Просмотреть
Contents
1. 90 1 Notes The conversation is private other terminal can hear it Hands mode is default mode While the audio channel is open the input audio can be adjusted See the corresponding chapter on Audio Adjustments If t2. There is also option to connect a timer to the doorbell if this is not being used activate deactivate so that the automatic opening function is activated and deactivated each day at certain times entrance is activated for a period greater than 30 seconds it determines that the automatic door function should be activated When this doorbell feature is deactivated this function will also be deactivated AB
3. 90 30 Manual Monitor Activation Auto Start With the monitor standby press and hold this the image appears less 2 seconds If there is more than one camera in the installation to view the second camera s image you must release the button and re press it until the second camera s image appears To activate the audio and speak to the visitor or open the door follow the steps above If communication is not established with the entry panel the monitor will automatically switch off after 30 seconds
4. User menu Doormatic function DISABLED User menu Doormatic function ENABLED by the installer the installer Doormatic selecting this option you can access submenu allows to enable disable the user activate disable selecting option pressing OK Upon pressing OK you exit the screen menu and see if the doormatic mode is activated with the greed led light If it is not activated the red led light remains lit indicating standby mode
5. Auto Start Camera Selection Button A With the monitor on standby press this button for 1 second to switch the monitor manually activate the audio press pas button With video hold this button down for 2 seconds to sequentially select between the main camera and the secondary camera if there is one Note If the channel is busy an error tone BEEP will sound and auto start will not activate nor will the call to the guard unit The auto start function is always used on the main panel except where a call is received on the secondary panel Once the conversation is over auto start will activate on the secondary panel for 30 seconds After this time it will ac tivate on the main panel 1
6. Simplex mode Hands free you can select the simplex mode by pressing the right arrow the left arrow disables the simplex mode F1 Function F1 F1 key and connection allow you to configure operating mode You can select between the Negative send mode output and SOS to MDS Guard unit input Initially configured by default as an output and sends a negative If the other option is selected in conjunction with MDS VDS decoder version V10 26 or above a panic alarm can be sent to the MDS guard unit Upon pressing F1 the corresponding command is sent by the bus The F1 connection also acts as an input so when connecting a keypad to this pressing it it also sends the pani
7. 2 30 NOTE If there is more than monitor system and is made to monitor rest of monitors will show led warning the channel is busy
8. 30 User Menu Doormatic function User Menu Doormatic function DISABLED by the installer ENABLED by the installer 10 YDS Conversation Mode Configuration Within conversation menu you can select the Simplex and Hands free mode The hands free mode is selected as default Simplex Mode press the audio activation button to talk MENU button and release to listen Simplex Hands free
9. A MENU amp 0 MENU While setting audio only audio is activated Upon accessing audio settings menu the output audio is disconneced and you can only listen to the input audio which is what we regulate while talking from the Entry Panel audio settings is completed pressing the MENU key MENU 14 YDS FERMAX Section Il User __ Congratulations on purchasing this quality product The iLoft Video Doo
10. 2 30 F1 F1 and F2 Buttons for Additional Functions Assigned by the installer see the corresponding chapters F1 u F2
11. 1 2040 2438 2448 2 OUTPUTS VIDEO DISTRIBUTOR 2 2 2 1 VM edes r 75 Ohm 75 OM Detail of connection of the video cables on the monitor connector BN DISTRIBUIDOR VIDEO 2 SALIDAS REF 2448 2 OUTPUTS VIDEO DISTRIBUTOR F2 F1 T A Ct VM F2 F1 T A Ct z L M M r Detail of connection of the COAXIAL at the monitor connector KO
