230V Submersible Water Pumps
Contents
1. CONTACTS DRAPER TOOLS LIMITED Hursley Road Chandler s Ford Eastleigh Hampshire 5053 1YF U K Helpline 023 8049 4344 Sales Desk 023 8049 4333 Internet www drapertools com E mail sales drapertools com Sales Fax 023 8049 4209 General Enquiries 023 8026 6355 Service Warranty Repair Agent For aftersales servicing or warranty repairs please contact the Draper Tools Helpline for details of an agent in your local area YOUR DRAPER STOCKIST KCKC260115 INSTRUCTIONS FOR 230V Submersible Water Pumps Stock Nos 61584 61621 61667 61668 Part Nos SWP200 SWP170DW SWP210DW SWP112 IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT Stock No 61667 shown GENERAL INFORMATION These instructions accompanying the product are the original instructions This document is part of the product keep it for the life of the product passing it on to any subsequent holder of the product Read all these instructions before assembling operating or maintaining this product This manual has been compiled by Draper Tools describing the purpose for which the product has been designed and contains all the necessary information to ensure its correct and safe use By following all the general safety instructions contained in this manual it will ensure both product and operator safety together with longer life of the product itself All2. GUARANTEE 3 1 GUARANTEE Draper tools have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship Should the tool develop a fault please return the complete tool to your nearest distributor or contact Draper Tools Limited Chandler s Ford Eastleigh Hampshire 5053 1YF England Telephone Sales Desk 023 8049 4333 or Product Helpline 023 8049 4344 A proof of purchase must be provided with the tool If upon inspection it is found that the fault occurring is due to defective materials or workmanship repairs will be carried out free of charge This guarantee period covering parts labour is 12 months from the date of purchase except where tools are hired out when the guarantee period is ninety days from the date of purchase This guarantee does not apply to normal wear and tear nor does it cover any damage caused by misuse careless or unsafe handling alterations accidents or repairs attempted or made by any personnel other than the authorised Draper warranty repair agent Note If the tool is found not to be within the terms of warranty repairs and carriage charges will be quoted and made accordingly This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the gua
3. by the manufacturer A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack b Use power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire c When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals together may cause burns or a fire d Under abusive conditions liquid may be ejected from the battery avoid contact If contact accidentally occurs flush with water If liquid contacts eyes additionally seek medical help Liquid ejected from the battery may cause irritation or burns 6 Service a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained 5 HEALTH amp SAFETY INFORMATION 5 2 ADDITIONAL SAFETY INSTRUCTIONS FOR SUBMERSIBLE WATER PUMPS When carrying or lifting the submersible pump always use the transport handle DO NOT carry or lift using the power cable or float switch cable Before connecting to the power supply Aresidual current circuit breaker RCD must be used for all applications Draper Stock No 69307 or 89301 The electrical supply should be the same as that stated on t
4. damage to the pump or its power supply cable can be safely rectified prior to next use The pump should be protected from frost do not allow any residual water to freeze inside the pump as irreversible damage will occur 16 4 INTRODUCTION 4 1 SCOPE This instruction booklet covers two 230V submersible dirty water pumps which ideally suited for general irrigating draining inspection pits trenches and footings where solids may be present Maximum solid passable by the dirty water pumps is 30mm Also covered by these instructions is two clear water pump ideally suited for pumping clear water from pools and garden ponds where the water is free of debris However this pump also has the capabilities of passing solids of up to 3mm 4 2 SPECIFICATION Stock 61584 wai 61621 uuu 61667 iinniinen 61668 Part eg SWP200 SWP170DW SWP210DW SWP112 Pump Usage Clear Water Dirty Water Dirty Water Clear Water Float Switch jc YOS iie idis ple Yes Motor Rated voltage 230V 230V Rated frequency tni uie 50Hz Rated INPUT irte 550W Max particle size 3mm Output aperture size 25mm 32mm 25mm 32mm 25mm 32mm 25mm 32mm stepped adaptor ste
5. photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product Whilst every effort has been made to ensure the accuracy of information contained in this manual the Draper Tools policy of continuous improvement determines the right to make modifications without prior warning 1 TITLE PAGE 1 1 INTRODUCTION USER MANUAL FOR 230V SUBMERSIBLE WATER PUMPS Stock nos 61584 61621 61667 61668 Part no SWP200 SWP170DW SWP210DW SWP112 1 2 REVISIONS Date first published January 2015 As our user manuals are continually updated users should make sure that they use the very latest version Downloads are available from http www drapertools com b2c b2cmanuals pgm DRAPER TOOLS LIMITED WEBSITE www drapertools com HURSLEY ROAD PRODUCT HELPLINE 44 0 23 8049 4344 CHANDLER S FORD GENERAL FAX 44 0 23 8026 0784 EASTLEIGH HAMPSHIRE 053 1YFUK 1 3 UNDERSTANDING THIS MANUALS SAFETY CONTENT WARNING Information that draws attention to the risk of injury or death CAUTION Information that draws attention to the risk of damage to the product or surroundings 1 4 COPYRIGHT NOTICE Copyright O Draper Tools Limited Permission is granted to reproduce this publication for personal amp educational use only Commercial copying redistribution hiring or lending is prohibited N
6. BMERSIBLE WATER PUMPS 8 5 4 CONNECTION TO THE POWER SUPPLY tcrtio terii enne 8 6 TECHNICAL DESCRIPTION 53 IDENTIFICATION 6 2 COMPONENT DESCRIPTIONS 7 UNPACKING amp CHECKING 7 1 uet cm 7 2 WHAT S IN THE BOX 8 READYING THE PUMP 81 INSTALLAMON I TS scatet etae Rede ey alent 12 9 INSTALLING THE PUMP 9 1 PREPARATION AND INSTALLATION eene 13 9 2 PLACEMENT s 13 9 3 FLOAT SWITCH ADJUSTMENT 2 Sess cece reo cece EERE 13 10 OPERATING THE PUMP ccccsessecssssessesseeseesecsussueeseesscssesnseuseneeneeseeseeseesuseneeueeneesnesneseeeees 14 10 1 CONNECTING TO POWER VIA RCD rni ptr rr Cette 14 10 2 SWITCHING ON THE PUMP cci ipee rp tnter epe nte attt tereti 14 10 3 PUMPING DISTANCES AND VOLUMES sese 14 11 TROUBLESHOOTING 11 1 TROUBLESHOOTING CHECKLIST cre 15 12 MAINTENANCE 12 1 CLEARING OBSTRUCTIONS FROM IN THE IMPELLER HOUSING 16 12 2 GENERAL MAINTENANCE AND STORAGE eee 16 13 EXPLANATION OF SYMBOLS 13 1 EXPLANATION OF SYMBOLS ei ee 17 14 DISPOSAL 141 DISPOSA Sistemas nU rms 18 DECLARATION OF CONFORMITY 2 aita pees oir erro nocte tope arie tenete ENCLOSED 3
7. E PUMP FIG 4 On switching on your socket the pump will begin to operate if water level high enough to operate the float switch The pump will begin to expel the water via your hose and once the water level drops to the required level the float switch 4 will automatically switch off the pump Note Stock No 61668 is not supplied with a float switch 10 3 PUMPING DISTANCE AND VOLUME FIG 5 Fig 6 provides a guide for volumes pumped in relation to hose height Horizontal pumping distance is directly affected by the working head height Maximum head height minus actual working head height x factor of 10 equals the approximate horizontal pumping distance in metres using solid delivery hose For example Model SWP200 maximum head height is 9 5 metres minus actual working head height of 5 metres 4 5 metre x factor of 10 is 45 metres approximate pumping distance SSY 14 5 HEALTH amp SAFETY INFORMATION f Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts 9 If devices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used Use of dust collection can reduce dust related hazards 4 Power Tool Use And Care a Do not force the power tool Use the correct power tool for your application The correct power tool wi
8. ET IMPELLER HOUSING This is where the water to be pumped enters the machine The impeller is mounted in the top section of the housing 10 7 UNPACKING amp CHECKING 7 1 PACKAGING Carefully remove the pump from the packaging and examine it for any sign of damage that may have happened during shipping Lay the contents out and check them against the parts shown below If any part is damaged or missing please contact the Draper Helpline the telephone number appears on the Title page and do not attempt to use the pump The packaging material should be retained at least during the guarantee period in case the machine needs to be returned for repair Warning Some of the packaging materials used may be harmful to children Do not leave any of these materials in the reach of children If any of the packaging is to be thrown away make sure they are disposed of correctly according to local regulations 7 2 WHAT S IN THE BOX As well as the pump there may be several parts not fitted or attached to it 3 Outlet 2 Stepped 25mm 32mm output adaptor Applicable to 61621 and 61667 models only Cut off 25mm section at dotted line to use full 32mm bore option 32mm layflat hose must be used
