Ion401 Manual v2.1
Contents
1. ionmax TOWER IONIC AIR PURIFIER ION401 i 441 4 USER MANUAL INDEX IMPORTANT SAFETY INSTRUCTIONS FEATURES OPERATING THE ICONIC AIR PURIFIER GETTING STARTED CONTROLS SETTINGS MODES OF OPERATION TROUBLESHOOTING CLEANING AND MAINTENANCE CLEANING THE DUST COLLECTION BLADES INSERTING THE DUST COLLECTION BLADES CLEANING THE IONISING WIRES WARRANTY WARRANTY REGISTRATION COON N O IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING IMPORTANT INFORMATION Please exercise caution when operating this appliance Please read the warnings below to prevent any chance of electric shock injury fire hazard or damage Do not use the unit outdoors e Use only the voltage which has been specified suitable for this product Do not let children operate the unit without adult supervision e Always disconnect this product from its power supply before removing internal parts for cleaning e Do not touch any parts within the product during operation e Do not open the casing of this product doing so could cause injury and nullify warranty Never wash the product with water or touch it with wet hands Do not use the product in bathrooms humid areas fireplaces or place it in proximity to flammable or combustible products Do not use ionic air purifier in the kitchen Airborne oil cooking may follow air circulation into the prod2. ONS Inserting the Dust Collection Blades After your blades are clean and dry vertically re insert the blades into their correct position as show in Figure 4 Note if you use a combination of water and a cleaning product you must wait at least 24 hours for the blades to completely dry Cleaning the lonising Wires Each strand of ionising wire is equipped with a dust removal mechanism and must be cleaned once a week or when the unit becomes noisy 1 Lift the Cleaning Rod see Figure 4 Part C 2 Pull the Cleaning Rod up and push it down several times to remove the dust on the lonising Wires 3 Return the Cleaning Rod to its original position by lightly pushing it into place WARRANTY DETAILS andatech WARRANTY DETAILS Congratulations on your purchase It is our aim to provide you with quality products that you can trust Our products come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or a refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure The Guarantee The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from date of purchase for domestic use and 3 months for commercial use Defects that occur withi
3. es Sliding Lock Button OPERATION Getting Started 1 Place this product on a level surface and choose a proper power outlet referring to safety instructions to ensure safe conduct 2 Position your ION401 at least 30cm away from the wall 3 Connect it to the power supply Your ION4OT is now ready for operation Cleaning Required Light High Output Indication Light Medium Output Indication Light Low Output Indication Light On Off Button CONTROLS SETTINGS ON OFF Button Turns unit on and off HI This indicates that the unit is in high operation mode e MED This light indicates that the unit is in medium operation mode with 20 second intervals of rest between every 20 seconds of operation e LO This light indicates that the unit is in low operation mode with 80 second intervals of rest between every 20 seconds of operation Cleaning Indicator If the red light comes on this is an indication that your ION401 needs be cleaned or it is experiencing other problems Please refer to the troubleshooting section of this manual for details HI gt MED LO MODES OF OPERATION Press the ON OFF button to activate the unit and select your preferred mode of operation Your IONAOT starts in HI operation mode by default Pressing the ON OFF button cycles the mode from HI to MED to LO and ON OFF DESCRIPTION This economic mode is suitable for small rooms This mode i
4. f parts tampering or attempted repair by a person not authorised by the distributor e Any product that has been damaged by a lightning strike either directly or indirectly or a mains power surge or liquid ingress e The product if it is located outside of Australia e Any damage caused by improper power input or improper cable connection 1 Andatech Corporation Pty Ltd YEAR PO BOX 3038 Nunawading VIC 3131 WARRANTY Phone 1300 800 200 Fax 1300 883 802 Email info andatech com au WARRANTY REGISTRATION Register your warranty at my andatech com au OR Simply fill out this form and post it with a copy of the receipt to Andatech Corporation Pty Ltd PO Box 3038 Nunawading VIC 3131 Australia Product lonmax lon401 Date of purchase Place of purchase pene Surname Address Suburb andatech ionmax gt wellness energised for life andatech wellness www ionmax com au 1300 800 200 Version 2 1 Updated 14 08 2015
