Home

Apps

1. Supported iPod models and firmware version requirements Model O Firmware OS Version Model O Firmware OS Version 1G nano 1 3 1 160 GB classic iPod 5G 1 3 5G nano 2G nano 1 1 3 3G touch iPod classic 1 1 2 iPhone 4 3G nano 11 3 iPhone 4S iPod touch iOS 3 1 3 4G touch iPhone iOS 3 1 3 6G nano iPhone 3G iOS 4 2 1 4G nano 1 0 4 120 GB classic 2 0 1 2G touch iOS 4 2 1 iPhone 3GS iOS 5 10 Attention installer Please read the following DICE strongly recommends that the unit be installed in an easily accessible place DO NOT PLACE IT BEHIND THE RADIO AND DO NOT HIDE UNDER CARPET Whether the unit is professionally or self installed put the module where you the end user can get to it easily in the future Have the installer show you where the interface module is installed Installing the module behind the radio will make it difficult to Add possible future upgrades changing software adding new features improving operation Access the AUX input on the module to attach any audio device Access the DIP switches located on the module Remove the unit in case of failure MAKE SURE THAT THE MODULE IS IN AN ACCESSIBLE PLACE Connection diagram Auxiliary device Silverline DUO module SIRIUS SAT radio not included front BMW Interface not included Cable SIRIUS connector AUX connector IR receiver optional optional 11
2. pDICE e ee ELECTRONICS SIUVSRUAUVS OOO Apps iPhone iPod Satellite Radio AUX for selected BMW Mini Cooper vehicles Made for Installation Guide User manual iPod HiPhone Copyrights and Trademarks Copyright 2012 DICE Electronics LLC The DICE Electronics logo is trademarks of DICE Electronics LLC iPod and iPhone are trademarks of Apple Inc All Trademarks and Logos are the property of their respective owners All rights reserved Printed in the U S A Table of Contents Warning And Safety tesc2cscecaecezsdeesecs se Seichecteistecececesteaesteded 4 Product registration ccccecceeeceeeeeeeeeeeeneeeeeeeeneeeeeeeeaees 5 Silverline DUO Kit CONTERIS isesi ienei sessin 6 DIP switch overview DIP switch settings for BMW Mini Supported iPod models cscessceeeeeeseeeteeeeteeeteneeeeee 9 INote to Installe wiiccescs eek deeded eis Connection diagram Connection diagram for DSP option Factory CD changer cable locations eceeeeee 13 UTES F110 m sese neon Se 14 iPod content browsing Charging iPod locked unlocked settings and features 18 BASIC OPERATION tes sccveivss fi ceeeedetedeeyeeceleealeectiliah idveeensit 19 Controlling the DUO from select radios eeee 20 Controlling the DUO iPod Source ceceeeeetteeeteeeeeees 23 Controlling the DUO SIRIUS source eceeeeeeteeeteeeeeees 24
3. in the trunk to allow iPod SIRIUS AUX cables to be connected The module firmware may need to be updated periodically and must be removed from the vehicle and connected to a computer to apply the update 1 Disconnect both battery terminals These cables must be disconnected during installation to ensure proper initialization of the module when it is connected This step is REQUIRED for proper operation of the module 2 Access the CD changer cable The location of this cable varies by BMW model for connector locations see page 13 3 Ifthe vehicle you are performing the installation on has DSP refer to page 12 and then proceed to step 5 Locate both the 3 pin amp 6 pin connectors If the vehicle has a factory CD changer installed the 3 pin amp 6 pin cables will be connected to it and will need to be disconnected If there is not a CD changer installed the cables will be bundled and may be tucked away behind carpeting Some vehicles will have the CD changer wiring in a protective sheath which may make it more difficult to locate Non US models may not be pre wired for a CD changer and require an additional harness from BMW to be connected 15 4 Connect both 3 pin and 6 pin cables to the BMW Interface Harness ATTENTION There are two 3 pin connectors presented in the vehicle During installation make sure that the 3 pin connector from the vehicle DOES NOT have a brown wire in the middle The 3 pin connector of the phone pre wiring lo
4. selected in Album Mode ALL ARTIST and E ALL ALBUM designate all available content in those categories Song Charging The interface automatically charges the battery of the iPod when Charging may be shown by an connected and your vehicle ignition key is in the ACC ON position icon that appears on the upper right corner of the iPod screen May vary by model 18 iPod locked unlocked settings and features iPod hold ON iPod hold OFF Limited Radio control iPod control J Before connecting the iPod to the module Before connecting the iPod to the turn the hold switch ON to fully control and module turn the hold switch OFF to fully browse the songs from the wireless remote control and browse the songs from iPod The iPod is locked in this state Browsing capabilities are limited from the wireless remote Note Setting the iPod s hold switch must be done prior to connecting it to the dock cable iPod nano 6th generation will always be in locked mode since it does not have a lock switch lide t lock For iPod touch and iPhone when the screen is not active as shown on the left the SICK tO UMOE iPod iPhone is locked Press the power button to lock the iPhone iPod Touch 19 Basic operation Accessing the DUO as the audio source Much like the radio s AM FM tuner satellite radio or CD audio sources the Silverline DUO is integrated to be part of the vehicle s audio system To access the DUO sour
