AUTDOME 4000 Mini PTZ Dome
Contents
1. ADVANCED SETUP SHARPNESS BACKLIGHT SAVE BACK Select the option Sharpness Set the sharpness level Select the option Backlight Select the appropriate value ON or OFF Save the settings Oe ON WDR DNR When both high brightness subjects and low brightness subjects need to be displayed at the same time overexposure in the high brightness areas or a loss of dark detail in the low brightness areas may occur The WDR Wide Dynamic Range function creates images free from over exposure or loss of dark detail by combining two images from tripping the shutter for a long exposure time and for a short exposure time in one field The DNR Digital Noise Reduction function creates noiseless Bosch Security Systems Inc 2013 4 62 en On Screen Display OSD Menu AUTDOME 4000 Mini PTZ Dome images even in low light In WDR on mode unnatural color or image and noise may occur in a bright area Under special illumination it is better to avoid using the WDR function To set WDR and DNR settings 1 From the MAIN MENU select CAMERA SETUP The submenu CAMERA SETUP appears 2 Select WDR DNR The screen WDR DNR appears WDR DNR WDR SETUP WDR LEVEL DNR SETUP DNR LEVEL SAVE BACK Select the option WDR Setup Select the value On Select the option WDR Level Set the appropriate level Select2. Horizontal Vertical H N Horizontal Vertical 3 Select the desired value 4 Savethe settings 7 4 4 Motion Face Detection Program the camera to monitor the movements of the image and send an alarm message to the OSD in the Alarm Out action To set up motion face detection 1 From the MAIN MENU select DISPLAY SETUP The submenu DISPLAY SETUP appears 2 Select MOTION FACE The screen MOTION FACE DETECTION appears MOTION FACE DETECTION MD FD SENSITIVITY ALARM Bosch Security Systems Inc 2013 4 54 en On Screen Display OSD Menu AUTDOME 4000 Mini PTZ Dome MOTION FACE DETECTION ATIME SAVE BACK Select the option MD FD to program motion detection and or face detection 2 Select the appropriate value Off MD FD 3 Select the option Sensitivity 4 Select the appropriate value 5 Select the option Alarm 6 Select the appropriate value OSD Alarm Out Both 7 Save the settings 7 4 5 Language To select a different display language 1 From the MAIN MENU select DISPLAY SETUP The submenu DISPLAY SETUP appears 2 Select L ANGUAGE The screen L ANGUAGE appears 3 Select the desired language English Chinese Dutch French 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 55 German Italian Russian
3. Spanish 7 5 Camera Setup CAMERA SETUP FOCUS ZOOM W BALANCE EXPOSURE DAY NIGHT ADVANCED WDR DNR EXIT From this menu you can set the focus zoom white balance auto exposure day night the WDR DNR settings and Advanced settings 7 5 1 Focus Zoom Auto Focus allows the lens to remain in focus during zoom in zoom out and motion functions automatically Zoom speed allows the user to define how fast the camera will go from full wide zoom to the 30X optical zoom To set focus zoom settings 1 From the MAIN MENU select CAMERA SETUP The submenu CAMERA SETUP appears 2 Select FOCUS ZOOM The screen FOCUS ZOOM SETUP appears Bosch Security Systems Inc 2013 4 56 en On Screen Display OSD Menu AUTDOME 4000 Mini PTZ Dome FOCUS ZOOM SETUP FOCUS ZOOM SPD D ZOOM SAVE BACK 1 Select the option Focus 2 Select the appropriate value Auto Manual Semi Auto 3 Select the option Zoom Spd to set the zoom speed 4 Select the appropriate value Slow Normal Fast V Fast 5 Select the option D Zoom to set the Digital Zoom 6 Select the appropriate value ON or OFF 7T Save the settings 7 5 2 WB Setup The WB White Balance feature automatically processes the displayed image to retain color balance over different color temperature ranges In Manual mode you can change th
4. to select a scan number Select the appropriate scan number Select the option Edit Select the value Edit Start Point The screen Start Position Setup appears Using the joystick move to a desired target Pan Tilt Zoom for the starting point of the scan Save the settings The screen Stop Position Setup appears Using the joystick move to a desired target Pan Tilt Zoom for the stopping point of the scan Save the settings Return to the previous screen Select the option Speed Select the desired speed from 1 to 35 second Select the option DTime to set the dwell time for the scan Set the desired time from 3 minute to 60 seconds Select the option Direction Select the appropriate value for the direction of the scan Bosch Security Systems Inc 2013 4 AUTDOME 4000 Mini 74 en On Screen Display OSD Menu PTZ Dome 16 Select the option Mode 17 Select the appropriate value for the mode In Auto Scan there are two modes Endless mode When the Start Position is the same as the Stop Position the dome moves around Coming Going mode When the Start Position is different from the Stop Position the dome moves repeatedly from one position to another 18 Save the settings Note Select the option Clear to delete the scan Notice In order to call an action Preset Pattern Tour or Scan you must save Preset Pattern Tour or Scan first You can also edit the
5. une protection raisonnable contre les interf rences nuisibles quand l appareil est utilis dans un environment commercial Cet appareil g n re utilise et met de l energie de fr quence radio et peut en cas d installation ou d utilisation non conforme aux instructions engendrer des interf rences nuisibles aux radiocommunications Toutefois rien ne garantit l absence Bosch Security Systems Inc 2013 4 AUTDOME 4000 Mini 14 en Safety PTZ Dome d interf rences dans une installation particuli re L utilisation de ce produit dans une zone r sidentielle peut provoquer des interf rences nuisibles Le cas ch ant l utilisateur devra rem dier ces interf rences ses propres frais ll est possible de d terminer la production d interf rences en mettant l appareil successivement hors et sous tension tout en contr lant la r ception radio ou t l vision L utilisateur peut parvenir liminer les interf rences ventuelles en prenant une ou plusieurs des mesures suivantes Modifier l orientation ou l emplacement de l antenne r ceptrice loigner l appareil du r cepteur Brancher l appareil sur une prise situ e sur un circuit diff rent de celui du r cepteur Consulter le revendeur ou un technicien qualifi en radio t l vision pour obtenir de l aide Toute modification apport e au produit non express ment approuv e par la partie responsable de l appareil est strictement interdi
6. Power Consumption 24 VAC 850mA 20W without heater 24 VAC 2A 45W with heater Alarm Input 4 Normal Dry Contact Selectable NC NO Alarm Output 1 Normal Relays 5VDC 40mA Max Selectable NC NO Control RS 485 baud rate 2400 38 4Kbps default 9600bps Access Time 0 75 second maximum preset recall time Camera Address ID Physical 99 Bosch Security Systems Inc 2013 4 82 en Technical Specifications AUTOT ME SOO MINI PTZ Dome Camera Module Mechanical Weight 1 5 kg Dimension 154 x 138 mm H Bubble Dome 2110 Pan Angle 360 Continuous rotation Environment Operating Temperature 10 C to 50 C 14 F to 122 F heater off 40 C to 10 C 40 F to 50 F heater on Heater Built in On Off O C to 10 C Operating Humidity 80 relative humidity RH Storage Temperature 20 C to 60 C 4 F to 140 F 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini Dimensionslen 83 PTZ Dome 10 Dimensions 112 4 41 5 43 151 3 5 96 in 9154 6 06 Figure 10 1 Dimensions Camera i 5 85 6 3 37 XS mm in 85 6 337 Figure 10 2 Dimensions Mounting Holes Bosch Security Systems Inc 2013 4 84 en Bosch Protocol 11 Bosch Protocol The following table lists camera fun
7. The installation should be made by qualified installation personnel and conform to the National Electrical Code and applicable local codes 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Installing a Surface Mount en 25 5 Installing a Surface Mount Use the following illustration as a guide for installing the camera directly onto the ceiling surface mount Figure 5 1 Mounting diagram Numbe Description r 1 Drilling template 2 6 x 30 mm plastic anchor Bosch Security Systems Inc 2013 4 26 en installing a Surface Mount AUTDOME 4000 Mini PTZ Dome Numbe Description r 3 Camera base 4 O ring 5 8 x 32 screw 6 Safety strap will hold item 7 dome cover for easy installation 7 Dome cover 8 M4 x 12 Torx screw Caution To prevent humidity problems the camera must be installed in dry conditions and the cable leads should be sealed after they are connected Determine a secure location that can support the weight of the dome Use the template refer to page 25 item 1 to mark the locations of the four screw holes and the cable conduit Pre drill the four screw holes wide enough to accept the plastic anchors Cut out the entire cable conduit hole Insert the four plastic anchors item 2 inside the pre drilled holes Route the cables from the camera through the conduit in the ceiling Rem
