Recliner - Medicaleshop.com
Contents
1. safe working condition Periodic inspection adjustment and replacement of worn parts will provide many years of superb performance When you believe that a component or part of your Advantage Recliner is not functioning properly contact your Graham Field authorized distributor immediately as a potentially hazardous condition could result Only excellent condition is acceptable where safety is concerned Service manual There is no service manual for the Advantage Recliner Please contact your Graham Field authorized distributor with service questions not answered by this manual Info We recommend that you have a Graham Field authorized distributor perform a six month maintenance check as the distributor may find and correct a problem which might otherwise go undetected and eventually cause more serious problems and or personal injury 22 3K01 INS LAB RevB13 Advantage Recliner User Manual Do it yourself maintenance You can do many of the scheduled maintenance tasks yourself if you have mechanical ability and a few basic tools Refer to the maintenance schedule below for the recommended regularity of each procedure If any maintenance procedure is not clear to you ask your Graham Field authorized distributor for assistance A NOTICE Improper maintenance can cause operating problems and may affect your warranty Z WARNING Unauthorized modification or the use of non Everest amp Jennings replacement parts could change the2. Advantage Recliner has the responsibility of making certain that the user can safely operate the wheelchair with the adjustments selected This person must evaluate the user s ability weight physical condition the environment in which the wheelchair will be used and the terrain over which the wheelchair will travel We recommend the use of anti tippers at all times Z WARNING Anti tippers must be installed in the downward position Please note the following special statements used throughout this manual and their significance Z WARNING Indicates a potential hazard situation or unsafe practice that if not avoided could result in death or serious personal injury N CAUTION Indicates a potential hazard situation or unsafe practice that if not avoided could result in minor or moderate personal injury A NOTICE Indicates a potential hazard situation or unsafe practice that if not avoided could result in product or property damage Info Provides application recommendations or other useful information to ensure that you get the most from your product 4 3K01 INS LAB RevB13 Advantage Recliner User Manual 2 IMPORTANT SAFETY PRECAUTIONS IMPORTANT SAFETY PRECAUTIONS ALWAYS FOLLOW THESE SAFETY PRECAUTIONS WHEN USING YOUR WHEELCHAIR FAILURE TO DO SO COULD RESULT IN PERSONAL INJURY TO YOU OR OTHERS OR DAMAGE TO YOUR WHEELCHAIR Safety requires the constant attention of the wheelchair user and the attendant It is e
3. locations are referenced in the index at the end of this manual Specific tools needed to perform each adjustment are identified in adjustment directions A complete list of tools needed to perform all adjustments in this section follows Hex wrench furnished with wheelchair M13 wrench M10 wrench hex key 14 3K01 INS LAB RevB13 Advantage Recliner User Manual REAR WHEELS amp CASTERS We recommend that you do not replace or adjust rear wheel or caster components yourself since special tools and training are required Please contact your Graham Field authorized distributor when your rear wheels or casters need adjustment or if you wish to change seat height 3K01 INS LAB RevB13 Advantage Recliner User Manual 15 ARMS Info Fixed arms are not removable Only detachable Advantage Recliner arms as shown below are removable Remove arm 1 Depress arm release right arm pin until it unlocks 2 Hold arm by center of armpad Lift straight up and off Install arm release pin Hold arm by center of armpad Lower arm straight down into sockets and push to lock Ensure that release pin is locked in place front arm socket remove arm Z WARNING Ensure arm release is locked in place before occupying or operating wheelchair 16 3K01 INS LAB RevB13 Advantage Recliner User Manual FRONT RIGGING ELEVATING LEGREST DETACHABLE SWINGAWAY Z WARNING The footplates lowest point should be no closer
4. structure of the wheelchair void the warranty and create a hazardous condition resulting in serious personal injury MAINTENANCE SCHEDULE Procedure Perform at least every 3 Months 6 Months Check tire wear Check handrims Check wheel lock engagement Check anti tippers optional Wipe off frame with soft cloth Check handgrips Check upholstery Check rear wheel adjustment Check arms Check backposts push handles Check footrests elevating legrests Clean frame Check caster stem rotation GF distributor maintenance check Check rear wheel bearings distributor Check caster bearings distributor 3K01 INS LAB RevB13 Advantage Recliner User Manual 23 List of tools The tools and cleaning supplies listed will assist in the procedures outlined in Section 6 30 weight oil available at most auto parts stores Phillips screwdriver soft cloth mild soap and water solution General care Always evaluate the overall operation of your wheelchair It should function with ease and should travel straight without excessive drag or pull to one side Remember your Graham Field authorized distributor knows your wheelchair best when it comes to service and repairs Contact your distributor with any questions or concerns regarding the safe operation and maintenance of your wheelchair Regular maintenance is essential for your safety and continued operation of your whee
