Untitled - Security Camera Systems
Contents
1. MINI IR SPEED DOME CAMERA User Manual ud WARNINGS AND CAUTIONS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE DO NOT INSERT ANY METALLIC OBJECTS THROUGH VENTILATION GRILLS OR OPENINGS ON THE EQUIPMENT CAUTION EXPLANATION OF GRAPHICAL SYMBOLS The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user the presence of non insulated dangerous voltage within the product s enclosure that maybe of sufficient magnitude to constitute a risk of electric shock to different persons The exclamation point within an equilateral triangle is intended to alert the user the presence of important operating and maintenance servicing instructions in the literature accompanying this product PRECAUTIONS Persons without technical qualifications should not attempt to operate this dome device before reading this manual thoroughly Remove any power to the dome before attempting any operations or adjustments inside the dome cover to avoid potential damage to the mechanism Inside the dome cover there are precision optical and electrical devices Heavy pressure shock and other sudden adjustments or operations should be avoided Otherwise you may cause irreparable damage to the product Please DO NOT remove or disassemble any internal parts of the video camera to avoid normal operation and possibly void the warrant2. MINI IR SPEED DOME CAMERA Note Specifications subject to change without notice All rights reserved V MZ1 01 30
3. Refer all servicing to qualified service personnel Servicing is required when the device has been damaged in any way when liquid traces are present or the presence of loose objects is evident or if the device does not function properly or has received sever impact or has been dropped accidentally 11 Indoor dome is for indoor use only and not suitable for outdoor or high humidity locations Do not use this product under circumstances exceeding specified temperature and humidity ratings 12 Avoid pointing the camera directly to the sun other extremely bright objects for prolonged period of time avoiding the risk of permanent damages to the imaging sensor 13 The attached instructions are for use by qualified personnel only To reduce the risks of electric shock do not perform any servicing other than contained in the operating instructions unless you are qualified to do so 14 During usage user should abide by all electrical safety standards and adhere to electrical specifications for the operation of the dome The control cable for RS485 communications as well as the video signal cables should be isolated from high voltage equipment and or high voltage cables 15 Use supplied power supply transformer only Table of Contents PACKAGE 0 1 2 SPECIFICATION AND OUTLINE eere 2 2 JI ela bed 2 2 2 Outline uias UR HERR 3 3 INSTALLATI
4. area it will wash out to white the camera will adjust the iris so 9 that the target in the sensitive area will properly exposed Call preset 86 to enable the BLC call preset 87 to disable the BLC Remark BLC is only available for the camera module which support this function 4 18 Auto flip In the manual tracking mode when a target goes directly beneath the dome the dome will automatically rotate 180 degree in horizontal direction to maintain continuity tracking When the dome flips the camera starts moving upward as long as you hold the joystick in the down position this function can realized by image center flip dependant on different camera modules the feature can enable or disable through OSD menu 5 Power up action lt SYSTEM gt lt SYSTEM gt MFG MFG PROTOCOL AUTO PROTOCOL AUTO DOME ID 001 DOME ID 001 COMM 2400 N 8 1 COMM 2400 N 8 1 VERSION MZ1 01 VERSION MZ1 01 DETECTING PAN XXX TILT XXX Power up self testing Power up self completion After power up self testing completion the system auto detect if the dome address and the communication is match the equipment If not the system information will display the corresponding information Communication includes the RS485 detection show Comm is wrong please check if the RS485 cable is reversed or disconnected or the baud rate is not match the controlled equipment 10 6 OSD 6 1 Instruction Call preset 95 to enter the OSD call preset 94 to