8. again Bosch Security Systems Inc 2013 4 AUTDOME 4000 Mini 42 en On Screen Display OSD Menu PTZ Dome 7 2 Main Menu The MAIN MENU provides access to all programmable settings for the camera When you use Pelco D and Pelco P protocol with your controller you can access the MAIN MENU on your monitor by pressing the keys 95 Preset or by pressing and holding the Menu key for 2 seconds When you use Bosch OSRD protocol with your controller you can access the MAIN MENU on your monitor by pressing the keys ON 46 Enter MAIN MENU SYSTEM SETUP DISPLAY SETUP CAMERA SETUP DOME MOTION PRESET SETUP PATTERN SETUP TOUR SETUP SCAN SETUP ALARM SETUP EXIT MAIN MENU Choices 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome 7 2 1 On Screen Display OSD Menu en 43 Menu Description SYSTEM SETUP Accesses system information and actions such as rebooting resetting default settings setting or resetting passwords DISPLAY SETUP Accesses adjustable display settings such as OSD privacy zone masking image setup motion face detection and display language CAMERA Accesses adjustable camera settings such SETUP as focus zoom white balance exposure day night sharpness and backlight WDR DNR DOME MOTION Accesses adjustable pan tilt zoom PTZ settings such as preset
9. 2013 4 AUTDOME 4000 Mini 36 en Connection PTZ Dome Sey Figure 6 2 Dome Camera Switches Number Description 1 SW301 Rotary switch 2 SW303 Dip switches 3 SW302 Rotary switch Figure 6 3 Close up of Rotary Switches and Dip Switches 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome 6 5 1 Set Connection en 37 ting the address ID of the camera To prevent faulty operations and malfunctions each camera mus O ID t have an unique address ID The default setting is 001 XO X1 1 SW30 SW30 2 Table 6 5 Dome Camera ID Setting Rotary Switches SW301 SW302 6 5 2 Setting the protocol of the camera Set the protocol setting the baud rate and the termination setti ng of dip switch SW303 using the data in the tables below Note The value marked is the default setting No 1 No Protocol 2 Off On Bosch OSRD Off Off Pelco D Pelco P Table 6 6 Camera Protocol Setting No 1 amp 2 Dip Switch SW303 No No Baud Rate 4 bps Off Off 2400 Off On 4800 On Off 9600 On On 38400 Table 6 7 Camera Baud Rate Setting No 3 amp 4 Dip Switch SW303 Bosch Security Systems Inc 2013 4 3 AUTDOME 400
10. 2013 4 80 en Technical Specifications AUTDOME 4000 Mini PTZ Dome 9 Technical Specifications Camera Module Imager 1 4 Double Scan Super HAD CCD Effective Pixels NTSC 976 H 494 V PAL 976 H 582 V Resolution 600 TVL Zoom ratio 26X Effective Optical Zoom 10X Digital Zoom Auto Focus Lens fW 3 49 0 17mm fT 104 02 5 20mm 30X 10 Optical Zoom View Angle Approximate 69 5 to 2 46 Day Night Mechanical Day Night filter Minimum Illumination 0 2 Lux F1 65 0 001 Lux DSS 0 1 Lux ICR Signal to Noise Ratio gt 50 dB SNR Wide Dynamic Range On Off WDR Dynamic Noise Reduction 3 DNR DNR Privacy Masking 15 zones maximum Maximum Preset Speed 360 sec Flip Rotate 180 at bottom of tilt Auto Scan 2 8 Auto Scan modes including vector scan 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini Technical Specifications en 81 Camera Module Preset Position 99 210 Positions with camera status Tour 2 8 Tours Preset Pattern Scan Pattern 2 8 Patterns On screen Display OSD Display camera ID Title Mode and Angle on screen Multi Language Multi language OSD English Chinese Dutch German French Italian Russian Spanish Electrical Power Supply 24 VAC x1096 Normal Built in Power Line Surge Power Requirements Adaptor 24VAC 1A 2 5A with heater
11. 3 Home Action 66 7 6 4 Calibration 67 T f Preset Setup 68 7 8 Pattern Setup 70 7 9 Tour Setup 71 7 10 Scan Setup 72 7 11 Alarm Setup 74 8 Troubleshooting 77 9 Technical Specifications 80 10 Dimensions 83 11 Bosch Protocol 84 12 Pelco Protocol 87 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Safety en 5 Safety Before installing and operating the camera please read this manual carefully Safety precautions Danger High risk This symbol indicates an imminently hazardous situation such as Dangerous Voltage inside the product If not avoided this will result in an electrical shock serious bodily injury or death Warning Medium risk Indicates a potentially hazardous situation If not avoided this could result in minor or moderate bodily injury Caution Low risk Indicates a potentially hazardous situation If not avoided this could result in property damage or risk of damage to the unit Notice This symbol indicates information or a company policy that relates directly or indirectly to the safety of personnel or SPP Pe protection of property Bosch Security Systems Inc 2013 4 6 1 2 en Safety AUTDOME 4000 Mini PTZ Dome Important safety instructions DE D NES Read these instructions Keep these instructions Heed all warnings Follow these instructions Do not install near any heat sources such as radiators heater
12. DISPLAY SETUP appears 2 Select PRIVACY ZONE The screen PRIVACY ZONE SETUP appears PRIVACY ZONE SETUP PRIVACY EDIT DISPLAY WIDTH HEIGHT CLEAR SAVE BACK Bosch Security Systems Inc 2013 4 52 en On Screen Display OSD Menu 7 4 3 AUTDOME 4000 Mini PTZ Dome PRIVACY ZONE SETUP CHANGE 9 qw NES 12 Select the option Privacy Select a zone ID 00 14 Select the option Edit Select the value Mask Move to a target Pan Tilt and adjust a Mask using the joystick Pan Tilt Zoom Tele or Wide Save the position Exit the menu Edit Select the option Display Select the value On The mask appears Select a position Select the height XX and width XX of the mask 1 5X to resize the mask Save the settings Note Select the option Clear to clear the Mask Image Setup This menu is for changing displayed image settings To set up image setup 1 2 From the MAIN MENU select DISPLAY SETUP The submenu DISPLAY SETUP appears Select IMAGE SETUP The screen IMAGE SETUP appears IMAGE SETUP MIRROR SAVE 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 53 IMAGE SETUP BACK 1 Select the option Mirror Select the desired value for the image Normal
13. according to the luminance level To set day night 1 From the MAIN MENU select CAMERA SETUP The submenu CAMERA SETUP appears 2 Select DAY NIGHT The screen D N SETUP appears Bosch Security Systems Inc 2013 4 60 en On Screen Display OSD Menu 7 5 5 AUTDOME 4000 Mini PTZ Dome D N SETUP DAY NIGHT D amp N DETECT D N DTIME SAVE BACK T Select the option Day Night Select the appropriate value Auto Day Night Select the option D amp N Detect Select the appropriate value Auto Sensor Video Select the option D N Dtime Select the desired time to switch between day and night mode Save the settings Advanced Brightness increases as the numeric value is set higher The backlight compensation function provides compensation by increasing the brightness of the overall displayed image Subjects being shot with dark details due to backlight will have the correct brightness levels Sharpness enhances the picture 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome 7 5 6 On Screen Display OSD Menu en 61 detail by increasing the aperture gain of the camera and sharpening the edges in the picture To set sharpness and backlight settings 1 From the MAIN MENU select CAMERA SETUP The submenu CAMERA SETUP appears 2 Select ADVANCED The screen ADVANCED SETUP appears
14. base using the four M4 x 12 Torx screws with O rings item 4 attached using the supplied Torx wrench Make sure that the large rubber O ring between the camera base and dome cover is in place Bosch Security Systems Inc 2013 4 28 en Installing a Surface Mount 14 AUTDOME 4000 Mini PTZ Dome to protect the camera against water ingress Tighten the screws enough to ensure that the housing is secured to the camera base and that the rubber O rings seal the dome cover against water ingress Remove the plastic film protecting the dome cover from scratches 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome 6 Connection en 29 Connection After the camera is mounted connect the video control and power cables Caution Do not connect power to the camera until all other connections are made Caution Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes Caution All wires for installation applications must be routed through a grounded conduit gt DBD Caution To prevent humidity problems the camera must be installed in dry conditions and the cable leads should be sealed once connected Use the following illustration as a guide for preparing and connecting the wiring Bosch Security Systems Inc 2013 4 3 AUTDOME 4000 Mini 30 e
