Home

Owner`s Manual TC-60PS34 - Support

1. yo NY ok to Single screen Panasonic TV g NY Ook to Single screen E Press to exit from a menu screen EXIT Navigation area E Press to go back El TB 9 to the previous rs RETURN EN 9 Preset position screen it RETURN 0 Home position A number of VIERA compatible network cameras can be found at the following sites http www panasonic com http panasonic net pcc products netwkcam For more details on setting and operation of the Network camera please also read the operating manual for the Network camera SODIAIOS YIOMION luis amp gt Q lt D 3 O D Q 39 40 Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions ANT Cable setup and operation Display the menu Select Setup Menu Setup Channel surf mode All Ye 2 next gt Language Clock ANT Cable setup Input labels gt select Anti image retention Network settings VIERA Link settings Setup Channel surf mode All g IO next K Language Clock ANT Cable setup Input labels e gt select Anti image retention Network settings VIERA Link settings E Press to exit from a menu screen EXIT Auto program Set automatically Automatically searches and adds available channels to the memory Select ANT in Select a scanning mode p 14 gt Select Cable
2. For the suitable SD Memory Cards please confirm the latest information on the following website http panasonic jp support global cs This site is in English only Cautions when handling SD Cards amp Use an SD Card which meets SD standards If not it may cause the TV to malfunction amp Do not remove the card while the unit is accessing data this can damage card or unit amp Do not touch the terminals on the back of the card amp Do not subject the card to high pressure or impact amp Insert the card in the correct direction otherwise card or unit may be damaged Electrical interference static electricity or erroneous operation may damage the data or card amp Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the unit Panasonic is not liable for any deterioration or damage of recorded data 32 mm 24 mm SD Card USB flash memory warning messages GT D No media Please insert an SD memory card or USB D gt oe No media Device removed gt gt amp The device is removed No photos No movies No music files to play No playable media D amp The device has no data or this type of data is not supported The file is broken or unreadable Cannebie agile amp The TV does not support the format Recommended USB device connections A B each USB terminal Wee DER Connections Recommended len Keyboard A Flash memor OO
3. Safety Precautions RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING To reduce the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service personnel WARNING The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Do not place liquid containers flower vase cups cosmetics etc above the set including on shelves above etc Important Safety Instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or
4. 25 26 Videos view Videos thumbnail Features Play gt Drive select gt am Y amp Media select gt GD FORMAT amp Aspect change ER Movie banner Drive type SD USB 121 13532 ET e se Date and time or Elapsed time of current movie File name INFO ge area amp To display hide Guide and Banner amp Subtitles are not supported in MKV file fra Forward SL Play Pause e Forward Reverse Stop Five level of 1 to 5 x2 x5 x30 Reverse x70 x100 are available Video options Displayed menu will differ depending on contents E Repeat playback Select Video options in Setup SUB MENU Set play repeat function On Off se EEE g Video options gt r g ox select D ET Compatible Data format for Media player SD card USB flash memory Media Compatible format e JPEG files DCF and EXIF standards Sub sampling 4 4 4 4 2 2 and 4 2 0 Image resolution 8 x 8 to 30 712 x 17 272 pixels e SD Video Files SD Video Standard Ver 1 3 Modified data with a PC may not be displayed correctly e AVCHD Standard compatible files Modified data with a PC may not be displayed correctly e MP4 files Video codec H 264 Audio codec MP3 AC 3 LPCM e MKV files Video codec H 264 Audio codec MP3 AC 3 LPCM e MP3 files MPEG Audio Layer 3 e AAC files MPEG2 AAC MPEG4 AAC For more data format information p 50 Music view
5. 6 Video PC example v Input label shortcut press the corresponding NUMBER button on the remote control to select the input of your choice Or press the INPUT button repeatedly to cycle through the available inputs set unused input to Not used below for quick skipping Select the input of your choice then press OK Setup ANT Cable p 40 gr Edit Device labels gt Input labels p 47 amp During the selection if no action is taken for several seconds the Input select menu disappears amp The terminal and label names of the connected equipment are displayed The input label will be displayed on the Input select screen if the Input label was customized amp For side input terminals HDMI 3 GAME Input label is set as default Operate the connected equipment directly or using the remote control supplied with the equipment For details see the manual for the connected equipment PC adjustments p 44 C D 5 Q m TI gt Q O 7 U Q O 5 Q O O gt mea D p oi O 3 D lt F D x D Q D lt O D ep 21 Using Media player You can view still and motion images and play music saved on a USB flash memory and an SD card Basic features for Media player E Available contents and features Media select Option menu Setup SUB MENU Slideshow settings Thumbn
6. Language Clock ANT Cable setup Input labels Anti image retention VIERA Link settings Menu Network settings E Press to exit from EXIT Wireless network IP address DNS settings Network cameras list m Press to go back to SONNETSURHAIE Mac address 00 0b 97 7c 65 e9 the previous screen RETURN Connection test Check that the Network settings are as shown below and then start Connection test Select Connection test and press OK It takes a while to cancel the test Q Displayed Connection test screen Connection test Check for address duplication O Check connection to the Internet O Check communication with EASY IPTV server Test in progress Network connection Select Network type Ethernet cable Wireless WiFi Network settings Select the settings and set a menu screen Network connection Wireless WiFi y gt T Q adj ust QD 55 e 22 Select Network settings Setup r elect Channel surf mode E RETURN J gt select SODIAIOS YIOMION uIsn amp Complete Connection test Success gt Completion screen is displayed Error gt Follow the directions on screen to complete the setting If you perform the Proxy settings check the Proxy address and the Proxy port number gt Q lt D 3 O D Q Wireless network Confirm Current settings and status This setting is performed only when Wireless WiFi is selected in Network connection
7. M0311 1061
8. Features Play folder Drive select Music nal amp Media select Navigation area gt Os RETURN 00 00 05 00 00 49 FI Artist name Elapsed time of current song FE Album name Song name Music options D Select Music options in Setup SUB MENU MENU Setup SUB MENU ae Music options Music options AD select Audio VIERA Link S dB R sd B gt E Y gt Forward Play Pause e Forward Reverse Stop Five level of 1 to 5 x2 x5 x30 Reverse x70 x100 are available INFO amp To display hide Guide and Banner E Repeat playback Set repeat function Off Repeat Folder One song Music o a Repeat playback RE Ok 6 select m Adjust the Picture and Audio Picture select Reset to defaults f gt adjust Picture mode Contrast Brightness Color Tint Sharpness example Picture menu Picture menu Audio menu p 43 45 m Use VIERA Link function VIEFA Link VIERA Link control Speaker output TV select Q change Back to TV VIERA Link menu p 32 C a 5 D 2 Q p Q lt D 2 28 VIERA Link HDAVI Control Simultaneously control all Panasonic HDAVI Control equipped components using one button on the TV remote Enjoy additional HDMI Inter Operability with compatible Panasonic products This TV supports HDAVI Control 5 function Connections to equipment DVD recorde
9. p 47 amp Language ANT Cable setup Input labels and Clock can also be changed in the Settings Menu p 47 13 14 Panasonic TV E Press to exit from a menu screen EXIT E Press to go back to the previous screen RETURN About broadcasting systems Analog NTSC Conventional broadcasting Digital ATSC New programming that allows you to view more channels featuring high quality video and sound ANT Cable setup Do you use a Cable Satellite or Fiber Optic box with this TV ANT Cable setup Step 4 of 7 use a Cable Satellite or Fiber Optic box with this TV E b Select connection type for Cable or Satellite box and go to Input labels ANT Cable setup Step 4 of 7 a Select signal type Cable Antenna ANT Cable setup Step 4 of 7 Which wiring method is used to connect your box to the TV AVIN Antenna Cable in Step 4 of 7 Yes 4 Start scanning Auto program Progress Number of analog channels Number of digital channels 0 This may take some time to complete Press RETURN to quit R e RETURN Complete scanning Auto program completed Press OK to continue Number of analog channels 10 Number of digital channels 20 p OK RETURN Label the inputs for easy identification Label inputs To name each input follow the instructions on screen When done select NEXT and press OK to go to the next step OD select or
10. 49 FORMAT 4 480i 480p FULL JUST 4 3 ZOOM aR e 1080p 1080i 720p FULL H FILL JUST 4 3 ZOOM G Use when the picture does not fill the whole screen bars appears on either side of the image or portions of the picture is trimmed 1 Some content such as film based movies are available in extra wide format Top and bottom bars are unavailable 2 Connected devices such as Cable Satellite box DVD Blu ray players and game consoles have their own aspect format settings Adjust the device s aspect settings Display the SUB MENU E Press SUB MENU to show the Sub Menu screen This menu consists of shortcuts to convenient functions Sub menu is only available when the TV is using the Antenna Cable input not when using Cable or Satellite box Set favorite Set favorite channel below Edit CH caption Edit the channel identifier p 41 Signal meter Check the signal strength p 41 E FAVORITE Channel numbers registered in Favorite are displayed on the favorite tune screen Select the desired broadcast station with the cursor or use the number buttons p 17 FAVORITE Favorite channels O select Setup SUB MENU i E select the list Channel surf mode 3 number All Set favorite Edit CH caption Signal meter select the list number to save the channel without pressing OK E Delete a favorite channel Set favorite 1 3 while holding down E To change the page FAVORITE Press repeatedly to change between
11. 57 COMPOSE ER RE 11 CONNOCHONS EE 10 11 Customer Service Directory rrrrnrnrvnvrrvnrnnnnnnnnnr 61 EAOY IPTV sene 20 38 EFN 20 47 FU 12 FM es 54 56 FAE einsi ia iiaa ston conan 18 First Time SQUID Lasses 13 16 47 Format ssencavainsssesenioneexennaseancudoceskaenewenscaneasetennes 18 49 HDAVI GOO sicdesscocsacsceredercesosawesvaricecienjsacsenncesae 28 EEE 11 51 57 Home JSO ERE 13 Image Viewer Auto rrrrnnnnnnnnnnnnnenvnnnnnnnnnrenenennenne 47 Mer 17 PUNE a e sneageoentyuanteueane a 21 47 LIAS NE ETT 13 47 EEE 12 Lock Parental Control arevurvrnnvnrennnvvnnvrnnnnn 46 48 Media P VON ssassn ania 20 22 27 EE 42 MOVIES VIDEO cisicvcdvevsscacacavecssvenvseveasssneveonsdanveeveseness 26 1 10 EEE 27 Me 12 Network camera rrmnunnnnnnnnnnnnnnnnvnnevnnennen 33 35 37 39 Network services rrurarnrnnnnnnnnnnvnnnvnnnnnnr 15 34 38 47 PEN 7 8 PHOTO NM EE EAEN RAEAN 24 25 Picture Advanced arnrrnnnnnnnnnnnnnnnnvnnnvnnnnnevnnevnnennne 44 Picture settings medan 43 44 POT EE E T E EE EEE 12 Remote Control dcctceestece corsorctsbiewacetvacexietcenduisiaeenten 12 Reset a linennsssrineronrenrrrrrirnrunrnrerrorrnnrnrerrerrorrnrenne 47 1 5 AII E PEET A E EE EAA AEA A AET 4 Par 17 105 EE EE PENE 14 40 D LG o MEET TEEN 22 50 so 6 LAE Melela AAE 41 gt 515 0 EE EN T 45 Ne ed 2 1195 10 REE 57 Store Demonstration rrwvrrrnnnrvrnrrvrnnnvarevvnnensnennnne 13 Sub MENU 2 cc cece eeecceeeceeeceeeeceeeeeeeue
12. 7c 65 e9 A R Co gt Start camera search amp Before you start to search for a camera switch the camera to registration mode amp Search condition also depends on Network settings gt Delete camera information gt Disconnect to camera Disconnected will be displayed in Status gt Set to default use Displayed Default next to camera name Available only when reconnecting gt Connect to Camera Connect will be displayed in Status Press OK to start the Software update screen select Follow directions on the screen amp Set Clock first p 15 SODIAIOS YIOMION luis amp gt Q lt D O D Q 3 38 Using EASY IPTV This function allows you to access Internet services such as VOD Video on demand music distribution or social networking service etc easily with selecting the VIERA TOOLS icon You need a broadband environment to use this service Preparations amp Network connections p 34 amp Network settings p 35 37 Display VIERA TOOLS RETURN example Services contents VOD Video On Demand Music distribution Radio service m Press to exit from SNS Social Network Service a menu screen EXIT e amp Not all EASY IPTV services are available depending on your country or area your select p 13 E Press to go back to amp Available EASY IPTV services are subject to change without notice the
13. A 1 y O A Wireless LAN adapter a O A A Keyboard PP A Flash memory B Keyboard OOO A O A Wireless LAN adapter B Keyboard mH EE A Flash memory B Wireless LAN adapter AB as Ss B O B o VIERA Link HDAVI Control HDMI connections to some Panasonic equipment allow you to interface automatically p 29 This function may not work normally depending on the equipment condition amp The equipment can be operated by other remote controls with this function on even if the TV is in Standby mode Image or sound may not be available for the first few seconds when playback starts Image or sound may not be available for the first few seconds when input mode is switched Volume function will be displayed when adjusting the volume of the equipment amp f you connect equipment that has HDAVI Control 2 or later function to the TV with an HDMI cable the sound from the DIGITAL AUDIO OUT terminal can be output as multi channel surround HDAVI Control 5 is the newest standard current as of December 2010 for the HDAVI Control compatible equipment This standard is compatible with the conventional HDAVI equipment HDMI connection HDMI high definition multimedia interface allows you to enjoy high definition digital images and high quality sound by connecting the TV unit and HD devices HDMI compatible equipment 1 with an HDMI or DVI output terminal such as a Cable or Satellite box or a DVD p
