BEETLE /iSCAN Tower Line 50 Self Checkout System
Contents
1. h f 7 3 A V 4 h A y i y h 4 4 The BEETLE iSCAN Tower Line 50 was designed according to the Wincor Nixdorf standard Environmentally Conscious Product Design and Development The BEETLE iSCAN Tower Line 50 is manu factured without the use of CFCs and CCHs and is manufactured to a great extent of materials and components which are recyclable For recycling purposes do not attach any additional adhesive labels to the device Wincor Nixdorf disposes of old devices in a environmentally responsible manner at a re cycling center that is ISO 9001 and ISO 14001 certified as is the entire company Follow your local regulations on the disposal of toxic waste such as the system ribbons Your Wincor Nixdorf vendor will answer any questions you have concerning returns re cycling and disposal of our products 22 Wincor Nixdorf International GmbH D 33094 Paderborn Order No 01750234511A2. customer responsibilities is given in this manual Installation as well as connection of BEETLE iSCAN Tower Line 50 may only be executed by technically trained personnel The safety instructions given in this document should be strictly followed when handling BEETLE iSCAN Tower Line 50 Further safety installation and maintenance instructions can be found in the manuals supplied with the components In case of doubts or questions please contact Wincor Nixdorf International WN Warranty Warranty Wincor Nixdorf guarantees generally a warranty engagement for 12 months beginning with the date of delivery This warranty engagement covers all damages which occur despite a normal use of the product Damages because of improper or insufficient maintenance improper use of the product or unauthorized modifications of the product inadequate location or surroundings will not be covered by the warranty For further information on the stipulation consult your contract All parts of the product which are subject to wear and tear are not included in the warranty engagement For detailed warranty arrangements please consult your contract documents ESD Electrostatic Sensitive Devices A Assemblies containing electrostatic sensitive devices ESD may t A be labeled with this sticker When installing an assembly or drive please follow the guidelines below which apply to all electro static sensitive devices ESD Make s
3. 0 must be fix on the floor with 3 screws M5 x 30 Cascading the Tower Line 50 Cascading the Tower Line 50 Materials needed au Je Self locking nuts Sperrzahnmuttern M5 x 5 01750000117 Cable protection SBPE9 161 41200 P N 3249207050 UL94 HB Information sheet Instruction for cascading two systems this document 10 Cascading the Tower Line 50 Instructions Take the HPL sideboard with prepared breakthroughs Hit away the breakthroughs of both sideboards that shall be connected Deburr the rest cover material laminate 4 Put the cables LAN power cord through the hole and protect them with the cable protection Fix cable protection with a cable strap so that it cannot slip away and really protects the cables running through the hole fixed cable strap 11 Connecting the System Connecting the System Start up The power supply system must be equipped with separately guided protective earth conductor PE This kind of electricity system is known as TN S network Do not use PEN conductors Ratings of BEETLE iSCAN Tower Line 50 220 V 240 V 50 60 Hz 2 9A 110 V 120 V 50 60 Hz 3 5A Find the rating of your device on the type label see arrow at the picture below AN Caution Check that the set nominal voltage of the appliance corresponds to the local mains voltage Povver Connection and LAN Support The BEETLE iSCAN Tower Line 50 s
4. APPAREIL ALASER DE CLASSE 1 LASER KLASSE 1 PRODUKT LASER CLASE 1 PRODUCTO CAUTION CLASS 2 LASER ng oo OPEN DO NOT lige INTO THE BEAM ATTENTION RAYONN EMENT LASER CLASSE 2 LORS DE L OUVERTURE NE PAS REGARDER FIXEMENT DANS LE FAISCEAU VORSICHT KLASSE 2 LASERSTRAHLUNG WENN ABDECKUNG GEOFFNET NIICHT IN DEN STRAHL BLICKEN CUIDADO LUZ LASER CLASE 2 AL ABRIR NO FIJAR LA VISTA EN EL RAYO Warranty VOID if case opened Contains no user serviceable components Tools you need Tools you need Keep the following tools at hand for working on the BEETLE iSCAN Tower Line 50 Socket wrench 5mm Allen screw H3 H4 H5 Jay wrench 5 5 7 8 mm and 17 mm adjustment Flathead screwdrivers two sizes Phillips screwdrivers Flathead screw driver Torx screwdrivers hexagon round screwdrivers Customer Requierements Customer Requirements Before BEETLE iSCAN Tower Line 50 installations can be started the customer is held responsible to provide the following N If more than ten Self Checkout Systems Lanes are to operate in one configuration they have to be connected to a network via an ISCAN server with a performance matching the requirements e Appropriate drawings concerning location of the equipment as well as site wiring power and communications paths and lengths Location of other equipment that may generate electrical noise electromagnetic interference or heat e Provision and installation of all communica
