Home

BT video Baby Monitor 1000 - User Manual

image

Contents

1. _ _ BTDIGITAL VIDEO BABY MONITOR 1000 IJO SET UP amp USER GUIDE Find more user manuals and product information at www liGo co uk manuals BT User Guide Welcome to your BT Digital Video Baby Monitor 1000 Large 2 8 LCD screen so you can see your baby clearly Quality video experience with a high refresh rate for a smooth picture Digital sound quality lets you hear your baby breathe gurgle snuffle or cry with complete clarity Wireless range of up to 300m outdoors and up to 50m indoors in ideal conditions giving you the freedom to move around with clear reception and no interference from other baby monitors Auto adjusts between day and night modes so no need to press buttons in the dark Baby room temperature monitor 5 Lullabies Talk Back feature lets you instantly reassure and calm your baby Connect up to 4 cameras Out of range and battery low warnings This User Guide provides you with all the information you need to get the most from your BT Digital Video Baby Monitor 1000 Please read this guide carefully and keep it for future reference Need help If you have any problems setting up or using your BT Digital Video Baby Monitor 1000 or would like any additional or replacement batteries call our free BT Digital Video Baby Monitor 1000 Helpline on 0808 100 6554 Our dedicated advisors are more likely to be able to help you than the retailer where you made your purc
2. If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Your BT Digital Video Baby Monitor1000 13 Parent unit screen display icons continued CAM 1 2 3 4 Current view status Displays the number of the Baby unit that is being viewed when in single CAM mode Displays the highlighted Baby unit when in multi CAM mode The icon does not appear when the Parent unit has no paired Baby unit Battery status The battery icon will scroll when charging Displayed when the battery is fully charged Il Displayed when the battery is low and needs charging Displayed when no battery is installed but is operating using the power adaptor or the battery has been installed incorrectly If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 14 Your BT Digital Video Baby Monitor 1000 Parent unit menu map Alert Tone m Low Battery Tone L No Link Alert r ALL CAM CAM1 CAM 3 CAM 4 r Minimum L_ Format On if speaker is off Maximum Alert TMenu mm Vibration o Off Sound Activated Screen an es Off r Level 1 L Level 2 L Level 4 Level 5 _ Unpair CAM r English L_ Espanol If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp On
3. L_ Off M Ont Off Level 1 5 5 Maximum 3 Default ALL CAM CAM 1 CAM 2 CAM 3 CAM 4 ALL CAM m CAM1 CAM2 M CAM3 CAM 4 m ALL CAM CAM1 CAM 2 M CAM3 On Off Off CAM 4 Farenheit Celsius Scroll options lt select CAM slot to use gt Scroll options lt select CAM slot to use gt On Ott Ont Off Ont Off Your BT Digital Video Baby Monitor 1000 15 1 Default setting Scroll options lt select between 11 and 20 degrees gt 1 15 Scroll options lt select between 21 and 30 degrees gt 1 24 If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Setting up WARNING Only use the battery supplied Using another type could permanently damage the unit Battery performance The operating time for using the rechargeable battery is limited It will last for approximately 6 hours in standby mode but this will vary depending on the sensitivity level you have set your actual use and the age of the battery Therefore if you want to monitor your baby for long periods we strongly recommend you connect the power adaptor to the Parent unit especially at night Please note that new batteries do not reach full capacity until they have been in normal use for several days The char
4. Baby monitor sensor Pre set temperature alert range The Baby unit comes with pre set maximum and minimum temperatures as recommended by the UK Department of Health as part of the recommendations to reduce the risk of cot death If the temperature falls below or goes above the setting an alert will sound on the Parent unit if the temperature alert is set to On The temperature alert pre set temperatures are 15 C and below and 24 C and above Healthcare professionals advise that the ideal temperature for your baby s room is between 16 C and 20 C Press Press Raggy or ig again to select Minimum v Vol Press Be or to choose the Baby unit you want or all Baby units then press or ka Vol v Use ee or QM to select the temperature you want then press to confirm You will hear a confirmation tone Set the maximum room temperature You can set the maximum temperature between 21 C 70 F and 30 C 86 F The pre set maximum temperature is 24 C 85 F v ea Vol Press vee OF EP to highlight TEMPERATURE then press or p v Vol Press Es or QM to highlight Maximum then press or B Vol Vv Press eS or to choose the Baby unit you want or all Baby units then press Ragy or Ed If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Parent unit settings menu 35 Vol Vv 5 Use
5. ee or gm to choose the Baby unit you want or all Baby units then press or Vol 4 Use or gm to select the level you want from Vol A Level 1 to Level 5 then press Or confirm You will hear a confirmation tone Room temperature monitor There is a temperature sensor on the Baby unit to monitor the temperature in your baby s room When the temperature alert is set to On an alert beep will sound to warn you when the temperature is out of the range you have set Set the minimum room temperature You can set the minimum temperature between 11 C 52 F and 20 C 69 F The pre set minimum temperature is 15 C 57 F 1 Press Vv Vol 2 Press eS or QM to highlight TEMPERATURE then press or B Parent unit settings menu 33 IMPORTANT The temperature sensor used in this BT Digital Video Baby Monitor 1000 is intended as a guide to provide parents with an indication of the room temperature in which the unit has been placed It is designed to operate within an approximate tolerance of 2 C and is not intended to be as accurate as some medical devices If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 34 Parent unit settings menu Please note that your own temperature reference e g your central heating thermostat may not be as accurate possibly due to tolerances and positioning of the thermostat in relation to the