14. OUT AV Equipment Conversion cable Connect to Audio i n t terminal l AUDIO OUT OO gt HDMI connection p 51 B en ad O e g Blu ray Disc player VIERA Link connection please refer to p 29 The HDMI connection is required for a 1080p signal To use COMPONENT terminals 5 2 2 COMPONENT R Good VIDEO OUT AV Equipment COMPONENT IN e g Blu ray Disc VIDEO IN 5 player O O 5 5 D O O 5 T 11 AV Equipment Basic Not HD white OUT or red DIGITAL AUDIO OUT For HDMI ARC Audio Return Channel connection see p 28 e g Amplifier PC Computer connection VGA RGB PC cable Conversion adapter if necessary HON TO Optical cable DIGITAL AUDIO IN Computer PC VIDEO IN Ce e D PC OUT Audio OUT Audio cable Connect cable which matches the audio out terminal on the computer 12 Identifying Controls TV controls indicators Front of the TV Selects channels in sequence Volume up down Displays the Main Menu Pi isonie Remote control sensor Within about 23 feet 7 meters in front of the TV set Changes the input mode Chooses Menu and Submenu entries Power indicator on red off no light C A T S sensor Plasma C A T S Contrast Automatic Tracking System p 43 amp The TV consumes a small amount of electric energy even when turn
15. Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic service facility In home service requires clear complete and easy access to the product by the Authorized Servicer and does not include removal or re installation of an installed product If removal is required to service the product it will be at the discretion of the Servicer and in no event will Panasonic Canada Inc or the Servicer be liable for any special indirect or consequential damages This warranty is given only to the original purchaser or the person for whom it was purchased as a gift of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada which product was not sold as is and which product was delivered to you in new condition in the original packaging IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by Panasonic Canada Inc or failures which result from accidents misuse abuse neglect mishandling misapplication alteration fa
16. above E Displayed Current settings and status screen If connected with wireless LAN adapter You can confirm the AP connection status SSID Wireless type Security type Encryption type Connection status Signal strength Press Wireless network SSID Wireless type Security type N A Wireless network y select me Encryption type Connection status Signal strength Connect using these settings Yes example 2 When you change Wireless network gt Press No See Sets Changes wireless network setting on p 36 and follow the directions on screen to complete the setting You need to be Connected to use network devices Please set Access point settings to Connected 35 36 Wireless network Wireless network setting E Sets Changes wireless network setting Press Wireless network and display setting screen Follow the directions on screen to complete the setting Wireless network SJ Q select A Please choose connection method pr A Search for wireless networks WPS Wi Fi Protected Setup using PIN number Manual settings dl pr DP Wi Fi Protected Setup is an easy setting of the Wi Fi Alliance s certification amp For more details on setting of an Access point please refer to operating manual for the Access point IP address DNS settings Select IP DNS setting mode and set to Automatic When IP DNS automa
17. eae 6 diagonal and larger During the Labor Limited Warranty period there will be no charge for labor During the Parts Limited Warranty period there will be no charge for parts You must carry in your product or arrange for on site service during the Limited Warranty period If non rechargeable batteries are included they are not warranted This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico This Limited Warranty is extended only to the original purchaser of a new product which was not sold as is A purchase receipt or other proof of the original purchase date is required for Limited Warranty service On Site or Carry in Service For On Site or Carry In Service in the United States and Puerto Rico call 1 877 95 VIERA 1 877 958 4372 On site service where applicable requires clear complete and easy access to the product by the authorized servicer and does not include removal or re installation of an installed product It is possible that certain on site repairs will not be completed on site but will require that the product or parts of the product at the servicer s discretion be removed for shop diagnosis and or repair and then returned Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage nor does it cover markings or retained images
18. firmware version for my TV Can I use any USB WiFi adapter to connect the TV to my wireless network How do I reset my TV to all factory defaults and settings You need a broadband high speed Internet service with a speed of no less than 1 5 Mbps p 34 Connect the TV to the Internet through your router by an Ethernet cable or a compatible Panasonic USB wireless adapter Run the Connections Test under the Network Settings menu If Connection test fails then check with your Internet service provider or router modem manufacturer if there are firewall content filter or proxy settings that may block the TV from accessing the Internet In the main menu select Setup Highlight Network Settings and press OK Select Software Update The current version and latest version software will be shown If software update is grayed out the TV is not connected to the Internet If newer version is available update your TV Follow the on screen instructions do not power off the TV until the update is complete Be patient firmware update may take a while The TV s internal software was designed to work with Panasonic s wireless adapter model DY WL10 Check www panasonic com NetConnect for updated information In the main menu select Setup Highlight Reset to Defaults and press OK Enter your password if created earlier or create a temporary new password Select Yes to re
19. g Language Clock ANT Cable setup Input labels Anti image retention Network settings D a Select VIERA Link Menu VIERA Link settings Power on link IN Co Power off link Yes Energy saving mode 69 Quick start Unselected device energy save a No stay on Default speakers TV n Panasonic TV Select On default is On E Press to exit from a menu screen EXIT Select and make other settings E Press to go back i Menu VIERA Link settings to the previous VIERA Link On screen Power on link No Power off link Yes RETURN Energy saving mode Quick start Unselected device energy save No stay on Default speakers Automatic Input Switching When using a Blu ray Disc player DVD player recorder or Home theater system the TV will automatically change to the appropriate input when playback begins on one of those devices e For a Home theater system the speakers automatically switch to the theater system Power on link Yes The TV is turned on automatically and switches to the appropriate HDMI input whenever VIERA Link compatible equipment is initially turned on and the Play mode is selected Power off link When Yes is selected and the TV is turned off all connected VIERA Link compatible equipment is also automatically turned off e A Panasonic DVD Recorder will not turn off if it is still in Rec mode e The TV remains on even if the VIERA Link
20. month sa agy m a Sort by date el SUB MENU amp RETURN Sa Slideshow qm Sort mi Drive sele e g Sort by date E Slideshow settings p 25 E Thumbnails size To change the number of photos on a thumbnail screen at a time gt 7 x 4 lt 10 x 6 Slideshow Display Slideshow settings Adjust items and select Slideshow start Slideshow settings All photos Slideshow settings lt 1 select Frame R i j i Start Slideshow Photo effect p Transition effect gt n rv gt Frame MK J Photo effect Off gt Display interval bu ab Transition effect Off Repeat playback z Soundtrack settings i ah Photo size Normal pany em a ee Burst playback Off l l RETURN a Tu To stop in mid cycle Press gt Repeat playback On Soundtrack settings Select Change nero RN example example E Slideshow settings Item Description Frame Select the Frame Off Array Collage Drift with calendar Drift Gallery with calendar Gallery Cinema Photo effect Select the display effect Off Sepia Gray scale Select the Transition effect shown between photos Off Fade in Wipe Wipe t Wipe Wipe Transition effect Slide in Slide in t Slide in Slide in Zoom in Comb Comb lt Dissolve Checker wipe Motion Random Photo size Removes the black borders that are added according to the size of the photo being displayed Normal Zoom Burst playback Continuously plays ph
21. of the panel with fingernails or other hard objects Furthermore avoid contact with volatile substances such as insect sprays solvents and thinner otherwise the quality of the surface may be adversely affected If the cabinet becomes dirty wipe it with a soft dry cloth amp f the cabinet is particularly dirty soak the cloth in a weak mild liquid dish soap and then wring the cloth dry Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth Do not allow any mild liquid dish soap to come into direct contact with the surface of the Plasma TV If water droplets get inside the unit operating problems may result amp Avoid contact with volatile substances such as insect sprays solvents and thinner otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off Do not let articles made from rubber or PVC be in contact with the TV for long periods of time Pedestal Cleaning Wipe the surfaces with a soft dry cloth If the unit is particularly dirty clean it using a cloth soaked with water to which a small amount of mild liquid dish soap has been added and then wipe with a dry cloth Do not use products such as solvents thinner or household wax for cleaning as they can damage the surface coating If using a chemically treated cloth follow the instructions supplied with the cloth Do not attach sticky tape or labels as they can make the surface of the pedestal dirty
22. on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC Caution To assure continued compliance follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices Any changes or modifications not expressly approved by Panasonic Corp of North America could void the user s authority to operate this device FCC Declaration of Conformity Model No TC 60PS34 Responsible Party Panasonic Corporation of North America One Panasonic Way Secaucus NJ 07094 Contact Source Panasonic Consumer Electronics Company 1 877 95 VIERA 958 4372 email CANADIAN NOTICE For Model TC 60PS34 This Class B digital apparatus complies with Canadian ICES 003 consumerproducts panasonic com Accessories Optional Accessory TA Check you have all the items shown Accessories L Remote Control C Batteries for the C AC cord Transmitter Remote Control N2QAYB000570 ES Transmitter 2 O e AA Battery Jj C1 Owner s Manual L Child safety C Quick start guide L Product Registration Card U S A L Pede
23. or Antenna Menu MG Or select Not used Analog only Digital only Select Auto program ANT Cable setup T ANT in Cable CPN Q t av VE NEX ox Manual program amp After the scanning is completed select Apply see p 41 All previously saved channels are erased Signal meter w gt 4 select Manual program Set manually Use this procedure when changing the channel setup or changing the channel display Also use this to add or skip channels from the channel list manually You can select a channel tuning mode Digital only Analog only in Channel surf mode p 47 q pa select next Select Edit Manual program Channel mills Favorite Manual program Channel Caption Favorite to edit nace Favorite Add Favorite Caption Add Seel lt i RETURN sa Prev page omNextpage am e Caption Changes the station identifier e Favorite Registers channels to the Favorite List e Add Adds or skips channels i Em Proceed to next page Go back to the previous page To cancel the Edit Edit Caption Edit CH caption Channel 80 101 Caption J DA OK Select ED RETURN s ABC abc am Delete Select or edit the station identifier maximum 7 characters available amp Favorite Set favorite EN p Set favorite Select the number amp Add RETURN Press OK to select Yes add or No skip gt
24. pages 1 3 2 3 3 3 or exit g f Changes the page forward backward amp Favorite channels cannot be set when using Cable or Satellite box 18 E Other Useful operations Entering characters You can use the remote control keys to enter the alphanumeric characters m Switches input mode Menu Proxy setting i Proxy address ABC abc 123 id 0 Lu E Press each number key to cycle through the ox eles see alphanumeric character Select RETURN am ABC abc sm Navigation area amp You can also use a USB keyboard not supplied to enter the alphanumeric characters amp Keyboard type p 47 You need to enter the password when you access locked channel or inputs Input your 4 digit password If it is your first time entering the password enter the password twice in Menu pe 7 a Order to register it ME Enter password amp Make a note of your password Do not forget it If you have forgotten your password consult your local dealer amp When you select a locked channel a message will be displayed that allows you to view the channel after you input your password amp Change password p 46 Operate USB keyboard You can operate non character keys as remote control keys E Key chart Keyboard ke Keyboard ke UP DOWN LEFT RIGHT GCursorkey F4 Input Enter 1 OK 1 75 Channel Down BackSpace Return when you do not Channel up Ha character 09 1 09 EZ 1 VolumeDown Volume ups
25. theater or TV speakers for audio Home theater Adjustment for the equipment output Control the theater speakers with the TV remote control Vol id This function is available only when a Panasonic Amplifier olume Up GOWN Be or Player theater is connected wie Select Speaker output Mute Es Select Home theater or TV e The sound of the TV is muted VIEFA Link r select e When the equipment is turned off the TV speakers VIERA Link control N take over Recorder E e Selecting Home theater turns the equipment on Speaker output automatically if it is in Standby mode TV E TV The TV speakers are on Back to TV Po change VIERA Link control only with the TV s remote control In the VIERA Link menu you can select HDMI connected equipment and access it quickly Continue using your TV remote control to operate the equipment pointing it at the TV Select VIERA Link control If there is more than one equipment item a number 2 Select the equipment you want to access after the name indicates the number of items e g Recorder 1 Recorder 2 Recorder 3 ed a lal LUMIX amp The number of equipment items that can be connected is three for recorders and a total of three for Home Using VIERA TOOLS p 20 theater Player Camcorder LUMIX Digital camera VIEFA Link T select Network camera er JG 20000 Pr 2 amp There is a limit to the number of HDMI connectors TV You can sel
26. trademarks of HDMI Licensing LLC in the United States and other countries SDXC Logo is a trademark of SD 3C LLC P XC AVCHD and the AVCHD logo AC b i O are trademarks of Panasonic Corporation and Sony Corporation Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories HDAVI Control is a trademark of Panasonic Corporation VIEfA GDTV A IMAGE VIEWER This product is licensed under the AVC patent portfolio license for the personal and non commercial use of a consumer to i encode video in compliance with the AVC Standard AVC Video and or ii decode AVC Video that was encoded by a consumer engaged in a personal and non commercial activity and or was obtained from a video provider licensed to provide AVC Video No license is granted or shall be implied for any other use Additional information may be obtained from MPEG LA LLC See http www mpegla com e See page 58 for more information Contents Please read before using the unit Safety Precautions PPTUTUTCCTTICCTTITOCCTIIOCOTICCTLT TE ee Tee 4 Getting started Accessories Optional Accessory 7 8 Connections J9009000009000000000090000000000000000500000020005 10 Identifying Controls stirrer 12 First Time Setupers strstr tester eee 13 Basic Features e Watching TV NTT CREEPER TCR TEE CRE TRIER CRE eee 17 Using VIERA TOOLS RATE EE Eten cr err er
