PDF - Tornado Industries
Contents
1. Switch Trigger left hand Used to switch motor ON and OFF Can only be operated with handle in working position and if left hand interlock button has previously been pressed g Interlock Button left hand This must be pressed initially to enable left hand switch trigger to switch the motor on Switch Trigger right hand Used to switch motor ON and OFF Can only be operated with handle in working position and if right handle interlock button has previously been pressed Interlock Button right hand This must be pressed to enable right hand switch trigger to switch the motor on Handle Adjustment Lever Battery Life Indicator Used to adjust handle to comfortable working Gives indication of battery life available height Note For safety Reasons the machine cannot be operated unless the handle is moved to a working height F a Solution Feed Lever Battery Charge Indicator Lights Operates flow valve in spray bottle if fitted Shows charge state of battery Pull lever to release solution Release lever to stop flow Key Operated Switch Battery Charging Lead Switches battery power ON and OFF Connects machine to electricity supply for battery charging Fitting the Pads WARNING THIS APPLIANCE HAS BEEN DESIGNED FOR USE WITH QUALITY BURNISHING PADS ONLY THE FITTING OF INAPPROPRIATE PADS MAY AFFECT ITS PERFORMANCE AND SAFETY Make sure the machine is switched OFF by the key operated sw2. specified here except as shown below For full details contact your Authorized Tornado Distributor Service Center 1 Year or the Tornado Service Department Labor on all tornado cleaning equipment except as shown below Tornado sales and services representatives are not authorized to waive or alter the l Year terms of this warranty or to increase the Warranty on batteries and chargers obligations of Tornado under the warranty one year pro rated All battery warranties are handled by the battery manufacturer please call customer service for more information Thank you for choosing Tornado products We are proud to offer the most complete line of commercial and industrial cleaning equipment in the industry Our reputation for quality innovation and durability is unsurpassed Effective January 1st 2008 Terms subject to change without notice 1 Windshear Blower Dryers Insulation Blowers CK LW 13 1 CK 14 1 CV 30 CV 38 Pro PAC Vacs PV6 Back Pack Duo Upright Carpetkeepers and all chargers are warranted for one year for both parts and labor 2 Warranties on the EB30 are 90 days batteries chargers parts accessories Warrantieson all riding sweepers including the ICC1 KM100 100 R KMR 1250 and KMR 1700 are 24 months parts 6 months labor OR 1000 hours of operation whichever comes first Warranties on all riding scrubbers including the 75 140 amp 90 140 are 24 months parts 12 months labor OR 1000 hours of opera
3. B A Weight with batteries 138 lbs Weight without batteries 50 lbs Accessories Part Part No Description Spray Kit System 05 4156 0000 Spray Cleaning Attachment Fault Diagnosis module supply cord and plug module is lit Machine not working Switch interlock incorrectly Check operating procedure operated instructions Current overload fuse blown Contact service agent Machine wobbles or vibrates Pad worn or damaged Renew pad excessively Pad centered on drive disc Place pad in correct position Pad dirty Clean the pad Incorrect pad selection Contact pad supplier
4. TORNADO INDUSTRIES LLC 7401 W Lawrence Avenue Chicago IL 60706 Ph 708 867 5100 Fax 708 867 6968 www tornadovac com Oromado Operations amp Maintenance Manual MODEL NO 98494 Tornado 17 Battery Burnisher L9736 Tornado Industries LLC 2008 All Rights Reserved Table of Contents INCAS E Aa General IntonmacoO aim Important Sale ly dci a N A R E Guidelines Or the Operator usina lali arias Transportne the Machine atasca lianas Electrical Conte colina Control tna En E AO PRE PD O O E O A A ere ee tte cierrere Adj stine the Handle Herencia o ld lie ciao rio coas O A a sien hatte inatah eas otal Daa kash asett Pecennoe aes a it hee uaereeat sas mS eT AA ayo Ha cm MaC ga AAA A a Cree A Wty TEL eerRy Ma reerernr cee Smt eye rrrTeee A A A eerae DAT TERT oTeE Tmt SET Tne ote Dm TTT ETET Cee Om ere nT Tere Galore cli gore 10 AA a TRE RIOT SCRE Tm tee a OM trae ey Tere When Cleanine 15 Finished de tdo RecharomestheDalere Serie A A O Se eee O o e O eS sana EE EE UA o seneatiad tase ia tae E E E Electrical E Electronic Equipment Disposalainnn aida Technical SPCCMICAUON dai di dnd ACCS SOTI ES cita li il o A Baul IDiaSnOsIS ena sii ta Long term buyer protection warranties Tornado Standard Warranty Program 10 Years All plastic tanks and rotationally molded bodies Warranties do not cover components subject to normal wear or 2 Year abuse and misuse and have other On all Tornado components limitations not
