FX3U-7DM USER`S MANUAL
Contents
1. from the main unit right fig D as indicated with the arrow 3 4 Place the G side of the display module mounting top cover right fig F onto the main unit right fig D 5 The display module mounting top cover right fig F is installed in the Main module right fig D as shown in the right figure 3 Specification STARTUP AND MAINTENANCE PRECAUTIONS e Do not disassemble or modify the unit CAUTION Doing so may cause failure malfunction or fire For repair contact your local Mitsubishi Electric distributor Do not drop the product or do not exert strong impact doing so may cause damage DISPOSAL PRECAUTIONS Z CAUTION e Please contact a company certified in the disposal of electronic waste for environmentally safe recycling and disposal of your device TRANSPORT AND STORAGE PRECAUTIONS e During transportation avoid any impact as the product is a precision instrument Check the operation of the product after transportation Z CAUTION 3 1 Applicable PLC Model FX3u Series PLC FX3uUC Series PLC Applicability Ver 2 00 from the first product and later Ver 1 00 and later FX3UC 32MT LT has this display module provided as standard equipment 3 2 Display Specifications Item Description STN monochrome liquid crystal display Backlight LED green 16 letters x 4 lines 2 byte letter2. 8 letters x 4 lines Display device backlight Number of letters Alphabets Numbers Japanese character Displayed Character Shift JIS Level 1 2 letters Language for menu display Japanese English Button 4 operation buttons OK ESC and 3 3 General Specifications General specifications are the same as the PLC main unit For general specifications refer to the following manual Refer to FX3U Series User s Manual Hardware Edition 3 4 Power Supply Specifications 5V DC 20 mA is supplied from the internal power supply in main unit 4 Function List For the function list refer to the PLC main unit manual However FX3UC Series PLC manual is only available in Japanese For FX3u Series PLC refer to FX3U Series User s Manual Hardware Edition This manual confers no industrial property rights or any rights of any other kind nor does it confer any patent licenses Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual Warranty Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi machine damage or lost profits caused by faults in the Mitsubishi products damage secondary damage accident compensation caused by special factors unpredictable by Mitsubishi damages to products other than Mitsu
3. JY997D17101A JAPANESE 7 a MITSUBISHI PROGRAMMABLE CONTROLLERS MELSEGF FX3U 7DM Side ENGLISH Changes for the Better USER S MANUAL JY997D17101 Manual Number Revision A May 2005 Date 3U This manual describes the part names dimensions mounting and specifications of the product Before use read this manual and manuals of relevant products fully to acquire proficiency in handling and operating the product Make sure to learn all the product information safety information and precautions And store this manual in a safe place so that you can take it out and read it whenever necessary Always forward it to the end user Registration The company name and the product name to be described in this manual are the registered trademarks or trademarks of each company Effective May 2005 Specifications are subject to change without notice 2005 Mitsubishi Electric Corporation Safety Precaution Read these precautions before use This manual classify the safety precautions into two categories lt DDANGER and NCAUTION Indicates that incorrect handling may cause hazardous DANGER conditions resulting in death or severe injury Indicates that incorrect handling may cause hazardous ZACAUTION conditions resulting in medium or slight personal injury or physical damage Depending on circumstances procedures indicated by CAUTION
4. bishi products and to other duties A For safe use e This product has been manufactured as a general purpose part for general industries and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life e Before using the product for special purposes such as nuclear power electric power aerospace medicine or passenger movement vehicles consult with Mitsubishi Electric e This product has been manufactured under strict quality control However when installing the product where major accidents or losses could occur if the product fails install appropriate backup or failsafe functions in the system a MITSUBISHI ELECTRIC CORPORATION HEAD OFFICE MITSUBISHI DENKI BLDG MARUNOUTI TOKYO 100 8310 HIMEJI WORKS 840 CHIYODA CHO HIMEJI JAPAN
5. may also be linked to serious results In any case it is important to follow the directions for usage Associated Manuals Manual name Manual No Description Explains external dimensions FX3uU 7DM HLD installation and specifications User s Manual Jy997D15401 of FX3U 7DM HLD display module holder FXsu Series JY997D16501 de aa e User s Manual MODELCODE SPecicaiion detal s Tor S Hard Editi 09R516 wiring installation and Hardware Edition maintenance For the operation of the display module refer to the PLC main unit manual Note FX3uc Series PLC specification details for I O wiring installation and maintenance can only be found in the Japanese Manual Refer to FX3U Series User s Manual Hardware Edition How to obtain manuals For the necessary product manuals or documents consult with the Mitsubishi Electric dealer from where you purchase your product Applicable standard FX3uU 7DM made in May 2005 or later complies with the EC Directive EMC Directive Further information can be found in the following manual However FX3UC 32MT LT does not comply with EC Directive EMC Directive Refer to FX3U Series Hardware Manual Manual No JY997D18801 1 Outline The FX3U 7DM display module hereinafter called display module is installed to the FX3u FX3uc Series PLC main unit FX3UC 32MT LT provided as standard equipment to display messages alphabet numbers and Japanese characters
6. off all phases of the power source externally before starting the installation or wiring work thus avoiding electric shock or damages to the product INSTALLATION PRECAUTIONS Z CAUTION e Use the product in the environment within the general specifications described in PLC main unit manual Hardware Edition Never use the product in areas with dust oily smoke conductive dusts corrosive gas salt air Cle H2S NH3 SO2 or NO2 flammable gas vibrations or impacts or expose it to high temperature condensation or wind and rain If the product is used in such a place described above electrical shock fire malfunction damage or deterioration may be caused Do not touch the conductive parts of the product directly thus avoiding failure or malfunction Fix the display module securely to the specified connector Incorrect connection may cause malfunction Installation to and removal from the FX3U Series PLC is shown below For installing to and removing from the FX3uC Series PLC main unit refer to FX3UC Series PLC main unit manual However FX3UC Series PLC manual is only available in Japanese 1 Turn off the power 2 Pushing the top cover hook right fig A remove the top cover right fig B as shown in the right figure 3 When installing Install the display module right fig C to E on the main unit right fig D as indicated with the arrow 3 When removing Remove the display module right fig C
7. or to monitor change device states 1 1 Incorporated Items Check if the product and accessories shown below are included in the package FX3U 7DM display module Display module mounting top cover MITSUBISHI ULE ssc Fay i a 1 2 External Dimensions and Part Names Manual Unit mm inches This manual MASS Weight Display module 20g 0 05Ibs Display module mounting top cover 10g 0 03lbs Display module Display module mounting top cover n 12 6 al8 m z WS as H Bee aos HS aac1 89 Nis 0467 130 527 _ 66 3 2 62 No Name Description 1 Display Displays current time and monitored status of device 2 ESC button Use to cancel operation or return to previous screen 3 button Use to move cursor or set the value 4 button Use to move cursor or set the value 5 OK button Use to choose the item set the value etc 6 Connector for main unit Used to connect display module to main unit 7 Top cover fixing hook Fixes the display module installing top cover on PLC 1 3 Installation Example Install to main unit Install to control panel For installation refer to FX3uU 7DM HLD User s Manual FX3u 7DM a FXau 7DM HLD FX3u 7DM Hn iiij A 2 Installation and Remove INSTALLATION PRECAUTIONS DANGER e Cut
Download Pdf Manuals
Related Search