Home

P. 276

Contents

1. Lexus night view is designed to help you see objects better when driving in dark ness ona road with few curves Do not use the Lexus night view in well lit areas or on roads with many curves or slopes There may be areas that cannot be dis played by the system due to the road conditions curve size gradient etc Lexus night view may be unable to project some features at an appropriate level of brightness Some or all parts of certain features may be dark or difficult to see Do not rely solely on the Lexus night view and drive carefully while checking the surroundings for safety as you would with a normal vehicle Also the following features and conditions may not be displayed clearly Features that are difficult to display Clothing of a pedestrian made of a certain kind of material ex leather jackets The characters on signs and billboards The information on road signs Conditions in which display is difficult Unfavorable weather conditions such as rain fog snowfall snow storms etc There are large puddles of water on the road surface following rainfall The area of the front windshield in front of the camera is fogged up dirty or icy The areas around the headlights are covered with ice snow mud etc The battery voltage is remarkably low There are bright lights ahead of the vehicle GS350_U OM30C34U 4 5 Using the driving support systems 297 NOTICE E The near infrared camera
2. No attempt is made to drive the vehicle within approximately 2 seconds of releasing the brake pedal The shift lever is moved to P The parking brake is applied The brake pedal is depressed again The brake pedal has been depressed for more than approximately 3 minutes E lf the slip indicator comes on It may indicate a malfunction in the system Contact your Lexus dealer A CAUTION BHill start assist control Do not overly rely on hill start assist control Hill start assist control may not oper ate effectively on steep inclines and roads covered with ice Unlike the parking brake hill start assist control is not intended to hold the vehi cle stationary for an extended period of time Do not attempt to use hill start assist control to hold the vehicle on an incline as doing so may lead to an acci dent GS350_U OM30C34U BulAliq 278 4 5 Using the driving support systems PCS Pre Collision System When the radar sensor detects that a frontal collision is highly likely or even unavoidable safety systems such as the brakes and seat belts are automatically engaged to lessen impact as well as vehicle damage The pre collision system can be turned on and off as necessary by oper ating the switch gt P 280 Pre collision seat belts front seat only If the pre collision sensor detects that a collision is unavoidable the pre collision system will retract the seat belt
3. Follow these precautions to avoid damage to or incorrect operation of the Lexus night view SS IN45GS053 Make sure the front windshield is kept clean System performance may deteriorate if rain water condensation or ice adheres to the camera If you notice the inner lens of the camera is dirty the garnish will have to be replaced Consult your Lexus dealer Do not subject the camera to strong impacts or disassemble the camera As the alignment of the camera has been very finely adjusted do not change or remove the mounting f the front windshield fogs up defog the windshield using the front defroster Do not dirty or scratch the camera lens Night view may not function properly if an object is placed on the sensor or any thing that blocks the sensor is affixed to the windshield E The near infrared light Follow these precautions to avoid damage to or incorrect operation of the Lexus night view system IN45GS054 System performance may deteriorate if the areas around the headlights are dirty Clean the vehicle if it is dirty The near infrared light irradiates strong energy not visible to the eyes Do not stare at the light at close range for a long time GS350_U OM30C34U BulAliq
4. BulAliq 228 4 5 Using the driving support systems LKA Lane Keeping Assist Summary of functions While driving on a freeway or motor highway that has lane markers and no sharp curves the system recognizes the lanes using a camera located above the inside rear view mirror as a sensor to assist the driver with stay ing in the lane The LKA system has two functions Camera sensor IN45GS133 If equipped GS350_U OM30C34U 4 5 Using the driving support systems 229 Functions included in the LKA C Lane departure warning function If the system judges that the vehicle may deviate from its lane it alerts the driver using beeping screen displays and a sensory warning given via the steering wheel A slight steering torque is applied for a short period of time in the direction of the center of the lane 2 Lane keeping assist function e This function will be active when the vehicle to vehicle distance con trol mode of the cruise control P 213 is set with vehicle speed above approximately 45 mph 72 km h and while the lane depar ture warning function is active When the lane keeping assist function is active a slight steering torque will be applied to help the driver maintain the vehicle inside the lane The lane keeping assist function will be temporarily canceled if the steering wheel is not operated or if you continue driving with your hands lightly touch ing the stee
5. It is still necessary for the driver to pay close attention to the vehi cle s surroundings Assisting the driver in making correct judgment When attempting to estimate the likelihood of a collision the only data available to the pre collision system is that from obstacles it has detected directly in front of the vehicle Therefore it is absolutely necessary for the driver to remain vigilant and to determine whether or not there is a possibility of collision in any given situ ation Assisting the driver in taking action The pre collision system s braking assist feature is designed to help reduce the severity of a collision and so only acts when the system has judged that a collision is unavoidable This system by itself is not capable of automatically avoiding a col lision or bringing the vehicle to a stop safely For this reason when encountering a dangerous situation the driver must take direct and immediate action in order to ensure the safety of all involved NOTICE E Precautions for cleaning the driver monitor sensor Gently wipe the sensor with a soft cloth to prevent damage Wipe any excess dirt with a cloth dampened with neutral detergent all liquids having been wringed out of the cloth After that wipe again with a dry cloth Do not use benzene thinner glass cleaners wax etc GS350_U OM30C34U 4 5 Using the driving support systems 287 BSM Blind Spot Monitor The Blind Spot Monit
6. 30 cm Corner sensors Approximately 1 0 ft 30 cm Rear center sensors Approximately 11 ft 35 cm When 2 or more obstacles are detected simultaneously the buzzer system responds to the nearest obstacle If one or both come within the above distances the beep will repeat a long tone followed by fast beeps Detection range of the sensors C Approximately 3 3 ft 100 cm 2 Approximately 49 ft 150 cm 3 Approximately 2 0 ft 60 cm The diagram shows the detection range of the sensors Note that the sensors cannot detect obstacles that are extremely close to the vehicle The range of the sensors may change depending on the shape of the object etc IN45GS034 GS350_U OM30C34U A EA 246 4 5 Using the driving support systems Setting up intuitive parking assist You can change the warning beep volume and Remote Touch screen operating conditions Ld we Alert volume setting 2 Display on off 3 Alert distance setting Make sure to save after changing settings GS350_U OM30C34U Press the MENU button on the Remote Touch P 306 Select SETUP on the Menu screen Select Vehicle on the Setup screen 4 Select Lexus Park Assist on the Vehicle Settings screen LEXUS Park Assist Settings Alert Volume mF ey EA Lasla Display Display Off E Distance SEL Front 4 5
7. Using the driving support systems 247 E Alert volume setting The alert volume can be adjusted Select 1 to 5 on the LEXUS Park Assist settings Select Save P E Display on off setting On or off can be selected for intuitive parking assist display 1 Select Display Off When the Display Of indicator is turned on the display of intuitive parking assist will be off Select Display Off again to turn the display of intuitive park ing assist on 2 Select Save m Alert distance setting Front or rear center sensors display and tone indication can be set 1 Select Front or Rear Long distance or short distance can be selected N Select Save E The intuitive parking assist can be operated when Front center sensors The engine switch is in IGNITION ON mode The shift lever is in a position other than P The vehicle speed is less than about 6 mph 10 km h Front corner sensors The engine switch is in IGNITION ON mode The shift lever is in a position other than P or R The vehicle speed is less than about 6 mph 10 km h J Rear corner and rear center sensors The engine switch is in IGNITION ON mode The shift lever is in R GS350_U OM30C34U A 248 4 5 Using the driving support systems E Intuitive parking assist display When an obstacle is dete
8. a margin of error between the fixation guide lines on the screen and the actual distance course on the road GS350_U OM30C34U 4 5 Using the driving support systems When the ground behind the vehicl The distance guide lines will appear to be closer to the vehicle than the actual distance Because of this objects will appear to be farther away than they actually are In the same way there will be a margin of error between the guidelines and the actual dis tance course on the road When the ground behind the vehicl The distance guide lines will appear to be further from the vehicle than the actual distance Because of this objects will appear to be closer than they actually are In the same way there will be a margin of error between the guidelines and the actual distance course on the road GS350_U OM30C34U 255 e slopes up sharply CS ES IN45GS118Us e slopes down sharply IN45GS119Ue A Ea 256 4 5 Using the driving support systems When any part of the vehicle sags When any part of the vehicle sags due to the number of passengers or the distribution of the load there is a margin of error between the fixation guide lines on the screen and the actual dis A margin of error dt tance course on the road CEE m When approaching three dimensional objects The distance guide lines are displayed according to flat surfaced objects
9. accelerates When driving up or down consecutive steep inclines such as hills a dip in the road etc When multiple vehicles approach with only a small gap between each vehicle When vehicle lanes are wide and the vehicle in the next lane is too far away from your vehicle When the vehicle that enters the detection area is traveling at about the same speed as your vehicle When there is a significant difference in height between your vehicle and the vehicle that enters the detection area Directly after the BSM switch is set to on Instances of the Blind Spot Monitor unnecessarily detecting a vehicle and or object may increase under the following conditions When there is only a short distance between your vehicle and a guardrail wall etc When there is only a short distance between your vehicle and a following vehi cle When vehicle lanes are narrow and a vehicle driving 2 lanes across from your vehicle enters the detection area E The outside rear view mirror indicators visibility When under strong sunlight the outside rear view mirror indicator may be difficult to see GS350_U OM30C34U 4 5 Using the driving support systems 291 E When there is a malfunction in the system If a system malfunction is detected due to any of the following reasons warning mes sages will be displayed P 703 There is a malfunction with the sensors The sensors have become dirty The outside temperature is extremely
