DTT Receiver
Contents
1. Press OK to open the highlighted folder Press EXIT to return to the previous folder l Press A V to select the audio file anda mail Ceres ME ibi Press OK to start playback of the audio file Press FFW to fast forward x2 x4 x8 x20 x1 Press FRW to rewind x2 x4 x8 x20 x1 Press Play Pause to pause playback press it again to continue Press PREV to play the previous file in the list press NEXT to play the next one Press the yellow button to repeat playback of one or all of the files in the folder Press STOP to stop playback and return to the list of audio files Music 0003 New England Getit Up mp3 04 Mr Mister Bro f i i Press EXIT several times to return to the main menu 5 3 USB Photos Connect the external device to the USB port With the main menu on screen press a w to highlight the Multimedia option and then press OK The screen will change to the Multimedia menu Select the Photos option and press OK The Photos screen will appear displaving all of the folders and image files stored on the external device Main Menu Multimedia Photo TOT id 0004 Fotos Use the buttons on the remote control to carry out the following operations Press A Y to highlight the folder Press OK to open the highlighted folder Press EXIT to return to the previous folder Isdal FOTOS Press A W to select the image file photo SORES ere Press OK to view the photo Press gt to turn2. A V move up down in list or menu flip photo in multimedia playback lt gt move left right in menu choose option in circular menu rename channel in Channel Managing open Calendar in date selection see weekly programme information in the EPG guide rotate photo in multimedia playback CH CH next previous channel in channel list VOL VOL raise lower volume F1 red button mark a channel as favourite in Channel Managing go to next month in Calendar go to Today from Week in the EPG guide F2 green button remove channel in Channel Managing go to next year in Calendar go to Week from Today in the EPG guide select action when managing recorded files F3 yellow button move channel in Channel Managing go to previous month in Calendar show additional programme information in EPG guide repeat the playback of video and audio files state duration of instant recording F4 blue button lock channel in Channel Managing go to previous year in Calendar SUBT select language or deactivate subtitles if available AUDIO select audio language if available change between stereo left channel and right channel TXT open teletext if available ZOOM activate image zoom in TV viewing 4 1 Initial startup When you turn on the SMART mini receiver for the first time the TV Start installation set displavs the Start installation screen From here
3. Press OK to confirm 4 Date highlight the line using the a w buttons and then press The Calendar page appears in which you should select the schedule date in the same way as that used in the Clock option in the Configuration menu see page 15 Press OK to confirm the settings You are returned to the Schedule recording page 5 Time highlight the line with the 4 w buttons and enter the time for the schedule in the same way as that used in the Clock option Press OK to confirm the settings 6 Duration highlight the line using the A w buttons and enter the predicted duration of the programme that is being scheduled using the gt movement buttons and the number buttons Press OK to confirm the duration Press EXIT to leave the Schedule recording page and return to the main menu Do not forget to have the USB device hard disk or flash drive connected to the receiver at the scheduled time on the scheduled date 25 Games 7 GAMES 26 The SMART mini receiver includes some games for your entertainment With the main menu on screen press the A or w button on the remote control to highlight the Games option and then press OK The screen will change to the Games page which includes the folder Embedded Games Press OK again 7 1 Box Man Select BoxMan and press OK 1 On the left hand side the six available functions are shown which are selected using the A w buttons 2 To start a g
4. SMART min DIT Receiver WITH USB PORT FOR DIGITAL RECORDING TO EXTERNAL HARD DRIVE AND PLAVBACK OF MULTIMEDIA FILES Receiver SMART mini Thank you for choosing the SMART mini receiver by IKUSI which will permit you to watch Digital Terrestrial Television DTT programmes with maximum quality image and sound You will be able to receive all of the FTA channels broadcast in your region including radio programmes In addition through its USB port the device will allow you to digitally record TV programmes view videos and photos listen to audio files and have fun playing the various games that it includes Using the SMART mini receiver is very simple but reading this manual before starting is essential Keep it safe for future reference INFORMATION AND WARNING SIGNS Throughout the manual you will find these symbols Provides information of interest or advice to facilitate the use of the device i Warns of potential hazards that could damage the device Contents of the package e 1x SMARTmini receiver e 1x DC power supply e 1x Remote control e 2x 1 5 V batteries AAA LRO3 e 1x 1 2 m SCART cable For Australian market 1x 3 5 mm Jack 3x RCA cable e 1x User Manual SAFETY INSTRUCTIONS e The receiver is powered with the 12 VDC power supply provided which in turn is connected to the 230 240 V 50 Hz mains Unplug the power supply unit and disconnect the antenna during electrical storms or when the receive
5. the channels appear in ascending order of frequencv of the corresponding radio electric multiplex and in accordance with the LCN function if this was activated and works in vour countrv The Channel ordering page allows vou if you so wish to change the order of the channels There are two selection options Type of channel all only FTA or only encrypted Type of ordering in alphabetical order A Z or Z A or if applicable according to LCN or LCN Select the option using the A w buttons Press to go to the right and select the desired parameter Press OK the lower box will display the new list ordered as per your selection Press the EXIT button to return to the Channel list menu Press it again to go to the DTT menu To go to the Main Menu press EXIT again c Channel sorting Channel list This page lets you associate channels with different themes cinema sports music kids etc This makes it possible in the TV Viewing mode to list themed groups of channels thus making it easier to choose a channel Using the A w buttons select the channel you want to associate with a theme and then press the remote control number button that corresponds to that theme as indicated in the list on the right hand side The symbol of the chosen theme will then appear on the line of the selected channel Press the EXIT button to return to the Channel list menu Press it again to go to the DTT menu To go to the Main M
6. Scheduling Scheduling le N licit Schedule Class lt Channel e Channe hedule Dat hedule ime 4 Schedule Message if Message was selected in Schedule Class Highlight the line using the A w buttons and then press the gt buttons once or several times to choose between a birthday anniversary or thank you message Schedule Channel if Channel was selected in Schedule Class Highlight the line using the A w buttons and then press to move to the section on the right hand side select the channel to schedule using a Y Press OK to confirm 5 Date highlight the line using the A w buttons and then press The Calendar page appears in which you should select the schedule date in the same way as that used in the Clock option see page 15 Press OK to confirm the settings You are returned to the Scheduling page 6 Time highlight the line with the 4 w buttons and enter the time for the schedule in the same way as that used in the Clock option Press OK to confirm the settings 7 Duration only if Channel was selected in Schedule Class Highlight the line using the A w buttons and enter the desired duration of the action that is being scheduled using the gt movement buttons and the number buttons Press OK to confirm the duration Press EXIT to leave the Scheduling page and return to the Configuration menu Press EXIT to return to the DTT menu Press it again to go to the Main Menu
