Inversible Manual
Contents
1. agua li P L AT s Pk Stop Read this manual carefully before using this product Manual Covers The Maximum Maximum Following Products Capacity Suggested Weight Load Inversible 1000 Ibs 454 kg Eight 8 Contents Inversible 1 Inversible tube 1 Repair Kit Watersports Safety Code Watersports are fun and challenging but involve inherent risks of injury or death To increase your enjoyment of the sport and to reduce your risks use common sense and follow these rules Before you start e Familiarize yourself with all applicable federal state and local laws the risks inherent in the sport and the proper use of the equipment Know the waterways Use caution and common sense Do not use in recreational swimming pools within 3 0m 10ft of commercial pool edge or within 4 5m 15ft of boats docks or other hard obstructions Do not attempt or allow somersaults Landing on the head or neck can cause serious injury paralysis or death Never use at night or in low light conditions Never use in poor weather conditions excessive wind waves or lightning Do not use on dry land Do no use without proper anchoring Do not jump or dive from the product Never swim under the product Take extreme care when swimming between the shore and the product Be cautious of any boat traffic or other obstructions Ensure all users are capable swimmers and are not excessively fatigued Do not allow a2. Monthly application while the product is in use is required NOT DOING THIS WILL VOID THE WARRANTY 303 UV Protectant is available at most watersports dealers or online at www 303 products com 2 WARNING Certain products especially petrolium based solvents cleaners and protectants such as ArmorAll can damage the product and use of these products will void the warranty 3 WARNING Use of a high pressure washer will damage the product and void the warranty To clean use a soft bristle brush with mild soap and fresh water 303 UV Protectant contains a safe for vinyl cleaner and can be used to clean and protect the product at the same time 4 Check the inflation of your tube often Check for proper air pressure using a manometer It may appear to have lost air early in the morning but will expand once the sun warms it Maximum expansion will occur in the heat of the day Proper inflation is critical to the safe operation of your product and will prolong damage from wear Storage 1 Before storing place the product on a clean level area Clean with mild soap and water and allow to dry completely Apply 303 Protectant to the surface of the INVERSIBLE before deflating 2 Remove all attachments and store in a sealed water proof container i e a plastic covered box or bin 3 Remove ALL of the air from the tube using the deflation end of the high output inflator deflator 4 Fold the deflated tube in thirds then roll loosel
3. PVC safe antifouling paint should wi be used to help protect this product against marine gro EXPOSURE TO SALT WATER IS NOT COVERED BY WARRANTY agua iii P LAT P gt ads Assembly 1 Locate a flat dry area with access to electrical outlet or extension cord The best setup position will also make launching easy so ideally the Inversible tube should be carefully carried into position at the water s edge NOTE Dragging or sliding the Inversible over ground either before or after inflation can cause damage 2 Once in the setup launch position unfold the Inversible completely and locate the Main Valve The Main Valve is located near product Warnings Twist the valve stem 90 degrees to open or close the 1 Way valve feature See diagram for details 3 Using a high output inflator deflator place the inflation hose with proper adap tor into the valve Inflation times can vary by inflator but the tube should be firm and tight when completely inflated In hot weather be sure to leave room for air expansion DO NOT OVER FILL Inflate to 1 2 psi 0 083 bar or until tube is firm and tight Check for proper air pressure using a manometer Close the valve and secure valve cap WARNING Do not use an air compressor to inflate tube Air compressors are designed for high pressure inflation and can cause tube to burst if over inflated 4 Orientation Inversible can be used in soaker mode see image this page which allows us
4. in waves or shore break and damage caused days If the product is covered under warranty it i panied by anything other than defects in materials and will be returned to the customer at the expense of chase in the form of the original invoice workmanship Aquaglide Inc after repairs can be made If not R the customer will receive a quote for repair and e a E E ha his 6 This warranty is voided if any unauthorized or replacement as well as any necessary cleaning repair change or modification has been made to and shipping charges The customer will have any part of the equipment Authorization for such 30 days to accept the quotation At the end of 30 must come in writing from Aquaglide days or upon refusal of the quote Aquaglide will return the product in the condition in which it was 7 The warranty for any repaired or replacement received at the customer s expense The customer cover use in schools or rental operations Warranty term for commercial use is 1 year 3 Aquaglide will make the final warranty determi nation which may require inspection and or photos i eguipment is good from the date of the original agrees to authorize Aquaglide Inc to charge the ofthe practic Geary show dels We purse a customer cet card for any coste not covered choice freight prepaid or by email to warranty under the terms and conditions of the Aquaglide aquaglide net 8 Any warranty claims must be accompanied Warranty by the original
