Home

Central Management System User`s Manual

image

Contents

1. Save user name and password ent Check lt Save user name and password gt to save time from entering username and password every time the CMS starts Click lt OK gt to login The username and password accounts can be added or removed under the lt CMS User gt tab in lt Setting gt configuration window Refer to the CMS User section for more information A NOTE If the wrong username or password is entered for 3 times the message below will be shown and the CMS will automatically after lt OK gt is clicked Reopen the CMS to enter the correct username and password CMS Error 5 User s Manual Buttons Available on the Main Window After starting the CMS the main window of the CMS will be shown as the figure below The name of each button is indicated as follows 2008 09 24 09 28 43 01 New Grou lt gt Os fics Bie Eo TEZINE Capacity 20 00 GB Je Used 15 17 GB E Free 4 83 GB mi ER Sleieocke Display Modes 2X2 3X3 4X4 5X5 6X6 7X7 8X8 Sequence Full Screen A Left to Right Live Playback CMS Player Snapshot Emap E Left to Right Schedule Record Setting Health Lock a steTee S 5 Bandwidth Audio 6 HDD Info The usage and function of each button will be briefly described as follows Display Mode Click on any lt Mode gt icons to view the image in a multiple window mode The selections include 4 window 9 window 16 wi
2. AN NOTE The CMS supports the most common authentication keys Digest and Basic The authentication will be automatically detected and performed Check the box Bypass proxy for local address to disable connection via the proxy server for local LAN network The lt Advance gt button allows the user to Fesszattp edit an exception list where addresses In Do not use proxy server For addresses beginning with the list will not be connected via the proxy piee aaan server The addresses can be subnets Refer to the picture on the right for an Cancel Use semicolons Cito example of the exception list E a NOTE All functions of the proxy server are tested with the most A common Squid Proxy Server Some other proxy servers may not work properly User s Manual 6 9 Log Data The step by step operation of the CMS will be recorded by the CMS log function Refer to the following picture for data kept in the log file Settings Groups File path Event CMS User Sequence Login Setting Network Log Log File Save Time 2008 09 23 16 52 30 4008 09 23 19 21 48 2008 09 23 19 22 03 4008 09 23 19 22 07 4008 09 23 19 26 18 2008 09 23 19 26 25 4008 09 23 19 26 54 20080923 20 13 24 2008 0924 09 27 02 4008 09 44 09 28 11 2008 09 24 13 10 27 Action DisConnect Site user Same Split Mode 2x2 Start Record Site DVR Stop Record Site DWR Start Record Site DWR Local PlayBack
3. Right click on the channel and_ select Snapshot lt Talk On Off gt from the pull down menu If the talk function is successfully enabled Talk will be shown on button left of the image The user can speak through the microphone now to communicate with the Remove Ee gort camera side Image Adjustment Sound Notification On Ott Camera Info Camera covert On Off Motion Detection Object Search Currently supported 2 way audio types are Camera Type Audio Type NH Series IP Camera AL aw and uLaw audio type A NOTE RTP OVER RTSP Stream Protocol of NH Series IP Camera and all other audio types currently do not support 2 way audio A NOTE The communication mode is one to one Broadcasting function currently is not available 69 User s Manual 7 14 70 Instant Record Function While the videos are usually recorded to the connected DVR the user can choose to instantly record live and playback video clips to the local computer as an option Right click on the Site and select lt Start S e Connect Recording gt to start recording and lt Stop DisConnect Recording gt to stop recording Live Start Recording Configuration Event Search Playback Camera Setting While recording video and the mode is change from Live to Playback the recording will be temporary stopped The following message will be shown A In playback mode CMS will stop record function When returnin
4. Searches the LAN network for any available connected DVR Search Video Searches the connected DVR for any recorded video Record Records live or playback videos to the local computer User s Manual 1 1 System Requirement The following chart shows recommended computer system Pentium 4 2 0GHz Pentium A 3 0GHz Minimum 512MB Recommended 1GB Minimum 5GB HDD space is required if there is Im eessen Pre installed with more than 64MB RAM CPU Intel R Core TM 2 Quad CPU Q6600 2 4GHz RAM 2GB OS WinXp Display NVDIA GrForce 8400GS 512M Ethernet Gigabit LAN HUB Gigabit HUB Tested Connection With the above system the tested PC can stably Extreme connect up to 512 channels which is the same as 32 units of 16 ch DVRs NOTE This system is required when 16 AA Megapixel IP cameras with 1280x960 resolution are going to be connected AN NOTE If the operating system is Windows Vista some functions such as Record Auto Reboot etc will not work properly due to User Account Control UAC Follow steps below to solve this problem Step 1 If a previous version of CMS is installed export setting files of CMS servers 1 4 before installing the new version CMS Step 2 Due to UAC user account in Windows Vista cannot properly run applications that will write in C Program Files folder Therefore CMS will be installed in C folder instead Step 3 Once the new version CMS is installed impor
5. Stop Record Site DWR Logout Login Change Split Mode 8x8 Reconnect Site DVR 2008 09 24 13 10 43 Add Site DVR Channel Chi to Sequence 4 Export Import The list will display 1 000 items with latest ones shown at the bottom The list can store up to 10 000 items in circulation which means the oldest ones will be deleted when the number of items exceeds 10 000 Save button Click this button to save the log file to a desired destination Previous button Click this button to show previous 1 000 items Next button Click this button to show next 1 000 items 43 User s Manual 6 10 Export or Import Settings The export import function provides users the option to backup the settings as needed Settings Groups File path Event CMS User Sequence Login Setting Network Log Groups m ite Setting e Site Mew Site 4 Groups Ip Deo a A a i M ODODNS 01 New Group F01 New Site Port EE Username irs Password as Ce DVR IP Camera Model Stream Type a To export the configuration click lt Export gt and select a directory to save the zip file To import a previous saved configuration click lt Import gt and find the zip file that was previously saved AN NOTE After a setting is imported and saved the imported setting will be loaded immediately and the CMS will reconnect to the sites in the live group 44 User s Manual Operation of
6. ID Protocol This function resembles to the lt Dome Setting gt Focus This is used to manually focus on the objects Click on the lt Focus Near gt lt Focus Far gt icons to adjust the focus Iris This is used to setup the iris Click on the lt Iris Open gt icon let in more light or the lt lris Close gt icon to reduce the light 71 User s Manual 72 Zoom This is used to zoom in out to the object Click on the lt Zoom In gt lt Zoom Out gt icons to adjust It can also be adjusted by scrolling the wheel of the mouse CMS zoom function will be disabled in dome camera control mode Scroll toward the user to zoom out and away from the user to zoom in Direction Button Click on the arrows to pan and or tilt the dome camera Speed Slider Bar The slider bar is used to adjust the speed of the pan tilt movement 0 is the slowest and 100 is the fastest Mouse Control lf the mouse is moved to the top bottom left right edge of the screen a red triangle as in the picture on the right will show up At this time left clicking the mouse can move the screen toward the direction where the red triangle points to Zoom Ind Out using the scroll wheel of the mouse A NOTE The lt Dome Control gt panel is different if the dome camera is connected through a Video Server Refer to the following figures for detail information There is an extra button as circled in the picture on the right that allows the user t
7. CMS User Sequence Login Setting Network Log Alert Event Full Screen Enable OFF il Enable GFF Event Recording Duration 15 SEC Export Import AN NOTE If the user reconnect or disconnect the sites the list of the event full screen will be cleared NOTE Once the list of the event full screen finished playing the window will return to former viewing status Step 4 Alert Action The connected DVR sends 4 types of alert message State to the CMS Alive Alarm Motion and Video Loss Alive messages are sent when the notification option is set to lt Alive gt or lt Both gt in the connected DVR Alarm Motion and Video Loss messages are sent when the notification option is set to lt Event gt or lt Both gt in the connected DVR 33 User s Manual 34 Viewing the alert events When the alert is triggered while the alert function is turned on an icon will be shown in the system tray to indicate that an alert is being triggered Right click on the icon and the menu Alert Info as shown on the right will be displayed a e Choose Alert Info gt to show the following window Alternatively double click on the icon can also display the Alert Info window e Choose lt Exit gt to remove the icon from the system tray m Alert Info Mo __DATE TIME Local _ DATE TIME DYR _ SITE NAME UNIT NAME CH IP A 7 DyR64 DYR 192 168 6 53 80 Beien SE NOTE The maximum number
8. EE TT EE 69 Gem WINS AE are EI e Le EE 70 2 193 Dome Set ng Dome COMM Ol euer geet EE 71 7 16 Schedule Record FUNCTION 2 0 0 0 ccc ccc ccc ccc eeeeeeeeeeeeeeeeeeeaeeeeeeeeeeaeeeeeeeeneaneaeeeees 73 BW EFA DEE 82 Pe nd NR Elte le DEE 86 Pale Mee n Led e EE 87 7 20 JOYS CK Contool El ei de oa cect scctsonerorcencucccuouttcctsouthaeelonsuendiontiensieetioctionctantueness 88 Appendix A The CMS Player E 90 Appendix B Troubleshooting EE 96 User s Manual Overview The Central Management System CMS offers a simple and centralized monitoring interface for the video surveillance equipments It gives the user access to monitor multiple DVRs and allows the user to simultaneously monitor 64 sites per group up to 10 groups within several clicks IP Dome Analog Dorme iP Camera IP Camera Video Server ee ee ee ee ee ne oe g Network BNC Cablo Features Monitor Multiple Sites Supports up to 10 groups each group can add up to 64 sites Alert Function LAN Only Sends live event video clips and messages to the local computer from all connected DVR s Connected Configuration Configures the settings of the connected DVR s Remote Playback Allows the user to view recorded video stored in the connected DVR s HDD Information Displays information of all disk drives that are being used on the local computer Dome Control Remotely operates the speed domes via the Internet Search Devices
9. Internet Adpcm g 711 a law HTTP MJPEG H264 g 11 u law RTP RTISP MJPEG H264 9 711 alaw 9 711 u law 711 a law 9 711 alaw g 711 u law g 711 u law RTP RTSP MPEG4 Unsupported RTP RTSP MPEG4 Unsupported AN NOTE Each group can only connect to at most 16 IP cameras HTTP MPEG4 MJPEG User s Manual 6 3 Setup the File Path The file path menu defines stored destination of snapshot archive files and recorded videos It is recommended to use the default folders Settings Groups File path Event CMS User Sequence Login Setting Network Log Path Circular Snapshot path C Program Files CM5 Snapshot Bech Ku Type By size Archive path C Program Files CMS Archive ee eed Snapshot type Record path C Brnp cif CAPragram Fies CMs Record ti Jpg Record Path The recorded videos can be stored in more than one folder Click on lt Advance gt and the following window will be shown Record Path C Program Files CMS Record Browse Cancel Enable Browse Clear Clear All Enable Browse Clear Enable Browse Clear Enable Browse Clear The number of selectable folders equals to the number of HDDs the PC connects to excluding HDDs with capacity less than 1GB Check the Enable box and click lt Browse gt to set more destination folders Each folder should be from different HDD or an err
