MKC-300HD
Contents
1. 14 Operation Method nist eite eet c eee pete 14 15 Mode dette e p UN RE a diste 16 PDD TSS C 17 Video Setting i set We 18 AUTO AC E e P ES E e 19 Scene i ettet ad ee e meses 20 HootsS witch Mode ee e te eret ete e e eI EO 21 ERE 22 STILE SO 22 Date Time sr 23 IRE 23 Down Converter setting esses eee nee enne nennen nennen eene e nennen 24 Miscellaneous ie tee Pea yt e edet 24 Version Into ene eo re Ee perte e edle E e eS 25 SPECICATION lade desde dS teer bia dede ee pa 25 i A ans a Ute RYE ON 25 Isa gulis RE n 26 F nctloBS eei lee 26 External Appearance exe tbs a 28 Camera Head Unit 28 nr uM PUT SILIO NR RARE 28 DN 27466 2 Name and Function of Each Parts Camera Head Side View Rear View D1 3 C mount Lens Connector MKC 300HD Camera Connector D 1 3 C mount Mount for connecting the lens and microscope adapter 2 Lens Connector Used to connect the Iris cable of the special microscope ad2. Used to select a photometric area from among SP Narrow Narrow Middle Wide and Full To choose maximum Gain among 3dB 6dB 9dB 12dB 15dB and 18dB while Automatic Gain Control is operative To select Gain level while Automatic Gain Control is not activate To fix the maximum shutter speed while Automatic Gain Control is operative Used to adjust detail enhancement QUIT DTL DTL Gain Skin DTL Gain DTL DTL Gain Skin DTL Gain DTL Set ON 10 25 Set it to ON usually Used to turn on an off whole picture detail enhancement When it is set to OFF the detail enhancement switch on the Front Panel of CCU is not operative To adjust the detail enhancement level To adjust the detail enhancement level when turning on Detail Enhancement Switch ref 5 on the Front Panel of CCU DN 27466 18 Video Setting To select display method for the still picture Video Setting QUIT Format 1080 59 94 Aspect 16 9 Analog Output YPbPr Format Select the video signal format among 1080i 59 94 1080 50 720P 59 94 720P 50 Aspect Select Picture Aspect ratio from 16 9 and 4 3 Select the picture format for analogue video output from RGB and YPbPr Analog output DN 27466 19 Auto Adjust Used for automatic black level control Auto Adjust QUIT Auto Black Balance Ready Auto White Shade Ready Auto Black Balance Used for Automatic Black Level control
3. If this adjustment is not performed with the lens are fully closed it will adversely affect the picture output of the camera No problem will occur even if itis not used during ordinary operation Auto White Shade Used for automatic white shading correction Use it when there is a large difference between brightness near the center and brightness in the neighboring part DN 27466 M Scene File 20 Used to read and write a scene file and also reset to the factory default QUIT Store Scene Store Scene Store Scene Store Scene 1 2 3 4 Scene File Ready Ready Ready Ready Load Factory Default Ready Auto Store Store Scene 1 Store Scene 2 Store Scene 3 Store Scene A Load Factory Default Auto Store ON When setting is changed the data can be saved in Scene file 1 When setting is changed the data can be saved in Scene file 2 When setting is changed the data can be saved in Scene file 3 When setting is changed the data can be saved in Scene file 4 Used to read the factory default data Used to cancel the changed setting To execute select Start and the press SET switch When setting is changed this function is used to set whether or not the data is saved at the scene file that has been automatically selected at the time In case of OFF the changed setting can be stored by Store Scene 1 Store 4 procedure above mentioned D
4. 0mm without protrusion 100g or less CCU W210xH80xD300mm without protrusion 2 5kg or less AC Power Cable 10A 125V KP320 KS31 SJT 3 10A 250V KP4819D KS31A GTCE 3 USB memory 2 Lines Horizontal 1000TV Lines 54dB y and Detail Off Encoder output Standard 2000lux F10 3200K Full Screen within 0 0596 Down Convert SDTV Output DN 27466 Auto Function Detail Enhancement Slow Shutter Paint AE Level Video Level Indicator Color Bar Photometry Area 4 3 Video Output Still Image Capture Others 27 Auto White Balance Auto Gain Control Auto Shutter Iris Auto Iris Control Auto White Shading Skin Tone Detail On Off Skin Tone Detail Enhancement Up to 1 4 seconds slow shutter speed available R chanel B chanel Level Adjustable Exposure Level Adjustable 7 steps Built in Selectable in Menu 4 3 Side Cut 1920x1080 dots still picture on a USB memory JPEG or BMP selectable Various set up from On Screen Menu DN 27466 28 6 External Appearance Camera Head Unit mm MKC 300HD in on 210 4 300 5 80 3 DN 27466 DN 27466 29 445 MKC 300HD Digital Processing Compact 3CMOS Color Camera Operation Manual First Issue March 2010 Published by Ikegami Tsushinki Co Ltd Wi It forbids to copy it without notice and to reproduce it about a part of this manual or all as for any method as well wi
