DVC-240 User Manual web
Contents
1. 10 Wkey Change the exposure mode in range of 2 0 to 2 0 11 MENU Menu key Press to enter system setup pages Use A V key to switch the submenus and press Ok to enter a submenu Press Menu key to exit the current setting page 12 Mode key Switch operating mode from video recording to photo shooting to audio recording and to playback mode circuarly 13 SD Card Slot Install SD memory card sold separately 14 Flashlight Work in photo shooting mode only 15 Fixing screw hole Connect to a standing tripod 16 USB interface Connect to computer with an USB cable 17 AV interface Use 3 5mm AV cable to send video or image to external display device such as a TV 5 Specifications 1 Photo resolution 1 4000 3000 interpolation 2 2592 1944 3 2048 1536 4 1024 768 5 640 480 2 Video resolution 1 1280 720 HD 2 720 480 3 640 480 4 320 240 3 Shooting photo mode single shoot 3 burst self shoot in 2 or 10 seconds 4 Mode video recording photo shooting audio recording and playback 5 External storage max 8G SD SDHC or MMC cards 6 Lens 5M optic lens with near and far focus 7 Focus 0 5 m to infinitum from camera 8 Viewfinder 2 4 TFT LCD Display 9 White balance auto daylight cloudy fluorescent tungsten 10 File format JPEG AVI 11 Computer interface USB 2 0 12 Power AAA battery 3 13 Flash mode auto flash compulsory flash no flash 14 Power control2. If NAND FLASH SD or MMC cards are used to store the photos the photos will not be lost if batteries are replaced when the unit is in normal power off condition 4 Never touch the lens to avoid blur pictures or obstacles of the camera 5 Never modify this camera in any way otherwise fire electric shock serious bodily injury or damage to the camera may occur 6 When using this unit Keep away from gas subject to burning or explosion to avoid possible explosion 7 In case that liquid or foreign matter of any form comes into the camera do not use the unit At this time please turn the off the unit first then disconnect the power 8 When using the flashlight please keep away from person or animal otherwise the same may damage the eyesight 9 Never place the camera in places subject to high temperature such as closed vehicles or place exposed to direct sunshine or significant temperature difference High or low temperature is harmful to the internal components of the unit and may lead to fire 10 When using the unit in low temperature the following situations may occur which are not the obstacles of the unit and the performance may resume to normal usually under normal temperature lt takes long to turn on the LCD and the color may be different from the object to be shot Photogene may appear on LCD if the object to be shot is changed 3 Packing Contents Please make sure the following items are inclu
3. We stwell Australia Pty Ltd All rights reserved All promotion ials offered for reference only Actual may v
4. manual switch off auto switch off 1 3 5 minutes and None Digital zooming 4 x digital Zooming TV output system PAL and NTSC EV 2 0 EV PC CAM MSDC Removable disk 6 Basic functions 1 Video recording Upon installing the batteries and open the LCD display the power indicating light will be on and the turning on image appears on LCD the system enters video recording mode as shown in the following sketch Press key to take video and the shooting time is displayed on the upper right corner of LCD During the process press K key to stop shooting video Press lt key to preview the recording Press A key to select preferred movie size such as HD 20 640 and 320 Press W to change the exposure mode in range of 2 0 to 2 0 12 2 Photo shooting mode Under video shooting mode press MODE key the unit will enter the photo shooting mode as shown in the following sketch a A FT FL FA i l z THEI a The total number of photos may be taken and stored in the external SD memory card is shown on the up right corner of the LCD display Pressing key and a click sound from the camera will be given a photo is taken and the number on the up right corner will be reduced by one Press lt key to preview the photos Press A key to switch among self shooting in 2 10 seconds and 3 burst Press V key to change the exposure mode in range of 2 0 to 2 0 13 3 Audio rec
5. three AAA batteries and close the cover firmly STEP 3 Open the SD memory card protection cover and insert the SD memory card properly And then close the memory card slot cover STEP 4 Hold the camcorder with the right hand and lift up and rotate the LCD display with the other hand The unit will boot up to the video recording mode automatically STEP 5 Press the Menu button to enter the camcorder preference setting pages Select settings based on your later recording requirements Press Menu button again to exit the setup pages STEP 6 Before shooting please check battery and SD memory card indicator again to ensure the camcorder is in perfect condition STEP 7 Press the red shutter button to start shooting The shooting time will display on the upper right corner of the LCD display Press the shutter again to finish this shooting STEP 8 Use the button to enter playback mode and check the recording STEP 9 The camcorder also supports still photo shooting and audio recording Press M button to switch among video recording photo shooting audio recording and playback modes STEP 10 Rotate and close the LCD display to turn off the camcorder Note We do recommend using alkaline or Ni MH battery for power supply Please NEVER use different types of batteries or mix use old and new batteries 1 Overview Thank you very much for choosing this digital product Before using the same please peruse this manual careful