15. follow additional prompts 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 45 4 Savethe settings 7 3 System Setup Menu SYSTEM SETUP INFO REBOOT INITIALIZE 5 1 PROTOCOL LOG PASSWORD EXIT From this menu you can display system information reboot the system restore default settings initialize and set a password 7 3 1 System Information System Information displays details about the Model Name Running Version Protocol Communication Type Camera ID No System It is only for reference you cannot make changes here To display the System Information screen 1 From the MAIN MENU select SYSTEM SETUP The submenu SYSTEM SETUP appears 2 Select INFO The screen SYSTEM INFORMATION appears Bosch Security Systems Inc 2013 4 AUTDOME 4000 Mini 46 en On Screen Display OSD Menu PTZ Dome SYSTEM INFORMATION VEZ 400 MINI PTZ DOME VEZA SPD V1 0 0 VEZ4 CAM V1 0 0 RS485 9600 IDOO1 PAL Exit FAR gt Note the system information displayed Note The camera ID changes depending on settings 7 3 2 Reboot Reboot the system if there are any problems with controlling or operating the camera Rebooting will recycle power without changing camera settings To reboot the system 1 From the MAIN MENU select SYSTEM SETUP The submenu SYSTEM SE
16. output ports are Safety Extra Low Voltage SELV circuits SELV circuits should only be connected to other SELV circuits Because the ISDN circuits are treated like telephone network voltage avoid connecting the SELV circuit to the Telephone Network Voltage TNV circuits The system ground is only used to comply with safety standards or installation practices in certain countries Bosch does not recommend connecting system ground to safety ground unless it is explicitly required However if the system ground and safety ground are connected and grounding loops are causing interference in the video signal use an isolation transformer available separately from Bosch Caution Connecting System ground to Safety ground may result in ground loops that can disrupt the CCTV system Bosch Security Systems Inc 2013 4 12 en Safety 1 4 AUTDOME 4000 Mini PTZ Dome Video loss Video loss is inherent to digital video recording therefore Bosch Security Systems cannot be held liable for any damage that results from missing video information To minimize the risk of lost digital information Bosch Security Systems recommends multiple redundant recording systems anda procedure to back up all analog and digital information FCC amp ICES compliance FCC amp ICES Information U S A and Canadian Models Only This device complies with part 15 of the FCC Rules Operation is subject to the following condit
17. speed autoflip proportional pan tilt home preset and calibration PRESET SETUP Accesses preset setup PATTERN Accesses pattern setup SETUP TOUR SETUP Accesses tour setup SCAN SETUP Accesses scan setup ALARM SETUP Accesses the alarm settings such as inputs outputs and rules EXIT Exits the menu Editing Titles To edit the title of a function preset pattern tour scan Bosch Security Systems Inc 2013 4 44 en On Screen Display OSD Menu gt AUTDOME 4000 Mini PTZ Dome From the MAIN MENU move the joystick to the right setup menu of preset pattern tour and scan Move the joystick to the right again to select the Title menu The screen TITLE appears TITLE ABCDEFGHIJKLMNOPQRSTUVWXYZO 123456789 7 0 SELECT MOVE SET CLEAR TELE WIDE SAVE NEAR EXIT FAR 1 Move the joystick right left up or down to select a character 2 Press the button Tele to input a character Note To cancel a character press the Wide button 3 When you finish entering the title save the title Note To cancel the selected title use the Far button to return to the previous menu 7 2 2 Clearing Saved Functions To clear delete individual saved functions 1 Select a function in any menu PRESET TOUR PATTERN SCAN ALARM 2 Move the joystick right Select Clear 3 If necessary
18. the option DNR Setup Select the value On Select the option DNR Level Set the appropriate level Save the settings tO CO x OO ee NS CES 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini z PTZ Dome On Screen Display OSD Menu en 63 7 6 Dome Motion Setup DOME MOTION SETUP GENERAL SETUP MOTION SETUP HOME ACTION CALIBRATION EXIT From this menu you can set the general functions of the dome motion functions of the pan tilt zoom motor the home action and calibration 7 6 1 General Setup This menu controls general functions of the camera power up action turbo speed preset speed To set these functions 1 From the MAIN MENU select DOME MOTION The submenu DOME MOTION appears 2 Select GENERAL SETUP The screen GENERAL SETUP appears Lo 1 GENERAL SETUP POWER UP ACT TURBO SPEED Bosch Security Systems Inc 2013 4 64 en On Screen Display OSD Menu AUTDOME 4000 Mini PTZ Dome GENERAL SETUP PRESET SPEED SAVE BACK Select the option Power Up Act The power up action sets the function preset tour pattern and scan that the system should perform when the power is cycled or after an alarm action 2 Select the value On so that the system will resume its prior activity after an alarm or a power failure 3 Select the option Turbo Sp
19. this chapter are written with the idea that camera operators know the joystick keyboard commands listed in the table below for actions Select Clear Save Exit Command Action Move the joystick up to select an item Move the joystick down to select an item Move the joystick left to select options for an item gt Open button Near button Move the joystick right to select options for an item Move the joystick right to select change or save values or to go to edit pages gt Close button Far button Move the joystick right to cancel or to exit the current menu Return to the previous menu without saving f Turn the joystick clockwise zoom tele LY Turn the joystick counterclockwise zoom wide KEY Press the defined key In Bosch Stop an action camera switches to protocol Aux code In Pelco protocol 96 Preset or ESC button manual mode and pauses temporarily 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 41 Notice You must save each state after each step of the submenu or the edit menu upon editing functions or changing settings You may need to save settings for one function twice For example after the position or the title of a Preset is saved at the Sub Menu the status of the Preset Setup must be saved at the Preset Setup Menu
20. 0 Mini 38 en Connection PTZ Dome No Termination Off Off On On Table 6 8 Camera s RS 485 Termination Setting No 5 Dip Switch SW303 Notice When the RS 485 signal is looped through make sure that only the last device is properly terminated Improper RS 485 wiring or termination may result in unreliable system operation 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 39 7 On Screen Display OSD Menu Notice Before beginning this section of the manual you must install and connect the camera to an interface device Refer to the Mounting Manual Once you have installed the camera apply power to the camera When the camera is powered up the start up screen appears on the monitor VEZ 400 MINI PTZ DOME RS 485 9600 IDOO1 CAM TEST PASS 7 1 Basic Navigation and Common Actions Camera operators can operate the camera by two methods Use of hot keys Refer to Bosch Protocol page 84 Use of the OSD Menu displayed on the monitor Continue to read this chapter The following table identifies the symbols that depict actions of the joystick controller or the keys on the keyboard that control the camera Bosch Security Systems Inc 2013 4 40 en On Screen Display OSD Menu AUTDOME 4000 Mini PTZ Dome Notice The step by step instructions in