12. selecting this option you can access submenu allows you to enable disable the induction loop 17 FERMAX Deactivated you can enable the induction loop by pressing the Activated right arrow left arrow disables the induction loop Automatic Opening Doormatic With Automatic Opening activated when is received from the entry panel the lock release is activated The open door function is disabled by default not available to the user must be pre enabled by the installer to be able to be activated by the user TO
13. A MENU NZ 0 MENU 13 YDS FERMAX And by pressing the MENU the menu disappears leaving the video with the established values MENU Audio Adjustments While audio channel is open input audio volume can adjusted with on screen menu Conversation mode Hands free you must press the MENU key for 5 Conversation mode Simplex simultaneously press the F1 F2 buttons for 1 s Hands free MENU 5 Simplex
14. 2 ol amm tr y 12 Use damp cloth 2 Wipe it over the monitor always following the same direction After cleaning the monitor dry it carefully to avoid moisture damage 1 2 Cnh 22 YDS TECHNICAL FEATURES Power Supply Consumption standby video audio video con bucle audio video c Operating Temperature 5 40 Humidity 5 95 OSD Menu Resolution H Hor 480 Line 3 5 77 480
15. NOTE The monitor screen goes once from panel has ended Opening Door When is received entry panel you can open door 2 at any by pressing the button 20 YDS FERMAX Answering a call When button the Entry panel is pressed tone is emitted both panel and the monitor causing the screen to start up Press the button to speak with the visitor The audio channel between the street and the home will be opened operating in hands free mode The communication will automatically end after 90 seconds or at any time by pressing button The led will remai
16. Programming Monitor from monitor itself Explained previous 9 YDS Automatic Opening Doormatic automatic open function is disabled default availble to the user and the installer must enable it if desired from the administrator menu accessing the specified option selecting this option you can access submenu allows you to enable disable mode
17. F1 F2 1 Conversation mode Hands free with the audio channel open MENU key 5 sec access audio settings menu When in the audio settings menu LOCK RELEASE key increase volume CAM key decrease volume Hands free 5 2 74 amp 0 MENU Conversation mode Simplex with the audio channel open Simultaneously press the F1 F2 keys 1 sec access audio settings menu When in the audio settings menu LOCK RELEASE key increase volume CAM key decrease volume Simplex F1 F2 1
18. Input audio volume adjustment Configuration of parameters for the screen menu OSD OSD Automatic door opening DOORMATIC Lift control Image adjustments brightness contrast and colour Induction loop 5 YDS FERMAX Connection Video terminals coaxial e Connection terminals V live 18 Vdc power supply M mesh L data bus Ct Camera Activation 11 Vdc F1 F2 additional functions See the chapter on programming T button connection for residential Door P1 y call extension connection ref 2040 light and bell activator ref 2438 etc Ct 11 18 L F1 F2
19. Hundreds Press button Once you reach 9 if you press it again it returns to 0 The next time you press it will start at 1 Tons pressi baion 9 0 Single unit Press button 1 4 Programming Press to confirm selected number You return to previous programming menu 4 B 8 YDS PROGRAMMING ADMINISTRATOR Menu Access the Administrator Menu 1 in the User menu Press Menu 1 second 1
20. MENU Short Press MENU key access menu When in the contrast menu LOCK RELEASE key increase contrast CAM key decrease contrast MENU A MENU 0 MENU When contrast single click the MENU takes it the colour level adjustment MENU AMRAN colour key decrease MENU
21. 21 YDS Quick guide LED lights FERMAX Not programmed Standby Call Called Hands audio Output audio modo simplex Input audio modo simplex Do not disturb Doormatic STATUS LED Very slow flashing 0 1 5 OFF 0 1 5 Slow flashing 1 0 5 OFF 1 5 MAINTENANCE CLEANING R Do use cleaning products which contain acids vinegar are abrasive in nature