5. settings the change the Maximum Bitrate Filter and set it to 64K Other settings such as Buffer time and Reliability filter may also help in getting a more stable connection 29 Auxiliary audio source only with optional AUX connector The DUO AUX cable ACC 106 AUX can be used to connect an auxiliary device such as an MP3 player DVD player or other audio source y 8 k Ej Sleeve Ground Tip Left audio 1 8 mini stereo jack on K 10 gt mini DIN connector SIRIUS receptacle The auxiliary audio source can be accessed in both CDC and SAT emulation modes To access AUX audio source Plug the mini DIN connector of the AUX adapter cable into the SIRIUS receptacle and connect the 1 8 mini stereo jack to the sound output of your audio device Enter AUX mode see pg 19 All music playback is controlled through your audio device 30 Optional Remote Kit Functions for iPod App iPod Shuffle SONG within a PLAYLIST Shuffle ALBUM Shuffle off iPod Repeat one Repeat all Repeat off iPod Next Track App Next station song App dependant iPod Previous Track App Prev station song App dependant iPod Skip to the next PLAYLIST iPod Skip to the previous PLAYLIST DICE Toggle the audio sources between iPod and SIRIUS AUX Play Pause iPod Skip to the next ALBUM iPod S
6. M F SC MODE amje DISC modes and to recall and store SIRIUS stations DUO SIRIUS source mode Press RND followed by DISC 1 6 to store a preset while in Press the TRACK buttons to go to the next previous song playlist artist or album de pending on which DISC number is selected Press and hold the TRACK buttons to RW or FFW On some older BMW radios the m button must be engaged to perform the same action Sirius mode Use DISC buttons 1 6 to change between DISC modes and to recall SIRIUS stations Press and hold to store SIRIUS stations DUO SIRIUS source mode Press the MODE button o access the DUO as the audio source Illustration showing BMW 16 9 Navigation radio Song title Selected iPod mode Song Current source Playlist Artist iPod Sirius etc Artist AUX Various Ar This Song 01 02 2008 21 Press the TRACK buttons to go to the next previous song playl ist artist or album depending on which DISC number is selected Press and hold the TRACK buttons to RW or FFW Turn the jog dial to change tracks Note that a 5 second timeout is engaged once any of the alternate display buttons are pressed If exiting from any of these sub screens without waiting for the normal timeout you must wait 5 seconds before being able to use the jog dial again to naviga
7. Silverline DUO module iPod iPhone back not included I Update port USB to PC iPod dock cable Do not connect the iPod dock cable under any circumstance to the SIRIUS module connector Improper connection can cause permanent damage to iPod SIRIUS module 12 Connection diagram for DSP option BMW vehicles with Digital Signal Processing DSP must use the DSP Kit PN ACC BMW DSP To confirm if the vehicle has DSP check for a bare metal coax cable and a 3 pin connector for connector locations see page 13 DSP was only an option on some BMW 5 Series 7 Series X5 Z4 and X3 vehicles connect to module connect to car 3 pin connector g _oeee BMW Interface Harness 12ft connect to 12V switched power DSP Converter connect to car coax connector e and ground Power Cable RCA 6 PIN DSP Harness E Factory pre wired CD changer cable locations DSP Amp X 3 pin 6 pin or coax connector location Mini 3 Series and Z3 5 Series 7 Series and X5 Z4 13 X3 14 Installation Note Installation should only be performed by a qualified professional Beware of sharp edges to avoid injury and exercise caution when removing trim pieces as they may break The module should be placed in an accessible location such as the glove box consoles under the front seats or in some cases
8. The Internet Radio App Data connection requirements Controlling the Internet Radio App Text display from the Internet Radio App cceeeee 27 Terminating the Internet Radio App cccecceereeeeeeeees 28 Auxiliary audio source Optional Remote Kit iPod App Optional Remote Kit SIRIUS eee n Troubleshooting Firmware update Disclaimer Wan AMV e eeano nanie edade ee sleds te eies 4 Warning and safety Please read these instructions carefully before proceeding Failure to follow instructions may result in improper operation or injury Neither DICE Electronics nor Apple Inc its regional offices distributors or resellers take any responsibility for any damage or injury as a result of using the integration kit Do not open disassemble or alter the interface in any way Only operate unit when stationary or ask passengers to operate it for you Do not allow the Apple iPod iPhone to distract you from driving Ba Exercise good judgement and keep your eyes on the road at all times Do not expose unit to extreme temperatures humidity or shock Keep the unit and iPod iPhone away from fluids Keep away from children Interface components may contain small parts can be broken or disassembled and components may become loose from vibration and heat Small components and packaging materials may be a choking hazard when handled by children Do not insert anything into the c