10. are extremely narrow or extremely wide When the vehicle leans to one side an unusual amount due to a heavy load or improper tire inflation pressure When the following distance between your vehicle and the vehicle ahead is extremely short When the lane markers are yellow These may be more difficult for the system to recognize compared to white markers When the lane markers are broken Botts dots Raised pavement marker or stones When lane markers are obscured or partially obscured by sand dirt etc When there are shadows on the road running parallel with lane markers or if a shadow covers the lane markers When driving on a particularly bright road surface such as concrete When driving on a road surface that is bright due to reflected light When driving in a location where the light level changes rapidly such as the entrance to or exit from a tunnel When sunlight or the headlights of oncoming vehicles are shining directly into the camera lens When driving on roads that are branching or merging When driving on a road surface that is wet due to rain previous rainfall standing water etc When the vehicle experiences strong up and down motion such as when driving on an extremely rough road or ona seam in the pavement When headlight brightness at nighttime is reduced due to dirt on the lenses or when the headlights are misaligned When driving with a strong crosswind GS350_
11. difficult to hear beeps due to the volume of audio system or air flow noise of air conditioning system E f a message is displayed on the multi information display P 700 707 E Certification gt For vehicles sold in the U S A This device complies with Part 15 of the FCC Rules Operation is subject to the fol lowing two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation gt For vehicles sold in Canada This ISM device complies with Canadian ICES O01 Cet appareil ISM est conforme a la norme NMB O001 du Canada GS350_U OM30C34U BulAliq 250 4 5 Using the driving support systems A CAUTION E When using the intuitive parking assist Observe the following precautions Failing to do so may result in the vehicle being unable to be driven safely and possi bly cause an accident Do not use the sensor at speeds in excess of 6 mph 10 km h The sensors detection areas and reaction times are limited When moving for ward or reversing check the areas surrounding the vehicle especially the sides of the vehicle for safety and drive slowly using the brake to control the vehicle s speed Do not install accessories within the sensors detection areas NOTICE E When using intuitive parking assist sensor In the following situations th
12. equipped When the system determines that there is a possibility of a collision and either the driver is not facing forward or the driver s eyes are closed PCS warnings are given in advance to warn the driver If the system determines that the conditions to operate pre collision alert braking have been met even when the possibility of a collision increases further pre collision alert braking will operate GS350_U OM30C34U ae 280 4 5 Using the driving support systems l Disabling pre collision system i Enabled 2 Disabled The PCS warning light comes on when pre collision system is disabled IN45GS044b Radar sensor The radar sensor detects vehicles or other obstacles on or near the road ahead and determines whether a collision is imminent based on the position speed and heading of the obstacles IN45GS024a Driver monitor sensor if equipped The driver monitor sensor detects the direction the driver is facing and whether the driver s eyes are open or closed The system determines whether the driver is facing forward and whether or not the driver s eyes are closed GS350_U OM30C34U 4 5 Using the driving support systems 281 E The pre collision system is operational when The pre collision system off button is not pressed and the following conditions are met Pre collision warning Vehicle speed is greater than about 10 mph 15
13. equipped Provides independent control of the VGRS DRS and EPS Contributes to turning characteristics at low speeds responsiveness at medium speeds and safety at high speeds by controlling the steering angle of the front and rear wheels in accordance with the steering wheel opera tion and vehicle speed VDIM Vehicle Dynamics Integrated Management Provides integrated control of the ABS brake assist TRAC VSC hill start assist control EPS VGRS if equipped and DRS if equipped systems Helps to maintain vehicle stability when swerving on slippery road sur faces by controlling the brakes engine output steering assist and steering ratio PCS Pre Collision System if equipped P 278 GS350_U OM30C34U EA 270 4 5 Using the driving support systems When the TRAC VSC systems are operating The slip indicator light will flash while the TRAC VSC systems are operating IN45GS041 Disabling the TRAC VSC systems If the vehicle gets stuck in fresh snow or mud the TRAC VSC systems may reduce power from the engine to the wheels You may need to turn the system off to enable you to rock the vehicle in order to free it E Turning off the TRAC system only To turn the TRAC system off quickly press and release the but ton The TRAC OFF will be shown on the multi information display Press the button again to turn the system back on GS350_
14. km h The speed at which your vehicle is approaching the obstacle or oncoming vehi cle is greater than about 10 mph 15 km h Pre collision seat belts operating conditions A Vehicle speed is greater than about 19 mph 30 km h The system detects sudden braking or skidding The front occupants are wearing a seat belt Pre collision seat belts operating conditions B Vehicle speed is greater than about 4 mph 5 km h The speed at which your vehicle is approaching the obstacle or oncoming vehi cle is greater than about 19 mph 30 km h The front occupants are wearing a seat belt Pre collision brake assist Vehicle speed is greater than about 19 mph 30 km h The speed at which your vehicle is approaching the obstacle or the vehicle run ning ahead of you is greater than about 19 mph 30 km h The brake pedal is depressed Pre collision braking Vehicle speed is greater than about 10 mph 15 km h The speed at which your vehicle is approaching the obstacle or the vehicle run ning ahead of you is greater than about 10 mph 15 km h Suspension control Vehicle speed is greater than about 4 mph 5 km h The speed at which your vehicle is approaching the obstacle or the vehicle run ning ahead of you is greater than about 19 mph 30 km h Steering control Vehicle speed is greater than about 19 mph 30 km h The speed at which your vehicle is approaching the obstacle or the vehicle run ning a
15. the following conditions as the radar sensor may not be able to correctly detect vehicles ahead and a fatal or serious accident may result When water or snow thrown up by the surrounding vehicles hinders the function ing of the sensor When your vehicle is pointing upwards caused by a heavy load in the trunk etc When the road curves or when the lanes are narrow When steering wheel operation or your position in the lane is unstable When the vehicle ahead of you decelerates suddenly GS350_U OM30C34U 4 5 Using the driving support systems 227 A CAUTION E Handling the radar sensor Observe the following to ensure the cruise control system can function effectively Otherwise the system may not function correctly and could result in an accident Keep the sensor and grille cover clean at all times Clean the sensor and grille cover with a soft cloth so you do not mark or damage them Do not subject the sensor or surrounding area to a strong impact If the sensor moves even slightly off position the system may malfunction If the sensor or surrounding area is subject to a strong impact always have the area inspected and adjusted by a Lexus dealer Do not disassemble the sensor Do not attach accessories or stickers to the sensor grille cover or surrounding area Do not modify or paint the sensor and grille cover Do not replace them with non genuine parts GS350_U OM30C34U
16. the lever is held When the set speed is shown in km h Fine adjustment By approximately 0 6 mph 1 km h each time the lever is operated Large adjustment By approximately 3 1 mph 5 km h for each 0 75 seconds the lever is held Inthe constant speed control mode P 220 the set speed will be increased or decreased as follows Fine adjustment By approximately 1 mph 1 6 km h each time the lever is oper ated Large adjustment The set speed can be increased or decreased continually until the lever is released GS350_U OM30C34U n EA 216 4 5 Using the driving support systems f Changing the vehicle to vehicle distance Pressing the button changes the vehicle to vehicle distance as fol lows 4 Long 2 Medium B Short The vehicle to vehicle distance is set automatically to long mode when the engine switch is turned to IGNITION ON mode If a vehicle is running ahead of you the preceding vehicle mark will also be displayed i Vehicle to vehicle distance settings Select a distance from the table below Note that the distances shown cor respond to a vehicle speed of 50 mph 80 km h Vehicle to vehicle dis tance increases decreases in accordance with vehicle speed Distance options Vehicle to vehicle distance Long Approximately 160 ft 50 m Medium Approximately 130 ft 40 m Short Approximately 100 ft 30 m GS35
17. the system from overheat ing when there is frequent steering input over an extended period of time The steer ing wheel may feel heavy as a result Should this occur refrain from excessive steering input or stop the vehicle and turn the engine off The effectiveness will improve after a short while If the LKA Lane Keeping Assist system cannot operate in this case a warning message will be shown on the multi information display GS350_U OM30C34U BulAliq 274 4 5 Using the driving support systems A CAUTION E The ABS does not operate effectively when Tires with inadequate gripping ability are used such as excessively worn tires on a snow covered road The vehicle hydroplanes while driving at high speed on wet or slick roads E Stopping distance when the ABS is operating may exceed that of normal condi tions The ABS is not designed to shorten the vehicle s stopping distance Always main tain a safe distance from the vehicle in front of you in the following situations When driving on dirt gravel or snow covered roads When driving with tire chains When driving over bumps in the road When driving over roads with potholes or uneven surfaces E TRAC may not operate effectively when Directional control and power may not be achievable while driving on slippery road surfaces even if the TRAC system is operating Do not drive the vehicle in conditions where stability and power may be los
18. you drive the vehicle with your hands lightly touching the steer ing wheel this may also be detected as no handed driving E After the vehicle has been parked in the sun The LKA system functions may not be available and a warning message gt P 708 will be displayed for a while after driving has started In such cases turn the LKA sys tem off and turn it on again after normal temperature returns When the temperature in the cabin decreases and the temperature around the camera sensor P 228 becomes suitable for its operation the functions will begin to operate GS350_U OM30C34U 234 4 5 Using the driving support systems E lf there are lane markers on only one side of the vehicle The lane keeping assist function will not operate Also the lane departure warning will not operate for the side on which lane markers could not be recognized E Conditions in which the function may not operate correctly In the following conditions the LKA system functions may not operate or it may not be possible to ensure adequate performance Also the camera sensor may be unable to recognize lane lines causing the lane departure warning function to oper ate incorrectly or the lane keeping assist function may not operate properly How ever this does not indicate a malfunction When driving through an area with no lane markers such as a tollbooth a crossing or before a ticket checkpoint When driving ona sharp curve When lanes