21. AUTDOME 4000 Mini PTZ Dome VEZ 400 Series BOSCH en Operations Manua AUTDOME 4000 Mini PTZ Dome Table of Contents en 3 Table of contents 1 Safety 5 1 1 Safety precautions 5 1 2 Important safety instructions 6 1 3 Important notices 8 1 4 FCC amp ICES compliance 12 1 5 Bosch notices 15 2 Description 17 2 1 Features 17 3 Unpacking 19 3 1 Parts List 19 3 2 Additional Tools Required 21 3 3 Accessories 21 4 Installation Overview 24 5 Installing a Surface Mount 25 6 Connection 29 6 1 RS 485 Connections 31 6 2 Video Connection 33 6 3 Alarm Connections 33 6 4 Power Connections 35 6 5 Camera Settings 35 6 5 1 Setting the address ID of the camera 37 6 5 2 Setting the protocol of the camera 37 7 On Screen Display OSD Menu 39 7 1 Basic Navigation and Common Actions 39 7 2 Main Menu 42 1 2 1 Editing Titles 43 6 2 2 Clearing Saved Functions 44 7 3 System Setup Menu 45 7 8 1 System Information 45 7 3 2 Reboot 46 7 3 3 Initialize 47 7 3 4 Password 48 7 4 Display Setup 49 Bosch Security Systems Inc 2013 4 AUTDOME 4000 Mini 4 en Table of Contents PTZ Dome 7 4 1 OSD Setup 49 7 4 2 Privacy Zone 51 7 4 3 Image Setup 52 7 4 4 Motion Face Detection 53 7 4 5 Language 54 7 5 Camera Setup 55 1 51 Focus Zoom 55 7 5 2 WB Setup 56 1 5 3 AE Setup 58 7 5 4 D N Setup 59 7 5 5 Advanced 60 7 5 6 WDR DNR 61 7 6 Dome Motion Setup 63 7 6 1 General Setup 63 7 6 2 Motion Setup 64 7 6
22. Dome Unpacking en 19 3 Unpacking This equipment should be unpacked and handled with care If an item appears to have been damaged in shipment notify the shipper immediately The original packing carton is the safest container in which to transport the unit and must be used to return the unit for service Save it for possible future use Verify that all the parts listed in the Parts List are included If any items are missing notify your Bosch Security Systems Sales or Customer Service Representative 3 1 Parts List Qty Description aw 1 AUTODOME 4000 Mini PTZ Dome A camera 1 Drilling Template 4 6 x 30 mm plastic anchors LN m 8 x 32 screws and attached O rings M4 x 12 Torx screws and attached O rings Bosch Security Systems Inc 2013 4 AUTDOME 4000 Mini 20 en Unpacking PTZ Dome Qty Description 1 T20 Security Torx wrench 1 User Manual this booklet Warning Make sure that appropriate mounting screws rubber O rings and anchors are used for the surface to which the camera is mounted The supplied plastic anchors and mounting screws are only suitable for mounting the camera on a concrete ceiling 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Unpacking en 21 3 2 Additional Tools Required No 2 Phillips screwdriver Drill with appropriate bit for pre drilling anchor holes Ap
23. I PTZ Dome Problem Solution Camera is not working Power cycle the camera and properly including power supply or reset the camera wrong position of using the configuration menu Main camera gt System gt Reboot Check the connection of the power cable and the status of the camera Initialize the camera Main gt System gt Initialize Check the power rating of the power supply Measure the voltage at the camera since there could be a drop in voltage due cable length The power consumption increases when the camera is moving especially at high speed and when the heater is on The voltage at the camera should always be 24VAC 10 The communication Check that the RS 485 cable is between controller and connected correctly camera via RS 485 Check the ID Protocol Baud rate cable is not working Termination setting properly 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Troubleshooting e n 79 Problem Solution The surface of the dome case is hot Check the voltage level of the dome camera and the status of the camera Check that the camera is connected to the proper power The image on the screen flickers Check to see if the camera faces directly into the sun or a fluorescent lamp If so reposition the dome Check for flickers on the screen Bosch Security Systems Inc
24. R1 PRESET ONLY SAVE BACK CHANGE ID CHANGE ACT Bosch Security Systems Inc 2013 4 AUTDOME 4000 Mini 72 en On Screen Display OSD Menu PTZ Dome TOUR SETUP CLEAR ID 1 Selecta tour number Select the first item in the list From here you can Press the button Tele Wide to select a Preset a Pattern a Tour and or a Scan in each item Press the button Tele Wide to change the number of the action Press the button Near Far to change the mode of the action Press the button Near Far to clear delete the action in each item 3 Repeat steps 2 and 3 for additional tours 4 Savethe settings Note Select the option Clear to delete the tour 7 10 Scan Setup An Auto scan is a PTZ function that moves the camera from one position to another position The camera has a maximum of 8 programmable scans The speed of Auto Scan can be changed from 1 to 35 degree sec To set up program an auto scan gt From the MAIN MENU select SCAN SETUP The screen SCAN SETUP appears SCAN SETUP EDIT 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 73 SCAN SETUP SPEED DTIME DIRECTION MODE CLEAR SAVE BACK Bom 8 9 10 11 12 13 14 15 Select the option NO
25. Scan title Select the option Title then edit the title following the steps in Editing Titles page 43 7 11 Alarm Setup This menu controls alarm inputs and outputs To set alarms 1 From the MAIN MENU select ALARM SETUP The screen ALARM SETUP appears 2 Select the option NO to select a preset number ALARM SETUP NO IN OUT PRIORITY ACTION 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 75 ALARM SETUP NUMBER ATIME SAVE BACK SET CLEAR 1 Select the appropriate alarm number 2 Select the option In to select the alarm input type Select the appropriate value N O Normally Open or N C Normally Closed 4 Select the option Out to select the alarm output 5 Select the appropriate value ON or OFF 6 Select the option Priority 7 Select the appropriate priority from 1 4 8 Select the option Action 9 Select the appropriate action Off Preset Pattern Scan or Tour 10 Select the option Number 11 Select the number of the action Preset Pattern Scan or Tour 12 Select the option ATime to set the alarm time for the action 13 Set the desired dwell time Time Out 3 60seconds This is activated during a selected dwell time when an alarm is triggered Momentary On When an alarm is triggered the camera will main
26. Select the option Mode Select the appropriate value Off Manual or On Auto Save the settings 7 6 4 Calibration Calibration is a function for automatically correcting an error on the angle of Pan Tilt Calibration can be set at Auto or Manual In Auto mode the camera is corrected automatically whenever there is an error on the angle of the camera The motor of the Pan Tilt will adjust its angle automatically In Manual mode select the option Calibration to execute the function Error Message Display is a function for displaying an error message to let a user know when there is an error 1 From the MAIN MENU select DOME MOTION The submenu DOME MOTION appears Select CALIBRATION The screen CALIBRATION SETUP appears CALIBRATION SETUP AUTO CAL ERROR MSG DISP Bosch Security Systems Inc 2013 4 68 en On Screen Display OSD Menu AUTDOME 4000 Mini PTZ Dome CALIBRATION SETUP CALIBRATION SAVE BACK 1 Select the option Auto Cal This function is for automatic calibration 2 Select the appropriate value AUTO or MANUAL 3 n Manual mode select the option Calibration to execute the function using the joystick 4 Select the option Yes or press the Near button to continue 5 Select the option Error Msg Disp Error Message Display 6 Select the appropriate option ON or OFF 7T Save the settings 7 7 Preset Se
27. TUP appears 2 Select REBOOT The screen REBOOT appears REBOOT CONTINUE YES NEAR NO FAR 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 47 1 Select the option Yes 2 Select the value Near The system reboots 7 3 3 Initialize Initialize the system to restore some or all of the camera settings to their defaults To initialize 1 From the MAIN MENU select SYSTEM SETUP The submenu SYSTEM SETUP appears 2 Select INITIALIZE The screen INITIALIZE appears INITIALIZE ALL CAM PRESET TOUR PATTERN SCAN ETC SAVE BACK 1 Select the function to initialize ALL Clear All items saved in the system CAM Clear camera related settings PRESET Clear all saved presets To clear presets individually refer to Preset Setup page 68 TOUR Clear saved Tours Bosch Security Systems Inc 2013 4 48 en On Screen Display OSD Menu AUTDOME 4000 Mini PTZ Dome PATTERN Clear saved Patterns SCAN Clear saved Scan items ETC Clear other settings except camera and PTZ settings CAM status and saved PRESET TOUR PATTERN and SCAN 2 Select the value Clear 3 Save The system restores the default settings of the camera 7 3 4 Password Set a four char