27. 4 Move the cursor to a channel number select Channel Caption Favorite Add A 2 LI Gpress OK to tune z F 7 to the channel Manual program Apply Cancel l Caption Favorite Add Manual program Channel Caption Favorite Add i Changes will be lost Continue gt cc K returns to ANT Cable setup select Yes g og OD select Cy next Check the signal strength if interference is found or freezing occurs on a digital image Signal meter Channel EN Tune manually Signal strength P Current 86 Peak level 98 LA EM Gm O f the signal is weak check the antenna If no problem is found consult your local dealer amp Not available if Cable is selected in ANT in see p 40 Available only for digital antenna channels change channel Cs 5 QOK Signal intensity sjauueyD Bunes pue unipg e gt Q lt D 3 O D Q 41 42 How to Use Menu Functions Various menus allow you to set the picture sound and other functions so that you can enjoy watching TV best suited for you Display the menu Menu structure Shows the functions that can be adjusted amp Some functions will be disabled depending on the type of input signal Menu bar Ck Press OK to move to the Menu items HDMI 2 HDMI 3 Component Menu items Video Press OK to proceed to the next PC screen if available Select or enter the name of the device connected to
28. 832 x 624 mH 1 024 x 768 60 mA 1 024 x 768 70 HE EK 1 024 x 768 75 EE 1 024 x 768 85 gt Macintosh 21 1 152 x 870 Hm 1 280 x 768 60 gt 1 280 x 1 024 60 a 1 366 x 768 60 48 39 amp Signals other than above may not be displayed properly amp The above signals are reformatted for optimal viewing on your display Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz However the image will not be displayed properly if the signals exceed 1 200 lines Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers and we disclaim any liability or damage arising from operation and or performance from usage of such other maker s peripheral devices Care and Cleaning First unplug the Power cord plug from the wall outlet Display panel The front of the display panel has been specially treated Wipe the panel surface gently using only a cleaning cloth or a soft lint free cloth amp f the surface is particularly dirty soak a soft lint free cloth in diluted mild liquid dish soap 1 part mild liquid dish soap diluted by 100 times the amount of water and then wring the cloth to remove excess liquid Use this cloth to wipe the surface of the display panel then wipe it evenly with a dry cloth of the same type until the surface is dry amp Do not scratch or hit the surface
29. Back of the TV VHF UHF Antenna Power cord connection able TV or Power Cord Connect after all the VHF UHF Antenna other connections have e NTSC National Television System Committee been made ATSC Advanced Television Systems Committee Digital TV Standards include digital high definition television HDTV standard definition television SDTV data broadcasting multichannel surround sound audio and interactive television Cable amp You need to subscribe to a cable TV service to enjoy viewing their programming You may need to subscribe to a high definition HD cable service to enjoy HD programming The connection for high definition can be done with the use of an HDMI or Component Video cable p 11 amp When using a Cable box external equipment and video cables shown in this manual are not supplied with the TV When disconnecting the power cord be absolutely sure to disconnect the power cord plug from the wall outlet first amp For additional assistance visit us at www panasonic com help www panasonic ca Connection references E Antenna terminal E Pin terminals E HDMI terminal te OO ER red blue green g Qn G Firmly tighten by hand Match colors of plugs and terminals Insert firmly Insert firmly AV cable connection Best A To use HDMI terminals Homi AV IN AV Equipment HOMI IY ARC HDMI 2 Y la i OUT e g Blu ray Disc player HDMI DVI DVI
30. Do not allow long term contact with rubber vinyl products or the like Doing so will cause deterioration UONBUWIJOJU jeoiuyoa O Buiuea D puke 9101 w Ke O p gt h O Q O 53 Frequently Asked Questions FAQ If there is a problem with your TV please refer to the table below to determine the symptoms then carry out the suggested check If this does not solve the problem visit the Panasonic website for further assistance See cover How do view the picture from e Press the INPUT button on the remote to select the correct 04 devices such as a Cable Satellite box game console Blu ray or DVD player Why is there no picture or just a blue black or snowy screen being displayed Why doesn t the picture look like it is in High Definition Why do black bars appear on the top and bottom and or sides of the screen Why is the picture snowy when ANT Cable in is selected Why is the picture chaotic and or torn and or with a buzz in the speakers Why is there a black box on the screen Why is the screen blank and the power indicator blinking Why do some small spots on the screen remain bright or dark Vv ViVi V v VG Ww v VW input source Check that the device is turned on and functioning correctly Check if the power cord is plugged in and the TV is turned on front red LED light should be on not blinking Press the INPUT button on the remo
31. IPTV O Select wired or wireless connection If the Cable DSL modem is close to the TV and you have only one TV set you may choose a wired connection If the Cable DSL modem is far from the TV and or you have more TVs in the house you may want to use a wireless network Connecting to the Internet A Wired connection Directly connected If you are not using the network for connecting anything else but the TV you could just connect the TV directly to the Cable DSL Ethernet connection Wired connection Using Router If you are using the network for connecting various equipment and want to connect the TV you should use a router to connect the TV to the Internet Wireless connection If you are using the network for connecting various equipment and want to connect the TV you could also use a wireless LAN adapter and Access point to connect the TV to the Internet sm cs Modem LAN cable Ensure to use a LAN straight cable for this connection LI LAN cable E Network camera o aa a a Hub Router I gt og LJ i Access point amp To use only Network camera you can operate the features without Broadband network environment Network camera Ensure to use a LAN cross cable for this connection LAN cable Back of the TV Network settings This is a setting for connecting to a broadband environment Display the menu Ky G All a
32. Panasonic Model No TC 60PS34 60 Class 1080p Plasma HDTV 60 1 inches measured diagonally y l ff For assistance U S A Puerto Rico please call 1 877 95 VIERA 958 4372 www panasonic com help For assistance Canada please call 1 866 330 0014 www vieraconcierge ca gt Thank you for purchasing this Panasonic product Please read these instructions before operating your set and retain them for future reference The images shown in this manual are for illustrative purposes only Experience an amazing level of multimedia excitement E Do not display a still picture for a long time This causes the image to remain on the plasma screen Image retention This is not considered a malfunction and is not covered by the warranty To prevent the Image retention the screen saver is automatically activated after a few minutes if no signals are sent or no operations are performed Typical still images amp Channel number and other logos amp Image displayed in 4 3 mode SD Card photo Videogame Computer image E Set up amp Do not place the unit where it s exposed to sunlight or other bright light including reflections amp Use of some types of fluorescent lighting may reduce the remote control s transmission range y ff Li nk pane ca y A of HDMI the HDMI logo and High Definition Multimedia Interface are S E ITA trademarks or registered
33. Select up to 7 1 7 channels to block Game On Off Locks Channel 3 Channel 4 and external inputs Program Mode Set program lock status Off On V chip technology enables restricted shows to lock To set a rating according to TV ratings On Set each rating level MPAA US TV C E L R C F L R level MPAA Select U S movie ratings to lock U S TV U S TV program ratings For more information C E L R Canadian English ratings p 48 C F L R Canadian French ratings EASY IPTV On Off On Locks EASY IPTV When you select EASY IPTV icon on VIERA TOOLS screen the EASY IPTV Lock screen is displayed Type the correct password to enter the screen The menus displayed differ depending on your county or area you select p 13 Change password Change the password Input the new 4 digit password twice e This television is designed to support the Downloadable U S Region Rating System when available Available only in U S A e The Off rating is independent of other ratings e When placing a lock on a specific age based rating level the Off rating and any other more restrictive ratings will also be blocked Closed caption Display closed caption The television includes a built in decoder that is capable of providing a text display of the audio The program being viewed must be transmitting the Closed caption CC information p 51 Settings Items Item Description Reset to defaults Resets all Closed caption settings to fac
34. URN T mm EE EE E Select the Media a Vg select ms OK FORMAT INFO EG Select the data Photos Videos Music How to view the data differs depending on data storage conditions Select Title Folder e g Photos Panasonic TV E Press to exit from a menu screen EXIT E Press to go back to the previous screen RETURN Thumbnail Playback view image and operation are different depending on selected contents amp Photos view gt p 24 25 amp Videos view gt p 26 e g Photos amp Music view gt p 27 C o 5 Q lt D Q O lt OD 23 24 Photos thumbnail Features All photos Sort Drive select amp Media select Sel S Ok SUB MENU g 7 RETURN Slideshow am Sort Photo status D Slideshow I gt s Prev Next e e RETURN Stop Display Sort select menu and select item z select Photo options Display Setup SUB MENU and select item a select Setup SUB MENU gt Slideshow settings S Thumbnails size e Slideshow setting G E B gt a Y gt a ngie vie sl dd Guide and Banner Navigation Guide Single view Rotate I gt s Prev Next e RETURN Stop Displayed each view Media player L u ULE e Folders he ae JPG ascending order of nay a EE ee numeric alphabetical Ke es KV y e Sort by month RE ascending order of the
35. V NJ m Other Useful Functions Listen with SAP Secondary Audio Programming E Select the Audio mode for watching TV SAP Digital mode 3 Press SAP to select next Audio track if available when receiving a digital channel Audio track 1 of 2 English Analog mode Press SAP to select the desired Audio mode e Each press of SAP will change the Audio mode Stereo SAP Mono SAP is not available when watching TV with a Cable or Satellite box connected via HDMI Contact your Cable or Satellite operator for instructions on enabling SAP with their box Closed Caption m Switches the Closed Caption mode On or Off CC Closed caption Off Closed caption On p Closed caption On mute Closed Caption is not available when watching TV with a Cable or Satellite box connected via HDMI Contact your Cable or Satellite operator for instructions on enabling CC with their box Displaying Information E Displays and removes information When watching programming via the Antenna Cable input shows the channel banner INFO Channel Clock 1 15 2 THE NEWS 12 30 PM ABC HD cc sAP TV G 1080i Standard 4 3 030 Station SAP Signal Picture Sleep timer identifier indication resolution mode remaining time Closed caption Rating Level Aspect ratio Q D 5 te T Q ms D 2 AL Buiyoyen a a 3 OD U D D 17 Change aspect ratio and Zoom the picture E Press FORMAT to cycle through the aspect modes p
36. a player HDAVI Control 5 o 56 9 x 36 2 x 15 3 3 Including pedestal 1 443 mm x 919 mm x 387 mm Iz so 56 9 x 34 8 x 2 2 2 9 fag TV Set only 1 443 mm x 882 mm x 54 mm 72 mm Including pedestal 92 6 Ib 42 0 kg TV Set only 79 4 Ib 36 0 kg 29 TC 60PS34 72 mm pp 56 9 1 443 mm an 54 mm a ian EE E E O N gt JIE D Design and Specifications are subject to change without notice Mass and Dimensions shown are approximate OV suonsenyd peysy Ajjuenbe 4 SUOI EOIIOOdS w Ke O p h O Q e O 57 7 58 This product incorporates the following software or technology 1 the software developed independently by or for Panasonic Corporation 2 the software owned by third party and licensed to Panasonic Corporation 3 the software developed by the Independent JPEG Group 4 the software developed by the FreeType Project 5 the software licensed under the GNU LESSER General Public License LGPL and or 6 open sourced software other than the software licensed under the LGPL 7 Windows Media digital right management technology WM DRM licensed by Microsoft Corporation or its affiliates For the software categorized as 5 please refer to the terms and conditions of LGPL as the case may be at http www gnu org licenses old licenses lgpl 2 1 html In addition the
37. ails size Drive select Media player MN Phot ah yr hotos ad ad Displays data information Option menu File name Date and Size etc Photos gt p 24 25 Information differs depending Videos gt p 26 on selected data Music gt p 27 Media information E Inserting or removing an SD card USB flash memory SD card USB flash memory amp Insert the card amp Remove the card Insert the device amp Remove the device Gently insert the SD Card label surface facing front D Label surface Press in lightly p Se ASD en release fsp Push until CARP click is heard Cutout amp Compliant card type maximum capacity amp Media player only supports USB Mass storage SDXC Card 64 GB SDHC Card 32 GB microSDHC class devices Card 32 GB SD Card 2 GB miniSD Card 2 GB microSD Card 2 GB requiring microSDHC Card miniSD Card microSD Card adapter amp f a microSDHC Card miniSD Card or microSD Card is used insert remove it together with the adapter amp For more information and cautions on SD card and USB flash memory p 50 22 Viewing Contents Insert Media SD card or USB flash memory e Auto play setting Image viewer auto play p 47 Display Media player gt j example Select Drive 5 Display connected drive O eg 2 select RET
