User Manual (PDF format)
Contents
1. color of the word and line highlight can be changed from red to yellow The red word highlight is the default English Page 16 Optelec ClearView Speech 2 8 Settings Select the Settings button to enter the Settings menu The Settings menu contains three buttons Voice Preview Restore defaults Settings 2 8 1 Voice The Voice button in the settings menu opens a list with all available reading voices and languages Selecting this button will open the voices list v de DE AC Andreas fr FR NU Thomas es ES AC Antonio WAit IT NU Paolo Voice x To enable a reading voice select it from the list by tapping on it A checkmark in front of the voice name will indicate if it is enabled When the voice is enabled it will be available under the Voice button in the main menu By deselecting a voice the voice will be removed from the available reading voices The selected reading voices are always displayed first in the list If you touch the screen and slowly move your finger over the voices the name of the reading voices will be read aloud To select a voice simply tap on it 2 8 2 Restore defaults If you wish to restore the default settings select this button You will be prompted if you are sure to restore the defaults To restore the defaults select Yes To cancel restoring the defaults select No English Page 17 Optelec ClearView Speech Default settings English Pa2. full page Overview with navigation bullets and magnify your document tap the blue button on the left hand side of the Button Bar right of the magnifying glass To decrease the magnification tap the blue button left of the magnifying glass The minimum magnification is the Overview with the navigation bullets To quickly switch between Overview and the last used magnification level tap the magnifying glass in the Button Bar Besides the zoom buttons there is another possibility to magnify documents Touch the screen by pointing on the text you wish to read and it will be magnified stepwise and automatically centralized Touch the screen as long as you would like to zoom in 1 8 Reading a document To start reading tap the Play button in the middle of the Button Bar To pause reading tap the button once again The ClearView Speech will mark your reading position in the document with a highlight To start reading at another position in the document tap on a blue bullet in page overview or magnify the text and tap on a word where you would like the ClearView Speech to continue reading 1 9 Scrolling the document To scroll up down left or right within the magnified document simply touch the screen with one finger and swipe up down left or right 1 10 Text color To enhance the contrast of the text a text foreground and background color can be selected This will not influence the representation of pictures Pictures are alw
3. tap on the green Open button Select the Document button to see the list of saved documents showing the most recently saved document first To open and view pictures select the Picture button Document Pictures Scroll the list of documents or pictures using the scroll bar on the right side of the screen If you touch the screen and slowly move your finger over the documents the title of the document will be read aloud To select a document simply tap on it open 1 JPG Clear Reader A new concept in reading save 4 JPG Clear Reader Ant w concept in reading Open gt In the list with documents or pictures tap the document or picture you wish to read or view The menu will be closed and the document or picture will be opened Pictures can be magnified It is possible to open photos from a USB stick 2 5 Delete To delete a document open the menu and tap on the Delete button to see the list of documents Select the document you wish to delete English Page 14 Optelec ClearView Speech open 2 JPG open 1 JPG um Clear Reader A new concept in reading save 4 JPG You will be prompted to confirm to delete the document To delete the document select Yes To cancel deleting the document select No Both choices will return you to the list of documents 2 6 Voice This menu item lets you select your reading voice and language To select another reading voice tap the V
4. with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help WARNING You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions English Page 21 Optelec ClearView Speech 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation English Page 22 Optelec ClearView Speech Appendix B Operating Storage amp transportation conditions Operating conditions Temperature 10 C to 35 C 50 F to 95 F Humidity lt 70 no condensation Altitudes up to 3000 m 9842 feet Pre