5. Certifications of the Manufacturer 2004 108 EC with regard to Electromagnetic Compatibility and This device complies with the requirements of EMC directive C 2006 95 EC Low Voltage Directive Therefore you will find the CE mark on the device or on its packaging Important Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense FCC Class A Declaration This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 ofthe FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Modifications not authorized by the manufacturer may void users authority to operate this device This class A digital apparatus complies with Canadian ICES 003 Cet appareil numerique de la classe A est conforme a la norme NMB 003 du Canada 21 Appendix Recycling the BEETLE iSCAN Tower Line 50
6. WINCOR NIXDORF A a pis ZEITEN ELISE TE Site Preparation Important Notes and Commissioning All product names mentioned in this document are registered trademarks Copyright Wincor Nixdorf International GmbH 2012 All rights including the rights to the translation reprinting and transmission or copying by any means in whole or in part are reserved Offenders will be liable for damages All rights including rights resulting from a patent grant or registration of a utility or design are reserved Contents A Ul GTI T re ar taster ret ener tare rad ts Nereis eters da de tt Pa see eee 1 ADOUFE Man ls wsntudencawauslnasinensiansecedben NRA ONE 1 NN OTTO EV ee ee ee ee uname g ee 2 ESD ElEELF statie Sensitive DEVICES usd ein 2 IMPORINt NOTES nee Ri eins 3 COnnectine Peripherals sicario 4 Note ON Laser nina innne a T ee DNS oa Federer GREN SoA TONAS Baer re R ROR NORR 4 TOOISVOLAN CE Client vsk and svearnas A A ee 5 Customer Requirements lid 6 COMPONEN Eee esse dEo 7 Unpacking and Checking the System sii 8 Installing the Tower Line 50 in the Store ass en ee u Hae eee 9 Fixing the DeVvicecal the FOO esse 9 Cascading the Tower LNE SO ausser 10 Materials SC CCC a i n 10 Melo ta 11 Conhectine tre SY TOM men 12 SA UP 12 Power Conhectionanda LAN SUDDONE end dessa ae 12 Disconnecting the System from the Mains uessessessessesnnnsnesnennennennnnnnnnennennnnnnnnnennnnnennennnnnenn 14 APPENA cane ctr ern A 15 F rt
7. her DOCUMENTATION stenar gar n dra Sh ht N 15 EIlSan mz lnstructions aa 15 Mamnlenanc and SOI VICE ij zana dad 15 Approved Cleaning WMatertalS soii 16 BEETLE iSCAN Tower Line 50 Dimensions ccooocccnnnccnnonoccnonoccnnnnanononicononnnnononanononarinnnniness 16 Environmental CONCIION Suceticaa tddi 20 Certifications of the manufacturer a 21 FCC Class Ay Declara N msi 21 Recycling the BEETLE SCAN Tower Line 50 aaa aaaaaaaaa aaa aaa aaa aaa aaa eee eee nenen eee neneve ve eee eee 21 Introduction Introduction The BEETLE iSCAN Tower Line 50 is a terminal that offers the customer to handle the purchase by scanning bagging and paying the items on his own In case of problems an attendant is available for quick support BEETLE iSCAN Tower Line 50 offers the following main functions Record function records items the customer wants to buy Control function secures the recording of all items Payment function payment may be effected by banking cards customer cards and accounts About this manual This manual refers to technically trained personnel only It provides all necessary site preparation information for installing BEETLE iSCAN Tower Line 50 at the site i Notes are marked by this symbol AN Caution Identifies action requiring caution The responsibility for all technical and special prerequisites for installation of BEETLE iSCAN Tower Line 50 is borne by the customer A detailed list of
8. icles 400ml bottle without a valve 70cm hose Cloth with ISOPROPYL 1000 01750104065 Pure isopropyl alcohol for cleaning pieces displays Cleaning card 01750016388 For cleaning magnetic heads and chip contacts in ID card readers Please note the manufacturer s specifications on the packaging and on the information sheet included in the packaging The product may be damaged or soiled if materials are used that are not approved or if they are used improperly 16 Appendix BEETLE iSCAN Tower Line 50 Dimensions mm Appendix Appendix N LN Area of front door Appendix Environmental Conditions Operating Conditions EN 60721 3 3 Class 3k3 Climate test according to IEC 68 EN60068 Ambient temperature SCS 35 C Humidity 5 r h 1 g m 85 r h 25 g m Temperature change 0 5 K min max 7 5K 30 min Barometric pressure 70 kPa 106 kPa Installation environments vvith long periods of sunshine should be avoided Storage Conditions EN 60721 3 1 Class 1k2 Climate test according to IEC 68 EN60068 Ambient temperature 5 C 40 C Humidity 5 r h 1 g m 85 r h 25 g m 0 5 K min Temperature change 0 5 K min max 7 5K 30 min Transport Conditions EN 60721 3 2 Class 2k2 Climate test according to IEC 68 EN60068 Ambient temperature 25 C 60 C Humidity 15 r h 1 g m 98 r h 32 g m Temperature change 25 C 25 C 20 Appendix
