GSM Control Card User Manual
Contents
1. LED display short message control card user manual LED display short message control card 1 The storage capacity for 50 short messages Monochromatic can drive the screen area 64x768 16 1536 32 1536 48 1024 Double color can drive the screen area 16 768 32x768 48x512 64 384 2 Each message 300 characters long including the system instruction long is automatically deleted exceeding part Description SMS control card power up before insertion of mobile phone SIM card prohibit live insertion In power need to initialize so a power not to immediately send messages in the past to Net lights flash once every 2s 3s connect the network successfully can send a message Control card for all received information do cryptographic instruction format verification rejected substandard instruction to filter junk information SMS card English send instruction format Specific English instruction format send Send to display data adjust For correcting time Del Delete control card on page display information Delall Delete all contents of the display control card Trust Setting a trusted number this function can be used for receiving meteorological information Count Display countdown show a 1 9 W Temp Display temperature Para Setting display parameters Power The setting of the timing switch screen Instruction please refer to the following examples Parameters please refer to t2. Nine zoning 6 9 Tt In 1 the short message control card support upper and lower partition partition partition way around 2 Through the computer software to set display If set to display A from trusted number information B countdown information C time program D temperature and humidity program In the District 1 screen with the left partition partition or screen display cycle Non trusted number sent the information if not specified partition in the partition 2 shows if the specified partition partition 1 display at 2 if you need to set up a trust number sent the information in the partition 1 shows in the parameter after As follows Send parameters message content For example Send0121 work happily Send0229310 work happily Send0121 work happily Or send0121 work happily Or send0121 work happily Note modify screen reference needed PC end software reset partition information Ten setting the switch screen commands Power boot time shutdown time Switch machine time format for the hhmmhhmm In front of the HHMM boot time behind the HHMM shutdown time Such as Power08001900 said display screen starting up time is 08 00 the shutdown time of 19 00 SS 7 9 We If you want to cancel the function it sends the Power Eleven the temperature and humidity program instruction Tempnn The NN value of 01 indicates adding humidity program 00 to dele
3. 0 8 Parameter 3 mobile speed 1 9 speed value is greater faster Parameter 4 the residence time value in the range 1 9 Parameter 5 text display color 1 3 1 red 2 green 3 yellow Parameter 6 surround border 0 6 0 indicates no surround frame Example send0225310 work happily Explanation send is to send commands send information stored in said box No 02 left shows moving at a velocity of 5 residence time of 3 seconds the text color to red no surround border information content for happy work Three automatic calibration instruction adjust m nn By sending short message to display the time correction time 3 9 Tt The command message carried time modify screen time M for the selection of the time display mode value of 0 3 In 1 0 shows the default mode display year month day time minutes and seconds week Such as 2011 10 24 12 30 30 Monday In 2 1 years months days display such as 2011 10 24 second 12 30 30 In 3 2 year month date display such as 2011 10 24 Monday week 4 3 points second display such as 12 30 30 An example ad justmnn M for the selection of the time display mode value 0 3 when NN is 00 to hide the time program when NN 01 show time show Note m Province province after the display as the default mode When the control card partition time program will be fixed in the first partition Four deleting a single information instruc
4. all the 32 dot matrix font Control card has been embedded in the 3 font The default system is based on the screen to select appropriate font height 8 9 Tt Font with special symbols to indicate the number of said 16 dot matrix font said 24 dot matrix font said 32 dot matrix font Different numbers symbols in instruction can select a different font Set font if not be divisible by the screen control card according to screen high intelligent processing For example if the current screen high was 16 points if the call to the 24 dot matrix font control card will determine the setting is unreasonable will automatically adjust to call 16 dot matrix font For example Send0121 work happily The content will be the 16 high display Send0121 work happily The content will be the 24 high display Send0121 work happily The content will be the 32high display i 9 9 Tt
5. he following examples Data please refer to the following examples Each command parameter of explanation One Screen for setting parameter first use SMS card users recommend the use of LED display control software set can also refer to the sixth page settings screen reference instruction instance Two sending the information content of instruction Short instruction format Send parameter 1 parameter 2 parameter 3 message content Parameter 1 is the message storage location range 01 50 Note for the time being only 01 50 Parameter 2 display mode value in the range 0 8 0 Continuous shift left l 1 immediate display 2 shift left 3 the right 4 up Ss 2 9 W 5 down 6 Zola curtain 7 the drop curtain 8 right curtain Parameter 3 the residence time value in the range 1 9 For example send0121 work happily Explanation send is to send commands send information stored in said box No 01 left shows the residence time for 1 second information content is happy work Command format If you need to have the text color surround the frame parameters can refer to the following to send mode Send parameter 1 parameter 2 parameter of3 parameter 4 parameter 5 parameter 6 parameter information content Parameter 1 is the message storage location range 01 50 Note for the time being only 01 250M Parameter 2 display mode value in the range