6. if you want to monitor your baby for long periods we strongly recommend you connect the power adaptor to the Baby camera unit 5 Once the Parent unit battery has fully charged press the D button on the Parent unit until the screen becomes active The battery icon on the top line of the screen will be solid to indicate that the battery is fully charged i Baby unit The Baby unit can be powered up using the power adaptor provided or using 4 AA batteries not supplied Even if the power adaptor is used we recommend that you also install batteries to guarantee continual operation in the case of a power cut Install 4 AA batteries not supplied into the battery compartment as shown observing the polarity markings inside Then replace the battery compartment cover If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Settingup 19 Removing the batteries If the Baby unit is not going to be used for along time remove If you ever need to remove the batteries unplug heathens a prevent any the power adaptor and then open the battery possible leakage compartment cover and use the ribbon to gently Rechargeable batteries pull them out can be used but the Baby unit cannot charge the rechargeable batteries 2 Plug the power adaptor cable item code 064785 into the socked marked 3 on the side of the Baby f x x When the batteries are low the uni
7. or a replacement as advised by the Helpline Only use x4 AA batteries not supplied for the Baby unit You can use rechargeable batteries but the Baby unit will not charge them Dispose of used batteries according to the instructions Do not dispose of batteries in a fire as they may explode Only use the power adaptor cables supplied Using an incorrect power adaptor could seriously damage the product If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Important safety information 5 e Do not try and disassemble open or remove parts of the product Contact the Helpline for any repairs e During continual use the Baby unit and Parent unit power adaptors may become warm to the touch This is normal and is not something to be concerned about If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp In this guide Important safety information 4 Your BT Digital Video Baby Monitor 1000 Baby Unit ccccsecsseesseeseceseeeseeseeeees 8 Back of Baby Unit csceseeseeeeeees 9 Parent UNM tvceesccesscetaadendadessescctesescnes 10 Parent unit screen display icons 12 Parent unit menu map ccceeeeee 14 Setting UD sicceeess cezsscecccieceossecedesis 16 Parent Units cers cossieesiveswsicessiecenicasees 16 Baby UNM wscsscsssccesteecssstcesasccbceessannees 18 Positioning and op
8. turn the loudspeaker volume up on the Parent unit to hear the sounds transmitted from the Baby unit see page 27 If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Settingup 21 Testing the units before use It is important that you test the units before use and at regular times thereafter especially if they have not been used for some time To test your units 1 Place the Parent and Baby units in the same room If no connection can be but make sure they are at least 2 metres apart rela ae fee on 2 Press and hold the Aa button on the Baby unit ioc ts canal until the Power light on the button turns on for linking The Link light will 3 Press and hold the button on the Parent unit Sana uaa until the display shows Waiting for linking and the Link light flashes 4 Press the button on the Parent unit to view the image from the Baby unit Pairing the units The Parent and Baby unit supplied are already paired You can add or replace Baby units purchased separately to your baby monitor system You can pair a maximum of four Baby units to your Parent unit Each new Baby unit must be paired to the Parent unit before use see page 40 for instructions If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 22 Setting up Important Before you wall mount please check that e the wall can s
9. view mode to By speaking into the Parent unit your baby will hear use Talk your voice from the Baby unit Please note that when using the Talk feature you will not be able to If the loudspeaker volume on hear your baby until you release the J button the Parent unit is set to off it will be reset to the default 1 If you have more than one Baby unit you may need A E E to press the button first to select the Baby and hold the JJ button unit you want to talk to 2 Press and hold the J button to speak to your baby Lullaby playback will be paused you should speak towards the MIC microphone on if the Talk feature is being used the Parent unit Your voice will be heard from the when finished lullaby playback Baby unit and while the J button is depressed the ene Talk light will be on When using the Talk feature hold the Parent unit approximately 30cm in front of your mouth when talking to baby If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Parent unit settings menu To return to the previous menu at any time press the H lt button The default setting is on The Baby unit low battery alert will only work when viewing that particular Baby unit in single CAM or multi CAM mode Using the menu The button on the Parent unit can be used to select and change settings on the Baby and Parent units You can access the menu by 1 Press th C
