Home

Manual

1. AND ACTIVATING THE SYSTEM Do not connect the power lead until the speaker connections have been secured Before connecting the system please make sure that the power switch marked 9 on the rear panel is switched off and that the controls 2 3 4 are rotated fully anti clockwise this avoids sudden very loud signals that could damage your speaker s when you power the subwoofer 0088 tight bass treble volume input left tight output SoundArt SOUND YOU LJ power inlet power 230v 2 Q made in england caution to avoid risk of electric shock do not remove panel no user serviceable parts inside page 6 Connect the left speaker to the left set of terminals 5 and the right speaker to the right set of terminals 6 on the back panel of the subwoofer Connect the stereo phono lead to the inputs 1 on the back panel and then connect the other end to the corresponding outputs on your CD Player etc For some music sources you may need a specific type of lead which you can purchase from any reputable audio system dealer Plug the mains lead into the mains connector 7 on the back panel then power the system up by switching the power switch 9 to the ON position On and 0 Off the LED 8 Light Emitting Diode on the back panel should illuminate to indicate that the system is powered up and ready to receive an audio signal Set the master volume control 4 on the b
2. purchaser is entitled to a 2 YEAR WARRANTY from date of purchase Within this two year period we undertake at our option to either repair or replace any component parts found to be faulty free of charge Our warranty is subject to your compliance with the following terms and conditions This warranty certificate will not apply to the system if a it has been explicitly or implicitly modified or repaired in any way by a persons other than technicians of this company or b it has been damaged through misuse negligence accident or natural calamities If the product fails to function after the warranty period has ended or the product fails under conditions other than those covered then the purchaser Is welcome to return the product for service such service will be at the purchaser s expense The product will be serviced or repaired at the then current price for parts and labour If service or repair is required the purchaser is responsible for the transportation of the product to and from our service centre No other warranty guarantee certificate will be recognised by the Company This warranty certificate is not transferable In the event of change of address telephone number or other such contact reference the purchasers page 8 should inform the Company in writing as soon as possible This warranty is in lieu of all other warranties expressed or implied including without limitation any implied w
3. SoundArt Ss OUND YOU SEE 2 1 Sound System User Manual Introduction The SoundArt 2 1 Sound System represents the latest in speaker technology In brief we have designed a discreet system to achieve outstanding acoustic performance by harnessing a compact active amplified subwoofer with customised circuitry to drive a pair of unique full range passive flat panel speakers Please read this manual and follow all instructions when installing to ensure you get the very best performance and enjoyment from your new system gt gt General Precautions To prevent the enclosure from warping or discolouring do not place the system where it will be exposed to direct sunlight or excessive humidity To prevent fire or electric shock do not expose the system to dripping or splashing Do not place the system in a location of extreme low or high temperatures or extreme changes in temperature Sources of heat such as near commercial heaters fires or other sources of heat Do not place the following objects on top of any part of the system i e glass china fragile objects burning candles etc If glass etc falls by vibrations or unsteady surface and breaks it may cause damage to the unit and or personal injury Do not put a vessel with water or other such liquid etc on it f the vessel falls by vibration or unsteady surface and spills iquid it may cause damage to he unit and
4. ack panel to the 12 o clock position and press PLAY on your music source i e CD player that you have chosen to connect to the input At this point you will hear NO sound Now slowly adjust the treble control 2 on the back panel clockwise and you should hear the sound from your main left and right speakers get louder keep turning the control until it is at a level that you are comfortable with and then leave the control in that position ow slowly adjust the bass control 3 on he back panel clockwise and you should hear the bass output from the subwoofer get louder keep turning the control until he bass reaches a level that you feel matches the output from your main left and right speaker then leave the control in this position Initially you may have to adjust the bass and treble controls to reach the balance you are happy with once they are set it is then best to leave them alone and adjust the volume by using the master volume control Not all recordings achieve the same reproduction quality therefore you may hear slight tonal differences this is not a fault of the system page 7 Warranty Certificate The SoundArt 2 1 Speaker System has been manufactured to a high standard with careful quality control at all stages of manufacture and assembly This is to certify that the system identified on this warranty certificate is free of defects in materials and workmanship Under the warranty agreement the original