9. across the radio s screen is associated with the stream shown on the radio and displays current song or station information Stream must be playing before information on the display is updated 28 Terminate kill the App If you need to terminate kill the app please follow the steps below 1 Double tap on the home button of the iPhone to bring up the list of running apps If you don t see the app s icon right away swipe the screen left or right to locate it Note If you do not see such task bar but rather a music control popup then you have an iOS device that does not support background run of apps therefore this section is not applicable to you 2 Press and hold the icon of the app until a red minus icon shows 3 Tap the red minus icon shown on top of the app 4 This will close the app 5 In a few seconds the iPod music playback app should reinitialize itself and become active again This can be verified by going back to the list of running apps and swiping the screen unit the music control section is shown The iPod app icon next to the music control sections shows that iPod is your audio source Internet Radio App Settings Many radio stations offer lower bitrates Selecting streams with a lower bitrate will reduce data usage and may reduce stream interruptions during the drive For example with the Livio Car Internet Radio app to adjust bitrates manually users can Go to the Setting menu of the device select the Livio Radio
10. asing Do not cut or try to alter cables in any way and always use the correct connections Congratulations on your purchase Thank you for purchasing this integration kit Please review this booklet before operating the unit This interface was designed and manufactured to seamlessly integrate with your vehicle s factory audio system Product registration We recommend registering your DICE product so you can receive news about important firmware updates and have unlimited access to our online support system To register your DICE product please complete the following steps 1 Visit http www register diceelectronics com 2 Look up and save the serial number of the product 3 Complete the product registration form 4 Submit the form 5 Save the registration support warranty sheet in a safe place for future reference If you are unable to complete the registration via internet please call DICE Electronics at 1 888 342 3999 Prior to installation make sure the module s firmware is up to date to ensure compatibility with the latest features and enhancements Please refer to page 35 to update firmware 6 Silverline DUO kit contents Silverline DUO module user manual BMW Interface cable Harness Optional accessories sold separately AUX connector IR Receiver amp DSP kit Remote controller Cradle ACC BMW DSP DCR 50 PTH For more accessories visit www diceelectronics com DIP switch
11. ce press the MODE or CD button on the radio Pressing this button repeatedly will cycle through sources present in the vehicle CD gt DUO DUO source selection The DUO adds additional audio sources including iPod SIRIUS Satellite Radio and auxiliary audio input To cycle between these sources use the next previous TRACK buttons within the first 5 seconds of accessing the DUO as the audio source These sources require additional parts accessories service from DICE and or third parties Silverline DUO Interface settings within first 5 seconds of accessing the DUO as the audio source Select DISC 1 to apply settings and resume audio playback Select DISC 3 to change default volume level use track up down to adjust between Min and Max Select DISC 4 to enable disable scrolling text Select DISC 5 to choose between single line display and multiline display modes multiline display mode only available on 16 9 Navigation radio Select DISC 6 to view Silverline DUO serial number and firmware version DISC 2 has no settings available 20 Operating the DUO from select BMW and Mini radios Illustration showing BMW Business CD Radio cpc 1 Song Artist Album ae o s 1 2 4 f5 6 I Selected source indicator AM FM CD CDC Use RANDOM to turn shuffle songs ON OFF Use DISC buttons 1 6 to change between Press the MODE button to access the DUO as the audio source A
