User Manual - Novo Supply
Contents
1. 3 Fire water damage theft war riot hostility acts of God 2 a Examples contained in this list are not fto be construed as all inclusive Winco Design appearance parts amp construction are subject to change without notice 006325 Rev I Date 06 27 13 JWC2. of retail sale proof of purchase required Limited One Year Product Warranty Winco Mfg LLC warrants the complete product for one 1 year At Winco Mfg LLC sole discretion it may repair or replace any components freight free that are found to be defective during the first year Winco Mig LLC shall not be liable for any labor or any other costs incurred as a result of or in conjunction with a warranty claim Limited Three Year Warranty Winco Mfg LLC warrants recliner mechanisms electrical components vinyl panels and Vinyl on upholstered parts from cracking or delaminating pressurized gas springs and casters when new for a period of three 3 years At Winco Mfg LLC s Sole discretion it may repair or replace components found to be defective Winco Mfg LLC shall not be liable fi any labor shipping or any other costs incurred as a result of or in conjunction with a warranty claim Limited Lifetime Frame Warranty Winco Mfg LLC warrants steel and aluminum base frames for all products when new for the lifetime of the original purchaser This limited warranty does not apply to paint finish or any components attached to the frame such as upholstery foam casters mechanisms or related parts that are covered under above warranties Winco Mfg LLC shall not he liable for any labor shipping or any other costs incurred as a result of or in conjunction with a warranty claim The purchaser s exclusive remedy under this warranty
3. or trailer Lock casters at all times except when transporting chair Chair must ALWAYS be positioned on a level surface Immediately remove from service Any recliner with broken recline mechanisms torn upholstery or other mechanical or visible damage USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS NEVER EXCEED the recommended weight capacity of 350 Ibs 159 kg SAVE THESE INSTRUCTIONS for future reference and training 557X 558X Weight Capacity 350 Ibs 159 kg 567X Weight Capacity 450lbs 204 kg ALWAYS REFER TO THE WEIGHT CAPACITY LABEL ON YOUR CHAIR In all cases the labeling on the chair at the time of delivery is the correct rating for your chair and that weight rating should not be exceeded NO TOOLS REQUIRED FOR ASSEMBLY PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY Install the Back 1 After checking your product for any shipping damage chair needs to be positioned upright on level surface Remove all packing material and hardware that was secured for shipping Remove tape and plastic If using scissors or knife please be careful not to damage upholstery 006325 Rev I Date 06 27 13 JWC 4 Page 2 of 11 Make sure footrest is in closed position amp LOCK ALL CASTERS before installing chair back Remove the 2 Bow Tie Cotter Pins and the 2 Clevis Pins from the lower Back Frame Forks DO NOT LOSE THESE PARTS YOU WILL NEED THEM AGAIN Using a second pe
4. 5 Rev Date 06 27 13 Page 8 of 11 JWC Page 9 of 11 Products with the following markings are intended for commercial use only 100 240 VAC 44W 50 60Hz WARNING Long term continuous exposure to heat may cause burns Read instructions before using DO NOT use wet DO NOT insert pins into upholstery Visit our website www wincomfg com product documents parts lists for a complete parts list catalog of your chair or call Customer Service 1 800 237 3377 to request it by mail 006325 Rev Date 06 27 13 JWC Page 10 of 11 Other Quality Winco Medical Furnishings You May Be Interested In D Clinical Convalescent LTC Recliners Recliners Exam Tables P _ kng Pa AK pu tg Privacy Screens 237 Stools Specialty Chair Transfer Chairs Room Chairs Visit us online at www wincomfg com 006325 Rev Date 06 27 13 JWC Page 11 of 11 e 5516 SW 1 Lane Ocala Fl 34474 A ig as Winco Phone 352 854 2929 e 800 237 3377 Fax 352 854 9544 e www wincomfe com LIMITED WARRANTY customerservice wincomfe com TERMS Winco Mfg LLC warrants this product to be free of manufacturer s defects in material and workmanship provided that the product is used according to normal operating conditions and proper maintenance intended by manufacturer This warranty is available only to the original retail purchaser is non transferable and commences on the date
5. Page 1 of 11 55 X 558X Comfort Care amp Cozy Comfort Premier Recliner 56 X 5680 XL Cozy Comfort amp XL Cozy Comfort Swing Arm Premier Recliner CUSTOMER INSTRUCTIONS PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT If you have trouble understanding these instructions contact your dealer or Winco customer support 800 237 3377 before attempting to use this product otherwise injury may occur Winco assumes no responsibility for damage or injury caused by the improper assembly installation or use of these products or during assembly or maintenance of these products READ AND FOLLOW ALL DIRECTIONS DO NOT put hands feet or clothing into any openings when changing positions on recliner Attendant MUST confirm that users hands and feet are safe while changing recliner positions or INJURY MAY RESULT Stay clear of the recline mechanisms Periodically recheck tightness of all nuts bolts and screws NEVER use the side tables or chair arms or backrest or legrest as a seat SERIOUS INJURY MAY OCCUR Chair MUST be in full upright position with casters locked when a patient enters or exits chair 5570OCCUR ONLY NEVER allow a patient to exit a reclined chair with position lock engaged or SERIOUS INJURY MAY 8 9 1O DO NOT use recliner for Transporting in or with ANY type of vehicle or trailer Winco recliners have not been tested or approved for use by an occupant in any type of vehicle