7. channel list Use the FRW FFW buttons to highlight a day of the week Press gt to see information about the programmes of the channel and on the selected day in their different schedules With the name of a programme highlighted press the yellow button to display extended information about it Press EXIT to return to the Week page Press the red button to return to the Today page Press the EXIT button to leave the EPG guide Press the INFO button to open a window containing information about the actions of the buttons Press EXIT to close the window 21 Receiving DTT 22 4 3 10 Teletext Some channels feature a teletext service Whilst watching a programme press the TXT button If the channel features teletext a window will appear indicating the PID number of the service Press OK A standard teletext window will open which you can use as normal 4 Teletext gt TTxPid 302 a ann 115 AAL To select a teletext page enter the three digit page number using the number buttons on the remote control e If you make a mistake finish entering any three digits and then enter the correct page number once more e f the page counter does not stop it means that the page you have requested is not available In this case enter another page number Press A Y to go to the next previous page Press to move forward 100 pages Press to return to the starting page 100 Press EXIT to leave t
8. desired position and then press OK press the blue button to mark the channel as locked parental lock You will be asked for the PIN number 0000 by default press the button to rename the channel A virtual keyboard will open on the screen Use the number and coloured buttons to enter the new channel name The 001 editing functions that the coloured buttons carry out are 00 indicated at the bottom of said keyboard ABC DEF GHI JKL MNO 4 5 6 00 04 PQRS TUV WXY mil A Z A a INS DEL Press the OK button for the marks or actions carried out to take effect Press the EXIT button to leave the Channel managing screen and return to the Channel list menu If any channel was marked as deleted a confirmation message will appear Use the buttons to select Yes or No and press OK to finish Press EXIT to return to the DTT menu To go to the Main Menu press EXIT again The abbreviations Fav Del Mov and Lock at the top of the Channel managing page are the same colours as the buttons that are used to carry out the actions represented by these abbreviations This information is also available in the window that opens when the INFO button is pressed Press EXIT to close this window 11 Receiving DTT 12 b Channel ordering Channel list LI n l Channelname Freq Bandwidth 24h 810000K 8M f In the channel list that was created when the receiver was turned on for the first time
9. ikusi com This file can then be copied to a USB storage device a flash drive for example When you update the SMARTmini software all of the personal settings that you have configured will be lost As a result you will need to search for the channels once more and configure the receiver Connect the flash drive containing the file to the USB port on the front panel of the receiver On the DTT menu screen use the A w buttons to highlight the Software update option and press OK The Software update page appears Software update Main Menu f Although the updating process is fast approx 20 secs it is important to ensure that it is not interrupted by anything whilst running An electricity cut for example could render the receiver permanently inoperable Press OK The screen will now display all of the folders and files stored on the flash drive Highlight the file using the A w buttons and press OK The update process will now begin USB Update USB Update fsda1 CAMB lt gt 0001 P7 BIN heck Check 3 Update FLASH le When the process has finished the screen will close and return to TV Viewing mode Daily use 4 3 Daily use The operation of your SMART mini receiver is very simple Only a few of the buttons on the remote control will be used regularly the number buttons to go directly to a particular channel e the CH and CH buttons to change to the next or previous channel in the c
10. 16 Settings f PIN number Using the A w buttons highlight the PIN number option and press OK The PIN number page appears gt Old PIN number New PIN numbe This page allows you to change the PIN number that is required to access certain settings channel searching lock channel delete all channels factory settings 1 Old PIN number Highlight the line using the 4 w buttons and then enter the current PIN number using the number buttons on the remote control The default PIN number is 0000 2 New PIN number Enter the new PIN number 4 numerical digits 3 Confirm New PIN number Enter the new PIN number once more If no errors were made when entering the digits an acceptance message appears and the screen returns to the Configuration menu The new PIN number is now activated Press EXIT to return to the DTT menu Press it again to go to the Main Menu If you press it once more the screen will return to TV Viewing mode Record the new PIN number in a safe place since if it is forgotten you will not be able to access the menus or options that require it If the PIN number has been forgotten use the Software update option see Ed section 4 2 6 either by loading a new software version or by reloading the current one This will allow you to use the default PIN number 0000 4 2 4 Factory settings If for whatever reason you wish to delete all of the personal settings that you have configured on your S
11. MART mini receiver this option in the DTT menu allows you to restore the configuration that the receiver had when it left the factory In the DTT menu highlight the Factory settings option and press OK You will be asked for the PIN number enter it using the number buttons on the remote control the default PIN number is 0000 In the dialogue box that appears select Yes Once the action has been carried out the television will display the Start installation screen Now follow the instructions given in section 4 1 Start installation OSD language English unti Englanc 17 Receiving DTT 18 4 2 5 Receiver version Using the A w buttons highlight the Receiver version option and press OK The Receiver version page will appear where you can view the hardware and software versions of your SMART mini along with some other related information Main Menu H W Version DVB T V1 10 S W Version Ikusi Smart Mini V1 21 F W Version 449_035_1314_1027_28 Checksum e0807c07 Build Date 2009 06 29 Build Time 15 09 28 Press EXIT to return to the DTT menu Press it again to go to the Main Menu If you press it once more the screen will return to TV Viewing 4 2 6 Software update This DTT menu option allows you to update the software of the SMART mini receiver either to add new features or improve the current ones To complete said update a bin software file is needed which can be downloaded from http www