28. acter password to prevent unauthorized access and changes to the camera settings Users operators must enter the valid password before programming the camera The default password is 0000 To set enable a password 1 From the MAIN MENU select SYSTEM SETUP The submenu SYSTEM SETUP appears 2 Select PASSWORD The screen PASSWORD appears PASSWORD CURRENT ENABLE NEW CONFIRM 0123456789 SET CLEAR EXIT 1 Select the numbers that comprise the password 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 49 2 Press the key Tele 3 Select the option Enable 4 Select the value Enable The system locks the password 7 4 Display Setup DISPLAY SETUP OSD SETUP PRIVACY ZONE IMAGE SETUP MOTION FACE LANGUAGE language EXIT From this menu you can set up the on screen display create edit delete a privacy mask change displayed image settings set motion face detection and change the display language 7 4 1 OSD Setup OSD Setup allows you to program how labels are displayed on the monitor and where on your monitor you want to display each label To set up the on screen display 1 From the MAIN MENU select DISPLAY SETUP The submenu DISPLAY SETUP appears 2 Select OSD SETUP The screen OSD SETUP appears Bosch Security Systems Inc 2013 4 50 en On Screen Display OSD Menu AUTDOME 4000 Mini PTZ Do
29. ctions in Bosch protocol AUTDOME 4000 Mini PTZ Dome Preset Key Preset Example Number Function Activate Command Example Deactiv ate Auto Scan 1 On Off Scan 1 ON 1 Enter Auto Scan 2 On Off Scan 2 ON 2 Enter Pre Position Tour On Off Tour 1 ON 8 Enter Group Tour On Off Tour 2 ON 9 Enter Backlight On Off Backlight Comp ON Compensation 20 Enter Enters White On Off WB Setup ON Balance menu 35 Enter Restores Camera On Camera Default ON Settings Restored 40 Enter Enters Main On Main Menu ON Setup Menu 46 Enter Playback A On Off Pattern 1 ON Continuous 50 Enter Playback A On Off Pattern 1 ON Single 51 Enter 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Bosch Protocol en 85 Preset Key Preset Example Number Playback B On Off Pattern 2 ON Continuous 52 Enter Playback B On Off Pattern 2 ON Single 53 Enter Enters Alarm On Alarm Menu ON Menu 64 Enter Acknowledge Off Alarm Action Off Alarms and stopped 65 Enter Deactivate Alarms Displays SW On SW Ver Displayed ON version no 66 Enter Changes to On Off Digital Zoom ON Digital Zoom 80 Enter mode Enters Privacy On Off Privacy Masking ON Masking menu 87 Enter Record A Enters On Off Pattern 1 ON Pattern Setup 100 Enter menu Record B Enters On Off Pattern 2 ON Pattern s
30. d end device features built in video termination then no termination connector is needed Size O D between 4 6 mm 0 181 in and 7 9 mm 0 312 in Shield Copper braid 95 Central Conductor Standard copper center Terminal Male BNC Connector Table 6 3 Recommended Coax Specifications Connecting the Video To connect the video do the following 1 Terminate the coaxial cable from the head end system with a male BNC connector Alternately switch the head end system to 75 Ohm termination 2 Connect the male BNC connector to the Video Out female BNC connector from the base of the camera 6 3 Alarm Connections The camera provides four alarm inputs and one alarm output Each input can be activated by dry contact devices such as pressure pads passive infrared detectors door contacts and similar devices The alarm output can activate an external device such as a buzzer Wire alarms either Normally Open N O or Normally Closed N C you must program the alarm inputs N O the default or N C through the on screen display menus The following table summarizes the maximum distances for alarm wires Bosch Security Systems Inc 2013 4 34 en Connection Wire Size Maximum Distance AW mm Meters Feet G 22 0 64 500 152 4 4 18 1 02 800 243 8 4 Connecting the Alarms Use the following table to connect alarm wires to the 8 pin terminal block fro
31. des and requirements for the grounding electrode Bosch Security Systems Inc 2013 4 10 en Safety AUTDOME 4000 Mini PTZ Dome Disposal Your Bosch product was developed and manufactured with high quality material and components that can be recycled and reused This symbol means that electronic and electrical appliances which have reached the end of their working life must be collected and disposed of separately from household waste material Separate collecting systems are usually in place for disused electronic and electrical products Please dispose of these units at an environmentally compatible recycling facility per European Directive 2002 96 EC Electronic Surveillance This device is intended for use in public areas only U S federal law strictly prohibits surreptitious recording of oral communications Environmental statement Bosch has a strong commitment towards the environment This unit has been designed to respect the environment as much as possible Electrostatic sensitive device Use proper CMOS MOS FET handling precautions to avoid electrostatic discharge NOTE Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostatic sensitive printed circuit boards Fuse rating For protection of the device the branch circuit protection must be secured with a maximum fuse rating of 16A This must be in accordance with NEC800 CEC Section 60 M
32. e R or B gain value to adjust the colors displayed on the monitor To set white balance settings 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 57 1 From the MAIN MENU select CAMERA SETUP The submenu CAMERA SETUP appears 2 Select W Balance The screen WB SETUP appears WB SETUP MODE R GAIN B GAIN SAVE BACK 1 Select the option Mode Select the appropriate value 9 grs oe Auto Trace White balance ATW Aligns the white balance automatically 2 300 to 11 000 K Indoor 3200 K Base Mode Outdoor 5400 K Base Mode Push WB mode The white balance is aligned during key input White balance push auto key Manual WB mode Red and Blue gain values can be set by user O 255 Auto White Balance mode AWB Wide range auto white balance mode In this mode the white balance is performed at a faster operating speed than ATW Select the option R Gain to set the red gain Select the appropriate value Select the option B Gain Select the appropriate value Bosch Security Systems Inc 2013 4 58 en On Screen Display OSD Menu PUOI SOOO Min PTZ Dome 7T Save the settings 7 5 3 AE Setup Shutter speed controls the electronic shutter Set the shutter speed to operate automatically Auto or manually Numeric Value The Automatic Gain Contro
33. e receiver is connected consult the dealer or an experienced radio TV technician for help Intentional or unintentional modifications not expressly approved by the party responsible for compliance shall not be made Any such modifications could void the user s authority to operate the equipment If necessary the user should consult the dealer or an experienced radio television technician for corrective action The user may find the following booklet prepared by the Federal Communications Commission helpful How to Identify and Resolve Radio TV Interference Problems This booklet is available from the U S Government Printing Office Washington DC 20402 Stock No 004 000 00345 4 Informations FCC et ICES mod les utilis s aux tats Unis et au Canada uniquement Ce produit est conforme aux normes FCC partie 15 la mise en service est soumises aux deux conditions suivantes cet appareil ne peut pas provoquer d interf rence nuisible et cet appareil doit pouvoir tol rer toutes les interf rences auxquelles il est soumit y compris les interf rences qui pourraient influer sur son bon fonctionnement Suite diff rents tests cet appareil s est r v l conforme aux exigences impos es aux appareils num riques de Classe A en vertu de la section 15 du r glement de la Commission f d rale des communications des tats Unis FCC et en vertu de la norme ICES 003 d Industrie Canada Ces cexigences visent fournir
34. eed This defines the pan and tilt speed during manual operation of Pan Tilt only 4 Select the appropriate value ON or OFF 5 Select the option Preset Speed This sets the speed when moving to a predefined preset 6 Select the appropriate value Fast Normal Slow 7T Save the settings 7 6 2 Motion Setup This menu controls camera settings such as proportional pan tilt auto flip and over tilt To set these functions 1 From the MAIN MENU select DOME MOTION The submenu DOME MOTION appears 2 Select MOTION SETUP The screen MOTION SETUP appears 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 65 MOTION SETUP PROP PAN TILT AUTO FLIP OVER TILT SAVE BACK Select the option Prop Pan Tilt Select the value On to allow proportional pan tilt when Zoom is set to manual Select the option Auto Flip This is a function that automatically reverses the image when the zoom module passes through the top of the tilt point 90 degrees Select the value On Select the option Over Tilt This function restricts the vertical view angle to a specific operational range to mechanically restrict certain angles Select the appropriate value ModeO Mode Mode 2 Each Mode restricts the vertical minimum tilt to prevent horizontal block on the view from the camera s cover Save the settin