5. ically capable to move transport and operate the machine Operators should be able to recognize unusual operation of the machine and report any problems Keep hands and feet clear of the rotating pad Wear suitable footwear and clothing Where possible implement job rotation and adequate rest periods for the operator s Do not smoke when using the machine This machine is for indoor use only Do not store outdoors or in wet areas Transporting the Machine CAUTION THIS MACHINE IS HEAVY e Do not attempt to lift the machine without mechanical assistance e Do not lift the machine by the operating handle or outer cover always lift from the chassis e Use a mechanical lift hoist or forklift and ensure the machine is securely in place before lifting Incorrect lifting techniques may result in injury e To move the machine to the work area lock the handle and tilt backwards to raise the front off the floor and wheel into position CAUTION BUMPING THE MACHINE THROUGH OBSTACLES CAN DAMAGE THE MACHINE SMALL OBSTACLES CAN BE OVERCOME BY PULLING THE MACHINE BACKWARDS Electrical Connection e Before connecting the machine to the power supply check that your supply voltage corresponds with that marked on the rating label IMPORTANT IF THE CHARGING LEAD IS DAMAGED IT MUST BE REPLACED BY A CORD PROVIDED ONLY BY THE MANUFACTURER OR AN AUTHORIZED SERVICE AGENT Controls The main operating controls are located on the handle
6. ing Solutions The choice of cleaning solution is at the discretion of the operator when assessing the surface to be cleaned Cleaning solutions are only recommended for stubborn marks and should not be used as a general cleaning aid When Cleaning is Finished e Switch OFF the machine raise cleaning head and remove pad e Wipe over the machine with a damp cloth e Check battery life indicator and recharge as necessary Recharging the Batteries e IMPORTANT Only recharge the battery when the battery life indicator is in the red zone two lights remaining e Note that when only 1 RED LED is showing on the battery life indicator the internal controller will disable the machine e IMPORTANT Opportunity top up charging will damage the batteries This will cause run time to fall and overall battery life will be affected AVOID TOP UP CHARGING e Take the battery charging lead supplied with the machine plug into the main supply ensure that the supply matches the rating plate e It takes approximately 8 hours to fully charge the batteries Battery Charge Indicator Lights e Two RED LEDs The first indicates that the power is on and the second indicates that the initial bulk charge is taking place e YELLOW LED indicates that the battery is now being charged on a constant voltage and that the battery is about 80 charged e GREEN LED shows when the charger has switched over to float charge and that the battery is ready for use The ba
7. itch and the key is removed before fitting or removing pads CAUTION IF SPRAY BOTTLE IS FITTED LOWER THE HANDLE GENTLY TO AVOID DAMAGING IT e Raise cleaning head bringing the machine to rest on storage castor e Remove pad retainer by unscrewing it e Press cleaning pad onto the drive board Secure the pad using the pad retainer e Return the machine to upright position Adjusting the Handle Height Select the most comfortable handle height using the adjustment lever and lock into position Operation Starting the Machine WARNING NEVER START THE MACHINE WITHOUT A PAD FITTED e Turn the key operated switch to the ON position e With the handle set at a comfortable working height and with both left and right hands on the handle press both interlock buttons with your thumb and squeeze both switch triggers to start the machine e Once the machine has started the interlock buttons can be released The machine will operate with either or both of the switch triggers held To stop the machine release the switch triggers e Normal movement of the machine is in a forward and backward position Burnishing e Fit pads suitable for the speed of the machine and the surface to be polished as recommended by the pad manufacturer e Apply cleaning solution to the floor in accordance with the manufacturer s instructions e Do not keep the machine rotating on one spot as this could cause overheating and damage the floor surface Clean
