SANYO DP42848/DP46848 user manual
Contents
1. Match the and signs on the batteries with marks inside the Remote Control For eneloop battery recharging please refer to your battery charger s instructions battery charger not included Please recycle used up rechargeable batteries For more information visit www eneloopusa com 2 Antenna Connection for off air signals ANALOG DIGITAL ANTENNA IN gt C ue ANTENNA OR CABLE THE TUNER IN THIS HDTV CAN RECEIVE a Digital and Analog off air signals from an antenna OR b Analog or ClearOAM cable channels from a direct Cable TV connection NOTES You must use the on screen MENU to Search for ClearOAM Cable channels See page 11 For the best picture connect your Cable box or Satellite receiver to HDMI 2 3 or com ponent jacks Video2 or 3 This HDTV can receive ANY unscrambled RF signal being broadcast Need help visit our Web site at WWW SanyoCctv com or Call 1 800 877 5032 5 GETTING STARTED CONTROLS AND JACKS RIGHT SIDE PANEL Power Li key gt Volume prom keys Op i Channel VA keys u M 1 S Video Input VIDEO1 PAGE 8 To enhance video detail use the S Video jack instead of the Video Jack if available on your external equip ment An S Video connection will override a connection to the Video1 input jack Digital Audio Output PAGE 10 Use a Phono Type Coaxial Digital Audio Out Cable to con nect Digital Audi2. Local broadcasters decide which caption signals to transmit Digital Captions can be changed using the menu settings as shown 1 Use the CURSOR AV keys to highlight Digital Caption Press ENTER 2 Use the CURSOR AV keys to select the option you want to adjust 3 Use the CURSOR lt gt keys to adjust the value or Yellow E oun e Green c BT MENU ELS EXIT Sah NOTES If Background Opacity is set to transparent captions may be difficult to see Only true EIA 708B Digital Closed Captions are affected by all of these settings MENU LANGUAGE Use the CURSOR AY keys to highlight Menu Language Press ENTER Use the CURSOR AY keys to select English Espanol or Francais Press EXIT ENERGY POWER SAVER This power saving feature reduces the backlight brightness level The options are OFF the feature is off and the power con sumption is normal LOW power saving level is low and the back light brightness level is lower than normal HIGH power saving level is high and the back light brightness is set to the lowest level Use the CURSOR AV keys to highlight Energy Saver Press ENTER Use the CURSOR A keys to select Off Low or High ENERGY SAVER Move Back Exit NOTE The Energy Saver settings level varies with the Picture Sound mode MENU LANGUAGE English IMENUETITSE EXIT isan Menu operations continued on page 14 Need help visit our Web site
3. from state to state EFFECTIVE March 1 2007 For your protection in the event of theft or loss of this product please fill in the information request ed below and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS Model No Date of Purchase Serial No Purchase Price Located on back of unit Where Purchased SANYO Sanyo Manufacturing Corp 3333 Sanyo Road Forrest City AR 72335 US1 H 42 NAVJ 46 N6EE GXBJ This manual printed with Soy Ink This Manual htto www manuallib com file 26891 72
4. Delete 12 DELETING CHANNELS FROM SCAN MEMORY Use the CHANNEL AV or NUMBER keys to select the channel you want to Delete NOTE Use the 1 key to select cable channels above 99 Press ENTER to Delete the channel from Channel Scan Memory 5 Press EXIT to return to normal TV viewing MAIN MENU Channel Scan Memory Digital Caption Yous S Picture Sound Menu Language Energy Saver EXIT Batts STEN ENTER EARE MENU Channel Scan CHANNEL SCAN MEMORY Memory Screens Digital Antenna Channel 34 1 Delete This Display Los c Srl ENTER DOUG Menu DES appears after Digital Antenna Channel 34 1 you press 3 ENTER Deleted Digital Antenna Channel 34 1 Add After 3 seconds the TV screen will display Add IMPORTANT FACTS When a digital channel is deleted all of that channel s sub channels are deleted as well Only previously deleted digital channels can be added back to the Channel Scan Memory Tune to deleted channels using the number keys If one digital sub channel is added back to the Channel scan Memory list all of that channel s sub channels will be added back Need help visit our Web site at WWW SanyoCctv com or Call 1 800 877 5032 DIGITAL CAPTIONING Captioning is textual information transmitted along with the picture and sound Turning Captioning ON causes the HDTV to open these captions digital or analog and superimpose them on the screen