10. Press and hold to turn on or off Zoom Whilst viewing in single CAM mode press to zoom in or out View Press repeatedly to view an individual camera or all cameras at the same time Press and hold to turn the screen off or press to turn it on Power socket beneath the rubber cover Speaker battery is fully Ce light Talk light 5 To listen to sounds charged if connected ON Parent unit screen On J Parent unit transmitted from the to mains power or S in multi CAM mode or is talking to the Baby unit Parent unit battery the Parent unit speaker Baby unit Talk is adequate when volume is turned off Whilst viewing in operated using single CAM mode the battery press and hold to talk to the Baby unit If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Parent unit continued Up Vol Press to increase the Parent unit speaker volume Press to scroll up a menu Whilst viewing in zoom mode press to move up Whilst viewing in multi CAM mode press to scroll up to highlight a certain camera Back In menu mode press to return to the previous menu Whilst viewing in zoom mode press to move to the left Whilst viewing in multi CAM mode press to move left to highlight a certain camera Menu Select Press to enter the menu In menu mode press to select an option or save a setting Whilst viewing in multi CAM mode press to select a c
11. ae or QM to select the temperature you want then press Hv confirm You will hear a confirmation tone Turn the temperature alert on or off 1 Press The default setting is On The temperature alert will Vol R 2 Press SE or to highlight TEMPERATURE only work when viewing that then press or gt particular Baby unit in single P vol CAM or multi CAM mode v ol 3 Press ae or QM to highlight Alert then press ef Vv Vol 4 Press ee or RM to choose the Baby unit you want or all Baby units then press or v Vol 5 Use or QM to select On or Off then press Or confirm You will hear a confirmation tone If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 36 Parent unit settings menu Press So Press eto highlight TEMPERATURE Set the temperature format You can set the temperature format as either Celsius or Fahrenheit The default setting is Celsius Vol then press or p Vv Vol Press za or QB to highlight Format then press oW Vol v Press wa or to choose Celsius or Fahrenheit then press Or confirm You will hear a confirmation tone If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Parent unit settings menu 37 Vibrate The following events will cause You can set whether you want the Parent unit tie Rafent Umt tOAiDrAtenwWh
12. ange Reset the units by turning them off and unplugging the power adaptor cables Wait for 15 seconds and plug them back in Turn the units on and allow up to one minute for them to link The battery does not charge in the Parent unit make sure the battery is installed correctly see page 16 The battery light on the Parent unit should be on when charging try removing the battery completely and installing it again then charge for up to 12 hours may take up to 30 minutes to charge the Parent unit before it can be used for a short time e after time the battery may begin to wear out so you might need to purchase a new battery contact the Helpline If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp General information Cleaning Your units have a durable plastic casing that should retain their lustre for many years To clean use only a soft cloth slightly dampened with water or a mild soap Do not use excess water or cleaning solvents of any kind Guarantee Your BT Digital Video Baby Monitor 1000 is guaranteed for a period of 12 months from the date of purchase Subject to the terms listed below the guarantee will provide for the repair of or at BT s or its agent s discretion the option to replace the BT Digital Video Baby Monitor 1000 or any component thereof which is identified as faulty or below standard or as a result of inferior work
13. art you may have set the sensitivity level too high Try adjusting to a lower level to avoid audio feedback see page 32 The Parent unit plays all sounds from the Baby unit and I think it is too noisy you may have set the sensitivity level to Level 5 maximum If so the Baby unit will transmit any sound detected to the Parent unit To lower the sensitivity level see page 32 you may need to adjust the loud speaker volume on the Parent unit see page 27 The Parent unit doesn t play any sound when there is noise from the Baby unit make sure the Parent unit has power Check that the power adaptor cable is correctly connected and the power is turned on at the wall socket see page 17 Make sure that the battery in the Parent unit is fully charged see page 16 17 make sure the Parent unit is turned on see page 26 and that the loud speaker volume is not set to off see page 27 make sure the Parent unit is not monitoring in multi CAM mode see page 28 check that the sensitivity level is not set too low see page 32 If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp The link between the Baby and Help 45 e if the battery is completely flat it Parent unit is lost every now and then and I m experiencing sound or video interruptions move the Parent and Baby unit closer together but not less than 2 metres as the Parent unit may be out of r
