VS-125 - Security & Self Defense
Contents
1. VS 125 Wireless Camera Hunter 1 2GHz 2 4GHz 5 8GHz Full band video scanner User s Manual Thank you for purchasing the Wireless Camera Hunter Please first read over this manual for proper use save this manual and keep it handy General This new breakthrough video scanner covers three frequency bands 1 2 GHz 2 4 GHz 5 8 GHz The unique 5 8 GHz scanning technology makes this device the only one of its kind This detector detects and displays multiple hidden wireless cameras in multiple frequency bands up to 300 feet depending on output power of source transmitter It scans 1 2 GHz 2 4 GHz and 5 8 GHz three frequency bands synchronously in 30 seconds Specially designed for easy and simple use Does not require complicated installation or any professional knowledge Earphone output Video 4 system indication Scan stop switch Video output Fine tune tuner Band selection aad AV output of screen displa vee jack ey indication Detected canning Speaker band eee lt left side gt lt right side gt indication Image lock indication INCLUDES Video Scanner 3 x Detachable SMA Antenna External Power Adaptor 3x AV output cable Rugged Carrying Case 1 6 How to operate 1 Turn on the power switch and this device will There are 3 rows red LED in the below There are 3 sets of Image lock and indication in The Video system indication green LED wil2. frequency bands 1 Acoustic display 2 Silent detection through earphone 1 2GHz 2 4GHz 5 8GHz three bands synchronous scanning 1 Auto band switching 2 Band selection switch for manual band change 1 2GHz band 6 0 MHz gt 6 5 MHz gt 5 5 MHz 2 4GHz band 6 0 MHz gt 6 5 MHz 5 5 MHz 5 8GHzband 6 0 MHz gt 6 5 MHz AV outputs x 3 for 3 bands synchronous recording with 3 5mm Video Audio output jack x 3 for recording Up to 300 feet depending on output power of source transmitter The detecting distance will be varied depending on the type and output power of signal sources Specification may change without notice Unauthorized repair or disassembly of this device will void all the warranties Avoid water Do not store this device in an excessively hot place Avoid knocks or dropping this device WARNING Use this device as an auxiliary supplemental help or aid to prevent the risks caused by video signal transmission This device does not take the place of all the supervisions Performance of this Radio frequency RF product will be affected by the circumstance of use The producer and marketing group accepts no liability for any loss or damage by malfunction or misuse No part of this manual may be reproduced transmitted transcribed or translated into any language in any form by any means electrical or mechanical including photocopying recording or information and retrieval systems without the expre
3. R a TEL Ce EE EE oe tT 6 Low battery warning When the battery low indication lights on it means the battery is running down Please connect the switching power adaptor to recharge the battery and this device will keep detecting It will take about 36 hours to full charge the battery if this device is working power ON It will takes only 8 hours to full charge the battery if this device Is power OFF if you are not going to use this device for a long time please check the battery power every 2 3 months If the battery runs down connect the AC adaptor to recharge the built in rechargeable battery for eight 8 hours This will ensure longevity of the battery and also prevent damage to unit due to battery deterioration Notice of use ois Specifications Dimension Weight Power Battery life Detecting Frequency Monitor Scan indication 1 Scan indication 2 Warning mode Scanning band Monitor display Audio demodulation Audio Video output Detecting Distance L19xH 14x T4cm antenna length not included about 860g including rechargeable battery 1 Switching power adaptor 2 Built in rechargeable battery Normal mode about 40 minutes after full charge Power saving mode about 70 minutes after full charge 1 2GHz 2 4GHz 5 8GHz three frequency bands 3 5 High resolution LCD Color or B W camera compatible NTSC or PAL SECAM Video format indication Scanning LED indication x 3 for 3