12. MT offset This information can be used by the receiver to automatically adjust the system date and time The Clock page allows you to set the date and time of the system either automatically or manually To set them automatically do the following 1 Setup using the gt buttons select Auto The Date and Time lines are disabled 2 GMT Offset the default value Auto should normally be left unless the receiver is being installed in a time zone that is different to that of the rest of the country in the Canary Islands for example If this is the case highlight the line using the A w buttons and then press p to move to the box on the right hand side select 1 00 for summer time or 00 00 otherwise Press OK to confirm your choice 3 Summer Time this line is enabled only if Auto was not selected on the previous line Select ON if you are currently in summer time or OFF otherwise If for whatever reason you wish to manually set the date and time of the system proceed as follows 1 Setup using the gt buttons select Manual The Date and Time lines are now enabled see left hand image below 2 Date highlight the line using the A w buttons and then press The Calendar window appears see centre image below in which you should use the buttons on the remote control to select the day to see what buttons to use press INFO an information window will pop up see right hand image below press EXIT to clo
13. RT TV VCR e 1x 3 5 mm mini jack e 1x DC jack 12V input Power supply e AC in power supply unit 100 240 V 50 60 Hz e DC out power supply unit DC in receiver 12 VDC e Consumption receiver 5 5 W max Accessories e 44 button remote control e Batteries 2x 1 5 V AAA LR03 Software e Multi language OSD e List of favourite channels e Electronic Programme Guide EPG e Parental control channel and configuration lock e Functions for ordering renaming sorting and deleting channels e Subtitles and teletext if available e Last channel memorised and previous channel button e PAL NTSC support e Image zoom e Scheduling of messages and channel tuning e Quick software updating e MPEG 2 recording to external hard disk or flash drive instant scheduled e Multimedia reader MP3 JPEG MPEG 2 MPEG 4 DivX 3 11 e Games e 1 2 m SCART cable For Australian market 1x 3 5 mm Jack 3x RCA cable e DC power supply with bipolar plug e User manual General e Operating temperature 0 C to 45 C Relative humidity 25 to 75 e Dimensions width x height x depth 210 x 30 x 90 mm e Weight 270 g 10 APPENDIX Troubleshooting Problem There is no image or sound There is an image but no sound The image and the sound cut out temporarily or freeze A particular channel cannot be found The remote control does not work The receiver does not work after having updated the softwa
14. TTITI IFA FITITTTITTI II III 1 operating LED 2 infrared sensor E USB external device connection port O RF In antenna input E RF Out antenna output for TV set DVD or additional SMARTmini EG TV audio video input output for connecting to TV set VCR audio video input output for connecting to DVD O AN video and stereo audio output O 12V power input 12 VDC Preparation 2 PREPARATION 2 1 Preparing the remote control Remove the battery compartment cover and insert the two supplied batteries 1 5V AAA LR03 making sure that they are inserted the right way round Replace the cover When using the remote control point it directly at the front of the SMART mini receiver If the remote control does not work correctly it is likely that the batteries have run out and should be replaced Use only alkaline batteries If the receiver is not going to be used for a prolonged period of time remove the batteries from the remote control 2 2 Connections Disconnect from the mains supply the devices to be connected to the receiver 2 2 1 Connecting the antenna Using a coaxial cable connect the antenna to the receiver s RF In input Fig 1 If required this same antenna signal can be sent to a second SMART mini receiver being used with another TV set To do so use a second antenna cable and connect the RF Out output on the first receiver to the RF In input on the second Fig 2 NOTE This connection
15. ame select the option New Game and press OK The functions that are greyed out cannot be used 3 Press the A W DP arrow buttons to move the character Setting Totallevel 29 4 Press OK to pause the game 5 Select Exit Game to end the game and return to the Embedded Games page 7 2 Tetris Select Tetris and press OK 1 On the left hand side the five available functions are shown which are selected using the A w buttons 2 Select Settings to adjust the speed and difficulty level 3 To start a game select the option Start Game and press OK 4 Press the gt buttons to move the object left or right 5 Press the A button to rotate the object 6 Press the w button to make the object fall faster 7 Press OK to pause the game 8 Select Main Menu to end the game and return to the velina Speed 1 previous menu Here select Exit Game to leave RESTER p 1 Difficulty 1 ye CODD UE sz Main Menu 7 3 Hit Rat Select Hit Rat The gameplay screen will appear 1 On the left hand side the five available functions are shown which are selected using the 4 w buttons 2 Set the Speed using the lt buttons 3 To start a game select the option New Game and press OK 4 The number buttons 1 2 3 4 5 6 7 8 9 are used to point to top left top centre top right middle left middle centre middle right bottom left bottom centre and bottom right respectively STEG TU an 5 P
16. annel 11 Return to previous channel 20 S Safety instructions 2 Saturation of image colour 13 Scheduling A 16 channels sioni 16 MESSAGES siii 16 ESCONDINGS colti 25 turning off the receiver 16 turning on the receiver 16 Searching for channels 10 Sorting channels 12 Sound MUINO eeina aa 19 raise lower volume 19 lija l A 22 System clock ias 15 System setup 14 T Technical characteristics 28 Reel 22 Time of the system 15 Time on screen anice 14 Transparency of OSD 14 Troubleshooting scarna 29 Turning off the receiver 7 disconnecting from the mains 7 standby mode 7 Turning on the receiver 7 TV la Ta L A 13 U Updating software 18 USB UNit seinen 27 file manager 27 formatting a partition 21 V Versions of SW and HW 18 Video output signal 13 Viewing photos 24 Z Zoom changing level 20 31 IKUSI Angel Iglesias S A Paseo Miramon 170 20009 San Sebastian SPAIN AENOR E Tel 34 943 44 88 00 2 Mae a Fax 34 943 44 88 11 EX E Net www ikusi com A v 120104A
17. ation about all of the channels that it receives through the antenna and has created the Channel List You can already view any of the channels in this list take a look at section 4 3 4 on page 19 but please carry on reading this manual in order to first discover all of the features of the receiver and to familiarise yourself with its use On the screen you are seeing images from the first channel in Main Menu the list Press the MENU button on the remote control The Main Menu page appears with these options 1 DTT to watch the television or listen to the radio 2 Multimedia to play back video or audio files or to view photos 3 Schedule recording to external hard disk 4 Games just for fun 5 USB unit for managing the external USB device The DTT option is the main function of the SMART mini receiver and is the subject of this chapter 4 When the receiver is turned on during its daily use the screen displays the channel that was tuned in the last time the device was turned off D If you are watching the television TV viewing and you wish to access the Main Menu press the MENU button on the remote control If you are on the menu screen and wish to return to the TV viewing press the EXIT button several times Receiving DTT 10 4 2 Receiver settings lrr m m VI iljjoei iizpip fg o z ZSsd i o _ b x x 5 q 3 NMR RRZ _ _ _ SNNhvwv_ With t