14. button Press the ce or a button to scroll through the menu options When the menu option you want is highlighted on the left press the E or gt button to enter it Vol Press the or button until the feature or option you want is highlighted on the right then press the or kam button to enter the feature menu or to confirm your selection You will hear a confirmation tone Turn the battery low alert tone on off The Parent unit will emit an alert tone when the Parent or Baby unit battery is low Press 6 B i Press ae gam io highlight ALERT TONE then press or gt If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Parent unit settings menu 31 Press or again to select Low Battery Tone Vol 4 Use or ws select On or Off then press Bio confirm You will hear a confirmation tone Turn the No link alert on the Parent unit on off The Parent unit will beep whenever the link between the Parent and Baby unit is lost You can turn this alert beep on or off 1 Press v Vol 2 Press a or QM to highlight ALERT TONE then press or p v Vol 3 Use s or gM to highlight No Link Alert then press or gt Vv Vol 4 Use Ep or gM to select On or Off then press Vol Qo confirm You will hear a confirmation tone The default setting is on The No link alert will only work when viewing that particular Bab
15. e the Baby unit in place Your BT Digital Video Baby Monitor 1000 is now ready for use If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Using your BT Digital Video Baby Monitor 1000 Using the Baby unit Switch the Baby unit on off Press and hold the a button until the light on the button turns on 2 To turn the Baby unit off press and hold the a button for 2 seconds The light will turn off Adjust the Baby unit loudspeaker volume You can adjust the loudspeaker volume from Level 1 to Level 5 The default setting is Level 3 If you adjust the loudspeaker volume it will also adjust the parent voice Talk playback volume 1 Press the or button on the Baby unit at When the maximum or any time to increase or decrease the loudspeaker minimum volume levels have volume been reached you will hear an error tone Play lullabies from the Baby unit The Baby unit has five lullabies that can be played to gently soothe your baby The total lullaby playback time is about 15 minutes and it starts from where you stopped it last time If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 26 Using your BT Digital Video Baby Monitor 1000 Lullaby playback will be paused if the Talk feature is being used when finished lullaby playback will resume The infrared LED s may glow red sli
16. en set to do so to vibrate The vibrate setting is pre set to On if speaker is off 1 Press x volt Secs e Temperature alert 2 Press Sl og to highlight VIBRATION then pa e Sensitivity level exceeded press e Low battery alert Parent or Baby unit e Loss of link alert Vol Vv 3 Press A or QM to choose On if speaker is off Always on or Off then press Or confirm You will hear a confirmation tone If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 38 Parent unit settings menu Even when enabled the sound Sound activated screen activated acreen functionality i i When the Parent unit screen is turned off see page will temporarily be suspended if you press any button on the 28 you can set the screen to turn on automatically Parent unit To resume sound whenever there are sounds detected from the activated screen functionality Baby unit s The Parent unit screen will turn off press and hold the button EET automatically when no sounds are detected from the Baby unit s within 30 seconds The default setting is Off The Parent unit will only turn 1 Press e On if the sounds detected are from the last viewed camera 2 Press or EA to highlight SOUND or any camera if the view was wS nti cone ACTIVATED SCREEN then press 3 or SM v Vol 3 Press u or to choose On or Off then press Or confirm You will hear a co
17. erating range 20 Testing the units before use 21 Pairing the units scscceseeseeeees 21 Wall mounting the Baby unit Optional cc scccsscenecessocecevsedensegarects 22 Using your BT Digital Video Baby Monitor 1000 Using the Baby unit ccecseceeees 25 Switch the Baby unit on off 25 Adjust the Baby unit loudspeaker VOIUIMO si cafsncesasdecesccdessedennedevestestateon 25 Play lullabies from the Baby unit 25 To play lullabies ccc eeececesseceeees 26 Night VISION csccesscessesseesseesreeeees 26 Using the Parent unit ccsceeees 26 Switch the Parent unit on off 26 Adjust the Parent unit loudspeaker O E E 27 ZOOM EE EE S T 27 Zoom in or out in single CAM mode 27 VI OW sestecesscvssvctnasenesecscnsevcesevuasevensees 28 To view different Baby units 28 If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Zoom in or out in multi CAM mode if you have more than one Baby unit 28 To turn the screen on Off 00000 28 Talk to the Baby unit cseeeeees 29 Parent unit settings menu 30 Using the Menu ccccssscccessseeeeeees 30 Turn the battery low alert tone ON OF T EE AE 30 Turn the No link alert on the Parent unit On Off ccsccsceseeeeees 31 Sensitivity level csscscsseeeseesseees 32 To set the sound sen
18. ertain camera If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Your BT Digital Video Baby Monitor 1000 gt Whilst viewing in zoom mode press to move right In menu mode press to select an option Whilst viewing in multi CAM mode press to move right to highlight a certain camera Down Vol Press to decrease the Parent unit speaker volume Press to scroll down a menu Whilst viewing in zoom mode press to move down Whilst viewing in multi CAM mode press to scroll down to highlight a certain camera 11 12 Your BT Digital Video Baby Monitor 1000 Parent unit screen display icons Connection status Til displayed when strong signal strength is detected between the Baby and Parent unit T or Ti displayed when moderate signal strength is detected between the Baby and Parent unit Y displayed when the link between the Baby and Parent unit is lost Q Zoom Displayed when the camera at the Baby unit has been zoomed in SA Lullaby Displayed when a lullaby is playing at the Baby unit I Temperature alert Displayed when the temperature alert is set to on 18 C Current temperature Displays the temperature in the room where the Baby unit is Hugg Sound level indicators Light up to indicate the level of sound being transmitted from the Baby unit IIE Speaker volume Light up when adjusting the speaker volume level