19. 0_U OM30C34U 4 5 Using the driving support systems 217 Canceling and resuming the speed control C Pulling the lever toward you can cels the cruise control The speed setting is also canceled when the brakes are applied 2 Pushing the lever up resumes the cruise control and returns vehicle speed to the set speed iNascson Resuming is available when the vehi cle speed is more than approximately 25 mph 40 km h GS350_U OM30C34U s A 218 4 5 Using the driving support systems l Driving in vehicle to vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 400 ft 120 m ahead determines the current vehicle to vehicle following distance and operates to maintain a suitable following distance from the vehicle ahead Note that vehicle to vehicle distance will close in when traveling on long downhill slopes Y y f p IN45G5015 1 Example of constant speed cruising When there are no vehicles ahead The vehicle travels at the speed set by the driver The desired vehicle to vehicle distance can also be set by operating the vehicle to vehicle distance control 2 Example of deceleration cruising When the vehicle ahead is driving slower than the set speed When a vehicle is detected running ahead of you the system automatically decel erates your vehicle When a greater reduction in vehicle speed is necessar
20. 4 5 Using the driving support systems 209 Cruise control Summary of functions Use the cruise control to maintain a set speed without depressing the accelerator pedal C Indicators 2 Cruise control switch IN45GS026 Setting the vehicle speed Press the ON OFF button to P Z activate the cruise control Cruise control indicator will come on Press the button again to deactivate the cruise control IN45GS002 2 Accelerate or decelerate the vehicle to the desired speed and push the lever down to set the speed SET indicator will come on The vehicle speed at the moment the lever is released becomes the set IN45GS003 speed If equipped GS350_U OM30C34U 210 4 5 Using the driving support systems l Adjusting the set speed To change the set speed operate the lever until the desired set speed is obtained C Increases the speed 2 Decreases the speed Fine adjustment Momentarily move the lever in the desired direction Large adjustment Hold the lever in the desired direction IN45GS004 The set speed will be increased or decreased as follows Fine adjustment By approximately 1 mph 1 6 km h each time the lever is oper ated Large adjustment The set speed can be increased or decreased continually until the lever is released Canceling and resuming the constant speed control C Pullin
21. 5 Using the driving support systems 267 E Operation of the air conditioning system in Eco drive mode Eco drive mode controls the heating cooling operations and fan speed of the air conditioning system to enhance fuel efficiency P 345 To improve air condition ing performance adjust the fan speed or turn off Eco drive mode E Automatic operation of the seat heater during Eco drive mode If the driving mode select switch is switched to Eco drive mode in cold temperatures the seat heater will be automatically operated to assist heating performance E Sport mode automatic deactivation Sport mode is automatically deactivated if the engine switch is turned off after driv ing in sport mode GS350_U OM30C34U BulAliq 268 4 5 Using the driving support systems Driving assist systems To help enhance driving safety and performance the following systems operate automatically in response to various driving situations Be aware however that these systems are supplementary and should not be relied upon too heavily when operating the vehicle ABS Anti lock Brake System Helps to prevent wheel lock when the brakes are applied suddenly or if the brakes are applied while driving on a slippery road surface Brake assist Generates an increased level of braking force after the brake pedal is depressed when the system detects a panic stop situation VSC Vehicle Stability Control Helps the driver to control s
22. 8 inch display insert display 12 3 inch display 2 0 ft 60 cm to 1 5 ft 45 cm continuous continuous blinking continuous 1 5 ft 45 cm to 1 0 ft 30 cm continuous continuous blinking rapidly continuous Less than 1 0 ft 30 cm blinking continuous continuous continuous GS350_U OM30C34U Bunuq EN 244 E Rear center sensor 4 5 Using the driving support systems Approximate distance to obstacle Multi information display Remote Touch screen 8 inch display insert display 12 3 inch display 49 tt 150 cm to 2 0 ft 60 cm continuous blinking slowly continuous 2 0 ft 60 cm to 1 5 ft 45 cm continuous blinking continuous 1 5 ft 45 cm to 11 ft 35 cm continuous blinking rapidly continuous Less than 11 ft 35 cm blinking continuous continuous GS350_U OM30C34U 4 5 Using the driving support systems 245 m Buzzer operation and distance to an obstacle A buzzer sounds when the corner sensors and rear center sensors are operating The buzzer beeps faster as the vehicle approaches an obstacle When the vehicle comes within the following distance of the obsta cle the buzzer sounds continuously Front center sensors Approximately 1 0 ft
23. U OM30C34U 4 5 Using the driving support systems 235 When driving on winding roads or roads that are uneven When driving on rough or unpaved roads E When changing the tires Depending on the tires used sufficient performance may not be maintainable E Warning messages for LKA Warning messages are used to indicate a system malfunction or to inform the driver of the need for caution while driving P 700 708 A CAUTION E Before using the LKA system Do not rely solely on the LKA system The LKA system does not drive the vehicle automatically nor does it reduce the amount of care you need to take As such the driver must always assume full responsibility for understanding his her surround ings for operating the steering wheel to correct the driving line and for driving safely Inappropriate or negligent driving could lead to an accident E To avoid operating the LKA by mistake Switch the LKA off using the LKA switch when not in use E Situations unsuitable for LKA Do not use LKA in any of the following situations Otherwise the system may not function correctly and could result in an accident When driving with snow tires tire chains a spare tire or similar equipment When the tires have been excessively worn or when the tire inflation pressure is low When there are objects or structures along the roadside that might be misinter preted as lane markers such as guardrails curb reflector p
24. U OM30C34U 4 5 Using the driving support systems 271 E Turning off both TRAC VSC systems To turn the TRAC VSC systems off press and hold the button for more than 3 seconds while the vehicle is stopped The VSC OFF indicator light will come on and the TRAC OFF will be shown on the multi information display Press the button again to turn the systems back on IN45GS0433 J lt a GS350_U OM30C34U 272 4 5 Using the driving support systems E When the message is displayed on the multi information display showing that TRAC has been disabled even if the VSC OFF switch has not been pressed TRAC cannot be operated Contact your Lexus dealer E VGRS is disabled when VGRS may stop operating in the following situations In this event the steering wheel may move from its straight forward position but it will return when the system restarts The steering wheel is operated for an extended period of time while the vehicle is stopped or is moving very slowly When force is continuously applied for a long time with the steering wheel turned as far as it will go The center position of the steering wheel may change when VGRS is disabled How ever the position will return to normal after VGRS is reactivated E When the battery is disconnected The steering wheel may move from its straight forward position but this will be cor rected automatically when driving E Sounds and vi
25. before the collision occurs The same will happen if the driver makes an emergency braking or loses control of the vehicle P 32 Pre collision brake assist When there is a high possibility of a frontal collision the system applies greater braking force in relation to how strongly the brake pedal is depressed Pre collision braking When there is a high possibility of a frontal collision the system warns the driver using a warning light warning display and buzzer If the sys tem determines that a collision is unavoidable the brakes are automati cally applied to reduce the collision speed If equipped GS350_U OM30C34U 4 5 Using the driving support systems 279 Suspension control if equipped When the system determines that a collision is unavoidable the opera tion of AVS gt P 269 optimally controls the damping force of the shock absorber Steering control if equipped gt Vehicles with VGRS There is a high possibility of collision and if the steering wheel is oper ated the steering gear ratio is changed by VGRS to help improve the response to steering input gt Vehicles with LDH There is a high possibility of collision and if the steering wheel is oper ated the steering angles of the front and rear wheels and the heaviness of the steering wheel are controlled by LDH thus heightening respon siveness in response to the steering operation Driver monitor system if
26. brations caused by the ABS brake assist VSC TRAC and VGRS sys tems A sound may be heard from the engine compartment when the engine is started or just after the vehicle begins to move This sound does not indicate that a malfunc tion has occurred in any of these systems Any of the following conditions may occur when the above systems are operating None of these indicates that a malfunction has occurred Vibrations may be felt through the vehicle body and steering A motor sound may be heard after the vehicle comes to a stop The brake pedal may pulsate slightly after the ABS is activated The brake pedal may move down slightly after the ABS is activated E EPS VGRS and DRS operation sound When the steering wheel is operated a motor sound whirring sound may be heard This does not indicate a malfunction E Reactivation of the TRAC VSC systems Even after the TRAC VSC systems have been turned off turning the engine off and then on again will automatically reactivate the TRAC VSC systems GS350_U OM30C34U 4 5 Using the driving support systems 273 E Reactivation of the TRAC system linked to vehicle speed When only the TRAC system is turned off the TRAC system will turn on when vehi cle speed increases However when both TRAC VSC systems are turned off the systems will not turn on even when vehicle speed increases E Reduced effectiveness of the EPS system The effectiveness of the EPS system is reduced to prevent
