Home

1. INTRODUCTION Thank you for purchasing the

image

Contents

1. power is first turned on the unit is in manual scene mode 2 If in Program mode press and hold the Program button for three seconds and the program LED will go out The controller is now in Manual mode 3 Be sure that the Auto amp Music buttons LEDs are off I 4 Select the Bank using the Up and Down Bank buttons that stores the scenes you wish to run 5 Press the Scene Button to run the scenes you selected Auto Run Scenes This function will run a blank of programmed scenes in a sequential loop 1 Press Auto Del once to activate the Auto Run mode 2 Use the Up and Down Bank buttons to select a bank of scenes to run 3 Now you can use the Speed and Fade Sliders to adjust the scenes to you liking The fade setting should never be slower than the speed setting or the scenes will not be completed 4 You can change banks on the fly by pressing the Up and Down Bank buttons Music Run Scenes 1 Press the Music Bank Copy button and the corresponding indicator light will come on in LCD 2 Select desired bank that stores the scenes you wish to chase by suing Up or Down buttons or you can control via MIDI signals 3 Press Music Bank copy once more to exit MIDI Run Scenes 1 Select bank to run scenes using MIDI whenever it is in Manual Auto or Music Run mode RUNNING CHASES Manual Run chases This function will enable you to manually step through a selected chase 1 Press and hold the program button for
2. three seconds to enter programming mode 2 Start a chase by selecting one of the six Chase buttons 3 Press the TAP SYNC button Each time you press the button you will step through the chase 4 Use Bank select buttons to scroll through the chases 5 Press and hold the Program button for three seconds to exit programming mode Auto Run Chases 1 Press any or all of the six Chase button to select the desired chase 2 Press and release the Auto Del button The corresponding LED will flash 3 Adjust the Speed and Fade Time to your desired settings The Chase will run according to your settings 4 You can override the speed and fade time by tapping the TAP SYNC Display button three times Then the chase will run based on the time interval of your taps Note A Never adjust Fade time slower than the Speed setting otherwise your scenes will not be completed before a new step is sent B If you wish to include all the chases press Auto Del button before selecting chase Music Run Chases 1 Press one of the six chase buttons to select your desired chase 2 Press and release the Music Bank Copy button 3 The corresponding LED will flash in the LCD 4 Your chase will now run to the sound Note When you exit a chase by pressing the Chase button the controller will automatically run the scenes that are in the last bank accessed To stop the movement of the lights either use the Blackout button or pr
3. 1 INTRODUCTION Thank you for purchasing the DMX MASTER 1921 1922 The DMX MASTER is a standard universal DMX 512 controller controlling up to 192 DMX channels Following are its main features A 12fixtures of up to 16 channels B 30 banks of 8 scenes each for a total 240 scenes C 6 chased each up to 240 scenes D 8 faders adjust the DMX output level from 0 255 E 2 faders control chase speed and fade time F MIDI control through MIDI interface G Built in Microphone H Blackout I Specification Power input DC9 12V 300mA min DMX Output 3 pin female XLR Size 19 x 5 25 x 3 inch 2 FUNCTIONS Front Control Panel 9 2 0 o o loooooo0ooo wz olo o oO V be TEL ARATAT Qo o gt o PA Q9 O o o Ot Oo 0 Oo o O oO pz mo O DMX MASTE re is 1 Scanners To select any or all of 12 fixtures 2 Scenes to store or run scenes 3 Page Select To select page A for channel 1 to 8 or page B for channel 9 to 16 4 LCD Display 4 digit showing values and settings chosen 5 Bank up A and down WV 30 banks are available for selecting 6 Chases To select 1 6 chases 7 Blackout Disables all channel outputs 8 Program to activate the program mode Display links when activated 9 MIDI Add To control MIDI operation or activates save function 10 Auto Del to select Auto run in chase mode or delete scenes and or chases 11 Music bank Copy To trigge
4. 3 48 1 6 4 40 64 1 5 6 5 65 80 1 7 6 81 96 1 5 7 7 97 112 1 6 7 8 113 128 1 5 6 7 9 129 144 1 8 10 145 160 1 5 8 11 161 176 1 6 8 12 177 192 1 5 6 8 Note When addressing your fixtures follow the starting address in this instruction not the addressing found in your fixture user manual Scene Programming 1 Press and hold Program button for three seconds to activate program mode The LCD next to program blinks indicating the program has been started 2 Select a fixture to program by pressing any or all Scanner buttons 1 to 12 See os eae ee OS jesseni a eS Dee 3 Adjust the faders to the desired output level for all channels i e Color Gobo Pan Tilt etc of selected fixture or fixtures Press Page Select A B if the fixture has more than 8 channels When selecting from Page A to B you have to move sliders to activate channels 4 If you have set the fixture to your liking and wish to program another fixture press the Scanner button you have finished adjusting This will hold the fixture in its final configuration Select another fixture s by pressing the target Scanner button and proceed to adjust the faders to achieve the settings you desire 5 Repeat steps 2 and 3 until you have set the fixtures the way you like 6 When entire scene is set to your liking press and release the MIDI Add button 7 Select the desired bank to store scene using the Up and Down Bank select button There are 30 b