19. et see pages 17 and 19 e check that the batteries are installed correctly in the Parent and Baby unit s and that the Parent unit battery has been charged correctly see pages 16 and 18 If the Parent unit battery is completely flat it may take up to 30 minutes to charge before it can be used for a short time e check that the Parent and Baby unit s are turned on see pages 25 and 26 the Parent unit may be too far from the Baby unit s move the Parent unit closer large obstructions may affect the signal between the Parent and Baby unit s Try to position the Baby unit s away from large obstructions other electrical products may cause interference Try to position your Parent and Baby unit s as far as possible from other electrical devices such as wireless routers radios mobile phones televisions personal computers cordless phones etc try unplugging the power adaptor cables from both units wait 15 seconds then plug them back in Turn the units on and allow 1 minute for the Parent and Baby unit s to link If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Help My Parent and Baby unit s are producing a high pitched noise the Parent and Baby unit s may be too close together Make sure they are at least two metres apart you may be too close to the Baby unit when you press and hold the button Make sure they are at least two metres ap
20. ge capacity of rechargeable batteries will reduce with time as they wear out so reducing the performance time of the Parent unit Eventually they will need to be replaced New batteries can be obtained from the BT Digital Video Baby Monitor 1000 Helpline on 0808 100 6554 Parent unit Remove the plastic protective film from the front of the unit Insert the battery supplied into the battery compartment It will only fit one way round Battery release tab Replace the battery compartment cover by aligning the cover flat against the battery compartment then slide it towards the centre of the Parent unit until it clicks into place If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Settingup 17 Removing the battery The Parent unit rechargeable battery will lose charge over If you ever need to remove the battery unplug a period f time even f the power adaptor and then open the battery switched off compartment cover Move the battery release tab If the Parent unit is not going see diagram on page 16 for position to the right to to be used for a long time release the battery remove the battery to prevent any possible leakage 3 Plug the power adaptor cable item code 064761 Battery low warning into the socked marked 3 on the side of the When the battery is low the Parent unit and plug the other end into the mains sc
21. ghtly when viewed in dark conditions This is normal To play lullabies Press the button to play Press the button to skip to the next lullaby Press the button to stop playback Night vision To help you monitor your baby at night the Baby unit automatically uses the light from its infrared LEDs when it is turned on in a dark room However it only transmits black and white images in this mode Using the Parent unit Switch the Parent unit on off Press and hold the button until the display screen turns on To turn the Parent unit off press and hold the button until the display screen turns off If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Using your BT Digital Video Baby Monitor 1000 27 Adjust the Parent unit loudspeaker volume You can adjust the loudspeaker volume from Volume 1 to Volume 7 or you can switch it off The default setting is Volume 4 When the loudspeaker volume is set to off the amp icon appears on the screen and the C light turns on 1 Press the GQ or is button on the Parent unit to increase or decrease the loudspeaker volume Zoom You can zoom in or out while viewing images transmitted from the Baby unit Zoom in or out in single CAM mode i 1 Press the 2 button to zoom in Use the ga ws H lt or ba button to move the zoomed image up down left or right 2 To zoom out again press
22. hase Alternatively you may find the answer in the Help section at the back of this guide Additional answers to Frequently Asked Questions are also available from www bt com producthelp Calls made from within the UK mainland network are free Mobile and international call costs may vary Got everything Baby unit Parent unit Rechargeable battery for your Parent unit 1 x battery compartment cover for your Parent unit 1 x power adaptor for your Parent unit item code 064761 e 1x power adaptor for your Baby unit item code 064785 Wall mounting bracket screws x2 and wall plugs x2 Important safety information e Your BT Digital Video Baby Monitor 1000 is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision Make sure the Baby unit Parent unit and mains adaptor cables are kept out of reach of your baby at least one metre away Never place the Baby unit inside your baby s cot bed or playpen e Never cover your Parent or Baby units e g with clothes towels or blankets e Never use or place your Parent or Baby units in moist places or near water If travelling abroad make sure that the voltage shown on the mains power adaptor corresponds to the local mains power before connecting to the power supply There is a risk of explosion if the batteries are replaced by an incorrect type Only use the supplied battery for the Parent unit