5. Bitmap format JPEG Factor To determine the compression rate of JPEG format Higher number means increasing compression rate and the file size becomes smaller DN 27466 23 Date Time Adjust To set Date and Time Date Time Adjust QUIT Year 2009 Mouth 1 Day 15 Hour 13 Minute 00 Adjust Ready When Date and Time have been changed move to Adjust and select Start before quit the menu B DVI Setting To set DVI output signal format DVI Setting 1080 Format To set DVI output signal format from 1080P and 10801 DN 27466 24 Down Converter setting To set analogue video signal mode of Down Converter output Down Converter setting QUIT Format Side Cut Analog Output RGB Format To set analogue video format from among Side Cut size Letter Box size and Squeeze size Analog Output To set analogue video format from RGB format and YCbCr M Miscellaneous Used for other settings Miscellaneous QUIT Initialize ex Scene Ready Media Format Ready Cable Length 15m Bar Mode Multi Center Marker OFF Initialize ex Scene To read the factory default data expect for Scene file setting data Media Format To execute initial format USB storage device Cable Length To select the camera cable length Bar Mode To display Color Bar signal on the monitor Centre Marker To display a marker to adjust a centre point DN 27466 M Version Info 25 To display
6. Keys switches It has the same function as Blue video volume on the front panel of CCU DN 27466 B AE Mode 16 Used to adjust the electronic shutter and automatic sensitivity setting QUIT Manual Shutter AE Level Set AE Speed AE Sensitivity Peak Ratio Set Area Select AGC Max Gain Normal Gain setting Auto Shutter Limit Manual Shutter AE Level Set AE Speed AE Sensitivity Peak Ratio Set 40 0 Middle 3dB 3dB 1 10000 Usually turn it to OFF When using at a certain electronic shutter speed change it by Arrow Keys switches Used to finely control brightness when Manual Shutter is turned off and either or both of Electronic Shutter Switch ref page5 and Automatic Gain Control Switch on the Front Panel of CCU are turned on It has the same function as Brightness Control Volume on the Front Panel of CCU Used to select the response rate of the Electronic Shutter and Automatic Gain Control from among Middle Fast and Slow To adjust the tolerance level ratio to the target level according to the peak value of video signal within the photometric area and the electronic shutter To change the type of photometry while the Electronic Shutter and Automatic Gain Control are operative direction Peak value photometry direction Average value photometry DN 27466 Area Select AGC Max Gain Normal Gain setting Auto Shutter Limit B DTL Set 17
7. MKC 300HD Digital Process Compact 3CMOS Color Camera Operation Manual MKC 300HD l gi Q D MKC 300HD done 22 VIDEOLEVEL 2 ANB a on 3 B AELEVEL FUNCTION US MEMORY 422 14221422 menu ser 2 20 WP Ikegami The copyright of the software made for this product is in Ikegami Tsushinki Co Ltd It forbids to reproduction a change and so on about DN 27466 Safety Precautions For safe and correct usage Thoroughly read the Safety Precautions and the operation manual before using the unit Keep them carefully after reading and use as ready reference Pictorial Symbols The Safety Precautions and markings on the product contain various pictorial symbols to assure the safety use of the product and prevent an injury to you and other personsaswellas property damage As each symbol has the following meanings thoroughly under stand them before using the unit Please note that some precautions may not be applicable to the product that you purchased WARNING Indicates a potentially hazardous situation that may arise due to improper handling by taking no notice of this symbol and could result in a serious injury or death CAUTION Indicates a potentially hazardous situation that may arise due to improper handling by taking no notice of this symbol and could result in an injury or property dama
