Home

User`s manual - VTech Communications

image

Contents

1. n rer en incendies ou en risques d lectrocution Ne renversez jamais de liquide dans ce produit 6 Afin de r duire les risques d lectrocution ne d montez pas cet appareil mais apportez le dans un centre de service autoris Louverture du boitier ou le retrait de toutes pi ces que contient cet appareil a l exception de l acc s autoris a certaines portes ou ouvertures risque de vous exposer a des points de tension dangereux ou d autres dangers Un remontage incorrect peut par la suite pr senter des risques d lectrocution 7 Examinez les composantes afin de v rifier si celles ci ne sont pas endommag es 8 Les enfants devraient tre supervis s afin de vous assurer qu ils ne jouent pas avec l appareil 9 Le produit n est pas con u pour tre utilis par des personnes incluant des enfants aux capacit s physiques sensorielles ou mentales r duites ou qui manquent d exp rience et de connaissances a moins qu on leur ait donn suffisamment de supervision ou d instructions relativement a l utilisation de l appareil par une personne responsable de leur s curit CONSERVEZ CES INSTRUCTIONS Pile e MISE EN GARDE Il peut y avoir un risque d explosion si vous utilisez le mauvais type de piles pour l unit du capteur e Ne jetez pas la pile au feu V rifiez les instructions sp cifiques de mise aux rebus aupr s des autorit s locales e N ouvrez pas et ne mutilez pas la pile L
2. 8 Charges for installation or set up adjustment of customer controls and installation or repair of systems outside the unit How do you get warranty service To obtain warranty service in the USA please visit our website at www vtechphones com or call 1 844 848 8324 1 844 84 VTECH In Canada visit at www vtechcanada com or call 1 800 267 7377 NOTE Before calling for service please review the user s manual a check of the Product s controls and features may save you a service call Except as provided by applicable law you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product s to the service location VTech will return repaired or replaced Product under this limited warranty Transportation delivery or handling charges are prepaid VTech assumes no risk for damage or loss of the Product in transit If the Product failure is not covered by this limited warranty or proof of purchase does not meet the terms of this limited warranty VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty What must you return with the Product to get warranty service 1 Return the entire original package and contents including the Product
3. e Flashes red once when a motion is He detected Flashes green when the sensor is in the registration mode Mounting bracket 4 Motion detector on mounting base Double sided mounting tape Anchor for back cover x 3 with screw 5 PAIRING button e Press and hold to enter the j User s registration mode f I manual 4 6 Battery compartment case Screw for Anchor for User s manual mounting mounting brackets x 2 brackets x 2 Before use Install battery to the motion sensor 1 Flip the ribbon across the battery compartment 2 Insert the battery into the battery compartment When the registration process completes the green LED light on the sensor will remain steady for about two seconds and then turn off The registration process takes about 90 seconds to complete JO NOTES e If the registration fails take out the battery and place it aside for a minute to reset the sensor Then install the battery back and try the registration process again f9 NOTES e Use only CR123A lithium battery e While you insert the battery make sure the polarities are correct e The battery operate properly under the temperature between 0 F 18 C and 120 F 49 C Replacing a sensor If you have purchased this new VC7003 accessory sensor to replace an old sensor follow the instructions to deregister your old sensor To replace a sensor you must deregister the registered sensor first and
4. to lost profits or revenue inability to use the Product or other associated equipment the cost of substitute equipment and claims by third parties resulting from the use of this Product Some states provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you Please retain your original sales receipt as proof of purchase Technical specifications Crystal controlled PLL synthesizer Transmit frequency 1921 536 1928 448 MHz Channels 5 0 F 18 C to 120 F 49 C Frequency control Sensor operating temperature Nominal effective Maximum power allowed range by FCC and IC Actual operating range may vary according to environment conditions at the time of use Power requirements Battery Lithium 3V Battery type CR123A Battery size 2 3A This product is not designed for security purposes The user of this product is hereby informed that this product when properly installed and maintained may in some cases reduce the risk of burglary fire robbery or other events occurring without providing an alarm but it is not insurance and it is not a guarantee that such losses will not occur and it is not a guarantee that there will be no personal injury or property loss or damage incurred by the user The user of this product should not rely on this product as a security measure for prevention of accident burglary robbery or fire Ever