5. Digital Antenna Banner may contain Tuner ID Channel Number Station ID Program Rating Signal Strength Detailed Program Info Audio Information amp Program Title Analog Antenna Banner may contain Tuner ID Channel Number Station ID Program Rating amp Audio Information Cable Banner may contain Tuner ID Channel Number Station ID analog only Program Rating Signal Strength amp Audio Information 4 Reset Key Press this key twice to restore fac tory settings The TV will automatically start Channel Search and clear customized settings NOTE The Channel Scan Memory database will be replaced 5 Number Keys Press two keys to select a channel Example Press 0 then 6 to select channel 6 See 13 6 Channel Scanning CH A V Keys Press to scan through the channels in memory 7 Recall Key Press to switch between the last two channels selected Menu Navigational Keys Menu Press to display on screen menu Cursor A up V down keys Press these keys to move the cursor up and down Cursor left gt right keys Press these keys to move the cursor left and right Enter Key Press to select an option from the menu system when required Exit Key Press to exit from the menu Point towards HDTV amp Wy JJ 9 Audio Key Press to select the desired audio mode if available 0 Sleep Key Press SLEEP then 0 to set the Off Timer Off time can be set
6. guidelines for energy cause permanent discoloration efficiency or dark spots NEVER spray liquids on the screen This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc It is A C US designed and manufactured to HANDLING PRECAUTIONS LISTED meet rigid U L safety standards against risk of fire casualty and electrical hazards Handle by the cabinet only Never touch the screen when handling 9 Excessive pressure on the screen can cause SPECIFICATIONS permanent discoloration or dark spots Handling damage is not covered under warranty Power Requirement Source AC 120V 60Hz AC Power Consumption average CONTAINS MERCURY LAMPS DP42848 240 watts DISPOSE OF PROPERLY DP46848 280 watts Need help visit our Web site at WWw sanyoctv com or Call 1 800 877 5032 3 This Manual htto www manuallib com file 26891 72 CONTENTS ioe IMPORTANT SAFETY INSTRUCTIONS 2 FCC INFORMATION trarre cha Ren nona 3 TRADEMARKS 42 xriceaaa tee Ir ae Pacis 3 PROTECTING THE LCD SCREEN 3 PRECAUTIONS HANGING sceszassea dauid vd etr oorsedd ree id ed 3 IS OS All LEER 3 SPEGIFIGATIONS 0s 16 acie ce citat ROO e e cae 3 CONTENTS 4 Hello rm your new Sanyo Wide screen iili e TEFIE FETESTE ETEESI SAET LCD HDTV Don t plug me in just yet Please C read this manual carefully so you can learn Detaching the TV stand E d NND MS ENSE 4 about my many features
7. in 30 minute increments up to 3 hours NOTE The Off Timer cancels if the TV is turned off or if a power failure occurs 1D Caption Key Press to select mode options Digital CC1 CC6 or Analog CC1 CCA QuikCap or OFF QuikCap turns captions on or off with the Mute function Digital Captions can be changed using the menu settings 12 Volume Keys Press VOL to increase or decrease the audio volume 3 1 Key For Cable channels above 99 press this key then press the other two numbers Mute Key Press to mute or restore the sound Need help visit our Web site at WWw sanyoctv com or Call 1 800 877 5032 7 This Manual htto www manuallib com file 26891 72 GETTING STARTED CONNECTIONS Analog Signal Connections Video1 optional Connect an analog device such as an Analog Cable Box Satellite Receiver or VCR Composite connectors are included on your new HDTV to provide continued compatibility with older analog devices such as a VCR The S Video connector will provide the best analog resolution If you have an S Video connector on your old analog equipment you should use it instead of the standard video connector Cables are not supplied 1 Connect an AV cable to the VIDEO 1 jacks on the HDTV and to your analog AV equipment as shown Match the connector colors to jack colors Press the INPUT key to step through the signal inputs to select Video 1 ANALOG DEVICE INPUT KEY INFO S AU
8. installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION FCC Regulations state that improper modifications or unauthorized changes to this unit may void the user s authority to operate the unit TRADEMARKS PROTECTING THE LCD Manufactured under license from Dolby SCREEN Laboratories Dolby is a trademark of Dolby Laboratories The screen can be damaged if it is not maintained properly Do not use hard objects such as hard As an Energy Star Partner Sanyo cloth or paper Do not use exces a S Manufacturing Corporation has deter siye pressure when cleaning the Cerf TAX mined that this product meets the screen excessive pressure can Energy Star
9. such as my inte Wall Mounting Optional 000 ee 5 grated HD Tuner V Guide control Digital Positioning the LCD HDTV 5 Channels and many more GETTING STARTED Precautions sac ore pd ate odiis ac dp Xa ciel ae 5 INSTALLATION Battery Installation 0 0 c cece eee 5 DETACHING THE TV STAND Antenna Connections to off air or cable 5 Controls and jacks 6 Tools Needed Phillips screwdriver Remote Control Operation 0000 es 7 Important Note Place HDTV face down on a Connections ssssssss e 8 padded or cushioned surface to protect the Power Connection Initial Channel Search 9 screen and finish AV Sra araar EES EEEE ETELE 9 1 Remove the four 4 screws securing the foot ADVANCED AV CONNECTIONS stand CAUTION Hold the stand firmly as HDMI1 2 3 0 eee 10 you remove the last screw save the screws DVI to HDMI 0 c cece cece eee eee 10 for wall mounting Digital Audio EET LB 10 Carefully remove the HDTV stand Audio Out Jacks Fixed Analog 10 ON SCREEN MENU OPERATION Menu Navigation Map cece eens 11 Manual Channel Search 0005 11 Channel Scan Memory Luueesssse 12 Adding Channels to Scan Memory 12 DT Deleting Channels from Scan Memory 12 Digital Caption 0 n cece ee eee 13 Menu Language ccc cece e
10. to select Cable Air Antenna or Digital Add On After the search is complete the HDTV will exit the menu system and return to normal viewing MANUAL CHANNEL SEARCH Cable Air Antenna Digital Add On QO move ENTER EI3HES429 MENU F ya EXIT E24 Manual Search Screen Menu operations continued on page 12 Need help Visit our Web site at WWwW Sanyoctv com or Call 1 800 877 5032 11 This Manual htto www manuallib com file 26891 72 ON SCREEN MENU OPERATION CONTINUED CHANNEL SCAN MEMORY Channel Scan Memory is a database of active channels you scan using the CHANNEL AV keys Customize it by deleting or adding channels Press the MENU key on the remote control to display the Main menu See page 7 Use the CURSOR AV keys to highlight Channel Scan Memory Press ENTER ADDING CHANNELS TO SCAN MEMORY Use the CHANNEL AV or NUMBER keys to select the channel you want to Add NOTE Use the 1 key to select cable channels above 99 Press ENTER to Add the channel to Channel Scan Memory MAIN MENU Channel Scan Memory __DigitalCaption _ Picture Sound Menu Language Energy Saver EXIT PSI STOT ENTER PO MENU CHANNEL SCAN MEMORY Digital Antenna Channel 34 1 Add This Display 0 9 cH 1 CE ENTER COCOR MENU G appears after Digital Antenna Channel 34 1 you press 3 Added ENTER Digital Antenna Channel 34 1 Delete After 3 seconds the TV screen will display