12. cted Make sure all EQ and BASS boost options are turned off on your iPod Adjustments to the gain setting may be required refer to page 19 No audio from iPod source Reset the iPod Verify proper connection to iPod interface Check for compatibility Older iPod models don t support USB audio 33 Problem Solution Ensure the cable connecting SIRIUS tuner is securely connected to the Sirius tuner can t be selected correct receptacle Why does the radio display show EMPTY STOP and no music plays The iPod has reached the end of a playlist Please select a new Playlist Verify that the correct button is used to access the interface MODE CD Cannot select the interface Make sure DIP switch settings are correctly set for text display refer to page 8 for DIP switch settings Reset iPod and make sure the most recent iPod firmware is installed Check vehicle user manual on how steering wheel controls work long presses may toggle alternate function Radio steering wheel controls do not operate iPod Why does category read Playback of content selected on the iPod before it is connected to the PRESELCTD interface continues until new content is selected 34 Problem Solution Why does the message iPod UNLOCKED display on screen When the Silverline DUO is playing iPod music in UNLOCKED mode browsing mode information isn t available so the iPod UNLOCKED n
13. es overview The configuration switches located on the Silverline DUO module are used to set various operation modes of the interface Incorrect DIP switch settings may cause the interface to not work properly or to not operate at all Disconnect the vehicle harness from the module and set the ignition to the off position for 60 seconds after changing the switches then reconnect the module Silverline DUO module 1 2 ON OFF Switch Positions 8 DIP switch settings for BMW Mini The following DIP switch settings are used to configure the Silverline DUO module to interface with the various vehicle radios Before installation set the DIP switch to the position shown for the corresponding radios Car configuration switches BMW BMW amp MINI 16 9 Navigation Radio Business CD Radio HOFF OFF BMW 4x3 Navigation Radio BMW MID Radio HE OFF HON HON MON HOFF HON For single line Non Navigation radios in Mini 3 Series Z3 Z4 and X3 models For 16 9 wide screen Navigation radio system in BMW and Mini For 4 3 small screen Navigation radio system in BMW For single line Non Navigation radios in 5 Series 7 Series and X5 models Radio specific text field configuration should be performed during installation Please refer to interface setting DISC 5 section on page 19
14. f the application will be shown Please note that although iOS 4 4 2 1 is supported on iPhone 3G and iTouch 2nd generation applications do not run in the background As such loading the app takes longer than on devices where the app is present in the background m AT amp T gt V 2 1 33 10X FM Dance 128kbs MP The Project Buffer ing a i in 3 27 If your listening experience is interrupted by a call under most conditions the app will resume playback at the end of the call Music playback apps running on your iPhone are sent to background automatically when the home button of the phone is pressed but the music playback itself is not stopped To resume playback of your iPod music library stop Livio playback by tapping on the screen below the Livio Radio logo An icon representing stop will show on the main Livio screen Press the home button to send the application to the background Other apps may need to be terminated manually Please see next page A few seconds after this the iPod music playback application will reinitialize itself and become active again if the iPod was locked when it was connected to the kit This is indicated by an Accessory Connected message being shown when the iPod icon is tapped If the iPod was in unlocked state when it was connected to the kit press the play button on the iPod application Text display from the Internet Radio App Text that scrolls
15. ion 4905 OK Module updated successfully 36 Disclaimer Important disclaimer please read Unauthorized reproduction or reverse engineering is strictly prohibited Intellectual property included is distributed under specific license agreement with respective owners and is licensed only not sold No warranty explicit or implied is stated Neither DICE Electronics LLC nor any of its agents distributors dealers or vendors shall be liable for damages IN NO EVENT SHALL DICE ELECTRONICS LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT ITS ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION 37 Support and Warranty If you experience any problems or need help please contact you local dealer or call DICE Electronics LLC At 888 342 3999 or visit us at http diceelectronics com product support Products carry a 1 year limited warranty that protects you from defects in material and workmanship of products sold by DICE Electronics or its authorized agents distributors and dealers The warranty period begins the day a product is purchased by the end user Products found to be defective during the warranty period will either be repaired or replaced by DICE Electronics at no charge unless warranty is void Unauthorized attempt of repair or alteration of the product in any way immediately voids this warranty Warranty does not exte