5. otherwise mutually agreed to by all parties The submission to the American Arbitration Association shall be unlimited and the arbitration award may be enforced by any Court of competent jurisdiction BINDING EFFECT OF AGREEMENT In the event of your death or incapacity this Agreement shall be effective and binding upon your heirs next of kin executors adminis trators assigns and representatives ENTIRE AGREEMENT In entering into this Agreement you are not relying upon any oral or written representations other than what is set forth in this agreement and the North Sports Inc and Aquaglide Inc Owner s Manual Aquaglide Inc warrants products to be free by Misuse abuse neglect or normal wear and rization number RA is given by Aquaglide in of defects in material or workmanship to the _ tear including but not limited to punctures advance The RA number must be on the outside original purchaser for a period of Three 3 dragging the product over the ground damage of the package or it will not be accepted at our years from date of purchase This warranty due to excessive sun exposure or seam failure warehouse Freight on the returned product must is subject to the following limitations due to overinflation in the sun damage caused by be prepaid or it will not be accepted Upon receipt improper handling and storage damage caused by Aquaglide will make a determination within 30 1 Warranty is valid only with dated proof of pur use
6. ad the owner s manual and instruct all users in the safe operation of these products By inflating these products you hereby agree to the Release of Liability Claim Waiver and Assumption of Risk Agreement in the Owner s Manual To reduce the risk of injury or death follow these guidelines Carefully read the product Owner s Manual and follow the instructions Take all reasonable precautions in the use and operation of your trampoline and or aquapark Teach anyone using your trampoline and or aquapark about safe guidelines prior to use Know your own limits Stop when you are tired Act responsibly Be in good physical condition and be cautious in your use of this or any other water sports product e Periodically check mooring bridles and or lines to ensure safety Replace any portion of mooring and or connection system that shows signs of wear Do not add any hardware or attachments not otherwise supplied by the manufacturer THE WARNINGS AND PRACTICES SET FORTH ABOVE REPRESENT SOME COMMON RISKS ENCOUNTERED BY USERS AND DOES NOT PURPORT TO COVER ALL INSTANCES OF RISK OR DANGER PLEASE USE COMMON SENSE AND GOOD JUDGMENT Please contact the dealer or manufacturer of this product if you have any questions about proper selection function or safe use of this product Made in China Always check security of the anchor s and all attachments before each use Always wear a life vest PFD as required by the au
7. ea making sure to cover the area completely Stay INSIDE the china marker outline b Using disposable brush apply a thin even layer of glue to the to the back of the patch making sure to cover the area completely c Allow glue to cure for approximately 60 seconds d Starting at one corner carefully align the patch over the repair area using the china marker outline as a guide Once the 2 surfaces touch the bond will be immediate so take care e sid at one corner and working outward carefully apply the patch to the repair area using very firm pressure f Rub the entire patch area and the edges of the patch using very firm pres sure g Allow to cure for at least 24 hours before inflating www Aquaglide net NOTICE Release of Liability Claim Waiver and Assumption of Risk Agreement By opening and assembling this product you are agreeing 1 to be bound to the terms set forth below and 2 to require anyone using this product to be bound by such terms If you are unwilling to be bound by these terms return this product before use for a full refund ASSUMPTION OF RISK Use of this product and any of its components involves certain inherent risks dangers and hazards which can result in serious personal injury and death In using the product you freely agree to assume and accept any and all known and unknown risks of injury while using this equipment The risks inherent in the sport can be greatly reduced by abiding by