6. Interval Repeat 28 j 1024x768 640x480 Negative Red Ms Green Back A 6k Ent i 2048x1536 Effect To add display effect to the current still image including B amp W Sepia Negative Red Green Blue Binarize Sunset Cold and Contrast Note that it will generate a new image file when you apply an effect on the current still image Rotate To clockwise rotate the current still image by 90 degree It will generate a new file at the end of file list if you Save a rotated image Select Back to exit to the rotation function Resize to change the resolution for the current still image This operation will generate a new file at the end of file list 20 Add Voice Memo To record a voice memorandum for a selected image After the voice recording there will be a voice memo indicator shown on the left of the screen In addition a video file will appear at the end of the file list Start up image To set a selected image as personal start up image for the camcorder Note the selection takes effect only the system Start up Image setting is as My Image refer to the System Setting options 3 0 4 System setup In any mode press Menu key to enter setup pages then press A to enter system settings Auto Review Power Frequency Power Save Date amp Time D Bee Sounds M To set up sound related options _ Shutter such as shutter sound startup is
7. Mode to turn off the self shooting default or set self timer as 2 seconds or 1 seconds A burst shooting mode is also available Effect to add a color effect to the still images or to turn the effect off default The effects include B amp W Sepia Negative Red Green and Blue Date Stamp to set date stamp mode showing date only or both date and time The default is off 26 3 Playback Mode settings In the playback mode press Menu key to enter the setup menu shown below and use T W key to make selection and OK key to enter the submenu or use Menu key to go back to upper level menu Delete Effect Rotate Resize Lock ALL Unlock ALL 2 1 Lock To lock video audio image files and prevent them being deleted It shows a Key icon at the top left corner of the screen if the file is locked e Lock Unlock One to lock an unprotected file or unlock a protected file e Lock All to set all files under protection e Unlock All to release all files from protection status Delete To remove the file from the memory card or internal memory e One to delete the current file e All to delete all files from the memory Slide Show To display still images at a selected interval default 1 sec e Start select it to start the slide show e Interval use A Y key to adjust the slide show interval from 1 sec to 10 sec e Repeat use 4 key to switch repeat mode on off
8. OLIN Live Now Table of Contents Quick Installation Guide 01 1 OVEPVICW cccccecececcececeseceeeeceeeeeeeeseeeeeveeaeeevenenes 03 2 Regular cautions 03 3 Packing Content 05 4 Getting familiar with digital video camcorder 06 5 SPSCIPICATIONS ccccseceseessecrsecureessenusecurensscanenss 11 6 Basic functions 12 M VI SO co di E 12 2 Photo shooting AO een 13 DJAudio co ne ee ee 14 4 PlayDaCk cccccccceceeeeceeeeeeueeevaeeeeueeueuueuveeeaeeneaeeneas 15 5 Digital ZGOMINd 2 eee ce see ecce eceu 16 6 Self shooting and consecutive shooting 16 7 F lashinq a 16 8 Removable diSk 16 OPO CNE ieee ee eee eee nee 17 10 Video output function sise 17 11 Battery power indication 17 7 Mustration to the LCD indicating 18 8 Setup menb d esse 21 1 Video Recording Mode Settings 21 2 Photo Shooting Mode Settings 23 3 Playback Mode settings 21 4 System Setup cccecececececeeeveveveveveveseveeeeevevevevevenaness 31 9 Installation of drive software 35 10 Questions and answers 37 Olin DVC 240 User Manual V1 OLIN Products DVC 240 Quick Installation Guide Designed to make the device setup procedure easier STEP 1 Remove the digital video camcorder and the alkaline battery pack from the packaging STEP 2 Slide open the battery cover place
9. ded in the package lf any items are missing please contact your local dealer Contains the following components Digital Camcorder 1 USB Cable 1 User s Manual 1 AV OUT Cable 1 Warranty Card 1 CD ROM fg 4 Getting familiar with digital video camcorder 1 Wrist Strap Hole 2 Lens F2 8 f 9 45mm Let light through to capture images 3 Power ON OFF Turn the camcorder on off 4 amp Flashlight key Only available at the photo shooting mode Manually select flashing mode refer to the LCD indicating page 19 5 DISP Key Circularly select from LCD display on with indicating to LCD display on without indicating to LCD display off 6 4 key mw Inthe video recording mode manually select the movie definiton refer to the LCD indicating page 20 m Inthe photo shooting mode manually select the shooting mode refer to the LCD indicating page 18 m n the audio recording mode press to the pause a running audio 7 Shutter m n the video recording mode start and stop a video recording m In the photo shooting mode press to take a photograph m n the audio recording mode press to start and stop a running audio recording 8 T W key m n recording shooting mode from far to near mE In setup mode to highlight an available option 9 9 1 OK CONFIRM Key Directly enter playback mode from recording shooting modes E OK Confirm key
