User Manual - Walker
Contents
1. Possible cause The brake surface or pad is worn out or the cable has stretched Action Adjust the brakes cable tension as described in chapter above Brake Adjust ment Problem The wheel is loose Possible cause The wheel has not been correctly installed Action Check that the push button locks correctly Please contact your service pro vider if the wheel does not lock correctly in position manufacturing Material Frame Handlebar Front fork Telescopic stay Wheels Basket Seat Accessories Art no WSE SCO 7105 BLA WW WSE SCO 7105 BLA WW WSE SCO 7105 BLU RW WSE SCO 8101 BLA WW WSE BAS 8101 BLA OW WSE BAS 8101 BLU RW Spare Parts Art no WFR HWA 1302 WFR HIT 1304 WFR HLN 1305 WFR TCP 1308 WFS TFS 4100 Welded T6 aluminium Welded T6 aluminium Press cast aluminium Aluminium profile Plastic rim with rubber tires Polyester textile Polyester textile Description Colour Seat cover Black white white Seat cover black orange white Seat cover Blue red white Basket Black white white Basket black orange white Basket black red white Description Hinge washer 2 piece set Hinge tube compete with bearings Hinge locknut complete with screw Hinge top cap Telescopic folding stay Art no Description WTS TKB 4107 Telescopic knob WBA BFS 8102 Basket frame stay WBA BFM 8103 Basket frame mount WGB STS 2304 Turning knob for handlebar WGB FRG 2307 Front rubber grip set of 4 WGB ECA 2309 En2. Folding the Rollator 1 Pull the seat backwards 3 Simultaneously lift and fold 4 Press the other button on one frame half against the the left of the telescopic stay 2 Press the button on the right other of the telescopic stay 5 To fully fold the rollator simultaneously lift and fold one frame half against the other Motion Brake To operate the motion brake pull the brake lever upwards Brake with both levers at the same time Parking Brake 1 Push the locking button at the front of the handle forward using your index finger Keep the button pushed forward while pulling the brake lever upwards 2 Release the locking button then the brake lever Make sure the locking mechanism is fixed in position Make sure the rol lator does not move 3 To release the parking brake brake in the same manner as for the motion brake Use the Parking Brakes Always lock both parking bra kes before sitting down on the seat Ki bj Removing installing the Basket 1 Wrap the back Velcro flap from underneath between the frame and the basket rail Fold inwards and fix the Velcro sec The loading volume of the Trionic Walker s basket is 22 litres It has a small com partment at the rear end for valuables and smaller objects such as keys The Walker bas ket is removable fixed with Velcro sections to the frame s basket rail tions on the inner of the basket lining 2 Attach th
3. NAA JA 4 tre of the wheel and press the wheel axle into the axle hole Release the button when the wheel is in its end position 3 Hold the tire and pull the wheel back and forth laterally to check if the wheel is prop erly secured it aes lt Removing installing the Front Wheel Air Pressure The front wheel suspension 2 To remove the entire front hole placed under the frame Check the air pressure in the is completely removable to wheel lift the frame s front Release the black push button tires regularly simplify transportation of the from the surface while pulling Walker the front wheel downwards Check that the front wheel Maximum tire air pressure is suspension is secured by lift 2 5 bar 35 psi 1 Press the black button under 3 To install the front wheel ing the frame s front from the the front hinge to release the lift the rollator s front press surface and pulling the wheel front wheel the black button and push mount downwards the wheel axle into the axle ni as Sea 24 The Trionic Walker has a front wheel suspension with capac ity to overcome obstacles up to 13 cm high The wheel has two different adjustments one to use in irregular terrain and one for city environments There is an adjustment handle on the front wheel placed in Change Front Wheel Setting the middle that can be shifted between these two settings 1 Turn the front wheel for easier access to the adjust ment handl
4. User Manual Walker User Manua Dear user Thank you for choosing our product We truly hope you will experience many pleasant moments and enjoy your Trionic Walker both offroad and in the city Choosing the Trionic Walker opens up a whole new range of possibilities that will hopefully increase your quality of life and accessibility to different outdoor environments Please read the User Manual carefully before use and follow all the guidelines especially the Safety Instructions The rollator is primarily made for outdoor use Trionic Walker The Walker has a unique 3 wheel design but as you can see it has in fact four wheels It s aimed to be used as a walking aid mainly for users who desire to be physically active outdoors Developed with a focus on walking and facilitating access for the user the Walker is one of a kind Trionic Walker s main charac teristic is a dual front wheel with capacity to overcome obstacles up to 13 cm high Also compared to a traditional wheel a lot less force is required to overcome lower obstacles The 3 wheel design coupled with the front wheel s suspension and air tires increases comfort and accessibility on all uneven surfaces The Walker is tested and approved according to the International Standard ISO 11199 2 2005 for a maximum user weight of 150 kg The Product Technical Information Min height Max height Width Length Seat height Seat width Wheel dimensi