8. ers to soak comfortably in shallow water or it can be flipped over 180 degrees for platform mode which keeps users above the water Before connecting optional acccessories such as boarding platform or i Log you must decide which way you will use the Inversible and place it in this position Always use at least 2 people to flip this item and be aware of wind which can catch the Inversible if handlers are not prepared 5 Inversible can be used with various boarding accessories depending on your specific needs For use in water over 4 ft 1 21m deep or for users who may prefer it we suggest one or more of the following optional boarding aquapark accessories a Swimstep 42 x 59 x 6 Inflatable boarding platform 58 5211016 b Swimstep Commercial 42 x 59 x 6 Heavy duty platform 58 5210003 c InterLoc Ladder 15 x 24 Webbing step ladder 58 5211036 d Runway 20 5 x 20 x 6 Inflatable walkway 58 5209214 e Runway 10 5 x 10 x 6 Inflatable walkway 58 5210004 f Splashmat 5 x 18 x 2 Inflatable splash mat 58 5211108 Depending on the application some users may have purchased an optional boarding aquapark accessory If you have an accessory connect it now using the instructions provided with the accessory NOTE It is best to attach such items while they are deflated Once fully attached with Interloc straps then inflate 6 To launch the product make sure to have a
9. es which indicate a leak 4 ms leak is confirmed dry the area well mark it and prepare to patch PATCHING Reinforced PVC Patch with high grade adhesive IMPORTANT leaks must be patched with the item completely deflated and patches must be allowed to cure for 24 hours 1 DEFLATE your Aquaglide Platinum product completely 2 ma cut PVC patch material to size using sharp scissors or razor nife a Patch should be least 3 5cm 1 2 larger than hole IN ALL DIRECTIONS around any air leak This means a minimum patch size of 5cm x 5cm 2 x 2 for a pinhole leak The larger the better b Square patches with rounded corners are usually best as this reduces the risk of peeling 3 Dry fit the patch over the area to be repaired to ensure good fit and coverage 4 Use a clean 120 grit sand a to rough up the surface to be patched AND ALSO the back of the patch material Aquaglide Inc 1 North Shore Dr SE White Salmon WA 98672 TEL 01 509 493 4938 FAX 01 509 493 4966 Repair instructions 5 Use solvent MEK or Rubbing Alcohol and a fresh cloth to clean the sanded areas removing all debris 6 Dry fit the patch again and use china marker provided to carefully outline where the patch will be located 7 Next use the glue provided Use a disposable chip brush to spread glue if needed Try to work neatly and quickly a Using disposable brush apply a thin even a of glue to the repair ar
10. f Liability Claim Waiver and Assumption of Risk Agreement in this manual Please read this manual prior to inflating and using these products and keep for future reference As with any action sport recklessness inexperience misuse or neglect of the equipment may result in serious injury or death A WARNING USE OF THIS PRODUCT AND PARTICIPATION IN WATERSPORTS INVOLVES INHERENT RISKS OF INJURY OR DEATH This product should never be used by children except under adult supervision Not intended for use by children under 5 years of age This product is not a personal flotation device Always wear a floatation vest PFD as required by the authorities in area of use Never place wrists or feet through handles straps or rings Do not use in water less than 48in 1 21m deep Do not use within 10ft 3 0 m of docks pilings boats or other hard objects Never swim under the product Do not jump or dive from this product Do not exceed the manufacturer s recommended number of users for your particular product Do not use while under the influence of alcohol or drugs Read Operator s Manual before use Made in China A CAUTION Watersports can be safe and fun for all levels of enthusiasts The Operator s Manual is presented to enhance your enjoyment of the sport It is intended to alert you to some of the potentially dangerous conditions that can arise in all watersports It is the owner s responsibility to re
11. nyone to attempt to swim to or from the product that are not physically able to do so Always ensure that the swimming area around the product is free of submerged logs rocks and sandbars Ask about the local water conditions before use Only allow use of the product with proper supervision Secure the product when not in use to prevent access by any other users Do not jump or dive from this item Do not jump onto this item from any other item Do not use in water where there are sharks or other animals that could pose a threat to humans If product is used indoors always ensure adequate ceiling height overhead Always remove personal items such as rings watches or other sharp objects before use Your equipment e Check all equipment prior to use Inspect your product for missing defec tive or worn parts Never use the product if excessive wear or damage are detected Always check for proper inflation before each use Temperature and environ mental changes can cause changes in tube pressure Using the product over or under inflated is dangerous and can cause damage to the product voiding the warranty Aquaglide Inc 1 North Shore Dr SE White Salmon WA 98672 TEL 509 493 4938 FAX 509 493 4966 inversibie Owner s Manual It is the owner s responsibility to read the owner s manual and instruct all users in the safe operation of these products By inflating these products you here by agree to the Release o
