X1TXO 2.4GHz DSSS Module User Manual. Horizon Hobby Inc., 1173
Contents
1. the equipment 5 5 This module meets the requirements for a mobile device that may be used at separation distances of more than 20cm from the human body It may be used in hand held controllers that provide a separation distance of at least 5cm between the antenna and the body excluding hands wrists The instructions to the user for the host device must include information requiring the product be used in a manner to ensure the appropriate separation 20cm or 5cm between antenna and body and requiring that the transmitter not be collocated with another transmitting device2. X1TXO 2 4GHz DSSS Module User Manual Horizon Hobby Inc 1173 Cygnet Trail Bigfork MT 59911 408 203 4408 1 Features e 2 4GHz Direct Sequence Spread Spectrum DSSS radio transceiver module e Operates in the unlicensed worldwide ISM band 2 4 GHz to 2 483 5GHz band Fully integrated power regulation with a wide input unregulated operating range 2 4 to 3 6V Fully integrated local oscillator and 12MHz 20ppm reference crystal 200mA operating current Transmit power 200mW EIRP Receive sensitivity up to 95dBm DSSS data rates up to 250kbps 1 mile operating range Full packet assembling and disassembling Auto transaction sequencer Fully buffered digital interface with high voltage tolerant inputs 2 Pin description Pin Number Name Description 1 GND Module Ground 2 VCE Power control monitoring 3 VIN Module DC Power 4 P21 Baseband CPU digital port P2 1 5 P33 Baseband CPU digital port P3 3 6 P17 Baseband CPU digital port P1 7 7 P32 Baseband CPU digital port P3 2 8 GND Master in slave out data 9 P30 Baseband CPU digital port P3 0 10 XRES Baseband CPU reset input 11 P11 Baseband CPU digital port P1 1 12 P10 Baseband CPU digital port P1 0 H oo B B Y 3 Specifications Parameter Value Units Storage Temp 65 to 105 Degrees Celsius VDD 2 4 to 3 6 Volts Receive Sensitivity 95 dBm Transmit power conducted 18 dBm MAX Transmit power rad
3. iated 20 dBm MAX Idle current 1 mA Receive current 22 mA Transmit current 50 mA 5 Module User Requirements 5 1 This module must be integrated into a device where the user cannot access the antenna connector 5 2 Only a 2dBi antenna can be used with this module The antenna must meet and not exceed the gain and pattern of the supplied Inpaq DAMOOBM1 1500209 folded dipole antenna 5 3 The device must contain the following permanent labeling on the exterior of the device as follows Contains FCC ID BRWDAMTX11 5 4 The user manual of the device must contain the following paragraph FCC Information This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation CE Information This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2 400 GHz to 2 4835 GHz frequency range The following countries associated regulatory agencies recognizing the noted certifications for this product as authorized for sale and use are Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate
Download Pdf Manuals
Related Search