22. the left 6 panic mode If configuring the Day Panic mode the Guard unit it automatically configures the Panic Call mode on the monitor s Upon deactivating the mode on the guard unit it also deactivates it on the monitors 11 YDS F2 function F2 F2 key and F2 connection allow you to configure operating mode Initially it is configured by default as an output for F2 when the F2 key is pressed However you can configure the Lift Control option giving an output to the F2 connection when sending the Lock Release either for the time the lock release button is being presse
23. x x 174 x 114 x 50 6 8 x 4 5 x 2 Note this monitor can be installed in a universal box Depth the Monitor depth stated here takes into account the Fermax box Remove electrostatic protective tag OT Remove electrostatic protective tag BOX B ENGLISH YDS MONITOR INSTALLATION SURFACE Monitor Dimensions Height x Width x Depth 197 x 131 x 34 3 mm 7 7 x 5 1 x 1 3 x x 197 x 131 x 34 3 7 7 x 5 1 1 3 model Monitor Dimensions Height Widt
24. If the monitor is not yet programmed press Menu for 1 second and directly access the ADMINISTRATOR Menu see the next page Menu e 1 ADMINISTRATOR Menu 7 YDS 2 When in the User menu enter in ADMINISTRATOR menu pressing F1 F2 simultaneously for 5 seconds Once in the ADMINISTRATOR menu select the first option 2 ADMINISTRATOR F1 F2 5 ADMINISTRATOR Select the first option Administrator Menu AIA Fi gt lt 1 gt icons viewed o
25. DISTRIBUIDOR VIDEO 2 SALIDAS REF 2448 2 OUTPUTS VIDEO DISTRIBUTOR F2FITACt L MV VM F2FITACt L MV 99 O r 2 Detail of connection the VIDEO cables the monitor connector 1 when there is another monitor connected 2 1 2 YDS PROGRAMMING THE MONITOR iLOFT The monitor will function until it has been programmed Option 1 From Panel Monitor 1 lt 2 min 30 sec 2 30 1 With the monitor connected press the programming
26. enable Deactivated mode by pressing the right arrow Activated left arrow disables the mode Notes If activated not the option is available not available the user menu There is also option to connect timer doorbell if this is being used so that the automatic opening function is activated and deactivated each day at certain times If that entrance is activated for a period of greater than 30 seconds it determines that the automatic door function should be activated When this doorbell feature is deactivated this function will also be deactivated
27. Access User Menu 1 enter the User menu press Menu 1 second 1 B Menu 1 Confirmation key Scroll keys in menus Programming menu exit key Cancel key Ringtone Selection Within the user menu the monitor allows you to select independent melody for the calls from the entry panel secondary entry panel doorbell First of all volume appears for selected call which may changed pressing the corresponding keys Then in each option the current melody value is shown so that if you want to listen to the current parameters p
28. 3 5 234 Video signal Composed signal 1 75 Q 7 Mhz 1 75 7 Flush mounted Dimensions 197 x 131 x 60 mm 7 7 x 5 1 x 2 3 Surface Dimensions 197 131 34 3 7 7 5 1 x 1 3 Ancho Prof 23
29. 30 18 MONIT OR FERMAX iLOFT Led WITH induction loop Buttons includes a loop that interacts with hearing devices for the hearing impaired Induction loop It is identified with this symbol Notice hearing devices with manual selection modes Digital Mode should configured a m Buttons
30. 16 Melody 16 2 a A a TEEL 16 16 1 NABHAA 16 2 S6 0ndary 17 2 17 17 17 Do no disturb Cancel Ringtones 17 17 E 17 17 Automatic Opening nanena 18 18 IES 19 M nT p 19 19 19 20 20 Maintenance cleaning 22 Nn O6
31. MENU MENU 19 FERMAX sZ Lock Release Call Guard Unit Button p Pressing this button whilst communicating with the Entry Panel will activate the release Pressing this button whilst the monitor is on standby will result in a call being made to the guard unit where one exists Note If the channel is busy an error tone BEEP will sound and auto start will not activate nor will the call to the guard unit m