5. English Optelec ClearView Speech User Manual Gebruikershandleiding Manuel d utilisation Manuale Utente Manual del usuario Bedienungsanleitung Optelec ClearView Speech English Page 2 Optelec ClearView Speech Contents English 1 Getting to know your ClearView Speech uuu 2u20002a0000ann0nnannunnnnnnnnnnunnnnnnnnnnnnnnnnnenn 6 1 1 Switching the ClearView Speech on and off 6 1 2 Resetting the ClearView Speech nennen nenne nenne nnenne nennen 6 gt Adige 6 1 2 BULBI nelle 9 1 5 Reading VOC CS la ao 10 1 6 Overview and reading zones e 10 tA MAOHIVINO A OOCUMENE sel aa 11 1 8 Read ng 2 00C6UMENt er 11 1 9 OCON the document een une 11 1210 lt l OXU COOK ee Eures 11 2 The ClearView Speech Menu u2 2220000220000an00nnnnnunnnnnunnnnunnnnnunnnnnnnnnnnunnnnnnnnnnnnnnn 11 2 1 Activating and closing the menu nenne nenne nenne nenne nenne nenne nenne nennen 12 22 USINGIREMEeIi alia 12 3 Pie lr 13 OO ee ee 14 25 DEEG een nina 14 NO el ui 15 27 NW lea 16 2 7 1 CER 16 2 1 2 COS 16 2 7 3 FIGNIGRI erre nerina 16 2 8 Seganala 17 2 8 1 VOIO eerie teeter en eee oi pae O 17 2 8 2 BESIOFE AEIAUl seen ee een 17 Append A Salelv sunken En a 19 Appendix B Operating Storage amp transportation CONCITIONS cccceeseseeseeeeeeeeeneeeeeeneees 23 Appendix C Warranty CONGIIONS ne anses ERRE AIA IR 23 English Page 3 Optel
6. ays displayed in their original colors If no high contrast color is needed the text can be displayed in its original colors Please refer to the following chapter on how to configure the high contrast colors 2 The ClearView Speech Menu This chapter will familiarize you with the ClearView Speech Menu Save Open Delete saved documents tof Delete Settings x English Page 11 Optelec ClearView Speech Delete gs Change voice Change viewing Change settings 2 1 Activating and closing the menu To activate the menu tap on the grey Menu button The Menu button is the most left button on the Button Bar marked with the character M To close the menu tap the white button marked with the X at the bottom right corner of the menu Any changes made in the menu are automatically saved 2 2 Using the menu The ClearView Speech menu contains two rows of three large buttons To activate a button tap the button once Activating a button will either change a setting or open a submenu or list If a button is greyed out the option is not available English Page 12 Optelec ClearView Speech 2 3 Save To save a document open the menu and tap the blue Save button First you will be asked if you would like to save your document with a voice label If you wish to save a document without a voice label select No The document will be saved using the first line of the document as the nam
7. cated on the reading table function exactly the same as with a ClearView without the ClearView Speech module For the standard ClearView video magnifier functionality please refer to the ClearView manual To activate the Speech mode touch the screen once When Speech on is announced please place the document you wish to read inside the document outline and tap the screen to start reading Design 7 0 nd on The ClearView Speech will capture and process the document and will start reading within several seconds To read another text press and hold the X button place a new page inside the document outline and tap the screen To exit the Speech mode tap the white Exit button marked with an X at the right side of the button bar at the bottom right of the screen 1 6 Overview and reading zones The ClearView Speech always provides an overview of the full page when it starts reading the page for the first time In the overview blue numbered bullets mark the detected text zones in the document The navigation bullets can be used to quickly navigate through a text Tap a navigation bullet and the speech will start reading the selected text zone The number of the navigation bullets represent the most likely order of the text The speech reads the zone with navigation bullet number 1 followed by navigation bullet number 2 and so on English Page 10 Optelec ClearView Speech 1 7 Magnifying a document To leave the
8. e contact your local city centre household waste disposal service shop from where you purchased the equipment or manufacturer of the equipment English Page 5 1 Getting to know your ClearView Speech This chapter will familiarize you with the operation of the Optelec ClearView Speech 1 1 Switching the ClearView Speech on and off To switch on both the ClearView and ClearView Speech module press the ON OFF button located right above the magnification button on the reading table It takes about 10 seconds for the ClearView to initialize before it displays an image In addition the start up process for the ClearView Speech module will take approximately 40 seconds You will hear the start up sound to indicate that the ClearView Speech is ready to use To switch off the ClearView Speech press the ON OFF button located right above the magnification button on the reading table again The ClearView will switch off after which it will take approximately 40 seconds for the ClearView Speech module to power down 1 2 Resetting the ClearView Speech In case a reset of the ClearView Speech is needed press the black button located on the right side of the monitor above the SD card slot to power down the ClearView Speech This will take approximately 15 seconds Press this button again after 15 seconds to switch the ClearView Speech back on After about 40 seconds the ClearView Speech will play the start up sound to indicate it