9. ing acetic acid Use a soft fine meshed cloth to clean the surface Dampen the cloth slightly and then clean the screen Wrong maintenance may cause damages to the screen which are not covered by guarantee or warranty Maintenance and Service When carrying out work on the components and modules that carry an electrical charge this equipment must first be disconnected from the power supply Besides switching off the power switch on the power distributor the safety plug must be disconnected from the power distributor Device Housing Clean the housing with a vacuum cleaner or cloth Eliminate damage to paint if necessary and possible 15 Appendix Approved Cleaning Materials The items listed below can be ordered from Wincor Nixdorf branch office or your Wincor Nixdorf sales partner Product Name Order Number Explanations Professionell cleaning set for 01750097335 For cleaning and maintaining EDP devices keyboards and varnished and 100ml plastic cleaner in a plastic coated housings pump bottle 50 dust cloths 10 keyboard swabs for places difficult to reach Damp cleaning cloths 01750097332 For cleaning and maintaining Dispenser box with 100 cloths delicate EDP devices keyboards and housings Dry cleaning cloths 01750097334 For cleaning display panes Antistatic and fluff free Pack with 300 cloths Compressed air spray 01750097331 Cleaned compressed air CFC free PRESSAIR for removing loose dust and dirt part
10. is type of Important Notes electrical supply network is referred to as a TN S network Do not use PEN conductors Also follow the recommendations set forth in DIN VDE 0100 Part 540 Appendix C2 as well as EN50174 2 5 4 3 National Electrical Code ANSI NFPA 70 2005 and Canadian Electrical Code Part I CSA C22 1 02 This will help prevent malfunctions When working on the cutter of the printer the device must be turned off Always keep the ventilation slots free of obstruction to ensure adequate air circulation and avoid overheating Transport the appliance only in its original packaging to protect it against knocks and bumps Ifa lithium battery is supplied with the appliance ensure that the battery is replaced with an equivalent type Otherwise there is danger of explosion Lithium batteries may only be replaced with identical types or other types recommended by the manufacturer Batteries must be disposed of according to local regulations on the disposal of special waste Connecting Peripherals Use only shielded cables when connecting devices to the system to ensure compliance with international Rules and Regulations for radiated emission as well as to achieve a high immunity against external disturbances Note on Laser The barcode readers contain a light emitting diode LED classified according to LASER CLASS 1 Laser Laser Class 1 IEC 60825 1 2007 A1 A2 EN 60825 1 2007 A1 A2 CLASS 1 LASER PRODUCT
11. lways lay the supply leads and cables in such a way that they cannot be stepped on or tripped over Only touch green marked handles and knobs for moving parts Exchange damaged cables immediately In order to completely disconnect the device from the power source turn the device off and use the separator in the fuse box building installation Make sure that no objects such as paper clips can reach the interior of the device since electrical shocks or short circuits could result To avoid overheating of the power supply unit Ensure that the BEETLE iSCAN Tower Line 50 receives adequate ventilation During an electrical storm data cables should not be plugged in or unplugged Keep the device away from vibrations airstreams ventilations dust humidity and heat Ensure that used parts are disposed of in an environmentally friendly manner Incase of an accident such as a damaged housing entry of liquids or foreign objects switch the device off and use the separator to completely remove the device from power BEETLE iSCAN Tower Line 50 is the result of state of the art technology Therefore please also ensure that the BEETLE iSCAN Tower Line 50 is operated under modern building and technical conditions in order to ensure flawless and efficient operation The appliance and other information technology hardware should only be connected to electrical supply networks with a separate protective earth wire PE Th