5. ee E E T HER RE HET 18 6 5 4 A B sCans is oH Rep dem aped 19 6 5 5 Pan scan sooo oa eR die 20 6 5 6 Parka COD 21 6 5 7 Privacy ZONE isses ie 22 659 8 Advanced xa oem eem RD eo ES 23 6 5 9 Display ioa 24 6 6 Cameras hrs nl rannte Bis Bis 25 6 7 Language RE 27 6 8 Reset nur e Hte netten 27 7 SHORT CUTS COMMEND eee neret 28 8 TROUBLE SHOOTING essere 29 1 PACKAGE CONTENTS Mini speed dome Ceiling mount Power supply Screws kits User manual 2 SPECIFICATION AND OUTLINE 2 1 Specification Pan Rotation Speed 0 1 50 s Pan Rotation Range 360 Tilt Rotation Range 94 Auto Flip Horizontal 180 Vertical 90 Auto control IR LED PWM A B Scan User programmable A B Scan Speed 01 64 grade selectable Dwell Preset 05 60s Preset Points 128 Guard Tours 3 groups Guard Points Max 16 points dwell time user selectable 02 605 Park Action Home position Pan scan A B scan guard tour 1 3 Part Time 1 60mins available PWR on Action Memory as power off Pan scan A B scan guard tour 3 Ambient detection Support IR Illumination On 1 15 grades selectable Protocol Pelco D Pelco P Communication RS485 Baud Rate 1200 2400 4800 9600bps Operating Temperature Indoor 0 40 Operating humidity lt 95 Non Condensing Heater amp Blower Auto t
6. 96 Guard tour 3 83 Switch to day 97 Guard tour 2 86 BLC on 98 Guard tour 1 87 BLC off 99 Pan scan 28 8 TROUBLE SHOOTING Problem Description After power is applied there is no motion self test and no video image Self test is normal but cannot control dome Noise after self testing Image is not stable Image is blur Control to the dome is not smooth Possible Reason Trouble shooting Cable harness is Verify that the orientation of improperly connected the connector input Input power voltage is too Verify the voltage of the low input power Power supply is not work Change a new power supply Set the correct protocol baud rate and address of dome device Verify the polarity of the RS485 connection as per the instruction manual Mechanical obstruction Verify and correct it Camera module is no Change the corre power Wrong communication settings Improper connection of control cable polarity Check the power supply make P sure the power input is DC 12V Video cable is improperly Verify the contact of the video contact Camera is on manual Change to auto focus focus The lens is dusted Clean the lens Change the DC 12V Power Communication distance Make sure the distance is in the is too long allowed range make the 5485 is properly RS485 cable is not contact properly contact Make sure the connected dome connected is in the allowed quantit
7. ACTION gt lt SETTING gt PARK MODE OFF PARK TIME 01 lt SETTING gt RUNNING PRESET 1 SAVE AND BACK DELETE PRESET 2 BACK LAST MENU EXIT Fig 6 4 8 1 Fig 6 4 8 2 Park mode Park mode includes off home position scan Pan scan guard tourl guard tour2 guard tour3 When park mode is OFF status the dome doesn t run park mode after exiting the menu When park mode is other status the dome will run park mode automatically after exiting the menu and no any operations in the specified park time 21 Park time Park time is 1 to 60 min selectable default is 1 min If there is no any operation to the dome within the time the dome will execute the park action Home position setting After enter the OSD menu as 6 4 8 2 Move to the desired position save the setting Running Running the park action if there is no setting system will remind please set park action Delete Delete the setting 6 5 7 Privacy zone lt PRIVACY ZONE gt MASK NO 01 MASK OFF lt SETTING gt RUNNING DELETE EXIT Mask No Mask No is depend the number of the module support it is from 1 to 24 default is 1 22 Mask Mask is on and off selectable default is off lt Setting gt 1 Move the up down key to the mask select left or right key to enter the mode 2 Set the mask No use left key to ext 3 Turn on mask 4 enter setting use Iris open Iris close to enlarge or reduce the
8. ON 3 3 1 Installation of camera module or CCD and 3 3 2 Installation of the 4 3 3 Recommend installed position 5 3 4 Connections 6 A FUNCTIONS asian NE 6 4 1 Communlcation ein Pme n medie 6 42 08D xat ned 6 4 3 IR output amp standby power consumption adjustable 6 4 4 IR detection time and standby time adjustable 7 4 5 Auto adaptive to protocol and module 7 4 6 Day night Switch aoc one HR RTI 7 4 7 Speed ration sss eene nennen nennen 7 4 8 A B SCAM d edet aid Hn 7 4 0 Pan 7 4 10 7 A 3 Bark actions eae 9 4 14 Zero alignment 9 4 15 Manual Tracking essere 9 4 10 FOCUS RR RE NEUE 9 5 POWER UP sese nnne nnne nnns 10 OOS Dine eh cients Raed cheese AS P e e E 11 Gell T SCEUCHODA nee 6 2 OSD 12 6 3 MAI Meni 13 6 4 System information sse 13 6 35 MDrU I singe ne RN 14 6 5 1 Communication Hann 14 6 52 IR diSpl y insedit o b eed 16 6 5 3 GUAE uoo o