18. can only be made if the RF Out output is not going to be used to connect the antenna signal to the TV set itself see Fig 5 on next page Fig 1 ttittttttt ttittiittt ttitttittt ttittiittt o tittttttttt tititttitt o O 3 tittttttttt tittiititt gle RF In RF Out TV VCR AV 1N RF In RF Out TV VCR AV 12v SMARTmini 1 SMARTmini 2 Fig 2 SMART mini Receiver 2 2 2 Connecting the TV set Using the supplied SCART cable connect the SCART socket marked TV on the receiver to an available SCART socket on the TV set Fig 3 The format of the video signal provided by the receiver can be either RGB or CVBS PAL NTSC composite video The TV set must therefore be compatible with one of these two video formats typically a DVD player and connect this device to the SCART socket marked VCR on the SMARTmini receiver Fig 4 When the device is turned on the signal will automatically be diverted to the TV set If you install your SMARTmini receiver before the analogue switchover comes into effect in your region you should connect the antenna to the TV set and to your video or DVD in order to continue receiving the analogue channels To do so use a second antenna cable and connect the RF Out output on the SMART mini receiver to the antenna input on the TV set Fig 5 If your TV set does not have a free SCART socket disconnect one of the other devices from the TV set titittititi tttttttt
19. cy of the OSD messages It can be set to between 0 and 60 Make the selection by repeatedly pressing the buttons 5 OSD Language the language in which the on screen text is displayed Highlight the line using the A w buttons next press the button to move to the section on the right hand side select the language you prefer using the gt buttons Press OK to confirm your choice 6 1 audio language choose the language that you want to appear first in the list of available languages on the TV channels AUDIO button Press OK to confirm 7 2nd audio language choose the language which will appear in second place 8 MP4 subtitle language this is the language of the subtitles when playing DivX files Highlight the line using the A w buttons next press the button to move to the section on the right hand side select the language you prefer using the gt buttons Press OK to confirm your choice Lastly press OK to confirm all of the OSD settings The screen returns to the Configuration menu Press EXIT to return to the DTT menu Press it again to go to the Main Menu c System Setup Highlight the System Setup option and press OK The System Setup page appears Svstem Setup Sound Class 4 Standard Here you can set different parameters regarding the general system of your SMART mini receiver 1 Sound Class this setting allows you to choose a particular type of sound Highlight the line using
20. e connect the USB connector of the external device to the USB port on the front panel of the receiver Fig 7 The SMART mini is mainly designed to work with external hard disks that have their own power suppy i e which are powered from the mains supply However although we cannot guarantee that they will work with Ed the receiver the use of self powered disks may also be possible In any event the disk must be formatted using the FAT32 file system IKUSI takes no responsibility for the loss of any data from the external device caused by the incorrect use of the SMART mini receiver We recommend that a backup copy of all data is made prior to use 2 2 6 Connecting the power supply Insert the jack connector of the power supply into the 12V input on the SMART mini receiver and then plug the power supply unit into the mains socket 2 3 Turning the receiver ON and OFF 2 3 1 Turning ON the receiver When the power supply is plugged into the mains socket the light on the front panel will light green receiver in on mode When in daily use the light is red or out receiver in standby mode press the d button on the remote contro the light will turn green receiver in on mode 2 3 2 Turning OFF the receiver With the receiver in on mode the light on the front panel is green press the d button to turn it off receiver in standby mode The SMARTmini receiver does not feature a switch for completely disconnecting th
21. e power supply When you wish to completely disconnect it from the mains unplug the power supply from the mains socket The light on the front panel will go out Unplug the power supply if you are not going to use the receiver for a prolonged period of time e g whilst on holiday SMART mini Receiver Settings 3 REMOTE CONTROL BUTTONS 4 RECEIVING DTT Digital Terrestrial Television SUBT AUDIO TXT ZOOM PLAY PAUSE STOP SLOW E IP FFW PREVIOUS NEXT Pl PLAY PAUSE pause continue multimedia playback STOP stop multimedia playback stop instant recording SLOW change video playback to slow motion REC start instant recording schedule recording from EPG guide FRW amp FFW change day of week in EPG guide fast forward amp rewind video or audio playback PREV amp NEXT play previous amp next multimedia file d on standby TV RADIO change between TV channels and Radio channels ox mute sound NUMBER BUTTONS 0 9 select channels enter numeric values EPG open electronic programme guide RECALL return to the last viewed channel MENU exit TV viewing and enter main menu FAV open favourite channels list INFO display channel information in TV Viewing mode display buttons operation in Menu mode EXIT close OSD window return to previous menu exit main menu and enter TV viewing OK open channel list confirm selection in list or menu
22. eletext 4 3 11 Subtitles Press the SUBT button whilst watching a channel The Subtitles window will appear indicating the subtitle languages that that channel offers and their PID number The top part of the window features a selection box use the gt buttons to choose between Subtitles TTX Subtitles and OFF If you select Subtitles the box below will show the available languages select the one you want to use using the A w buttons and press OK If you select TTX Subtitles the box will indicate the number of the teletext page that transmits them Select OFF if you do not wish subtitles to appear for the programmes on that channel Press EXIT to close the window Multimedia 5 MULTIMEDIA Multimedia playback The SMART mini receiver features a USB port on its front panel for the connection of external devices such as flash drives MP3 players hard disks and digital cameras The receiver can reproduce MP3 audio files MPEG 2 4 and DivX video files and JPEG images amongst other file types Press the MENU button on the remote control to bring up the Main Menu 5 1 USB Cinema Connect the external device to the USB port With the main menu on screen press a w to highlight the Multimedia option and then press OK The screen will change to the Multimedia menu Select the Cinema option and press OK The Cinema screen will appear displaving all of the folders and video files stored on the external de
23. enu press EXIT again d Delete all Channel list When you highlight the Delete all option and press OK you will be asked for the PIN number 0000 by default The Delete all menu will appear How to delete channels from the list one by one using the Channel managing option has already been explained This page Delete all allows you to remove in one go either all of the TV channels or all of the Radio channels Select the correct option using the A w buttons and press OK A dialogue box will appear use the gt buttons to select Yes and then press OK Once the action has been completed the screen will display the message DATABASE EMPTY if all of the TV and Radio channels have been deleted Press the EXIT button to return to the Channel list menu Press it again to go to the DTT menu To go to the Main Menu press EXIT again Settings 4 2 3 Configuration In the DTT menu highlight the Configuration option and press OK The Configuration menu appears with 6 options a TV Image b OSD c Svstem Setup d Clock e Scheduling f PIN number As you will see the options a b c and d have numerous selection and adjustment parameters However most default values of these parameters may be perfectly suitable for your purposes and so you will probably need to change not many of them a TV Image Using the a w buttons highlight the TV Image option and press OK The TV Image page ap