9. chine s rating plate are compatible with the power supply you intend to connect it to 5 3 CONNECTION TO THE POWER SUPPLY This machine comes supplied with a UK standard 3 pin plug fitted It is designed for connection to a domestic power supply rated at 230V AC This product is a Class 1 machine meaning it must have an earth connection in the power supply This is to prevent electrocution in the event of a failure Apart from replacing the fuse in the plug no other electrical work is recommended on this machine 9 INSTALLING THE PUMP 9 1 PREPARATION AND INSTALLATION WARNING DO NOT MAKE ANY OF THE FOLLOWING ADJUSTMENTS WITH THE PUMP CONNECTED TO THE POWER SUPPLY CAUTION Whilst the two dirty water submersible water pumps Stock Nos 61621 and 61667 covered in these instructions are all capable of passing suspended solids of varying size it is important to check the maximum particle size listed in the specification section on page 5 for your own particular model The clear water submersible pumps Stock Nos 61584 and 61668 are designed to pump clear water only Ensure all loose stones gravel etc are removed from water prior to using this pump Ingestion of solids larger than 3mm will cause damage to the pump 9 2 PLACEMENT FIG 1 This pump must be placed on a stable level surface away from any loose stones or other objects that could get sucked into the pump accidentally 9 3 FLOAT SWITCH ADJUSTMENT FIG 2 Stoc
10. cted situations 11 TROUBLESHOOTING 11 1 TROUBLESHOOTING CHECKLIST Pump running but not delivering water Pump stops running due to thermal overload coming into operation POSSIBLE CAUSE Faulty power supply Power supply fuse blown Residual current circuit breaker tripped Water level under the minimum pumping level Filter inlet clogged Outlet tube clogged Hose flat Voltage supply different to rating plate A solid has jammed in pump The pump is operating in hot water The pump ran dry REMEDY This should be replaced immediately by a qualified person Replace the fuse Check and reset Raise the water level where possible Clean inlet Remove tube and clear obstruction Re install the pump but at an angle when submerged gently shake while outlet tube is open Switch on off repeatedly Remove plug from power supply Remove obstruction Allow pump to cool then restart Wait for pump to cool then submerge before switching on 15 10 OPERATING THE PUMP Once you have the pump safely situated and the float switch adjusted if required you are ready to turn on the pump 10 1 CONNECTING TO POWER VIA RCD FIG 3 Plug your pump into a Residual Current Device RCD 4 such as Draper Stock No 69307 or 89301 9 and 8 connect to your mains supply D RCD s sold separately 10 2 SWITCHING ON TH
11. e the risk of electric shock When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock If operating a power tool in a damp location is unavoidable use a residual current device RCD protected supply Use of an RCD reduces the risk of electric shock Personal Safety a b c d e Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool while you are tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Use personal protective equipment Always wear eye protection Protective equipment such as dust mask non skid safety shoes hard hat or hearing protection used for appropriate conditions will reduce personal injuries Prevent unintentional starting Ensure the switch is in the off position before connecting to power source and or battery pack picking up or carrying the tool Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents Remove any adjusting key or wrench before turning the power tool on A wrench or a key left attached to a rotating part of the power tool may result in personal injury Do not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpe
12. follow all instructions listed below may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool 1 Work area safety 2 3 a b c Keep work area clean and well lit Cluttered or dark areas invite accidents Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep children and bystanders away while operating a power tool Distractions can cause you to lose control Electrical Safety a b c d e f Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electrical shock Avoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increas
13. he rating plate Submersible water pumps should always be transported stored and submersed vertically Always ensure that your hands are dry when connecting and disconnecting the power supply Never operate the pump below the top of the water inlet The area being pumped should be kept clear nobody should enter the area while pump is operating Do not pump explosive or flammable liquids Important please read before use The following additional instructions must be followed at all times Failure to do so could invalidate the guarantee of this submersible water pump The float switch must be clamped in position using the cable clamp recess NOTE The pump should be suspended using a rope chain or stood on a brick to prevent any gravel etc being sucked into the pump and damaging the impeller Ifthe pump fails to operate disconnect from mains supply Remove the base see page 9 and gently turn the impeller using a screwdriver Check for obstruction in the impeller i e stones gravel etc The float switch fitted to the pump is NOT suitable for continuous use as an ON OFF switch Ifthe power cable becomes damaged it must be changed by the manufacturer or it s service agents IMPORTANT Any pump returned to Draper Tools Limited under warranty must be clean If a pump is received that has NOT been cleaned it will be returned to you at your cost Make sure the power supply information on the ma
14. k Nos 61584 61621 and 61667 only Once the pump has been located on a suitable surface you can choose to adjust the height at which the float switch 4 operates to switch on off the pump To adjust the height at which the float switch operates you will need to clip the connecting cable of the float switch into the moulded in clamp in the side of the pumps carry handle 1 allowing the required amount of travel for the float switch to operate the pump at your required water levels Connect your lay flat hose to the pumps outlet and route your hose to your required destination Ensure that all hose connections are secure before proceeding CAUTION This pump is not designed to be used in any continuous running applications such as water circulation water features etc To do so would invalidate the pumps warranty 13 8 READYING THE PUMP 8 1 INSTALLATION OF PARTS Before first use it is important to carry out a visual check of the product to ensure that the product has not suffered any transit damage and is safe to use To connect the hose adaptor simply screw it into its threaded housing To adjust the stepped hose adaptor for your chosen size of lay flat hose check the internal dimensions of your lay flat hose and select either the 25 or 32mm section of the stepped adaptor to connect your hose to To gain the full benefit of the increase in flow rate that can be achieved with the larger hose stepped adaptor a
15. ll do the job better and safer at the rate for which it was designed b Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired c Disconnect the plug from the power source and or the battery pack from the power tool before making any adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally d Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users e Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tools operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools f Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control g Use the power tool accessories and tool bits etc in accordance with these instructions taking into account the working conditions and the work to be performed Use of the power tool for operations different from intended could result in a hazardous situation 5 Battery tool use and care a Recharge only with the charger specified