23. he product was purchased R amp TTE This product is intended for use within the UK This equipment complies with the essential requirements for the Radio Equipment and Telecommunications Terminal Equipment Directive 1999 5 EC Declaration of Conformance Hereby Vtech declares that this BT Digital Video Baby Monitor 1000 is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The Declaration of Conformance for the BT Digital Video Baby Monitor 1000 is available from www bt com producthelp User Guide formats This document is also available in other formats such as Large print Braille and Audio CD If you would like a copy please call 0808 100 6554 If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Offices worldwide The services described in this publication are subject to availability and may be modified from time to time Services and equipment are provided subject to British Telecommunications plc s respective standard conditions of contract Nothing in this publication forms any part of any contract British Telecommunications plc 2011 Registered Office 81 Newgate Street London EC1A 7AJ Registered in England No 1800000 Printed in China Designed and produced by The Art amp Design Partnership Ltd BT Digital Video Baby Monitor 1000 12 11 Issue 2 BT
24. manship of materials Products over 28 days old from the date of purchase may be replaced with a refurbished or repaired product The conditions of this guarantee are The guarantee shall only apply to defects that occur within the 12 month guarantee period Proof of purchase is required The equipment is returned to BT or its agent as instructed e This guarantee does not cover the batteries and any faults or defects caused by accidents misuse fair wear and tear neglect tampering with the equipment or any attempt at adjustment or repair other than through approved agents This guarantee does not affect your statutory rights Within the 12 month guarantee period Prior to returning your product please read the Help section beginning on page 43 or contact the BT Digital Video Baby Monitor 1000 Helpline on 0808 100 6554 for assistance Additional answers to Frequently Asked Questions are available from www bt com producthelp In the unlikely event of a defect occurring the Helpdesk will issue a Fault Reference Authorisation FRA number and instructions for replacement or repair Please note you will need the FRA number before returning the product This does not affect your statutory rights Outside of the 12 month guarantee period If your product needs repair after the guarantee period has ended or if you require technical assistance outside of the 12 month guarantee period please call BT s approved technical supp
25. nfirmation tone Parent unit screen brightness You can change the brightness of the Parent unit screen from between Level 1 to Level 5 The default setting is Level 3 1 Press B If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Parent unit settings menu 39 2 Press or gat highlight BRIGHTNESS then press or gt i v Vol 3 Press ea or gato select the brightness you want from Level 1 to Level 5 then press to confirm You will hear a confirmation tone Display language You can select the language to be displayed on screen English French or Spanish The default setting is English Press Vv Vol 2 Press MMB or gage to highlight LANGUAGE or LANGUE if French is set or IDIOMA if Spanish is set then press or gt 3 Press MB or gi to choose ENGLISH FRANCAIS Vol A or ESPANOL then press Ei confirm You will hear a confirmation tone p If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 40 Parent unit settings menu If pairing fails the screen will display Pairing failed Try the pairing procedure again If you pair a new Baby unit to an already occupied Baby unit slot it will unpair the current Baby unit Only one Baby unit can be paired at a time If you have any problems pairing or need additional cameras call us on 0808 100 6554 or go to www b
26. ort agent Discount Communications Ltd on 0800 980 8999 If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Returning your product If the Helpline is unable to remedy your problem they will issue a Fault Reference Authorisation number and ask you to return the product to your original place of purchase Where possible pack the product in its original packaging Please remember to include all parts including the power supply adaptors and the original batteries For guarantee purposes proof of purchase is required so please keep your receipt Product disposal instructions The symbol shown here and on the product means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life The Waste of Electrical and Electronic Equipment WEEE Directive 2002 96 EC has been put in place to recycle products using best available recovery and recycling techniques to minimize the impact on the environment treat any hazardous substances and avoid the increasing landfill General information 47 Product disposal instructions for residential users When you have no further use for it please remove any batteries and dispose of them and the product as per your local authority s recycling processes For more information please contact your local authority or the retailer where t