5. arranty of merchantability or fitness for particular purpose all of which is expressly disclaimed To the fullest extent permitted by applicable law the manufacturer and any company in the distribution channel hereby excludes liability for any consequential damages or loss resulting from the use of this product or resulting from an inferior poor or bad connection of the product components also inferior poor or bad mounting and or hanging of the product Note Please keep this warranty certificate for your record and to arrange Service or repair in the future Service problems should first be discussed with the studio from whom the product was originally purchased Please retain your original receipt as this will be required should you require warranty Service
6. ing on the AC cable may damage the wiring or the mains socket on the amplifier Always power down the amplifier and switch off before making any connections It is dangerous to use any power cable that is cut or frayed If he power cable is damaged stop using it immediately and have it repaired or replaced Do not plug in or unplug the AC adaptor with wet hands Doing so may result in a dangerous electric shock Do not remove the amplifier or ouch any parts inside Doing so may result in a dangerous electric shock and could damage the delicate electronic circuits The voltages inside the amplifier are very dangerous Do not let water or other liquids flammable materials or metal objects such as pins get inside any of the input sockets such items can cause an electrical shock or short circuit the amplifier and damage it If the amplifier should become wet unplug the AC adaptor from the AC outlet at the wall first and contact the manufacturers directly There are NO user serviceable parts inside STEP ONE UNPACKING YOUR SOUNDART 2 1 SPEAKER SYSTEM The system is made up of the following components please inform your supplier immediately if any items are missing 1 x active subwoofer 2 x canvas picture panel speakers or 1 x single stereo panel depending on your purchase 1 x power cord with moulded plug 25 x flat speaker cable with transparent adhesive backing 1 x 5 metre stereo phono connecti
7. ng cable lt e canvas picture panel speaker s subwoofer stereo phono power cord with connecting cable moulded plug flat speaker cable page 3 STEP TWO WALL MOUNT YOUR SPEAKERS The SoundArt picture panel speakers have been designed to be mounted flat on to a wall using a simple screw fixing inserted k into an appropriate wall plug STEP THREE PLACEMENT OF SUB WOOFER Position the subwoofer where it is practical near to a mains power supply close to the speakers on the wall and the music source being used i e CD player MP3 player etc The subwoofer does not require specific placement as long as everything can be connected and the visual impact is satisfactory page 4 STEP FOUR MOUNT FLAT SPEAKER CABLES TO THE WALL Once you have hung your speakers and placed your subwoofer you then need to mount the speaker cable from the speaker connection point at the back of the speaker and down to the floor for connection to the speaker termination points on the back of the subwoofer To maintain correct phasing ensure you connect the to and to You can use other suitable speaker cable and conceal cable behind plastered walls cavity walls or similar the supplied cable is the neatest solution we have found if you do not wish to go to the time trouble and expense of hiding cables f Q page 5 STEP FIVE CONNECTING
8. or personal injury Do not place the system where foreign objects such as water drips might fall It might cause fire damage to the unit and or personal injury Do not place the system where they are liable to be knocked over or struck by falling objects Stable placement will also ensure better sound quality page 2 Secure placement or installation is the owner s responsibility SoundArt will not be liable for any accident caused by improper placement or installation of the system If at any time you note distortion reduce the volume immediately Make sure the connections are secure make sure the input power does not exceed the maximum specified otherwise internal damage may occur Do not attempt to clean the system with chemical solvents as this might damage the finish Only use a clean dry cloth Do not attempt to modify or fix the system contact qualified service personnel when any service or repair is required Do not open the cabinet enclosure for any reason Placing the units too close to a television or other such monitor may impair the TV picture quality If this does occur move the system away from the TV until no interference is present Do not install the system in locations where electrical voltage varies When unplugging the AC adaptor from the outlet be sure to grasp the adaptor Attempting to unplug it by pull

Manual

Contents

Download Pdf Manuals

Related Search

Related Contents