CAT-40G - Labelmate USA
Contents
1. Use of the External Halt Control circuit is optional With No Connection nothing plugged into the External Halt Control Jack the Rewinder will function as described above With Pin 2 and Pin 3 of the External Halt Control circuit closed connected together using a 3 5 mm dual circuit plug the CAT 40G will operate When the External Circuit is opened the CAT 40G will stop 3 5mm Dual Circuit Plug Contact CLOSED RUN Contact OPEN HALT Pin 1 No connection NOT USED Pin 2 Normally Closed NC contact Pin 3 Normally Closed NC contact return 12V EXT HALT CONT S4gK 1 3 5 mm Jack E Ee tf S Dual Circuit 10K MAINTENANCE Your CAT 40G Rewinder requires no periodic or preventative maintenance2. no event shall Labelmate USA have any obligation to repair or replace until the customer returns the defective product to Labelmate USA The customer assumes any and all responsibility and liability associated with transportation of products for service under this Warranty WARRANTY PERIOD PRODUCTS COVERED Switched Dual Torque Range CAT and Mini CAT Label Rewinders and Direction Controls 5 Years UCAT Label Unwind abel Unwinders Constant Adjustable Torque Label Counters Excluding Counter Displays and Encoders CAT technology Label Dispensers Excluding Counter Displays Label Slitters Mechanical Parts Only and excluding Counter Adjustable Speed Control up to 3 Years Displays 30 760 mm per second Reel to Reel Machines Excluding Counter Displays and En coders Print Mechanisms Excluding Counter Displays and Encoders Quick Chucks Power Supplies AC DC Adaptors and Transformers CAT 40G S A Counter Displays Encoders Any other products or parts not specified herein Remove all parts from the shipping container and verify contents 180 Days Out of Warranty Repairs Package Contents In the event your product requires service or you have questions regarding Warranty coverage please call toll free 877 833 7149 inside the United States or 1 702 435 8535 outside the United States e User Manual this document e CAT 40G Drive Unit LABELMATE MAKES NO OTHER WARRANTY OF ANY KIND WHETHER EXPRESS OR IM
3. PLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY SATISFACTORY QUALITY AND OR e Power Supply Module FITNESS FOR A PARTICULAR PURPOSE NO OTHER PERSON AGENT DEALER OR RESELLER IS i aes l AUTHORIZED TO GIVE ANY WARRANTIES ON BEHALF OF LABELMATE ANY OBLIGATION TO e LABELMATE Quick Chuck Quick Locking Core Chuck WARRANTY OTHER THAN THAT SPECIFICALLY ADDRESSED HEREIN IS EXPRESSLY DISCLAIMED e Allen Wrench Precise Variable Torque Control 1 Year e Plastic Flange Plates LABELMATE USA uc 12A Sunset Way Henderson NV 89014 USA Retain the Shipping Container and Packaging for Storage and Transport 702 435 8535 FAX 702 435 8536 Toll Free 877 833 7149 in USA e KEEP MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE e support labelmateusa com www l abelmateusa com WARNING This product is for indoor use only Not for use in wet locations Unplug unit before removing waste material or performing any cleaning or maintenance services k SET UP 1 8 Mount the 400 mm 16 diameter Flange Plate onto the Quick Chuck Core Holder using the screws provided Slide the Quick Chuck and Flange Assembly onto the CAT 40G Motor Shaft allowing for clearance to the Chassis and Motor Screws Tighten the Allen screw to secure the Quick Chuck and Flange Assembly onto the Motor Set the CAT 40G in place near the label exit slot of the printer CAUTION AVOID ACCIDENTS THE CAT 40G WEIGHS APP
4. Product Limited Warranty ne X NPP Labelmate USA warrants to the original end user customer that Labelmate USA products will be free from LAB Ln N AATE U SA Lic defects in materials and workmanship for the duration described herein below Labelmate USA s Limited Warranty covers only those defects that arise as a result of normal use of the products and does not cover any other problems including those that arise as a result of i improper maintenance or modification ii parts or supplies not provided or supported by Labelmate USA iii operation outside the products specifications or iv unauthorized repair modification or misuse Use of any unauthorized accessory or a attachment will void coverage The Warranty period for all products commences the date of shipment from Labelmate USA and accrues to the original end user customer Warranty coverage is non transferable and terminates immediately upon e rental resale or any other change in ownership Original purchase documentation should be retained for 400 mm 16 High Torque Gear Driven Warranty coverage verification e In the event Labelmate USA substantiates during the applicable Warranty period a defect in any product On Demand Label Rewinder which is covered by Labelmate USA s Warranty Labelmate USA shall repair or replace the product at Labelmate USA s option Labelmate USA retains sole discretion to determine whether or not a product is defective In
5. ROXIMATELY 30 POUNDS 13 6 KG SO CHOOSE ONLY A STURDY SURFACE ON WHICH TO SET THE UNIT The CAT 40G is bi directional It can rewind labels in either direction Verify that the DIRECTION Switch on the CAT 40G Control Panel is in the OFF position Plug the Power Plug at the end of the wire on the AC Wall Transformer into the CAT 40G Power Input Jack Plug the AC Transformer into an appropriate AC power outlet The unit is now ready for use POWER REWINDING Place the DIRECTION Switch on the CAT 40G Control Panel in the center OFF position Slide an empty label core onto the CAT 40G Quick Chuck Feed the label web from the printer under the Sensor Arm onto the rewind core and secure it with a piece of tape 4 Place the DIRECTION switch in the desired position to rewind the labels 5 Advance the TORQUE Control about 1 3 rotation from fully CCW as an initial setting 6 Start your printer and observe how the labels are being rewound 7 Adjust the TORQUE Control as needed to provide more or less rewind force The CAT 40G s amplified torque motor will provide a nearly constant rewind speed as the roll diameter grows If necessary adjust the rewind TORQUE setting EXTERNAL HALT CONTROL The External Halt Control jack on the CAT 40G is for use with external devices capable of providing an open circuit halt command A 3 5 mm control cable is necessary for use not included
Download Pdf Manuals
Related Search