5. wish to reach 2 Rotate both casters fully forward go forward and then back the wheelchair toward the object to swing the casters fully forward Engage both wheel locks Ensure the casters are rotated fully forward before reaching If not repeat step 2 Backward N WARNING Do not engage the wheel locks while reaching or bending backward Should your weight suddenly shift accidentally it is better to roll in that direction than to tip over N WARNING Do not lean over the back upholstery this could cause the wheelchair to tip 1 Maneuver the wheelchair as close as possible to the object the rear wheels will limit how close you can get 2 Rotate both casters fully forward go forward and then back the wheelchair toward the object to swing the casters fully forward 3 Reachonly as far as your arm will extend without changing your sitting position If in doubt reposition the wheelchair or ask for assistance 3K01 INS LAB RevB13 Advantage Recliner User Manual 11 RAMPS AND INCLINES Z WARNING During descent the footplates lowest point should be no closer to the ground than 2 1 2 inches to permit proper clearance Z WARNING Do not attempt inclines without anti tippers installed in the downward position Do not attempt any incline or decline of more than 6 degrees 10 grade or one foot of rise or fall per ten feet of ramp length Z WARNING Do not use wheel locks to slow your descent Attempting to use w
6. NG To reduce the risk of tipping before leaning or reaching forward sit back in the seat and rotate casters fully toward front of wheelchair Z WARNING Unauthorized modification or the use of non Everest amp Jennings replacement parts could change the structure of the wheelchair void the warranty and create a hazardous condition resulting in serious personal injury 6 3K01 INS LAB RevB13 Advantage Recliner User Manual Z WARNING Do not lean on this wheelchair or use it as walker these are practices which could result in loss of balance and personal injury Z WARNING Do not use your wheelchair on escalators Z WARNING Wheel locks are not brakes Do not use the wheel locks to slow down your wheelchair or while the wheelchair is moving Wheel locks are only intended to keep the wheelchair in place when it is at a complete stop Z WARNING Notice for California Customers California Proposition 65 WARNING This product contains a chemical known to the State of California to cause cancer and reproductive or developmental harm Z WARNING GF Health Products Inc specifically disclaims responsibility for any personal injury or property damage which may occur during any use which does not comply with federal state or local laws or ordinances 3K01 INS LAB RevB13 Advantage Recliner User Manual 7 3 GETTING STARTED Please familiarize yourself with main components identified in Advantage Recliner illustration b
7. User Manual 5 3 es lt Everest amp Jennings INTRODUGTI0N Q 3 IMPORTANT SAFETY PRECAUTI0INS 5 GETTING STARTED U U 8 HANDLING TIPS I I S 10 ADJUSTMENT Sossisisccccccccsatcnscinccccccicccccsdacadasutacadicadaeatacadsccsesaiae 14 MAINTENANCE 22 TROUBLESHOO0TING 28 LIMITED WARRANIY 29 q 31 3K01 INS LAB RevB13 Advantage Recliner User Manual READ THIS MANUAL BEFORE OPERATING YOUR WHEELCHAIR 1 INTRODUCTION Important safety operating and maintenance instructions that warrant your attention are included in this user manual Read the entire manual carefully before operating your new wheelchair and refer to it as often as necessary to help maintain good performance standards Consult your healthcare professional and GF Health Products Inc Graham Field authorized distributor for assistance in developing and learning safe and effective techniques for performing your daily activities according to your individual physical abilities and needs and to make certain that your wheelchair is properly prescribed and adjusted for your use The safety precautions in this manual are general warnings intended to be used o
8. ee distributor to correct adjustment lt 5 45 o o serveesiet sluggish turning 9 z c