38. b or allow children to climb on the Plasma TV Place or install the Plasma TV where it cannot be pushed pulled over or knocked down Route all cords and cables such that they cannot be tripped over or pulled by curious children Do not place any objects on top of the Plasma TV If water spills onto the Plasma TV or foreign objects get inside it a short circuit may occur which could result in fire or electric shock If any foreign objects get inside the Plasma TV please consult an Authorized Service Center In the unlikely event that you receive a shock from this product it is possible that your household outlet may be wired improperly Have an electrician verify that the TV s outlet is properly wired If the symptom persists have the TV serviced by a qualified authorized technician To prevent the spread of fire keep candles or other open flames away from this product at all times E AC Power Supply Cord To prevent fire or electric shock The Plasma TV is designed to operate on a 120 V AC 60 Hz service Insert the power cord plug as far as it will go into the wall socket If the plug is not fully inserted heat may generate which could cause a fire amp The included power cord is for use with this unit only Do not use any power cord other than that provided with this TV amp Do not handle the power cord plug with wet hands amp Do not do anything that might damage the power supply cord amp When disconnec
39. cannot be selected Why Vv Vi Y Vi Y Y VW VW Make sure the volume is up and MUTE is off Confirm the TV speakers are set to ON by pressing MENU and selecting Audio gt Advanced audio p 45 Check that the correct SAP Secondary Audio Program is selected by pressing the SAP button on the remote control p 17 f the TV is connected to a Panasonic Home Theater via HDMI cable then check VIERA Link controls p 33 f the TV is connected to a Home Theater via optical cable then Check the connection the audio system is on the correct input is selected Check HDMI 1 in HDMI 2 in or HDMI 3 in analog digital audio settings p 45 Check that the correct SAP Secondary Audio Program is selected by pressing the SAP button on the remote control Check that all connections of external equipment connected to the TV are secure When using Cable or Satellite box check the device s audio settings example try changing the box s Audio Range to narrow When TV power is turned on or shut off there are electrical components that make a click sound This is normal operation Changes in the temperature and humidity of the room may cause thermal expansion and contraction that can produce sounds This is not a sign of faulty operation or a malfunction Use an HDMI cable It carries both digital video and audio signal in HD HDMI cable is the only cable needed to
40. cified by the provider It is not required for normal household use D Select Proxy setting IP address DNS settings J Vselect IP setting mode Automatic IP address 192 168 0 5 7 Subnet mask 255 255 255 0 N 192 168 0 254 DNS setting mode Automatic DNS 192 168 0 20 Proxy setting Default gateway Menu Proxy setting L_ Proxy address See D Proxy port 0 Enter address or port number and press OK amp Entering characters p 19 E Proxy address This is the address of the relay server that is connected to the target server instead of the browser and sends data to the browser Setting is only required if specified by the provider E Proxy port This number is specified by the provider together with the Proxy address Network cameras list Before using a Network camera you need to register the camera as shown below You can also set Default camera or Disconnect Delete the registered cameras 1 Press Network cameras list and display screen 2 Set Network camera setting Network cameras list Camera name Model Status Default Camera 1 BL C210A Connected sa Find cameras am Delete m Disconnect am Default camera amp For this operation please refer to the operating manual for the Network camera Menu Network settings Connection test Network connection Wireless WiFi Wireless network IP address DNS settings Network cameras list Software update Mac address 00 0b 97
41. ck if electrical products such as kitchen appliances fluorescent lights or light dimmers are nearby They may interfere with the TV s picture Try viewing a picture from another device such as a DVD player or a game console to narrow down the source of the problem Change settings of Closed Caption CC p 17 46 The TV has gone into shutdown mode to protect itself Try unplugging it for a few minutes and connecting it again If there was a temporary power surge on the AC line it may now be OK If the blinking returns call 1 877 95VIERA U S A or 1 866 330 0014 Canada The Plasma panel is made up of a few million pixels and is produced with advanced technology through an intricate process Sometimes a few pixels may be bright or dark These pixels do not indicate a defective panel and will have no impact on the performance of the TV Why is there no sound coming from the TV Why is the sound unusual distorted low volume or in another language Why is there a clicking ticking or buzzing sound coming from the TV unit What is the easiest and best way to connect a High Definition Cable or Satellite box to the TV Why does the CC button not display Closed Caption Why does the screen and back cover of the TV get warm Why doesn t the Remote Control work Why is the ANT Cable option at the top of the Input select menu gray out and cannot be selected Some menu items are grayed out and
42. compatible equipment is turned off Energy saving mode Quick Start When TV is turned off all connected VIERA Link compatible equipment is moved to ECO Standby mode automatically under these conditions e Power off link Yes The connected equipment has HDAVI Control 4 or later with Quick Start mode Minimum power consumption of Standby condition for the equipment Unselected device energy save Yes The connected VIERA Link compatible equipment will be turned off automatically when not in use under these conditions e The connected equipment has HDAVI Control 2 or later for available equipment only Example of timing for operation e When the input is switched from the HDMI Default speakers ns1011400 IAVOH n UN VYIIAN O TV is the default setting To set the Home theater system as Default speakers change the Default speakers setting from TV to Theater Sound will be output from the Home theater whenever the TV is powered on Automatic lip sync function Minimizes lip sync delays between the picture and audio when you connect to a Panasonic theater system or Amplifier TV provided setting information The following information about the TV settings can be transmitted to each piece of equipment Recorder Home theater Player that has HDAVI Control 3 or later function connected to a TV with an HDMI cable 1 On Screen Display Language setting English Espanol Frangais 2 Pane
43. connect an HD device to the TV When viewing TV via an HDMI connected device such as a Cable or Satellite box CC must be enabled at the device Closed Caption is available only at supported TV programming The main unit radiates heat and some of the parts may become hot This is normal operation and does not affect the performance of the set Ensure good ventilation Do not block the ventilation holes of the TV and do not place the TV on top of other equipment Check that the batteries are fresh are of the same type and are installed with the correct polarity amp To operate other devices such as changing channels when using Cable or Satellite boxes or operating non Panasonic Blu ray players use the remote supplied with the device During First time setup you indicated in step C that you are using Cable or Satellite box and in step b that the box is connected to one of the TV s AV inputs In this case the Antenna Cable input is deactivated to prevent unintentional switching into unused tuner To re activate press MENU select SETUP and repeat First time setup Depending on certain modes or the selected input some options are not available For example Zoom adjustments are only available when the FORMAT is changed to zoom mode OV suonsenyd peysy Ajjuenbe 4 uoneuojuy oddns 99 56 How do I get EASY IPTV to work on my TV How do I check for the latest software
44. destal to TV E Assembling the pedestal Fix securely with assembly screws Total 4 screws Tighten screws firmly Assembly screws Accessories Assembly screws 8 cam THELO9ON 4 Eroni size M5 x 25 Black Poles 2 E Set up Carry out work on a horizontal and level surface Tighten assembly screws total 4 screws loosely at first then tighten them firmly to fix securely Assembly screws Bottom view Oor is printed at the front of the poles Base 1 Rear side Hole for pedestal installation Pole Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV 1 Remove the assembly screws Total 4 screws from the TV 2 Pull out the TV from the pedestal 3 Remove the assembly screws Total 4 screws from the pole Warning Do not disassemble or modify the pedestal Otherwise the TV may fall over and become damaged and personal injury may result Do not use any pedestal other than that provided with this TV Otherwise the TV may fall over and become damaged and personal injury may result Do not use the pedestal if it becomes warped or physically damaged If you use the pedestal when it is physically damaged personal injury may result Contact your nearest Panasonic Dealer immediately During set up make sure that all screws are securely tightened f sufficient care is not taken to ensure
45. e states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied Limited Warranty lasts so the exclusions may not apply to you This Limited Warranty gives you specific legal rights and you may also have others rights which vary from state to state If a problem with this product develops during or after the Limited Warranty period you may contact your dealer or Service Center If the problem is not handled to your satisfaction then write to the warrantor s Consumer Affairs Department at the addresses listed for the warrantor PARTS AND SERVICE INCLUDING COST OF AN ON SITE SERVICE CALL WHERE APPLICABLE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY Customer Services Directory for U S A and Puerto Rico Customer Services Directory United States and Puerto Rico Obtain Product Information and Operating Assistance locate your nearest Dealer or Service Center purchase Parts and Accessories or make Customer Service and Literature requests by visiting our Web Site at http www panasonic com help or contact us via the web at http www panasonic com contactinfo You may also contact us directly at 1 877 95 VIERA 958 4372 Monday Friday 9 am 9 pm Saturday Sunday 10 am 7 pm EST m For hearing or speech impaired TTY users TTY 1 877 833 8855 Accessory Purchases United States and Puerto Rico Purchase Parts Accessories and Instruc
46. ect available items Operate the equipment with the TV remote BRO OSEN only control pointing it at the TV amp To operate the equipment read the manual for the equipment E Available TV remote control buttons Whether an operation is available differs depending on the connected equipment ES ve Move the cursor Select EG Play or Set Access Stop Return to previous menu EN E Reverse Forward SUB Display the functions menu on the equipment Available when the purpose of the keys EE is displayed on screen CC Exit Closed caption Channel Up Down SAP Select Audio Mode 0 9 Select digital subchannel CI 3 Skip Reverse Forward Pause Back to TV Returns the input selection of the device selected with the VIERA Link Control to the TV input Select Back to TV VIESA Link VIERA Link control Recorder Speaker output TV Back to TV ns1011400 JAVGH n MU VYIIAN O gt Q lt D O D Q 33 34 Using Network services Network Connections Contact your Broadband service provider NOTICE If you don t have Internet service by your local provider please order a high speed Internet service at no less than the following connection speed If you already have such service make sure that the connection speed exceeds the following amp Required speed effective at least 1 5 Mbps for SD and 6 Mbps for HD picture quality respectively Dial up Internet service cannot be used for EASY
47. ed off Do not place any objects between the TV remote control sensor and remote control Remote control Back of the TV POWER button POWER Switches TV On or Off Standby T INPUT VIEFA EXIT Select source to watch p 21 O Link x ERA TOO S Displays Main Menu p 42 Displays Sub Menu for special functions when available p 18 Colored buttons _________________ used for various functions X Volume up down VOORN O I ONS Sound mute On Off xk amp F X Dac Sor Changes aspect ratio and zoom p 18 49 Omo Switches to previously viewed channel or input External equipment operations p 33 Panasonic TV Closed Caption On Off p 17 Selects Secondary Audio Programming p 17 Exits from menu screen VIERA Link menu p 32 33 Display VIERA TOOLS Menu p 20 Viewing from SD Card p 22 27 Selects OK Change Go back to previous menu Channel up down when viewing from ANT Cable source Displays or removes the channel banner p 17 Operates the Favorite channel list function p 18 Numeric keypad to select any channel or press to enter alphanumeric input in menus Use for digital channels p 17 First Time Setup The first time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when Auto power on p 47 is set to No Turn the TV On w
48. eration and information assistance please contact Our Customer Care Centre 1 800 1 866 330 0014 Email link Contact us email on www vieraconcierge ca For product repairs please contact Viera Customer Care Agent using the above contact info IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid adequately insured and preferably in the original carton Include details of the defect claimed and proof of date of original purchase Note e Limited Warranty for Canada Support Information 63 USA Only Disposal may be regulated in your community due to environmental considerations For disposal or recycling information please visit Panasonic website http Www panasonic com environmental or call 1 888 769 0149 Customer s Record The model number and serial number of this product can be found on its back cover You should note this serial number in the space provided below and retain this book plus your purchase receipt as a permanent record of your purchase to aid in identification in the event of theft or loss and for Warranty Service purposes Model Number Serial Number Panasonic Consumer Electronics Company Panasonic Canada Inc Division of Panasonic Corporation of North America 5770 Ambler Drive One Panasonic Way Secaucus Mississauga Ontario New Jersey 07094 U S A L4W 2T3 CANADA O 2011 Panasonic Corporation of North America All Rights Reserved Printed in U S A