9. PLAY gt lt GUARD TOURS gt lt A B SCAN gt lt PAN SCAN gt lt PARK ACTION gt lt PRIVACY ZONE gt lt DISPLAY gt lt ADVANCED gt EXIT 6 5 1 Communication This product has no hardware DIP You can change the communication ID Baud rate Soft protocol via OSD menu directly Method of changing COMM Enter MAIN DOME gt COMM lt COMM gt DEVICE ID ID 0000 T TARGET ID 001 SOFT PROTOCOL AUTO BAUD RATE 2400BPS COMM RESET gt SAVE EXIT As left figure enter OSD lt gt then the cursor gt will select CHECK ID automatically Control the joystick to the right to change the CHECK ID when the cursor will change to Ox and will appear to below the top bit at the same time This moment you can control the joystick to up and down to change the ID bits to make it comply with the DEVICE ID After the system will have detected automatically that the DEVICE ID complys with the CHECK ID the COMM can be changed 14 COMM instruction COMM RESET gt lt COMM gt CD CD gf GD D ED DEVICE ID COMM RESET BELOW CHECK ID 0000 TARGET ID 001 PROTOCL AUTO TARGET ID 001 COMM 2400 SOFT PROTOCOL AUTO BAUD RATE 2400BPS lt COMM RESET gt YES EXIT SAVE EXIT Fig 6 5 1 1 Fig 6 5 1 2 DEVICE ID It is only and used to distinct from the ID of other domes CHECK ID Distinguis
10. d information through the OSD 4 3 IR output amp standby power consumption adjustable User can adjust the IR output consumption when the dome is on max time zoom User can adjust the standby consumption when the dome is set on idle time though the OSD 4 4 IR detection time and standby time adjustable User can adjust the IR on off time after detection of day night mode though the OSD User can adjust the IR standby time 15 305 selectable though the OSD 4 5 Auto adaptive to protocol and module The dome can auto adaptive to the multi protocol and most of the module eg Sony CNB LG Samsung etc without changing the DIP switch 4 6 Day night switch The dome is with auto day night function when the illumination is low the picture will auto switch from day to night mode when the illumination is high enough the picture will auto switch from night to day mode 4 7 Speed ration Intelligent pan and tilt speed is variable dependant the zoom factor when zooming in the speed will become slow when zoom out the speed will become quicker 4 8 A B scan User can set A B scan through the OSD the available preset point for A B point is from 1 64 preset scan speed is 15 64 grade selectable Call preset 92 to enable the A B scan 4 9 Pan scan User can set Pan scan through the OSD scan speed is 02 64 grade selectable Tilt degree is 0 90 available Call preset 99 to enable the Pan scan To exit from the scan mode move th
11. e joystick 4 10 Preset Each of user definable preset can be programmed to use pan tilt camera setting and other setting when preset is called the dome will automatically move to the defined position the user is allowed to add modify delete and 7 call preset total 128 preset point 0 is not valid preset point Set call delete preset Set Move the dome to the defined position and the press Preset on the controller and then input the number and press enter for confirmation Delete Press CLEAR key on the controller then input the number of the preset and press enter for confirmation Remark 1 The definition of the different protocol for the preset maybe different 2 After set the preset user can move the dome and then call the preset to verify the preset point 3 The commend maybe different according to different control equipment 4 11 Guard tour The dome provide 3 guard tours in each tour user is allowed to specify the scanning track by a group of user defined preset with scanning speed between two presets and the dwell time at the preset separately programmable each tour support max 8 preset point dwell time is from 2 60s selectable speed is from 1 64 grade Setting Set the preset point in the guard tour Tour 1 Call preset 98 to enable the 1 tour preset allowed to use is 1 8 default dwell time is 6s Tour 2 Call preset 97 to enable the 2 tour preset allowed to use is 9 16 default dw
