USER GUIDE - Evo Canopy Inflatable Tents
Contents
1. VO canopy USER MANUAL Quick User Guide INFLATION 1 Unpack canopy roll out each 2 Locate center valve at the peak of the canopy 3 Locate valve s at the base of each leg leg Be aware of the surface Inflate center support through one way valve Insert and tighten valves remove upper conditions prep area if inflation cap only for one way inflation necessary 4 Inflate each leg After canopy is erect it is recommend to check each leg add air if necessary Secure each inflation cap so no air leaks 5 Attach accessories using the zipper connections For marquees first insert batons zip to canopy inflate arch connect peak support and inflate 6 Secure side panels using lateral straps if necessary to the legs or side panels Perform at base and half panel Secure your canopy with stakes sandbags weights lateral straps and guy wire The above described stabilization methods may or may not be adequate for your specific needs Quick User Guide DEFLATION 2 1 Remove lateral connections for side panel s Remove accessories by lowering l 3 Locate valve s at the base of each leg each zipper For marquees first deflate connection support and arch prior to l ar Unscrew the larger lower deflation cap 4 Locate the center peak valve and open for deflation 5 Carefully lay each leg over one another The canopy will lay outwards with three wings on one side and a single w2. ing on the opposite Fold them over in preparation for folding Slowly begin fold the canopy be aware not to place to much pressure on the canopy especially at the start It is recommended to lightly fold once removing the air and then repeating the process
Download Pdf Manuals
Related Search