27. by the party responsible for com pliance could void the user s authority to operate the equipment Radio frequency radiation exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncon trolled environment This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body This transmitter must not be co located or operating in conjunction with any other antenna or transmitter gt For vehicles sold in Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interfer ence that may cause undesired operation of the device GS350_U OM30C34U BulAliq 224 4 5 Using the driving support systems A CAUTION E Before using dynamic radar cruise control Do not overly rely on vehicle to vehicle distance control Be aware of the set speed If automatic deceleration acceleration is not appropri ate adjust the vehicle speed as well as the distance between your vehicle and vehi cles ahead by applying the brakes etc E Cautions regarding the driving assist systems Observe the following precautions Failure to do so may cause an accident resulting in death or serious injury Assisting the driver to measure following distance The dynamic radar cruise control is only intended to help the driver in determin ing th
28. ccelerator is applied GS350_U OM30C34U 220 4 5 Using the driving support systems Selecting conventional constant speed control mode When constant speed control mode is selected your vehicle will maintain a set speed without controlling the vehicle to vehicle distance Select this mode only when vehicle to vehicle distance control mode does not func tion correctly due to dirt etc C Press the ON OFF button to activate the cruise control Press the button again to deactivate the cruise control 2 Switch to constant speed control mode Push the lever forward and hold for approximately one second Constant speed control mode indica tor will come on When in constant speed control mode to return to vehicle to vehicle distance control mode push the lever forward again and hold for approxi mately 1 second After the desired speed has been set it is not possible to return to vehicle to vehicle distance control mode If the engine switch is turned off and then turned to IGNITION ON mode again the vehicle will automatically return to vehicle to vehicle distance control mode Adjusting the speed setting P 210 Canceling and resuming the speed setting gt P 210 GS350_U OM30C34U 4 5 Using the driving support systems 221 E Dynamic radar cruise control can be set when The shift lever is in D Range 4 or higher of D has been selected by using the paddle shift Vehi
29. ch is pressed while the Lexus night view cannot be operated Advice information will be displayed on the Lexus night view screen Follow the dis played advice E lf the Lexus night view switch is pressed at a time when the Lexus night view opera tion is not possible Follow the advice displayed on the Remote Touch screen E When the shift lever is shifted to R while the Lexus night view is operating The Lexus night view screen switches as follows Main Display Switches to the rear view monitor system screen Side Display The display blacks out and no image is displayed GS350_U OM30C34U 296 4 5 Using the driving support systems A CAUTION E Before using the Lexus night view Never depend on this system only Lexus night view is intended as a supplemental aid to help you see pedestrians and road conditions ahead of the vehicle As there are limits to the system do not rely solely on the system while in use and drive safely while observing the following precautions E When using the Lexus night view Observe the following precautions Failure to do so may cause an accident resulting in death or serious injury Never drive while looking at the Lexus night view screen only Do not look continuously at the Lexus night view screen while driving Pedestri ans objects etc ahead of the vehicle may be overlooked by the system The sys tem should always be used as a supplemental aid only
30. cker or other items to the windshield near the camera sensor Do not install or place anything near the camera ee a Bios IN45GS064 When adjusting the rear view mirror make sure that it does not block the camera lens Do not attach window tinting to the windshield Do not install an antenna in front of the camera lens f the windshield is fogged up use the windshield defogger to remove fog from the windshield When it is cold using the heater with air blowing to the feet may allow the upper part of the windshield to fog up This will have a negative effect on the images GS350_U OM30C34U 4 5 Using the driving support systems 237 NOTICE Do not place anything on the dashboard The camera sensor may recognize the image reflected on the windshield as lane markers by mistake Do not scratch the camera lens or let it get dirty When cleaning the inside of the windshield be careful not to get any glass cleaner etc on the lens Also do not touch the lens For lens repair contact your Lexus dealer Do not change the installation position or direction of the camera sensor or remove it The direction of the camera sensor is precisely adjusted Do not subject the camera sensor to strong impact or force and do not disas semble the camera sensor GS350_U OM30C34U BulAliq 238 4 5 Using the driving support systems Intuitive parking assist The distance from your vehicle to nearb
31. cle speed is above approximately 30 mph 50 km h E Accelerating after setting the vehicle speed The vehicle can accelerate normally After acceleration the set speed resumes However during vehicle to vehicle distance control mode the vehicle speed may decrease below the set speed in order to maintain the distance to the vehicle ahead E Automatic cancelation of vehicle to vehicle distance control Vehicle to vehicle distance control driving is automatically canceled in the following situations Actual vehicle speed falls below approximately 25 mph 40 km h VSC is activated TRAC is activated for a period of time When the VSC or TRAC system is turned off by pressing the VSC OFF switch The sensor cannot operate correctly because it is covered in some way The windshield wipers are operating at high speed when the wipers are in AUTO mode or the high speed wiper operation When snow mode is set If vehicle to vehicle distance control driving is automatically canceled for any other reason there may be a malfunction in the system Contact your Lexus dealer GS350_U OM30C34U BulAliq 222 4 5 Using the driving support systems E Automatic cancelation of constant speed control The cruise control will stop maintaining the vehicle speed in the following situations Actual vehicle speed is more than approximately 10 mph 16 km h below the set vehicle speed At this time the memorized set speed is not retain
32. creen may vary according to vehicle ori entation conditions Objects which are close to either corner of the bumper or under the bumper cannot be seen on the screen The camera uses a special lens The distance of the image that appears on the screen differs from the actual distance Items which are located higher than the camera may not be dis played by the monitor GS350_U OM30C34U J Z gt a 254 4 5 Using the driving support systems m Rear view monitor system camera The camera for the rear view monitor system is located above the license plate IN45GS038s Using the camera If the camera lens becomes dirty it cannot transmit a clear image It water droplets snow or mud adhere to the lens rinse with water and wipe with a soft cloth If the lens is extremely dirty wash it with a mild cleanser and rinse E Differences between the screen and the actual road The distance guide lines and the vehicle width extension guide lines may not actually be parallel with the dividing lines of the parking space even when they appear to be so Be sure to check visually The distances between the vehicle width extension guide lines and the left and right dividing lines of the parking space may not be equal even when they appear to be so Be sure to check visually The distance guide lines give a distance guide for flat road surfaces In any of the following situations there is
33. cted while the rear view monitor system is in use the warn ing indicator will appear in the top right of the screen even if the display setting has been set to off E Sensor detection information The sensor s detection areas are limited to the areas around the vehicle s front cor ner and rear bumpers Certain vehicle conditions and the surrounding environment may affect the ability of the sensor to correctly detect obstacles Particular instances where this may occur are listed below There is dirt snow or ice on the sensor Wiping the sensors will resolve this problem The sensor is frozen Thawing the area will resolve this problem In especially cold weather if a sensor is frozen the screen may show an abnor mal display or obstacles may not be detected The sensor is covered in any way The vehicle is leaning considerably to one side Onan extremely bumpy road on an incline on gravel or on grass The vicinity of the vehicle is noisy due to vehicle horns motorcycle engines air brakes of large vehicles or other loud noises producing ultrasonic waves There is another vehicle equipped with parking assist sensors in the vicinity The sensor is coated with a sheet of spray or heavy rain The vehicle is equipped with a fender pole or wireless antenna Towing eyelets are installed The bumper or sensor receives a strong impact The vehicle is approaching a tall or curved curb In harsh sunlight or in
34. e collision system can function effectively Otherwise the system may not function correctly and could result in an accident Keep the sensor and grille cover clean at all times Clean the sensor and grille cover with a soft cloth so you do not mark or damage them Do not subject the sensor or surrounding area to a strong impact If the sensor moves even slightly off position the system may malfunction If the sensor or surrounding area is subject to a strong impact always have the area inspected and adjusted by your Lexus dealer Do not disassemble the sensor Do not attach accessories or stickers to the sensor grille cover or surrounding area Do not modify or paint the sensor and grille cover Do not replace them with non genuine parts E Determining the direction the driver is facing and whether the driver s eyes are open or closed The direction the driver is facing and whether the driver s eyes are open or closed may not be determined correctly if the following conditions exist There is an object between the driver monitor sensor and the driver s face such as when the sensor is blocked A part of the driver s face is covered The sensor or the driver s face is exposed to intense light such as sunlight The driving posture is improper GS350_U OM30C34U 4 5 Using the driving support systems 285 A CAUTION E Handling the driver monitor sensor Observe the following to ensure th
35. e driver monitor sensor can function effectively Failure to do so may result in a malfunction or may prevent the system from cor rectly determining the direction the driver is facing resulting in an unexpected accident Do not disassemble damage lift or pull on the sensor Do not select the sensor while driving Do not wet or spill water on the sensor Do not drop anything on or allow anything to hit against the sensor Do not sub ject the sensor to an impact Make sure that there are no scratches dirt or stickers on the side of the sensor that faces the driver Do not place any objects in front of the side of the sensor that faces the driver or cover the sensor GS350_U OM30C34U BulAliq 286 4 5 Using the driving support systems A CAUTION E Cautions regarding the assist contents of the system By means of alarms and brake control the pre collision system is intended to assist the driver in avoiding collisions through the process of LOOK JUDGE ACT There are limits to the degree of assistance the system can provide so please keep in mind the following important points Assisting the driver in watching the road The pre collision system is only able to detect obstacles directly in front of the vehicle and only within a limited range It is not a mechanism that allows careless or inattentive driving and it is not a system that can assist the driver in low visibil ity conditions