10. ReConnect gt to try to establish the connection Record to the site The lt DisConnect gt option allows the Configuration user to only disconnect a certain site Playback Camera Setting 17 User s Manual The user can also rename the camera directly Add to Sequence by right clicking on the camera and selecting lt Rename gt The new name will be shown on the upper left corner of the camera s assigned grid Note that group and site cannot be renamed at the site tree By right clicking on the group icon the options Expand Tree shown as on the right allows the user to expand Collapse Tree or collapse the site tree Bandwidth amp Audio Click to choose bandwidth option Choose lt High gt when the internet speed is fast and lt Low gt when the network is congested Next to the bandwidth option is the audio button Click to turn on off the audio GR Gj OFF Ge ON NOTE Turning ON OFF the audio on CMS will not affect the audio setting of the connected DVR s HDD Info The pie chart on the bottom left displays the HDD information This is especially useful when the user uses the CMS to record the video to the local computer Scroll down the menu to see the information of all the HDD s installed on the local computer such as C drive D drive etc The blue part of the pie chart indicates the used space and the yellow part indicates the available space The information will be updated e
11. SITE 1 Event Search SITE 1 Search By Event Search By Text NO DatefTime 1 Exception 1 Channel e Play Event Double click to play event C Archive Event Previous Next Search by Text Item ll Item J Search by Numerals Type Value Yalue Upper limit l Search by Date Time Start Time X End Time oona d Search by Channel 63 User s Manual 64 To archive the event video Select Archive Event and press the Ctrl key to select multiple event videos to be archived The maximum items can be selected is 1 000 which is the capacity of the list Event Search SITE 1 Event Archive SITE I yom NO Date Time Type Channel Ei 1 2007 12 17 12 11 20 M 2 2007 12 17 12 20 57 M 3 2007 12 17 12 22 38 M Aa Status 4 2007 12 17 12 26 58 M 5 5 M 6 M 12 2007 12 17 12 20 57 Archive 2007 12 17 12 26 58 Wat 2007 12 18 03 44 49 Wat 2007 12 17 12 26 58 2007 12 18 03 44 49 C Pla Archive Event Press Ctrl to multi select Start Archive p Previous Next Click on Start Archive and an Event Archive window will pop up The progress bar shows current downloading position The status column shows the event is under Archive Wait or Done condition NOTE The event archive or normal video archive for different sites can be performed simultaneously 7 11 CMS Motion Detection Users can setup motion detection at CMS site individually R
12. Si Browse SnapShot Type Iw Bmp Iw Jpg IT Gif TI mg SAVE 92 User s Manual Snapshot Click on the lt Snapshot gt icon to capture a snapshot of the screen When the snapshot window is opened you can choose to rename the filename or leave it as it is Click on lt OK gt to save the snapshot or lt CANCEL gt to discard it x i CANCEL Save File Name SnapShot_2008_05_29 16_17_45 Display Modes Click on the lt 2X2 gt lt 3X3 gt or lt 4X4 gt icons to view the camera images in multiple window mode Click on the lt FULL SCREEN gt icon will enlarge the CMS Player window to fit full screen The other way to change the CMS Player window to normal or full screen mode is by right clicking on any grid with video and select Image Adjustment the option lt Full Normal Screen gt Note that by pressing lt Esc gt key Cameta Info Object Search on the keyboard the CMS Player window can also return to normal screen mode from full screen mode NOTE Image Adjustment and Camera Info are described in the previous sections Object Search will be introduced later on 93 User s Manual Playback Controls Play Pause Click on b to start playing back the video The icon will change to u showing that the video is now playing Click on D to pause playing back the video Fast Step Backward Click on al to play the video fast backward When the playback of the video is paused click on this i
13. being retrieving The following figure is an example Note that since IP cameras do not have connected HDD they will not be shown in the chart Health Status Refresh Rate 5 min Site 01 Device Name Internal External Total Size Active NonActive Temperature Maxtor 4R160L0 Internal 147GB Active 37 Site 02 Device Name Internal External Total Size Active NonActive Temperature Maxtor 4R160L0 Internal 147GB Active 36 Site 04 Device Name Internal External Total Size Active NonActive Temperature Maxtor 6Y080L0 Internal 71GB Active 50 Site 05 Device Name Internal External Total Size Active NonActive Temperature Maxtor 7Y250P0 Internal 228GB Active 42 The information items shown in the chart are described as below Device Name This item shows the model name of the HDD Internal External This item indicates whether the HDD is an internal or external device Total Size This item indicates the total size of the HDD Active Non Active This item indicates whether the HDD is active or non active Temperature This item indicates the current temperature of the HDD in Celsius degree NOTE Temperature data is not retrievable for some specific models Under Temperature column it will show Not available 7 19 User s Manual Lock Function The Lock function allows the user to protect the CMS from unauthorized use when there is need to be away from the computer for a while Closing t
14. com Settings Groups File path Event CMS User Sequence Login Setting Network Log Groups Site Setting La All GIS Site New Site Groups IP 8 01 New Group 01 New Site Port Booo Username ein Password sl Ce DOYR IP Camera Model i Stream Type Search Export Import Cancel NOTE Port number does not apply to DDNS entries Therefore if the A lt D DNS gt box had been checked the port number does not need to be changed 21 User s Manual 6 2 4 28 Setup the IP Camera Site Manually lf an IP Camera is going to be added to the CMS the required information includes the IP address port username password and brand model type of the IP Camera Enter the data and select IP Camera as circled below Then choose the lt Model gt and lt Stream Type gt of the IP Camera Click lt OK gt to complete the setting Settings Groups File path Event CMS User Sequence Login Setting Network Log Groups Site Setting Cl l Site New Site a Dee IP 192 168 7 UD pjpms O01 New Group e 01 New Site Fort bur Username admin Password Ee DVR e IP Camera Model x Stream Type Search Export Import Cancel Supported IP Cameras MS ADPCM 2 Way Audio RTP RTSP g 11 a law g 711 u law MPEG4 MJPEG Intranet 2 Way Audio RTP_Over RTSP MPEG4 MJPEG g 11 a law g 711 u law
15. components of the CMS Installation Setup CMS Required The CMS main program Default Check to create shortcuts in the Start Menu and on the Desktop NTP Network Time Protocol Server Check to install the NTP Start Menu Shortcuts Network Time Protocol Server Default Setting Old setting will be deleted Check this box to load default setting or uncheck it to load the old setting of previous installed CMS User s Manual Step 4 The CMS main program will be the first program to be installed Choose a folder to install the CMS or it will be installed to the default destination folder CMS Click lt Install gt to start the Installation or click lt Back gt to go back to the previous step d Setup will install CMS Installation in the Following Folder To install in a aa different folder click Browse and select another Folder Click Install to start the installation Destination Folder C Program Files Ch151 Browse Space required 33 4MB Space available 4 16B Cancel lt Back Install NOTE If the PC has not installed Microsoft Visual C AN 2008 SP1 Redistributable Package x86 an alert message will be shown as below Click lt OK gt and the installation will be terminated Access the following link http www microsoft com downloads details aspx FamilyID a5c84275 3b97 4ab7 a40d 3802b2af5fc2 amp DisplayLang en and click lt Download gt to download and install it y CMS S
16. do so Click on lt OK gt to save and exit the Schedule Record Schedule Record 2008 12 26 H Se SE 19 User s Manual Select Clear Cell by Date Time Another way to select or clear time frame is by click on the Day or Time tabs For example when you click on lt Tuesday gt tab the color of all Tuesday cells will be changed indicating they are going to record normal and event videos When you click on 5 00 5 30 tab color of all 5 00 5 30 from Monday to Sunday will be changed Click on lt OK gt to save and exit the Schedule Record Schedule Record Leg seg E lt EN Katar HEET Schedule Record Functior i Site 1 dax E EE 80 User s Manual Special Schedule of a Specific Date If you wish to setup a special schedule for a specific date simply select a date from the pull down menu of lt Holiday Setup gt and click on lt Add gt On the right of the lt Schedule Record gt window you will see a new day cell as shown in 3 Setup the schedule for that day and the schedule record will only run once for that special day Schedule Record EN 1 Schedule Record Setting 2 5 01 MegaPixelCamera Holiday Setup ER Cam 1 Schedule Record Function E a j ai RECORD BY SITE OEE setect ce M Decem
17. function is for users to ES Talk Onoff keep an eye on the important object Right click on a desired grid and select lt Object Search gt from the pull down menu The object detected search Dome Setting Dome Control Ee sort window is shown as below Remove Image Adjustment Users can setup at most 8 monitoring areas The Sound Notification On Off a S r f Camera Info boxes will be invisible in Live mode Click on lt Clear Motion Detection All gt button to delete all boxes Alternatively right click on any single box to delete it individually Object detected Search Double click to play Video Preview Please set detection area Grea Mo Time 2008 12716 19 17 43 2008 12 16 19 19 42 2008 12 16 19 20 07 2008 12 16 19 20 31 Configuration Sensitivity Interval 3 Sec Enable Function Stop Simulation Apply Clear All Sensitivity Setup a desired sensitivity level Interval The time specified here is for determining the lost of objects If an object is removed from the selected areas for more than the time specified here lost of object alert will be triggered 66 User s Manual Enable Function Check on it to start monitor motion detection Apply Click on it to save and apply settings in the configuration section Clear All Click on it to clear all selected boxes Start Simulation Click on it to start simulating object detection As shown in the previous page green b
18. in Mouse Control mode and Dome Camera Control mode Refer to the picture on the right for a sample of joystick The requirement of the joystick is as the following 1 12 buttons 2 X Y and Z axis Press button 8 to change between mouse or dome camera control modes However if the selected camera is not a dome camera the joystick can only be in Mouse Control mode NOTE Only the first launched CMS server can use joystick control function When CMS detected an available joystick a system tray icon will be displayed Right click on the icon and a menu will be shown as on the right Select lt Joystick control On Off gt to switch on off joystick control Select lt Show joystick function gt will display a hint screen showing functions of the keys according to the control mode either mouse control or dome camera control User s Manual Whenever the joystick control mode changes a message will be shown at the system tray to inform the user Refer to the following tables for controlling options Under Mouse Control Mode Left Right movement Up Down movement Clockwise to speed up Counterclockwise to slow down movement 8 Change to Dome Camera Control mode Left clicking key Right clicking key Under Dome Camera Control Mode e rison S 8 Change to Dome Camera Conirolmode e Enter OSD Menu P Dome 89 User s Manual Appe The CMS Player is a compact version of the standard DVR Pla
19. lt EXIT gt to exit the lt CMS Setup Menu gt CMS USER S MANUAL EXIT NOTE If an older version of the CMS had been installed in the local computer a message box will be shown during the installation Click lt OK gt to uninstall the previous version CMS Setup Another version of CMS had been installed already Click OE to remove the previous version or Cancel to abort Ceci User s Manual After clicking lt OK gt an lt CMS Installation Uninstall Confirmation gt dialog will be displayed Click lt Uninstall gt to uninstall the older version and continue with the next step e CMS Installation Uninstall Confir Lb This wizard will uninstall CMS Installation from your computer Click Uninstall bo start the uninstallation Uninstalling From C Program Files CMS Cancel Step 3 Select the components that are going to be installed It is strongly recommended to select the lt Start Menu Shortcuts gt to create shortcuts in the Start Menu and on the Desktop Otherwise whenever the program is to be opened it will have to be found under the path CMS EXE CMS exe Click lt Next gt to go to next step amp CMS Setup Installation Options Check the components you wank to install and uncheck the components you don t wank to install Click Next to continue Select components bo install CMS Required Start Menu Shortcuts Space required 33 4MB Cancel The