32. B Menu 1 Confirmation key Scroll keys in the menus Menu exit key Cancel key 2 When in User menu enter ADMINISTRATOR menu pressing F1 F2 simultaneously for 5 seconds Once the ADMINISTRATOR menu select the first option 2 ADMINISTRATOR F1 F2 5 ADMINISTRATOR Administrator Menu Icons A MENU F1 0 F2 I I L From this menu you can access the different options and functions shown with the icons
33. 9 Programming Monitor monitor itself 9 9 Automatic Opening Doormatic 10 10 Conversation Mode Configuration 11 11 F1 auxiliary FUNGON 11 Benomoratenbhaa 11 F2 auxilliary Function 12 F2 12 Adjustments Audio 13 Hactpo kn Aygno 13 Video Brightness Contrast Colour gt 13 13 SAUdIO 14 14 Programming User E aE ei 16
34. FERMAX CONGRATULATIONS ON PURCHASING THIS QUALITY PRODUCT Fermax electronics develops and manufactures renown systems that meet the highest design and technology standards Your FERMAX video door entry system will allow you to communicate with the entry panel see who is calling you and open the front door if you wish We hope you enjoy its range of functions www fermax com electronics wWww fermax com VDS WITH OSD MENU Code 97676Elb V11_12 VDS KPAHHbIM 9
35. MENU Audio Activation Hang Up and Configuration Settings Button menu Upon receiving call have 30 to respond before it returns to standby mode During this time the red led light will turn off informing you that a call is pending press this button to talk to the visitor The audio channel is opened from street entrance to residence the blue led lights up indicating a conversation with the street entrance and everything said will be heard by it this is in hands free operating mode Press after finishing the communication when finished the blue led light again turns off and the red light is turned Note The default internal timer for the monitor is 90 seconds With the monitor on standby press and hold this button for 1 second to into User configuration mode See the Programming User Menu section 30
36. button PROG for 2 seconds to access this you must lift up the front cover A confirmation tone will sound 1 PROG 2 2 Press the call to residence button Again confirmation is made with different tone 2 The time between steps 1 and 2 must less than 2 and half minutes 1 u 2 2 5 Option 2 From the Monitor You can program monitor on screen menu 1 Enter in User menu Press Menu 1 second 1 Menu n e 1
37. 7676Elb V11_12 2 FERMAX MONITOR Aa e aiaiai 4 4 Installing the Monitor 4 MOHTaX 4 19 5 QYHKUMM 5 6 6 Programming the Monitor 7 7 Option 1 From Panel 7 1 c 7 Option 2 From the 7 BapnaHT 2 C MOHMTOPA 7 Programming Administrator 9 9 Access the Administrator 9 K MEHO
38. CNYXNBAHNE 22 23 23 Page 3 YDS INSTALLING THE MONITOR Installation with FERMAX Installation with UNIVERSAL FERMAX Monitor Dimensions Height x Width Depth 197 x 131 x 60 mm 7 7 x 5 1 x 2 3 x x 197 131 x 60 7 7 x 5 1 x 2 3 model Monitor Dimensions Width Depth 197 131 x 59 mm 7 7 x 5 1 x 2 3 197 131 x 59 7 7 x 5 1 x 2 3 Dimensions Height x Width x Depth 158 x 108 x 45 6 2 x 4 2 x 1 7 Fermax x x 158 108 x 45 6 2 x 4 2 1 7 Universal Dimensions Height Width x Depth 174 x 114 x 50 6 8 x 4 5 x 2
39. ble Induction loop 1 F2 Doormatic 12 YDS FERMAX ADJUSTMENTS Audio Video Video adjustments Brightness Contrast Colour monitor allows for the adjustm
40. c command to the MDS guard unit F1 SOS MDS MDS VDS 10 26 F1 1 MDS negative send mode mode you can select the panic mode pressing right arrow
41. d in call or conversation mode or while the doormatic automatically sends the lock release command lf you press the F2 button no action occurs F2 F2 F2 Lift 2 2 F2 output mode lift control mode you can select the lift control mode by F2 pressing the right arrow the left ar
42. d light for one second To deactivate it reselect the same option and the red led light remains lit showing Standby mode B activate deactivate Induction loop Within the same user menu you can select the induction loop default it is disabled The loop interacts with hearing devices for the hearing impaired
43. ents of brightness contrast and colour while having received when conversation has begun For this press the MENU button for 5 seconds and a menu appears to adjust the image s brightness MENU 5 MENU 5 access brightness menu When the brightness menu LOCK RELEASE key increase brightness CAM key decrease brightness MENU 5 A MENU A T m 0 CAM MENU Lock Release When in brightness single click the MENU takes it to the contrast level adjustment