5. anks you can store up to 8 scenes per bank for a total of 240 scenes 8 Then press a Scene Button 1 8 to store the scene All LEDs blink 3 times The LCD will display the bank and scene where scene was stored 9 Repeat steps 2 8 to record your desired scenes You can copy the settings from one scanner button to another in case you want to add more fixtures to your show Just press and hold the scanner button you want to copy and then press the scanner button you want to copy to 10 To exit programming mode press and hold the Program button for 3 seconds seenussacee ere SS Soote eee Su svsekeecke Rees Sue eee a eE When you exit programming the Blackout Led is on press Blackout button to de function blackout Scene Edition This function allows you to make changes in a previous programmed scene 1 Press the program button for three seconds to enter program mode 2 Use the Bank UP and Down button to select the bank that stores the scene you wish to edit 3 Select the scene you want to edit by pressing its Scene button 4 Use the faders to make your desired adjustments 5 Press the MIDI Add button then followed by the Scene button that corresponds to the scene you editing to store it to memory Note You must select the same scene you selected earlier otherwise you may accidentally record over an existing scene Scene Copy This allows you to copy the settings of one scene to another 1 Press the Program button fo
6. at the same time to delete the Bank The LCD will flash to indicate the function completion Chase Programming You have to program scenes before you can program chases 1 Press and hold the program button for 3 seconds to enter programming mode 2 Choose and chase 1 6 to be programmed 3 Select the desired Scene form any bank Scenes are run in the order that they are programmed into the chase 4 Press the MIDI Add button all the LED will flash 3 times 5 Repeat steps 3 and 4 as many as you want You can record up to 240 scenes into one chase 6 Press and hold the program Button for 3 seconds to exit programming mode Copy a Bank to a Chase 1 Press and hold the Program Button for three seconds to enter the programming mode 2 Select the bank of scenes you wish to copy 3 Select the chase to which you want to copy the bank of scenes 4 Press Music Bank Copy and MIDI Add simultaneously The scenes of the bank are copied to the Chase 5 Press and hold the Program Button for three seconds to exit programming mode Sess e ase ete SS Qos SS ees EDITTING CHASES Adding a Step to a Chase 1 Press and hold Program Button for three seconds to enter the programming mode 2 Select the chase 1 6 to which you wish to add a step 3 Press TAP SYNC DISPLAY and the LCD show the scene and bank This is the bank containing the scene you wish to add 4 Press TAP SYNC Display again and LCD show the Chase that
7. e address is correct If the XRL cable is more than 30 meters check if it is terminated properly B Mirrors don t respond when faders are moved Make sure address is correct Make sure speed is adjusted if available for faster movement Not all fixtures have speed adjustment If the XRL cable is more than 30 meters check if it is terminated properly C Scenes don t run after record them Make sure to press MIDI Add button before pressing Scene button Be sure you are in the correct Bank that has scenes recorded D scenes don t run correctly as recorded them Made sure all fixtures were recorded Make sure you are in the correct bank that has scenes recorded If the XRL cable is more than 30 meters check if it is terminated properly E Chase don t run after record them Make sure to press MID Add button after pressing Scene button LED should blink after pressing MIDI Add button Be sure you are in the correct chase that has steps recorded If in Auto Mode did you adjust speed after selecting Auto Is Fade time to long for speed selected If the XRL cable is more than 30 meters check if it is terminated ee USER MANUAL DMX CONTROLLER Model DMX 192 CE Please read over this manual before operation the light
8. ess Music if in music mode or the Auto button MIDI CHANNEL SETTING MIDI Running 1 Press and hold the MIDK Add button the third and forth digits of LED display will blink indicating MIDI mode 2 Use the Up and Down buttons to select the MIDI channel 1 to 16 you would like to run 3 Press and hold the MIDI Add button once more to end MIDI mode MIDI Channel settings Note on Receive Note ON signals to execute corresponding function BANK NOTE NUMBER FUNCTION Bank 1 00 to 07 1 to 8 of Bank 1 on or off Bank2 08 to 15 1 to 8 of Bank 1 on or off Bank3 16 to 23 1 to 8 of Bank 1 on or off Bank4 24 to 31 1 to 8 of Bank 1 on or off Bank5 32 to 39 1 to 8 of Bank 1 on or off Bank6 40 to 47 1 to 8 of Bank 6 on or off Bank7 48 to 55 1 to 8 of Bank 7 on or off Bank8 56 to 63 1 to 8 of Bank 8 on or off Bank9 64 to 71 1 to 8 of Bank 9 on or off Bank10 72 to 79 1 to 8 of Bank 10 on or off Bank11 80 to 95 1 to 8 of Bank 11 on or off Bank12 88 to 95 1 to 8 of Bank 12 on or off Bank13 96 to 103 1 to 8 of Bank 13 on or off Bank14 104 to 111 1 to 8 of Bank 14 on or off Bank15 112 to 119 1 to 8 of Bank 140n or off Chases 120 to 125 1 to 6 chases BLACKOUT 126 BLACKOUT The DMX Master receives only MIDI notes and you might have to transpose your keyboard to find the proper notes 2 TROUBLESHOOTING A Colors don t respond when faders are moved Make sur