20. the following figure for details Attribution Setup CMS Group Attribution Select CMS Group NewGroup01 Function List Ga 0 a a Si e GE Ok Cancel Camera Attribution Setting Select Connect Group In New Group v Enable Video l al CH Camera Enable AN NOTE The preset is 16 cameras for all sites The real number of cameras per each site will not be detected NOTE These settings will affect the whole operation of the CMS Please be very careful while configuring the settings Next time when you login you can choose to enter the CMS either as the admin or the user 38 6 6 User s Manual Sequence This function is used to set the displaying Add ta Sequence sequence Before starting sequence display you need to add channels to the sequence Rename list Right click on any channel and select lt Add to Sequence gt to add or lt Remove from Sequence gt to remove Note that when the channel is added to the sequence a capital S will be shown on the icon After the channels are added to the sequence click on the lt Setting gt icon and choose lt Sequence gt to setup the sequence Under the lt Sequence Setup gt option you can setup the dwell time 1 to 120 seconds and split mode 2 2 3 3 4 4 or 5 5 lt Sequence Order gt lists the channels that have been added to the list in order Click lt OK gt to save the settings Settings Groups File
21. 17 40 SONS 0922 11 19 26 Start Time 2008 09 22 11 16 00 End Time 2008 09 22 11 19 54 Configuration Sensitivity Interval Enable Function Apply Clear All Quick Search Click on it to quick skim through the video for object search of the selected area s The list will be filled when lost of object alert s found Playback Control When users double click on the list to start the playback a pause button will appear next to the lt Quick Search gt button After users clicked the pause button the playback control buttons will be shown as below that allow users to step forward backward the video 95 User s Manual Appendix B Troubleshooting The followings are some common situations when the user is having difficulty with the CMS server 1 The CMS server does not work properly How can it be recovered or where can ask for help Please try the following ways to recover it first A Please check if the computer meets the system requirement B If the CMS automatically closes when it s opened or when it s connecting to sites please send the files stored in CMS Setting under improper operation condition Afterwards re install CMS and check to install Default Setting during installation Remember not to import old setting files This will tell whether if the old setting data are corrupted CMS Setup Installation Options E Ed gt Check the components you want to install and unchec
22. 3 DRY File Name Status C Program Files CMS Record RecordFolder00000001 CMS01_R C Program Files CMS Record RecordFolderO0000002 CMS01_R AN NOTE The list can contain files from different folders The messages shown on the conversion list windows are very important If the duration of a DRV file is less than 3 seconds the file will not be successfully converted In addition a link is provided for users to download and install video codec in order to playback the converted AVI files User s Manual If you wish to remove any file Teieeregt 1 IF the time interval of a DRY file is less than three seconds CMS player will not be able from the conversion list right to successfully convert this file click on the file and select 2 Please download and install the codec From http wua Filehippo com download_klite_codec_pack 3723 lt Remove gt or lt Remove All gt to delete files from the list Click a rere See 1 C Program Files CMS Record RecordFolderO0000001 CM501_R lt Convert gt to start conversion 2 C iProgram Files CMS Record RecordrolderO0000002 CM501 R Remove of files on the list A small window will ispl sma do be displayed as Converting file No below to show the progress of Converting conversion If you wish to terminate the conversion click lt STOP gt to abort If the conversion is aborted the PeT 1 IF the time interval of a DRY file is less than
23. CMS TEMP_RECV if the file size is less than 100MB Once the file size reached 100MB the file will automatically be transfer to the designated remote network disk If the recording is interrupted either connection reset disconnected stop recording etc a progress bar will be shown to inform the user that the DRV file is being transfer to the the designated remote network disk NOTE For CMS servers 2 3 the temporary folders will be name TEMP_REC2 TEMP _REC3 and TEMP_REC4 Snapshot Type The CMS has a snapshot function and the file type for snapshot can be defined here Note that if more than one type are selected take 2 types for example then each snapshot is saved to 2 types of files They are the same image but in different formats For instance if Bmp amp Tif are selected and the Snapshot is taken two types of image files of the same snapshot image will be created User s Manual 6 4 Alert Events The alert function enables the connected DVR s to send alert signals to the CMS within the network This section describes how the alert function works Setting up the alert function Step 1 Find the IP address of the local computer Go to Start menu select Run of earch avroorams gt Ci Ei Log KU Io Turi OFF Comoubes Type in cmd and click OK mm Type the name of a program folder document or CT internet resource and Windows will open it For you Lien cmd Type in ipconfig to get the
24. CMS to record the site from 2 00 to 4 30 on Tuesday and Wednesday Click on 2 00 2 30 of Tuesday and drag to 4 00 4 30 of Wednesday and the color of the cells will be changed to green indicating that these cells are going to record lt Schedule with Event gt Schedule Record Schedule Record Setting Holiday Setup Schedule Record Funct unction 2008 12 26 v Site 1 RECORD BY SITE GEESE v SELECT CEL m MegaPixelCamera ER Cam 1 Step 3 After the time frames are selected click lt OK gt to save and exit the Schedule Record T User s Manual 78 Clear Selected Cell lf you want to remove a time frame from the schedule for instance 3 00 3 30 set the cell selection to lt Clear Cell gt in box 1 Click and drag 3 00 3 30 from Tuesday to Wednesday The blank cells indicate that they are not going to record anything Click on lt OK gt to save and exit the Schedule Record Schedule Record Schedule Record Setting m MegaPixelCamera ES Cam 1 Holiday Setup Schedule Record Eu dFunction 2008 12 26 v Site 1 RECORD BY SITE User s Manual Select Clear All Cell lf you want to set the schedule to record at all times set the cell selection to lt Select All Cell gt or click on the circled blank cell located on top left corner of the table If you want to reset the schedule of the site set the cell selection to lt Clear All Cell gt to
25. Central Management System User s Manual Version 3 4 0 rel date 2 23 09 Optiview Inc Table of Contents Se e EE 3 1 1 System Requirement EE 4 Vet oupponed IF Camera EG 5 eh TC Ta E O BEE 6 ee Ee Lt EN 11 E a UN e LE 13 2 So WE ai Let E e E as arateane araeengn EREE EEEE 13 ge elle EE 14 Buttons Available on the Main WIndOW ccccssccseseeeeseeeeneeeeseeeeseeeesesenseeeesesonees 15 CO in e IC mne e LE 19 I Saati cineca bart E E EREE E 20 AU oa tes iene neve wecetece EEI EEN NE E E E A O E E 23 6 2 1 Add Remove ET 23 6 2 2 Setup the Site via Device earch 24 6 23 Setup the DVR Site TU EE 26 6 2 4 Setup the IP Camera Site Manually cccccccccccceeeeeeseeeseeeseeeeeeeees 28 Ca SEENE FIE P EE 29 SE EE 31 Co ei ER 35 SE el E Le 39 I I PEE E E EETA A EEEE 40 oo NEVO E ee 42 er EO RR a E E E A E EOE 43 010 Export or impon oe le re 44 Operation of the CMS ssnnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnne 45 7 41 View Live Image Assign Camera E 46 Poe Camera Seting Camera Rn e DEE 49 L E e e ut e E E E EENEI TEE EE 51 7 4 Zoom In Out Control via e 52 lo Sequence Te VEER 53 CO PONS AN EEN 54 1 Playback Recorded Re E el 7 8 Configure the OSD Menu of the Connected Gute 61 LI o S Date ee e EE 63 AI CMS Moton ET e E 65 r d ele ener ene een ern e er rn mer en ree Creme mn ene eer TA 66 PR WE a Le E 68 User s Manual lelo ay PC
26. Channel Base Select Channel Base gt from the menu and click lt Load gt to select a sound file Then click lt OK gt to save the setting Next right click on a channel grid to apply the sound setting by selecting lt Sound Notification On Off gt from the pull down menu Note a message window will arise if sound file is not selected yet Camera Setting view Setting Sound Notification W Show Site Name Channel Base G w Show Time Filename dive wav Load Cancel wf Show Channel Name Quick Hot Key Click a channel grid and press the following keys e Cirl n Sound Notification ON e Ctrl f Sound Notification OFF Snapshot Ee sort Remove Sound Notification Gn Ot Camera Info Camera covert On Off Motion Detection Object Search NOTE The sound files selected will be saved in CMS folder Setting SoundNotification A NOTE On the top left of the grid will show SN to indicate sound notification is turned on 49 User s Manual 50 Setting via Site Base Select lt Site Base gt from the menu and check the option lt Sound Notification enabled for All Channel gt and or lt Same sound for all sites gt as needed Click lt Load gt to select a sound file Then click lt OK gt to save the setting The sites have the option lt Same sound for all sites gt checked will play the same sound and the latest set sound will be played Camera Setting View Setting Sound No
27. Event M5 User Sequence Lagin Setting Network Lag User Information CMS User List Admin User Name ch SR 01 admin Password dette i TAS AY Export Import 35 User s Manual 36 After the group is added the first user account of the group will also be created You MUST set the password for this account before you can go to the next step Settings Groups File path Event OMS User Sequence Login Setting Network Log User Information CMS User List Admin User Mame GroupO1Userd1 K Io admin F al User List 01 Group0ilserti Group Attribution Setting Export Import Right click on lt NewGroup01 gt to add a user remove a group or rename the group Settings Groups File path Event CMS User Sequence Login Setting Network Log User Information CMS User List Admin 01 admin Password Gi EI OTI NewGroupt O1 Groupo1 Add a user User Warne Remove a group Rename Group Attribution Setting Export Import AN NOTE The account currently used to login cannot be deleted A Cannot delete account currently used to login User s Manual Right Click on lt Group01User01 gt to remove a user or rename the username Settings Groups File path Event CMS User Sequence Lagin Setting Network Lag User Information CMS User List Admin User Mame GroupO1Usert1 f Io admin I
28. IP Address of the local computer Write down the IP address on a piece of paper for later use c ICs WIDOWS UE SA RE k wll sl Microsof E Windows SP Vari ion 5 1 2606 ZC at pe ight iva5 27OR1 Aicrozoft Ga rp 2 3Documente and Bott ingg VTT ke anf ig Hindous IF Canf igurat ian Ethernet ada PtCer Local Area Connection Lonnane tions pec ifie DHS Suffix IP Addeess a gt a a H E K rr ds H 73 Be Lee Subnet Mack a L KASS Aen T E d E d D 1 n D s k a at DeFault Gateway ew ww sa a 97 168 7 254 Co Docunments and Settings Dimer 31 User s Manual Step 2 Setup the lt Alert Notification Setup gt on the connected DVR s The 32 lt Alert Notification Setup gt allows the user to send alert notifications to the CMS program which had been installed to the computer Alert Notification Setup 1 Alert Configuration Set 1 2 Alert Notification OFF 3 Alert IP 192 168 7 122 4 Alert Port 9999 5 Alive Interval 120sec Alert Configuration Set lt Alert Configuration Set gt provides 3 combinations of Alert Notification IP and Port The user can match the connected DVR to at most 3 different CMS servers Alert Notification 4 options are included in this item lt OFF gt lt Event gt lt Alive gt and lt Both gt lt OFF gt TheAlert Notification is turned off lt Event gt When the alarm is triggered the DVR will send an alert message to the CMS lt Alive gt The DVR wi
