MobileBlast User Manual
Contents
1. P ID O XAG seses eeek nessa n EESE EEKi paeas MA Y Device transportation sssssssssssssssssscoooososeeeeceee XA environmental CONdItIONS cecccccccccccccccccccccceces uA Device installation cccccscccccccccccccsccccecscccceesces Section Device start up and application Section V Safety Y General SAICLY sc zeccsocsscnsreasneasssuevendeseees sieveexssseaeseaen yi Y Y safety measures of device sssssssooossseeseseecceesssssee yi Section Maintenance A Clean up Y Periodical maintenance ccsccecsccecccceccccesccessceecss y A maintenance technical instructions ssssssssesseeeeeesococee y3 Section Maintenance How to use the manual This manual presents the instructions about use installation and maintenance of Mobile Blast made by Kousha Fan Pars Co It should be noted that The product should be used according to the instructions of this manual Thus all parts of it should be read carefully before starting and installing the tool Special attention should be paid to the highlighted parts refer to section Y Observing the instructions of manual assures the health and safe operation of the tool Manual is an integral part of the product Thus it should always come with the product and should be used optimally as a reference for use during the operation of product It should be available even during sale of the pr2. eye guard and face mask should be used Do not let anyone stand near the device because one can be harmed by suspended particles A periodic maintenance Inspection and periodic cleaning of the device depends on operation level It is suggested for user to inform the company experts about the workflow through consultation after installation and learn the appropriate time for inspection and periodic cleaning from them If user detects any damage or exhaustion during periodic inspections he she should contact the after sales department so that measures are taken for maintenance and compulsory service Periodic service should be determined by user and is performed by the after sales service department It is suggested that the maximum time interval for periodic repairs be months If user detects any defects or problems on the device he she should place a warning sign on the device to indicate that it is being maintained and it should not be used EC warning signs can be purchased at the associated stores Cleaning periodic maintenance and appropriate use of the device are important factors in lifetime and safety of it When any defect is seen in the device operation it is forbidden to use the device before solving that defect Safety and protective parts of the device should never be removed from the device unless for repair and maintenance purposes After using the device for a while nozzles should be che
3. abrasive material Changing the location of the device Constant device Connections inside the air pedal function are faulty Check fix the air pedal connections device Y Outlet valve in air pedal has a Replacing the air pedal with a new one sticking defect Air leakage Air outlet and inlet connections from air pedal have been connected inversely Switching the connections Air pedal doesn t work No air pressure enters the system from the compressor Y Pneumatic hose has been twisted Inspect compressed air lines Inspect compressor air pressure Y Hose accumulation Pneumatic pedal hose does not separate from the system The connection has not been freed because of the pressure behind the system Evacuation of the air inside the system Pressing the blue ring of the fast connection and bringing out the hose form the inside of fast connection Thanks for your selectivity Kousha Fan Pars Engineering and Manufacturing
4. t be held liable environmental circumstances It is important to choose an appropriate environment during installation and operation for personal safety correct operation and long lifetime This environment not only should be big enough but also should be on enough have proper ventilation and should be kept away from dust and direct sunlight It should be noted that device must be placed in a way so that the connections may be managed easily Workplace temperature C Maximum humidity V 7 The device should not be used in a place where there is danger of explosion or firing The light of place should be high enough so that all parts of device can be seen clearly The device should never be exposed directly to sunlight or humidity of rain etc The following should be done before use of device Mobile blast has been designed to be put on a stable and firm worktable in parallel with ground The stability of all parts of the worktable should be checked Y Plug the device into the outlet after input power and mains electricity are checked device working voltage is based on AC Y electricity The grid single phase electricity should match the power supply specifications of device device installation Get the device out of its box carefully To do so take out all the protective material Plastofoams around it take out the steam cleaner and put it on a flat and stan
5. KOUSHA FAN KFP rs D en t CI Engineering and Manufacturing Central Office Address Islamic republic of Iran shahrake e gharb Farahzadi Blvd next to Atieh Hospital Sepehr street No Telephone number 44 AAP 124 4 9A 1 A Special line Fax number 9A AA 44 604 E mail info kfp dental com service kfp dental com After sales service unit Factory Address Tehran Qom khalj e fars highway Y kilometers Shamsabad industrial town Phase Sarvestan Blvd Gol e sorkh 4 street Segment Y Telephone number 44 V e eo A Fax number 44 1 91 FF Yoo E mail factory kfp dental com Website www kfp dental com In the name of God Dear customer We thank you for your selectivity and trust in purchasing domestically produced products and we are pleased that after continuous efforts we have been able to manufacture the Mobile Blast device in Iran and put it at your disposal This product has been designed by our technical and engineering team of experienced and committed people in the fields of mechanical electronics and computer engineering and by utilizing updated technology and building upon on Y years of experience in manufacturing dental equipment this product has reached production of export index quality In designing the product three principles of accuracy reliability and safety performance and also being easy to use have been con