35. et 81 88 No 81 Prese Pattern Preset t 1 Patter n ENT Key Preset 90 No 90 Prese Preset t Run HOME Preset 91 No 91 Prese Preset t CLR Key Preset 92 No 92 Prese Preset t ENT2 Key Preset 94 No 94 Prese Preset t MENU Key Preset 95 No 95 Prese Menu Preset t ESC Key Preset 96 No 96 Prese Preset t D Zoom Preset 97 No 97 Prese Toggle Preset t Notice To save position of the dome press the desired preset number and hold the PRESET key for 2 seconds To go to the MAIN MENU press and hold the MENU key for 2 seconds 2013 4 Bosch Security Systems Inc Bosch Security Systems Inc 850 Greenfield Road Lancaster PA 17601 USA www boschsecurity com Bosch Security Systems Inc 2013
36. etup 101 Enter menu Pre Position Set Preset 1 99 Set Programming 99 Enter Pre Position Shot Preset 1 99 Shot Recall 99 Enter Bosch Security Systems Inc 2013 4 86 en Bosch Protocol AUTDOME 4000 Mini PTZ Dome Preset Key Preset Example Number Set recalibrate Set Run Calibration Set Home Position 110 Enter Restores all Factory Reset Set settings 899 Enter SW Version Number displays 5seconds OSD message D ZOOM in D Z range displays 2 seconds 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome 12 Pelco Protocol The following table lists camera functions in Pelco protocol Pelco Protocol en 87 Preset Key Preset Operation Example Numbe r Preset Preset 1 59 No 1 Preset 101 25 Preset 0 Preset Preset 1 59 T T shortcut 101 25 saving 0 Run PAN Preset 33 No 33 Prese Preset t Run PAN ZERO Preset 34 No 34 Prese Preset t Scan Setup Preset 60 No 60 Prese Preset t Scan Preset Scan 61 68 No 61 Prese Preset t 1 Scan Tour Setup Preset 70 No 70 Prese Preset t Tour Preset Tour 71 78 No 71 Prese Preset t 1 Tour Pattern Setup Preset 80 No 80 Prese Preset t Bosch Security Systems Inc 2013 4 AUTDOME 4000 Mini 88 en Pelco Protocol PTZ Dome Preset Key Preset Operation Example Numbe r Pattern Pres
37. gs Bosch Security Systems Inc 2013 4 AUTDOME 4000 Mini 66 en On Screen Display OSD Menu PTZ Dome 7 6 3 Home Action The Home Action sets the function that the camera should perform after the joystick controller has been idle for predetermined amount of time The Home Action can be set to a preset a tour or auto scan The dwell time can be set from 1 second to 60 seconds and from 1 minute to 60 minutes Notice In order to call an action Preset Pattern Tour or Scan you must configure Preset Pattern Tour or Scan first 1 From the MAIN MENU select DOME MOTION The submenu DOME MOTION appears 2 Select HOME ACTION The screen HOME ACTION SETUP appears HOME ACTION SETUP ACTION NUMBER TIME MODE SAVE BACK 1 Select the option Action 2 Select the appropriate value Home Preset 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome T 8 9 On Screen Display OSD Menu en 67 Scan Tour Select the option Number Set the number for the action For example if Action is Preset and Number is 001 this means Preset 1 Select the option Time This is the dwell time the amount of time that the joystick controller can be idle before the camera returns to Home a preset a scan or a tour Set the desired dwell time from 1 second to 60 seconds and from 1 minute to 60 minutes
38. ication does not cover the performance or reliability of the security or signaling aspects of this product UL MAKES NO REPRESENTATIONS WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT Copyright This manual is the intellectual property of Bosch Security Systems and is protected by copyright All rights reserved Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly Bosch Security Systems Inc 2013 4 16 en Safety AUTDOME 4000 Mini PTZ Dome Note This manual has been compiled with great care and the information it contains has been verified thoroughly The text was complete and correct at the time of printing The ongoing development of products means that the content can change without notice Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults incompleteness or discrepancies between this manual and the product described More information For more information please contact the nearest Bosch Security Systems location or visit www boschsecurity com 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome 2 1 Description en 17 Description This manual is a reference for programming and operating AUTDOME 4000 camera It contains information about featu
39. ions this device may not cause harmful interference and this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules and ICES 003 of Industry Canada These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and radiates radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures If this equipment does cause harmful interference to radio or television reception which may be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures reorient or relocate the receiving antenna increase the separation between the equipment and receiver 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Safety en 13 connect the equipment into an outlet on a circuit different from that to which th
40. l AGC Gain or AGC Max adjusts the brightness of the pictures The brightness increases as the numeric value is set higher SSNR enhances the digital noise reduction properly There are three settings Low Middle High When gain levels raise SSNR will reduce the noise to display a clearer image When Input luminance level is too dark the Digital Slow Shutter DSS function is set higher automatically To set auto exposure settings 1 From the MAIN MENU select CAMERA SETUP The submenu CAMERA SETUP appears 2 Select EXPOSURE The screen AE SETUP appears AE SETUP MODE SHUT AGC GAIN AGC MAX DSS BRIGHT SAVE 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome 7 5 4 On Screen Display OSD Menu en 59 AE SETUP BACK 1 Select the option Mode Auto Exposure AE Mode 2 Select the appropriate values listed in the top row of the table below AE Mode Full Manual SHUT FIX WD Auto R Shutter X O O X 1 1 1 100 000 1 1000 1 1000 AGC Gain 00 36dB X O 06dB X X AGC Max O X O High IO Off Low Mid High default Super High DSS 0x2 0x128FId O Off IX X X Bright 00 15 O 06 X O 06 O gt Save the settings D N Setup The D N Day Night function improves the camera s sensitivity at night or when the brightness level of the ambient environment is low The Day amp Night filter is automatically switched
41. m the camera Number Signal Color 1 NC Yellow 2 COM Orang e 3 NO Green 4 AL3 Blue 5 GND Black ALM 6 AL2 Violet 7 AL1 Gray 8 ALO Brown Table 6 4 8 pin Terminal Block Connections AUTDOME 4000 Mini PTZ Dome 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini Connection en 35 PTZ Dome 6 4 Power Connections Caution The camera unit accepts 24 VAC power only Do not connect 120 V or 230 V to this camera The recommended power cable is a 2 conductor 14 18 gauge cable depending on the distance A W 14 AWG 16AWG 18 AWG 2 5 1 5 1 0 mm mm mm 2A 43 W with 250m 150m 100m heater 820 ft 492 ft 328 ft 6 5 Camera Settings The camera can communicate with external switching devices such as a multiplexer or a DVR by setting the Rotary and Dip switches Refer to the tables below for setting the camera s ID and selecting the protocol The camera s Dip switches can be accessed by removing the dome cover and are located on a PCB attached to the camera base Caution To prevent humidity problems the camera s dome cover must be removed only in dry conditions Caution When re mounting the dome cover to the camera base ensure that each screw has a rubber O ring and that the large rubber O ring is in place on the camera base This ensures protection against water ingress Bosch Security Systems Inc