8. N 27466 M Foot Switch Mode 21 Used to select the operation of the foot switch to be connected QUIT Foot Switch 1 Foot Switch 2 Foot Switch 3 Foot Switch 4 Foot Switch 11 Foot Switch 2 Foot Switch 3 Foot Switch 4 Foot Switch Mode Save Scene File Freeze Freeze Select a function of the black foot switch from among Screen control Freeze Save Still picture store Scene File Fluorescein Frip Mirorr and Rotate Select a function of the green foot switch from among Screen control Freeze Save Still picture store Scene File Fluorescein Frip Mirorr and Rotate Select a function of the third foot switch from among Screen control Freeze Save Still picture store Scene File Fluorescein Frip Mirorr and Rotate Select a function of the fourth foot switch from among Screen control Freeze Save Still picture store Scene File Fluorescein Frip Mirorr and Rotate DN 27466 22 B inverse To select the video image inverse Top and Down Right and Left Inverse QUIT Horizontal OFF Vertical OFF Horizontal Select ON to inverse the video image Right to Left Vertical Select ON to inverse the video image Bottom to Top B STILL Setting Used to set the quality of a still picture to be stored in an external device USB memory STILL Setting QUIT Format JPEG JPEG Factor 4 Format To determine the format of the still picture Select JPEG format or
9. OTE Ut is the a c mains voltage prior to application of the test level DN 27466 Guidance and manufacturer s declaration electromagnetic emissions The Model MKC 300HD is intended for use in the electromagnetic environment specified below The customer or the user of the Model MKC 300HD should assure that it is used in such an environment Immunity test IEC 60601 test level compliance level Electromagnetic environment guidance Conducted RF 3 Vrms 3 Vrms Portable and mobile RF communications IEC61000 4 6 150 kHz to 80 MHz should be used no closer to any part of the MODELMKC 300HD Including Radiated RF 3 V m 3 V m cables than the recommended IEC61000 4 3 80 MHz to 2 5 GHz separation distance calculated from the equation applicable to the frequency of the transmitter Recommended separation distance d 1 2VP d 1 2VP 80 800 MHz d 1 2VP 800 MHz 2 5 GHz where P is the maximum output power rating of the transmitter Inwatts W according to the transmitter manufacturer and d is the recommended separation distance in meters m Field strengths from fixed RF transmitters as determined by an electromagnetic site survey should be less than the compliance level In each frequency range Interference may occur in the vicinity of equipment marked with the following symbol NOTE 1 At 80 MHz and 800 MHz the higher frequency range apply NOTE 2 These guidelines may not apply in all situations Elec
10. apter and 1 3 C mount lens Lens Connector Pin Assignment Connector Type HR10A 7R 4S 1 12V 2 GND 3 IRIS 4 N C 8 Camera Connector Used to connect to the Camera connector of CCU with the Camera cable DN 27466 Front Panel of Camera Control Unit CCU Power Switch 5 Automatic Gain Control Switch Auto White Balance Switch amp Iris Control Switch Color Bar Switch Detail Enhancement Switch Electronic Shutter Switch Freeze Picture Switch Picture Save Switch q3Video Level Indicator 42058 connector Brightness Control Volume Arrow Key Blue Paint Volume Q5 SET Switch qo Red Paint Volume q2Menu Switch D Power Switch To power on off MKC 300HD When this switch is turned on the logo of Ikegami lights up blue Pressing the top of the switch turns on power and pressing the bottom of the switch turns off power When this switch is turned on the picture is output in the state where power was last turned off However the state of still screen picture is not DN 27466 held 2 Auto White Balance Switch To execute Auto White Balance Use this switch when the camera is not used for a certain time color balance is not proper and the light source changes To control the white balance project a white photographic object and adjust the iris just before LEVEL INDICATOR lights up red When AWB switch is pressed Auto White Balance appears on the monitoring s
11. creen to execute auto white balance After several seconds OK appears on the screen ending auto white balance When an auto iris lens or an iris control adjustable microscope adapter is used the iris will be set to an optimum condition automatically 3 Color Bar Switch Output an internal color bar signal of the camera to a color monitor This color bar signal can be used to control the brightness contrast etc of the color monitor 0 Electronic Shutter Switch To keeps the video signal output level constant by controlling shutter speed automatically Automatic switching from 1 100 seconds to 1 10 000 seconds When this switch is used with amp Automatic Gain Control Switch an optimum picture be output regardless of the brightness of an object 6 Automatic Gain Control Switch When shooting a dark scene from a bright scene this function automatically controls sensitivity setting inside the camera thereby keeping the video signal output level constant It is possible to choose between increasing sensitivity by 6steps from up to 3dB 1 5 times and till up to 18dB 6 times on the menu When this switch is used with Electronic Shutter Switch an optimum picture can be output regardless of the brightness of a photographic object 6 Iris Control Switch To switch the iris of the microscope adapter and lens to Auto Auto iris Detail Enhancement Switch The skin tone color is mainly enhanced DN 27466 Fr