49. es connected to external input terminals can be labeled for easier identification during the input selection Input select p 21 Terminals HDMI 1 3 Component Video PC Label BLANK Blu ray CABLE SATELLITE DVD DVD REC DVR GAME HOME THTR RECEIVER COMPUTER MEDIA CTR MEDIA EXT VCR CAMERA MONITOR AUX OTHER Not used e You can also enter the label name directly Entering characters p 19 devices Anti Image Pixel orbiter retention Wobbling retention 4 3 mode only Scrolling bar Enable Disable Enable Shifts the display image automatically Off Dark Mid Changes the brightness of the side bar Bright The recommended setting is Bright to prevent the panel Image retention p 52 Press OK to start the horizontal Scrolling on the screen e Press any key except the POWER key to return to previous screen You will return to the previous screen if no key operation has been performed for 15 minutes Scrolling bar Network settings See p 35 37 for more detail VIERA Link settings See p 30 31 for more detail ECO energy No signal for 10 saving minutes Stay on Power TV off No activity for 3 hours Stay on Power TV off Keyboard type Advanced setup Auto power on No Yes Image viewer auto play First time setup About Reset to defaults To conserve energy the TV automatically turns off when NO SIGNAL and NO OPERATION continue for more than 10 minutes e Not
50. es or content which may not be suitable for viewers under the age of 14 Parents are strongly cautioned to exercise discretion in permitting viewing by pre teens and early teens 18 18 years old Programming restricted to adults Contains constant violence or scenes of extreme violence E CANADIAN FRENCH RATINGS C F L R E Exempt Exempt programming G General Programming intended for audience of all ages Contains no violence or the violence content is minimal or is depicted appropriately Sa 8 General Not recommended for young children Programming intended for a broad audience but contains light or occasional violence Adult supervision recommended Gene Programming may not be suitable for children under the age of 13 Contains either a few violent scenes or one or more sufficiently violent scenes to affect them Adult supervision strongly suggested Sene Programming may not be suitable for children under the age of 16 Contains frequent scenes of violence or intense violence 18 ans Programming restricted to adults Contains constant violence or scenes of extreme violence amp The V Chip system that is used in this set is capable of blocking NR programs non rated not applicable and none as per FCC Rules Section15 120 e 2 If the option of blocking NR programs is chosen unexpected and possibly confusing results may occur and you may not receive emergency bulletins or any of the following types of programming e E
51. ess MENU and select SETUP then First time setup Congratulations i Setup is complete Enjoy your Panasonic VIERA TV RETURN M To watch TV via a Cable box Satellite receiver or any other source DVD DVR gaming device etc press the INPUT button and select the appropriate input E About wireless LAN amp Wireless LAN adapter and Access point need to be obtained separately For the latest information on applicable LAN adapters check the following website http Panasonic com NetConnect amp Check that the Access point supports WPS If it does not support WPS the encryption key of the Access point is required when configuring settings Follow the instructions on the Access point setup screen and configure the appropriate security settings For more details on setting of Access point please refer to operating manual for the Access point We recommend using 11n 5 GHz for the wireless system between the wireless LAN adapter and Access point Communication is also possible with 11a 11b and 119 2 4 GHz but the communication speed may be slower amp If the wireless system of the Access point is changed devices that could connect by Panasonic wireless LAN may no longer be able to connect TV e When EASY IPTV Network camera or other device is using the network do not disconnect the wireless LAN adapter amp Keep the TV away from the following devices as much as possible Wireless LAN
52. ettings are grayed out first set the clock see p 47 and make sure Auto power on is set to No see p 47 Settings Sleep Off timer Timer 1 5 On Off timer Items A I sound Surround Bass boost Volume leveler TV speakers HDMI 1 3 in Items Sleep minutes Timer set Inputs Channel Day On time Off time Adjust Audio quality Item Description Resets Bass Treble and Balance adjustments to factory default settings Increases or decreases the bass response Increases or decreases the treble response Emphasizes the left right soeaker volume Off On Equalizes overall volume levels across all channels and external inputs Off On Enhances audio L R response when listening to stereo Off On Enhances bass sound and provides powerful sound Minimizes volume disparity after switching to external inputs Off On Switches to Off when using external speakers Off A I sound Surround Bass boost and Volume leveler do not work if Off is selected Digital The default setting is Digital for the HDMI connection Digital Component input signal Video Select audio input terminal when DVI cable is connected Analog audio input signal The TV can automatically turn On Off at the designated date and time Item Description Off 15 30 60 90 Select how long for the TV to automatically turn off Enables or disables this timer Off On Sets the inp
53. eueeeeeueeueeseeeeaeds 18 Technical Information errvarevnnvrnnvrnnvnnvrnnvvnnnnr 49 52 TE 45 ES EEE 225057 VIERA Naa 20 28 33 VIERA TOOLS svever ean samemerkeneenmdninnnaekede 20 Viewing ONE en 23 VOlume arurrrvvrevnrnrnrennnvnnnrannsnennnevnnnnnennnenennnenunennne 12 WV AIT AUN EE 60 62 Watching TV DVD Blu ray etc rrrnrnrnnnnnnrre 1721 Wireless LAN Adapter rrrrnnrnnnrnnnnnvrnnnnnnnnnnnre 16 34 F 0 0 EE eer nee eee em etre er mer renee 18 49 XOpU w Ke O p gt h O Q O 99 60 Limited Warranty for U S A and Puerto Rico only PANASONIC CONSUMER ELECTRONICS COMPANY DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way Secaucus New Jersey 07094 Panasonic Plasma Television Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship Panasonic Consumer Electronics Company referred to as the warrantor will for the length of the period indicated on the chart below which starts with the date of original purchase Limited Warranty period at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by the warrantor PLASMA TV CATEGORIES PARTS LABOR SERVICE Up 0 42 dagona one ene
54. h picture mode to suit your taste Brightness e Display range Contrast Brightness Color Sharpness 0 100 Color Tint Tint 50 50 Tr Sharpness Z Color temp Cool 2 1 Normal Selects a choice of Cool blue Normal or Warm red color g Warm 1 2 C Color mgmt Off On On Enhances green and blue color reproduction especially outdoor scenes D C A T S Off On Automatically adjusts the screen brightness according to the ambient lighting condition D Video NR Off Weak Reduces noise commonly called snow Leave it off when receiving a strong signal Medium Strong 1 e Some menus are grayed out depending on the input signal or condition e g Zoom adjustments will be grayed out if the aspect is not set to Zoom O Aspect Screen format FULL H FILL Changes the format aspect ratio O adjustments JUST 4 3 ZOOM Lets you choose the aspect depending on the format of 7 received signal p 49 HD size Size 1 Size 2 Selects between 95 Size 1 or 100 Size 2 for the scanning area with High definition signal Select Size 1 if noise is generated on the edges of the screen Size 1 Selected item for HD size Scanning 95 Size 2 Selected item for HD size Scanning 100 H size Size 1 Size 2 Adjusts the horizontal display range to reduce noise of both side edges of an image gt Size 2 Adjusts the image size according to the aspect mode to lt reduce noise p 49 Zoom Adjusts vertical alignment and
55. ime setup from Language setting p 13 Displays TV version and software license Performing Reset will clear all settings made with Setup such as channel settings e Password setting entering p 19 Set later Image viewer settings menu will be displayed repeatedly SUOI OUN NUS N SSN 0 MOH amp gt Q lt D O D Q 47 Ratings List for parental control V chip technology enables you to lock channels or shows according to standard ratings set by the entertainment industry E U S MOVIE RATINGS MPAA NR NO RATING NOT RATED AND NA NOT APPLICABLE PROGRAMS Movie which has not been rated or where rating does not apply G GENERAL AUDIENCES All ages admitted PG PARENTAL GUIDANCE SUGGESTED Some material may not be suitable for children PG 13 PARENTS STRONGLY CAUTIONED Some material may be inappropriate for children under 13 R RESTRICTED Under 17 requires accompanying parent or adult guardian NC 17 NO ONE 17 AND UNDER ADMITTED X ADULTS ONLY E U S TV PROGRAMS RATINGS U S TV Age based Age based Possible Content FAE Grou rain JS Selections Description e Viewable Owy O All children The themes and elements in this program are specifically e Blocked designed for a very young audience including children from ages 2 6 Youth ETNE e FV Blocked Directed to older children Themes and elements in this program may TV Y7 e Viewable include mild physical or comedic violence or may frighten child
56. in use when Auto power on is set to Yes or On Off Timer is set e No signal for 10 minutes was activated will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by No signal for 10 minutes e The on screen display will flash 3 2 and 1 to indicate the last three 3 remaining minutes prior to the shut off To conserve energy the TV automatically turns off when no operation of remote and side panel key continues for more than 3 hours e Not in use when Auto power on is set to Yes or On Off Timer is set or while PC input is selected e No activity for 3 hours was activated will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by No activity for 3 hours e The on screen display will flash 3 2 and 1 to indicate the last three 3 remaining minutes prior to the shut off Select keyboard type Operate USB keyboard p 19 U S Canadian French Canadian Multilingual Standard Spanish Latin America Spanish Spain Turns TV On automatically when the cable box or connected device is turned On TV AC cord must be plugged into this device TV turns on every time the power is restored Slideshow Photos Sets the media contents or playback type to play back SD Videos Music cards automatically Set later Off Using Media player p 22 Restarts the first t
57. ith the POWER button TV Remote SWE POWER G or ie Configure your viewing mode Language Idioma Langue Step 1 of 7 Paso 1 de 7 tape 1 de 7 Select your language Q D 5 te TA p D ma D 2 Select Ae OK Selecci n Select your country Select the country where this TV is being used U S A Canada Other OK Select D RETURN S O11U04 BulAjnusp dnjas au 1Sul4 OK Select A RETURN E If you select Store Demonstration by mistake in confirmation screen will be displayed You are selecting the store demonstration mode Yes If you select Yes the picture mode will regularly reset to Vivid and a Picture Refresh message will be displayed on the screen Panasonic E Select No and return to previous screen amp If you select Yes Screen enters the store demonstration mode To display the Set viewing mode screen again as shown above and select Home Use do one of the following e Press and hold down the side POWER button for at least five seconds e Unplug power cord for 30 seconds and plug it again amp If you use any other step other than then turn the TV off or if you used the EXIT button to quit before completing the settings the next time you turn the TV on First time setup will not be automatically displayed e The settings up to that point are saved e You can start First time setup
58. l Aspect Ratio 16 9 fixed 3 Closed caption information Mode CC type Digital setting amp There is a possibility that all the GUI language information might be set from equipment that has an HDMI CEC function connected to the TV with an HDMI cable Depending on the operating conditions or the specification for each piece of equipment the setting may or may not be applied e amp For more details on the external equipment s operation please refer to the operating manual for the equipment pooueApy 31 32 VIERA Link menu and Available features Some features are disabled depending on the HDAVI Control version of the equipment Please check the list p 28 Display the VIERA Link menu lt pa select next Select the item VIESA Link VIERA Link control 4 Recorder Speaker output TV e Items in the VIERA Link menu may be grayed out if no compatible equipment is connected must be HDAVI Control 2 or later or if the equipment has not initiated a connection with the TV In that case switch the equipment s power Off and On while the Panasonic TV is On TV For further details see VIERA Link on page 30 Select E Press to exit from VIEFA Link a menu screen Back to TV Bw W mE F g Z amp A EXIT VIERA Link control 4 Home theater E Press to go back Speaker output to the previous TV screen Back to TV RETURN Speaker control You can select the Home
59. l pay en as RETURN HUE ABC gt abc Follow the instructions on screen to complete the following operations Label inputs Step 5 of 7 R gt To edit the labels to match your connected devices Label BLANK Blu ray CABLE SATELLITE DVD DVD REC DVR GAME HOME THTR RECEIVER COMPUTER MEDIA CTR MEDIA EXT VCR CAMERA MONITOR AUX OTHER Not used e Select Not used for any back panel input that has no device connected to it Afterward the input will be skipped when pressing INPUT for your convenience e The input labels can be changed at any time from the TV s setup menu Configure Network settings Select the Network type Nemorksetings Step BON Set later Go to Select Ethernet cable of wireless networl You can set in Setup menu later Wireless WiFi Start Wireless network p 16 OK Select coy Return Select the setting mode Automatic Press OK to start setup automatically Neworksetiogs Step oN Error screen is displayed when Network connection has failed Manual Go to Manual setting RETURN OK Select Gi Automatic JL JG Start connection test m Manual setting Network settings Step 6 of 7 Co n n ect i o n test ae Step 6 of 7 Connection Mac address e rro r Select Change Default gateway DNS setting mode Automatic DNS RETURN RETURN E Error screen Network settings Step 6 of 7 3 C
60. layer can be connected to the HDMI connector using an HDMI compliant fully wired cable e HDMI is the world s first complete digital consumer AV interface complying with a non compression standard amp f the external equipment has only a DVI output connect to the HDMI terminal via a DVI to HDMI adapter cable 2 amp When the DVI to HDMI adapter cable is used connect the audio cable to the audio input terminal amp Audio settings can be made on the HDMI 1 in HDMI 2 in or HDMI 3 in menu screen p 45 Applicable audio signal sampling frequencies L PCM 48 kHz 44 1 kHz 32 kHz 1 The HDMI logo is displayed on an HDMI compliant device 2 Enquire at your local digital equipment retailer shop amp Use with a PC is not assumed amp All signals are reformatted before being displayed on the screen amp f the connected device has an aspect adjustment function set the aspect ratio to 16 9 amp These HDMI connectors are type A amp These HDMI connectors are compatible with HDCP High Bandwidth Digital Content Protection copyright protection A device having no digital output terminal may be connected to the input terminal of either COMPONENT or VIDEO to receive analog signals The HDMI input terminal can be used with only the following image signals 480i 480p 720p 1080i and 1080p Match the output setting of the digital device For details of the applicable HDMI signal