12. ell time is 6s Tour 3 Call preset 96 to enable the 3rd tour preset allowed to use is 17 24 default dwell time is 6s Remark During the guard tour if any commend to the dome it will exit from the tour 4 12 Power up memory This feature is allowed the dome to resume its previous preset or status after power is restored by default setting the dome is support power up memory 4 13 Park action This feature allowed the dome to begin a specified operation after a programmed time of inactivity Programmed time is selectable user can enable or disable this feature from the OSD Call 220 to enable this feature or use the keyboard or OSD to set delete enable 4 14 Zero alignment There is a point specified as zero point when the dome is working the preset point is not accurate cause by the operator user can call preset 34 the dome will automatically enable the zero alignment 4 15 Manual Tracking User can use the control equipment to control the dome zooming in or zooming out or pan tilt to track the target 4 16 Focus The auto focus enables the camera to focus automatically to maintain clear image User can use manual focus to in special condition 4 17 BLC If a bright backlight is present the target in the picture may appear dark or as a silhouette BLC enhance the target in the center of the picture the dome uses the center of the pictures to adjust the iris if there is a bright light source outside this
13. emperature control Power DC12 lt 3A IR Illumination Distance up to 50 meters Power Consumption lt 20W Lightning protection transient voltage 3000V Compatible camera SONY LG CNB SAMSUMG HITACHI LED Angle of Illumination 016 2 2 2 Outline TOP VIEW FRONT VIEW SIDE VIEW 128 00mm 10 00mm 104 00mm CEILING MOUNT 3 INSTALLATION 3 1 Installation of camera module or CCD and lens 10 12 X Camera Camera module CCD Hens 3 2 Installation of the dome SS 5 N Rotate 1 Use screws to fixed mounting plate in the appropriated position of wall 2 Buckle up the mini dome on the two buckles of mounting plate 3 Rotate the mini dome 4 Check up whether the dome installed properly HE RW 3 4 Connection Please disconnect all the power and read the user manual thoroughly before connection the dome Power 12VDC Power supply 12V DC pply f am Monitor Video cable ET M D ELLIDBES Controlled equipment N RS485A B cable Fig 24 4 Functions 4 1 Communication The dome is compatible with Pelco D Pelco P protocol etc user can set the dome address Baud rate protocol by DIP switch or though the OSD menu 4 2 OSD The language use for on screen menu the available language is English etc User can set the function or parameter or check the relate
14. er is 100 IR standby power is 60 standby time is 15s in the day time if the working mode is black the output power is 100 within 15s if no operation to the dome the IR output power will automatically change to 60 if change the model to auto after 8s the picture will change to color Illumination on Illumination on is 1 to15 grade selectable default is 9 on the auto IR working mode if the illumination on level is less than the ambient light the picture will change to color the IR illumination will turn off automatically if the illumination on level is more than the ambient light the picture will change to black the IR illumination will turn on automatically Ambient light Ambient light is a system data user can not change it manually it is change according to the environment all the time the data will be refresh every time when user enter the OSD It is between 0 to 50 grade 17 6 5 3 Guard tours GUARD TOURS gt lt GUARD TOUR 01 gt GUARDTOUR MM ID POINT TIME lt S gt SPEED SETTING D uu ans m INIT 2 02 06 64 RUNNING 3 03 06 64 DELETE 4 04 06 64 5 05 06 64 6 06 06 64 7 07 06 64 8 08 06 64 EXIT EXIT Fig 6 4 5 1 Fig 6 4 5 2 Guard tour Total 3 guard tours selectable 4IFig 6 4 5 1 Set Each guard tour includes max 8 presets the number ofthe preset is from 1 64 0 is not valid dwell time is 2 to 60s selectable speed is 1 to 64 grade selectable Reset After reset pre