12. ctor When fixing the unit do soin accordance with the specified procedure otherwise it may drop or turn down causing a fire electric shock or injury Especially when fixing it to the wall or ceiling be sure to ask a professional contractor gt oO When an abnormal state occurs If the unit produces smoke gives out a foul smell or produces an abnormal sound turn off the power switch immediately and pull out the power plug If the unit is used as it is a fire or electric shock may be caused Check that no smoke is produced and then contact the dealer or sales representative If water or foreign matter enters the unit turn off the power switch and pull out the power plug If the unit is used as it is a fire or electric shock may be caused Check that no smoke is produced and then contact the dealer or sales representative If the unit is dropped or the case is broken turn off the power switch and pull out the power plug If the unit is used as it is a fire or electric shock may be caused Contact the dealer or sales representative If the unit fails to operate properly turn off the power switch and pull out the power plug If the unit is used as it is a fire or electric shock may be caused Contact the dealer or sales representative Do not use any damaged power cord exposed core broken wire etc If the unit is used as it is a fire or electric shock may be caused Contact the dealer o
13. deo level is low Too Dark appears If Auto White Balance is NG check the video level etc and then press the white balance switch again DN 27466 14 4 Menu Operation MKC 300HD has various useful and practical functions The user can select and set these functions on the menu The basic operation is as follows M Operation Method 1 Pressing the amp 2Menu switch ref page 5 on the front panel of CCU displays menu on the monitoring screen on which various camera functions can be set MENU Video Adjust AE Mode DTL Set Video Setting Auto Adjust Scene File Foot Switch Mode Inverse STILL Setting Date Time Adjust DVI Setting Down Converter setting Miscellaneous Version Info 2 Select an item by Arrow Keys QOO on the front panel of CCU and press SET switch to define the mode Pressing Menu switch on the front panel of CCU while the menu screen is displayed quits the menu screen DN 27466 15 Video Adjust Used to adjust the level of black red and blue of video picture Video Adjust QUIT Master Pedestal 5 Gain Offset Red 0 Blue 0 Master Pedestal Used to change the master pedestal value by Arrow KeysOO It is not used during ordinary operation Gain Offset Red Used to change the level of red by Arrow Keys switches It has the same function as Red video volume ref page5 on the front panel of CCU Blue Used to change the level of blue by Arrow
14. e but it is because of employing CMOS sensor When its sensitivity gain is going up and or when it is slow shutter mode it may appear high lighting dots In case under high temperature condition it may be remarkable It may appear horizontal stripe pattern or flicker on a video image under the fluorescent lighting In this case please use manual electrical shutter of 1 100 50 2 area or 1 120 60Hz area It will be reduce but please note that it will not disappear at all In case of fast moving object on a video image it may appear distortions Note1 When power is turned off in the state of still screen picture that state will not be held even if power is turned on again and MKC 300HD is set to the normal shooting state DN 27466 13 Setting Auto White Balance Usually MKC 300HD can be operated immediately after turning the power switch on Therefore any other operations are unnecessary However when using MKC 300HD for the first time or when the light source has been changed Auto White Balance setting is required Operation Auto White Balance Switch D Shoot a white photographic object on the screen largely Set the picture level to such a degree that the white photographic object is not excessively bright and press AWB button 2 Auto White Balance appears on the monitor screen When auto white balance is finished OK appears Auto White Balance Auto White Balance When the vi