29. Manual 7 7 Playback Recorded Video This function allows the CMS user to retrieve and play videos stored in the connected DVR Click on the lt Playback gt icon the figure below will be displayed lt Valid Time gt indicates that the connected DVR starts recording from a certain period of time and ends at a certain period of time Site 01 DVR 202 168 200 162 Valid time Start 2008 09 21 11 59 17 End 2008 09 24 14 10 49 Selected time Function Start Time End Tmmefmp e Playback Bier Archive 11 59 17 B Cancel Playback the video stored in HDD of the connected DVR To play the video stored in the connected DVR please follow these steps Step 1 To play the recorded video stored in the Function connected DVR select lt Playback gt in Playback Function area archive Step 2 Specify the starting time that you want to playback by setting the lt Selected time gt or by moving the arrow to the left backward or to the right forward and click lt OK gt to play the video Selected time Function Start Time End TimeTmp e Plavba E o9 21 vw Archivi 11 59 17 ebe 55 User s Manual The other way to playback video is to NN Tester right click on the site and select DisConnect lt Playback gt gt lt Remote Playback gt Live from the pull down menu Record t Configuration Event Search Local playback Playback Remote playback Cameta
30. Setting Save the drv files to your local computer To save the video to the local computer please follow these steps Step 1 If you want to save the drv files to the Function local PC click lt Archive gt Playback eet start Step 2 Specify the Start Time lt Set start gt and End Time lt Set end gt and click lt OK gt to save the DRV file to your designated archive path The default archive path is CMS Archive Step 3 After the user click lt OK gt the CMS will play the archived playback Close the lt Archive gt window to exit Archive SITE I EOR FROM 2008 09 22 16 05 17 TO 2008 09l22 19 22 08 Now 2008 09 22 18 05 19 a ESS 56 User s Manual Playback video stored in the HDD of local computer There are two ways to playback the videos stored in the local computer Note that this is for playing videos that have already been saved to the local computer Click on the lt CMS Player gt icon or right click on the site and select lt Playback gt gt lt Local Playback gt Ke Connect Dis Connect Live Record Configuration Event Search Playback Remote playback Camera Setting After selection the CMS Player will be displayed The CMS Player which is a compact version of the standard DVR Player is shown as the figure below CMS Player See CMSPlayer NOTE The CMS Player can only be opened within the CMS program If you try to open
31. T ONLY Schedule to record only the event videos within the selected time frame A NOTE The lt Clear all gt button helps users to clear up the schedule setting in all recording types 74 User s Manual The scroll down menu circled below shows the schedule options Schedule Record Schedule Record Setting g 01 MegaPixelCamera Holiday Setup Schedule Record Function Cam i 2008 12 26 sl mi RECORD BY SITE si SELECT CELL CLEAR CELL SELECT ALL CELL CLEAR ALL CELL Cancel EzRecord Clear All Select Cell To manually select cell from the table Clear Cell To manually clear cell from the table Select All Cell To select all cells from the table Clear All Cell to clear all cells from the table 19 User s Manual Follow steps below for an example of setting schedule record for the CMS Step 1 Select a site or a channel from the box on the left by a single click When a site is selected the same setting of schedule record will be applied to all channels Click on a channel to set unique schedule record for the particular channel In this example we will choose to set a site Select a site in box 1 and set the recording option to lt Schedule with Event gt in box 2 Schedule Record Schedule Record Setting Holiday Setup Schedule Record Function 2008 12 26 ei Site 1 RECORD BY SITE 2 76 User s Manual Step 2 Assuming that we want to set the
32. User List Password 01 MNewarouphi oi Group User Remove a user Eename Group Attribution Setting Export Import The lt Group Attribution Setting gt is for setting up the privileges of the selected user You can give each user account different privileges by configuring this function Settings Groups File path Event M5 User Sequence Lagin Setting Network Lag User Information CMS User List j Admin User Name Group01Userat toi cet User List Password EE E 01 MewGroup 1 D1 Sroup lUser01 Export Import 3 User s Manual After entering the lt Group Attribution Setting gt the following diagram will be shown Select a user account in lt Select CMS Group gt and you can click on the buttons to enable or disable its privileges Attribution Setup CMS Group Attribution Select CMS Group NewGroup 1 x Function List Per Site Per Camera EEEN EAA Advance Setting Purple buttons are CMS menu controls including Playback CMS Player Emap Schedule Record Setting and Lock Gray buttons are site controls including ReConnect DisConnect Record Configuration Event Search and Camera Setting Yellow buttons are camera controls including Sequence Rename Dome Setting Dome Control Remove and Sound Notification Each camera can be set to enable disable Live Play or Record function individually after clicked on lt Advance Setting gt Refer to
33. ber 2008 A GEN e Gun Mon Tue Wed Thu Fri Gab 1 2 3 4 5 3 Hou 2008 12 26 Cancel EzRecord Clear All 81 User s Manual 7 17 E MAP Function E MAP is a function that allows the user to illustrate the positions of the cameras on a self selected image Click on the lt Emap gt icon to open E MAP Please follow the steps below to setup the E MAP Step 1 First load an image file by clicking on lt Load Image gt icon NOTE The image shown in the window is the default picture It will only be available when default is installed Step 2 The figure below is the Load Image window to add or delete images and undo or confirm settings Click on lt Add gt to add an image Note that E MAP only supports omp jog and of files Load Image E MAP Emap ImageList o 82 User s Manual Step 3 After the image is added the filename of the image will be displayed on the list Index indicates the order starting from 0 of the files After the image is loaded click lt Ok gt to confirm and save the setting Load Image E MAP Emap ImageLis 2 Ooo Emapa O thestorejpg pS ees Ooo Ooo pT EEE sl HN Delt RS OEE pT pT EEN ERR Ooo Oo BEER Step 4 Select the image file that was loaded to E MAD from the scroll menu lt Please Select Image gt Step 5 The chosen image will be displayed in the E MAP main window The image of a grocery store is used in the foll
34. can reconnect to it by right clicking on the Site and select lt ReConnect gt from the pull down menu You can also disconnect specific sites by selecting lt DisConnect gt from the pull down menu Auto Detection of Disconnected Sites The CMS will automatically detect if any Disconnection List of Client Devices sites that are connected at the beginning Ee Connect DisConnect Live Eecord Configuration Flayback Camera Setting DATETIME Local GROUP SITE are disconnected for some reason later TENETE i 2008 09 24 17 10 03 on in every 3 minutes A list will be shown 2008 09 24 17 10 03 2008 09 24 17 10 03 as on the right when there are sites detected to be disconnected The list can be saved as a TXT file by clicking on lt SAVE gt at bottom left 01 New Group 01 New Group 01 New Group 01 New Group NOTE Besides auto reconnect a progress bar will be displayed as below The connecting process will take at most 30 seconds User s Manual Auto Reconnect of Specific Disconnected Sites The CMS will automatically reconnect to specific disconnected sites every 7 minutes Refer to the following table for all cases Sites that are not connected at the beginning Sites that are disconnected manually Sites that are connected at the beginning but disconnected for some reason later on Assign a Channel Site to Certain Window s The CMS allows you to assign any channel site in the
35. cked the pointer will become L to indicate that the image is dragged NOTE This function is not available in Dome Camera Control mode A Scrolling the wheel of the mouse will zoom in out the camera lens of the dome camera A NOTE This function will use up a lot of CPU resources It is A recommended not to open too many programs at the same time to avoid crash of CPU 1 9 User s Manual Sequence Display To start displaying the sequence list click on the lt Sequence gt icon to start the sequence The color of the icon will change to red color when the sequence mode starts The display mode will be what was set in sequence setup 2 2 3 3 4 4 or 5 5 Another way to start displaying the sequence list is by right clicking on the sequence icon and a list will be displayed as shown below Move the mouse to any item and the preview window will be displayed on the right This list gives choices to the user to begin displaying the sequence from any item Double click on the desired item to start sequence mode After the sequence is started you can still change the split mode by clicking on the display mode icons for 2 2 3 3 4 4 or 5 5 However the starting split mode set in lt Sequence gt will remain the same Note that icons for 6 6 7 7 or 8 8 will not be accessible because they are not allowed to be shown in sequence mode The following functions are disabled in sequence mode 1 Right click to see channel menu 2 Zo
36. con to move one step backward Fast Step Forward Click on k to play the video fast forward When the playback of the video is paused click on this icon to move one step forward Site Tree The site tree shows the channels of the opened DRV file Double d Siet NEG click on a channel to view the selected channel in one screen Right E Ch E Ch E ch click on the site tree can choose to expand or collapse site tree Audio Click on the lt Audio gt icon located underneath the site tree to enable or disable the audio of the opened DRV file Slider Bar Click and drag the bar to search through the video Speed Indicator V A Slider Bar Speed Indicator The Speed Indicator shows playback speed in forward or backward direction gt indicates forward playback while lt indicates backward playback e The playback speed can be 1 2 4 8 16 or 32 94 User s Manual Object Search Right clicking on any grid with video and select the option lt Object EE Sereen search gt The basic configuration of object search function in the Image Adjustment CMS Player is the same as what is in the CMS Please refer to the Camera Info section Object Search for more details This section will introduce the different part of the object search function in the CMS Player Missing Object Search Double click to play Video Preview Please set detection area Trigger Time POOMOG2 11 17 45 2008 0922 11
37. ddress on a piece of paper for later use ee TNS Sybem EMILE f icrozoft Windows KF TF red o Fi 2688 wg E REMET E 1785 2001 Aicroseft Corp C Documents and SettingsAmersipconf ig Windows IF CanFigurat ion Et harnet adaptar Local roa Connect ioni Connection specific DHE Suffix IP Address o eanne l 193 168 2 123 Subnet VEER DEE e a5 Ff a a a i 8 i i i d A a 7 K ch A Lk ER A KE Default Gateway s ss sasea gt 192 168 7 254 CcPociments and Sett ings Owners After the IP address is found setup the connected DVR s First go to lt Main Menu gt gt lt System Setup gt gt lt Date Time gt gt lt Time Zone gt to setup time zone To find out the local time zone please visit www greenwichmeantime com AN NOTE The lt Time Zone gt must be set or the lt Network Time Protocol Setup gt will not be accessible After entered the local time zone the lt Network Time Protocol Setup gt option will be accessible Go to lt Main Menu gt gt lt System Setup gt gt lt Date Time gt gt lt Network Time Protocol Setup gt and the following menu will be displayed Network Time Protocol Setup 1 NTP Server time nist gov 2 Automatically Time Sync ON 3 Manually Time Sync No In this example the NTP server should be set to 192 168 7 122 which is the IP address of the local computer After the NTP server is set select lt Manually Time Sync gt to sync t
38. del Stream Type j Cancel The other way to add a group is to right click on lt Groups gt and select lt Add a group gt Settings Groups File path Event CMS User Sequence Login Setting Network Log ES E Groups SH SEET a _Add a group J Expand all groups Collapse all groupe Export Import 20 elelee SS Site Setting Site IF Fort Username Password Ce DYR Model Stream Type a User s Manual Set Start Group Start Group is the group that will be connected after starting the CMS Right click on the group to be set as start group and select lt Set as start group gt from the pull down menu Settings Groups File path Event CMS User Sequence Login Setting Metwork Log gt Sroups 7 Site Setting Add a site Remove Rename Expand Collapse pet as start group Export Import NOTE If a group is set as the start group the icon will be changed A as shown in the figure below Settings Groups File path Event CMS User Sequence Login Setting Network Log gt LotOUDS m ite Setting Site IF Fort H 02 New Group 8 01 New Site sername Password Ce DYR IP Camera Model Stream Type Export Import 21 User s Manual Expand Collapse a Group There are two ways to expand or collapse a group One way is to use the b