5. d plug for handlebar WFS EST 3107 Elastomer bumper for front wheel mount WFS EBR 3210 Elastomer stopper for front wheel axle WWH ORA 5103 Quick release axle for wheels Replaceable Wear Components Art no Description WBR BCO 6105 Brake collar WBR BSU 6104 Brake surface WBR BCC 6109 Brake cable w housing WBR BLE 6106 Brake lever WWH WHE 5100 City wheel complete with tire and inner tube WWH WHE 5101 Terrain wheel complete with tire and inner tube WWH TYR 5102 Tire for city errain dimension 12 x x 2 WWH TYR 5103 Tire for rough terrain dimension 12 x 2x 24 WWH ITU 5102 Inner tube dimension 12 x 2x2 14 WGB EGR 2308 Main ergonomic rubber grip set of 2 pieces Trionic Sverige AB Stora W sby G a Stallet SE 194 37 Upplands V sby SWEDEN www trionic biz info trionic se Telephone 08 522 100 50 Fax 08 522 100 59 Corp ID 556698 1527 VAT Reg No SE556698152701 LURKING Foto John van Leer
6. e Lift the frame s front end Pull the adjustment handle outwards to adjust the wheel and slide the adjustor to the desired position either upwards or downwards to its end position 2 Release the adjustment han dle when you have obtained the desired position Irregular terrain Upper position Increased climbing capacity suspension on uneven surfaces and a higher directional stabil ity Its more difficult to steer but has better characteristics for offroad use City Environment Lower posi tion Easy turning with kept climbing capacity Removing installing the Seat The Walker s sliding seat is comprised of a seat base and 1 Hold the cover with the text Trionic to the right Wrap the long flap between the telesco 2 Attach the three front push buttons of the long flap to the a removable cover fixed with nine push buttons pic stay and the seat base 3 Press the three push buttons on the short flap onto the seat base 4 Finally press the three last push buttons of the long flap onto the short flap Safety Instructions Before use check that the Trionic Walker functions properly Check the function of the motion brakes as well as the parking brakes Make sure the frame is correctly unfolded e Check that the handlebar is positioned at the correct height and properly locked Avoid contact with the front end when unfolding the frame as there is a risk of pinching The us
7. e front Velcro flaps in the same manner 3 Ifnecessary adjust the Velcro sections to ensure that the basket is properly fastened Brake Adjustment 1 If the brake functions poorly loosen the adjustment screw on each brake lever counter clockwise and lock it by screw ing the lock nut towards the handle clockwise Contact your health care tech nician or the person respon sible for servicing your Tri onic Walker if the brakes still function poorly Handlebar Adjustment 1 Release both turning knobs hanging freely Use help to by unscrewing them counter measure clockwise NOTE The easiest way to 2 Adjust the handlebar to adjust the handlebar is sitting the required height the most on the rollator s seat this way adequate being the distance you can see the number mark from the wrist to the ground ings clearly thus simplifying when standing with the arms height adjustment 3 Lock both turning knobs by NOTE The turning knob can screwing them clockwise until be replaced with s screw and they are firmly fastened nut if there is a risk that the user accidentily unscrews the handle while using the rollator Be stan Removing installing the Rear Wheels The rear wheels are removable to simplify transportation of the Walker 1 To remove the wheel press the black button at the centre of the wheel and pull the wheel off 2 To mount the wheel press the black button in the cen y
8. er s weight may not exceed a maximum of 150 kg Do not use the Trionic Walker as a wheel chair or for transporting people The Walker is aimed to be used as a walking aid mainly for outdoor use e A annual control of the product is recommended to ensure its function either by a distributor or service provider approved by Trionic Do not use a defect Walker Service Instructions In order to maintain function and safety you should make sure the following is carried out regularly e Clean the rollator with normal dishwashing liquid water and a dishcloth Make sure it s properly dried Keep the wheels clean with dishwashing liquid water and a plastic brush e Check that screws and levers are tightened properly e Ifyour Walker is not in perfect condition please immediately contact your health care technician or a person duly authori zed to service a Trionic Walker Trionic does not take responsibility for any alterations adjust ments or inadequate repairs done to the product without prior authorization Guarantee Trionic Walker has a 2 year guarantee valid from the invoice date The guarantee is only valid for Trionic s original parts parts not cause for wear Serial Number Date Stamp Signature CE Trionic Sverige AB ensures that the above mentioned pro duct meets the relevant legislation requirements 1993 584 con cerning medical products as well as the specifications contained in the provisions f