61. ld onto the power plug body when disconnecting cord e Do not use a damaged power plug or socket outlet If a problem occurs such as no picture or no sound or if smoke or an abnormal odor is detected from the Plasma TV unplug the power supply cord immediately Continued use of the TV under these conditions might cause a fire or permanent damage to the TV Have the TV evaluated by an Authorized Service Center Servicing of the TV by unauthorized personnel is strongly discouraged due to its high voltage If water or an object gets inside the Plasma TV if the Plasma TV is dropped or if the enclosure becomes damaged unplug the power supply cord immediately A short circuit may occur which could cause a fire Contact an Authorized Service Center for an evaluation Do not cover the ventilation holes Doing so may cause the Plasma TV to overheat which can cause a fire or damage to the Plasma TV Leave a space of 3 15 16 10 cm or more at the top left and right and 2 3 4 7 cm or more at the rear When using the pedestal keep the space between the bottom of the TV and the pedestal or stand surface clear from objects that may obstruct ventilation E When Moving the Plasma TV Be sure to disconnect all cables before moving the Plasma TV Moving the TV with its cables attached might damage the cables which in turn can cause fire or electric shock amp To prevent an electric shock disconnect the power plug f
62. mergency Bulletins Such as EAS messages weather warnings and others e Locally originated programming News Political Public Service Announcements Religious Sports Weather 48 Technical Information Aspect Ratio FORMAT Press the FORMAT button to cycle through the aspect modes This lets you choose the aspect depending on the format of the received signal and your preference p 18 e g in case of 4 3 image e FULL 4 _ a 16 l _ S O T GT of Olf 3 9 9 O A 7 O 4 O Enlarges the 4 3 image rom to the screen s side edges Stretches to justify the 4 3 image to the four corners of the Recommended for anamorphic picture screen Recommended for normal TV broadcast FILL 4 3 4 5 E ene 4 gt UV w A 3 9 3 LI Side bar P the 4 3 image T to the screen s a Standard g edges The side edges of the image are cut off Note that Image retention of the side bar may occur from displaying it for a long time eo Sale amp 480i 4 3 480i 16 9 480p 4 3 480p 16 9 FULL JUST 4 3 or ZOOM amp 1080p 1080i 720p FULL H FILL JUST 4 3 or ZOOM 4 I Enlarges the 4 3 image to the entire screen Recommended for Letter Box amp Zoom adjustments Vertical image position and size can be adjusted in ZOOM Select Zoom adjustments on the Picture menu p 43 Q V position Vertical position adjustment V size Vertical si
63. microwaves and other devices that use 2 4 GHz and 5 GHz signals Otherwise the TV failures such as malfunction may occur due to the radio wave E Press to exit from a menu screen interference WPS Wi Fi Protected Setup E Press to go back to E Wireless network First time setup in the previous screen OD Display Wireless network 2 Select the connection method select Wireless network RETURN Please choose connection method Search for wireless networks WPS Wi Fi Protected Setup using push button e Follow the directions on screen to complete the setting amp See page 36 for more information Watching TV Turn power on POWER Remote TV CC SAP INPUT og POWER POWER Please select correct input gt RS p 21 INPUT G g Select a channel number SUB E To directly enter the digital channel as number G y or 79 EN my When tuning to a digital channel Ss ME press the button to enter the minor down 0 number in a compound channel Ae Also available side CH button on the unit number V For Cable Satellite box connection example CH15 1 do Use your connected box s remote control FORMAT INFO FAVORITE eB Reselect Cable or Antenna in ANT in of ANT Cable setup to switch the signal reception between cable TV and antenna p 14 40 The channel number and volume level remain the same even after the TV is turned off GITT Kr Tr Fr
64. nce 0 255 bits 16 235 Auto Switches the RGB range Standard 16 235 Nonstandard Nonstandard depending on the HDMI signal information Off Auto Photo Sets content type to each HDMI input Graphics Auto Switches content type automatically depending on the HDMI signal information Photo Best setting for JPEG viewing Graphics Best setting for On Screen display of connected equipment e Some menus are grayed out depending on the input signal or condition e g 3 2 pulldown will be grayed out if the input signal is high definition or you are viewing photos etc Advanced 3D Y C filter picture Color matrix Block NR Mosquito NR Black level 3 2 pulldown 24p Direct in 44 Off On Minimizes noise and cross color in the picture SD HD Selects image resolution of component connected devices SD Standard Definition HD High Definition Only used with 480p video signal Off On Reduces noise of specific digital signals of DVD Cable box etc Off On Reduces HDTV flicker noise in the contoured sections of an image Dark Light Selects Dark or Light Valid only for external input signals Off On Auto Adjusts the picture recorded in 24 fps for optimum quality 60Hz 48Hz 48Hz Achieves more cinematic playback by reproducing the movie contents at twice the speed of 24 frames per second D Audio settings Settings Reset to defaults Bass Treble Balance Advanced audio G Timer settings If the Timer s
65. nment enjoyable and safe To prevent personal injury or death be sure to follow the following safety guidelines TUNE INTO SAFETY e One size does NOT fit all Follow the manufacturer s recommendations for the safe installation and use of your flat panel display Carefully read and understand all enclosed instructions for proper use of this product e Don t allow children to climb on or play with furniture and television sets e Don t place flat panel displays on furniture that can easily be used as steps such as a chest of drawers e Remember that children can become excited while watching a program especially on larger than life flat panel displays Care should be taken to install the display where it cannot be pushed pulled over or knocked down Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children WALL MOUNTING IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY ALWAYS e Use a mount that has been recommended by the display manufacturer and or listed by an independent laboratory such as UL CSA ETL Follow all instructions supplied by the display and wall mount manufacturers e If you have any doubts about your ability to safely install your flat panel display contact your retailer about professional installation Make sure the wall where you are mounting the display is appropriate Some wall mounts a
66. nt Secure Content so that their intellectual property including copyright in such content is not misappropriated This device uses WM DRM software to play Secure Content WM DRM Software If the security of the WM DRM Software in this device has been compromised owners of Secure Content Secure Content Owners may request that Microsoft revoke the WM DRM Software s right to acquire new licenses to copy display and or play Secure Content Revocation does not alter the WM DRM Software s ability to play unprotected content A list of revoked WM DRM Software is sent to your device whenever you download a license for Secure Content from the Internet or from a PC Microsoft may in conjunction with such license also download revocation lists onto your device on behalf of Secure Content Owners Index ojo E E E B Accessories NDD F Ant Cable rrrvnrnvrnnnrnnnnrnnevnnennnnevnnenvnnevvnnnnunevvnn 14 40 Antenna EEE ES 10 14 MI 45 Audio Advanced ae 45 Auto Power ON ccccccccecceesse cee ceueseueseueeueeeueeeaees 47 DP 40 PN 9 EE OE eet aoe seen oie E A 10 11 Care amp Cleaning awisisscasvonssensaanieaincsatvocaeweiaanidutnacts 53 CC Closed Caption cccccceeeeeeseeeeeeeees 17 46 51 Channel revnevrnnrvvnvennnvennennnnvennuvenunerr 14 17 18 40 41 Channel Surf Mode rwrvrrvrarnnnvrnrnnevsvenvnnvvvneennr 18 47 Goo EEE ER ENE 15 47 CGObred Bills saa 12 Component uuaammmssemesmesnedeeismemne 11
67. omplete Network settings Helpful information is displayed when you successfully complete Network settings Network settings Step 6 of 7 Network settings are complete You can use EASY IPTV EASY IPTV lets you enjoy Internet contents on your VIERA TV dnjes sw 1514 faut bunen Panasonic TV OK Select D RETURN Retry Go to Start connection test Set later Go to O E Press to exit from a menu screen EXIT E Press to go back to the previous screen RETURN Adjust the Clock Set clock When done select NEXT and press OK to go to the next step E Manual setting Set clock Step 7 of 7 Adjust the TV s date and time Minutes Ki OK o E 9 e RETURN Follow the instructions on screen to complete the following operations Set clock Step 7 of 7 Adjust the TV s date and time Select aonan 3 Change amp Manual Adjust the clock manually Year Month Day Hour Minute Auto The clock is adjusted automatically via Internet service Only available when the TV is on a network gt Set Network settings first Time zone Select your time zone EST CST MST PST AKST HST NST AST RETURN DST Set DST Daylight Saving Time setting On Off On Advances the clock one hour from the time it is set according to the time zone 1 5 16 Complete First time setup Congratulations You are done The First time setup can be repeated at any time Pr
68. on the glass panel resulting from viewing fixed images including among other things non expanded standard 4 3 pictures on wide screen TV s or onscreen data in a stationary and fixed location The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by the warrantor or failures which result from accidents misuse abuse neglect bug infestation mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification or commercial use Such as in a hotel office restaurant or other business rental use of the product service by anyone other than a Factory Service Center or other Authorized Servicer or damage that is attributable to acts of God THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY As examples this excludes damages for lost time cost of having someone remove or re install an installed unit if applicable or travel to and from the servicer The items listed are not exclusive but are for illustration only ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE LIMITED WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY Som
69. onitor is connected to the TV the CC needs to be set up on the recorder or output monitor UOIJEWOJU jeoiuyoa w Ke O mi h O 3 Q O 51 52 4 3 side bars Do not display a picture in 4 3 mode for an extended period as this can cause Image retention Image retention to remain on either or both sides of the display field Side Bar To reduce the risk of such Image retention change the brightness of the side 4 3 bars Screen S See page 43 for more information Display amp The side bar may flash alternate black white depending on the picture PC Input Terminals Signal Names for D sub 15P Connector Pin No Signal Name Pin No Signal Name Pin No Signal Name DPDC R GND Ground NC not connected ODAO NC DOODO B amp GND Ground HD SYNC VD D Ground NC Pin Layout for PC Input Terminal Input signal that can be displayed Mark Applicable input signal for Component Y Ps Pr HDMI and PC horizontal frequency kHz vertical frequency Hz COMPONENT HDMI PC 525 480 60 525 480 60p 750 720 60p 1 125 1 080 60 1 125 1 080 60p 1 125 1 080 60p 1 125 1 080 24p 1 125 1 080 24p 640 x 400 70 E E 640 x 480 60 HENDE Macintosh13 640 x 480 f gt 640 x 480 75 per 852 x 480 60 EE a 800 x 600 60 mA 800 x 600 75 a 800 x 600 85 a Macintosh16
70. otos that were shot On Off Set Display interval each image is displayed in the Slideshow mode Short Fast Normal Slow Very slow Repeat playback Turn the Slideshow Repeat cycle function on or off Off On Select the music Off Music 1 Music 2 Music 3 Music 4 Music 5 User selected Auto User selected Plays the soundtrack registered in the Soundtrack settings below Auto Plays the songs on the SD card or USB flash memory e Picture quality may become lower depending on the slideshow settings e Picture setting may not work depending on the slideshow settings Display interval Soundtrack settings E Soundtrack settings 1 Select Soundtrack Select User select Select the song and register settings Slideshow settings Soundtrack settings SEK JE Ta a 1 select Start Slideshow OFF PE n pl EG N Frame Off Music 1 J Sountrack settings METT son Photo effect Off Music 2 l This song All songs in folder age ry Transition effect Off Music 3 _ mp ya p r e x T ai LO 7 Photo size Normal Music 4 TS i 2 Fae O A ds Burst playback Off Music 5 M r OG H H Select g OK SD memory card Display interval Normal User selected re Qi cera iro 4 Repeat playback On Auto Sa Slideshow PE mim Drive select mm Media select This song Register current music example User selected 03 XXXX JJ All songs in folder Register the music in a folder Je Rjd eipayy bulsn e
71. previous EE E Using USB keyboard USB connections p 50 amp Keyboard type p 47 amp Operate USB keyboard Entering characters p 19 Other settings In O m Adjust the Picture and Audio Display Menu Picture select Reset to defaults i gt f adjust ng Contrast S Brightness Color Tint Sharpness Select the item example Picture menu Picture menu Audio menu SEN 3 Q select p 43 45 Picture sid K f m Use VIERA Link function Audio D VIETA Link O select VIERA Link VIERA Link control X h ee Speaker output TV Back to TV VIERA Link menu p 32 Network Camera You can operate the Network camera from the TV remote and also check the images from the Network camera on your TV VIERA Link control only with the TV s remote control p 33 Preparations amp Network connections p 34 amp Network settings p 34 37 amp Before connecting the Network camera to the TV please complete IP setting and run Connection test With all connected equipment turned on Display VIERA Link menu VIEFA amp If there is no registered camera displayed please set it in di Network Camera settings p 37 NG G amp There is also an option to start with sensor detection E i m Select Network camera VIEFA Link 7 Oselect VIERA Link control OK f Speaker output SA OK TV Back to TV View 4 split screen amp Default camera setting p 37
72. r DIGA HD Camcorder Home theater system Amplifier etc with HDMI cables enables VIERA Link controls Equipment with the HDAVI Control function enables the following operations Version Operations See p 30 33 for more information HDAVI Control or later e Automatic Input Switching e Power on link e Power off link e Default speakers e Speaker control HDAVI Control 2 or later e VIERA Link control only with the TV s remote control e Unselected device energy save for available equipment only HDAVI Control 4 or later e Energy saving mode with Quick Start mode HDAVI Control 3 or later e Provides setting information Language time etc e Automatic lip sync function HDAVI Control 5 e Audio Return Channel Audio Return Channel ARC is a function that enables digital sound signals to be sent via an HDMI cable back from the TV to a connected audio device E When adding new equipment reconnecting equipment or changing the setup after the connection turn the equipment on and then switch the TV on Set the input mode to HDMI1 HDMI 2 or HDMI 3 p 21 and make sure that the image is displayed correctly VIERA Link HDAVI Control is based on the control functions provided by HDMI and industry standard known as HDMI CEC Consumer Electronics Control with unique function that we have developed and added As such its operation with other manufacturers equipment that supports HDMI CEC cannot be guaranteed Please