5. to the VTech service location along with a description of the malfunction or difficulty and 2 Include a valid proof of purchase sales receipt identifying the Product purchased Product model and the date of purchase or receipt and 3 Provide your name complete and correct mailing address and telephone number Other limitations This warranty is the complete and exclusive agreement between you and VTech It supersedes all other written or oral communications related to this Product VTech provides no other warranties for this Product The warranty exclusively describes all of VTech s responsibilities regarding the Product There are no other express warranties No one is authorized to make modifications to this limited warranty and you should not rely on any such modification State Provincial Law Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province Limitations Implied warranties including those of fitness for a particular purpose and merchantability an unwritten warranty that the Product is fit for ordinary use are limited to one year from the date of purchase Some states provinces do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you In no event shall VTech be liable for any indirect special incidental consequential or similar damages including but not limited
6. F Fields For C UL and cETL compliance only Mesures de s curit importantes Lorsque vous utilisez votre appareil vous devriez toujours suivre certaines mesures de pr caution de base afin de r duire les risques d incendie d lectrocution et de blessures corporelles dont ceux qui suivent 1 Linstallation par un adulte est requise 2 N utilisez pas cet appareil pr s de l eau ni de toute autre source d humidit par exemple pr s d une baignoire cuve a lessive vier de cuisine dans un sous sol humide ni pr s d une piscine dans un soussol humide ou une douche 3 Ne placez pas cet appareil sur un chariot meuble tr pied support de montage ni table chancelants 4 Les trous et ouvertures du boitier situ s a l arri re de l appareil ou sous celui ci servent a a rer l appareil Pour l emp cher de surchauffer ne bloquez sous aucun pr texte ces ouvertures et n emp chez pas a ration ad quate de l appareil en le pla ant sur un lit divan tapis ou toute autre surface similaire De m me ne le positionnez pas a proximit ni au dessus d une source de chaleur ou d un calorif re De plus ne placez pas l appareil dans un endroit avant de vous assurer qu il y ait une bonne circulation d air 5 N enfoncez jamais d objets a travers les ouvertures de cet appareil car ils pourraient entrer en contact avec des points de tension dangereux ou causer des courts circuits qui peuvent d g
7. Go to www vtechphones com to register your product for enhanced warranty support and the latest VTech product news VC7003 Accessory Motion Sensor for use with ULE certified systems ULE UltraLowEnergy vtech User s manual Visit www vtechphones com wireless monitoring for the latest ULE compatible products Congratulations on purchasing your new VTech product Before using this product please read Important safety instructions This manual has instructions on how to set up and register your new sensor For instructions on sensor settings see the user s manual that came with your ULE compatible products Visit www vtechphones com wireless monitoring for a list of the latest ULE compatible products Sensor unit overview You may also view or download the online User s manual of the respective product for a full set of installation and operation instructions at www vtechphones com In Canada visit www vtechcanada com What s in the box Your product package contains the following items Save your sales receipt and original packaging in the event warranty service is necessary 1 Screw cover e Slide to open or close the screw compartment case to reveal the battery compartment case and PAIRING button Motion sensor Lithium battery 2 Back cover 3 LED light f f f e Flashes red for a while when the Screw t r sensor is powered on back cover x 3