15. eeze Picture Switch By pressing the switch the video images can be captured as a still picture 9 Picture Save Switch Press the switch to acquire the still picture from the camera into USB storage connected to 17USB connector The picture quality is 1920x1080 pixels at Bitmap format non compressed or 1920x1080 pixels at JPEG format The stored picture quality can be adjusted on the menu Red Paint Volume To finely control the red color on the video images D Blue Paint Volume To finely control the blue color on the video images 2 Brightness Control Volume To finely control the brightness of the video images It works as a control function while Electronic Shutter and Automatic Gain Control are operative When using an auto iris adjustable microscope adapter or an auto iris lens it works as a fine control function with lris Control Switch turned on It be manually controlled when this switch turned off 3 Video Level Indicator Indicate the video output level When LED of the video level indicator lights up red it means that the video output signal level has exceeded 100 Menu Switch To display the menu that the user can set as desired on the monitor Select an item you want to set with Arrow key and define it with Menu Switch for menu items you can set Refer to Menu Operation Page 15 for further detailed operations 9 SET Switch To define the item you want to set with the menu displayed pre
16. es representative As the unit has high voltage parts in it an expert who has the knowledge about the product should perform these check maintenance and repair otherwise causing an electric shock Wipe the dirt dust off the camera using a dry soft cloth If the stain is stubborn soak the cloth with water or detergent wring well and wipe If you use detergent wipe off the detergent with a cloth that was soaked in just water and wring well When wiping always turn the power off and take care not to spill water in the camera The MKC 300HD is authorized UL60601 Class NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communication Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Please classify by the material and dispose of
17. ge only Note A means a heads up Examples of symbols Symbol means a prohibited action The content of prohibited matter is mentioned near or in the figure The figure on the left side represents Caution for disassembling Symbol means a mandatory or directive content Practical precautions are shown in the figure The figure on the left side represents Pull out power plug from plug outlet QU ee The copyright of the software made for this product is in Ikegami Tsushinki Co Ltd It forbids to reproduction a change and so on about a part of this calligraphy or all without A 1 1CAUTION When using the unit Do not place a receptacle containing water or a 2 small metallic piece on the unit If water spills in the unit a fire or electric shock maybe caused Do not use other power supply voltage than specified A fire or electric shock may be caused Do not put a metal body or flammable material into the opening of the unit Do not drop in such material Afireorelectric shock may be caused Do not make alterations to the unit A fire or electric shock may be caused 9 010 When installing the unit Do not set the unit in an unstable place It may drop or turn down causing an injury Do not connect to any other equipment than specified A fire or electric shock may be caused When fixing the unit ask a professional contra
18. ic tile If floors are covered with synthetic material the relative humidity should be at least 3096 Electrical fast transient burst 2kV for power supply lines 1kV for input output 2kV for power supply lines 1kV for input output Main power quality should be that of a typical commercial or hospital environment IEC61000 4 4 lines lines Surge 1kV differential 1kV differential Main power quality should be 61000 4 5 mode mode that of a typical commercial or 2kV common mode 2kV common mode hospital environment Voltage dips short 596 Ut 596 Ut Main power quality should be interruptions and 295 dip In Ut 295 dip In Ut that of a typical commercial or voltage variations on for 0 5 cycle for 0 5 cycle hospital environment If the user power supply input 40 Ut 40 Ut of the MODEL MKC 300HD lines 6096 dip In Ut 6096 dip In Ut requires continued operation for 5 cycle for 5 cycle during power mains 7096 Ut 7096 Ut interruptions It is recommended IEC61000 4 11 3096 dip In Ut 3096 dip In Ut that the MODEL MKC 300HD be for 25 cycle for 25 cycle powered from an uninterruptible 596 Ut 596 Ut power supply or battery gt 95 dip In Ut gt 95 dip In Ut for 5 cycle for 5 cycle Power frequency 3 A m 3 A m Power frequency magnetic fields 50 60 Hz should be at characteristic of a magnetic field typical location In a typical IEC61000 4 8 commercial or hospital environment N