4. camera signal in other band the screen will appear the image Band selection Press the Scan Stop button of the correspondent a band once to latch the second detected image and the red Lock LED will light up 13 The scanning indication red LED of the second locked band will stop moving the scanning indication red LED of other unlock band will keep shuttling to and fro 14 This device can lock the image of the 3 frequency bands at the same time 2 POWER SAVING MODE Press and hold the Band selection button and then turn on the power VS 125 will enter power saving mode The LCD screen will first light up in blue then light off When VS 125 detects video signals the LCD screen will light up and display the caught video image Press band selection switch to shift and watch the screen image of different frequency bands Audio Video Output There are 3 AV output jack in the right side Connect the A V output cables with DVR to record the scanned audio and video signal of the 3 frequency bands individually The DVR should have audio input to enable the audio output tuners for adjusting the output video image of the 3 frequency bands in order to match the connected lt right side gt DVR recording And only the displayed frequency band could pansa record the audio a AV output In the upper side of the AV output jack there are 3 Video jack LCD monitor control buttons There are 4 but
5. l light up at NTSC This device might need a short time to warm up under cool weather If the screen appears verticle lines when switch on please wait several seconds then it will become normal after warm up start auto scanning of the screen they are Scanning indication The red LED of scanning indication will shuttle to and fro showing the scanned frequency division When this device detects a wireless camera signal the correspondending Band indication yellow LED will light up and the screen will show the image the right side of the screen LOCK NTSC PAL SECAM Press the Scan Stop button of the correspondent band once to latch the image and the red Lock LED will light up 1 2G SCAN STOP The scanning indication red LED row of the locked band will stop moving but the scanning indication red LED row of other unlock bands will keep shuttling to and fro or PAL SECAM to indicate the detected signal is NTSC or PAL SECAM Fine tune If the wireless camera also sending audio signals the speaker will play the sounds Band selection of screen _ Press Fine tune buttons to adjust the screen image display 10 The Band indication yellow LED will stay at the locked band and the screen will show the image of lock band 2 6 Ag V2 Press the band selection button to shift the screen to other unlocked band If this device detects wireless Fine tune
6. ss written permission of manufacturer Products mentioned in this manual are for identification purposes only All brand names appearing in this manual may or may not be registered trademarks or copynghts of their respective companies The manufacturer reserves the right to change or modify the specifications of any one or all of these products as deemed necessary at any time without pror notification The manufacturer may further revise this manual from time to time without prior notice Copyright 2001 2010 All nghts reserved Made in Taiwan C VS125PK1B 09 2010 9 6 NOTICE OF BATTERY 1 When the battery runs down If the switch still keeps at on the battery will be over discharged and will damage the battery Please set the on off Switch at off and connect the power adaptor to charge this unit for 8 hours 2 Battery will be over charged if you keep on charging it without using that will also damage battery The producer and seller accept no liability for the damage caused by the over discharge or charge External battery for longer operation of VS 125 An extra battery cable for user to connect a 12V battery to extend the operation time Reference information of 12V battery http www vuasa com tw _enalish 03_vrla Q1_list php TID 1 Approx operation time of VS 125 Inside 12 0 7 40 min 70 min Battery ea 28 aom O o puesta e e am O o 6 6
7. tons in the left side of front view Power Menu Down Up 1 Press POWER to switch Off On the LCD monitor 2 Press MENU Key get into OSD On Screen Display control Contrast Brightness Hue Color Sharpness Volume 3 Press UP and DOWN to increase or decrease the setting 3 6 Audio demodulation 1 This device has audio demodulation covering the most popular frequencies The available audio demodulation frequencies are as follows i Wireless camera Audio frequencies NO Frequency band 6 0 MHz 6 5 MHz 5 5 MHz 1 aG V default V V 2 2 4 GHz V default V V gt B GHZ V V default X 2 When this device detects wireless camera signals hold the Band selection button and press the Scan stop switch of selected band 1 2 GHz or 2 4 GHz or 5 8 GHz once to shift the frequency of audio demodulation 3 For example the default audio demodulation of 1 2 GHz band is 6 0 MHz after above step 2 it will shift to 6 5 MHz Repeat the step 2 the audio demodulation will shift to 5 5 MHz Then back to 6 0 MHz gt 6 5 MHz gt 5 5 MHz in a cycle The audio demodulation of 5 8 GHz band has 2 frequencies only 6 5 MHz and 6 0 MHZ 4 After turn off the power of this device the audio demodulation will return to the default frequency Hold the Band selection button and press the Scan stop switch of selected band once to shift the frequency of audio demodulation 4 6 a R
Download Pdf Manuals
Related Search