73. re not designed to be mounted to walls with steel studs or old cinder block construction If you are unsure contact a professional installer e A minimum of two people are required for installation Flat panel displays can be heavy Panasonic recommends that a qualified installer perform the wall mount installation See page 4 The American Academy of Pediatrics discourages television viewing for children younger than two years of age i C raumer Electronics ss0caton www CE org safety FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet
74. refer to the individual manuals for other manufacturers equipment supporting the VIERA Link function m HDMI cable This function needs an HDMI compliant fully wired cable Non HDMI compliant cables cannot be utilized It is recommended that you use Panasonic s HDMI cable Recommended part number RP CDHS15 4 9 ft 1 5 m RP CDHS30 9 8 ft 3 0 m RP CDHS50 16 4 ft 5 0 m For more details on the external equipment s connections please refer to the operating manual for the equipment VIERA Link Connections with VIERA Link function E Terminal overview i mn ANTENNA I Cable In I I COMPONENT IN VIDEO IN Homi AV IN HDMI 1 ARC HDMI 2 V _ ET HDMI cable DVD recorder DIGA with VIERA Link function E Connecting Home theater system AV amp HDMI 1 is recommended Homi AV IN HDMI 1Y ARC HDMI 2 V ns1011400 JAVGH nU VHJIA O l l I Home theater systems with VIERA Link function l l les qo HDMI cable AUDIO OUT MOM Tott l 5 Optical cable 1 AV amp with DVD recorder DIGA 1 VIERA Link function with VIERA Link function No optical cable is necessary when connecting a Home Theater supporting HDAVI control 5 with an HDMI cable Audio will be supported via ARC Audio Return Channel p 28 One AV amp and one DVD recorder DIGA can be operated with this unit m Connecting HD Camcorder Digital camera Pre
75. ren e Blocked under the age of 7 TV G e Viewable General audience It contains little or no violence no strong language e Blocked and little or no sexual dialogue or situations e D L S V all selected Parental guidance suggested The program may contain infrequent TV PG e Any combination of coarse language limited violence some suggestive sexual dialogue D L S V and situations Guidance me e D L S V all selected TV 14 e Any combination of Parents strongly cautioned This program may contain sophisticated themes sexual content strong language and more intense violence gt L S V all selected TV MA e Any combination of Mature audiences only This program may contain mature themes LSV profane language graphic violence and explicit sexual content FV Fantasy Cartoon Violence V Violence S Sex L Offensive Language D Dialogue with sexual content m CANADIAN ENGLISH RATINGS C E L R E Exempt Exempt programming includes news sports documentaries and other information programming talk shows music videos and variety programming C Programming intended for children under age 8 No offensive language nudity or sexual content C8 Programming generally considered acceptable for children 8 years and over No profanity nudity or sexual content G General programming suitable for all audiences PG Parental Guidance suggested Some material may not be suitable for children 144 Programming contains them
76. rom the wall outlet as a safety precaution before carrying out any cleaning amp Transport only in upright position Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry amp Using a dry cloth clean any dust from the power supply cord and plug regularly Build up of dust on the power cord plug can increase humidity which might damage the insulation and cause a fire This Plasma TV radiates infrared rays therefore it may affect other infrared communication equipment Install your infrared sensor in a place away from direct or reflected light from your Plasma TV The TV will still consume some power as long as the power supply cord is connected to the wall outlet Display panel is made of glass Do not apply strong force or impact to the display panel This may cause damage resulting in injury The TV is heavy TV should be handled by 2 or more people Support as shown to avoid injury by the TV tipping or falling CEA CHILD SAFETY NOTICES WARNING Flat panel displays are not always supported on the proper stands or installed according to the manufacturer s recommendations Flat panel displays that are inappropriately situated on dressers bookcases shelves desks speakers chests or carts may fall over and may cause personal injury or even death The consumer electronics industry of which Panasonic is a member is committed to making home entertai
77. rr reir 20 e Watching content from external devices 21 e Using Media player UCT RLE TLD LE LS TLULE LS ree eee cee 22 Advanced Features e VIERA Link HDAVI Control s sseet errs 28 Using Network SErviCes tstssrssrrrrrrsenrsnnnnnnnnnnnn 34 e Network Connections uununnnunnnnnunnnnunnnnnvunnnnunnn 34 e Network settings unuunuununnvnnnnnnunnnnnnnnnnvnnnnnvunnnn 35 Using EASY IPTV trtrrrrrsrsssssssssssssssnsnnnnnnnnnnnn 38 e Network Camera etree treet rrr errr reer rrr 39 e Editing and Setting Channels ss 40 e How to Use Menu Functions 42 e Picture settings eer rere reer errr rrr 43 e Audio settings nnuunnnnunnnnnnnnunnnnnnnnnnnunnnnnnunnnnnunn 45 e Timer settings nuuunnunuunnnunnnnnnnnnnnnnnnnnnnnnnunnnuunnn 45 e Lock ununnuununnnvunnnnvnnnnnnunnnnnnnnnnunnnnnvunnnnvunnnnnvnnun 46 Closed caption nanununnunnununnunnunnununnuununnununnuunun 46 e Setup uunnuuunnunnunnnnnvunnnnnunnnnuwnnnuvnnnnnvnnnnnvunnnnuunn 47 Support Information Ratings List for parental Control essere 48 Technical Information tte 49 e Care and Cleaning E E sek 53 e Frequently Asked Questions FAQ evene 54 Specifications usduadeGesdaesdeadusdsucieceiascaueaiaissaeani 57 Index Per rer 59 e Limited Warranty for U S A and Puerto Rico only re 60 e Customer Services Directory for U S A and Puerto Rico treer 61 e Limited Warranty for Canada re 62 Q D 5 te T Q ms D 2 pooueApy uoneuojuy oddns
78. s see p 52 DIGITAL AUDIO OUT terminal You can enjoy your Home theater by connecting a Dolby Digital 5 1 channel decoder and Multi Channel amplifier to the DIGITAL AUDIO OUT terminals amp Depending on your DVD player and DVD Audio software the copyright protection function may operate and disable optical output When an ATSC channel is selected the output from the DIGITAL AUDIO OUT jack will be Dolby Digital When an NTSC channel is selected the output will be PCM amp When playing a movie on SD Card Movie player when the sound has been recorded in Dolby Digital the output from the DIGITAL AUDIO OUT terminal will be Dolby Digital When the sound is recorded in other formats the output will be PCM Closed Caption CC amp For viewing the CC of digital broadcasting set the aspect to FULL If viewing with H FILL JUST ZOOM or 4 3 characters might be cut off The CC can be displayed on the TV only when the receiver such as a Cable box or satellite receiver has the CC set to ON within the device itself Check with your Cable or Satellite provider for instructions The TV s CC button does not operate the Satellite or Cable box s CC function If the CC is set to On on both the receiver and TV when the signal is 480i except for the HDMI connection the CC may overlap on the TV If a digital program is being output in analog format the CC data will also be output in analog format If the recorder or output m
79. screws are properly tightened during assembly the pedestal will not be strong enough to support the TV and it might fall over and become damaged and personal injury may result When removing the pedestal do not remove the pedestal by any methods other than the specified procedure Otherwise the TV and or pedestal may fall over and become damaged and personal injury may result Installing the remote s batteries Incorrect installation may cause battery leakage and corrosion resulting in damage to the remote control e Do not mix old and new batteries e Do not mix different battery types such as alkaline and manganese batteries e Do not use rechargeable Ni Cd Note the correct polarity batteries or Do not burn or break batteries Power cord connection To attach To remove Keep pushing both Insert it firmly until the sides until they snap tabs on both sides click and pull into place Kiossasoy EUONdQ seuossaoov Mund 10 Connections Connection Panels Front of the TV LAN DIGITAL AUDIO OUT I EEE a HH DIG AUDIO OUT HDMI 1 W ARC HDMI 2 Y SD card slot p 22 E G USB1 2 one connector O VIDEO m m terminal Back of the TV PC terminal Antenna or Cable connection See page 9
80. set the TV Model number is subject to change without notice Specifications TC 60PS34 Power Source AC 120 V 60 Hz So Rated Power 3 E Standby condition 0 2 W 32 AC ype gt 2 Aspect Ratio 16 9 Visible screen size 60 class 60 1 inches measured diagonally 5 W x H x Diagonal 52 3 x 29 4 x 60 1 1 330 mm x 748 mm x 1 526 mm lt No of pixels 2 073 600 1 920 W x 1 080 H 5 760 x 1 080 dots WM Audio Output 20 W 10 W 10 W 10 THD VGA SVGA XGA WXGA SXGA PC signals Horizontal scanning frequency 31 69 kHz Vertical scanning frequency 59 86 Hz Channel Capability in Ah Digital Analog VHF UHF 2 69 CATV 1 135 n Temperature 32 F 104 F 0 C 40 C Operating Conditions Humidity 20 80 RH non condensing IPEN VIDEO RCA PIN Type x1 1 0 V p p 75 9 AUDIO L R RCA PIN Type x 2 0 5 V rms Y 1 0 V p p including synchronization COMPONENT IN Pp Pr 0 35 V p p 3 AUDIO L R RCA PIN Type x 2 0 5 V rms 3 TYPE A Connector x 3 o e This TV supports HDAVI Control 5 function gt pc D SUB 15PIN R G B 0 7 V p p 75 Q S HD VD 1 0 5 0 V p p high impedance 3 USB12 USB 2 0 Type A connector x 2 DC5V MAX500mA LAN for IPTV RJ45 10BASE T 100BASE TX Card slot SD CARD slot x 1 DIGITAL AUDIO OUT PCM Dolby Digital Fiber Optic 3D Y G FILTER CLOSED CAPTION FEATURES V Chip EASY IPTV VIERA IMAGE VIEWER Medi
81. size when aspect setting is ZOOM adjustments a 43 Settings Items PC adjustments Reset to defaults Sync Dot clock H position V position Item Description Resets PC adjustments H amp V The H and V sync signals are input from the HD VD connector p 52 On green Uses a synchronized signal on the Video G signal which is input from the G connector p 52 Alleviates the problem if a picture appears to be vertically striped flickers partially or is blurred Adjusts the horizontal position S Adjusts the vertical position BLI Se Clock phase Input resolution H frequency V frequency HDMI settings HDMI DVI RGB range HDMI 1 3 Contents type HDMI 1 3 Alleviates the problem if the whole picture appears to flicker or is blurred First adjust the Dot Clock to get the best possible picture then adjust the clock Phase so that a clear picture appears amp t may not be possible to display a clear picture due to poor input signals Switches to wide display amp VGA 640x480 pixels WVGA 852x480 pixels XGA 1 024x768 pixels WXGA 1 280x768 pixels amp Options change depending on signals Displays the H Horizontal V Vertical frequencies Display range Horizontal 15 110 kHz Vertical 48 120 Hz Auto Prevents the blown out highlights and blocked up shadows when Standard a wide range signal is received Selects between standard RGB range 16 235 bits or non complia
82. software categorized as 5 are copyrighted by several individuals Please refer to the copyright notice of those individuals at http www am linux jp dl DTV11U The LGPL software is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE At least three 3 years from delivery of products Panasonic will give to any third party who contact us at the contact information provided below for a charge no more than our cost of physically performing source code distribution a complete machine readable copy of the corresponding source code covered under LGPL Contact Information cdrequest am linux jp Source code covered under LGPL is also freely available to you and any other member of the public via our website below http www am linux jp dl DTV11U For the software categorized as 5 and 6 please refer to the applicable license terms included in the Setup menu on product Further for WM DRM categorized as 7 please be aware of the following a This product is protected by certain intellectual property rights of Microsoft Use or distribution of this technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary b Content providers are using the digital rights management technology for Windows Media contained in this device WM DRM to protect the integrity of their conte
83. ss INPUT and select an available HDMI terminal then connect the camcorder to this input After connection confirm the HDAVI control functions p 30 33 L gt Q lt D 3 O D Q A N at NOG HDMI mini HDMI cable HD Camcorder LUMIX with VIERA Link with VIERA Link function function If connection or setting of equipment compatible with HDAVI control is changed switch the power of this unit Off and On again while the power of all equipment is On so that the unit can correctly recognize the connected equipment and check that the connected equipment playback operates amp Individual HDMI equipment may require additional menu settings specific to each model Please refer to their respective manuals amp When audio from other equipment connected to this unit via HDMI is output using DIGITAL AUDIO OUT of this unit the system switches to 2CH audio When connecting to an AV amp via HDMI you can enjoy higher sound quality amp Some devices use Mini HDMI terminal HDMI type A to Mini HDMI type C cable or adapter should be used 29 30 VIERA Link settings and Available features To use all VIERA Link functions After everything is connected in VIERA Link settings menu set VIERA Link to On Some features are disabled depending on the HDAVI Control version of the equipment Please check the list p 28 Display the menu Menu Setup Channel surf mode All select 9
84. stal TBL5ZX0042 Optional Accessory Please contact your nearest Panasonic dealer to purchase the recommended wall hanging bracket For additional details please refer to the wall hanging Wall hanging bracket bracket installation manual angled Rear of the TV TY WKSP1RW Screw for fixing the TV onto the wall hanging bracket not supplied with the TV Depth of screw minimum 0 67 17 0 mm maximum 0 87 22 0 mm MG Ma Kiossasoy EUONdQ seuossaoov e Mund Holes for wall hanging View from the side bracket installation In order to maintain the TV s performance and safety be absolutely sure to ask your dealer or a licensed contractor to secure the wall hanging brackets Carefully read the instructions accompanying optional accessories and be absolutely sure to take steps to prevent the TV from tipping over Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage Take care when fixing wall brackets to the wall Always ensure that there are no electrical cables or pipes in the wall before hanging the bracket When using the angled type wall hanging bracket please ensure that there is sufficient space for the connecting cables not to press against the wall when the TV is tilted forward For safety reasons remove units no longer being used from their wall mounted locations Attaching the pe