8. tion whichever comes first 4 All non wear item parts purchased after warranty expiration are warranted for 90 days 5 Warranty starts from the date of sale to the consumer or 6 months after the dealer purchased the unit from Tornado whichever comes first 1 800 V ACUUMS Chicago area 708 867 5 100 Note Tornado The Latest Dirt Carpetkeeper Carpetrinser Fax 708 867 6968 Carpetrinser Dryer Headmaster Taskforce PAC VAC T Lite Glazer 7401 W Lawrence Avenue Windshear Max Vac CV 30 CV 38 and Trot Mop are trademarks of Chicago IL 60706 Tornado Industries z Form F2665 Rev 1 16 08 IH 2008 All rights reserved General Information This commercial battery powered Cordless Burnisher is the latest innovation at the forefront of daytime cleaning Its quietness of operation and compact design makes it ideal for use in a variety of environments It is especially suited for use on hard floors in hotels schools hospitals factories retail shops stores and offices Maintenance free gel batteries must be used which provide up to 2 hours running time A battery life indicator allows the operator to assess the degree of battery life available An on board battery charger provides a convenient way of charging The machine can be fitted with an optional handle mounted cleaning solution spray system which can be operated while gripping the handle with both hands maintaining full control of the machine The following instruc
9. tions contain important information about the Tornado Cordless Burnisher and safety advice for the operator Equipment must be operated serviced and maintained in accordance with the manufacturer s instructions If in doubt contact the supplier of your machine Important Safety Advice When using electrical equipment basic safety precautions should be followed including the following e Read all instructions carefully before use e Keep children and unauthorized persons away from the machine when in use e Do not leave the key in the switch when not in use e Do not operate the machine if it malfunctions or is damaged in any way Contact an authorized service agent for repair or adjustment Do not operate the machine when connected to the electrical supply e The key of the operating switch must be removed before cleaning or doing maintenance on the machine e To unplug pull the plug and not the cord The battery charging lead needs to be regularly inspected for signs of damage If the lead is damaged it has to be replaced When recharging make sure the area is ventilated Do not use where hazardous dust is present Do not use in near flammable areas Be careful when using the machine near stairways Guidelines for the Operator e Operators must be fully trained in the use of the machine in accordance with these instructions able to perform user maintenance and the correct selection of accessories Operators should be phys
10. ttery should be left connected with a GREEN LED list until the battery is required for use e IMPORTANT CHARGE ONLY IN A WELL VENTILATED AREA e THE CHARGER IS SET FOR GEL BATTERIES ONLY e DO NOT OPERATE THE MACHINE WHEN CONNECTED TO THE MAIN ELECTRICAL SUPPLY Storage Always switch off and wipe down and dry the machine after use Store the machine in a dry indoor area only Maintenance WARNING BEFORE DOING ANY MAINTENANCE OPERATIONS OR ADJUSTMENTS SWITCH OFF THE MACHINE AND UNPLUG IT FROM THE ELECTRICAL SUPPLY The machine requires minimum maintenance apart from the following checks by a trained operator Charging Cord and Plug Regularly inspect the sheath plug and cord for damage or loose connection IMPORTANT All other servicing and repairs should only be performed by an authorized service agent IMPORTANT Should the machine fail to operate please refer to the fault diagnosis section in the back of the instruction manual If the problem or remedy is not listed please contact an authorized service agent Electrical amp Electronic Equipment Disposal Improper disposal may be harmful to the environment Please refer to your local waste authority for information on return and collection systems in your area Technical Specification Charging Voltage 100 230V Voltage 24V Motor Rating 65HP Working Width 17 inches Pad Diamter 17 inches Pad Speed 1500 rpm Handle Height 42 inches Sound Pressure Level 57 d
Download Pdf Manuals
Related Search