39. ence Login Setting Metwork Log Groups Site Setting od a ry Site ZS GI SES IP R Greg Rename Expand Collapse Set as start sToup Export Import Cancel The other way to add a new site to a group is to right click on the group and select lt Add a site gt 23 User s Manual Remove a site To remove a site click on the site that is to be removed and click the button directly to remove the site Settings Groups File path Event CMS User Sequence Login Setting Network Log gt Groups m ite Setting Site Mew Site W Groups Ip P SE 8 a es D M ops L Pork Sp Remove Username 6B 01 New Group Rename Password Ze DVR IP Camera Model Stream Type Export Import Cancel The other way to remove a site is to right click on the site and select lt Remove gt from the pull down menu A new site can either be a DVR or an IP Camera and the number of sites equals to the number of the DVRs and IP Cameras The following sections will show how to setup configuration of the sites 6 2 2 Setup the Site via Device Search There are two ways to setup a site The simple way is via Device Search The CMS is able to search for the IP address of the DVR s or IP Camera s connected to the LAN The ports used for device search are 6666 and 6667 Please make sure that these two ports are not in use nor blocked by firewall or virus sca
40. etup Please download and install the redistributable package Microsoft Visual C 2008 SP1 Redistributable Package x86 from http Avww muicrosoft comMownloads Step 5 The NTP Server will be the next program to be installed The NTP server enables the local computer which is running the CMS to become a central NTP Server for the connected DVR s so the time for the local computer and the connected DVR s is synchronized Click lt OK gt to start installing the NTP Server amp CMS Setup NTE Network Time Protocol is the abbreviation of Network Time Protocol which is designed for timesyne cross the network The following web site would be a good start point if you wanna get know about this topic http w e pnip ota User s Manual Step 6 Click lt Close gt and the Software Installation is complete gr CMS Setup Completed Completed Show details NTP Service Server The NTP Service Server enables the local computer which is running the CMS to become a central NTP server for the connected DVR s so the time for the connected DVR s and the local computer is synchronized To do so the IP address of the local computer is needed Go to Start menu select Run All Pro ams gt Type the name of a program folder document or J Tnbernet resource and Wirsdiows vil open it for You User s Manual Type in ipconfig to get the IP Address of the local computer Write down the IP a
41. fig EXE Log 3 Record S RecordFolder00000001 RecordFolder00000002 RecordFolder00000003 Setting Setting2 Setting3 Setting4 SkinChange Snapshot 43 SPL A TEMP_REC TEMP_REC2 The lt Type gt column in box 3 shows whether DRV files are normal videos or event videos In addition event videos are categorized as trigger by devices DVRs or IP cameras settings or by CMS settings NOTE The recorded video of IP camera can only be played back by CMS player Some errors might occur if playing back with DVRPlayer 91 User s Manual Frame View Setting The user can choose to show hide the time and alert View Setting text on the video E show Time Show Frame Stabe Click on the lt Frame View Setting gt icon and the View Setting window will be displayed Check lt ShowTime gt and the time will be shown on the screen Check lt Show Frame State gt and the alert text such as motion or video loss will be shown Uncheck to hide the information File Path Setting Click on the lt File Path Setting gt icon to preset file paths for AVI conversion files and snapshot files Click on lt Browse gt to select desired folders In addition file type of snapshot pictures can also be selected Bmp Jpg Gif or Tif formats After the settings are selected click on lt Save gt to save FILE PATH SETTING FILE FATH AVI Convert path fe Browse Snapshot path
42. g from Playback mode to Live mode the recording will be resumed from stopping point When the channels are being recorded the title of the channels will show a capital letter R E at the end The recorded files will be saved to the default folder CMS Record AN NOTE If the connection to the recording site is disturbed and then reconnected the recording will be terminated without resumption 7 19 User s Manual Dome Setting Dome Control The users can also set control the dome camera in the CMS Right click on the channel where a dome camera is properly installed Refer to the following picture to see how they look like Dome Setting Snapshot SITE 3 CH R 7 eE Talk On Off Dome ID Dome Setting Dome Protocol ome Protoc Dome Control Re sort Remove Image Adjustment Sound Notification On Off Camera Info Camera covert On Off Motion Detection Object Search Dome Setting Select Dome Setting gt to setup the Dome ID or Dome Protocol Note that dome protocol changed at this interface is only temporary To permanently change dome protocol please modify it in the configuration Dome Control The function of each button on the lt Dome Control gt panel is described below A F Auto Focus Click on a to focus the camera automatically Set Go Preset Point Click on to seta present point and to go to the preset point ID Click on L to setup the Dome
43. he CMS is not allowed and other functionality will be limited as described below Click on the lt Lock gt icon and a confirmation message will be displayed as on the right Click Yes to confirm After the user clicked Yes the icon will be changed to show that CMS is currently being please key in username and password to unlock locked When the user clicks unlock the ge po window as shown on the right will be password f displayed for the user to enter username and password to unlock Ok To unlock the following are two scenarios Login Account Unlock Account Note User Login User Me sa access aun will still TT Ce JEE Administrator Login Administrator If password is ES use ee When the CMS is locked windows control will be as the following two types pe Example Windows Control 1 Setting Setting Schedule The windows will be closed without Record Emap saving changes It is recommended to Dome Control etc save settings before locking the CMS 2 Monitoring Archive Alert etc It is not allowed to close the window but just minimize it A NOTE If the CMS is forced to be closed while its locked the CMS system will still be locked when it is started up again A NOTE If the password of the current login account is changed use the new password to unlock 87 User s Manual 7 20 88 Joystick Control Function When a joystick is connected it can work
44. he time with the local computer The time sync can also be updated periodically Select ON for lt Automatically Time Sync gt and the time will be automatically synced once an hour User s Manual 3 software Upgrade The CMS will automatically connect to the FTP Server and check for upgrade every once a month If no upgrade is available the CMS will continue normal process If upgrade is detected please follow the steps below to proceed Step 1 A message box will pop up to inform that there is upgrade available Software Upgrade The FTF server have new OMS software version Would you want bo upgrade Click lt OK gt to download the upgrade software and continue to the next step Otherwise click lt Cancel gt to abort and continue to normal CMS process Step 2 Choose a destination folder to save the file Then a window will pop up and show the downloading status Download a Cer Source CMS Software Ledatehed CMSs CMS Release Hr o30 zm Target C Documents and Settings ichienveniMy TEST ae 574 KB from 7852 KB transferred 25 KB sec Remaining tine 4 min Click lt Abort gt to terminate the download and the CMS will be started as usual Step 3 When the download is completed the installation of the new version of the CMS can be started following the same procedures described in the Software Installation section User s Manual AN NOTE If the upgrade file is not completely downloaded an er
45. icons in E MAP dome camera fixed camera and alert icons sl Dome Camera icon gt Fixed Camera icon IS b ZK Alert icon Dome camera icon will be displayed when the selected camera is a PTZ pan tilt zoom dome camera Fixed Camera icon will be displayed when the selected camera is a fixed camera Alert icon will be displayed when an alert is triggered to the camera on the image The alert icon will blink to attract attention Change Emap Size You can adjust the display size of the image on E MAP by clicking on the icons described as below lt Original gt To display the original size of the image lt Double gt To double the size of current displayed image lt Half gt To reduce current displayed image size by one half lt Fill gt To adjust the image to fit display window refer to figure on the right f NOTE If there is no image file loaded on the Emap window an error message will be shown when clicked on any of the four buttons above NOTE When the image is very large or when you cannot see the AN entire image in the display window on the right click on a channel in the site tree and the E MAP will automatically move to the location of the selected channel 85 User s Manual 7 18 86 Health Function This is a function that verifies the HDD status of the DVR sites in current connected group Click on the lt Health gt icon and a progress bar will be shown to indicate that the information is
46. ight click on a desired grid and select lt Motion Detection gt from the pull down menu The motion detection setting window is shown as below Users can choose to monitor the complete screen or select up to 8 boxed areas after clicked on lt Regional gt Click on lt Clear gt button to delete all selected areas Alternatively right click on any selected area to delete it individually Motion Detection Setting Detection Region C ALL Enable Function Co Regional Motion recording Clear Video Preview Sensitivity User s Manual Snapshot Talk On Off Dome Setting Dome Control Re sort Remove Image Adjustment Sound Notification On Ott Camera Info Motion Detection Object Search Enable Function Check on it to start monitor motion detection Motion recording Check on it and the CMS will record event video when motion is detected The length of event video will follow lt Event Recording Duration gt specified in Event setting Start Simulation Click on it to start simulating motion detection As shown above red boxes will mark the motion areas Stop Simulation Click on it to stop simulation Sensitivity Setup a desired sensitivity level Click on lt OK gt to apply the settings or click on lt Cancel gt to disregard and return to Live mode The live monitoring screen will show the blue boxes 65 User s Manual 7 12 Object Search The purpose of object search
47. k the components Co YOU dont wank to install Click Next bo continue KS Select components bo install CMS Required Start Menu Shortcuts L_ NTP Network Time Protocol Server Default Setting Old setting will be deleted Space required 33 4M6 Cancel C If CMS cannot successfully connect to sites check the followings Confirm IP port username and password of the site You can connect to the site via IE browser to verify the site exists and is connectable e Close firewall and virus scan software and try to connect again If the problem is due to firewall or virus scan software please change their settings e lf the connection still failed please send the IP address to our engineer NOTE When you need to ask for the engineer s help please send a copy of the files stored in CMS Log as well 96 User s Manual The CMS server takes up too many HDD space We have found that the preset of the virus scan software NOD32 will automatically create a temporary file under windows system temporary folder when the CMS connects to sites This temporary file will automatically increase the size which causes the HDD became lack of space Please go to the control center of the NOD32 and disable IMON Then the problem should be resolved The following pictures are examples O NOD32 System Tools F x Help Hide Quit E Threat Protection Modules AMON DI DMHON EMON Control Center IMON 2 I