11. DIO REBET CAPTION P 8 This Manual http www manuallib com file 26891 72 Digital Signal Connections Video2 amp Video3 optional Connect Digital devices such as an HD Cable Box HD Satellite Receiver DVD Player and Game System The Component jacks on this HDTV will accept HDTV EDTV and SDTV video signals making Component a great choice when connecting your compatible external devices 1 Connect a COMPONENT cable to a set of Green Blue and Red video jacks Video2 or Video3 on the HDTV and to your digital device as shown Cable is not supplied Connect an AUDIO cable to the matching set of White and Red audio jacks as shown Cable is not supplied Press the INPUT key to step through the signal inputs to select Video 2 or Video 3 DVD PLAYER Need help visit our Web site at WWwW sanyoctv com or Call 1 800 877 5032 GETTING STARTED POWER CONNECTION CHANNEL SEARCH POWER CONNECTION Plug in AC power cord 120V AC 60 Hz Press the POWER key Follow the on screen instructions To 120V AC outlet INITIAL CHANNEL SEARCH Press the CHANNEL A Up key to search for signals connected to the Antenna terminal Channel Search will check for Antenna and Cable signals If Antenna signals are detected the HDTV searches for both analog and digital off air channels If Cable signals are detected the HDTV will search for analog Cable channels Channels are stored in Channel Memory
12. E SOUND MANUALLY 1 Use the CURSOR AY keys to highlight Picture Sound Press ENTER a 2 Use the CURSOR AV keys to highlight Manual Press ENTER PICTURE SOUND Digital Noise Reduction Loud Sound Supressor S DE MEE ENTER PARIE MENU ERE EXIT ESSE O Manual 4 Press the right CURSOR gt key for options Use the AV keys to highlight On or Off Press ENTER e I MEM ENTER PORIE MENU EERE EXIT ET PICTURE SOUND ADJUSTING THE PICTURE SOUND LEVELS Use the CURSOR AY keys to highlight Color Tint Contrast Brightness Sharpness or Tone 4 Use the CURSOR lt gt keys to adjust the levels O Digital Noise Reduction On Digital Noise Reduction Off PICTURE SOUND Color po M e MEE ENTER PORIE MENU Levee EXIT ogg Digital Noise Reduction Loud Sound Supressor SLOG D Adjust MENU E7 EXIT Ez 6 Press EXIT to return to normal TV viewing 16 Need help visit our Web site at www sanyoctv com or Call 1 800 877 5032 This Manual http www manuallib com file 26891 72 HELPFUL HINTS Problems Solutions If you are having problems with your HDTV Before returning your HDTV please visit our check this trouble shooting chart to find one website at www sanyoctv com or call us or more possible solutions toll free at 1 800 877 5032 We can Help Check these Conditions Try these Solutions No picture sound e Check antenna external connections e Adjust antenna Digital Picture e May be station tro
13. NTER FOCE MENU IEEE SE EXIT ESSE D Press the ENTER key to Block or Unblock selected rating A Lock symbol will appear beside the selected rating option indicating that it is blocked The advanced rating table will reflect previous choices you may have made NOTE If the HDTV is reset to factory defaults or if a Manual Cable Search is performed only the Adjust option will appear in the menu The Adjust Advanced option will reappear when the HDTV again detects RRT5 data The V Guide ratings screen below is just an example Actual rating options will vary by region For example the RRT5 ratings for San Francisco California may differ from those in Little Rock Arkansas ADVANCED RATINGS Rating 1 Rating 2 Rating 3 Rating 4 Rating 5 e I MEE ENTER PARSE MENU LEGS EXIT oan HINT There may be more ratings than can be displayed on one screen When vertical scroll bars appear use the CURSOR AV keys to gain access to the additional ratings Need help Visit our Web site at WWW SanyoCtv com or Call 1 800 877 5032 15 ON SCREEN MENU OPERATION CONTINUED PICTURE SOUND ADJUSTMENT ADVANCED PicTURE SOUND ADJUSTMENTS Use the CURSOR AY keys to highlight Digital Noise Reduction Dynamic Contrast or Loud Sound Suppressor Choose Auto to accept predetermined values for each parameter Choose Manual to adjust Picture Sound values individually to suit your personal preferences PICTURE SOUND ADJUSTING THE PICTUR