8. Product under the terms of this limited warranty this limited warranty also applies to the repaired or replacement Product for a period of either a 90 days from the date the repaired or replacement Product is shipped to you or b the time remaining on the original one year warranty whichever is longer What is not covered by this limited warranty This limited warranty does not cover 1 Product that has been subjected to misuse accident shipping or other physical damage improper installation abnormal operation or handling neglect inundation fire water or other liquid intrusion or 2 Product that has been damaged due to repair alteration or modification by anyone other than an authorized service representative of VTech or 3 Product to the extent that the problem experienced is caused by signal conditions network reliability or cable or antenna systems or 4 Product to the extent that the problem is caused by use with non VTech accessories or 5 Product whose warranty quality stickers product serial number plates or electronic serial numbers have been removed altered or rendered illegible or 6 Product purchased used serviced or shipped for repair from outside the United States of America or Canada or used for commercial or institutional purposes including but not limited to Products used for rental purposes or 7 Product returned without a valid proof of purchase see item 2 on the next column or
9. change in the mounted height of the sensor Side view Height 6 9 feet 2 1 meters 1 3 feet 0 4 meter Top view N Up to 34 4 feet y 10 5 meters Detectionarea For motion detection of babies or pets If you use the motion sensor only to detect the motion of babies or pets you can mount the sensor at a lower position to shorten the minimum distance before reaching the detection area Side view Height 3 3 feet 1 meter 0 7 feet 0 2 meter Top view h Up to 16 4 feet 4 5 meters Detectionarea P Height 3 3 feet 1 meter Check the sensor before use The Motion sensor is more sensitive in detecting motions crossing the space in front of the sensor than that moving towards the sensor Follow the steps below to check if you receive alerts at your ULE compatible product Refer to the Installation guide or user s manual of your ULE compatible product for the sensor alerts see wnn see mee wn 1 Place the sensor on a stable flat surface 2 Walk across the area in front of the sensor e You will receive alerts at your ULE compatible product e The LED light on the motion sensor will flash red once JI NOTE e Once motion is detected the sensor will only start to detect motion again after one minute Test the sensor signal strength You can mount the motion sensor at a location where family members or unwanted visitors are likely to be comin
10. cy energy that can be safely absorbed by a user or bystander according to the intended usage of the product This product has been tested and found to comply with the FCC criteria The sensor unit shall be installed and used such that parts of all persons body are maintained at a distance of approximately 8 in 20 cm or more This Class B digital apparatus complies with Canadian requirement CAN ICES 3 B NMB 3 B Industry Canada This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation The term IC before the certification registration number only signifies that the Industry Canada technical specifications were met This product meets the applicable Industry Canada technical specifications RF radiation exposure statement The sensor complies with FCC RF radiation exposure limits set forth for an uncontrolled environment The sensor unit should be installed and operated with a minimum distance of 8 in 20 cm between the sensor and all persons body This transmitter must not be co located or operating in conjunction with any other antenna or transmitter This equipment complies also with Industry Canada RSS 102 with respect to Canada s Health Code 6 for Exposure of Humans to R
11. g and going 1 Take the sensor to the desired mounting location and then hold it the desirable height Refer to Motion detection range section 2 Walk across the area in front of the sensor again to make sure you receive alerts at your ULE compatible product mi see a see a NOTES e If there is no alert received when you walk across the area in front of the sensor move your ULE compatible product closer to the mounting location or move the sensor closer to the respective product e Use adhesive tape to hold the sensor temporarily in place e Depending on surroundings and obstructing factors like walls or cabinets the sensor may not transmit to the ULE compatible product properly Mount the sensor J9 NOTES e This sensor must be mounted vertically on wall Do not mount the motion sensor in a horizontal orientation or flat on the ceiling e Make sure the mounting surface is clean A textured surface or any imperfections to a smooth surface can keep the mounting tape from making a strong bond e This device detect or performs better when provided with a constant and stable environment Avoid placing the sensor at a location which faces direct sunlight or exposes to areas that may change temperature rapidly or where there are air ducts or substantial airflows e The recommended mounting height for motion detection of adults is between 6 2 feet 1 9 meters and 7 5 feet 2 3 meters and that for babies o