36. e following distance between the driver s own vehicle and a designated vehicle traveling ahead It is not a mechanism that allows careless or inattentive driving and it is not a system that can assist the driver in low visibility conditions It is still necessary for driver to pay close attention to the vehicle s surroundings Assisting the driver to judge proper following distance The dynamic radar cruise control determines whether the following distance between the driver s own vehicle and a designated vehicle traveling ahead is appropriate or not It is not capable of making any other type of judgement Therefore it is absolutely necessary for the driver to remain vigilant and to deter mine whether or not there is a possibility of danger in any given situation Assisting the driver to operate the vehicle The dynamic radar cruise control has no capability to prevent or avoid a collision with a vehicle traveling ahead Therefore if there is ever any danger the driver must take immediate and direct control of the vehicle and act appropriately in order to ensure the safety of all involved GS350_U OM30C34U 4 5 Using the driving support systems 225 A CAUTION E To avoid inadvertent cruise control activation Switch the cruise control off using the ON OFF button when not in use E Situations unsuitable for dynamic radar cruise control Do not use dynamic radar cruise control in any of the following situations Doin
37. e system may not function correctly due to a sensor malfunction etc Have the vehicle checked by your Lexus dealer The intuitive parking assist operation display flashes and a beep sounds when no obstacles are detected f the area around a sensor collides with something or is subjected to strong impact f the bumper collides with something f the display shows continuously without a beep f a display error occurs first check the sensor If the error occurs even if there is no ice snow or mud on the sensor it is likely that the sensor is malfunctioning E Notes when washing the vehicle Do not apply intensive bursts of water or steam to the sensor area Doing so may result in the sensor malfunctioning GS350_U OM30C34U 4 5 Using the driving support systems 251 Rear view monitor system The rear view monitor system assists the driver by displaying an image of the view behind the vehicle and fixation guide lines while backing up for example while parking The screen illustrations used in this text are intended as examples and may differ from the image that is actually displayed on the screen Rear view monitor system will acti vate when the shift lever is in R If you move the lever out of R the rear view monitor system will be deacti vated When the shift lever is shifted to the R f position and any mode button such as MENU is pressed the rear view monitor system is canceled and the
38. ed Vehicle speed falls below approximately 25 mph 40 km h VSC is activated TRAC is activated for a period of time When the VSC or TRAC system is turned off by pressing the VSC OFF switch E When the LKA Lane Keeping Assist will be activated Using the radar cruise control in vehicle to vehicle distance control mode lane keeping assistance control is activated E Radar sensor and grille cover Always keep the sensor and grille cover clean to ensure that the vehicle to vehicle distance control operates properly Some obstructions such as snow ice and plastic objects cannot be detected by the obstruction sensor Dynamic radar cruise control is canceled if an obstruction is detected Grille cover Radar sensor IN45GS014 E Warning messages and buzzers for dynamic radar cruise control Warning messages and buzzers are used to indicate a system malfunction or to inform the driver of the need for caution while driving P 700 GS350_U OM30C34U 4 5 Using the driving support systems 223 E Certification gt For vehicles sold in the U S A FCC ID HYQDNMWR004 This device complies with Part 15 of the FCC Rules Operation is subject to the fol lowing two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC WARNING Changes or modifications not expressly approved
39. ed by your Lexus dealer as soon as possi ble GS350_U OM30C34U 4 5 Using the driving support systems 263 Driving mode select switch The driving modes can be selected to suit driving condition Vehicles without AVS i Normal mode For normal driving Press the switch to change the driving mode to normal mode when selected to Eco mode or sport mode 2 Eco drive mode Use Eco mode to help achieve low fuel consumption during trips that involve frequent accelerating When the driving mode select switch is turned left the ECO MODE indicator comes on in the multi information display GS350_U OM30C34U 264 4 5 Using the driving support systems 3 Sport mode An acceleration response suitable for sports driving is provided by con trolling steering response and transmission Suitable for when precise handling is desirable for example when driving on mountain roads When the driving mode select switch is turned right the SPORT indicator comes on in the instrument cluster Also on vehicles equipped with a 12 3 inch display the driving mode is also automatically displayed on the Side Display P 308 N45GS109 GS350_U OM30C34U 4 5 Using the driving support systems 265 Vehicles with AVS M Normal mode For normal driving IN45GS0453 Press the switch to change the driving mode to normal mode when selected
40. ehicle to vehicle distance but ton 2 Display Q Set speed 4 Indicators 5 Cruise control switch If equipped GS350_U OM30C34U 214 4 5 Using the driving support systems Setting the vehicle speed vehicle to vehicle distance control mode Press the ON OFF button to activate the cruise control Radar cruise control indicator will come on Press the button again to deactivate the cruise control 2 Accelerate or decelerate the vehicle to the desired speed and push the lever down to set the speed SET indicator will be displayed The vehicle speed at the moment the lever is released becomes the set speed GS350_U OM30C34U 4 5 Using the driving support systems 215 Adjusting the set speed To change the set speed operate the lever until the desired set speed is displayed C Increases the speed 2 Decreases the speed Fine adjustment Momentarily move the lever in the desired direction Large adjustment Hold the lever in the desired direction IN45GS010 Inthe vehicle to vehicle distance control mode the set speed will be increased or decreased as follows When the set speed is shown in MPH Fine adjustment By approximately 1 mph 1 6 km h each time the lever is operated Large adjustment By approximately 5 mph 8 km h for each 0 75 seconds
41. ensor or surrounding area on the bumper Do not paint the sensor or surrounding area on the bumper GS350_U OM30C34U 4 5 Using the driving support systems 293 Lexus night view Lexus night view is a system which assists with nighttime driving Near infrared rays are irradiated forward and an image converted from the irradiated light is shown on the Remote Touch screen The image shows pedestrians obstacles and road conditions ahead of the vehicle which are difficult to see at nighttime with the naked eye Displaying the Lexus night view N The headlights turn on w Press the Lexus night view switch The Lexus night view is displayed on the Remote Touch screen To return the screen to its previous state press the switch again When the light sensor gt P 193 determines that it is currently night time from the brightness of the sur rounding area the Lexus night view can be operated by pressing the Lexus night view switch while the headlights are on GS350_U OM30C34U Turn the engine switch to IGNITION ON mode gt TR el Rhee ee s ae ee s ie it IN45GS052b If equipped 294 4 5 Using the driving support systems The Lexus night view display m When displaying on the Main Display P 308 IN45GS1248 C Lexus night view screen D Side Display switching button If this button is selected usi
42. ess the brake pedal when the vehicle is stopped com pletely A buzzer will sound once to indicate the system is activated The slip indica tor will also start flashing IN45GS056s BHill start assist control operating conditions The system operates in the following situations The shift lever is in a position other than P The parking brake is not applied The accelerator pedal is not depressed Hill start assist control cannot be operated while the slip indicator light is illumi nated BHill start assist control While hill start assist control is operating the brakes remain automatically applied after the driver releases the brake pedal The stop lights and the high mounted stoplight turn on Hill start assist control operates for about 2 seconds after the brake pedal is released f the slip indicator does not flash and the buzzer does not sound when the brake pedal is further depressed slightly reduce the pressure on the brake pedal do not allow the vehicle to roll backward and then firmly depress it again If the system still does not operate check that the operating conditions explained above have been met GS350_U OM30C34U 4 5 Using the driving support systems 277 BHill start assist control buzzer When hill start assist control is activated the buzzer will sound once In the following situations hill start assist control will be canceled and the buzzer will sound twice
43. following symptoms refer to the likely cause and the solution and re check If the symptom is not resolved by the solution have the vehicle inspected by your Lexus dealer Symptom Likely cause Solution The image is difficult to see The vehicle is in a dark area The temperature around the lens is either high or low e The outside tempera ture is low There are water drop lets onthe camera It is raining or humid Foreign matter mud etc is adhering to the camera There are scratches on the camera Sunlight or headlights are shining directly into the camera The vehicle is under flu orescent lights sodium lights mercury lights etc If this happens due to these causes it does not indicate a malfunction Back up while visually checking the vehicle s surroundings Use the monitor again once con ditions have been improved To adjust the image on the rear view monitor sys tem screen P 310 The image is blurry Dirt or foreign matter such as water droplets snow mud etc is adher ing to the camera Rinse the camera lens with water and wipe it clean with a soft cloth Wash with a mild soap if the dirt is stubborn GS350_U OM30C34U 4 5 Using the driving support systems 259 Symptom Likely cause Solution The image is out of align ment The camera or surround ing area has received a strong impact Have the veh
44. g so may result in inappropriate speed control and could cause an accident resulting in death or serious injury In heavy traffic On roads with sharp bends On winding roads On slippery roads such as those covered with rain ice or snow On steep downhills or where there are sudden changes between sharp up and down gradients Vehicle speed may exceed the set speed when driving down a steep hill At entrances to expressways When weather conditions are bad enough that they may prevent the sensors from functioning correctly fog snow sandstorm heavy rain etc When an approach warning buzzer is heard often During emergency towing GS350_U OM30C34U Bunuq 226 4 5 Using the driving support systems A CAUTION E When the sensor may not be correctly detecting the vehicle ahead Apply the brakes as necessary when any of the following types of vehicles are in front of you As the sensor may not be able to correctly detect these types of vehicles the approach warning gt P 219 will not be activated and a fatal or serious accident may result Vehicles that cut in suddenly Vehicles traveling at low speeds Vehicles that are not moving Vehicles with small rear ends trailers with no load on board etc Motorcycles traveling in the same lane E Conditions under which the vehicle to vehicle distance control may not function correctly Apply the brakes as necessary in