14. SANYO DP42848 DP46848 user manual http www manuallib com file 26891 72 From ManualLib com ManualLib com collects and classifies the global product instrunction manuals to help users access anytime and anywhere helping users make better use of products Home http www manuallib com Chinese http www shuomingshuku com SANYO Model Nos DP42848 Nos de Modelo ENGLISH N de modele D P46848 LCD HDTV Owner s Manual Table of Contents 4 ESPANOL TV de LCD HDTV Manual de Instrucciones Contenido 21 FRANCAIS TVHD ACL Manuel d instructions Table des matieres 37 Welcome to the World of Sanyo Need assistance Thank you for purchasing this Sanyo LCD High Definition Visit our Web site at Digital Television You made an excellent choice for www sanyoctv com Performance Reliability Features Value and Styling or call toll free 1 800 877 5032 We can Help Printed in Mexico SMC February 2008 Impreso en M xico SMC febrero 2008 Imprim aux Mexique SMC f vrier 2008 2008 Sanyo Manufacturing Corporation Part No No de Parte N de piece 19C6P1P0303 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SER VICE PERSONNEL THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN
15. THIS UNIT THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE IMPORTANT SAFETY INSTRUCTIONS Important Safety Instructions for LCD HDTV 1 Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings a GH O1 4 GW N 10 11 12 13 14 2 This Manual Read these instructions Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit fully into your outlet consult an electri cian for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the c
16. amming RESET twice to clear all settings and e Weak Signal restart channel search e Turn antenna install signal booster No Cable channels e Cable Channel Indicator C should e Search for Cable channels using Manual above number 13 appear next to channel number Channel Search Remote Control e Check batteries e Replace batteries B 7 9 will not operate TV e Check if TV is plugged in e Aim remote control at front of TV r tr Cabinet makes e This is a normal condition during popping sound warm up and cool down of the plastic cabinet parts Need help Visit our Web site at WWW SanyoCtv com or Call 1 800 877 5032 17 This Manual htto www manuallib com file 26891 72 ONE YEAR LIMITED PARTS AND LABOR WARRANTY THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE UNITED STATES OF AMERICA CANADA AND PUERTO RICO EXCLUDING ALL OTHER U S TERRITORIES AND PROTECTORATES THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES WARRANTY APPLICATION FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing Corporation SMC warrants this TV to be free from manufacturing defects in materials and workmanship under normal use and conditions for parts and labor For the FIRST 90 DAYS from the date of original retail purchase Sanyo Manufacturing Corporation will replace any defective TV via e
17. and can be scanned using the CHANNEL A Up and V Down keys If no Antenna signals are detected the HDTV will begin an AV search If neither of these searches detected a valid signal the HDTV will tune to input Video1 INITIAL DISPLAY Need help visit our Web site at WWw sanyoctv com or Call 1 800 877 5032 ALL CHANNEL SEARCH Return to search MENU POWER Power Off CHANNEL SEARCH DISPLAY AV SEARCH NOTE Be sure all the external video devices you con nected to the HDTV are powered ON before you begin an AV Search Press the CHANNEL V Down key to search for signals from devices you con nected to the AV input jacks Initial Display AV Search will begin checking the AV inputs for valid signals beginning with input Video When a valid signal is detected the search process ends and the HDTV tunes to that input source If a valid signal is not detected on any of the AV inputs the HDTV will tune to input Videol AV SIGNAL SEARCH DISPLAY 9 ADVANCED AV CONNECTIONS ADVANCED DIGITAL SIGNAL CONNECTIONS HDMI TO HDMI Connect compatible Digital devices such as an HD Cable Box HD Satellite Receiver DVD Player and Game System HDMI High Definition Multimedia Interface An all digital AV interface that accepts uncom pressed video signals for the very best picture possible It supports HDCP copy protection allowing transmission of copy protected digi tal content The signal can also includ