9. elow headrest back Ae arm 48 amp trigger release lt backpost Nearest NN A I mech lock seat upholstery legrest leg pad f rear wheel footrest frame caster socket wheel lock caster fork caster wheel crossbrace Advantage Recliner 8 3K01 INS LAB RevB13 Advantage Recliner User Manual OPERATION OF RECLINER LOWERING AND RAISING RECLINING BACK Z WARNING If you are lowering or raising the reclining back while the user is seated in the Advantage Recliner take care not to let the back drop This could cause serious personal injury Z WARNING Do not operate wheelchair unless seat back is in a fully upright position Z WARNING Ensure reclining back is locked in place before occupying or operating wheelchair removable headrest ps w upper end of backpost handgrip trigger release lowering and raising reclining back Lowering Reclining Back Pull the trigger releases located below the push handles on both sides simultaneously and recline the back to desired incremental position Lock into place by releasing trigger releases Raising Reclining Back Pull the trigger releases located below the push handles on both sides simultaneously and recline the back to desired incremental position Lock into place by releasing trigger releases REMOVABLE HEADREST Installation of Removable Headrest To install the rem
10. est to lower without dropping suddenly support its weight and move the release lever forward 2 Slowly lower elevating legrest to desired position 3 Release lever Ensure elevating legrest is locked in position before letting go of legrest adjust legrest Adjust elevating legrest panel position The legrest panel can be rotated up and out of the way Refer to picture above 1 To adjust panel hold the panel and rotate it upward 2 Toreturn panel to position hold the panel and rotate downward The panel will stop at the proper position N WARNING Ensure legrest panels are locked in place before occupying or operating wheelchair 18 3K01 INS LAB RevB13 Advantage Recliner User Manual Adjust legrest footplate extension length 1 See picture at right Loosen latch to free footplate extension inside legrest hanger 2 Press down on the locking button and adjust the footplate to the desired length Ensure the locking button is completely extended and securely fastened in the adjustment hole 3 Fasten latch to secure footplate extension inside legrest hanger 4 Repeat steps 1 3 for the other footplate elevating legrest footplate extension extension adjust length 5 Ensure both footplate extensions are securely fastened and that minimum ground clearance is 2 1 2 inches N WARNING Ensure that footplates are securely fastened before occupying or operating wheelchair 3K01 INS LAB R
11. evB13 Advantage Recliner User Manual 19 CROSSBRACES Tighten crossbraces M13 wrench M5 hex key Check the crossbraces to ensure that the bolt and nut securing both crossbraces in the center of the wheelchair are secure crossbraces should be loose enough to fold easily yet snug enough to take up excess play Use an M13 wrench and M5 hex key to tighten 20 3K01 INS LAB RevB13 Advantage Recliner User Manual WHEEL LOCKS Adjust wheel locks M10 wrench Use an M10 wrench to loosen the adjustment wheel lock bolt until the wheel lock adjustment bolt slides on the frame right rear wheel right front frame Place the wheel lock in the locked position and slide it into contact with the tire wheel lock Place the wheel lock in shown unlocked the unlocked position and slide it 3 8 closer to the tire Use an M10 wrench to tighten the adjustment bolt and engage the wheel lock to check the fit The wheel lock should indent the tire at least 3 8 Repeat steps 1 4 for other wheel lock Tighten the adjustment bolts securely to eliminate wheel lock movement on frame Z WARNING Ensure that wheel locks are adjusted so that they lock in place appropriately before occupying or operating wheelchair 3K01 INS LAB RevB13 Advantage Recliner User Manual 21 6 MAINTENANCE Protect your E amp J Advantage Recliner by having it serviced regularly Proper care and maintenance are essential to keep your wheelchair in
12. heel locks is likely to result in accidental locking that could cause the wheelchair to stop abruptly suddenly pitch forward or tip sideways Z WARNING Avoid changing direction while descending a ramp or incline as this could cause instability Most people are capable of negotiating short inclines without assistance depending upon upper body strength endurance and the degree of incline Know your own capabilities and limitations in terms of strength and endurance before attempting to negotiate an incline or decline Practice with an attendant or healthcare professional first before attempting any inclines declines curbs or ramps Always inspect the ramp for hazards such as holes slippery or uneven surfaces etc before starting up or down If you can not see the entire ramp ask someone to inspect it for you Ascent Lean the upper part of your body slightly forward as you ascend the incline If it becomes necessary to stop on the incline avoid any abrupt or sudden forward movement as you resume climbing this could cause tipping Descent Always face forward when going down a ramp but do not lean forward this could cause tipping Lean slightly backward to increase stability It is critical to keep the wheelchair under control at all times Descent should be made slowly and safely by grasping the handrims however use care as friction heat will be generated We recommend the use of gloves to reduce the effects of friction hea