45. g the lever toward you can cels the constant speed control The speed setting is also canceled when the brakes are applied 2 Pushing the lever up resumes the constant speed control IN45GS005 Resuming is available when the vehi cle speed is more than approximately 25 mph 40 km h GS350_U OM30C34U 4 5 Using the driving support systems 211 E Cruise control can be set when The shift lever is in D Range 4 or higher of D has been selected by using the paddle shift Vehicle speed is above approximately 25 mph 40 km h E Accelerating after setting the vehicle speed The vehicle can be accelerated normally After acceleration the set speed resumes Even without canceling the cruise control the set speed can be increased by first accelerating the vehicle to the desired speed and then pushing the lever down to set the new speed E Automatic cruise control cancelation Cruise control will stop maintaining the vehicle speed in any of the following situa tions Actual vehicle speed falls more than approximately 10 mph 16 km h below the preset vehicle speed At this time the memorized set speed is not retained Actual vehicle speed is below approximately 25 mph 40 km h VSC is activated TRAC is activated for a period of time When the VSC or TRAC system is turned off by pressing the VSC OFF switch E f the warning message for the cruise control is shown on the multi info
46. he fol lowing two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC WARNING Changes or modifications not expressly approved by the party responsible for com pliance could void the user s authority to operate the equipment Radio frequency radiation exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncon trolled environment This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body This transmitter must not be co located or operating in conjunction with any other antenna or transmitter gt For vehicles sold in Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interfer ence that may cause undesired operation of the device GS350_U OM30C34U BulAliq 284 4 5 Using the driving support systems A CAUTION E Limitations of the pre collision system Do not overly rely on the pre collision system Always drive safely taking care to observe your surroundings and checking for any obstacles or other road hazards Failure to do so may cause an accident resulting in death or serious injury E Handling the radar sensor Observe the following to ensure the pr
47. head of you is greater than about 19 mph 30 km h Pre collision alert braking The system determines that the driver is not facing forward or that the driver s eyes are closed Vehicle speed is greater than about 25 mph 40 km h The speed at which your vehicle is approaching the vehicle running ahead of you is greater than about 25 mph 40 km h The steering is not being turned GS350_U OM30C34U a 282 4 5 Using the driving support systems E Conditions that may trigger the system even if there is no danger of a collision When there is an object by the roadside at the entrance to a curve When passing an oncoming vehicle on a curve When driving over a narrow iron bridge When there is a metal object on the road surface When driving on an uneven road surface When passing an oncoming vehicle on a left turn When your vehicle rapidly closes on the vehicle in front When a grade separation interchange sign billboard or other structure appears to be directly in the vehicle s line of travel When climbing a steep hill causes an overhead billboard or other metallic structure to appear directly in the vehicle s line of travel When the system is activated in the situations described above there is also a possi bility that the seat belts will retract quickly and the brakes will be applied with a force greater than normal When the seat belt is locked in the retracted position stop the vehicle in a safe place
48. hen the rear view monitor system is displayed insert dis play A simplified image is displayed on the right upper corner of the Remote Touch screen when en ea aaa obstacle is detected gt For 12 3 inch display A graphic will be shown on the 5IGSO57ME LEXUS Park Assist side display ge A graphic is automatically dis played when an obstacle is detected The screen can be set so that the graphic is not displayed P 246 145GS131 GS350_U OM30C34U BulAliq 242 4 5 Using the driving support systems Sensor detection display obstacle distance E Front center sensor Remote Touch screen Approximate pte 8 inch distance to obstacle onmation 8 inch display 12 3 inch display display insert display display 3 3 ft 100 cm to 1 6 ft 50 cm continuous continuous blinking continuous slowly 1 6 ft 50 cm to 1 2 ft 37 5 cm continuous continuous blinking continuous 1 2 ft 37 5 cm to 1 0 ft 30 cm continuous continuous blinking continuous rapidly Less than 1 0 ft 30 cm blinking continuous continuous continuous GS350_U OM30C34U E Corner sensors 4 5 Using the driving support systems 243 Approximate distance to obstacle Multi information display Remote Touch screen 8 inch display
49. high or low The sensor voltage has become abnormal E Certification for the BSM gt For vehicles sold in the U S A FCC ID OAYBSDTX This device complies with part 15 of the FCC Rules Operation is subject to the fol lowing three conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation 3 This device may only work when the vehicle is in operation pursuant to 15 252 a 4 FCC WARNING Changes or modifications not expressly approved by the party responsible for com pliance could void the user s authority to operate the equipment gt For vehicles sold in Canada IC 4135A BSDTX This device complies with the radio standards specification RSS 220 of Industry Canada Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation NOTE During printing time of this user manual the approvals listed below are granted Fur ther countries may become available or actual certification identifiers may be sub ject to change or update WARNING Changes or modifications not expressly approved by the party responsible for com pliance could void the user s authority to operate the equipment GS350_U OM30C34U BulAliq 292 4 5 Using the driving support
50. icle inspected by your Lexus dealer The fixation guide lines are very far out of align ment The camera position is out of alignment Have the vehicle inspected by your Lexus dealer GS350_U OM30C34U BulAliq 260 4 5 Using the driving support systems A CAUTION E When using the rear view monitor system When backing up be sure to check visually behind and all around the vehicle before proceeding Observe the following precautions to avoid an accident that could result in death or serious injuries The rear view monitor system is a supplemental device intended to assist the driver when backing up Never depend on the rear view monitor system entirely when backing up Always make sure your intended path is clear Use caution just as you would when backing up any vehicle Never back up while looking only at the screen The image shown on the screen may differ from the actual state and you could collide with another vehicle or obstacles if backing up looking only at the screen possibly causing an accident When backing up be sure to check in front of and behind the vehicle both directly and with mirrors Be sure to back up slowly depressing the brake pedal to control vehicle speed The instructions given are only guidelines When and how much to turn the steering wheel will vary according to traffic con ditions road surface conditions vehicle condition etc when
51. ide lines are wider than the actual width of the vehicle When backing up be sure to check behind and all around the vehicle direct visually and with mirror before proceeding GS350_U OM30C34U BulAliq 262 4 5 Using the driving support systems NOTICE E How to use the camera The rear view monitor system may not operate properly in the following cases or if the precautions described below are not followed Ifthe back of the vehicle is hit the position and mounting angle of the camera may change As the camera has a water proof construction do not detach disassemble or modify it This may cause incorrect operation Do not strongly rub the camera lens If the camera lens is scratched it cannot transmit a clear image Do not allow organic solvent car wax window cleaner or glass coat to adhere to the camera If this happens wipe it off as soon as possible If the temperature changes rapidly such as when hot water is poured on the vehicle in cold weather the system may not operate normally When washing the vehicle do not apply intensive bursts of water to the cam era or camera area Doing so may result in the camera malfunctioning When the camera is used under fluorescent lights sodium light or mercury light etc the lights and the illuminated areas may appear to flicker Do not expose the camera to strong impact as this could cause a malfunction If this happens have the vehicle inspect
52. is on the lane line display and steering wheel dis play are shown i Lane keeping assist function operation indication Steering wheel displayed Indicates that the function is currently operating If the lane departure warn ing operates at this time the steering wheel flashes orange Steering wheel not displayed Indicates that the function is not cur rently operating When the lane keeping assist function is canceled the buzzer will beep twice 2 Dynamic radar cruise control dis play l45GS062a 3 Lane departure warning function indication when the inside of the white line is white The function has recognized lane markers If the lane departure warn ing operates at this time the lines flash orange 4 Lane departure warning function indication when the inside of the white line is black A lane marker is not recognized by the system or the LKA system func tions are temporarily canceled GS350_U OM30C34U 4 5 Using the driving support systems 233 E Temporary cancelation of the LKA system functions If any of the following occurs the LKA system functions will be temporarily canceled The functions will resume after the necessary operating conditions have returned The steering wheel is turned as far as necessary to cause the vehicle to change lanes When the system detects no handed driving The lane keeping assist function will be temporarily canceled bu
53. itch is set to on and vehicle speed is greater than approximately 25 mph 40 km h E The Blind Spot Monitor will detect a vehicle when A vehicle in an adjacent lane overtakes your vehicle Another vehicle enters the detection area when it changes lanes E Conditions under which the Blind Spot Monitor will not detect a vehicle The Blind Spot Monitor system is not designed to detect the following types of vehi cles and or objects Small motorcycles bicycles pedestrians etc Vehicles traveling in the opposite direction Guardrails walls signs parked vehicles and similar stationary objects Following vehicles that are in the same lane Vehicles driving 2 lanes across from your vehicle Depending on conditions detection of a vehicle and or object may occur GS350_U OM30C34U BulAliq 290 4 5 Using the driving support systems E Conditions under which the Blind Spot Monitor system may not function correctly The Blind Spot Monitor system may not detect vehicles correctly in the following conditions During bad weather such as heavy rain fog snow etc When ice or mud etc is attached to the rear bumper When driving ona road surface that is wet due to rain standing water etc When there is a significant difference in speed between your vehicle and the vehicle that enters the detection area When a vehicle is in the detection area from a stop and remains in the detection area as your vehicle