16. kip to the previous ALBUM Next Previous ARTIST function is currently not supported Optional Remote Kit Functions for SIRIUS Next Category Previous Category Next Channel Previous Channel Note To display SIRIUS ID go to channel 000 E Toggle the audio sources between iPod and SIRIUS AUX Recall preset SIRIUS channel Save the current SIRIUS channel in EV the corresponding preset Note Saving presets with the remote will be different from the presets saved by the radio 31 32 Troubleshooting Problem Solution Radio NAV display only shows DISC and track number and there is no iPod control Make sure DIP switch settings are correctly set for text display refer to page 8 for DIP switch settings No text display on radio Make sure DIP switch settings are correctly set for text display refer to page 8 for DIP switch settings Please also select proper display mode refer to page 19 DISC 5 Correct DIP switch settings but still no text display Make sure the module is reconnected with the vehicle off when changing any dip switches Verify that the vehicle s radio is capable of displaying CD text Some early model year radios don t support text display Radio steering wheel controls do not operate iPod Reset iPod and make sure most recent iPod firmware is installed Music is distorted or sound level is too low with iPod conne
17. ll vary by app To learn more about each app specifically please visit the website for the app you need information about Data Connection Requirements 3G 4G WiFi Users must have an active wireless data connection in order to stream music from an app while in the car Data connections including 3G or 4G through wireless carriers or a third party wireless Internet access point connected to your mobile device through WiFi will work Because this app requires a data connection it will only work on connected devices such as the iPhone and iPod touch 26 Controlling Internet Radio Apps NOTE The following features may not be supported by all apps For demonstration purposes the following examples will show the features for the Livio Car Internet Radio app The app must be active on the screen of the device To do so simply tap the app s icon and it will load Next previous TRACK buttons execute application specific features such as skipping stream or cycling between station presets DISC PRESET 1 6 buttons are associated with station presets when used with the Livio Car Internet Radio application iPhone operating system iOS5 enabled application developers to share the now playing screen information For example when using the Pandora App you will see artist album and song information on the radio s screen When using an application that doesn t implement this feature or running iOS4 only the name o
18. nd to cosmetics or finish A DICE product specialist must determine that a defect is present in the product and issue an RMA Be sure that all wiring is connected as described in the user manual and all related equipment is functioning properly DICE Electronics disclaims any liability for other incurred damages resulting from product defects Any expenses in the removal and reinstallation of products are not covered by this warranty PLEASE NOTE International customers requiring a product replacement please contact the dealer your product was purchased from 38 Installation notes Installed by Installed date Other notes Illustration 000 39 pPOICE ELECTRONICS BMW Mini Cooper compatible integration for iPod iPhone Internet Apps SIRIUS and AUX www diceelectronics com DICE DUO BMW 0312
19. oks identical to the 3 pin connector of the CD changer pre wiring Locate and use the correct 3 pin cable with the brown wire on the outside Incorrect connection will result in permanent damage to the unit and will not be covered by warranty 3 pin and 6 pin BMW cables 16 Route the interface cable to the front of the vehicle Fold down rear seats if applicable and route the extension cable through the rear seat bottom cushion Route the remainder of the interface cable ie under the door sill or under the driver s seat to a location where the module can be easily accessed in the future Make sure you have set the DIP switches on the DUO as specified on page 8 Connect the BMW interface cable iPod Dock Cable and SIRIUS Connections if applicable to the DUO module and double check all connections See page 11 and page 12 if the vehicle has DSP for the connection diagram Test the installation Replace any trim carpeting or panels that were removed during installation 17 iPod content browsing A la By default the interface creates a Playlist having a name that is the same 8 a as the name of the iPod This Playlist is the very first on the list of Playlists 2 pj shown while browsing in Playlist mode This Playlist contains all the songs 3 8 on the iPod Once a Playlist is selected an Artist may be selected within p 8 that Playlist using the Artist Mode Albums by the selected Artist within a z the selected Playlist may be