12. purchase receipt The name of the M retailer and date of purchase must be clear and Serial Number glide the warranty covers the repair or replacement legible All Aquagiide Platinum products are marked with of the defective product only Aquaglide will not a serial number near the main inflation valve 1 be responsible for any costs losses or damages 9 There are no warranties which extend beyond The serial number may be stamped into the PVC incurred as result f loss of use of pro duct the warranty specified here directly around the valve or it may be visible on a welded plate near the valve Please include Returns and Service Policy this number when you contact Aquaglide or your Product can be returned only if a return autho dealer with any warranty claim 4 If a product is deemed to be defective by Aqua This warranty does not cover damage caused Aquaglide Inc 1 North Shore Dr SE White Salmon WA 98672 TEL 509 493 4938 FAX 509 493 4966 www Aquaglide net
13. roduct Here are some general guidelines for anchoring your product These guidelines are not intended to replace the need for professional installation 1 Choose a location for your Inversible and or aquapark Place the product in at least 4 ft 1 21m of water depth in an area protected from the wind and boat traffic Review your lake rules and restrictions with your local authorities www Aquaglide net Cupholders set of 4 Interloc Anchor Rings set of 5 Interloc Anchor Rings set of 2 i Log 2 Carefully check the water and seabed below the selected area for sharp or dangerous objects i e rocks or stumps 3 Keep a safe distance from docks boats boat lifts and any other structures DO NOT tie the product to a dock Users could be injured by contact with hard structures and or the product could be damaged by abrasion 4 Anchors and anchor chain are sold separately We recommend a MINIMUM of 60 Ibs for short term anchoring of the Inversible in settled conditions Heavier moorings should be used on large windy bodies of water Profession ally installed ground screws are also acceptable 5 If strong winds or storms are expected it is best to remove the product from the water and secure and or deflate it Operation 1 This item is a soaking lounge for water use Users lounge or splash in shal low water When inverted users may rest aboard the item as a raft or platform This item must be u
14. sed with at least one Aquaglide Platinum boarding platform 2 When connecting multiple items use only Aquaglide Interloc straps and connecting rings according to the Interloc Strap instructions provided Make sure that the connection is tight and that there is NO GAP greater than 25mm 3 4 between items IMPORTANT Failure to connect these items properly may result in injury or death Aquaglide Inc 1 North Shore Dr SE White Salmon WA 98672 TEL 509 493 4938 FAX 509 493 4966 3 Do not exceed the product s recommended number of users or capacity 4 USE COMMON SENSE Never dive from the product Do not jump from the product while in shallow water Do not allow anyone to stand on the top of the product because motion could cause a loss of balance and injury 5 Ensure that all swimmers have cleared the area before entering the water Never swim underneath the product 6 If the product shows any signs of instability or appears to have lost air pressure immediately discontinue use Check and monitor moorings air pressure and air holding ability Do not continue use until these are confirmed Care and Maintenance 1 While your product has been initially treated with UV protectant long term exposure to sunlight will damage the product Regularly apply a UV protectant to the exposed surface of the tube to ensure the life of your product We recommend using ONLY 303 UV Protectant intended for use on vinyl for this purpose