24. et the brightness The default value is 80 6 Hue this should only be adjusted if the NTSC colour system has been selected The default value is 0 7 Saturation this is the level of colour saturation Follow the same selection process as before The available levels range from 0 to 12 with 0 being the default value 16 9 Press OK to confirm the completed adjustments The screen returns to the Configuration menu Press EXIT to return to the DTT menu Press it again to go to the Main Menu 13 Receiving DTT b OSD Using the A w buttons highlight the OSD option and press OK The OSD On Screen Display page appears This page allows you to configure 8 parameters of the OSD On Screen Display functions 1 OSD here you can select the colour scheme of the OSD Highlight the line using the A w buttons and then press the 4 b buttons to choose the colour you prefer 2 Time on screen use this option to select whether or not the time is displayed over the TV image Highlight the line using the A w buttons and then press gt to select either On or Off 3 Automatic OSD duration this is the amount of time that the OSD message will automatically appear for after certain actions are carried out in the menus or when watching the TV Make the selection by repeatedly pressing the gt buttons Values range from 1 to 6 seconds 3 secs by default 4 OSD transparency this is the degree of transparen
25. exceeds this limit a second file will be created 6 1 Instant recording Connect the external device to the USB port To start recording the programme that you are currently watching just press the REC button REC is displayed over the image Press STOP to stop recording STATE DURATION Once the recording is started you can state its duration between 15 and 120 min in 15 min steps Press the yellow button and select the duration with the lt gt buttons Then press OK 6 2 Scheduled recording With the main menu on screen press A Y to highlight the Schedule recording option and then press OK The screen will change to the Schedule recording page Schedule recording Main Menu Schedule No 1 Per Telli I ICIL ONCE hannel CNN Dat 01 Time lt 09 30 Duration 01 1 Schedule Number highlight the line using the A w buttons and press the button to go to the section on the right hand side using the A w buttons select the number you wish to assign to the schedule and press OK Up to 8 schedules are possible 2 Periodicity highlight the line using the 4 w buttons and then press the gt buttons once or several times to choose between Off Once Daily and Weekly The Off option is used to deactivate or change a schedule 3 Channel highlight the line using the A w buttons and then press gt to move to the section on the right hand side select the channel to schedule using A w
26. hannel list ethe DICK button to mute the sound e the EPG button to go to the programme guide You will also use other buttons but only occasionally The most common tasks that you will carry out are described in the following sections 4 3 1 Turning on and turning off the receiver To turn on or turn off standby mode the receiver press the d button When it is turned on the channel that was tuned in when the receiver was last turned off will appear on the screen 4 3 2 Adjusting the volume Press the VOL or the VOL button to change the volume The screen will display adjustment bars Press the IK button to completely mute all sound Press it again to return the sound to its previous volume 4 3 3 Changing between television channels and radio channels Press the TV RADIO button to change between television channels and radio channels 4 3 4 Changing channel This can be done in any of 3 ways a Using the number buttons enter the number of the channel assigned to it in the channel list If the number has two digits the second one must be entered in less than 2 seconds after the first The list is opened by pressing OK and closed by pressing EXIT b Press CH to go to the next channel in the list or CH to go to the previous one c Press OK to open the channel list see left hand image below Press A w to select the channel Press OK to confirm your choice Next press EXIT to close the list If there are chan
27. he Main Menu on the screen use the a w buttons to highlight the DTT option Press OK The DTT menu will appear Main Menu Channel searching Channel list Configuration Factory settings Receiver version Software update 4 2 1 Channel searching This option can be used when for whatever reason all of the channels have been deleted from the channel list or when you wish to add an additional channel to the current list In the DTT menu highlight Channel searching and press OK You will be asked to enter the PIN number enter it using the number buttons on the remote control by default the PIN number is 0000 and you can change it via the PIN number option in the Configuration menu see page 17 The Channel searching menu appears which will help you to create the list of channels There are 3 ways to proceed 1 Automatic search 2 Manual search I Channel searching 3 Manual search Il Enter PIN Automatic search The SMARTmini receiver makes an intelligent search for all the DTT channels broadcasted over the countrv where vou are installing it the country you selected in the Start installation screen Use the A V buttons to highlight the Automatic search option and press OK The Channel searching page will appear and at once the search starts if Channel searching you want to stop it at any moment press EXIT The receiver will detect all the multiplex digital channels received via the an
28. he channels and configure the receiver again using the default PIN number 0000 If you experience any doubts or difficulties using your SMART mini receiver contact the establishment where you purchased the device Do not forget to present the sales receipt 28 29 30 CE Marking SMART mini receiver and the supplied power supply with all corresponding In reproducing the CE marking IKUSI guarantees compliance of both the C regulations in accordance with directives EMC 2004 108 EC and LVD 2006 95 EC Guarantee Notwithstanding anv claims presented to the direct reseller of the product IKUSI offers the user of the SMART mini receiver a guarantee of two years starting on the date of the sales invoice validated through the presentation of the sales document During the period of the guarantee IKUSI will take care of anv faults caused bv defects of materials or manufacture repairing the receiver or replacing it for another which corresponds to the current equivalent technology The guarantee does not cover breakdowns or defects caused by the incorrect use of the device or the failure to follow the instructions detailed in this user manual The guarantee does not cover anv claims other than the aforementioned in particular the guarantee does not cover the services provided by the authorised reseller e g installation configuration software updates nor repairs for anv damage or anv harm that the client or anv third pa
29. n to enter the EPG page the electronic programme guide The guide provides information about today s and this week s programmes for all of the channels as long as this information is transmitted by the channels By default the Today page appears showing the receiver s channel list Highlighted in the list is the channel which is currently tuned in The box to the right shows the programme grid for that channel for today 16 55 17 20 Los Sustitutos 0 1 Py Tian n Dragon Jal 0014 Disney C Daily use Use the A w buttons to highlight a different channel in the list At the same time the corresponding programme grid will be displayed on the right hand side Press gt to move between the channel list and the programme grid To move through the grid press A Y With the name of a programme highlighted press the yellow button to display extended information about it Press EXIT to return to the Today page With the name of a programme highlighted press the REC button to schedule it for recording using the PVR function of the receiver see section 6 2 on page 25 Press the EXIT button to leave the EPG guide Whilst on the Today page press the green button to enter the Week page where you will be shown the programmes for today and for the six following days Week 0002 40 LATIN 40 LATINO EN OOD NTEN l l ral Use the A Y buttons to highlight a channel in the