15. exit the OSD Up or Down Move the option of the OSD change the value on the OSD Right Enter the option select the item or confirm Left Return to main menu or cancel Remark 1 item lt gt mean it with sub menu 2 After enter the menu if the cursor change from means the user can start setting with up down key 11 6 2 OSD tree COMM MN DEVICE ID PROTOCOL CHECK ID 000 AR DISPLAY DOME ID 001 TARGET ID oo WORKING MODE AUTO 2400 N 8 1 SOFT PROTOCOL AUTO TESTING TIME 085 VERSION BAUD RATE 2400 5 OUTPUT POWER 1008 dur lt COMM RESET STANDBY POWER SAVE STANDBY TIME 208 EXIT ILLUMINATION ON 03 AMBIENT LICH COMM lt SCAN eem EXIT UR DISPLAYD PRESET A o RSET lt GUARD TOURS PRESET 02 Pe S GUARD TOURS SCAND SA ORIS E ee H COMM RESET AS BELOW SCAN DWELL TIME 06 GUARD TOUR o PP PARK ACTION RUNNING SETTING kcc PRIVACY ZONE INIT DISPLAY eur RUNNING ADVANCED DELETE au ACTION EXIT CAMERA PARK MODE ore PARK TIME 01M ze d GUARD TOUR 01 gt CAM AUTO SCAN MAIN MENU kaimi Qu
16. hing several domes with same ID and altering target ID soft protocol and baud rate need to enter check ID in line with the device ID otherwise altering can t be completed SOFT DOME ID Soft dome ID is available from 001 to 250 default is 1 SOFT PROTOCOL Soft protocol is auto Pelco D and Pelco P available BAUD RATE 1200BPS 2400BPS 4800BPS 9600BPS available 15 COMM reset User can reset the communication to factory default Please check the Fig 6 5 1 2 SAVE Please save the change of communication After save the dome will reboot Changing the comm must be saved to be effective 6 5 2 IR display lt IR DISPLAY gt WORKING MODE AUTO TESTING TIME 08S OUTPUT POWER 100 STANDBY POWER 80 STANDBY TIME 208 ILLUMINATION ON 05 AMBIENT LIGHT XX EXIT Working mode IR working mode is auto black color selectable default is auto Testing time On IR auto working mode and the programmed time the IR will execute the programmed action eg Switch from day to night or from night to day The 16 detection time is from 2s to 15s selectable Output power IR output consumption is 4090 60 80 100 selectable Standby power IR stand by power is 20 40 6090 80 selectable default is 80 IR standby power is much less than IR output power Standby time IR standby time is 15 30s selectable Default is 20s eg After enter the OSD menu user can set testing time as 8s IR output pow
17. ick erm ehren di ID POINT TIMES SPEED RUNNING arme DIGITAL ZOOM TILT DEGREE 4s oun FOCUS AUTO INIT 2 Hr 06 lt CAMERA gt mis AUTO un RUNNING LANGUAGE OFF BEEN 6 gt FREEZE OFF Lo 5 9 06 64 0 06 EXIT EXIT DISPLAY V ro 06 64 lt LANGUASID SETTING SYSTEM n ok ON LANGUAGE ENGLISH mr ACTION EXIT pi ADVANCED DOME ID ON CRESET PWR ON ACTION MEMORY RATIO SPEED RESTART 3 257 AUTO FLIP ON lt SYS OTHERS DATA gt EXIT lt PRESET gt SYS DATA EXIT DOME RESTART pen CONFIRM EXIT LEXIT lt PRESET DATA ls zu E x 1 CONFIRM DEL ALL PRESETS CONFIRM CONFIRML DEL 01 TO 16 EXIT CONFIRM2 DEL 17 32 CONFIRM DEL 33 TO 48 CONFIRM4 DEL 49 TO 96 EXIT 12 6 3 Main menu lt MAIN MENU gt lt SYSTEM gt lt DOME gt lt CAMERA gt lt LANGUAGE gt lt RESET gt EXIT 6 4 System information lt SYSTEM gt MFG PROTOCOL AUTO DOME ID 001 COMM 2400 N 8 1 VERSION MZ1 01 EXIT MFG Max 15 characters display on the screen PROTOCOL Display the protocol of the dome DOME ID display the dome address default address is 001 COMM Default comm is 2400 N 8 1 13 6 5 Dome lt COMM gt lt IR DIS
18. it display the dome communication information user can enable and disable it 6 6 Camera lt CAMERA gt CAM AUTO ZOOM SPEED QUICK DIGITAL ZOOM OFF FOCUS AUTO IRIS AUTO BLC OFF FREEZE OFF EXIT Camera Display the information of module used Zoom speed Zoom speed is quick and slow selectable Digital zoom Digital zoom is on off selectable Focus Focus is auto and manual selectable IRIS Iris is auto and manual selectable BLC is on and off selectable FREEZE Video freeze on off selectable Remark Only if those functions are available on the module the user can use it 26 6 7 Language lt LANGUAGE gt LANGUAGE ENGLISH EXIT 6 8 Reset lt RESET gt lt DOME RESART gt lt DOME RESART gt CONFIRM lt SYS DATA gt EXIT lt CAM DATA gt lt PRESET gt EXIT lt SYS DATA gt lt CAM DATA gt CONFIRM CONFIRM EXIT EXIT 27 lt lt PRESET gt CONFIRM DEL ALL PRESETS CONFIRM1 DEL 01 TO 08 CONFIRM2 DEL 09 TO 16 CONFIRM3 DEL 17 TO 24 CONFIRM4 DEL 25 TO 64 7 SHORT CUTS COMMEND The follow preset are predefined as special function please Call preset No enter to enable those functions PREST FUNCTION PRESET FUNCTION 33 Pan scan180 88 Freeze on 34 Reset 89 Freeze off 79 Digital zoom on 92 A B scan 80 Digital zoom off 94 OSD off 81 Auto day night 95 OSD on 82 Switch to night