54. kidding when swerving suddenly or turning on slippery road surfaces Enhanced VSC Enhanced Vehicle Stability Control Provides cooperative control of the ABS TRAC VSC and EPS Helps to maintain directional stability when swerving on slippery road surfaces by controlling steering performance TRAC Traction Control Helps to maintain drive power and prevent the drive wheels from spin ning when starting the vehicle or accelerating on slippery roads Hill start assist control P 276 VGRS Variable Gear Ratio Steering if equipped Adjusts the front wheel turning angle in accordance with the vehicle speed and steering wheel movement GS350_U OM30C34U 4 5 Using the driving support systems 269 DRS Dynamic Rear Steering if equipped Contributes to the turning characteristics and responsiveness of the vehicle by slightly adjusting the rear wheel angle of the vehicle in accor dance with steering wheel movement EPS Electric Power Steering Employs an electric motor to reduce the amount of effort needed to turn the steering wheel AVS Adaptive Variable Suspension system if equipped By independently controlling the damping force of the shock absorbers for each of the 4 wheels according to the road and driving conditions this system combines riding comfort with superior steering stability and ensures good vehicle posture P 263 LDH Lexus Dynamic Handling system if
55. ng the Remote Touch when the Lexus night view is being shown on the Main Display the Side Display will change to a map dis play gt P 306 If the button is selected again the screen will return to its previous display Q Brightness adjustment button The brightness of the display can be adjusted by selecting this button using Remote Touch Make sure to select the OK after adjusting the brightness Darker Brighter GS350_U OM30C34U 4 5 Using the driving support systems 295 m When displaying on the Side Display When another screen is displayed on LEXUS Night View the Main Display while the Lexus AAE night view is being shown on the Main Display the Lexus night view screen will be displayed on the Side Display C Lexus night view screen Q Main Display switching but ton l145GS130a Switches the Lexus night view from the Side Display to the Main Dis play E Imaging range The image is shown ranging from the tip of the low beam to the high beam BulAliq E f the vehicle speed is less than approximately 9 mph 15 km h when the Lexus night view is operating An image will be displayed on the Lexus night view screen but both the range and the distance of the projection will be limited as near infrared rays are not being radi ated outward E When the Lexus night view swit
56. or is a system that assists the driver to confirm safety when changing lanes The system uses radar sensors to detect vehicles that are traveling in an adjacent lane in the area that is not reflected in the outside rear view mirror the blind spot and advises the driver of the vehicles existence via the outside rear view mirror indicator IN45GS057 C BSM main switch Pressing the switch turns the system on or off When the switch is set to on the switch s indicator illuminates 2 Outside rear view mirror indicator When a vehicle is detected in the blind spot the outside rear view mirror indica tor on that side illuminates If the turn signal lever is operated when a vehicle is in the blind spot the outside rear view mirror indicator flashes If equipped GS350_U OM30C34U 288 4 5 Using the driving support systems The Blind Spot Monitor detection areas The blind spot that vehicles can be detected in are outlined below The range of the detection area extends to C Approximately 11 5 ft 8 5 m from the side of the vehicle The first 1 6 ft 0 5 m from the side of the vehicle is not in the detection area 2 Approximately 9 8 ft 3 m from the rear bumper Q Approximately 3 3 ft 1 m for ward of the rear bumper IN45GS058 GS350_U OM30C34U 4 5 Using the driving support systems 289 E The Blind Spot Monitor system is operational when The BSM main sw
57. osts etc When driving on snowy roads When pavement lane markers are difficult to see due to rain snow fog etc When there are visible lines on the pavement from road repairs or if the remains of old lane markers are still visible on the road When driving on slippery roads such as those covered with rain ice or snow When driving in a lane other than the driving or passing lanes on a freeway or highway When driving on a road with lane closures due to maintenance or when driving in a temporary lane When emergency towing GS350_U OM30C34U 236 4 5 Using the driving support systems NOTICE E To prevent damage to or incorrect operation of the LKA system Do not modify the headlights or attach stickers to the surface of the lights Do not modify the suspension or sun visor or replace them with non genuine parts Do not install or place anything on the hood or the grille Also do not install a grille guard bull bars kangaroo bar etc Do not modify the sun visor or replace it with anything other than a genuine Lexus product f your windshield needs repairs contact your Lexus dealer E Camera sensor P 228 Observe the following to ensure that the LKA system functions correctly Keep the windshield clean at all times Performance could be affected if the windshield is dirty or if raindrops conden sation or ice are adhering to the windshield Do not attach a sti
58. parking It is neces sary to be fully aware of this before using the rear view monitor system When parking be sure to check that the parking space will accommodate your vehicle before maneuvering into it Do not use system in the following cases Onicy or slick road surfaces or in snow When using tire chains or the compact spare tire When the trunk lid is not closed completely On roads that are not flat or straight such as curves or slopes In low temperatures the screen may darken or the image may become faint The image could distort when the vehicle is moving or you may become unable to see the image on the screen Be sure to check direct visually and with mirror all around the vehicle before proceeding f the tire sizes are changed the position of the fixation guide lines displayed on the screen may change The camera uses a special lens The distances between objects and pedestrians that appear in the image displayed on the screen will differ from the actual dis tances P 254 GS350_U OM30C34U 4 5 Using the driving support systems 261 A CAUTION E When using the rear view monitor system screen The position of the fixation guide lines displayed on the screen may change in accordance with the number of passengers the amount of cargo etc Be sure to check behind and all around the vehicle direct visually and with mirror before proceeding The vehicle width extension gu
59. release the seat belt and refasten it E Obstacles not detected The sensor cannot detect plastic obstacles such as traffic cones There may also be occasions when the sensor cannot detect pedestrians animals bicycles motorcy cles trees or snowadritts E Situations in which the pre collision system does not function properly The system may not function effectively in situations such as the following On roads with sharp bends or uneven surfaces f a vehicle suddenly moves in front of your vehicle such as at an intersection f a vehicle suddenly cuts in front of your vehicle such as when overtaking In inclement weather such as heavy rain fog snow or sand storms When your vehicle is skidding such as the VSC system off When your vehicle is steeply inclined GS350_U OM30C34U 4 5 Using the driving support systems 283 E Automatic cancelation of the pre collision system When a malfunction occurs due to sensor contamination etc that results in the sen sors being unable to detect obstacles the pre collision system will be automatically disabled In this case the system will not activate even if there is a collision possibility E When there is a malfunction in the system PCS warning light will flash and warning messages will be displayed gt P 688 699 E Certification gt For vehicles sold in the U S A FCC ID HYQDNMWR004 This device complies with Part 15 of the FCC Rules Operation is subject to t
60. ring wheel P 233 GS350_U OM30C34U ea 230 4 5 Using the driving support systems Turning the LKA system on Press the LKA switch to activate the system LKA indicator will come on Press the switch again to turn the LKA system off The LKA system will revert to off each time the engine switch is turned to IGNITION ON mode IN45GS017 GS350_U OM30C34U 4 5 Using the driving support systems 231 l Operating conditions for each function m Lane departure warning function When the vehicle speed is approximately 30 mph 48 km h or more When the lane width is more than approximately 91 ft 2 8 m When driving on a straight road or through a curve with a radius of more than approximately 394 ft 120 m m Lane keeping assist function When the vehicle speed is between approximately 45 and 112 mph 72 and 180 km h When the vehicle to vehicle distance mode of the radar cruise control is on and the set vehicle speed is approximately 45 mph 72 km h or more the function will not operate when the radar cruise control is in set speed mode When the lane width is between approximately 91 and 131 tt 2 8 and 4 0 m When driving on a straight road or through a curve with a radius of more than approximately 755 ft 230 m GS350_U OM30C34U o ae 232 4 5 Using the driving support systems Indication on the multi information display When the LKA system
61. rmation dis play Press the ON OFF button once to deactivate the system and then press the but ton again to reactivate the system If the cruise control speed cannot be set or if the cruise control cancels immediately atter being activated there may be a malfunction in the cruise control system Have the vehicle inspected by your Lexus dealer GS350_U OM30C34U BulAliq 212 4 5 Using the driving support systems A CAUTION E To avoid operating the cruise control by mistake Switch the cruise control off using the ON OFF button when not in use E Situations unsuitable for cruise control Do not use cruise control in any of the following situations Doing so may result in loss of control and could cause an accident resulting in death or serious injury In heavy traffic On roads with sharp bends On winding roads On slippery roads such as those covered with rain ice or snow On steep hills Vehicle speed may exceed the set speed when driving down a steep hill During emergency towing GS350_U OM30C34U 4 5 Using the driving support systems 213 Dynamic radar cruise control Summary of functions Dynamic radar cruise control supplements conventional cruise control with a vehicle to vehicle distance control In vehicle to vehicle distance control mode the vehicle automatically accelerates or decelerates in order to maintain a set following distance from vehicles ahead C V
62. screen is switched to the mode of the button that was pressed GS350_U OM30C34U 252 4 5 Using the driving support systems Using the rear view monitor system E Screen description The rear view monitor system screen will be displayed if the shift lever is shifted to R while the engine switch is in IGNITION ON mode IN45GS117Ub i Vehicle width extension guide line The line indicates a guide path when the vehicle is being backed straight up The displayed width is wider than the actual vehicle width 2 Vehicle center guide lines These lines indicate the estimated vehicle center on the ground 3 Distance guide line The line shows points approximately 1 5 ft 0 5 m red from the center of the edge of the bumper 4 Distance guide line The line shows distance behind the vehicle a point approximately 3 ft 1 m blue from the edge of the bumper 5 Intuitive parking assist display if equipped If an obstacle is detected while the Intuitive parking assist sensor is on a dis play is shown in the top right corner of the screen GS350_U OM30C34U 4 5 Using the driving support systems 253 Rear view monitor system precautions m Area displayed on screen The rear view monitor system dis plays an image of the view from the bumper of the rear area of the vehicle To adjust the image on the rear view monitor system screen P 310 The area displayed on the s