30. nels which have been sorted by theme in the option Channel sorting page 12 open the channel list and using the 4 gt buttons select the desired theme Sports for example see centre image below The list will now show only those channels that you have associated with this theme Press A Y to select the channel Press OK to confirm your choice Next press EXIT to close the list If there are channels which have been set as favourites and the one you wish to view is one of them you can select it quicker by pressing the FAV button The list of favourite channels appears see right hand image below Press A w to select the channel Press OK to confirm your choice Next press EXIT to close the list Channel LIST Channel LIST Favourite LIST 4 None gt 4 Sports gt No Channel Name No Channel Name 0001 24h 0070 ETBI NT 100 I No Channel Name 0001 24h ledeport Favourite channel list 19 General channel list Themed channel list Receiving DTT 20 4 3 5 View channel information Press the INFO button to open up a window containing the name of the channel and the names and times of the programme that is currently being broadcast and the one that is to be shown next If you press the button again the window will also display certain technical parameters frequency and number of the multiplex and the service video audio and PCR PIDs as well as some information about the reception level and the quali
31. pears TV Image Colour System Aspect Ratio gt Video Output Brightness Contrast Hue Saturatio This page lets you adjust various parameters regarding the TV image provided by the SMART mini allowing you to fine tune it to your particular television set 1 Colour System here you can choose the colour system of the CVBS composite video signal that the receiver provides through the TV SCART and A V mini jack connectors Highlight the correct line using the A w buttons and then press to select that system There are 3 options PAL NTSC and Auto The default option is Auto 2 Aspect Ratio this selection is made in the same way If your television screen is 4 3 that is to say not panoramic you can 3 choose between 4 3 PS and 4 3 LB If it is panoramic you ei oN should select 16 9 PS The default option is 4 3 PS 3 Video Output this is the type of video signal provided by the receiver The options are RGB and CVBS composite video The lt 2 l 4 3 PS 4 3 LB 16 9 PS default option is RGB 4 Brightness this is the brightness of the image Highlight the line using the A w buttons Next press to go to the list on the right hand side and select there once again using the A w buttons the percentage brightness that you prefer The default value is 80 Press OK to confirm 5 Contrast this is the contrast of the image Follow the same selection process as used to s
32. r is not in use for a prolonged period of time The receiver the power supply and the remote control can only be repaired by authorised service personnel Never open them Do not obstruct the air vents of the receiver or the power supply or place other devices on top of them Leave enough space around them to allow the heat they produce to dissipate Place the receiver and the power supply away from heat sources and direct sunlight Do not use them in areas with high humidity swimming pools etc and avoid contact with insecticides or solvents Do not dispose of the receiver or the power supply by throwing them out with normal household waste Take them to the special collection points made available by your local authorities The packaging is recyclable deposit it in the paper and cardboard recycling bin To clean the receiver the power supply and the remote control use a dry or slightly damp soft cloth CONTENTS 1 PANEL DESCRIPTION 4 2 PREPARATION 2 1 Preparing the remote Control c c 5 2 2 GONMECUO Ti i ao 5 2 2 1 Connectingthe antenna lia 5 2 2 2 Connecting to the TV set leali 6 2 2 3 Connecting to a Hi Fi system allea 6 2 2 4 Connecting to a video projector sissa tiri e ten unacisetuliduaadewractentantaels 6 2 2 5 Connecting an external USB device ti ssir 7 2 2 6 Connecting the power Supply scs 7 2 3 Turning the receiver ON and OFF sssssasssssunnunnunnnnnnunnunnnnnnunnnnnnunnnnnnnnnnnnnnnnnnnnnnnn nnne 7 2 3 1 Turning ON
33. re The PIN number used to lock channels has been lost Possible cause The TV set is not receiving a signal from the SMART mini receiver or is not set up correctly Mute is activated on the receiver or the TV set The signal received through the antenna is weak The corresponding signal through the antenna is very weak The batteries have run out The remote control does not point correctly There is an obstacle between the receiver and the remote control The receiver has locked up This is normal The update process deletes all of the channels and any personal settings Technical Assistance What to do Check that all of the devices are turned on and connected correctly Check that the television set is using the appropriate A V input Check the volume setting on the receiver and on the TV set Check the signal level indicated on the information screen for that channel INFO button pressed twice Consult an antenna technician to ensure that the antenna orientation is correct Consult an antenna technician to ensure that the antenna is correctly installed Change the batteries Point the remote control at the front panel of the receiver Remove any obstacles preventing direct visual contact Wait a few minutes If the receiver does not recover unplug and plug the power supply Search for the channels and configure the receiver again Use the Software update option You will have to search for t
34. ress OK to pause the game 6 Select Main Menu to end the game and return to the previous menu Here select Exit Game to leave Setting 1 USB unit 8 USB UNIT This main menu option is dedicated to managing the USB device hard disk or flash drive used for the PVR feature described on page 25 Connect the device to the USB port With the main menu on screen press the a or W button on the remote control to highlight the USB unitoption and then press OK The screen will change to the USB unit menu Main Menu USB unit The menu presents two options File manager and Format partition a File manager Using the a w buttons highlight the File manager option and press OK The File manager page will appear showing all of the mpg files in the PVR folder on the device along with their duration and size From here vou can plav or delete anv of the files First vou must select in the top part of the screen which of these actions to carrv out To do so press the green button on the remote control once or more Select the Play action if you wish to monitor a file Highlight the file using the 4 w buttons and press OK The file will play on the right hand side of the window Press OK again to restart the playback or press STOP to stop it Select the Delete all action if you wish to delete all of the files in the list Press OK A message will appear asking you to wait followed by another asking