18. art stand tripod bracket or table specified by the man ufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus com bination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 16 If an outside antenna is connected to the television equipment be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges In the U S Selection 810 21 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding elec trodes and requirements for the grounding electrodes An outside antenna system should not be located in the vicinity of overhead power lines or other electrical light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to
19. at WWwW Sanyoctv com or Call 1 800 877 5032 13 This Manual http www manuallib com file 26891 72 ON SCREEN MENU OPERATION CONTINUED V GUIDE PARENTAL CONTROL NOTE THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF AMERICA S FCC V CHIP REGULATIONS THEREFORE IT MAY NOT FUNCTION WITH BROADCASTS THAT ORIGINATE IN OTHER COUNTRIES This Sanyo television is equipped with an elec tronic V Chip to interpret MPAA Motion Picture Association of America and TV Parental Guidelines rating codes When these codes are detected the DTV will automatically display or block the program depending upon choices you make when setting up the V Guide system Use this feature to automatically block programs with content you deem as inappropriate for your children to view MORE INFORMATION Additional information about MPAA and V Chip rating can be found at www mpaa org and www v chip org respectively V GUIDE OPERATION 1 Use the CURSOR AV keys to highlight V Guide in the Main menu Press ENTER 2 Use the CURSOR AV keys to highlight On in the V Guide menu Press ENTER 3 Use the CURSOR AV keys to highlight Adjust Press ENTER V GUIDE ce ENTER EIE MENU ESTE EXIT foo Use the CURSOR AV and lt gt keys to select MOVIE TV or Content Ratings NOTE Content ratings are under the letters FV D L S and V D Press the ENTER key to Block or Unblock selected rating A lock symbol will appear beside the sel
20. e Dolby Digital or PCM audio when available Connect an HDMI cable to one of the HDTV s HDMI inputs and to your external device Cable is not supplied NOTE Press the INPUT key to step through the signal inputs to select HDMI 1 HDMI 2 or HDMI 3 DVI TO HDMI Use an adapter not supplied to connect a DVI device to an HDMI input jack Connect the device s audio out to the VIDEO3 Audio In L R NOTE Audio is available only when using HDMI1 DVD PLAYER SATELLITE RECEIVER BACK VIEW OF HDTV 10 This Manual http www manuallib com file 26891 72 DIGITAL AUDIO Connect the HDTV Digital Audio Output to a Multichannel Receiver as shown NOTE Dolby Digital 5 1 audio is available at the Digital Audio Output only when received as part of a Digital Antenna signal being viewed on the screen PHONO TYPE DIGITAL AUDIO CABLE Not supplied LEFT SIDE MULTICHANNEL VIEW OF RECEIVER HDTV BACK AUDIO OUT JACKS FIXED ANALOG Connect the HDTV Audio Out jacks to a Stereo Amplifier as shown NOTE Do not connect external speakers directly to the HDTV BACK VIEW OF HDTV STEREO AMPLIFIER Need help visit our Web site at WWwW sanyoctv com or Call 1 800 877 5032 ON SCREEN MENU OPERATION MENU NAVIGATION MAP MAIN MENU SUB MENU OPTIONS NOTE Not available will appear on the screen when an option is unavailable TUNING MODE UNAVAILABLE MENU OPTION S Analog RF Digital Caption Digi
21. ected rating option indicating that it is blocked OPERATING TIPS E V Guide settings are effective for Analog channels Digital channels and Video1 signals MYou can block portions of a TV rating by choosing one or more of the Content ratings D L S and V By blocking just the L and S content ratings of TV 14 for example TV 14 rated programs with a D and or V content rat ing could still be viewed STANDARD V GUIDE RATINGS AT A GLANCE MPAA Movie RATING TV RATING CONTENT RATING BLOCKED RATINGS Lock symbol 14 Need help visit our Web site at www sanyoctv com or Call 1 800 877 5032 REGIONAL V GUIDE RATINGS ADVANCED V Chip Regional Ratings 5 RRT5 is an advanced V Chip ratings system for digital channels that are received with an antenna Your new Sanyo HDTV supports this alternative system When the HDTV detects compatible RRT5 data it is downloaded and stored in memory and the menu is modified to include an advanced adjust ment option When the Adjust Advanced setup option is selected the Advanced Rating screen appears 1 Use the CURSOR AV keys to highlight V Guide in the Main menu Press ENTER Use the CURSOR AV keys to highlight On in the V Guide control menu Press ENTER Use the CURSOR AV keys to highlight Adjust Advanced Press ENTER Use the CURSOR AV and lt gt keys to select a rating e W N ADVANCED RATINGS Humor Scare Sexual Dimension 4 Dimension 5 Owove E