6. contact Winco customer service 1 800 237 3377 006325 Rev Date 06 27 13 JWC CORD STORAGE Models with Heat HT or Heat amp Massage HM 1 Before transporting chair or when heat amp massage is not in use power cord should be coiled and stored in the Hook amp Loop fastener provided as shown to damage to recliner etc 006325 prevent tripping on cord damage to cord Rear View of Chair NOTE Keep cord CLEAR of any movin Page 6 of 11 arts Rev Date 06 27 13 JWC Page 7 of 11 FOR PRODUCTS WITH POWERED OPTIONS Heat Massage etc Read all instructions before using this product IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS To reduce the risk of electric shock when using an electrical appliance basic precautions should always be followed including the following DANGER Always unplug this product from the electrical outlet before cleaning maintenance or when putting on or taking off parts WARNING 1 Unplug this product from the electrical outlet if this product is not to be used for extended periods of time 2 Supervision should be provided when this product is used by on or near children invalids or disabled persons 3 Use this product only for its intended use as described in this manual Do not use attachments not recommended by the manufacturer 4 Never operate this product if it has a damaged cord or plug if it is not working properly if it has been dropped or
7. d bolts Wrinkles in Vinyl Storage and shipping can cause wrinkles of the vinyl on your Winco chair This is normal Please allow 1 2 weeks at room temperature approx 70 degrees to allow for vinyl to expand back to original appearance Periodically recheck tightness of all screws and bolts and never use the chair arms backrest legrest or tray as a Seat Swing arm Operation For Model 5680 only 1 To open push the red latch handle to unlock the swing arm FIG 3A 2 To close push swing arm toward latch until latch engages FIG 3 Operating Instructions for Table OPTIONS available for your recliner 006325 Rev Date 06 27 13 JWC Page 4 of 11 Side Table LT RT DT To position side tables 1 To raise table grasp center of table and gently raise into place Table will automatically lock into place when released FIG 4 2 To lower table grasp table at the center raise and pivot down in one movement _ Pivot Table NP PN k Lap Position 1 To place pivot table in lap position pivot the table away from chair and pull over lap FIG 5 2 Tighten star knob to secure the pivot table in the lap position Exit Position 1 With the table in the lap position loosen star knob amp push table away to exit chair Remove Pivot Table 1 Loosen pivot table star knob 2 Pull up on pivot table until the table stem comes out of the black bracket Other availabl
8. d by user or attendant 5570 Only The position lock bar can only be engaged or disengaged by attendant Not all notches on Position Lock Bar are used for this model chair POSITION LOCK 5570 only Attendant may hold the chair in a reclined position by engaging the Position Lock To safely accomplish this recline the chair to the 2 or 3 recline position and lower the position lock with your hand until the notches on the Position Lock bars engage with the Position Lock Pins To release Position Lock raise the Position Lock off of the Pins and return chair to upright position Rev Date 06 27 13 JWC Page 3 of 11 WARNING to exit chair with Position Lock engaged SERIOUS INJURY MAY RESULT WARNING Failure to release the Position Lock before changing positions will result in damage to Attendant must release Position Lock before patient can exit chair If patient attempts the chair and void the warranty 4 This chair is equipped with 4 Twin wheel locking casters Twin wheel locking casters 3 BLACK casters only will lock wheel but will NOT prevent wheel from swiveling To lock push down on the wheel tab NOTE All 3 BLACK casters are wheel locking ONLY They DO NOT have a TOTAL and DIRECTIONAL lock feature To ensure proper operation of the reclining mechanism lubricate all pivot points with a silicone type lubricant or lubricant approved by your facility at least twice yearly Periodically recheck tightness of all screws an
9. damaged or dropped into water Return the product to an authorized Winco service center DO NOT carry or pull this product by power supply cord or use the cord as a handle Keep the cord away from heated surfaces Do not use outdoors To disconnect turn all controls to the off position then remove plug from outlet Do not yank cord Clean switch with a damp cloth only Warranty will be VOID if liquid is introduced into switch mechanism 0 Use only a certified extension cord that is rated at 15 amperes extension cords rated for less amperage may over heat Care should be taken to arrange the cord so that the cord cannot be pulled or tripped over 11 DO NOT run recliner or other equipment over cord 12 Recliner comes with a grounded three blade plug if the plug does not fit into the outlet contact a certified electrician to install the proper outlet DO NOT MODIFY THE PLUG IN ANY WAY OMNOO DANGER I Never insert pins or attach other metallic fasteners into onto the upholstery of this chair li Do not use this product if the covering shows signs of deterioration such as checking blistering or cracking ili KEEP DRY Do not operate in a wet condition or environment WARNING i Long term continuous exposure to heat may cause burns It is recommended that skin in contact with heated area be checked for redness and blistering during long term usage Do not use on an infant invalid or unconscious person Do not use on insensit