85. te to select the correct input source Ensure all connections are correct and secure When using external video source such as a Cable Satellite box or DVD player check that the device is on and functioning correctly Press MENU on the TV s remote control If the menu is displayed then the TV is working recheck above steps Press the INFO button on the remote to confirm the type of signal being received p 17 HD signal should be 720P 1080i or 1080p Select a High Definition channel from your HD source Cable Satellite or fiber optic service HD channels sometimes broadcast non HD content Ensure that your HD source HD box Blu ray player etc is connected to the TV with an HDMI or Component cable and set to output an HD video signal Change the format aspect ratio of the picture by pressing the FORMAT button on the remote control p 18 Check the aspect settings on your external video source such as Cable Satellite box DVD Blu ray Disc player etc Note Some content such as film based movies are available in extra wide format Top and bottom bars are unavoidable When using a cable service without a box check that all connections are secure When using a cable or satellite box change the connection wiring to Composite Component or HDMI p 11 If you re using an antenna then check that connections are secure Change the position or direction of the antenna and check the Signal meter p 41 Che
86. the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus e When a cart is used use caution when moving the cart apparatus combination to NAP avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 To prevent electric shock ensure the grounding pin on the AC cord power plug is securely connected 13 D mr A WARNING CAUTION TV set Small parts can present choking hazard if accidentally swallowed Keep small parts away from young children Discard unneeded small parts and other objects including packaging materials and plastic bags sheets to prevent them from being played
87. the HDMI 1 terminal H elp l nformatio n Select D Change P RETURN Operation guide mig Customize label gg example Input labels Select the menu Picture settings Audio settings Timer Sleep On Off timer Lock Channel Game Program etc Closed Caption setting Panasonic TV Setup other settings l Select the item and adjust E Press to exit from _ Menu Picture 1 2 Cc A gt a menu screen Reset to defaults EXIT Picture mode 0x gt adjust sl Contrast 0 OF Brightness 0 a select Color 0 E Press to go back Tint 0 to the previous Sharpness 0 screen RETURN example Picture menu Reset to default will be grayed out if no changes are made in the following menus Picture PC adjustments Audio and Closed caption MAN Picture settings Adjust the image or picture quality Settings Items Item Description Reset to defaults Resets all picture adjustments to factory default settings except for Advanced picture Picture mode Vivid Provides enhanced picture contrast and sharpness for viewing in a well lit room Standard Recommended for normal viewing conditions with subdued room lighting Cinema For watching movies in a darkened room It provides a soft film like picture Game For playing video games Custom Photo Customizes each item according to your taste Photo is displayed in JPEG menu Contrast Adjusts the color brightness etc for eac
88. tic acquisition in DHCP can be used Menu IP address DNS settings L IP m mode I Subnet mask 7 select 192 168 0 5 D 255 255 2550 Default gateway 192 168 0 254 69 DNS setting mode Automatic DNS 192 168 0 20 g The acquired address is displayed 2 Each IP address is acquired automatically If you are using a broadband router IP automatic acquisition in DHCP can be used under normal circumstances If you are not sure check with the person who installed the equipment or check the instructions for each device Proxy setting Search for Wireless networks Select an access point from the ones searched for automatically and configure the settings as instructed on the screen WPS Wi Fi Protected Setup using push button You can connect the Access point to press the buttons WPS Wi Fi Protected Setup using PIN number Set the PIN code that is displayed on the TV on the Access point Manual settings Manually set SSID Security type and Encryption type to match the settings of the Access point to which to connect When connecting by 11n 5 GHz select AES as the Encryption type for the wireless LAN E Manual setting Select IP DNS setting mode and set to Manual 2 Select the item and press OK 8 Check the specifications of the broadband router and enter each IP address Or Enter each IP address as was specified by the provider 6m Trans Quire Set only if spe
89. ting the power supply cord hold the plug not the cord Do not use the power supply cord if the plug or cord is damaged Replace the cord or contact your Authorized Service Center Do not use a 3 prong to 2 prong AC plug adapters to connect your TV s plug to the wall outlet Doing so will defeat the TV plug s safety feature which can lead to a shock hazard If the wall outlet does not accommodate a 3 prong plug have a qualified electrician replace your outlet and check the associated wiring m Handling the power supply cord Insert the power plug fully into the socket outlet If the power plug is loose it could generate heat and cause fire Ensure that the power plug is easily accessible Ensure the earth pin on the power plug is securely connected to prevent electrical shock e An apparatus with CLASS I construction shall be connected to a power socket outlet with a protective earthing connection Do not touch the power plug with a wet hand This may cause electrical shock Do not use any power cord other than that provided with this TV This may cause fire or electrical shock Do not damage the power cord A damaged cord may cause fire or electrical shock e Do not move the TV with the cord plugged in the socket outlet e Do not place a heavy object on the cord or place the cord near a high temperature object e Do not twist the cord bend it excessively or stretch it e Do not pull on the cord Ho
90. tion Books on line for all Panasonic Products by visiting our Web Site at http www pstc panasonic com or send your request by E mail to npcparts us panasonic com You may also contact us directly at 1 800 332 5368 Phone 1 800 237 9080 Fax Only Monday Friday 9 am to 9 pm EST Panasonic Service and Technology Company 20421 84th Avenue South Kent WA 98032 We Accept Visa MasterCard Discover Card American Express and Personal Checks E For hearing or speech impaired TTY users TTY 1 866 605 1277 AJUO 091H ouanNd pue V S N 101 GueuemM papug O 0914 OLIANY puke V S N 101 A031 SBDIAIBS JOWOISNYD w Ke O mi h O Q O 61 62 Limited Warranty for Canada Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 PANASONIC PRODUCT LIMITED WARRANTY Panasonic Canada Inc warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by Panasonic Canada Inc Viera TV 42 amp over One 1 year parts including panel and labour Viera TV under 42 One 1 year parts including panel and labour In home
91. tory default settings Mode On Off On To display Closed captions CC on mute CC on mute To display Closed captions when the audio is muted When not using select Off Analog CC1 4 T1 4 Choose the Closed caption service of Analog broadcasting CC1 4 Information related to pictures Appears at the bottom of the screen T1 4 Textual information Appears over the entire screen Digital Primary Second The Digital Closed caption menu lets you configure the way you choose to view Service 3 4 5 6 the digital captioning Digital setting Size Text size Gee display Font Text font settings l in digital program Style Text style Raised Depressed etc Foreground Color of text Fore opacity Opacity of text Background Color of text box Back opacity Opacity of text box Outline Outline color of text Identify the setting options on the screen e The settings in Analog or Digital depend on the broadcaster amp Setup Settings Items Channel surf All Favorite mode Digital only Analog only Language Francais Clock Other function settings Item Description Sets the mode to select the channel with the Channel up down button Favorite Only channels registered as FAVORITE p 18 English Espanol Selects the screen menu language Adjusts the clock p 15 ANT Cable setup See p 40 41 for more detail Input labels Display labels of connected Selects the terminal and label of the external equipment Devic
92. ulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than a Authorized Servicer or damage that is attributable to acts of God Dry cell batteries are also excluded from coverage under this warranty THIS EXPRESS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN NO EVENT WILL PANASONIC CANADA ING BE LIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY As examples this warranty excludes damages for lost time travel to and from the Authorized Servicer loss of or damage to media or images data or other memory or recorded content This list of items is not exhaustive but for illustration only In certain instances some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or the exclusion of implied warranties so the above limitations and exclusions may not be applicable This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory WARRANTY SERVICE For product op
93. up VIERA Tools F9 Red F10 Green F11 Blue F12 Yellow Red Blus Yelloo Green For more details on setting and operation of the USB keyboard please also read the operating manuals for the USB keyboard amp Some keyboards do not have these keys a O gt lt 19 20 Using VIERA TOOLS VIERA TOOLS is the easy way to access the TV s special features They are displayed as shortcut icons on the TV screen Display VIERA TOOLS Select the item amp The icons displayed differ cm on your country or area you select p 13 4 O select No next RETURN EASY IPTV example Set each item Using EASY IPTV gt p 38 Part of Icons on VIERA TOOLS screen above provide you usable Internet service such as VOD Video on demand Music distributer or social networking service etc Game mode mp Change to Game mode Picture mode p 43 VIERA Link Panasonic ee gt pit mb VIERA Link p 32 33 Eco mode E Press to exit from a menu screen gt ECO energy saving p 47 EXIT Ea Media player E Press to go back to the previous ping gt Media player p 22 27 screen RETURN Watching content from external devices With the connected equipment turned On Display the Input select menu Panasonic TV INPUT Select the input mode Input select 1 Nel JE Not used Guo Jim OG HEM HDMi 2 0 4 DNE 5 Component AUX
94. ut to select when the TV turns on Sets the channel to select when the TV turns on Sets the day when the TV turns on SUN MON TUE WED THU FRI SAT displays the nearest future date MON FRI SAT SUN DAILY Every SUN Every MON Every TUE Every WED Every THU Every FRI Every SAT Sets the time when the TV turns on The TV will turn off after 90 minutes or as specified Sets the time when the TV turns off within 24 hours Suonoun NUS N SSN 0 MOH amp gt Q lt D 3 O D Q 45 Q Lock Locks specified channels or shows to prevent children from watching objectionable content You will be asked to enter your password each time you display the Lock menu e Password setting entering p 19 Set Custom in Mode to specify Channel Game Program and EASY IPTV settings Settings Items Item Description Mode Off Unlocks all the Lock settings of Channel Game Program and EASY IPTV All Locks all the inputs regardless of the Lock settings of Channel Game Program and EASY IPTV Custom Locks specified inputs of Channel Game Program and EASY IPTV Channel Mode Set channel lock status Off All Custom These channels All Locks all channels will be blocked Off Unlocks all channels regardless of the Custom Locks specified channels Set Channel 1 Channel 7 program rating Channel 1 7 Select a channel to lock
95. with by young children creating the potential risk of suffocation E Set up This Plasma TV may fall and can cause personal injury or even death if not installed correctly To prevent personal injury or death follow these warnings Install the Plasma TV in accordance with the manufacturer s recommended pedestal or stand corresponding hardware and installation instructions This Plasma TV is for use only with the following optional accessories Use with any other type of optional accessories may cause instability The following accessories are manufactured by Panasonic Corporation e Wall hanging bracket Angled TY WK5P1RW Be sure to ask a qualified technician to carry out the installation and set up Two or more people are required to install or remove the television amp Some wall mounts wall hanging brackets are not designed to be mounted to walls with steel studs or old cinder block constructions Ask your dealer or licensed contractor to properly secure the wall hanging bracket Do not route the TV s power cord inside the wall The power cord was not designed for in wall mounting Doing so can lead to fire hazard amp Do not place the Plasma TV or its stand on a sloped or unstable surface The Plasma TV may fall or tip over Do not support the Plasma TV on a non specified pedestal amp Do not place the Plasma TV on furniture that can easily be used as steps such as a chest of drawers Do not clim
96. ze adjustment 0J1UO9 E1USJE 10 1817 Shunney amp UONBUIJOJU BIIUYUDS O amp The width will be decreased on both sides to reduce noise uoneuojuy oddns O O Kan See page 43 for more information 49 amp The width will be increased on both sides to reduce noise 50 Data format information Compatible Data format for Media player SD card USB flash memory gt p 26 DCF Design rule for camera file system A Japan Electronics and Information Technology Industries Association s standard EXIF Exchangeable Image File Format amp Format the card with the recording equipment amp The picture may not appear correctly on this TV depending on the recording equipment used Display may take some time when there are many files and folders amp The function VIERA IMAGE VIEWER Media player cannot display Motion JPEG and still image not DCF formatted i e TIFF BMP Data modified with a PC may not be displayed amp Images imported from a PC must be compatible with EXIF 2 0 2 1 and 2 2 Partly degraded files might be displayed at a reduced resolution All JPG extension data in the card and USB flash memory will be read in Photo viewer mode The folder and file names may be different depending on the digital camera used amp Do not use two byte characters or other special codes amp The card may become unusable with this TV if file or folder names are changed

Owner`s Manual TC-60PS34 - Support

Contents

Download Pdf Manuals

Related Search

Related Contents