9. r sound activation in Chase mode or to copy a bank of scenes from one to another in program mode 12 Tap SYNC Display In Auto Chase mode used to change the rate of chase and in program mode change LCD display value 13 Fade Time Slider To adjust the Fade Time Fade Time is the time it takes the DMX Master to completely change from one scene to another 14 Speed Slider To adjust the rate of chase speed in Auto Mode 15 Speed Slider To adjust the output level from 0 255 or the intensity from 0 100 of each channel oe oe eS ROE ee p EEA a a eee 47 Rear Control Panel 16 MIDI in To receive MIDI data 17 DMX Polarity Select Make sure the polarity of your fixture and set the DMxX Master to the proper polarity 18 DMX Output To send DMX signal to fixtures or packs 19 DC input To supply a DC 9 12V power 300m A minimum 3 OPERATION INSTRAUCTION DMX 512 Addressing Dip Switch setting Each Dip switch has an address based on binary code Dip SwitchNO 1 2 3 4 5 6 7 8 9 Value 1 2 4 816 32 64 120 256 Select the address wanted by adding the total or Dip switches on Dip Switch no 10 is not used with DMX but normally to select some functions i e Master Slave Sound activation etc Each of the 12 fixtures is assigned 16 channels The Dip switches are set as per the chart below Scanners Channels Dip switches on 1 1 16 O or 1 based on scanner 2 17 32 1 5 3 3
10. r three seconds to enter program mode 2 Use the Bank Button up and Down to locate the bank that stores the scene to copy 3 Select desired Scene you want to copy by pressing the Scene button 4 Use the Bank buttons Up and Down to select the bank where you want to store the copies scene 5 Press MIDI Add followed by the Scene Button where you want to copy to SoBe eee Ce Gace ears E EEEE E Delete Scene This function will reset all DMX channels incorporated with a scene to 0 1 Select the desired scene to delete 2 While pressing and holding Auto Del press the Scene button 1 to 8 you want to delete Erase All Scenes This will erase all scenes in all banks All scenes are reset to 0 1 Press and hold down Program and Bank Down buttons while turning power off 2 Re connect the power all scenes should be erased Copy Bank This function enables you to copy the settings of one bank to another bank 1 Press and hold the Program Button for three seconds to activate the programming mode 2 Select the bank you want to copy 3 Press and release the MIDI Add button 4 Select the bank into which you want to copy to 5 Press the Music Bank Copy button The LCD display will flash shortly to indicate the copy has been finished Delete a Bank 1 Press and hold the Program Button for three seconds to activate the programming mode 2 Select the bank to be deleted Press the Auto Del and Music Bank Copy
11. you have selected 5 Use the Up and Down buttons to scroll through the chase to reach you have selected 6 Press MIDI Add the LCD will read one step number higher 7 Press the scene button you wish to add 8 Press MIDI Add again to add new step 9 Press and hold the program button for three seconds to exit the programming mode Deleting a Step in a Chase 1 Press and hold the Program Button for three seconds to enter the programming mode 2 Select the chase 1 to 6 from which you wish to delete a step 3 Press TASP SYNC Display and the LCD shows the Chase that have selected 4 Use the Up Down buttons to scroll through the chase to reach the step you wish to delete i eS Sse ee Qis si Sa 5 Press Auto Del and the scene will be deleted 6 Press and hold the program button for three seconds to exit the programming mode Delete Chases All Scenes are still available 1 Press and hold the program button for three seconds 2 Press the chase button that you want to delete 3 Press and hold the Auto Del button and then press and hold the Chase button of the have to be deleted The LEDs will flash three times 4 Release both buttons and the chase will be deleted Delete All Chases all scenes are still available 1 Press and hold down the Bank Down and Auto Del buttons while turning power off 2 Re connect the power all chases should be deleted RUNNING SCENES Manual Run Scenes 1 When the

Download Pdf Manuals

image

Related Search

Related Contents

HP t5700 User's Manual  USER MANUAL  Explorer 110 FAQ  Samsung Aspirapolvere SC9100 con sacco, Multi Chamber System™, 1600 W User Manual    Alcool à brûler - Express Outillage  VI Poutre de suspension  Nextar MP-1607 Portable DVD Player  precaución  

Copyright © All rights reserved.
Failed to retrieve file