10. default or Spot White Balance to set auto white balance default or manually choose the balance Rae Gaon mode for Daylight Cloudy ie Cid Fluorescent or Tungsten Fluorescent Tungsten 22 2 Photo Shooting Mode Settings In the photo shooting mode press Menu key to enter the setup menu shown below and use T W key to make selection and OK key to enter the submenu or use Menu key to go back to upper level menu Resolution Quality Metering White Balance Exposure Resolution to set still image resolution as 12M 4000x3000 ee ae 5M 2592x1944 default ae 3M 2048x1536 1024x768 1M 1024x768 640x480 or VGA 640x480 23 Daylight Cloudy Li Fluorescent Tungsten wF 24 Quality to set the compression level of the still images such as Super Fine Fine default or Normal Metering to choose preferred photometer mode as Center Multi default or Spot White Balance to set auto white balance default or manually choose the balance mode for Daylight Cloudy Fluorescent or Tungsten Self timer 2S Self timer 10s Bu rst B amp W Sepia Negative Red Ente 29 Exposure to adjust the exposure value for lic or dark images The range of exposure level is between 2 0 an 2 0 The positive values are for k light backlit portraits or text the negative ones are for spot lighting reverse text or low lighting Driver
11. ing page use 4A keys to move the cursor and use T W key to adjust the value Then press OK key to confirm the setting The date and time would be used for Date Stamp function 7 Illustration to the LCD indicating On the LCD the information relating to shooting functions and options is shown 1 Working mode Video Photo Audio Shooting Recording 772 Ro e m 2 Shooting mode Self shooting 2s Self shooting10S 5 Exposure mode EV40 LEV 03 EV 0 7 EV 1 EV 1 0 EV 1 EV 1 3 EV 1 7 T _EV 2 0 6 Flashing mode Compulsory Auto flashing 7 Number of photos remaining number 8 Image quality extremely fine fine normal _ 9 Image size 4000x3000 2592x1944 2048x1536 1024x768 640x480 19 10 Movie definition 1280x720 720 480 640x480 320x240 HD 11 Battery display 20 8 Setup menu 1 Video Recording Mode Settings In the video recording mode press Menu key to enter the setup menu shown below and use T W key to make selection and OK key to enter the submenu or use Menu key to go back to upper level menu Frame Rate Metering White Balance Movie Size pe to set video resolution as a ee 1280x720 720x480 Cee oe 640x480 default or 320x240 320x240 21 Frame Rate to choose video frame rate between High 30fps default and Low 15fps Metering to choose preferred photometer mode as Center Multi
12. k Setup it will appear Installshield Wizard click Next and Install and Finish The installion will be completed It I LT oo Seg p EE fui CRT Eigi Welcome bo the Wizard for GSPCAISZE PC D The Insta hed isa ne on you compuier Toconbrue 39 APLAIUSE PL Driver Intal Shield Mizard Ready to brstall the Progam The weard ig ready bo begin mstalation Click Install to begin the installation Fone Nene ve NEEE A He ma Click Cancel to exit we SPCA1528 PC Driver InstallShield Wizard InstallShield Wizard Complete The InstallShield Wizard has successfully installed SPC41528 PC Driver Click Finish to exit the wizard Before connecting the camera to computer the camera driver program must be installed first 36 0 Questions and Answers Press shutter key without Video or photo Video photo Turn off automatically Battery DV and Battery DV turns off automatically Exhaust battery power quickly DV or Battery is extra hot The pictures 1 The battery is low power please change new battery 2 You don t turn the right mode please check and correct 3 Please open DV again 4 The memory card is full please cancel useless files or change memory card 1 Beyond 60 seconds or 2 minutes saving power setting 2 The battery is without power 1 Temperature is low 2 The battery power is low before using 3 Flash m
13. ly This unit can not only be used to shoot photos and videos but also be provided with built in PC camera functions For the external SD or MMC cards 32 MB 8GB the only thing you need to do is to connect the unit to the computer with USB line and an icon for removable disk will appear on the screen then you can copy the photos to the computer directly If you use the built in PC camera functions you can carry out on line video chatting with others through the Internet 2 Regular cautions 1 Before taking important photos such as wedding ceremony or vacation please make trial for several times to ensure that the camera is in perfect conditions Westwell shall assume no responsibility for any extra loss due to the obstacles of this product such as any loss as a result of lost pictures 2 Never use batteries not complying with the provisions in this manual for such use may lead to explosion or leakage of batteries cause fire personal injury or defile the battery cabin When installing the batteries please pay attention to the poles to ensure the correct installation If the unit is not used for long please take out the batteries otherwise it may lead to explosion or leakage of batteries cause fire personal injury or defile the battery cabin In case of leakage of liquid please carefully clean the cabin then install the new batteries If you have touched the leaked liquid please carefully clean you hands 3 3