63. such as the road It is not possible to determine the position of three dimensional objects such as vehicles using the distance guide lines When approaching a three dimensional object that extends out ward such as the flatbed of a truck be careful of the following Distance guidelines Visually check the surroundings and the area behind the vehicle On the screen it appears that a truck is parking at point 2 However in reality if you back up to point 1 you will hit the truck On the screen it appears that 1 is closest and 3 is furthest away However in reality the distance to 1 and 3 is the same and 2 is farther than 1 and IN45GS120Us GS350_U OM30C34U 4 5 Using the driving support systems 257 E Vehicle width extension guide lines Visually check the surroundings and the area behind the vehicle In the case shown below the truck appears to be outside of the vehicle width extension guide lines and the vehicle does not look as if it hits the truck However the rear body of the truck may actually cross over the vehicle width extension guide lines In reality if you back up as guided by the vehicle width extension guide lines the vehicle may hit the truck Vehicle width extension guide lines IN45GS097U GS350_U OM30C34U 258 4 5 Using the driving support systems Things you should know E Ifyou think something is wrong If you notice any of the
64. systems A CAUTION E Cautions regarding the use of the system The driver is solely responsible for safe driving Always drive safely taking care to observe your surroundings The Blind Spot Monitor is a supplementary system which alerts the driver that a vehicle is present in the blind spot Do not overly rely on the Blind Spot Monitor system The system cannot judge if it is safe to change lanes therefore over reli ance could cause an accident resulting in death or serious injury According to conditions the system may not function correctly Therefore the driver s own visual contirmation of safety is necessary E Handling the radar sensor One Blind Spot Monitor sensor is installed inside the left and right side of the vehi cle rear bumper respectively Observe the following to ensure the Blind Spot Monitor system can function correctly Keep the sensor and its surrounding area on the bumper clean at all times IN45GS059 Do not subject the sensor or surrounding area on the bumper to a strong impact If the sensor moves even slightly off position the system may malfunction and vehicles that enter the detection area may not be detected If the sensor or sur rounding area is subject to a strong impact always have the area inspected by your Lexus dealer Do not disassemble the sensor Do not attach accessories or stickers to the sensor or surrounding area on the bumper Do not modify the s
65. t E When the VSC is activated The slip indicator light flashes Always drive carefully Reckless driving may cause an accident Exercise particular care when the indicator light flashes E When the TRAC VSC systems are turned off Be especially careful and drive at a speed appropriate to the road conditions As these are the systems to ensure vehicle stability and driving force do not turn the TRAC VSC systems off unless necessary GS350_U OM30C34U 4 5 Using the driving support systems 275 A CAUTION E Replacing tires Make sure that all tires are of the specified size brand tread pattern and total load capacity In addition make sure that the tires are inflated to the recommended tire inflation pressure level The ABS TRAC and VSC systems will not function correctly if different tires are installed on the vehicle Contact your Lexus dealer for further information when replacing tires or wheels E Handling of tires and the suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems and may cause a system to malfunction GS350_U OM30C34U Bunuq 276 4 5 Using the driving support systems Hill start assist control Assists with starting off and temporarily maintains braking power even if the foot is removed from the brake pedal when starting off on an incline or a slippery slope To engage hill start assist control further depr
66. t the lane departure warning function will continue The turn signal lever is operated The vehicle speed deviates from the operating range of the LKA system functions The buzzer will beep twice when the lane keeping assist function is being can celed When the lane lines cannot be recognized while driving The buzzer will beep twice when the lane keeping assist function is being canceled The wiper switch is set on high speed mode or is set on AUTO mode with wipers operating at high speed The lane keeping assist function will be temporarily can celed but the lane departure warning function will continue If the vehicle crosses a line for approximately half a minute or more The lane keep ing assist function will be temporarily canceled but the lane departure warning function will continue When the lane departure warning function is activated The lane departure warning function will not operate again for a several seconds atter it has been activated even if the vehicle leaves the lane again E The lane departure warning It may be difficult to feel the sensory warning depending on the road conditions E No handed driving warning If the steering wheel is not operated for approximately 15 seconds on a straight road or approximately 5 seconds on a curve the buzzer will beep twice indicators on the multi information display will flash and the lane keeping assist function will be tem porarily canceled If
67. tense cold weather The area directly under the bumpers is not detected If obstacles draw too close to the sensor A non genuine Lexus suspension lowered suspension etc is installed People may not be detected if they are wearing certain types of clothing In addition to the examples above there are instances in which because of their shape signs and other objects may be judged by the sensor to be closer than they are GS350_U OM30C34U 4 5 Using the driving support systems 249 The shape of the obstacle may prevent the sensor from detecting it Pay particular attention to the following obstacles Wires fences ropes etc Cotton snow and other materials that absorb sound waves Sharply angled objects Low obstacles Tall obstacles with upper sections projecting outwards in the direction of your vehicle The following situations may occur during use Depending on the shape of the obstacle and other factors the detection dis tance may shorten or detection may be impossible Obstacles may not be detected if they are too close to the sensor There will be a short delay between obstacle detection and display Even at slow speeds there is a possibility that the obstacle will come within the sensor s detection areas before the display is shown and the warning beep sounds Thin posts or objects lower than the sensor may not be detected for collision when approached even if they have been detected once It might be
68. to Eco mode or sport mode 2 Eco drive mode Use Eco mode to help achieve low fuel consumption during trips that involve frequent accelerating When the driving mode select switch is turned left the ECO MODE indicator comes on in the multi information display GS350_U OM30C34U n FA 266 4 5 Using the driving support systems Sport mode gt SPORT S mode Improves acceleration response by controlling the transmission Suitable for when precise handling is desirable for example when driving on mountain roads When the driving mode select switch is turned right while a made other than SPORT S mode is selected the SPORT S indicator comes on in the instru ment cluster Also on vehicles equipped with a 12 3 inch display the driving mode is also automatically displayed on E the Side Display P 308 ace SPORT S f N45GSn0 SPORT S mode Improves steering performance and driving stability by simulta neously controlling the steering and suspension in addition to the transmission Suitable for sporty driving When the driving mode select switch is turned right while SPORT S mode is selected the SPORT S indicator comes on in the instrument cluster Also on vehicles equipped with a 12 3 inch display the driving mode is also automatically displayed on A F the Side Display gt P 308 7 SPORT S A I45GSM GS350_U OM30C34U 4
69. y the system applies the brakes A warning tone warns you when the system cannot decelerate sufficiently to prevent your vehicle from closing in on the vehicle ahead GS350_U OM30C34U 4 5 Using the driving support systems 219 3 Example of follow up cruising When following a vehicle driving slower than the set speed The system continues follow up cruising while adjusting for changes in the speed of the vehicle ahead in order to maintain the vehicle to vehicle distance set by the driver 4 Example of acceleration When there are no longer any vehicles ahead driving slower than the set speed The system accelerates until the set speed is reached The system then returns to constant speed cruising Approach warning faa When your vehicle is too close to a vehicle ahead and sufficient auto matic deceleration via the cruise control is not possible the display will flash and the buzzer will sound to alert the driver An example of this would be if another driver cuts in front of you while you are following a vehicle Apply the brakes to ensure an appropriate vehicle to vehicle dis tance m Warnings may not occur when In the following instances there is a possibility that the warnings will not occur When the speed of the vehicle ahead matches or exceeds your vehi cle speed When the vehicle ahead is traveling at an extremely slow speed Immediately after the cruise control speed was set At the instant the a
70. y obstacles when parallel park ing or maneuvering into a garage is measured by the sensors and com municated via the multi information display Remote Touch screen and a buzzer Always check the surrounding area when using this system E Types of sensors IN45GS029 C Front center sensors 2 Front corner sensors 3 Rear corner sensors 4 Rear center sensors If equipped GS350_U OM30C34U 4 5 Using the driving support systems 239 E Intuitive parking assist switch Turns the intuitive parking assist on off When on the indicator light comes on to inform the driver that the sys tem is operational GS350_U OM30C34U 240 4 5 Using the driving support systems Display When the sensors detect an obstacle a graphic is shown on the multi information display and Remote Touch screen depending on the position and distance to the obstacle m Multi information display C Front corner sensor detection 2 Front center sensor detection 3 Rear corner sensor detection 4 Rear center sensor detection 1145GS066 GS350_U OM30C34U 4 5 Using the driving support systems 241 E Remote Touch screen gt For 8 inch display When the rear view monitor E system is not displayed LEXUS Park Assist A graphic is automatically dis 4 played when an obstacle is detected The screen can be set so that the graphic is not displayed OP 246 2 W

Download Pdf Manuals

Related Search

Related Contents

Oregon Scientific RMR500A User's Manual  Chapter 20  ドライバー仕様書（機能説明）  Broan-NuTone L300L In-Line Exhaust Fan Kitchen Hood  Controladora de Aplicação  

Copyright © All rights reserved. Failed to retrieve file