42. me OSD SETUP LABEL POSITION TIME ZOOM ID MODE ANGLE SAVE BACK CHANGE TO SETUP 1 Select the option Label Position to set change the position of labels Select the value On to display the label position Press the button Tele to edit the position of labels Use the joystick to move the label up down left and or right Save the option Select any of the following labels to display Title Label Position Dwell Time Zoom ratio Camera ID Operation Mode PTZ Angle Note You can display only selected video or characters in the video Each element may be configured 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 51 7 Save the option 7 4 2 Privacy Zone A Privacy mask zone allows an administrator to program a four sided user defined zone which cannot be viewed by operators A maximum of 15 positions can be displayed on the monitor The mask will stay in position even with changing pan and tilt angles and will adjust in size according to the zoom ratio Tele Wide Bosch recommends setting the size of the mask to be at least twice the size height and width of the object being masked The speed of displaying masks is proportional to the number of masks on the screen To set a privacy mask zone 1 From the MAIN MENU select DISPLAY SETUP The submenu
43. mode and 2 Patterns in Bosch protocol mode Each of the user defined scans includes Pan Tilt Zoom To set up program a Pattern From the MAIN MENU select PATTERN SETUP The screen PATTERN SETUP appears PATTERN SETUP NO EDIT TITLE TIME CLEAR SAVE BACK 1 Select the option NO to select a pattern number 2 Select the appropriate pattern number 3 Select the option Edit A second screen PATTERN SETUP appears 4 Using the joystick move to a desired target 5 Press the button Near to begin programming 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini z PTZ Dome On Screen Display OSD Menu en 71 6 Using the joystick record the scene Note that Time means recorded time The maximum amount of time available for recording is 60 seconds 7 Save the settings Note Select the option Clear to delete the pattern Notice You can also edit the Pattern title Select the option Title then edit the title following the steps in Editing Titles page 43 7 9 Tour Setup The camera has a maximum of 8 Tours in Pelco protocol mode and 2 Tours in Bosch protocol mode Each tour can have 28 configurable items Each item can be a pre defined preset pattern and scan in Tour 2 8 Only Presets 28 maximum can be inserted in Tour 1 To set up program a tour gt From the MAIN MENU select TOUR SETUP The screen TOUR SETUP appears TOUR SETUP NO HHH TOU
44. n Connection PTZ Dome 2 9 97 0 o Q Q o Figure 6 1 Typical wiring configuration 24 VAC Power In Power connector with screw terminals Power adapter supplied separately 24 VAC Peak 2 5 A 8 pin I O terminal Alarm In Out 2 pin data terminal RS 485 Connection Video Out Female BNC connector Video In to monitor Male BNC connector CCTV Monitor Bosch keyboard controller 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Connection en 31 Note The box around several objects in the graphic above indicates that those devices are supplied separately 6 1 RS 485 Connections The camera can be controlled by an external device or control system using an RS 485 duplexer The total length of the cable for communication should not exceed 1 km 3937 ft If the distance between the camera and the control room is greater than 1 km 3937 ft Bosch recommends using a repeater not supplied Notice The wire shield must be tied to signal at both ends if 2 wire twisted pair is used Notice When the RS 485 signal is looped through ensure that only the last device is te
45. ng external power supply Camera lens An assembled camera lens in the outdoor housing must comply and be tested in accordance with UL IEC60065 Any output or signal lines from the camera must be SELV or 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Safety en 9 Limited Power Source For safety reasons the environmental specification of the camera lens assembly must be within the environmental specification of 10 C 14 F to 50 C 122 F Camera signal Protect the cable with a primary protector if the camera signal is beyond 140 feet in accordance with NEC800 CEC Section 60 Coax grounding Ground the cable system if connecting an outside cable system to the unit Connect outdoor equipment to the unit s inputs only after this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source Disconnect the unit s input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal Follow proper safety precautions such as grounding for any outdoor device connected to this unit U S A models only Section 810 of the National Electrical Code ANSI NFPA No 70 provides information regarding proper grounding of the mount and supporting structure grounding of the coax to a discharge unit size of grounding conductors location of discharge unit connection to grounding electro
46. ove the dome cover item 6 from the camera base item 3 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Installing a Surface Mount en 27 Notice To prevent scratches on the dome cover Do Not Remove the plastic film protecting the dome cover until after hardware installation is complete 8 Remove the white foam ring from the camera base and remove the white foam sheet from the inside of the dome cover These are for protection during transport 9 Align the four screw holes on the camera base item 3 with the four plastic anchors Caution When re mounting the camera base make sure that each mounting screw has a rubber O ring This ensures protection against water ingress 10 Attach the camera base to the ceiling using the four 8 x 32 screws with O rings attached item 4 Tighten the screws enough to ensure that the camera base is secured to the ceiling 11 Make the necessary Dip Switch settings described in chapter 4 3 Note This step can also be done later but then the dome cover must be re opened Caution When re mounting the dome cover to the camera base make sure that each screw has a rubber O ring and that the large rubber O ring is in place on the camera base This ensures protection against water ingress 12 13 Align the screw holes on the dome cover item 6 with the camera base Attach the dome cover to the camera
47. oving Disconnect the power before moving the unit Move the unit with care Excessive force or shock may damage the unit and the hard disk drives Outdoor signals The installation for outdoor signals especially regarding clearance from power and lightning conductors and transient protection must be in accordance with NEC725 and NEC800 CEC Rule 16 224 and CEC Section 60 Permanently connected equipment Incorporate a readily accessible disconnect device in the building installation wiring 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Safety en 11 Pluggable equipment Install the socket outlet near the equipment so that it is easily accessible Power resupply If the unit is forced to power down due to exceeding the specified operating temperatures disconnect the power cord wait for at least 30 seconds and then reconnect the power cord Power lines Do not locate the camera near overhead power lines power circuits or electrical lights nor where it may contact such power lines circuits or lights Rack mount Ventilation Do not place this unit in a built in installation or rack without proper ventilation or adhering to the manufacturer s instructions The equipment must not exceed its maximum operating temperature requirements Mechanical loading Properly mount the equipment in a rack to prevent a hazardous condition due to uneven mechanical loading SELV All the input
48. propriate tool for cutting a hole in drywall or ceiling tile if applicable 3 3 Accessories The following accessories are available for the camera Bosch Security Systems Inc 2013 4 22 en Unpacking AUTDOME 4000 Mini PTZ Dome Model Description Drawing Number VEZ A4 IC AUTDOME 4000 In ceiling Mount Charcoal color and white color ceiling plate included VEZ A4 PC AUTDOME 4000 Pipe mount Charcoal color AUTDOME 4000 VEZ A4 PW Pipe mount White color 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini Unpacking en 23 PTZ Dome Model Description Drawing Number VEZ A4 WC AUTDOME 4000 Wall mount Charcoal color VEZ A4 WW AUTDOME 4000 Wall mount White color Bosch Security Systems Inc 2013 4 24 en Installation Overview 4 AUTDOME 4000 Mini PTZ Dome Installation Overview The AUTDOME 4000 camera comes with the hardware and installation instructions necessary to mount the camera to a concrete ceiling This following mounting accessories are available and are supplied with separate mounting instructions Wall mount used in applications where the camera is mounted to a vertical wall Pipe mount used in applications where the camera is mounted to a horizontal high ceiling In ceiling mount used in applications where the camera is mounted into a recessed ceiling
