10 Size 127 50 28mm II Safety Instruction See at ee Oe oe YS For security please read the user manual carefully before initial operation Please be sure the power is off before connecting the product is produced without fuse It is used only for the manual remote control and wireless control equipment system this system must not endanger life or property during the running failure or its security risks have been eliminated Please operate the product in effective receive range PR5102V5 PT5102V5 12V 24VAC DC POWER INPUT IV Installation Instruction 1 The product should be installed more than 20cm upper the ground to avoid reflection and the distance between emitter and receiver shall be more than 0 5 meters if not maybe the photocell will working on or cannot work the end user should installed the photocell on the back of the direct sunshine or other strong shining 5 to keep the photocell work well steadily Pls try to avoid installing other photocell emitters within effective receive range If install many photo cells on the s2. ame line can install receivers on two ends and then emitters in the middle back to back which can effectively avoid the problem as above in order to avoid signal bias of emitters and receivers which will easily cause mis operation pls Install the photocell firmly Connecting power after checking no error of connecting lines emitter LED lights receiver LED lights receiver NO COM connects while NC COM disconnects Making the CAP of emitter and receiver align receiver LED off NC COM connects while NO COM disconnects If the signal between emitter and receiver is interrupted receiver LED lights NC COM disconnects while NO COM connects V Installation Instruction 4 Connect 3 Drill and fix 2 Fix the paper on expansion wires Open package taking out wall sleeve and accessories gt E T S000 gt 7 Screw bottom and top 8 Finished 5 Fix bottom cover 6 Put cover together cover on
Download Pdf Manuals
Related Search