19. ided to record picture signals at JPEG or BMP format only into an external USB storage device and it has no function to exchange the control signal from external equipment When making USB connection between this camera and a USB storage device the USB output may not operate properly according to equipment For USB storage device of which operation has been already confirmed please contact our company DN 27466 12 Electrical Connection Turn on power supply to the monitor and other external equipment Check that CCU and the camera head are connected with a camera cable and then turn on power supply POWER switch of CCU When power to CCU is turned on MKC 300HD CAMERA HEAD CCU is initialized by the built in computer The pictures on the monitor are not stable during this period However it is not a failure When initialization is finished the video image from the camera is output under the same setting condition with the last use Note1 When moving the CCU be sure to turn off the POWER switch disconnect the power plug and remove the connecting cable between equipment beforehand CAUTION Caution for Camera cable connection and disconnection N Turn off the power of MKC 300HD when you connect or disconnect the camera cable If the CCU is turned on it may cause the fault of MKC 300HD NOTE Phenomenon on video image MKC 300HD may happen following phenomenon on its video image It is not failur
20. r further detailed operations Connect a RGB Video Cable Option to a RGB input interfaced monitor 0 VBS Output Connector SD Output SD video signal Connect a Video Cable Option to a SD Video input interfaced monitor S VIDEO Output Connector SD Output Y C video signal Connect a S VIDEO Cable Option to a S VIDEO input interfaced monitor SD RGB Output Connector Output SD RGB video signal YPbPr video signal output is also available by changing the setting on the menu Refer to Video Setting Page 19 for further detailed operations Connect a RGB Video Cable Option to a RGB input interfaced monitor USB Connector Connect USB storage device DVI D Output Connector Connect a DVI D Cable Option to a DVI D input interfaced devices such as monitor Foot Switch Connector To connect the FOOT SW cable extension from the foot switch black for a still picture capturing 1 Potential Equalization Terminal This connector uses for potential equalization grounding which have one point of protective earth DN 27466 11 3 Operation MKC 300HD Connection Camera Head DVI interfaced equipment DVD recorder DVI D cable S VIDEO cable Camera cable Coaxial cable RGB cable Foot Switch Monitor Terminate the output from RGB OUT and VIDEO OUT at 75ohms on the receiver side CAUTION for USB Connection The USB output of this camera is prov
21. r sales representative gt AP AL DN 27466 WARNING When installing the unit Do not place a heavy thing on the unit The unit may lose a balance or drop causing an injury Do not get a leg over the unit or carrying case D Do not sit down on it The unit may break down or turn down causing an injury When moving the unit be sure to turn off the power switch pull out the power plug and remove the 2 connecting cable between the unit and equipment beforehand The cord may be damaged causing a fire or electric shock When the unit 1s not used for a long period of time D be sure to pull out the power plug for safety s sake Otherwise it may cause a fire When installing the unit Do not block up the ventilating hole of the unit If the ventilating hole of the unit is blocked up heat will accumulate internally causing a fire Avoid the following usage Turning up or down the unit Turning it sideways Pushing it in ill ventilated place Placing it on a carpet etc Covering it with a table cloth etc Hints on proper usage When using the unit When using the unit in a water place such as bathroom poolside etc prevent water from flowing mm ni unit and cable otherwise causing an electric shock When using it in rainy weather during snowing on the seaside or waterside and in a cooking place use care to prevent such an accident When snow comes on check