48. ll send an alive message to the CMS every N second just to show that the connection between the DVR and CMS is in effect The time interval N can be adjusted in lt Alive Interval gt lt Both gt This enables the DVR to send both Event and Alive alert messages to the CMS Alert IP The Alert IP must match the IP address of the local computer In this example the IP address of the local computer is 192 168 7 122 Alert Port The Alert Port is the port used for sending and receiving alert signals Choose any port that is not restricted by the network The ports for both connected DVR and the CMS Alert must be the same In this example the port is set to 9999 NOTE If 2 configuration sets are corresponding to 2 different CMS servers each CMS server must have its own unique port number User s Manual Alive Interval Time interval 1 to 255 sec between each alive message can be set here Step 3 Setup the Alert of the CMS Click on the lt Setting gt icon and go to Event tab to setup the port Port 9999 is used in this example Select ON to enable the alert function and click OK lt Event Full Screen gt is used to display full screen of the alerted channel Select lt ON gt to activate this function or lt OFF gt to deactivate it lt Event Recording Duration gt is for users to define recording duration of event videos when schedule is set and or when motion recording is enabled Settings Groups File path Event
49. n software 24 User s Manual Follow steps below to search for DVR s or IP Camera s Step 1 If there is a LAN network eg the CMS can search the IT Grigri Pe Sei ceee ais LAN network for IP address a amp c of available DVR s and IP Camera s Click the Search button on the bottom right to open the Search window ups T Vi g 01 New Group Step 2 Click lt Refresh gt to find the IP address of DVR s or IP SE Camera s available in the ams LAN network Select from the list and Double click on the IP address to add it to a site Then enter the username and password of the site NOTE The Device Search function can only be used to search for A addresses within the same LAN For example if the local computer uses an IP address of 192 168 1 5 and a connected DVR has an IP address of 192 168 1 7 the CMS will be able to find the IP address of the DVR However if there is another DVR connected to another LAN network such as 192 168 3 6 the CMS whose IP is 192 168 1 5 will not be able to find the IP address of the DVR in another LAN network Search UPnP devices Check the box in front of Search UPnP Devices and click lt Refresh gt to start searching for UPnP devices within the LAN While the search is in process lt Refresh gt button and Search UPnP Devices option will be grayed out and cannot be clicked or selected in addition the window cannot be closed lt Refresh gt butt
50. ndow 25 window 36 window 49 window and 64 window modes Refer to section Display Mode for more details on operation User s Manual Click on lt Sequence gt to start displaying the sequence list See Sequence Display section for more detailed information Click on lt Full Screen gt to extend the current viewing grids to full screen Hit lt Esc gt to exit Live Click on the lt Live gt icon to view the live video Note that after viewing recorded video this button needs to be clicked to switch back to the live mode Playback Click on the lt Playback gt icon to view recorded video stored in the HDD of the connected DVR Please refer to Playback Recorded Video section for more information about playing back the video CMS Player Click on the lt CMS Player gt icon to open the CMS Player The CMS Player is a compact version of the standard DVR Player Please refer to the Appendix A for more information Snapshot Click on the lt Snapshot gt icon to save a snapshot of the current window s Refer to section ake a Snapshot for detailed information Emap Click on the lt Emap gt icon to open the E Map program The E Map is a program that allows the user to illustrate the positions of the cameras on a self selected image Schedule Record Click on the lt Schedule Record gt icon to schedule the recording time frame for the sites Setting Click on the lt Setting gt icon to set up the configuration Refer t
51. nfernet Tron tor httpv u25 eset com nod_eval update ver x fet t 2070518 SE Monitor IMON enabled Siet Daa fod oat he sp t D lt r A E NOD 32 Help Hide antivirus system 97
52. o enter and edit the OSD setup menu of the Video Server Camera Click on lt Enter gt at center of the button to display the OSD setup menu on the camera screen Then click on the arrows to make selection and changes 7 16 Schedule Record Function User s Manual The user can schedule specific time to record the videos to the local computer The Schedule Record window will be displayed by clicking on the lt Schedule Record gt icon The current setting site will be shown on the top of the Schedule Record window Schedule Record Schedule Record Setting Holiday Setup 2008 12 26 bedule Record Function SELECT CELL 01 MegaPixelcamera ES Cam 1 A NOTE The lt EzRecord gt button helps users to quickly setup schedule in just one click Click on the lt EzRecord gt button and the schedule will be set to record all normal and event videos at all times T3 User s Manual The scroll down menu circled below shows the recording types Schedule Record Schedule Record Setting Holiday Setu Schedule Record Func tion 2008 12 26 Site 1 RECORD BY SITE 01 MegaPixelCamera ER Cam 1 OFF To turn off the schedule record function SCHEDULE WITH EVENT Schedule to record both the normal and event videos within the selected time frame SCHEDULE ONLY Schedule to record only the normal videos within the selected time frame EVEN
53. o section Configure the CMS for detailed information User s Manual Health Click on the lt Health gt icon to see the HDD information of the connected DVR s The data will be updated every 5 minutes The following figure is an example See Health Function section for more detailed information Health Status Refresh Rate 5 min Site 01 Internal External Total Size Active NonActive Maxtor 4R160L0 Internal 147GB Active 37 Site 02 Internal External Total Size Active NonActive Maxtor 4R160L0 Internal 147GB Active 36 Site 04 Device Name Internal External Total Size Active NonActive Temperature Maxtor 6Y080L0 Internal 71GB Active 50 Site 05 Device Name Internal External Total Size Active NonActive Maxtor 7 Y 250P0 Internal 228GB Active 42 A NOTE If more than half of the connected devices are not our products a warning message as below will be shown and the CMS will be closed automatically CMS Error Lock Click on the lt Lock gt icon to lock the CMS to protect the works on the CMS when the user needs to be away from the computer for a while This function is the same as the computer s screensaver See Lock Function section for more detailed information Site Tree Di RS the site s ug are etmenly being viewed If the connection to a certain camera is Dis Connect failed there will not be image displayed on its assigned grid Right click on the site and click Live lt
54. of items can be kept on the alert list is AN 1 000 When the list reached 1 000 items the earliest alert messages will be deleted while the new ones are being saved Double click on the Event Messages Alarm Motion or Video Loss to view the event video in full screen If the DVR sending the Event Messages is not currently connected to the CMS a message box will be displayed as the following Connect the DVR and the event video will be available CMS Error K Flease connect this site first A NOTE The Alert function works ONLY within LAN network Please refer to the note of the Search function NOTE If the alert event has not yet been added to the database of the DVR a warning message will be shown to notify the user User s Manual CMS User The lt CMS User gt is for the management of user accounts in the CMS You can set users account information and privileges The default username and password are Username admin Password 1234 Settings Groups File path Event OMS User Sequence Lagin Setting Network Lag User Information CMS User List User Name g min T See gt D1 admin Password l i User List A NOTE Only users under the lt Admin gt group have the privilege to change the settings in lt CMS User gt To add a user you must first add a group Right click on lt User List gt and select lt Add Group gt from the pull down menu Settings Groups File path
55. om In Out 3 Drag and drop channels or sites to the display grids 4 Remove any channel grids on the display windows A NOTE If you enabled the lt Event Full Screen gt and an event is triggered while running the sequence the CMS will display event full screen The sequence will not resume until event full screen ends Click on the lt Sequence gt icon or the lt Live gt icon to exit the sequence mode 53 User s Manual 7 6 54 Adjust the Image Both the CMS and the CMS player provide image adjustment function Double click on a channel then right click on it Select lt Image Adjustment gt from the pull down menu and the image adjustment window will be displayed You can change the brightness saturation hue and contrast of the channel Snapshot Image Adjustment The Following configurations are only applicable to CMS display and do not effect CMS recording data Resort remove Brightness Image Adjustment Saturation Hue Sound Notification On Ott Camera Info Camera covert On Off Motion Detection Object Search Contrast A NOTE The lt Image Adjustment gt option will only be available when viewing single channel screen Click the lt Default gt button to reset the value to the original preset A NOTE The lt Image Adjustment gt function has no effect on the recorded video Whatever changes made to the lt Image Adjustment gt will not be applied to the recorded video User s
56. on will be changed to lt Search UPnP gt to remind the user of the status Everything will work only after the searching process is done If the user double clicks on the list or tries to close the window a warning message will be shown 25 User s Manual 6 2 3 Setup the DVR Site Manually If the detailed information IP address port username and password of the connected DVR is provided a site can be setup manually Add a new site and enter the Name IP address Port Username and Password Select DVR and click lt OK gt to complete the setting Settings Groups File path Event CMS User Sequence Login Setting Network Log Groups m ite Setting Site Mew Site Groups IP 192 168 7 110 01 New Group 01 New Site Port a Username ein Password Rs Ce DVR 7 IP Camera WONS Model Stream Type 7 Search Export Import Cancel NOTE If the entered Username and Password is a user account A instead of an administrator account the same DVR account restriction will be applied When a user account accessed a function that is restricted the following message will be shown User s Manual If the DDNS information of the DVR is known the DDNS data can be used to setup a site Check the box lt D DNS gt circled below and type in the DDNS data Click lt OK gt to complete the setting An example of the DDNS address looks like ddns iview ddns
57. or message will be displayed Note that if a HDD with less than 1GB capacity is selected an error message will be shown Click on lt Clear All gt will delete all folders except the first preset folder 29 User s Manual 30 In each folder subfolders will automatically be created with folder name RecordFolder which represents an 8 digit serial number Each subfolder can stores up to 500 videos Once a subfolder is full a new subfolder with a subsequent number will be created and new files will be stored to the new subfolder Circular Function The lt Circular gt function is used to adjust the HDD space usage of the CMS For example when the threshold is set to 1GB and there are 20GB free disk Space remaining in the HDD CMS can only access the HDD no more than 19GB When the free disk size is smaller than threshold 1 If the circulation of files is performed at first time CMS will start to overwrite the earliest recoded data Next time when CMS starts up the circulation of files will continue from where it was up to 2 If the destination folders are reset new files will be stored to the first folder If the first folder contains DRV files all old files will be rewritten with new files until the folder is full Record Videos from IP Cameras to Remote Network Disks When videos from IP cameras will be recorded to a remote network disk the DRV file is going to be stored under a temporary folder