27. reen will display Battery low at Parent unit and the power and switch on The light on the front CH icon The light will of the Parent unit will turn on while the battery also flash and you will hear is charging a short alert beep You will need to recharge the Parent Fi y unit without interruption for approximately 30 minutes to give the Parent unit enough charge to use for a short time If the Parent unit is turned off during charging the battery Peol will charge more quickly WARNING LJ Only use the power adaptor 4 Leave the battery to charge continuously for 12 supplied Using an incorrect hours before you switch the Parent unit on When power adaptor could the battery is fully charged the light on the side of permanently damage ee our product the Parent unit will turn off E If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 18 Setting up Make sure the Parent unit and power adaptor cable are kept away from the reach of children You can charge the battery when the Parent unit is switched on but this will extend the charging time WARNING Do not mix old and new batteries Only use the recommended type of 4 AA batteries Using other types could permanently damage the unit Battery performance The operating time for using AA batteries is approximately 8 hours depending on light conditions and feature usage Therefore
28. s low Flashes red and green alternately when the Baby unit is in pairing mode r Vide Zo o Baby mow we Your BT Digital Video Baby Monitor 1000 Camera angle adjustment tab Pull to adjust the camera angle Light sensor J Press to play and stop lullabies Volume Press to increase or decrease the volume Skip Press to skip to the next lullaby Microphone If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Back of Baby unit Temperature sensor Speaker To listen to lullabies and parent s voice when Talk feature is used Power socket beneath the rubber cover D Your BT Digital Video Baby Monitor 1000 tA Antenna Battery compartment cover Threaded socket 6mm Used for the wall mounting bracket supplied or a tripod not supplied If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 9 10 Your BT Digital Video Baby Monitor 1000 Parent unit Link light On strong signal is detected between the Parent and Baby unit Flashing Parent unit cannot link to the Baby unit Off Parent unit is turned off Battery light On Parent unit battery is being charged Flashing Parent unit battery is low and needs charging Off Parent unit Power on off
29. sitivity level of the Baby Unit ee ceseeseeeeees 32 Room temperature monitor 33 Set the minimum room temperature 33 Set the maximum room temperature 34 Turn the temperature alert on or off 35 Set the temperature format 36 VID Fate sissscssscsssssscsensssscestedviecsndencssss 37 In this guide Sound activated screen sceeceeeees 38 Parent unit screen brightness 38 Display language ccscssseeseeeseees 39 Pair unpair CAM cesscccessseeeeseees 40 To pair a Baby unit to the Parent Umit erences isisisi 40 To unpair a Baby unit from the Parent unt lt csveedstssevsesesseotstvcdaareeaxbes 42 PIG a PEE E EE 43 General information 00068 46 CLEANING A E 46 Guararite so cssiccsscecsteecsnseessseesnbecasees 46 Product disposal instructions 47 RETTE cresen a a 47 Declaration of Conformance 47 User Guide formats c ssccseeeseeeees 47 If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 7i Baby unit The Baby unit is also referred to as a CAM camera in this guide Camera Infra red LEDs Back up light for night vision Power on off Press and hold to turn on or off Red light is on when the Baby unit is powered by batteries Green light is on when the Baby unit is powered by the power adaptor Flashes red when the Baby unit battery i
30. t and plug the other end into the mains power light on the button of the and switch on Baby unit will flash red You will need to replace the batteries Battery low warning WARNING Only use the power adaptor supplied Using an incorrect power adaptor could permanently damage your product Make sure the Baby unit and power adaptor cable are kept away from the reach of children If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 20 Setting up The Baby unit camera may be angled down by pulling the tab on top of the camera towards you Positioning and operating range Positioning We recommend you place the Baby unit between 1 2 metres away from your baby for best performance Make sure the unit and cable is out of reach of your baby Do not place the Parent and Baby units too close together as you will hear a high pitched noise this is normal The units are designed to be located at a distance from one another e g in separate rooms Operating range The operating range is up to 300 metres outdoors and 50 metres indoors The actual operating range may vary depending on the environmental conditions and other interferences such as walls doors and other obstructions The Baby unit may not detect sounds when the sensitivity level is set below a certain level so you may wish to increase the sensitivity level see page 32 You may also need to
31. t com mybabymonitor for more information Pair unpair CAM The Parent and Baby unit supplied are already paired but you can add or replace Baby units you purchase separately You can pair a maximum of four Baby units to your Parent unit Each new Baby unit must be paired to the Parent unit before you can use it To pair a Baby unit to the Parent unit Firstly make sure the Baby and Parent units are turned on see pages 25 and 26 Press on the Parent unit v Vol Press ES or to highlight PAIR UNPAIR CAM then press or gt Press K or i again to select Pair new CAM Vol v Press s or to choose a Baby unit slot then press B If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Parent unitsettingsmenu 41 i You have 60 seconds to 5 When the display shows Please press both complete the pairing process and amp keys on CAM side until POWER indicator oncetne Perens unit oispiay shows Please press both flashes Red and Green light press and hold the and keys on CAM side until POWER indicator flashes Red and B buttons for 5 seconds on the new and Greenlight Baby unit The light on the a button of the new Baby unit will flash red and green alternately 6 When pairing has been successful the screen will display the image from the newly paired Baby unit The light on the a button of the new Baby unit will turn red when i