14. nd LCD screen would be turned off for a while The system indicator keeps flickering till the charging is finished Then the LCD screen will be normal Pressing the key twice and the camera will exit from flashing mode 8 Removable disk Starting the computer and using USB line to connect the camera and the computer pressing the power key and at this time the power indicating light will be on and MSDC shown on LCD the unit works with the Removable disk the USB mode shall be set to MSDC mode in system setup 9 PC CAM Please first install the drive from the disc before connecting the camera to PC after finished use USB cable to connect the camera to PC PC CAM is shown on LCD the unit must be set to PC CAM unter the USB Mode or press M key to switch 10 Video output function Inserting one terminal of AV cable to the AV jack of the camera and connect another terminal to the TV select PAL or NTSC system and at this time the LCD display of the unit will be turned off 11 Battery power indication If the icon for battery on the down left corner is only one case the camera cannot enter flashlight mode while the other functions remain unchanged when the icon shows the power is fully empty and flickers continuously the power is insufficient and the system will automatically shut down in 5s 12 Date and Time Setting Date and time would need to be reset after each battery replacement In the Date amp Time sett
15. ode exhausts power quickly Use the DV for along time 1 You can adjust Expose Value HICTIRES are unclear 2 When you are using the DV unsteadily Delete Con t deletefiles Lockthefiles please open the lock and then delete Don t operate SD Card is protected you can cancel SD Card protection and then operation SD Card SD Card don t be Direction is wrong inserted Time Time setting is wrong please set it again Downloading Can t download AVI JPG Your computer s system is windows 98 don t install driver please install driver and then to download 37 Copyright This manual contains information protected by copyright law No part of this document may be used or reproduced in any form or by any means or stored in a database retrieval system without prior written permission from us The information of this manual is based on the current version of the product We reserve the right to alter the content without prior notice All brand names in this manual are the property of their respective owners Specifications and manual are subject to change without prior notice 38 Need some help Call our toll free Customer Helpline today Customer Helpline 1800 656 630 Or visit our website www olinlivenow com au Qp HIT CONNECTING EAST TO WEST Westwell Australia a Ltd Westwell and its s ms ed logo are registered with the Australian IP office OLIN is a registere of
16. ording Under video mode pressing MODE key twice and the unit enter the audio recording mode as shown in the following sketch In this mode click key to start the audio recording and the recording time is shown on the LCD Press A key to pause the running audio recording Press the key again to continue Click key again audio recording will be stopped 14 4 Playback Under video recording mode pressing MODE key for three times the unit enters playback mode as shown in the following sketch Press A V key to select the previous or next media file Note that all files such as video photo and audio files are stored sequentially Press DISP key to enter the thumbnail mode Use T W key to move up and down and use 4 to move left and right Then press OK key to go back to full screen mode and press OK key again to play a video audio recording 5 Digital zooming In shooting mode pressing T key the object may be amplified to 1 to 4 press W key and the object may be zoomed out from 4 to P 6 Self shooting and consecutive shooting _ In photo shooting mode press Akey once to enter 2s self 2 Sa ong pressing ne same 3 Key twice it enters 10s A pe Li and for the fourth time it returns to single shootin mode 7 Flashlight 2 When press flashlight key in photo shooting mode the camera will enter the compulsory flash mode In this mode the flashlight may need being charged a
17. tone button beep and playback ee volume Use 4 key to adjust the settings e Shutter to switch the sound of shutter On Off e Start up to choose start up tone or turn it off e Beep to turn the key beep sound On Off e Volume to adjust playback volume setting Volume 3 Auto review To set the delayed time for auto review function or turn the function off Auto power off To set up auto power off timer as 1min 3mins or 5mins Date and time To set up auto power off timer as 1min 3mins or 5mins 3 2 System My image i TR TV OUT To select the AV Out TV system either PAL default in Australia or NTSC USB To adjust the USB device mode as MSDC Massive Storage Device Class or PC CAM Note the PC CAM function may work with the software provided with the unit Start up Image To select start up image source as System or My image e Off turn off the start up image display System use factory default image as start up logo e My Image use personal still image as start up logo 33 Format To format the current used memory internal memory or SD memory card Note the format commend will delete all files in the memory Be careful of this action Reset All to restore factory default settings 34 9 installation of drive software Inserting the CD ROM disc into the drive then double click my computer click CD ROM and double clic
Download Pdf Manuals
Related Search