13. k for burrs on the screw heads and replace if found Ensure that screws do not extend into the padding Confirm that the posts at base of arm fit correctly in the sockets snug but not binding Check backposts push handles Check backposts at least once a month Ensure all mounting hardware is securely fastened and the backposts are not bent or damaged Contact your authorized distributor if you observe cracking or peeling paint or plating Check elevating legrests Check elevating legrests at least once a month Inspect the locking mechanisms to confirm sure fit Check for cracks burrs or sharp edges and replace if found Ensure that the legrest will automatically lock securely in place and will not accidentally unlock 26 3K01 INS LAB RevB13 Advantage Recliner User Manual Cleaning your Advantage Recliner Wipe off the frame frequently at least once a week using a soft cloth Dry the wheelchair immediately if exposed to moisture Clean the frame every three months with a mild soap and water solution The frame does not need to be waxed Do not use solvents abrasive waxes caustic chemicals or spray silicone Never use abrasive cleansers they could scratch the finish Never use steam or high pressure cleaners Clean upholstery and plastic components at least once a month with a mild soap and water solution Check casters Check the caster stems for proper rotation at least every three months The caster forks must swivel freely
14. lchair Check tire wear Examine tires at least once a week for surface wear and cracks and replace them as needed Replace tires when they become loose on the rims or cracks appear Check handrims Check handrims at least once a week Inspect each handrim for rough or sharp edges and if any are found replace handrims immediately Ensure that all hardware is properly aligned and secure 24 3K01 INS LAB RevB13 Advantage Recliner User Manual Check wheel lock engagement Check wheel lock engagement at least once a week See Adjust wheel locks in Section 5 to adjust wheel lock engagement If a wheel lock is worn or damaged replace it immediately Inspect the hardware for looseness or signs of wear Ensure that the locking mechanism operates smoothly The locking assembly should be tight enough so that the wheel can not rotate or the lock slip Check that the locking shoe does not press against the tire when in the unlocked position Excessive force should not be required to either engage or release wheel locks Oil the wheel lock pivot points with one or two drops of 30 weight oil Remove excess oil and dirt Check anti tippers Check the anti tippers at least once a week Ensure the anti tippers are securely fastened and properly positioned Z WARNING Anti tippers must be installed in the downward position Check handgrips Check handgrips at least once a week Ensure that they are not ripped ensure that they are tight and secu
15. nly as basic guidelines You may find it necessary to develop your own methods for safely solving frequently encountered challenges Again consult your professional medical advisors for their recommendations about safety methods and never hesitate to ask for their assistance Your wheelchair should receive frequent regularly scheduled maintenance including an inspection of the mechanical parts to ensure proper operation Some suggested inspection procedures troubleshooting procedures and adjustment procedures are included in this manual When it comes to service and repair remember that your Graham Field authorized distributor knows your wheelchair best Thank you for choosing an Everest amp Jennings product We at Graham Field wish to assure you of our continuing commitment to provide innovation and quality in our products The Advantage Recliner is a manual folding lightweight wheelchair suitable for frequent users who require a lightweight portable wheelchair fitted to their anatomy without the need of customization or alteration to the center of gravity The Advantage Recliner is intended for indoor and or outdoor use The Advantage Recliner comes with a higher back and removable full support headrest which includes an additional neck support that adjusts easily to fit every need Anti tippers and an anti fold bar are standard 3K01 INS LAB RevB13 Advantage Recliner User Manual 3 The person performing adjustments the
16. oes not offer seating or occupant restraint equivalent to the seat provided in a motor vehicle To increase your safety while traveling in a motor vehicle always transfer to the vehicle seat and use the restraint provided by the vehicle manufacturer Z WARNING Do not tie down or attach anything to the wheels This could cause tipping and possibly result in injury or damage to the wheelchair Z WARNING The footplates lowest point should clear the ground by at least 2 1 2 inches to permit proper clearance of potential obstruction Z WARNING Doing a wheelie tilting the wheelchair backward until it reaches its balance point is dangerous and could result in personal injury to the user Z WARNING Do not stand or step on the footplates while transferring to or from your wheelchair This could cause the wheelchair to tip or may cause personal injury or damage to your wheelchair Z WARNING Do not place your hands between seat rail and side panel Z WARNING Always engage wheel locks before transferring using a wheelchair lift or using an elevator Z WARNING Ensure that wheelchair is on a stable level surface and engage wheel locks before and during transfer Z WARNING Operate only with anti tippers in place when leaning or tipping When in use anti tippers must be installed in the downward position Z WARNING Do not lean over the top of the wheelchair back This could cause the wheelchair to tip over Z WARNI