10. e Options l IV Pole Contoured Headrest Torso Support Side Cushion IV CHOO TS00 SC00 Operating Instructions for HM or HT Option HEAT amp MASSAGE OPTIONS Models with Heat HT or Heat amp Massage HM Control is located on the inside of right arm of chair 006325 Rev Date 06 27 13 JWC Page 5 of 11 HEAT HEAT ONLY MASSAGE Heating Push HEAT button See indicator light on switch 3 Lights High Heat 2 Lights Medium Heat 1 Lights Low Heat No Light HEAT OFF Allow 5 8 minutes for back and seat to warm to desired TEMP setting Heat will automatically shut off after approximately 60 minutes Timer resets when switch is pressed Massage optional Push MASSAGE button 1X Lower Back Low Intensity 2X Lower Back High Intensity 3X Upper amp Lower Back Low Intensity 4X Upper amp Lower Back High Intensity 5X Alternating Upper amp Lower Back High Intensity 6X MASSAGE OFF Massage will automatically shut off after approximately 15 minutes Timer resets when switch is pressed e Use a DAMP CLOTH ONLY to clean switch wiring or power pack located under seat frame e If there is no heat or massage or flashing light on switch check power cord connections to wall outlet AND connection of power cord to power pack unit under chair e If switch displays a flashing light Check all accessible wire connectors under chair for possible loose connections then
11. ive skin or on a person with poor blood circulation If you are uncertain if you should use this product please consult your physician about the use of heat and massage ii Do Not Crush Pinch heating elements or wiring WARNING Connect this product to a properly grounded outlet only GROUNDING INSTRUCTIONS This product must be grounded If it should malfunction or breakdown grounding provides a path of least resistance for electric current to reduce the risk of electric shock This product is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances DANGER Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded Do not modify the plug provided with the product if it will not fit the outlet have a proper outlet installed by a qualified electrician This product is for use on a nominal 120 volt circuit and has a grounding plug Make sure that the product is connected to an outlet having the same configuration as the plug No adapter should be used with this product 006325 Rev Date 06 27 13 JWC For an added level of safety Winco recommends the use of a 120 volt GFCI ground fault circuit interrupter outlet 00632
12. rson to help Position the Back Frame Forks over the Seat Frame and align holes HINT f you do not have a helper Rest the bottom of the Upholstered Back on the rear portion of the Upholstered Seat and nush the Back Assembly slightly forward to help steady the chair back Rail holes will cause back to operate poorly and may cause i WARNING e Failure to correctly install clevis pins connecting Back Frame fork holes and Seat Frame Use 1 one of the Clevis Pins and insert it FROM the inside of Back Frame Fork THROUGH hole in Seat Frame and THROUGH outside of Back Frame Fork REPEAT FOR OPPOSITE SIDE OF CHAIR FIG 2 Insert 2 Bow Tie Cotter Pins into the small holes on ends of the 2 Clevis Pins you just installed FIG 1 Remove the Bow Tie Cotter Pin and the Clevis Pin from the Back Support Strut attached to back frame Align the holes of the Back Support Strut with the holes in the Angle Brackets and insert the Clevis Pin into these aligned holes and secure with the Bow Tie Cotter Pin Back Frame Back Support Forks Strut Seat Frame Proper insertion 6 gt of Bow Tie Angled Bow Tie Cotter Pin Poe Pin Bracket eo Clevis Pin Operation of the Chair 1 006325 NON RESTRAINT 5570 only To make the chair permanently non restraint unbolt the Position Lock Bar from the back of the chair The 5570 5580 amp 5670 recliners have three 3 positions UPRIGHT SEMI RECLINE and RECLINE which can be achieve
13. shall be limited to such repair or replacement of defective components at Winco Mfg LLC sole discretion For warranty service contact the dealer that the product was originally purchased from or Winco Mfg LLC directly EXCLUSIONS There are no other warranties conditions representations or guarantees express or implied made or intended by Winco Mfg LLC and all other warranties conditions representations or guarantees including any warranties conditions representations or guarantees under any Sale of Good Act or Like legislation or statute is hereby expressly excluded Any and all other implied warranties shall not extend beyond the duration of the express warranty Liability for incidental or consequential damages is excluded to the extent permitted by law Some states do not allow the exclusion or limitation so the above limitation or exclusion may not apply to you This warranty gives you specific legal rights In addition you may also have other rights which vary from state to state GENERAL PROVISIONS No warranty herein contained or set out shall apply when damage or repair is caused by any of the following Damage in transit 2 Accident alteration abuse or misuse of product i e exceeding weight capacities applying inordinate pressure to footrest leg rest use in Mental Health facilities like institutions or any unintended use of the product or use in unintended environments i e outdoor showers MRI rooms etc
Download Pdf Manuals
Related Search