19. mask use up down left right or use wide tele key to adjust the position of the mask 5 Call preset 1 to save the mask Remark the mask size is better two time or more than the target size 6 5 8 Advanced lt ADVANCED gt PWRONACTION MEMORY RATIO SPEED ON AUTO FLIP ON lt OTHERS gt Power on action Power on action includes power on memory A B scan Pan scan Park action guard tour1 guard tour2 guard tour3 default is power on memory Ratio speed 23 Ration speed is on and off selectable default is on on this mode when the dome is zooming in the movement speed of the dome will reduce when the dome zooming out the speed will increase Auto flip Auto flip is on and off selectable default is on Others This item is reserved 6 5 9 Display lt DISPLAY gt SYSTEM NTSC PANDT ON ACTION ON IR OFF DOME ID ON COMM OFF EXIT Video System Video system includes NTSC and PAL N means NTSC P means PAL Default is P 24 On screen it display pan tilt degree user can enable and disable it Action On the screen it displays the current action eg A B scan set call preset set home position Pan scan etc user can enable or disable it IR display IR information is display on the screen user can enable or disable it Address On screen it display the dome address user can enable and disable it Communication On screen
20. set point dwell time speed will resume to default setting Running Running the guard tour set 18 Delete Delete the guard tour set after delete the preset point display as 0 6 5 4 A B scan lt A B SCAN gt ere PRESET A 01 PRESET 02 SCAN SPEED 20 RUNNING DWELL TIME 06 LEFT KEY TO EXIT RUNNING DELETE EXIT P XXX T XX Fig 6 4 6 1 Fig 6 4 6 2 A point On scan A point can be preset from 0 to 64 B point On scan point can be preset from 0 to 64 Scan speed A B scan speed is to 64 grade selectable Dwell time Dwell time between A to B is 5s to 60s selectable 19 Running Running the scan Check Fig 6 4 6 2 Delete After delete it the preset point display as 0 speed and dwell time will reset as default setting 6 5 5 Pan scan lt PAN SCAN gt lt TILT DEGREE gt PAN SCAN SPEED 20 lt TILT DEGREE gt 45 PRESET 1 SAVE AND BACK INIT RUNNING PRESET 2 BACK TO LAST MENU EXIT TILT XX Fig 6 4 7 1 Fig 6 4 7 2 Pan scan Scan speed is 2 to 64 grade selectable default speed is 20 grade Tilt degree After enter the menu as 6 4 72 move the dome as the desired tilt position call preset to save and return call preset 2 exit and return Default tilt degree is 45 20 Reset Reset the scan speed and tilt degree as default setting Running Running the Pan scan set 6 5 6 Park action lt PARK
21. y There are no serviceable parts inside the camera All electrical connections to the dome should be made in strict accordance with the attached labels and wiring instructions in this manual Failure to do so may damage the dome beyond repair and void the warranty For outdoor installation especially in high places or poles it is highly recommended that the proper lightning arrestors and surge suppressors are installed before the dome is entered into service Please do not use the product under circumstances where the limits exceed the maximum specified temperature humidity or power supply specifications IMPORTANT SAFEGUARDS ja Read these instructions before attempting installation or operation of dome device 2 Keep these instructions for future reference 3 Heed all warnings and adhere to electrical specifications Follow all instructions 4 Clean only with non abrasive dry cotton cloth lint free and approved acrylic cleaners 5 Should the lens of the camera become dirty use special lens cleaning cloth and solution to properly clean it 6 Do not block any ventilation openings Install in accordance with manufacturer s instructions 7 Use only attachments or accessories specified by manufacturer 8 Verify that the surface you are planning to use for attaching the dome can adequately support the weight of the device and mounting hardware 9 Protect this devices against lighting storms with proper power supplies 10
Download Pdf Manuals
Related Search