35. rtv mav suffer as a result of the installation or operation of the receiver lightning strikes or other natural pnenomena Alphabetical index A Active antenna 15 Aspect ratio is 13 B Brightness of image 13 C Changing channel 19 Channel information 20 COIOUFSYSICHI sian 13 CONNGUIAlO Nicotra 13 Connections scr 5 A 5 multimedia USB devices 7 MUSIC centre encinar 6 power supply coria ea 7 television Set 6 video projector 6 Contrast of image 13 D Deleting a channel 11 Deleting all chanels 12 E EPG programme guide 20 F Factory setings sica 17 Favourite channel create 11 G Games SER E AO 26 L Language Udo 20 OSD AA e tu TERE NI 14 subtitles ria 22 List of channels ucraina 19 List of favourite channels 19 M Moving a channel in the list 11 O Ordering the channels 12 l 14 P Panel description 4 Parental lock caviseicioic itan s 11 Photo EMO Cho siii 15 PIN number ise esebit 17 Playing audio ad 23 Playing video isir ori 23 R Radio listening 19 Recording programmes 25 Remote control function of the buttons 8 preparing sitiar dica 5 Renaming a ch
36. se this window Press OK to confirm the date setting You are returned to the Clock page 3 Time highlight the line using the A w buttons and enter the time using the lt gt movement buttons and the number buttons Press OK to confirm the settings automatic or manual The screen returns to the Configuration menu Press EXIT to return to the DTT menu Press it again to go to the Main Menu Clock Manual Receiving DTT e Scheduling Using the A w buttons highlight the Scheduling option and press OK The Scheduling page appears Scheduling Schedule No Periodicit This page allows vou to schedule the turning on and off of the receiver channel tuning and the appearance of OSD messages Up to 8 schedules are possible 1 Schedule Number highlight the line using the A W buttons and press the button to go to the section on the right hand side using the A w buttons select the number you wish to assign to the schedule and press OK 2 Periodicity highlight the line using the A w buttons and then press the gt buttons once or several times to choose between Off Once Weekly and Yearly The Off option is used to deactivate or change a schedule 3 Schedule Class this option works in the same way The available options are Off Message Channel and On The Off and On options refer to the scheduled turning on or off of the receiver on the date and time set below
37. t4 VOR La Fig 3 TV TV gt ttititititit AAA tittititti tttttttttt O Out Tv VOR AN 12 AAA tititititt u Fig 4 DVD Connecting the TV set in AUSTRALIA Using the supplied Jack 3x RCA cable connect the mini jack of the cable to the A V output on the SMARTmini and then make the Fig 5 video and audio connections to the TV set 2 2 3 Connecting to a Hi Fi system The SMART mini receiver can also deliver the analogue audio signal to your Hi Fi system allowing you to enjoy a far better sound quality than that provided by a normal TV set For this you will need a Jack 3x RCA cable not supplied Connect the cable to the A V output of the SMART mini and then make the audio connections indicated in figure 6 2 2 4 Connecting to a video projector You will need the previously mentioned Jack 3x RCA cable Connect the mini jack of the cable to the A V output on the SMARTmini and the video connector to the input on the projector Projector Hi Fi System Preparation 2 2 5 Connecting an external USB device You can use your SMART mini to play video music and photo digital files stored on external USB devices flash drives hard disks as well as record onto these devices the video and audio from the DTT channel which is currently tuned in Using a USB cabl
38. tenna and will automatically create the channel list When the search ends the screen returns to the Channel searching menu Press EXIT to return to the DTT menu To go to the Main Menu press EXIT again No TV Channel No Radio Ni NI NI NI Fl Hi PA Manual search l This option as well the next one Manual search II are intended for Manual search l expert users of DTT Use the A w buttons to highlight the Manual SAFRI AMAT search I option and press OK The Manual search I page will End Freq kHz 58C appear it allows to search the channels by frequency bands Most SANGWAN M countries broadcast DTT only in UHF band Before starting the search you should enter if they have not already been entered the following values Start Frequency 474000 End Frequency 858000 Bandwidth 8M Press OK to start the search The receiver will detect all the multiplex digital channels existing in the selected band and will automatically create the channel list When the search ends the screen returns to the Channel searching menu If another band must be scanned carry out a new ONLY FOR AUSTRALIA search by entering the corresponding frequency Start Frequency 177500 Start Frequency 529500 values Then press EXIT to return to the DTT menu End Frequency 226500 End Frequency 816500 To go to the Main Menu press EXIT again Soe E ii Settings Manual search Il This tvpe of search is indicated to add a new mul
39. the A w buttons and then repeatedly press the 4 gt buttons to choose between Standard Classical Rock Jazz and Pop The selection by default is Standard Press OK to confirm 2 Sound Effect select a stage effect This can only be changed if the sound class was set to Standard Highlight the line using the 4 w buttons and then repeatedly press the lt gt buttons to choose between Off Concert Church Passive or Live 3 Active Antenna the possible options are ON and OFF If you select ON the receiver sends a voltage of 5 V through the antenna connector If there is no active antenna connected you should select OFF If you select ON and there is no active antenna connected indoor antenna equipped with preamplifier AN the receiver may become damaged and cease to work 14 Settings 4 LCN this refers to the automatic classification of channels in the channel list 5 Country select your country 6 Photo Effect select ON if you want the receiver s multimedia playback feature to include artistic transition effects when displaying photo slide shows Press OK to confirm the completed adjustments The screen returns to the Configuration menu Press EXIT to return to the DTT menu Press it again to go to the Main Menu d Clock Using the A w buttons highlight the Clock option and press OK The Clock page appears Configuration Clock Ed The DTT channels transmit the date and the time and G
40. the photo 90 to the left right Press A to flip the photo horizontally A 0007 166 7705 1G Press W to flip it vertically Press PREV to view the previous photo in the list press NEXT to view the next one press OK to start an automatic slide show of the photos Press STOP to return to the list of photos Press EXIT several times to return to the main menu If the Photo Effect option on the System Settings page of the Configuration menu see page 15 is set to ON the slide show will include artistic transition effects PVR 6 PVR Personal Video Recorder Recording programmes The PVR feature of the SMART mini function allows you to record programmes in digital format to an external hard disk or flash drive The disk should have its own power supply and this device as well the flash drive should be formatted using the FAT32 file system The recording is MPEG 2 compatible and only includes the video and the main audio from the channel Subtitles teletext and multiple audio streams are not recorded Check that the hard disk has enough free space 1 5 GB should be available for each hour of recording When the disk is full recording stops The recording is saved in the mpg format in a folder called PVR which is created automatically Recorded files can be played using the Cinema option in the Multimedia menu page 23 The maximum file size for recordings is 3 8 GB If a recording