17. ovable headrest insert the headrest posts into the upper ends of the backposts as shown above 3K01 INS LAB RevB13 Advantage Recliner User Manual 9 4 HANDLING TIPS The Everest amp Jennings Advantage Recliner has been designed and engineered to perform as a stable and well balanced unit when used for its intended purpose However it is possible to tip the Advantage Recliner over if it is used improperly We urge you to learn the characteristics of your wheelchair It is most important to learn safe methods to perform the daily activities basic to your lifestyle Consult your medical professionals for assistance in developing the skills and proper techniques to perform all activities safely BALANCE Proper balance is the key to maintaining the stability of your wheelchair Reaching bending and transferring to or from a wheelchair will change the weight distribution and center of gravity of you and your wheelchair When performing such activities do so as instructed in the following paragraphs to avoid tipping the wheelchair TRANSFER ACTIVITIES Z WARNING Always ensure that the wheelchair is on a stable level surface and engage wheel locks before transfer Z WARNING Do not step on the footplates this could cause the wheelchair to tip Fold them up and either detach them or swing them aside Z WARNING There is a critical moment when there is little or no seat platform beneath you Take every precaution to reduce thi
18. rely fastened Check upholstery Check upholstery at least once a month Inspect for rips tears and worn spots Ensure that all upholstery attaching screws are present properly aligned and well secured Use a Phillips screwdriver to tighten upholstery mounting screws Check attaching screws for sharp edges or stripped screws and replace if found Z WARNING Worn or torn upholstery or upholstery with loose hardware must be replaced immediately It may not support body weight 3K01 INS LAB RevB13 Advantage Recliner User Manual 25 Check rear wheel adjustment Inspect the wheels at least once a month Check alignment by elevating the rear of the wheelchair on a stable object until the rear wheels clear the ground or placing the wheelchair upside down in a stable position such that the wheels can spin freely Spin the wheels there should be no wobble or sideplay and the wheels should spin freely without binding The bearings should be clean and rotate smoothly Check rim sideplay to verify that bearings are not too loose If there is a problem contact your Graham Field authorized distributor If adjustment is required this should be done by your Graham Field authorized distributor only Check arms Check arms at least once a month Inspect for sharp edges or cracks which could weaken the arm and replace if found Ensure all attaching screws are present and tight Use a Phillips screwdriver to tighten arm pad mounting screws Chec
19. s unsupported distance before you attempt transfer Transferring into or out of a wheelchair is a very difficult maneuver Exercise extreme care when transferring without the aid of either an attendant or a patient lift Consult your physician nurse or physical therapist for assistance in developing your individual technique Make sure that the wheelchair is stabilized and will not move or slide during the transfer Take extra precaution to prevent tipping Use good body mechanics to prevent personal injury 10 3K01 INS LAB RevB13 Advantage Recliner User Manual REACHING BENDING N WARNING Always turn the casters frontward to provide stability while reaching If in doubt ask for assistance or use a device that will extend your reach without requiring you to shift your weight Although it is not recommended you may find it occasionally necessary to lean or reach from your wheelchair Consult with your healthcare professional for assistance in developing your personal safe reaching or moving techniques suited to your ability and restrictions Forward or sideward N WARNING Do not attempt to reach objects if you are required to move forward in the seat Do not attempt to retrieve objects from the floor if you must reach down between your knees Do not shift your weight in the direction that you are reaching and or bending this could cause the wheelchair to tip 1 Maneuver the wheelchair as close as possible to the object you