49. res commands and operation methods The AUTDOME 4000 is an autofocus high resolution integrated day night camera that is part of a larger building block for any surveillance security system By using multiple keyboard controllers and multiple dome cameras no place is too large for monitoring Extensible andflexible architecture facilitates remote control functions for a variety of external switching devices such as DVRs Features 260X Zoom 26X Effective Optical Zoom 10X Digital Wide Dynamic Range WDR Day amp Night Auto BW Color Pan 360 Endless Rotation Tilt 180 Vector scan 90 when 3D Privacy Masking is enabled 99 210 Preset Positions except Short cut command 2 8 Auto scans 2 8 Patterns 2 8 Tours consisting of Presets Patterns and Scans A4Alarm inputs 1 Alarm output Off N C N O Programmable PTZ Speed Proportional to Zoom ratio changeable preset speed OSD with multiple display languages Privacy mask zones Bosch Security Systems Inc 2013 4 18 en Description AUTDOME 4000 Mini PTZ Dome Notice The AUTDOME 4000 Mini PTZ Dome uses a 30X zoom lens fW 3 49 0 17mm fT 104 02 5 20mm The polycarbonate bubble part of the camera housing causes image distortion reducing the optical zoom performance The effective optical zoom ratio is 26X 10 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ
50. rminated properly Improper RS 485 wiring or termination may result in unreliable system operation Use a 2 wire shielded half duplex differential multi drop with the following attributes Wire Type 2 wire Shielded Twisted Pair Distance 1 2 Km 3937 ft Gauge 0 511 mm 24 AWG Impedance 1200 Table 6 1 RS 485 Wire Specifications The following table shows the terminal connections for the 2 pin terminal block RS 485 connections see page 30 item 5 Bosch Security Systems Inc 2013 4 AUTDOME 4000 Mini 32 en Connection PTZ Dome Number Signal Color 1 TRX Sky 2 TRX White Table 6 2 2 pin Terminal Block Connections Notice When the camera s RS 485 port is connected to a MIC BP3 Biphase convertor the camera s TRX should be connected to the convertor s RxB and TRX should be connected to RxA The camera s baud rate should be set to 9600 and the protocol should be set to Bosch OSRD Also make sure that the camera ID is configured correctly For further details on setting up the MIC BP3 please refer to the separate MIC BP3 Bi Phase Converter Card Installation and Operation Manual 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Connection en 33 6 2 Video Connection Coaxial cable terminated with a male BNC connector is the most common method for transmitting composite video from the camera to a monitor If the hea
51. ropped Bosch Security Systems Inc 2013 4 8 en Safety 1 3 AUTDOME 4000 Mini PTZ Dome Important notices Caution A regulated 24 VAC 43W power supply is recommended for use with this camera for the best picture and the most stable operation An unregulated power supply can cause damage to the camera When unregulated power supply is applied product warranty will be void Bosch recommends using the camera with a monitor that has a CCTV quality 75 Ohm video impedance level If your monitor is switched to high impedance please adjust accordingly Do not attempt to disassemble the camera to gain access to the internal components Refer servicing to your dealer or to qualified service personnel Never face the camera towards the sun or any bright or reflective light This may cause smear on the picture and possible damage to the CCD Do not remove the serial sticker for the warranty service All pole power switch Incorporate an all pole power switch with a contact separation of at least 3 mm in each pole into the electrical installation of the building If it is needed to open the housing for servicing and or other activities use this all pole switch as the main disconnect device for switching off the voltage to the unit Camera grounding For mounting the camera in potentially damp environments ensure to ground the system using the ground connection of the power supply connector see section Connecti
52. s stoves or other equipment including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer When a cart is used use caution when moving the cart apparatus combination to 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Safety en 7 avoid injury from tip over 10 Unplug this apparatus during lightning storms or when I unused for long periods of time This will prevent damage to the unit from lightning and power line surges 11 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in a way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been d
53. tain alarm activation continuously until it is stopped manually 96 preset in Pelco protocol Off 65 Enter in Bosch protocol 14 Save the settings Note Select the option Clear to delete the alarm Bosch Security Systems Inc 2013 4 AUTDOME 4000 Mini 76 en On Screen Display OSD Menu PTZ Dome Notice In order to call an action Preset Pattern Tour or Scan you must save Preset Pattern Tour or Scan first 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini 2 PTZ Dome Troubleshooting en 77 8 Troubleshooting If problems occur check the installation of the camera with the instructions in this manual Refer to this guide for further information Problem Solution No video on screen Verify that the power is connected to all components in the system Verify that the power switch is ON Verify the status of cables or the connection of cables Poor video quality Check the power supply voltage normal 24 VAC directly at the camera Check the camera settings Check the video quality directly at the camera with a service monitor Check the quality and length of video cables and possible EMC interference Check the quality of connectors and potential moisture corrosion If the lens or the dome window is dirty clean it with a clean cloth Bosch Security Systems Inc 2013 4 78 en Troubleshooting AUTOT ME OOO MIN
54. te Une telle modification est susceptible d entra ner la r vocation du droit d utilisation de l appareil Au besoin l utilisateur consultera son revendeur ou un technicien qualifi en radio t l vision qui proc dera une op ration corrective La brochure suivante publi e par la Commission f d rale des communications FCC peut s av rer utile How to Identify and Resolve Radio TV Interference Problems Comment identifier et r soudre les probl mes d interf rences de radio et de t l vision Cette brochure est disponible aupr s du U S Government Printing Office Washington DC 20402 tats Unis sous la r f rence n 004 000 00345 4 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome Safety en 15 1 5 Bosch notices Danger TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Caution This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Disclaimer Underwriter Laboratories Inc UL has not tested the performance or reliability of the security or signaling aspects of this product UL has only tested fire shock and or casualty hazards as outlined in UL s Standard s for Safety for Audio Video and Similar Electronic Apparatus Safety Requirements UL 60065 UL Certif
55. tup The camera has a maximum of 210 programmable preset positions Each of the user defined presets includes Pan Tilt Zoom To set up program a preset gt From the MAIN MENU select PRESET SETUP The screen PRESET SETUP appears PRESET SETUP EDIT 2013 4 Bosch Security Systems Inc AUTDOME 4000 Mini PTZ Dome On Screen Display OSD Menu en 69 PRESET SETUP TITLE D TIME CLEAR SAVE BACK Select the option NO to select a preset number Select the appropriate preset number Select the option Edit A second screen PRESET SETUP appears Using the joystick move to a desired target Pan Tilt Zoom Save the settings Return to the previous screen Select the option D Time to set the dwell time for the preset Set the desired dwell time from 3 to 60 seconds Save the settings Note Select the option Clear to delete the preset Notice You can also edit the Preset title Select the option Title then edit the title following the steps in Editing Titles page 43 Bosch Security Systems Inc 2013 4 70 en On Screen Display OSD Menu AUTDOME 4000 Mini PTZ Dome 7 8 Pattern Setup A Pattern is used to display or recall a memorized repeated and serial trace of pan tilt and zoom The camera has a maximum of 8 Patterns in Pelco protocol
Download Pdf Manuals
Related Search