9. e of the document If you would like to add a voice label select Yes You will hear a beep after which you have 5 seconds to record a voice label At the end of the recording you will hear another beep sound The document will be saved with the recorded voice label When the document is saved the ClearView Speech will ask if you would like to append more pages to the document If you select No the menu will be closed showing the document again If you select Yes you can start appending more pages to the document by placing the page in the document outline and tapping the screen once to capture the new page To stop appending more pages to the document press the close button marked with the X The ClearView Speech will prompt you with the question if the captured pages should be processed If No is selected the convertion to text will be done while reading the document If Yes is selected all pages will be processed before returning to the document reding mode This process may take several minutes depending on the number of pages of the document English Page 13 Optelec ClearView Speech By default adocument will be saved on the SD card delivered with the ClearView Speech If you wish to save your document on a USB drive connect a USB drive to the ClearView Speech When a USB drive is connected the document will be saved automatically on the drive 2 4 Open To open a document open the menu and
10. ec ClearView Speech User Manual Version 1 2 English Page 4 Optelec WEEE Notice ClearView Speech 2013 Optelec the Netherlands All rights reserved Optelec uf Optelec P O Box 399 2990 AJ Barendrecht The Netherlands Phone 31 0 88 678 34 44 E mail info optelec nl Internet www optelec com The directive on Waste Electrical and Electronic Equipment WEEE which entered into force as European law on February 13 2003 resulted in a major change in the treatment of electrical equipment at end of life The purpose of this Directive is as a first priority the prevention of WEEE and in addition to promote the reuse recycling and other forms of recovery of such wastes so as to reduce disposal a The WEEE logo shown at the left on the product or its box indicates that this product must not be disposed of or dumped with your other household waste You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will help conserve natural resources Moreover proper recycling of the electronic and electrical waste equipment will ensure the safety of human health and the environment For more information about electronic and electrical waste equipment disposal recovery and collection points pleas
11. ect current RoHS Compliance This product is in compliance with Directive 2011 65 EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment RoHS and its amendments European Union Notice Products with CE marking comply with the EMC Directive 2004 108 EC the MDD directive 2007 47 EC and the Low Voltage Directive 2006 95 EC issued by the Commission of the European Community Compliance with these directives implies conformity to the following international standards EMC FCC Safety EN 55022 FCC part 15 Class B UL 60950 1 EN 55024 EN 60601 1 1 EN 60601 1 2 English Page 19 Optelec ClearView Speech English Page 20 Optelec ClearView Speech WARNING The use of accessories transducers and cables with the exception of transducers and cables sold by the manufacturer of the ClearView Speech as replacement parts for components may result in increased emissions or decreased immunity of the ClearView Speech C FC This device bears the CE and FCC approval mark Federal Communications Commission FCC Statement This Equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance
12. f the University of Aberdeen only in connection with their use of the Optelec ClearView Speech video magnifier The original document is available at the Optelec website www optelec com English Page 24
13. ge 18 Optelec ClearView Speech Appendix A Safety Handle the ClearView Speech with care Rough handling will damage internal components Contact your Optelec distributor to service this equipment if necessary Do not open or remove any parts of the ClearView Speech as it will void the warranty Do not expose the ClearView Speech to excessive heat or direct sunlight to avoid the risk of fire Do not use the ClearView Speech near inadequately shielded medical devices To avoid risk of electrical damage keep your ClearView Speech away from fluids and chemicals Always disconnect the ClearView Speech before cleaning Use a soft cloth to clean the exterior Do not use cleaning agents or abrasive materials as they will damage the product Warning Do not modify this equipment without authorization of the manufacturer Warning To avoid risk of electric shock this equipment must only be connected to a grounded power outlet The ClearView Speech may only be used with the UL listed Optelec ClearView Caution Please be aware of the risk of explosion if the battery is replaced by an incorrect battery type Please dispose the old battery according to the instructions Use of the ClearView Speech other than described in this manual will exclude it from warranty conditions Caution consult ACCOMPANYING DOCUMENTS Follow the operating instructions or consult instructions for use STAND BY C Be Dir