12. in this manual There may be a risk of explosion if a wrong type of battery is used for the sensor unit e Do not dispose of the battery in a fire Check with local waste management codes for special disposal instructions e Do not open or mutilate the battery Released electrolyte is corrosive and may cause burns or injury to the eyes or skin The electrolyte may be toxic if swallowed e Exercise care in handling battery in order not to create a short circuit with conductive materials Precautions for users of implanted cardiac pacemakers Cardiac pacemakers applies only to digital cordless devices Wireless Technology Research LLC WTR an independent research entity led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers Supported by the U S Food and Drug Administration WTR recommends to physicians that Pacemaker patients e Should keep wireless devices at least six inches from the pacemaker e Should NOT place wireless devices directly over the pacemaker such as in a breast pocket when it is turned ON WTR s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices FCC and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission FCC rules These requirements a
13. lectrolyte qui s en chapperait est corrosif et pourrait causer des br lures ou des blessures aux yeux ou a la peau L lectrolyte est toxique si aval e Soyez prudents lorsque vous manipulez les piles afin d viter les courts circuits provoqu s par des mat riaux conducteurs Stimulateurs cardiaques implant s dans Porganisme Les simulateurs cardiaques ne s applique qu aux dispositifs num riques sans fil Lorganisme Wireless Technology Research LLC WTRY une firme de recherche ind pendante a men une valuation pluridisciplinaire des interf rences entre les t l phones sans fil portatifs et les stimulateurs cardiaques implant s dans l organisme Appuy e par l Administration des aliments et drogues FDA des Etats Unis la firme WTR recommande aux m decins Avis aux d tenteurs de stimulateurs cardiaques e Vous devriez maintenir les dispositifs sans fil a au moins six pouces du simulateur cardiaque e Ils ne doivent PAS placer le t l phone sans fil directement sur le stimulateur cardiaque tel que dans une poche de chemise lorsque celui ci est en marche L tude effectu e par l organisme WRS n a pas identifi de risque pour les d tenteurs de simulateurs cardiaques caus s par les gens qui utilisent un t l phone sans fil a proximit de ceux ci Limited warranty What does this limited warranty cover The manufacturer of this VTech Product warrants to the holder of a valid proof of
14. purchase Consumer or you that the Product and all accessories provided in the sales package Product are free from defects in material and workmanship pursuant to the following terms and conditions when installed and used normally and in accordance with the Product operating instructions This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period Materially Defective Product During the limited warranty period VTech s authorized service representative will repair or replace at VTech s option without charge a Materially Defective Product If we repair the Product we may use new or refurbished replacement parts If we choose to replace the Product we may replace it with a new or refurbished Product of the same or similar design We will retain defective parts modules or equipment Repair or replacement of the Product at VTech s option is your exclusive remedy VTech will return the repaired or replacement Products to you in working condition You should expect the repair or replacement to take approximately 30 days How long is the limited warranty period The limited warranty period for the Product extends for ONE 1 YEAR from the date of purchase If VTech repairs or replaces a Materially Defective
15. r handle it with wet hands Do not install the sensor near a sink bathtub or shower Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment For your own safety take caution when using electrical appliances during storms Cleaning your sensor Your sensor has a durable plastic casing that should retain its luster for many years Clean it only with a dry non abrasive cloth Do not use dampened cloth or cleaning solvents of any kind When you are not going to use the sensor for some time remove the battery from the sensor Store the sensor in a cool and dry place E EE CE me TEO E Below are the questions most frequently asked about the sensor If you cannot find the answer to your question visit our website at www vtechphones com or call 1 844 848 8324 1 844 84 VTECH for customer service In Canada visit our website at www vtechcanada com or call 1 800 267 7377 Make sure the CR123A lithium battery is installed The sensor may be deregistered from the telephone base Register it back to your ULE compatible product The sensor does not work at all The sensor may be out of range Move the sensor closer to your ULE compatible product Important safety instructions When using your equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury including the following 1 Adult setup is required 2 Do no