16. o part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited In all cases this copyright notice must remain intact NOTES 19 14 DISPOSAL 14 1 DISPOSAL Atthe end of the machine s working life or when it can no longer be repaired ensure that it is disposed of according to national regulations Contact your local authority for details of collection schemes in your area In all circumstances Do not dispose of power tools with domestic waste Do not incinerate Do not abandon in the environment Do not dispose of WEEE as unsorted municipal waste Waste Electrical amp Electronic Equipment 18 2 1 CONTENTS PAGE CONTENT PAGE 1 TITLE PAGE 1 1 INTRODUCTION 2 1 2 REVISION HISTORY scsi ETE 2 1 3 UNDERSTANDING THIS MANUAL eese 2 1 4 COPYRIGHT NOTICE eee 2 2 CONTENTS 2 1 CONWTENITS 5 nier inerenti eine 3 3 GUARANTEE 3 1 eU vMgc e rC 4 4 INTRODUCTION 4 1 SCORE neun gu mut in Ms 4 2 SPECIFICATION 4 3 HANDLING amp STORAGE 5 HEALTH amp SAFETY INFORMATION 5 1 GENERAL SAFETY INSTRUCTIONS 5 2 iret terere trei iren 6 5 2 ADDITIONAL SAFETY INSTRUCTIONS FOR SU
17. pertures it will be necessary to remove the unused smaller section of the stepped adaptor see page 11 and this is best accomplished with a small hacksaw sawing through the threaded area will reveal the 32mm bore applicable to 61621 61667 models only NOTE The adaptor can now only be used with a 32mm hose and cannot be used with a 25mm hose 25mm adaptors are available quote Stock No 62877 Your chosen hose should be secured with a suitable retaining clip The float switch should be allowed to move freely without any restrictions The float switch can be set to turn the pump on off at differing water levels this will be covered in the following section of this manual 6 TECHNICAL DESCRIPTION 6 1 IDENTIFICATION Stock No 61667 shown Carry handle Stepped adaptor Outlet Float switch Excludes Stock No 61668 Main pump body motor housing 08YO 6 Water inlet impeller housing 10M power cable 6 TECHNICAL DESCRIPTION 6 2 MAIN COMPONENT DESCRIPTIONS The CARRY HANDLE for ease of transportation The STEPPED HOSE ADAPTOR allows the use of 25 and 32mm hoses The WATER OUTLET Pumped water is expelled from this aperture The PLUG connects the machine to your power supply The FLOAT SWITCH Excluding Stock No 61668 will switch the pump on off automatically at set water levels user adjustable The MAIN PUMP BODY houses the pumps motor it should be submerged in use to help cool the motor The INL
18. pped adaptor stepped adaptor stepped adaptor Max flow 191L min 166L min 200E mini eee 108L min Max head height 8 50 cR 7M Max operating depth 5M isi 5M Max water temperature 357C 357C Min water level for operation 80mm 130mimi iis T3OFUT eiie 80mm Float switch cut in height 380mm 410mm 380mm Float switch cut out height 170mm iine 200mim 200mm 170mm Power cable length 10M TOM nene 10M A BOKO i cereo cens GIKO ni 4 69kg Degree of protection against moisture IPX8 een ERR IBX8 iai IPX8 eed IPX8 Warning These products must be used in conjunction with a residual current device RCD 4 3 HANDLING amp STORAGE This submersible pump is designed to be moved to different locations Ensure it is always operated on a level surface Note Max particle size of 30mm requires the 25mm section of hose barb to be removed cut off to reveal 32mm bore 8 HEALTH amp SAFETY INFORMATION 5 1 GENERAL SAFETY INSTRUCTIONS General Power Tools Safety Warnings N WARNING Read all instructions Failure to
19. rantee period Please note that this guarantee is an additional benefit and does not affect your statutory rights Draper Tools Limited 13 EXPLANATION OF SYMBOLS 13 1 EXPLANATION OF SYMBOLS WEEE Do not dispose of Waste Electrical amp Electronic Equipment in with domestic rubbish 17 12 MAINTENANCE WARNING For your own safety remove the plug from the power supply before maintaining your submersible water pump 12 1 CLEARING OBSTRUCTIONS IN THE IMPELLER HOUSING FIG 6 If the impeller becomes blocked or obstructed remove the lower housing 6 2 By removing the securing screws 6 3 Remove any foreign objects and then re fit making sure that the rubber sealing o ring does not get damaged or pinched in the process If at any time the impeller is found to be damaged have it replaced immediately at your Draper warranty repair agent 12 2 GENERAL MAINTENANCE AND STORAGE Flush your pump through with fresh clean water from time to time if it is left idle in water for some time Draper recommends that if the pump is not to be used for some time that the pump is removed from the water It should be flushed through with fresh clean water to remove any dirty water that may remain inside the pump Clean the outside of the pump and dry with a cloth before storing the pump ready for its next use You should always perform a visual check of the pump prior to storing and re using so that any wear or
Download Pdf Manuals
Related Search