22. ee eee es 13 Energy power Saver ccc cece eee 13 V Guide Parental Control V Guide Operation Standard 14 V Guide Operation Advanced 15 Picture Sound Adjustment DP46848 Adjusting the Picture Sound Manually 16 Advanced Picture Sound Adjustments 16 HELPFUL HINTS Problems Solutions 17 WARRANTY 0 ccceeeee HH 18 4 Need help visit our Web site at WWW SanyoCctv com or Call 1 800 877 5032 WALL MOUNTING OPTIONAL Use the screws you removed when dettaching the stand to secure the HDTV to a wall mounting kit NOTE Wall Mounting kit is not supplied VESA standard interface 400 x 400 Mounting screws measurements M6 Diameter Length 12mm min 16mm max Wall Mounting Inserts POSITIONING THE LCD HDTV A Always use a firm flat surface when posi tioning your HDTV Do not position the unit in a confined area Allow adequate space for proper ventilation 41 3 DP42848 DP46848 MM EM Y MM n M a M n M en j I lt lt T 23 _ 22 5 NOTE All dimensions are in inches GETTING STARTED 1 Install supplied batteries in the Remote 2 AAA eneloop Ni MH rechargeable batteries Ad Precautions Do not use rechargeables together with dry cells other types mixed new and old or batteries with different charge levels Do not expose the Remote or batteries to moisture or heat
23. keep from touching such power lines or circuits as contact with them might be fatal EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL ELECTRICAL CODE ANSI NFPA 70 POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H GROUND CLAMPS GROUNDING CONDUCTORS NEC SECTION 610 21 NEC NATIONAL ELECTRICAL CODE Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the build ing as close to the point of cable entry as practical 17 18 19 Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus When the MAINS plug is used as the disconnect device the disconnect device shall remain readily operable Need help visit our Web site at WWW SanyoCtv com or Call 1 800 877 5032 http www manuallib com file 26891 72 FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device pur suant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential
24. o Output to an advanced stereo home theater system equipped with Dolby Digital 5 1 Component Video Input VIDEO2 or VIDEO3 PAGE 8 Connect digital video equipment to the Video Green Y Blue Pb Red Pr jacks and matching Audio White L and Red R jacks These jacks will automatically detect the type of signal being received 4 Analog Audio Out L R Jacks PAGE 10 Connect stereo audio equipment to these jacks 5 Analog Digital Antenna Input PAGE 5 6 Connect an RF antenna or Analog Cable sys tem to this jack LEFT SIDE PANEL 6 AV Input VIDEO1 PAGE 8 Connect analog video equipment here 7 HDMI Input INPUT 1 2 or 3 PAGE 10 An all digital AV interface that accepts 1080p uncompressed video signals for the very best picture possible HDMI supports HDCP copy protection allowing transmission of copy protected digital content The signal can also include Dolby Digital or PCM audio when available Need help visit our Web site at WWwW sanyoctv com or Call 1 800 877 5032 This Manual http www manuallib com file 26891 72 REMOTE CONTROL OPERATION D PIX Shape Key Press to choose between options Pix1 Pix4 Available options depend on the signal and the broadcast s aspect ratio 2 Input Key Press to select the source to view Analog RF Digital RF Video 1 Video 2 Video 3 HDMI 1 HDMI 2 or HDMI 3 3 Info Key Press to display Channel Banner information