14. is ready to use again 1 3 Getting started To get started with your ClearView Speech Step 1 Switch the ClearView Speech on with the lt red gt button Step 2 After 40 seconds the ClearView Speech will play a start up sound Now tap the screen once to activate speech English Page 6 Optelec ClearView Speech I TI Step 3 Place the document you want to read under the ClearView Speech inside the document outline which is shown on the monitor Headlines Step 4 Tap the screen to activate the document capture process and to start the speech This can take approximately 15 to 20 seconds Step 5 The speech will start reading the document and the document zones will be marked on the screen with large blue numbered bullets Tap a bullet to start reading the specific text zone English Page 7 Optelec ClearView Speech Step 6 Press the pause button to pause the speech Step 7 Select another zone by tapping once on another blue bullet Photos are displayed in the original colors To view photos magnified tap it once To return to the full page view tap the photo once again Step 8 Tap the button marked with the X on the right end of the button bar to return to ClearView mode Tap and hold the button marked with the X on the right end of the button bar to capture a new page English Page 8 Optelec ClearView Speech 1 4 The Butt
15. oice button Delete Settings The ClearView Speech will switch to the next configured voice If by adjusting the reading voice results in a change of language the menus will automatically change to the same language To add or delete voices and languages from the voice selection please refer to paragraph 4 8 2 English Page 15 Optelec ClearView Speech 2 7 View By selecting the View button the View menu will be opened The View menu contains three buttons Color Contrast Highlight Viewiexampleltext Contrast Highlight View x 2 7 1 Color This option is only available when the Contrast submenu is enabled Tap the Color button to cycle through the available high contrast text foreground and background color combinations The colors that can be selected are e Black White e Black Green White Black Green Black Yellow Black Black Purple Black Yellow Purple Black Yellow Blue Blue White Blue Yellow White Blue Black Red Black Amber e Red Black e Amber Black 2 7 2 Contrast Tap the Contrast button to enable or disable high contrast text colors Pictures will always be displayed in their original colors Only the text foreground and background colors will be changed The default contrast settings are black text on a white background 2 7 3 Highlight This option lets you choose a word highlight line highlight or no highlight Both the
16. on Bar The following figure shows the ClearView Speech button bar Use the button bar to start and pauze the speech adjust the magnification adjust the volume adjust the reading speed activate the menu and to exit Speech mode and return to ClearView mode Play Volume Volume Menu pauze down up Close Zoom out Zoom in Go to full Speed down Speed up page overview Play Pause button Orange button in the centre of the button bar to start and pauze the speech Magnification The blue button will decrease the magnification The blue button will increase the magnification Tapping the magnifier will switch between Overview and the last used magnification level am Volume The purple button will decrease the volume of the speech The purple button will increase the volume of the speech _V Reading speed The green button will decrease the reading speed The green button will increase the reading speed ClearView mode Tap the white button with the X to switch back to the ClearView Tap and hold the white button with the X to take a new picture Menu button Grey button marked with the character M on the left side of the button bar to enter the menu English Page 9 Optelec ClearView Speech 1 5 Reading modes The ClearView Speech has two modes ClearView and Speech mode When in ClearView mode the ClearView operation is not changed All ClearView buttons lo
17. ssure 700 1060 hPa Storage amp transportation conditions Temperature 10 C to 40 C 50 F to 104 F Humidity lt 95 no condensation Altitudes up to 12192 m 40000 feet Pressure 186 1060 hPa Appendix C Warranty Conditions Optelec warrants the ClearView Speech effective from the date of delivery to be free of any defects in material and workmanship The warranty is not transferable and does not apply to groups multi users and agencies The ClearView Speech was designed for the individual purchaser to be used at home or on the go Optelec reserves the right to repair or replace any purchased ClearView Speech with a similar or improved product In no event shall Optelec or its suppliers be held liable for any indirect or consequential damages The original user s remedies are limited to replacement of the ClearView Speech This warranty is valid only when serviced in the country of original purchase and with intact seals For additional warranty claims or service during or after the warranty period please contact your Optelec distributor English Page 23 Optelec ClearView Speech Optelec is not responsible for any uses of this device other than those described in this manual Use of the ClearView Speech other than described in this manual will exclude it from warranty conditions This document has been abridged from the original user manual provided by Optelec and is for use by students and staff o
Download Pdf Manuals
Related Search