6. cked for any remained abrasive powder Washer O ring should also be checked If you find any defect in the hose or other inspected parts disconnect the connection between the mobile blast device and the compressor and vacate the air flowing in the system After troubleshooting based on manual initiate the device If the device have any defects except the mentioned cases inform Kousha Fan Pars about the matter and never entrust the device to miscellaneous people A Maintenance technical instructions Troubleshooting problem Air and abrasive powder do not exit Possible reasons Blockage of the beginning of nozzles Y Pneumatic pedal hose has been twisted Corrective actions Opening nozzle Tungsten separation and cleaning the air exit path Y After bringing out the nozzle from the hose push the air pedal to determine if there is output Only air exits without abrasive powder Outlet air nozzles have been blocked Y Outlet nozzle from the reservoir has been blocked Y Abrasive material has impurity or humidity Air has humidity Open the chamber door Block the end of a blue hose inside the chamber using tape of a piece of fabric Close the glass chamber door again Place your finger on the nozzle outlet point and press the air pedal several times Open the chamber door open the blocked hose Close the chamber door and initiate the device Replacing the
7. dard laboratory table such that the space within Y cm radius of device is empty Make sure that the surface and legs of the table are not made of metal There is a danger of electrocution if the surface or legs of table are made of metal and they are in contact with the ground Thus put your vacuum mixer on a wooden table or fiberglass Vacuum Mixer should not be exposed to sunlight directly An appropriate cord should be used to connect the device to its nearby power supply An electrical protector must be put on the way of socket by the user so overload or indirect currents don t have contact with the protective parts of device Section f Device application Put the device on a worktable refer to section Y Remove the air pedal from the box Look for any damages in the hose Y Connect the air pedal pnegmatic hose to respective connections and assure from complete connection and latching in the connections pneumatic hose head with red sign should be connected to red head hose Figure mom Connect the compressor air pneumatic hose to the head hose Figure A Avoid bending or twisting the pneumatic hose o Adjust the device air pressure in the authorized range operational pressure between Bar based on your intended application Figure Close the reservoir door V Pour the abrasive powder in the reservoir The minimum authorized limit to fill the reservoi
8. device despite having obvious flaws not observing the maintenance instructions installation by unauthorized persons any repair or replacement by unauthorized persons Commutation fees of company representatives to install or repair during guarantee period will be received from buyer at site The device can t be used before installation and insurance of correct operation of protective parts It is highly recommended that user has a general knowledge of this manual before using this device The cases which appear to be operation flaws in the device should be registered by user and they should be sent to the after sale service department Authorized representatives of Kousha Fan pars Co These persons are endorsed by company to work on the device under any operational circumstances They are also authorized to do any electrical and mechanical adjustment repair maintenance program and authorized parts replacement Section Y Device Introduction Main parts You will be able to remove the oxides on casts and different surfaces with the Mobile Blast device Mobile blast is produced in Y and G types Y type is able to use Y um and G type uses V um powders Important parts of the Mobile Blast include Reservoir Y Reservoir door Y Nozzle hose Manometer Nozzle Regulator V Pedal Section f Technical features Technical features and operation rules of device Kousha Fan Pa
9. n stop operating the device immediately unplug it and call the after sales service department of Kousha Fan Pars Co and inform them about that e Never dissemble the electrical or pneumatic parts e Never replace the power supply or parts which are directly related to the plug e Operation of this device for applications other than those mentioned is forbidden e Make sure the device is disconnected from the main sockets before cleaning Y Y Device safety measures Kousha Fan Pars Co makes use of high quality raw materials for advanced production processes to promote the safety level Quality control is performed in three stages of input middle control and final control through several control stations a procedure which minimizes error and defect chances To assure that the device works safely follow all the aforementioned steps When you are working on the device filling cleaning repairing and maintenance using protective glasses is necessary for eye protection Y Remaining any amount of abrasive material in the washers leads to faster washer leakage and corrosion After evacuating and cleaning close the washers and door properly Solvents and abrasive material can create very small cracks in power reservoir body risk of explosion To clean the reservoir and the door only use dry fabrics and avoid attaching tape Never rub a rough object in the reservoir or on the outside surface Check the reservoi