6. high 32 points GGG should be expressed as 004 maximum 008 Note screen parameter conversion rules to the actual number is divided by 8 such as screen high 256 points in addition to 8 is equal to 32 the 032 S representing the display is a monochrome screen or double color screen color screen for the 0 double color 1 D data polarity 0 negative 1 positive E OE polarity 0 negative 1 positive M scan mode 1 1 16 scan straight walking the line a data line with 16 2 0 8 scan do not discount together with 8 rows of data 3 1 8 scan every 8 points down on a road with 16 lines a data 4 2 8 scan for every 8 points to break a a road with 16 rows of data 5 1 4 scan four sweeping downlink 1 16 04 P16 08 6 1 4 scan four sweeping downlink 1 8 04 P08 08 7 1 4 scan every 8 points of discount row reverse column is 8 116 8 1 4 scan four sweeping downlink 1 8 04 P16 08 9 1 4 scan four sweeping downlink 1 8 04 P16 08 no 138 if the conventional P10 screen scanning mode choose 5 For example the screen is 32 points 128 points wide P10 half door screen then set the screen parameter information should be edited as follows Para016 004 0015 Note this command each digital between all the spaces the use must be in accordance with this format or the control card rejected substandard instruction If the scan mode beyond this range use the PC software to set
7. ruction format test i e the number sent by any formatting information will be displayed The number sent the instructions will be invalid To cancel a trusted number is sent please pay attention to Trust not trusted number of mobile phone number sent the order Seven to show the countdown program instruction Count time text The target time it consists of 6 digits year month day respectively occupies 2 digits years before the 2 omitted Caption by the user to determine but which must contain special characters C C is not case sensitive For example Count080808 and C days from Beijing Olympic games Said target time is 2008 08 month 08 days And the screen will display the following content from the Beijing Olympics and XXX day When the control card partition countdown program will be fixed in the first partition If the customer often need to change information we recommend to use China Mobile Fetion software to send text messages sending information to zero cost simple and convenient Eight set the screen reference instruction Parakkk ggg sdem 5 9 Wt KKK set the display width with 8 as a base KKK represents the display width number less than 3 bits with 0 complement If the display width of 128 points KKK said 016 maximum 128 GGG setting the height of the display screen with 8 as a base GGG represents the display high points less than 3 bits with O0 complement If the screen is
8. te the temperature and humidity program Note to display temperature and humidity programs need to add temperature and humidity sensors temperature and humidity can be displayed correctly When the control card partition temperature and humidity program will be fixed in the first partition The remarks section 1 special tips if it is to use software to send text messages please ensure that the user s nickname is not named SMS screen because of the Fetion Fetion users send SMS platform the nickname will be included in the message sent together This causes the control card users will be the nickname mistakenly believe that the password which leads to the short message format error 2 common errors When sending an instruction in the process if the screen appears instruction format error tips please confirm the following 2 points A Instructions format is in accordance with the requirements of writing B control card beside if there is strong affect the communication interference source 3 font and the partition function of the extended instruction Only support left and upper and lower partition method The send parameter 1 Parameter 2 parameter 3 message content Everything within the parentheses are optional Expressed the hope that the program to call the 16 dot matrix font Expressed the hope that the program to call the 24 dot matrix font Expressed the hope that the program to c
9. tion Delnn Examples Del01 said delete stored at 01 locations on the information Five delete all the information and instructions Delall Six setting up the trust number instruction Trust name trust number Trusting numbers sent any information such as the weather forecast are placed in the 01 position the left shift display Set trusted number sent the information on the display screen of the display font size font size for a byte value as follows 0 16 lattice 1 24 lattice 2 32 lattice Can set up 1 trusted number is arranged behind the trust number would have set the trust number cover E 4 9 WL For example to display a weather forecast can be the first to use mobile phone extraction meteorological short message number remove the previous 86 and then Trust behind the input at Example Trust012520 Explanation set 12520 as the trusted number then the number issued to any text messages are not the cryptographic instruction format verification and displayed to the screen and the font size of 16 dot matrix display Note if only send a Trust five words said cancel cancel trust trust number number at the same time the original trust number transmitted information will also be empty Note 1 if the trust number from Fetion users please in the mobile phone number before the 12520 2 once a certain number is set to a trusted number control card not the number sent the information inst
Download Pdf Manuals
Related Search