20. os Tune to desired station Press and hold the desired DISC button preset 1 6 to save as preset Mini navigation radio Tune to desired station Press jog DIAL press desired DISC button 1 6 press DIAL to save To recall a memorized channel Simply press the desired DISC preset 1 6 Non Navigation radios RND DISC 1 6 store current station to PRESET 1 6 When done press RND again to deselect then To store stations to buttons 1 6 ali Navigation radios DISC 1 6 DISC 1 6 recall PRESET 1 6 stations store current station to PRESET 1 6 Common Control Mini Navigation radios O D _ 6 D O Press DIAL Press DISC button 1 6 within Press DIAL to store station 5 seconds or O change channel NOTES If a SIRIUS CONNECT compatible tuner is not detected then a No Tuner vehicle message is displayed Go to Channel 000 to view the SIRIUS Tuner ID for activation The 12 digit SID display format is shown in two parts as SID 123456 followed by 789ABC 25 Internet Radio Application Support iPhone iPod touch This kit includes support for internet radio streaming apps available on mna 14 49 3 snm the iTunes Store Thousands of stations can be streamed through data connections Supported apps include Livio Car Internet Radio Pandora iHeart Radio and more Supported features such as text display on screen and next previous track functions wi
21. otification is shown To view information associated with browsing modes ensure the iPod s hold button is set before connecting it to Silverline DUO The radio displays track 99 TR 99 Track up down controls do not work Track 99 indicates that the Silverline DUO is in auxiliary audio AUX mode See page 19 on how to enter exit this mode Updating Firmware Mac OS illustrated DICE Firmware Updater v3 0 0 Connect a device Connect module via mini USB Product must be registered before it can be updated Please register your product at hto reaister diceeiectronics com Use the following serial number when registering 900012345678 C o Product registration notification The above screen shots are for illustration purposes only ana E DCE Firmware Updater v3 0 0 Silverline DUO Dice Becsronies Mode uo Am ra aap 201 Carimertace ouo Firmware Version 2496 Serial Number X t12345678 Bootloader Version 1 01 Update From inernet Device specifications and update selection Verifying Device s Program Memory Firmware update progress 35 cans Agreement Pease read he owing License Agreement You must accept the erm of ths agreement ier conning wah vrate End User ante Agreement You sow cay y arao Te routowane ono vsta UCI ARLEN WORE exanr YOU DO NOT ACA VO TE TAM OF Te MALI ASE License Agreement click Agree to proceed Your module is now up to date Device updated to vers
22. s 1 5 23 Controlling the DUO iPod source The Silverline DUO integration kit features content browsing After connecting the iPod select the desired browsing mode by selecting the appropriate DISC Press the SEEK button or turn the TUNE dial repeatedly to browse contents 1 second after releasing the button your selection is executed The browsing function below is illustrated in the Track field sonemove DISC1 song namel song name PLAYLIST MODE DISC 2 PLAYLIST1 PLAYLI ST6 ARTIST MODE DISC 3 gt artistl artist3 within the selected Playlist ALBUM MODE DISC 4 al buml al bum7 within the selected Artist in the selected Playlist PODCASTMODE DISC 5 gt podcastl podcast 9 AUDIOBOOK MODE DISC 6 audi obookl audi obook4 Only available when iPod is locked When iPod is unlocked the radio will only display song titles 24 Controlling the DUO SIRIUS source The Silverline DUO integration kit features SIRIUS connectivity Use the TRACK buttons or jog DIAL to browse between subscribed channels To store a subscribed channel to memory Single line radio Tune to desired station Press RANDOM button and select which DISC button preset 1 6 to save to Press RANDOM button once more to store the station Navigation radi
23. te through content 22 You must have the correct display mode selected for proper operation see page 19 DISC 5 Song Artist Playlist displayed here Press the MODE button to access the DUO as the audio source Press the TRACK buttons to go to the next previous song playl ist artist or album depending on which DISC number is selected Press and hold the TRACK buttons to RW or FFW On some older BMW radios the m button must be en gaged to perform the same action Illustration showing Mini Navigation radio Unlocked iPod Unlock 33 48 19 North 118 10 25 West Altitude 280 ft Turn DIAL for next previous track Press DIAL to store SIRIUS sta tion presets DUO SIRIUS source mode see page 24 On Mini navigation radios the RND button is used to toggle be tween Menu and Text modes Text Mode RND enabled Dis plays text from the DUO such as Song Artist Playlist titles Menu Mode RND disabled Displays the default navigation and vehicle menu screens coc 1 TROT D 1 Use DISC buttons 1 6 to change between DISC modes and to recall and store SIRIUS stations DUO SIRIUS source mode Selected source indica tor AM FM CD CDC Used to store stations to Preset

Apps

Contents

Download Pdf Manuals

Related Search

Related Contents