RP-701/RP-901/RP-902/RP-903 User`s Manual
Contents
1. transmission RP 701 RP 903 More than 99 0 RP 901 RP 902 More than 95 0 Dimension Weight RP 701 379 6 mm W x 304 5 mm H x 1 0 mm D Approx 140 g RP 901 341 5 mm W x 425 7 mm H x 1 5 mm D Approx 290 g RP 902 435 6 mm W x 328 0 mm H x 1 2 mm D Approx 210 g RP 903 329 0 mm W x 437 1 mm H x 1 2 mm D Approx 210 g Lever for Panel Protector Gloves Cleaning Cloth User s Manual Masking tape 4 pieces 2 sets Copyright 2012 EIZO NANAO CORPORATION All rights reserved OONOL756A1 U M RP701 AL2. User s Manual WE 2Z0 RP 701 RP 901 RP 902 RP 903 Panel Protector for EIZO 48 cm 19 0 inch 54 cm 21 3 inch class LCD Monitors e Surface of the panel protector catches the dirt dust or finger prints easily Please use the enclosed gloves while installing and removing the panel protector e Please use the supplied masking tape and be careful not to scratch the LCD panel or the cabinet with the panel protector during installation Also please do not remove the panel protector often It may scratch or result in damage to the LCD panel e When using LCD monitor with optional panel protector it is preferable to avoid using downwards In this condition the panel protector might become bend or slip out from the monitor e Attaching a panel protector to the monitor with an Integrated Front Sensor slide type disables an Integrated Front Sensor slide type The settings for the monitor and RadiCS RadiCS LE need to be changed Refer to each User s Manual for details Installation Before installation please remove dust and stains from the LCD panel Separator Tape blue 1 Strip the tape from the separator and adhere it on each edge of the cabinet on the right and left With RP 901 RP 903 adhere the tape on long sides of the cabinet with RP 701 RP 902 adhere the tape on short sides of the cabinet 2 Set the panel protector into the grooves of the panel frame the lower first 1 then the upper 2 3 Wit
3. h the enclosed tool Lever set the tabs of the panel protector into the side grooves 4 tabs 6 tabs Put the lever on the tabs of the panel protector and move it toward the LCD panel to install Position the protector into the LCD panel tightly without leaving an opening 4 Strip the tape from the cabinet Removing Put the lever on the tabs of panel protector and move it toward the cabinet to remove Cleaning e Please be sure to keep the panel protector immobilized while cleaning it Otherwise it may scratch the surface of the LCD panel To hold the panel protector by hand use gloves or a soft cloth to avoid dust or finger prints e Chemicals such as alcohol and antiseptic solution may cause gloss variation tarnishing and fading of the cabinet or panel and also quality deterioration of the image e Never use any solvents or chemicals such as thinner benzene wax and abrasive cleaner which may damage the cabinet or panel This product comes with a special cleaning cloth designed to remove stains from the panel If necessary stubborn stains can be removed by moistening part of the cloth with water to enhance its cleaning power It is recommended to use EIZO cleaning kit ScreenCleaner option to clean the panel Specification Surface treatment Anti Reflective Coating Both sides Coating strength RP 701 RP 903 5H RP 901 RP 902 4H Reflectivity RP 701 RP 903 Less than 1 0 RP 901 RP 902 Less than 0 8 Light
Download Pdf Manuals
Related Search