25. tal RF None all Menu options available Video 1 Manual Channel Search Channel Scan Memory Digital Caption Manual Channel Search Channel Scan Memory Digital Caption V Guide Video 2 3 and HDMI 1 2 3 IMPORTANT FACT This HDTV maintains only one data base of digital channels Therefore when you search for cable channels the database of antenna digital channels will be deleted You will only be able to receive those ClearQAM channels your cable company provides MANUAL CHANNEL SEARCH MANUAL CHANNEL SEARCH HAS THREE CATEGORIES e Cable Air Antenna Digital Add On Cable Search looks for analog cable channels and unscrambled ClearOAM digital cable channels This search may take several minutes After the search is complete the HDTV will tune to the low est ClearOAM channel if available Otherwise the HDTV will tune to the lowest analog cable channel Air Antenna Search will search for analog and digital channels that are broadcast over the air After the search is complete the HDTV will tune to the lowest Digital channel or the lowest analog channel If no digital or analog channels were found the HDTV will tune to Video 1 Digital Add On Search adds any new digital chan nels that are found to the Channel Scan Database 1 Press the MENU key on the remote control to display the Main menu See page 7 2 Use the CURSOR AV keys to highlight Manual Channel Search Press ENTER 3 Use the CURSOR AV keys
26. uble NO signal e Try a different channel broadcast e Press RESET twice to restart channel e MUTE function may be ON search All customized settings will be cancelled e Adjust Volume No Captioning e Check if station is broadcasting a e Press CAPTION to select Closed Caption signal captioning mode e Select another channel Cannot customize e Digital Caption signal is not being e Press CAPTION to select Analog Caption broadcast captioning Cannot display pic e Press PIX SHAPE to change ture on a full screen setting Poor Picture Sound e Check if program is in color e ry a different channel watching Analog Check antenna external connections e Adjust antenna e Color or Tint misadjusted e Press RESET twice to restart channel e May be station trouble search e Maybe MUTE function is ON e Adjust Volume No Signal e Check Audio Video connections e Press INPUT message appears Check external equipment e Switch on external equipment on Screen connections e Turn antenna install signal booster e Check external equipment setting e Set external equipment output e Check antenna connection connections to match input connections Cannot select or e Channel may be removed from memory e Select Channel Scan Memoryto add scan some channels e Check antenna connections channels or start channel search e No digital signal being broadcast e Set V Guide to ALLOW ALL or press e V Guide is set to block progr
27. xchange atthe retailer To ensure proper warranty application keep the original dated sales receipt for evidence of purchase Return the defective TV to the retailer along with the receipt and the included accessories such as the remote control The defective TV will be exchanged for the same model or a replacement model of equal value if necessary Replacement model will be contingent on availability and at the sole discretion of Sanyo Manufacturing Corporation THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OBLIGATIONS For one year from the date of purchase Sanyo Manufacturing Corporation warrants this product to be free from defects in material and workmanship under normal use and conditions During the first 90 days under this warranty for any manufacturing defect or malfunction Sanyo Manufacturing Corporation will provide a new TV via exchange at the retailer HOW TO MAKE A CLAIM UNDER THIS WARRANTY Please call 1 800 877 5032 Please be prepared to give us the television s model number and serial number when you call The model number and serial number are printed on a label attached to the back of the unit For customer assistance call toll free 1 800 877 5032 Weekdays 7 30 AM 7 00 PM Central Time Saturday 7 30 AM 4 00 PM Central Time This warranty expresses specific contractual rights retail purchasers may have additional statutory rights which vary
Download Pdf Manuals
Related Search