44. g the screen to start up Press the jam button to talk to the visitor leaving the input audio channel activated The simplex mode is indicated by the flashing blue led light From this moment on each time you press the button MENY the output audio channel is activated constant blue led light and when releasing it it activates the input audio channel blue flashing led light the operation is in simplex mode The communication will automatically end after 90 seconds or at any time by pressing the ai button Once disconnected the blue led will turn off If communication is not established with the entry panel the monitor will automatically switch off after 30 seconds ENY
45. h x Depth 197 x 131 x 33 3 mm 7 7 x 5 1 x 1 3 Pure x 197 x 131 x 33 3 7 7 x 5 1 1 3 Remove electrostatic protective tag Available functions The available functions the VDS monitor are summarised in list below iLoft VDS opening of door iLoft VDS Call to guard volume regulation disconnection Do not disturb Ringtone selection 7 options 7 Doorbell Programming the terminal and the entry panel
46. he monitor is configured to simplex mode press to speak and release to listen it is indicated with a flashing blue led light activating the input audio channel From this moment on each time you press the MENU key the output audio channel is activated constant blue led light and when releasing it it activates the input audio channel blue flashing led light To end a conversation short press the MENU key u
47. lay it by pressing the button identified as PLAY on screen 1 1 YDS 2 Secondary Panel 2 3 Doorbell 3 monitor has two connections to connect external keypad so that when short occurs between identifying tone is generated Like previously stated the doorbell melody can be configured within the melodies menu T Do disturb cancel ringtones Within the same user menu you can select the Do Not Disturo mode this select the corresponding icon and upon pressing OK you exit the screen The Do Not Disturb mode is indicated with the blinking of a red le
48. n lit for the duration of the conversation If communication is not established with the entry panel the monitor will automatically turn off after 30 seconds MENY 90 MENY 30 While simplex conversation mode press the button to speak and release to listen When the call button on the Entry panel is pressed a call tone is emitted both from the panel and on the monitor causin
49. n screen are controlled the corresponding buttons on the monitor A MENU F1 0 F2 I The first thing the monitor then does is indicate the number of the current monitor the SCREEN If it is not it will show the following When the terminal has been programmed the led will flash very slowly 3 Programme the number Each time the button corresponding to hundreds tens or single units is pressed the figure goes up that figure and is shown on the DISPLAY 3
50. r Entry System monitor hands free and with a full colour screen that allows you to communicate with the entry panel see the caller and open the entrance door if you wish With the onscreen menu you have new features to configure the monitor s parameters and induction loop We hope you enjoy its range of functions www fermax com 15 YDS PROGRAMMING USER Menu
51. row disables the lift control mode Resetting Parameters You have option to reset the parameters to default values selecting option on the installation menu and confirming the operation This reset does not change the programmed terminal s number parameters changed are Selected melody for the main panel Ding Dong Dang Selected melody for the secondary panel Bitonal Fermax Selected melody for the doorbell Ding Dong Call tone volume medium Call volume Conversation volume Medium conversation volume Image adjustments brightness contrast and colour Start up adjustments Do not disturb deactivated F1 connection operations Panic OFF F2 connection operations Lift Control OFF Doormatic Disabled Disa
Download Pdf Manuals
Related Search