32. t is powered by AA batteries or green when powered by the power adaptor If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 42 Parent unit settings menu uw To unpair a Baby unit from the Parent unit Firstly make sure the Baby and Parent units are turned on see pages 25 and 26 Press a 6 on the Parent unit Press Es or gato highlight PAIR UNPAIR CAM then press E or gt Vol Press eo gm to select Unpair CAM then press B Vol Press ae or QM to select the Baby unit you want to unpair then press eS When the display shows To unpair CAM from the system press key press the button When the display shows Press key to confirm press When unpairing has been successful the screen will display the image from the next paired Baby unit If there is no paired Baby unit the screen will display NO CAM paired If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Help If you have any problems setting up or using your BT Digital Video Baby Monitor 1000 firstly see the answers below to frequently asked questions If you still have difficulties call the Helpline on 0808 100 6554 My Parent and Baby units do not work at all e check that the power adaptor cables are inserted correctly into the Parent and Baby unit s and switched on at the wall sock
33. the button If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 28 Using your BT Digital Video Baby Monitor 1000 Multi CAM mode is not available if only one Baby unit is paired to the Parent unit View You can change the screen to view images from different Baby units if you have more than one Baby unit or you can turn the screen off To view different Baby units Press the button to select the Baby unit you want CAM 1 CAM 2 CAM 3 CAM 4 or multi CAM Zoom in or out in multi CAM mode if you have more than one Baby unit lol Use the gy al H lt or button to choose the Baby unit you want then press the or button Press the button again to zoom in Use the Vol v p oe Be H lt or ba button to move the zoomed Vol image up down left or right To zoom out again press the button To turn the screen on off Press and hold the button until the screen turns off To turn the screen back on press any button If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Using your BT Digital Video Baby Monitor 1000 29 Talk to the Baby unit The Talk feature will not work in multi CAM view mode You You can use the Parent unit Talk feature as a one will need to select a Baby unit way intercom to comfort and reassure your baby in single CAM
34. upport the weight of the product e the power adaptor will reach the power socket e you are not drilling into any hidden wiring or plumbing BT are not responsible for any damage injury caused while attempting to wall mount your product Wall mounting the Baby unit optional The Baby unit is ready for tabletop use but you can wall mount it using the wall mounting bracket supplied if you wish to Make sure you test the units see page 21 from the proposed position before wall mounting Place the wall mounting bracket against the wall where you want to wall mount the Baby unit and use a pencil to mark the top two holes as shown x ly Remove the wall mounting bracket and check the reception strength of the Baby unit and camera angle before drilling two holes in the wall using a 5mm drill bit If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Settingup 23 3 Align the wall mounting bracket and screws with the holes in the wall as shown Make sure you attach the screw in the middle hole first so that the wall mounting position is fixed then attach the other screw in the top hole If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 24 Setting up 4 Place the Baby unit onto the wall mounting bracket and tighten the screw into the threaded socket at the bottom to secur
35. y unit in single CAM or multi CAM mode If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp 32 Parent unit settings menu To briefly override the Sensitivity level sensitivity setting to hear all er sounds in baby s room for 15 You can change the sensitivity level of sounds seconds briefly press the being received from the Baby unit from Level 1 to button on the Parent unit Level 5 maximum The default setting is Level 3 The higher the sound sensitivity level is set the more sensitive the Baby unit is in detecting sounds transmitted from the Baby unit to the Parent unit If you want the Baby unit to be very sensitive in detecting sounds you may wish to set the sensitivity to Level 5 maximum so that the Baby unit will detect any sounds including background noises If you want it to be less sensitive in detecting sounds you may wish to set the sensitivity to a lower level Level 1 4 so that the Baby unit will transmit sounds to the Parent unit only when your baby is making a noise The Baby unit s must be turned To set the sound sensitivity level of the Baby unit onin order to enter the sensitivity menu of the Parent unit 1 Press ey Vol 2 Press vo Or RB to highlight SENSITIVITY then press or gt If you experience any problems please call the Helpline on Freephone 0808 100 6554 or visit www bt com producthelp Vv Vol 3 Press

Download Pdf Manuals

image

Related Search

Related Contents

  Service Manual of CG935G Wheel Loader  Valueline VLAB22050B10  廃棄物情報の提供に関するガイドライン  Philips 19IN 109B60 REAL FLAT  Before beginning assembly, please read these instructions  1800 Library Upgrade to 8100 Drives Plasmon Technical Information  Mise en page 1 - Esec  3. - Nespresso  

Copyright © All rights reserved.
Failed to retrieve file