41. the receiver raevan 7 2 3 2 Turning OFF the receiver iaia 7 3 REMOTE CONTROL BUTTONS onnnmccccoccococncocincocannocacanonancorannnrannrrranrrnnnrraannnnas 8 4 RECEIVING DTT EL IntalstiariuPp a ie 9 O CA o 10 4 2 1 Channel searching sosa 10 en o 11 42 3 MU 13 424 in dad 17 425 AS lla 18 42 6 SISI 18 45 DAI US a 19 4 3 1 Turing ON and turning OFF the receiver s ss sennnnenzenzznnznnnnnnnenznnzenznnnmn ntenni nn az 19 4052 AULE al a 19 4 3 3 Changing between TV channels and Radio channels sse nnnnn 19 4 3 4 Changing channel solo i tienen qiacdstiaeusabereseenutiles 19 4 3 5 Viewing channel NOTARI 20 4 3 6 Retumingiothelastviewedchannel cuini iaia 20 4 3 7 Selecting the audio NdUage rca 20 omo 20 4 3 9 EPG Electronic Programme Guide ini 20 ae O E toi 22 lle 22 5 MULTIMEDIA Bol Multimedia plavbatk si iii i EAEEREN 23 511 USB l so cascecrtet asec evsemastud yaad aniaaicnastipaceaamser anata teeta 23 512 USB IMUSIC just iii e e iii aci aa 23 543 MOB o O ere ae oe E eee 24 6 PVR Personal Video Recorder 6 1 Instant AA 25 6 2 Scheduled recording Lucini 25 GAMES ca 26 USB UNI conan 27 TECHNICAL CHARACTERISTICS ennnnnnzennnznnanannnnnnnnznnnanmnnnnnmnnnnmananmnnaz 28 10 APPENDIX MUONS SVG tc E e O o eee 29 ENEL ERROR ene Re eT REE er O O eee tes mer O TE 30 Alp abeticalindeX asador 31 SMART mini Receiver 1 PANEL DESCRIPTION FRONT PANEL REAR PANEL TITITI
42. tiplex to the current Manual search ll channel list Open the Manual search II page as explained for the Manual search 1 Here you must enter the frequency and the bandwidth of the multiplex you wish to search for and then press the OK button Afterwards the screen returns to the Channel searching menu each time ready to search for another multiplex Freq KHz 4 474000 B ndwidth M 4 2 2 Channel list In the DTT menu highlight the Channel listoption and press the OK button The screen will change to the Channel list menu This menu allows you to a manage b order c sort and d delete the channels found in the search You can change from television channels to radio channels by pressing the TV Radio button on the remote control a Channel managing Using the a w buttons highlight the Channel managing option and press OK The Channel managing screen will appear showing the list of channels found in the search Channel list The page offers five options Favourite channel Fav Delete channel Del Move channel Mov Lock channel Lock and Rename channel Using the a w buttons select the channel in question and then press the corresponding remote control button press the red button to mark the channel as a favourite press the green button to mark the channel as deleted press the yellow button to move the channel to another position on the list Use the A w buttons to Move it to the
43. ty of the signal Press EXIT to close the window 0014 Disney Chann 850000 KHz 68 UHF 4 3 6 Returning to the last viewed channel Press the RECALL button to return to the channel that you were watching before the current one By using this button you can easily alternate between two different programmes 4 3 7 Select the audio language Press the AUDIO button A window appears showing all of the available audio languages and their PID numbers Using the A W buttons select the desired language En kr ngus lt If the sound is stereo you can use the gt buttons to choose between listening in stereo i e both audio channels listening to just the left hand channel or listening to just the right hand channel according to what is indicated in the above selection box Press OK to confirm the settings or EXIT to leave without making any changes 4 3 8 Image zoom Press the ZOOM button to activate the image zoom mode The image is enlarged x2 By pressing this button repeatedly the zoom can be changed to x3 x4 x1 2 x1 3 x1 4 and off When the zoom is set to x2 X3 or x4 the image frame can be moved using the gt and A w buttons Information about the zoom level remains on display on the screen To return to the normal image set the zoom to off the information will then disappear once the time set for automatic OSD messages has elapsed 4 3 9 EPG Electronic Programme Guide Press the EPG butto
44. vice Cinema 001 002 0003 Video lkusi Use the buttons on the remote control to carry out the following operations Press A w to highlight the folder Press OK to open the highlighted folder Press EXIT to return to the previous folder ISdat PVR Press A Y to select the video file G3 OONAN ORAMA Press OK to start playback of the video EB 0003 CNN_ Press FFW to fast forward x2 x4 x8 x20 x1 bi dio Press FRW to rewind x2 x4 x8 x20 x1 Press SLOW for slow motion playback 1 2 1 4 1 Press Play Pause to pause playback press it again to continue Press PREV to play the previous video in the list press NEXT to play the next one Press the yellow button to repeat playback of one or all of the files in the folder Press STOP to stop playback and return to the list of videos Cinema Press EXIT several times to return to the main menu 5 2 USB Music Connect the external device to the USB port With the main menu on screen press a w to highlight the Multimedia option and then press OK The screen will change to the Multimedia menu Select the Music option and press OK The Music screen will appear displaying all of the folders and audio files stored on the external device Multimedia Music Main Menu 004 Fot 0005 MP3 006 CI Multimedia 24 Use the buttons on the remote control to carry out the following operations Press A w to highlight the folder
45. vou can automaticallv install all of the digital channels received via the antenna But first vou must make the correct choices regarding the following parameters 1 OSD language this is the language used for the menus and the messages that the receiver displavs on screen Bv default this is set to English To change this option press the button on the remote control to open the list of languages on the right hand EEA side now use the A w buttons to highlight the desired language and press OK From this moment onwards all of the No TV Channel Jo Radio Channel text displayed on the screen will be in that language 2 Country this is where the receiver is installed By default this is set to England If you are in another country change this option in the same way as indicated above 3 LCN Logical Channel Numbering this refers to the automatic classification of the channels Select ON or OFF in the same way as indicated above OSD language LCN Press the OK button A confirmation message appears Press 4 to select Yes and then press OK again The channel search begins The receiver will detect all the channels received via the RF In input and will automatically create a list of channels Once the process has finished the television screen will begin to display images from the first channel on the list You are now watching DTT on your TV Accessing the menus Your SMART mini receiver has stored inform
46. you to confirm Select the Delete one action if you wish to delete a single file from the list Highlight the file to delete using the A w buttons and press OK A message will appear asking you to wait followed by another asking you to confirm Press EXIT several times to return to the main menu b Format partition This option can be used to format the USB device used for the PVR feature with the FAT32 file system if it has not already been done Connect the device to the USB port Using the A w buttons highlight the Format partition option and press OK A dialogue box will open asking you to confirm that you wish to format the device Format partition Upon formatting the USB device all of the data stored on it will be permanentiv deleted 27 9 TECHNICAL CHARACTERISTICS RF input e DVB T FTA MPEG 2 COFDM e Frequency band 170 858 MHz e Signal level 29 99 dBuV e COFDM modes 2K and 8K e Channel bandwidth 6 7 8 MHz e Loop through bandwidth 47 862 MHz e Indoor antenna remote powering 5 VDC MPEG 2 decoding e Standard MPEG 2 MP HL AN inputs outputs e TV SCART RGB out PAL NTSC out stereo audio out e VCR SCART PAL NTSC in out stereo audio in out e A V jack PAL NTSC out stereo audio out Front panel e Type A female USB2 port Red green LED indicator e Infrared sensor Rear panel e 1x female IEC 169 2 RF input e 1x male IEC 169 2 RF loop through output e 2x SCA
Download Pdf Manuals
Related Search