15. t least 4 people evenly spaced around the product to help carry it NEVER DRAG THE PRODUCT YOU MUST LIFT AND SET THE INVERSIBLE IN THE WATER TO AVOID ANY ACCIDENTAL TEARING AND OR ABRASION Aquaglide Inc 1 North Shore Dr SE White Salmon WA 98672 TEL 509 493 4938 FAX 509 493 4966 inversiblie Owner s Manual ERSIBLE INVERSIBLE Main Valve Main Valve Anchoring IMPORTANT Proper anchoring is essential to the safety and performance of your product Due to the wide variety of conditions we advise using a profes sional skilled in mooring and anchoring and experienced with local conditions If improperly anchored the product can move and or float away Aquaglide Inc is not responsible for any damage injuries or losses due to improper anchoring NOTE There are 2 5 ring Interloc sets along the Inversible waterline in soaker mode and 1 5 ring Interloc set along the waterline in platform mode These rings can be used to connect various accessories and also for anchoring For Long term anchoring and or situations where high loads may be generated we recommend connecting the anchor line in a least 2 positions on the product This includes situations were Inversible is integrated into a larger Aquapark or may be exposed to waves and or strong winds For short term anchoring of the Inversible as a stand alone item under normal conditions it will be sufficient to connect the anchor line in one position on the p
16. the Warning Guidelines listed in this Owner s Manual and by using common sense RELEASE AND WAIVER OF CLAIMS AGREEMENT In consideration of the sale of the product to you you hereby agree to the fullest extent permitted by law as follows TO WAIVE ANY AND ALL CLAIMS that you have or may in the future have against North Sports Inc and Aquaglide Inc its distributors and dealers resulting from use of this product and any of its components TO RELEASE North Sports Inc and Aquaglide Inc from any and all liability for any loss damage injury or expense that you or any users of this product may suffer or that your next of kin may suffer as a result of the use of this product due to any cause whatsoever including negligence or breach of contract on the part of North Sports Inc and Aquaglide Inc in the design or manufacture of this product and any of its components ARBITRATION In further consideration of the sale to you of this product and any of its components you hereby agree to submit to binding arbitration any and all claims which you believe you may have against North Sports Inc and Aquaglide Inc arising from the use of any North Sports Inc and Aquaglide Inc equipment or products The arbitration shall be pursuant to the rules of the American Arbitration Association Arbitration shall be commenced within 1 year from the date on which any alleged claim first arose Further the arbitration shall be held in White Salmon Washington unless
17. thorities in area of use THE WARNINGS AND PRACTICES SET FORTH ABOVE IN THE WATER SPORTS SAFETY CODE REPRESENT SOME COMMON RISKS ENCOUN TERED BY USERS THE CODE DOES NOT PURPORT TO COVER ALL INSTANCES OF RISK OR DANGER PLEASE USE COMMON SENSE AND GOOD JUDGMENT Please contact us if you have any questions on the proper selection function or safe use of this product www Aquaglide net Aqua ie NM n P L AT IN OSACLEIECE TV ma Re B es ENS T ad AQUAGLIDE INC WHITE SALMON WA U S A STANDARDS EN 15649 2012 W A S 0 083bar PRODUCT INVERSIBLE 1 2psi MADE IN P R C DESIGNED IN U S A No protection against drowning Keine Schutz gegen Ertrinken Pas de protection contre la noayada No protege contra el ahogamiento Nessuna protezione contro l affogamento Beschermt niet tegen verdrinken Only for swimmers Nur fur schwimmer Seulement pour les nageurs Solo para nadadores Solo per i nuotatori Alleen voor zwemmers Aquaglide Inc L 396 cm 158 1 North Shore Dr SE W 366 cm 158 us Salmon WA 98672 H 55cm 21 USA Compliant with DIN EN 15649 2012 ord Prolonged exposure to salt water can damage and or shorten the expected lifetime of this product The marine environment includes many da ing elements includi corrosion abrasi R ion and dama arine life such as barnacles ar cleaning g with fresh water can reduce these risks A
18. y 5 Store the product out of direct sunlight and protected from the environment in a clean dry location It is best to store inside a container with moth balls to prevent damage from rodents NEVER store uncovered in a damp location or on aconcrete surface NEVER store at temperatures below 40 degrees F www Aquaglide net Aqua iii PLAT p gt v WORK SPACE AND TOOLS 1 Take care to position yourself in a clean dry area with R ventila tion For proper curing of adhesives temperature should remain above 10 C 50 F In most cases you will need enough room to inflate the product 2 Repair Kit Contents PVC Patch material PVC Glue Instructions 3 Additional items that MAY be needed Air pump Sharp scissors and or razor knife Dish washing liquid water small bowl or sway bottle 120 Grit sandpaper solvent such as MEK Methyl Ethy Ketone or Rubbing alcohol china marker small chip brush or disposable paint brush LOCATE LEAKIS 1 i there is a problem with air leaks you will need to locate the leak s irst 2 Inflate eki uaglide Platinum product fully Some small leaks can close themselves at lower air pressures so it is best to maintain full pressure by re inflating periodically while checking for leaks 3 Use a soapy water solution 50 50 dish soap amp water and a cloth to check for leaks Work slowly around the product Spraying or swabbing on soapy water solution Look for growing bubbl
Download Pdf Manuals
Related Search