12. tion cables wall jacks special connectors and associated hardware e Provision and installation of necessary power distribution boxes conduits grounds lightning protection devices and associated hardware e Ensure that all applicable codes regulations and laws including but not limited to electrical building safety and health are adhered to e Provision and installation of auxiliary power or other equipment as required e Provision of storage or service as required e Provision of a level floor to locate the BEETLE iSCAN Tower Line 50 The system has to be stable and must not tilt The maximum incline must not exceed 2 The feet of the unit can overcome a height difference of up to 10mm e Provision and installation of floor coverings and environmental systems that limit or control static electricity build up and discharge e Provision of appropriate equipment for the remote support The customer is responsible for relocating the Self Checkout equipment check stand and components to the final placement installation position Keep the Wincor Nixdorf equipment area free from dust smoke lint and other particles Restrict smoking eating and drinking around the equipment Avoid locating the equipment near other machines that generate ink carbon and paper dust particles i Please note that Wincor Nixdorf will not take over any warranty liability in case the technical and environmental requirements are not met Componen
13. ts Components Unpacking the System Unpacking and Checking the System Unpack the system and verify that the scope of delivery is identical to the information on the delivery ticket Should you notice any transport damages or discrepancies between package contents and delivery ticket or functional defects please inform your contracting parties or the branch office of Wincor Nixdorf immediately Please indicate the number of your delivery ticket and delivery ticket position and serial number of the respective device i It is absolutely necessary to check the function of the original equipment before you perform any changes e g by installing an expansion card Only then it is possible to accept a functional defect as a claim i We recommend to save the original packaging for transport at a later time protection from impact and shock Installing the Device in the Store Installing the Tower Line 50 in the Store The BEETLE iSCAN Tower Line 50 will be delivered on a pallet with a size in industry standard 800 mm x 800 mm First remove the wrapping paper N Caution Always wear safety gloves and safety shoes with steel toe caps while transporting heavy appliances N Caution Tilt the device max 15 very carefully at the edge of the pallet and set it up at the designated site Ensure that the installation site has the required load carrying capacity Fixing the Device at the Floor The Tower Line 5
14. upports Ethernet 10 100 BASE T local area network LAN communication protocol The BEETLE iSCAN Tower Line 50 terminal provides a female RJ 45 connection port for the LAN A 6 foot LAN cable is provided with the system Unlock and open the front door of the BEETLE iSCAN Tower Line 50 12 Connecting the System Guide the Power and the LAN cable through the hole see arrow Plug the power cable at the BEETLE M Il plus see arrow and the system will automatically start up Also plug the LAN cable After starting up the system you will see the start screen of the operating system at the display 13 Connecting the System Disconnecting the System from the Mains At first shut down the system by the software application Switching off the device is the same procedure like switching on but in reverse order 14 Appendix Appendix Further Documentation You will find the Hardware User Manual on the Internet The service documentation will be available on the Wincor Nixdorf Intranet only Cleaning Instructions Always turn off the system before cleaning The glass surface of your Touch Screen should be cleaned with a mild abrasive free commercially available glass cleaning product All pH neutral materials pH 6 to 8 are good for cleaning Cleaners with pH values 9 to 10 are not recommended Cleaning with water and isopropyl alcohol is possible as well Do not use solvents contain
15. ure you are not carrying a static charge before working with components marked as ESD by first touching a grounded object such as a radiator from a hot water heating system All tools and devices you use must be free from static charges Always unplug the power cord before installing or removing any assemblies Always handle assemblies by their edges Never touch the terminal pins of the circuits on an assembly Important Notes Important Notes Appliances supplied by Wincor Nixdorf International GmbH comply with the respective safety regulations for data processing installations and information technology installations including electrical office equipment for use within an office environment Whenever work of any kind is done on the device as well as when data cables are plugged and unplugged the device must be completely disconnected from the line voltage Appliances may only be repaired by authorized technicians Unauthorized opening of the housing or inexpert repairs can result not only in considerable personal danger but will also invalidate your warranty and liability protection Always consult the enclosed documentation before doing any work with this appliance If this device is brought from a cold environment into a heated place of business condensation may occur Before operation the device must be completely dry Therefore an acclimatization period of at least two hours must be adhered to A
Download Pdf Manuals
Related Search