User`s Manual GRID DISH REFLECTOR
Contents
1. assemly a O Metal wrap d Bolt and Nuts D6xL60 mm 2 pcs D6xL35mm 2 pcs D6xL23mm 4 pcs Assembly 1 Align the Front plate Grid Dish Right Angle plate and the backplate 2 Insert the 4 pieces of bolt on the four holes to hold the four parts together 2 D6xL60mm bolts 2 D6xL30mm bolts 4 D6xL23mm bolts 5 3 Tighten the nut until the four plates hold firmly 4 Remove your Antenna from the old mast and take note of the direction of the front 5 Locate the front of the antenna and draw a cross hash 15mm from the top of the lateral vertical center Use a pencil to mark this point 6 Mount the Antenna on the U boom with the front surface area facing the center of the Grid 7 Align the cross hash so that it will align with the center of the Grid dish 8 Mount the antenna firmly on I ne LEH the U boom by using the LUCE I TATIN supplied Antenna metal Wrap M TTT iag 10 The Grid dish should be similar with the antenna direction of your original antenna 11 Tighten the U clamp to hold the Dish Grid system Note The antenna now is reversed from the original position2. RCA GDRO01 26 Roughclasy GRID DISH REFLECTOR User s Manual 10 The Grid dish should be similar with the antenna direction of your original antenna 11 Tighten the U clamp to hold the Dish Grid system Note The antenna now is reversed from the original position Tools Make sure to have the following tools when assembling your Grid Disk Reflector Bolt wrench Screw driver Ladder Before you begin TURN OFF ALL POWER connecting to the antenna system Assembly 1 Align the Front plate Grid Dish Right Angle plate and the backplate 2 Insert the 4 pieces of bolt on the four holes to hold the four parts together 3 Tighten the nut until the four plates hold firmly 4 Remove your Antenna from the old mast and take note of the direction of the front 5 Locate the front of the antenna and draw a cross hash 15mm from the top of the lateral vertical center Use a pencil to mark this point 6 Mount the Antenna on the U boom with the front surface area facing the center of the Grid 7 Align the cross hash so that it will align with the center of the Grid dish 8 Mount the antenna firmly on the U boom by using the supplied Antenna metal Wrap 9 With all the Dish system assembled mount the Grid dish system on the mast Parts Check List Make sure your package includes the items shown below Grid Dish Mast Clamp Right Angle Plate U Boom_Backplate
Download Pdf Manuals
Related Search