16. r pets is about 3 3 feet 1 meter e If you drill the holes into an object other than a stud insert the screw anchors into the holes and tap gently on the ends with a hammer until the screw anchors are flush with the wall or ceiling re e You can choose to mount the sensor with the mounting tape first Remove the mounting tape and use screws later if you decide to mount it at that location for long term Mount with tape Mount on the wall with fixed angle Mount with screws Mount on the wall with fixed angle 2 Optional Insert screw anchors if necessary Drill a hole here This product requires professional installation in accordance with UL 681 Mount on the wall with adjustable detection angle STP e You can mount the sensor next to the corner of wall and then rotate it 45 degree for optimal detection coverage Optional Insert screw anchors if necessary je Mitte Fen General product care Taking care of your sensor Your sensor contains sophisticated electronic parts so it must be treated with care Avoid rough treatment Place the sensor down gently Save the original packing materials to protect your sensor if you ever need to ship it Avoid water Your sensor can be damaged if it gets wet Do not use the sensor outdoors in the rain o
17. re intended to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation To ensure safety of users the FCC has established criteria for the amount of radio frequen
18. t use this product near water For example do not use it next to a bath tub wash bowl kitchen sink laundry tub or swimming pool or in a wet basement or shower Do not place this product on an unstable table shelf stand or other unstable surfaces 4 This product should not be placed in any area where proper ventilation is not provided This product should never be placed near or over a radiator or heat register 5 Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit Never spill liquid of any kind on the product 6 To reduce the risk of electric shock do not disassemble this product but take it to an authorized service facility Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks Incorrect reassembling can cause electric shock when the product is subsequently used 7 Periodically examine all components for damage 8 Children should be supervised to ensure that they do not play with the product 9 The product is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety SAVE THESE INSTRUCTIONS Battery e CAUTION Use only the battery indicated
19. then register this new sensor to your ULE compatible product Add and register a sensor Add your new VC7003 motion sensor to your ULE compatible product Visit www vtechphones com wireless monitoring for a list of the latest ULE compatible products Register each sensor to the respective ULE compatible product before use SI NOTE a Deregister a sensor or all sensors e Please wait until the red LED light stop flashing before you register the motion sensor e Refer to the online User s manual of your ULE compatible product at www vtechphones com support manuals to deregister a sensor or all sensors To register a motion sensor 1 Refer to the online User s manual of your ULE compatible product at www vtechphones com support manuals to enter the registration mode 2 Use a narrow pointed object such as a pencil to press and hold the PAIRING button on the motion sensor until the LED light flashes green to enter the registration mode Motion detection range The motion sensor can detect a motion occurred at a distance of up to 40 feet 12 meters from itself when it is mounted at the height of 7 9 feet 2 4 meters It is recommended to mount the sensor at the height between 6 2 feet 1 9 meters and 7 5 feet 2 3 meters for optimal detection coverage SI NOTE e The numerical values in the following illustrations are for conceptual reference only The actual angles and distances may vary upon the
20. y location and set of conditions is unique and VTech is not responsible for losses injury or damage resulting from the user s use of this product This product is covered by U S Patent 8 825 043 Other patents may be pending Designed to fit your home And your life VTech Communications Inc A member of THE VTECH GROUP OF COMPANIES VTech is a registered trademark of VTech Holdings Limited Specifications are subject to change without notice Copyright 2015 for VTech Communications Inc All rights reserved 07 15 VC7003_CIB_V1 0 Document order number PN 89330000

Download Pdf Manuals

image

Related Search

Related Contents

user manual jun 08 FR  2008-09 KRF750RAF Teryx -Service Manual  tutorial - Johannes Karreth  Owner`s Guide  Aton CL100 Istruzioni per l`uso  Product User Manual Model GA101x Series High Power E  Matrici RECKLI: istruzioni per l`uso  EIP Microwave Model 575B & 578B Source Locking  1 Comment accéder à l`application Billing Manager ? 2    

Copyright © All rights reserved.
Failed to retrieve file