5. ly indicates that it needs to be cleaned Caution e Always disconnect this product from its power supply before detaching or installing any parts e The Dust Collection Blades cannot be detached without first releasing the lock Do not use excessive force to pull out the blades to prevent damaging the product To prevent damaging the unit always allow the dust collection blades to dry thoroughly before re inserting into their original position in the unit Recommendations In order to keep the unit working properly we highly recommend the following measures e Clean the Dust Collection Blades once every 3 to 4 days e Clean the lonising Wires once a week or when the unit becomes noisy If your ION401 operates a heavily polluted environment make sure to clean it more frequently CLEANING INSTRUCTIONS Cleaning the Dust Collection Blades 1 Hold the handle as shown in Figure 1 following page 2 Next pull the sliding lock button see Figure 2 part B and lift the handle gently upward see Figure 2 part A 3 Place the blades on the ground or floor leaving them for 10 minutes to discharge any static currents 4 Wipe away the trapped particles on the blades with a damp sponge or cloth Mild detergent and water may be used if necessary Note If detergent and water are used you must wait at least 24 hours for the blades to dry completely 5 Leave your unit to dry for 2 to 3 hours CLEANING INSTRUCTI
6. n this warranty period under normal use and care will be repaired replaced or refunded at our discretion solely at our option with no charge for parts and labour The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Trade Practises Act and similar state laws Proof of Purchase This warranty is valid for the original purchase and is not transferable Please keep your purchase docket or receipt as proof of purchase and as proof of date on which the purchase was made The purchase docket or a copy or receipt must be presented with the warranty when making a claim under this warranty Service during the Warranty Period Please ensure that the RA Return Authorization Number is clearly stated on the outside of the packaging Don t have one Email us at Support andatech com au or call us on 1300 900 200 Please ensure the product is properly packaged to ensure that no damade occurs during transit Extent of Warranty This warranty is limited to defects in workmanship or parts All defective products or parts will be repaired or replaced This warranty does not cover manuals and packaging Normal Wear and Tear This warranty does not cover normal wear and tear to the product or parts Exclusions This warranty does not cover Any defect caused by an accident misuse abuse improper operation lack of reasonable care unauthorised modification loss o
7. s most suited to medium sized rooms with frequently closed windows HI delivers the most negative ions making it suitable for larger rooms Note if the unit is not cleaned for a long period of time the Cleaning Required light will turn red and the unit will shut down automatically TROUBLESHOOTING Problem Indication light is not lit Red light is lit Unit is noisy Possible Cause e Power cord is connected properly e The ON OFF button has not been correctly pressed Dust Collection Blades are not installed properly Too much dust has been accumulated inside the unit Collection blades are jarred or have been removed suddenly e Short circuiting may have occurred Too much dust has accumulated inside the unit Internal parts are wet Trouble shooting Check if plug is loose e Press the ON OFF button to ensure unit is switched on e Re insert dust collection blades following instructions e Clean the unit according to instructions Remove and re insert dust collection blades and press ON OFF button to reset e Press ON OFF button to reset e Clean the unit according to instructions If operating the unit under humid conditions turn it off and wait for it to dry until resuming operation CLEANING amp MAINTENANCE This ION401 runs quietly and produces clean fresh and healthy air If your product becomes noisy this general
8. uct leaving oil and dust residues on the unit and its surrounding area Do not pull the handle of Dust Collection Blades with force without first releasing the lock to prevent damaging the product e Never operate the ionic air purifier if the plug or cord is damaged Please contact authorized distributor or qualified personnel to replace the damaged parts e Always turn off and unplug this product when not in use over a long period of time Please hold the secured portion of the plug and remove it from the outlet gently Do not place the power cord near any heat sources e Keep yourself at a safe distance while the unit is running to prevent hairs fingers clothing and accessories from getting into the unit e Please ensure that the plug has a proper grounding system e Please check the product and clean dust regularly to prevent excessive deposits from setting off sparks and causing fire This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance SAVE AND READ THESE IMPORTANT SAFETY INSTRUCTIONS FEATURES A Cleaning Rod F B Control Panel G C Casing H D Power Cord E Base C D Dust Collection Blad
Download Pdf Manuals
Related Search