58. owing example Drag and drop a channel from the site tree to any desired position of the image Es UTPDHO6O Es UTPDHO6O Es UTPDHO6O Es UTPDHO6O DH500 Es DH701 DH500e DH70le Right click on a camera icon can remove it or rotate its pointing direction including North Remove Northeast East Southeast South Southwest kolale West and Northwest 83 User s Manual Step 6 When the mouse pointer moves over a camera icon in the image an 84 information dialog box will be displayed as below picture marked 1 T GROUP 01 New Group SITE 01 1 Ch IP_Ch1 IP 192 168 1 242 GROUP 01 New Group Wee SITE 01 1 Ch IP_Ch1 IP 192 168 1 242 PORT 80 Double click on any camera will display the live preview image of the camera When a camera icon is clicked the camera live preview window will be highlighted if its been displayed as above picture marked 2 Otherwise the corresponding channel in the site tree will be highlighted as shown in below picture Camera Image Camera Image WI A NOTE The camera live preview window is limited up to three instances at the same time User s Manual Step 7 Right click on the camera preview window to display the camera control menu The menu items includes Snapshot Talk On Off Dome Setting Dome Control Sound Notification On Off and Camera Info Camera Icons There are three different types of camera
59. oxes will mark the lost of objects Stop Simulation Click on it to stop simulation Live Click on it to restore the Video Preview frame to live image Lost of Object Alerts When lost of object alerts are detected restore the object detected search window and the list on the left hand side will show area number and time of the lost of object alerts If the connected site is a DVR double click on any item to playback video that is 15 seconds before the alert triggered However if the video is not added to the database yet an error message will be displayed NOTE Only the configuration of area positions sensitivity and interval will be permanently saved The default image will be replaced by the initial image every time when the CMS restarts Therefore please check the configuration every time the CMS starts up AN NOTE The CMS Player also has object search function and it is slightly different from what s in the CMS Refer to the appendix A for more details Click on lt OK gt to apply the settings or click on lt Cancel gt to disregard and return to Live mode The selected boxes will not be shown on the live monitoring screen AN NOTE The Motion Detection function and Object Search function can be enabled simultaneously 67 User s Manual 7 13 68 Take a Snapshot The Snapshot function is a simple screen capture tool When you click on the lt Snapshot gt icon it will capture the screen
60. path Event CMS User Sequence Login Setting Network Log f Sequence Order Sequence Setup Sequence Dwell ec Mo SITE CAMERA 8 stet camerali i Split Mode E Export Import Click lt Clear Sequence List gt to empty the list A message window will be shown for confirmation 39 40 User s Manual 6 7 Login Setting The user can edit options regarding login settings in this section Administrator username and password is required to edit the setting Settings Groups File path Event CMS User Sequence Login Setting Network Log Settings i Auto Login i Auto retrieve Live image Wen Logi Export Import Cancel As shown in the above picture the box marked 1 is where the user can enter a set of username and password to be used for auto login The Verify button can help the user to check if the username and password are correct The following messages boxes will show to inform the result of verification Correct Wrong J Wrong Username and Password User s Manual The box marked 2 contains the options regarding automatic actions Clicking the first option Start CMS when start Windows to request the computer to open CMS in the mean time when the system startup Note that the other two options Auto Login and Auto retrieve Live image When Login will be checked at the same time Nonetheless it is still the user s choice to de
61. ror message will be displayed as below CHS Error NOTE A release note will also be downloaded together with the AN setup file The following message will be displayed to show the file path where the release note is saved A Path of release note Ci Program Fest MS Eibelease Note Ta 4 1 User s Manual Start the CMS There are 3 ways to start the CMS Note that method A and B are only available if the Start Menu Shortcuts component is installed Please see section Software Installation for more information Method A Click Start menu and select Programs find CMS from the listed programs Method B Double click on the shortcut icon on the desktop Method C Go to CMS EXE and double click on the CMS icon Starting Up If the CMS is started for the first time select a desired language for the interface The available languages are listed in the scroll box Click lt OK gt to confirm the selection Select Language English MM If the system memory or CPU frequency is less than the requirement the error message shown as below will be displayed The following message will be shown if the setting file is blank or broken CMS Message The setting file of CMS is blank or broken The default setting will be loaded User s Manual 4 2 Login The default User Name amp Password are listed below User Name admin Password 1234 La User Name ech HEE EE Fassword
62. s Layout file the following Select from preview dialog Choose this option and the picture as below will be shown When the mouse pointed to any item the preview display will be shown on the right Double click on any item to display it on the viewing area A KE d Select from page number Choose this option and the picture as on the right will be shown Select any page number to display the chosen page on the viewing area Since the maximum channel connection is 512ch the choices of page number for 2 2 will be from 1 to 128 A control icon lt X gt is provided to exit without selection 51 User s Manual 1 4 52 Zoom In Out Control via Mouse Both in CMS and CMS Player zoom in out can be easily control via mouse scroll wheel Either in CMS or CMS Player click on any grid that you wish to zoom in viewing area Move the scroll wheel away from you to zoom in and the screen will show like the following picture iser Ch FOIZI 16 08 27 Zoom XD On the upper left hand corner will show zoom in multiple The maximum multiple is X7 Also on the lower right hand corner will show the position of current viewing area shown as an inner white rectangle comparing with the original screen shown as an outer rectangle frame In addition the viewing area can be dragged and moved by left clicking and holding the mouse while moving On a zoomed in screen the mouse pointer will change to and when the mouse is cli
63. s are for backup or other users use Once the file name is entered and clicked lt Save gt the new layout file will be shown on the file list Select a layout file from the list and click lt Delete gt to delete the file or press the Delete key on the keyboard can also delete the selected file A message will be shown to confirm the deletion To load a layout file select a file and click lt Load gt or double click on the file Show Covert Camera Images When a camera ts set to covert at DVR site an icon C will be shown at bottom left of the grid Right click on the grid to set the camera to be covert or not at CMS site The preset is set to covert Snapshot Ee sort This function is only available when CMS is Remove logged in using accounts under admin group Sound Notification OnOff Camera Info Camera covert On Off Motion Detection Object Search 7 2 Camera Setting Camera Info Configure Camera Setting Camera setting can be configured by right clicking on a site and select lt Camera Setting gt Camera viewing setting enables the user to set the display of Site Name Channel Name or Time on the top left corner of the image User s Manual FeConnect LisConnect Live Record Configuration Playback d Camera Setting Camera sound notification enables preset sound file to be played when an alert event occurs It can be set via Site Base or Channel Base Setting via
64. shot of the window that you are currently viewing You can save the screenshots to the default path CMS Snapshot or the folder that you have previously set in the file path Please refer to lt Setup the File Path gt for more information about changing the file paths There are 2 ways to take the snapshot One is to click on the lt Snapshot gt icon and the snapshot window will be displayed Select lt OK gt to save the file as The other way is to right click on the window and select lt Snapshot gt Note that it will only capture the image of the selected channel The file will be saved without displaying the image A NOTE The default image format is jpg If you have selected more Dan one file types and took the snapshot you will get more than one files of the same snapshot image Please go to lt Settings gt to setup the snapshot file type Settings OP gg Groups File path Event l CMS User Sequence Login Setting d Network I Log Path Circular Snapshot path C Program Files CMS Snapshot Enable ON Type By size v Archive path C Program Files CMS Archive Se Browse l 1000 MB L j Snapshot type Record path Bmp Gif egen Fes CMS Record I LI Tif Jpg 7 13 User s Manual 2 Way Audio Talk 2 way audio talk function enables the user to communicate with the camera side Currently the only supported camera types are NH Series IP Camera and Video Server
65. site tree to any grid of the CMS main window Follow steps below to complete assignment Step 1 Click and hold the channel site you want Step 2 Drag and drop it onto the window that you want to assign in Resort Remove Display Window Grids Right click on any channel and select lt Re sort gt to rearrange camera images of connected sites in order up to 512 channels Alternatively you can also remove any channel by right clicking on the grid and select lt Remove gt Or you can select any grid and press lt Delete gt key on the keyboard to remove the channel Note that clicking lt Re sort gt will restore the removed channels or you can add the channels back to any grid via drag and drop Snapshot Ee sort Remove Sound Notification Oniot Camera Info Camera covert On Off Motion Detection Object Search AN NOTE These functions will not be accessible in sequence mode 47 User s Manual 48 save Layout Files The layout arrangement can be individually memorized for each connect group Also the CMS will keep the layout arrangement when it s closed and restore the same layout when it s opened again Each login account can save it s own layout files Right click on any mode icons and the pull down menu will be shown as on the right After selected lt Layout file gt the setting window will be displayed as below Select from preview dialog Select from page number The layout file
66. t the setting files back to CMS servers 1 4 1 2 User s Manual Supported IP Cameras The following chart shows the models of IP cameras recognized by the CMS MS ADPCM 2 Way Audio RTP RTSP g 11 a law g 711 u law MPEG4 MJPEG Intranet 2 Way Audio RTP_Over RTSP MPEG4 MJPEG g 11 a law g 711 u law Internet Adpcm g 711 a law HTTP MJPEG H264 g 11 u law RTP RISP MJPEG H264 g 11 a law g 711 u law RTP RTSP MPEG4 Unsupported RTP RTSP MPEG4 Unsupported AN NOTE Each group can only connect to at most 16 IP cameras HTTP MPEG4 MJPEG User s Manual 2 Software Installation After acquired the installation file follow the steps below to install the CMS to the local computer Step 1 Double click the zipped file to unzip it SS CMS zip Step 2 There are 3 ways to start the installation Option 1 After the zip file is opened click Setup exe on the Setup exe file to start the installation Option 2 After the zip file is opened click JAutoRunexe on the AutoRun exe file to start the installation Option 3 If the program will be installed using the CD the installation will run automatically when the CD is inserted into the CD Rom If the installation will be started either via Option 2 or Option 3 of Step 2 the lt CMS Setup Menu gt window will be displayed Choose lt INSTALL CMS gt to start installing the CMS Choose lt CMS USER S MANUAL gt to open the user s manual Choose
67. tabase Setup Version Model Name PDG Language Date Time Hardware 32 01 45 Unit Name Network Setup Software 001 1 0202 0380 0200 RA Setup Audio Output Key E 61 User s Manual OSD Menu of a IP Camera Please refer to the IP Camera User s Manual for detail instruction Config Menu PCam SITE 3 System Security Network DONS Mail FTF Streaming Camera Application Motion Detection viei Host Name rer Sync With PC Time 00 ams MegaPixelCamera Use Manual Time OSD Menu of a Video Server Please refer to the Video Server User s Manual for detail instruction Contig Menu SITE 2 Admin Setup Time Setup Network Setup Video Setup Motion Detection Alarm Setup Dome Setup Systemi Hostname VideoSeryver Domain D521 User Management 62 7 9 Search for Event Videos The CMS is capable of searching playing back and archiving the event videos Right click on the Site and select lt Event Search gt and the lt Event Search gt window will be displayed User s Manual Ee Connect DisConnect Live Record Configuration Playback Camera Setting You can search the event list of the connected DVR If you have installed the POS module you can either search by event or text To play the event video Select Play Event and double click on any item to view the playback of the event Event Search