10. oduct or even when it is not used In case of losing or damaging the manual get a replacement one from the after sales service department of Kousha Fan Pars Co The following are explained in detail in this manual Installation and start up of the product Operation details of the product and its parts Maintenance program Primary safety and preventive details Y Terminology and signs Knowledge of signs meanings is of great importance A list of signs has been introduced in the following for initial recognition and reference to them if necessary Danger Indicates compulsory warnings Warning Indicates functional recommendations Forbidden S e Indicates forbidden activities Caution 4 Refers to user instructions of the tool Section Y General information 1 Company liabilities Kousha Fan Co is not liable for any problem involving the following Failure to follow the instructions of this manual incorrect use of product repair by an unauthorized person and part replacement without coordination with after sales service department failure due to power fluctuations Y Y Guarantee Guarantee of this product includes repairs supply and replacement If used appropriately Kousha Fan Co guarantee covers all main parts of the device for year Following cases are not covered by guarantee power fluctuations incorrect transportation of device inappropriate and frequent use of
11. r door periodically and in case of seeing a suspicious instance replace the suspected part Checking the proper placement of protective isinglass is necessary before work Improper closing of the door leads to an unsafe reservoir and the reservoir pressure may increase abruptly 1 Never use the device without the proper powder Selection of powder type should be based on the validation of authorities and Kousha Fan Pars Company V Do not place the spinning nozzle towards the eyes and skin Misuse may results in serious harm to the eyes and skin wounds Section A maintenance A cleaning Keep the device body clean using a dry cloth Wet the cloth with little water or a non greasy solution if needed only do this for body cleaning Users should make sure the device is kept clean and free of dust water and other unexpected solutions At the end of each operation and when the device is on OFF mode and stable cleaning should be done If the user decides that the internal parts need cleaning he she should contact the after sales service department e Reservoirs and doors should only be cleaned with dry fabric e Pond trap chamber should be periodically inspected and in case of water being in the chamber chamber evacuation should be done by pressing the button under the chamber Figure Never use combustible corrosive base or toxic solutions for cleaning the device When using compressed air in cleaning
12. r in order to achieve the desired device function is a third of hose inside the reservoir and the maximum is cm below the door line Figure Y A Close the reservoir door A Make sure that the reservoir is closed and firm before using A Do not connect the device to electricity until this step Please use safety measures Even if the pressure gage show the device pressure Mobile Blast reservoirs are involved only when the pressure is applied on the air pedal Always use clean dry abrasive powder with proper powder size certified by the Kousha Fan Pars Company Before closing the reservoir door cleaning the door reservoir and its accessories is obligatory Make sure that the reservoir is closed properly Your Mobile Blast device is now ready to use Section Y Safety Y general safety Users are required to read and always follow the listed suggestions and warnings here following these instructions will assure a long term flawless operation for product Make sure that all parts of the device are installed correctly before using the device You should never use the device if its accessories are defected otherwise the device operation will be affected and it will no longer be covered by guarantee Thus make sure all parts are flawless before operation Never use a defected device e The place should be clean and well lit and free of obstacles e If you see any flaws in the device operatio
13. rs Co products are manufactured based on the latest technologies and are of highest qualities The most recent design and manufacturing methodologies are employed to increase lifetime and quality of products Technical details Technical specifications of the Mobile Blast are given in Table Reservoir capacity Joos Height Yy cm Width Yy cm Depth iY cm Net weight Y a Kg Table The device technical specifications Accessories Part Number Glasses Pneumatic hose Pedal Table Y A list of product accessories Section 4 Transportation and installation In order to avoid accidents it is really important to follow the following instructions during installation and fixing of equipment All steps are explained in detail Unboxing Having received the device make sure that the main box is sealed and intact Otherwise inform the after sales service department of Kousha Fan Co or its authorized representatives How to move the device The device should be moved as follows In order to move the device carefully place it in the box Y Reservoir evacuation Y Disconnecting the pneumatic hose from the device The device should remain in vertical position during movement For more safety and prevention of any injury duo to neglecting the technical details refer to the section Y Failure to follow the aforementioned instructions results in device being damaged and Kousha Fan Pars Co won
14. sidered so in order to correctly and completely utilize product features we ask you to read the instruction manual carefully and if you have any questions or you need more information contact the after sales unit Instruction manual is a comprehensive reference for efficient and safe use of the product Following the instructions of this manual has a great role in reducing consumable costs avoiding risks and ultimately increasing product life Instruction manual should always be kept near the product and the user should periodically read it Please impart us with your constructive guidance so that we can benefit from your comments recommendations and gain knowledge about your needs With the hope of enticing your satisfaction Kousha Fan Pars Engineering and Manufacturing Contents Topic Page Section Introduction 1 1 How to use the mantial ccccccccccscccsccsscccsscsscsseee Y Terminology and Signs cccccsscceccccscccssscscsscesecs 1 Section Y General information Y Company s liabilities cccsccscscccccsscssscesccesees v Y Y Guarantees sorsra renne Seas T srs Sais M Section Y Device introduction Y 1 Main Parts escena te en EONS s 4 Section Technical features 2 1 Technical features ccccccccccccccccccccccccccccecccccces Ne Technical details cccccccccccccccccccccccccceccccccessces s Section Transportation and installation
Download Pdf Manuals
Related Search