9. ompartment bles such as wallet keys or a small handbag The basket is 1 Product Registration Card made ofresistant and water repellent textile Available in 1 Delivery Check Card three colour options blue red white black orange white or black white white Hand wash 30 C First Time Use 1 Mount the wheels in the frame s rear axle holes by press ing the black button in the cen tre of the wheel and then push ing the axle all the way into the axle hole Release the push button 2 Check that the wheel is properly attached by pulling it sideways 3 Mount the front wheel to the front bottom end of the frame in the same manner i e press the button at the bottom of the axle and press the axle into the axel hole from underneath Release the push button 4 Check that the wheel is securly fastened by lifting the frame from the surface and pulling the front wheel down wards 5 Adjust the height of the handlebar as described in Chapter Handlebar Adjust ment Walking Mode 1 Unfold the rollator by pull ing the handles sideways away from each other 2 Check that the rollator locks in walking mode when unfold ing make sure you hear a click from the telescopic stay lock ing into place 3 The seat can be slid forward and backward Push forward to obtain more walking space Before using the seat acessing the basket or folding the rolla tor pull the seat backwards
10. on Weight Weight without wheels Max user weight 760 mm 940 mm 765mm 1 030 mm 580 mm 445 mm 310 x 55mm 12 5 kg 7 7 kg 150 kg Safety Before walking with the rollator make sure it s completely unfolded It is not permitted to stand on the rollator or use it for transporting people The maximum load of the basket is 5 kg evenly distributed The rollator may tip over if the basket is loaded differently Both brakes must be locked in parking mode when seated NOTE Do not use the Trionic Walker as a wheel chair or for transporting people Be extra careful on slanted surfaces Items should only be transported in the basket or on the seat When unfolding the rollator to walking mode beware of the risk of pinching Complete Delivery Walker Accessories The following components should be included in the package Seat cover you have received The seat cover is made of resistant and water repellent tex 1 Trionic frame complete with handle bar brakes parking tile It is easily mounted on the seat with push buttons Avai brake seat and basket lable in three colour options blue red white black orange 1 front wheel suspension with Trionic Walker s patented white or black white white Hand wash 30 C Climbing Wheel 2rear wheels with Quick Release axle and brake hub Basket lt TUser Mantal The basket has a zippered compartment ideal to store valua 1 Quick Guide preferably kept in the basket c
11. or medical products LVFS 2003 11 The pro duct meets the specifications in EC s directive regarding medi cal technical products 93 42 EEC Label The Walker is tested and approved according to the provisions in the international stan dard for walking aid products ISO Ma 11199 2 2005 Walking aids manipulated with both arms The user s weight may not exceed 150kg Aid Product Code EAN 13 N Stora Wasby G a Stallet Manufacturer SE 194 37 Uppl V sby SWEDEN www trionic se info trionic se Tel 46 8 522 100 50 Fax 46 8 522 100 59 Max user weight offi Max Weight 150 kg Width of Width 76 cm Length Length 102 cm oe Height 74 96 cm ximum and Minimum tell Height lofii 2007 09 Manufacturing Date SN 200709 000100 Serial Number Primarily for outdoor use Read the manual ISO 11199 2 2005 before use According to ISO standard it is primarily for outdoor use 030023 350038 Article Number TZ approved according to MART no TRI WAL 003 93 42 EEC he oe CeO Environmentally Friendly The Trionic Walker is manufactured in the way to have as little negative impact on the environment as possible during its lifecy cle When the product has served its purpose it can be scrapped and the parts can be recycled e The product s aluminium components are separated from the remaining par
12. ts when sorted for recycling The parts are sorted in metal plastic and mixed materials The greater part of the product is made of aluminium steel and plastic Examples of components made of mixed materials are the brake levers wheels and handlebar Ifyou are uncertain of how to handle the recyclable mate rial please contact your local authorities as different muni cipalities recycling companies follow different recycling methods Trionic Sverige AB is a member of REPA a national system for package recycling Troubleshooting Ifthe Trionic Walker does not function satisfactorily you should make a first check following the troubleshooting guide below If the guide does not help you solve the problem please contact your retailer service provider distributor or Trionic Sverige AB Problem The seat has sunk too low Possible cause The Velcro fittings under the seat need to be tightened or the Trionic Walker is not correctly unfolded Action Remove the seat and tighten the seat s Velcro bands with the Walker unfol ded Do not stretch them too much as it make sliding the seat back and forth more difficult Problem Difficult steering Possible cause The front wheel is adjusted for irregular terrain upper position Action Change the adjustment handle on the front wheel to the easy turning mode lower position as described in the Chapter Change the Front Wheel Setting Problem Poor brake function
Download Pdf Manuals
Related Search