20. t but going slower is a better alternative 12 3K01 INS LAB RevB13 Advantage Recliner User Manual CURBS AND STEPS Curbs steps and stairways are dangerous obstacles that confront the wheelchair user When you encounter curbs find a way around or use the ramps now available in most locations If you encounter steps and there is no ramp available avoid the steps by utilizing the disabled designated elevators now required in most locations Z WARNING Never attempt to negotiate steps stairs or escalators in your Advantage Recliner 3K01 INS LAB RevB13 Advantage Recliner User Manual 5 ADJUSTMENTS The Advantage Recliner offers several adjustments to make it easier and more comfortable to drive Section 6 MAINTENANCE offers preventive maintenance suggestions for keeping your wheelchair in excellent condition ensure that all components are in excellent condition before adjusting The following are recommended methods after a few adjustments you may develop your own Always consult your Graham Field authorized distributor for assistance The person performing adjustments on the Advantage Recliner has the responsibility of making certain that the user can safely operate the wheelchair with the adjustments selected This person must evaluate the user s ability weight physical condition the environment in which the wheelchair will be used and the terrain over which the wheelchair will travel All adjustments and their page
21. to the ground than 2 1 2 inches to permit proper clearance Z WARNING Do not stand on the footplates this could cause the wheelchair to tip Remove elevating legrest L Attach elevating legrest 1 To release lock pull swingaway release lever forward toward front of wheelchair Legrest will swing outward swingaway release lever To remove lift legrest straight up off wheelchair hinge pins Set legrest on wheelchair so that legrest hinge plates engage wheelchair hinge pins Swing legrest inward remove elevating legrest Ensure legrest is locked in place and swingaway release lever is locked in a rearward position toward back of wheelchair Z WARNING Ensure legrests are locked in place before occupying or operating wheelchair 3K01 INS LAB RevB13 Advantage Recliner User Manual 17 ADJUST LEGREST ELEVATION Z CAUTION It is possible to RAISE the elevating legrest without moving the legrest release lever As a safety feature however in order to LOWER the elevating legrest you must move the legrest release lever This is to prevent the legrest from accidentally dropping while the user s leg is elevated N WARNING Ensure elevating legrests are locked in place before occupying or operating wheelchair Raise elevating legrest Slowly rotate the legrest up to the desired position Ensure elevating legrest is locked in position Lower elevating legrest 1 Toallow the elevating legr
22. to facilitate steering and handling Adjusting the stem nut varies the amount of force required to turn the caster If the stem nut is too loose the caster will flutter or shimmy if too tight the wheelchair will be difficult to steer If the caster stems require adjustment or the stem bearings require replacement contact your Graham Field authorized distributor Ensure that stems are firmly attached to forks and that forks and stems are not bent Evaluate all threads locking nuts and bearings Check wheel bearings Have your Graham Field authorized distributor check caster and rear wheel axle bearings at least every six months 3K01 INS LAB RevB13 Advantage Recliner User Manual 27 7 TROUBLESHOOTING Continual use of your Advantage Recliner necessitates maintenance especially if the factory set adjustments have been altered The following troubleshooting guide lists several common problems that may occur and offers corrective actions for each If you are unsure of the solution or unable to diagnose the problem do not hesitate to ask your Graham Field authorized distributor for assistance SYMPTOM PROBABLE CAUSE AND CORRECTIVE ACTION Nuts and or bolts may be loose If so tighten Bolts should be snug Rear wheels and or casters may be adjusted improperly Ensure that both rear wheels are mounted in identical positions and that casters are mounted in identical positions v Caster stem s may be adjusted improperly S
23. xtremely important to learn and always use safe methods of performing basic daily activities Always consult your healthcare professional to determine those methods most suitable for your individual abilities Protect yourself and your wheelchair by having your Advantage Recliner serviced regularly Whenever any part of your Advantage Recliner is not functioning properly contact your Graham Field authorized distributor immediately as a hazardous situation could result causing personal injury or damage to your wheelchair ONLY EXCELLENT CONDITION IS ACCEPTABLE WHERE SAFETY IS CONCERNED Periodic inspection adjustment and replacement of worn parts will provide many years of superb performance WARNINGS Z WARNING Advantage Recliner maximum weight capacity is 300 Ib 136 kg EVENLY DISTRIBUTED Z WARNING Do not operate this wheelchair on streets or roadways Z WARNING Do not operate this wheelchair on hilly or rough terrain sand wet or icy surfaces or surfaces with impaired traction Ensure that pathway is clear of all obstacles Z WARNING Do not turn wheelchair while going downhill as wheelchair could tip over Z WARNING Do not attempt inclines without anti tippers installed in the downward position Do not attempt any incline or decline greater than six degrees 10 grade or one foot of rise or fall per ten feet of ramp length 3K01 INS LAB RevB13 Advantage Recliner User Manual 5 Z WARNING This wheelchair d
Download Pdf Manuals
Related Search