68. termine the favorite setting The following message will be shown when the CMS is auto opening after the system started up Click Cancel can terminate opening the CMS CMS Auto Open Click the second option Auto Login to automatically login when the CMS starts Remember to enter and verify username and password in box 1 Click the third option Auto retrieve Live image When Login to automatically connect to the sites in the start group when the CMS starts Detection of internet connection will be performed before hand and the following message will be displayed Click lt Stop gt to terminate the detection and AutoLive will not be initiated Detect Internet connect state before AutoLive 41 User s Manual 6 8 42 Network Setting The CMS provides the option of connection via proxy server for Optiview DVRs Click lt Network gt tab and the setting items are shown below Settings Lotroups File path Event CMS User Sequence Login Setting Network Log Proxy Server if Use a proxy server for your CMS connection Address 192 lba JD edo Proxy Authentication Wsername user Password E w Bypass proxy for local address Export Import Cancel lf you wish to create the connection via a proxy server check the box Use a proxy server for your CMS connection Then enter the IP address and port of the proxy server Enter username and password if authentication is required
69. the CMS There can be at most 4 CMS instances opened simultaneously If the PC is connected to more than one monitor for example 4 then the PC can open up to 4 CMS instances at the same time on the 4 monitors respectively However the processor and RAM of the PC will limit the number of CMS instances as well Note that all monitors have to be set to the same resolution CMS multiple instances limitation according to the PC Frequency gt 2 0GHz RAM 2 1GB Open up to 2 CMS RAM 2 1 5GB Open up to 3 CMS RAM 2 2GB Open up to 4 CMS Single Core and RAM 2 512MB Open 1 CMS Frequency lt 2 0GHz A NOTE It is recommended to keep the connected channels within 512 channels if multiple CMS instances are opened Network Connection Detection CMS will auto detect network connection status If CMS lost network connection the following error message will be displayed Disconnected from network Live images will be automatically retrieved when network connection is restored When CMS detected the restore of network connection the error message will disappear Click on lt Stop gt to cancel this function 45 User s Manual L i 46 View Live Image Assign Camera The user can view live video or connect to the connected DVR using the live button Click on the lt Live gt button to see the live view Connect Reconnect Disconnect the Sites If the connection between the CMS and the connected DVR has been interrupted you
70. the CMSPlayer exe an error message will pop up 57 User s Manual Convert drv files to avi files Click on the lt Open Video File gt icon to open the video file and the Select a folder window will be displayed On the top center of this window select lt Convert To AVI gt and double click on the file you wish to convert A conversion list window will pop up and the file will be added to the list The other way to add files to the list is to right click on the file and select lt Add To 58 List gt or lt Add All To List gt Select a folder Folder Yiew Double Click to Choose cy 43 CMS Archive Avi Config EXE Log 43 Record RecordFolder00000001 S RecordFolder00000002 RecordFolder00000003 Setting Betting Betting Setting4 SkinChange Snapshot amp SPL TEMP_REC TEMP_REC2 DRY File Infomation Double Click to add the DRY file to convert list Play DRY File Now Choose Convert To AVI C Program Files CMS Record RecordFolder00000002 DRY File Name Start Time End Time Type CH CMSO1 Rec Group01 S 2008 09 23 19 25 53 2008 09 23 19 26 27 Normal All CH Add All To List Conversion List 1 IF the time interval of a DRY file is less than three seconds CMS player will not be able to successfully convert this file 2 Please download and install the codec from http www Filehippo com download_klite_codec_pack 372
71. three seconds CMS player will not be able status column will show Break to successfully convert this file Off for the specific file aborted 2 Please download and install the codec From http www Filehippo com download_klite_codec_pack 3723 If the file failed to be converted the status column will show STEE Seen ct 15 C Program Files CMS Record RecordFolder00000002 CMS01_R Done Fa C Program Files CMS Record RecordFolder00000001 CMS01_R Break OFF Convert If the conversion is completed the message as Paksa Imei EM on the right will be displayed The converted D files will be stored in the folder specified in file b EE path setting of the CMS Player For more information about other CMS Player operations please refer to the Appendix A 59 User s Manual Install required codec to playback converted AVI files In order to correctly playback converted AVI files install K Lite Codec Pack and select codec options as described below 1 Check lt Mu law A law gt amp lt MS ADPCM gt under lt Other audio formats ffdshow gt en Setup K Lite Codec Pack Select Components Which components should be installed Select the components you want to install clear the components you do not want to Install Click Hest when You are ready to continue Other audio formats ffdshow AMA IMA ADPCM ODMZ MACE IMC MS GSM Trespeech True Audio Nellyrnoser Mu law A lav
72. tification W Show Site Mame Site Base M Sound Notification enabled For All Channel F k Show Time Filename de may Load en w Show Channel Name Quick Hot Key 1 Click a channel grid and press the following keys Ctrl Alt n Sound Notification ON for all sites Ctrl Alt f Sound Notification OFF for all sites 2 Click a site in the Site Tree and press the following keys Ctrl Alt n Sound Notification ON for the selected sites Ctrl Alt f Sound Notification OFF for the selected sites View Camera Info The Camera Info can be viewed both in CMS and CMS Player Right click on any channel grid and select lt Camera Info gt from the pull down menu to view the information Refer to the following for examples Camera Info of CMS Camera Info of CMS Player Camera Info Ki Camera Info Site Mame Device DYR Channel Name Ch IF 202 166 200 162 Frame Hate 1 SERIES i Video Size 1280 x 940 Video Size 1260 e 960 Formac MJPEG Format MIPEG Device DYR Stream Type HTTP STREAM 7 3 User s Manual Display Mode The available display modes are single channel 2 2 3 3 4 4 5 5 6 6 7 7 and 8 8 To view in single channel double click it in the site tree or on the grid To view in multiple window mode right click on Select from preview dialog the desired icon and a menu will be display as Select from page number on the right The selections are described a
73. uttons the other way is to right click on the group and select lt Expand gt or lt Collapse gt from the pull down menu Settings Groups File path Event CMS User Sequence Login Setting Metwork Log ear _ Site Setting l Site rit SE Ip 01 ats 01 New Add 3 site 4B 02 New Gre Remove 01 New Rename Collapse Set as start roup Export Import Remove a Group To remove a group click on the group to be removed and then click the E button directly to remove the group The other way to remove a group is to choose lt Remove gt after right clicked the group Settings Groups File path Event CMS User Sequence Login Setting Network Log gt Groups m ite Setting Boua Qlal Site 4B Groups 01 New Group 01 New Site 02 New Group 0l New sit Adda site Rename Expand Collapse set as start roup Export Import 22 User s Manual 6 2 Manage the Sites The following sections are instruction of the management of the sites including add or remove sites and configuration 6 2 1 Add Remove a Site This section describes how to add or remove a site Up to 10 groups can be created with a capacity of 64 sites Add a site Choose a group to add a new site Click the button to add a site to this group The next section will show how to setup the site step by step Settings Groups File path Event CMS User Sequ
74. very 30 seconds If file circular is enabled the circulation will as well be updated every 30 seconds Configure the CMS User s Manual The CMS supports up to 10 groups and at most 64 sites can be added to each group The following sections guide you to setup your CMS step by step Click on the lt Setting gt icon and the figure below will be displayed Settings Groups File path Event CMS User Sequence Login Setting Network Log Groups Site Setting Gelee ole Groups amp 01 New Group 01 New Site Username Password DVR IP Camera Model Stream Type Export Import NOTE The configuration in Group tab and Import function will be unable to be saved when the CMS is detecting network connection or is connecting to some sites Error messages will be shown to inform the users User s Manual 6 1 Setup Groups Up to 10 groups can be set in the CMS This section guides the user to add or remove a group and also shows the user how to set start group Add a group Click e button to add a group Double click on the group to rename it Settings Groups File path Event CMS User Sequence Login Setting Network Log gt Groups 8 Groupes H A 01 New Group 01 New Site Export Import elele ae m ite Setting Site Ip WENS Fort Username Password Ce DVR IP Camera Mo
75. y MS ADPCM E DirectShow audio parsers Current s lection requires at least 37 9 MB of disk space 2 Check lt Microsoft gt for lt AVI splitter gt under lt DirectShow source filters gt ei Setup K Lite Codec Pack mea Select Components Which components should be installed Select the components you want to install clear the components you do not want to Install Click Hest when you are ready to continue E CirectShow source filters AWI splitter Lo Microsoft O Gabest MP4 splitter Go Haali Gabest Current selection requires at least 37 5 MB of disk space 60 7 8 User s Manual Configure the OSD Menu of the Connected Site The OSD menu of the connected site contains a list of items that are used to configure the connected site Right click on the Site and select lt Configuration gt to open the OSD menu When the mouse did not click or the keyboard did not type for 5 minutes the configuration window will be closed automatically ReLonnect LisConnect Live Record Configuration Event Search Playback Camera Setting The OSD menus for DVR IP camera and Video Server are different from each other Refer to the following for examples OSD Menu of a DVR The Menu function is similar to the DVRRemote Software Please refer to the DVR User s Manual for detail instruction Contig Menu DVR SITE 4 System Setup Camera Setup Record Setup Event Setup Da
76. yer When multiple CMS instances are opened in multiple monitors each CMS can launch 1 CMS Player The main window of the CMS Player is shown below with the name of the buttons CMS Player x CMSPlayer Asiers 2 Speedindcator SSSOSCS S S S s Stetee Ange 5 Display Modes 2X2 3X3 4X4 and FULLSCREEN D Open Video File Frame View Setting File Path Setting and Snapshot Playback Controls Fast Step Backward Play Pause and Fast Step Forward The usage and function of each button will be described in the following paragraphs 90 User s Manual Open Video File Click on the lt Open Video File gt icon to open video files To open a file you need to find the folder containing DRV files from box 1 After the folder is found select lt Play DRV File gt of box 2 Lastly double click on a file in box 3 and the file will be played If you want to convert the drv file to avi format click on lt Convert To AVI gt underneath box 2 instead and double click the file in box 3 For more detail about converting DRV files to AVI files refer to section Playback Recorded Video Select a folder 1 Folder View Double Click to Choose DRY File Infomation Double Click to Play DRY file Now Choose C Program Files CMS Record RecordFolder00000001 GA CMS Archive Avi Con

Download Pdf Manuals

image

Related Search

Related Contents

Boss Audio Systems CPBK2 capacitor  Robust installation projector for demanding environments  instruction BooKlet/ mode d`emploi  Refrigerator - Amazon Web Services  取扱説明書  Samsung AW09PKB manual de utilizador  Hot Coils Owners Manual – English  1.3 Résistances 1 Introduction 2 Théorie    

Copyright © All rights reserved.
Failed to retrieve file