22. ss this switch Refer to Menu Operation Page 15 for further detailed operations DN 27466 Arrow Key To select a scene file among 1 2 3 and Function The scene file setting can be fixed through the menu When selecting an item you want to set on the menu move cursor by clicking Arrow 20 and changing the contents of you want to set choose the value you have set by clicking Arrow KeysOO USB Connector Used to connect the USB storage for saving a still picture DN 27466 Rear Panel of Camera Control Unit CCU amp VBS Output Connector 9S VIDEO Output Connector 9058 Connector SD RGB Output Connector DVI D Output Connector ER Genlock Input Connecto Foot Switch Connector HD RGB Output Connector HD SDI Output Connector Potential Equalization Terminal Camera Connector D Camera Connector Connect the camera cable from the camera head 2 HD SDI Output Connector Output 2ch of HD SDI signal Connect a Video Cable Option to a HD SDI input interfaced monitor 9 Genlock Input Connector To use in phase synchronization with other systems Connect a synchronized signal from another system Equivalent to Three Phase Synchronization HD and Two Phase Synchronization SD DN 27466 10 HD RGB Output Connector Output HD RGB video signal YPbPr video signal output is also available by changing the setting on the menu Refer to Video Setting Page 19 fo
23. the software version of this camera 5 Specification B Ratings Optics Sensor Scanning System Image Pickup Device Effective Pixels Lens Mount Video Output Aspect Ratio Output Video Signal Input Video Signal Version Info RGB Prism method 1125 59 94Hz Progressive Scan 1 3 inch 2 07M pixels CMOS x 3 1920 1080 V C Mount 2 1 Interlace 1125 Line 59 94 Field 30 Frame H16 V9 HDTV Output Analog Y Pb Pr D sub 1 Line HD SDI BNC 2 Lines DVI 1920x1080i p 1 Line SDTV Output Down Convert Composite VBS BNC 1 Line D sub 1 Line S VIDEO S Terminal 1 Line D Sub 1 Line RGB D sub 1 Line External Sync Tri Sync 0 6Vp p 75 ohms or BBS 0 3Vp p 75 ohms DN 27466 Input Video Signal Interface Electrical Shutter Speed Camera Cable Length Power Requirement Power Consumption Operating Temperature Storage Temperature Dimensions Weight Accessories Performance Resolutions S N Ratio Sensitivity Registration Error Functions Image Flip and Turn Still Image Capture Scene File 26 4contact D Sub 9 pin Female 1 Line Select from Still Image Capture Scene File and Image Flip amp Remote Input Turn USB2 0 Still Image Capture 1 60 to 1 10000 Rolling Shutter 5m 10m Basic Cable Length Option Max 20m Using Standard Cable Extension Option Max 30m Using Custom Cables and others Option AC100V to 240V 10 100VA 0 C to 40 C 10 to 60 Camera Head W34xH40xD4
24. the surrounding conditions before use Stop using the unit temporarily as necessary and do not touch 16 otherwise causing an electric shock Do not connect any equipment whose required electric power exceeds the wattage W that can be supplied from the AC outlet Refer to wattage shown near the AC outlet or in the operation manual Do not bend or twist or pull the power cord and connect ing cable excessively The covering material of the cord and cable may break causing an electric shock When installing the unit Avoid installing the unit in a moist place dusty place or any other place exposed to oily smoke and vapor otherwise causing an electric shock Do not place the unit near a cooking table or humidifier As this unit is heavy over 10Kg carry it by 2 more persons If it is carried by one person it may turn down or drop some times causing an physical damage to the waist or hand or a physical injury Take preventive measures against the overturn of the unit due to an earthquake or sudden shock As the unit may overturn and cause a physical injury take preventive measures against the overturn Maintenance Turn off the power switch and pull out the power plug before maintenance otherwise causing an electric shock In order to keep a long and stable performance Periodical check is recommended For details of the periodical check consult with the sal
25. them according to the law and the ordinance etc of the country and the local government when you dispose of the main body and materials for packing The MKC 300HD is not AP APG equipment The BATTERY for BT1 in MKC 300HD that should be used same model as below when you need to exchange it MODEL CR2032 DN 27466 Guidance and manufacturer s declaration electromagnetic emissions The Model MKC 300HD is intended for use in the electromagnetic environment specified below The customer or the user of the Model MKC 300HD should assure that it is used in such an environment Emissions test Compliance Electromagnetic The Model MKC 300HD uses RF energy only for its internal function Therefore its RF emissions are very low l are not likely to cause interference in nearby electronic equipment RF emissions CISPR 11 Class A Harmonic emissions The Model MKC 300HD is suitable for use in all IEC61000 3 2 Class A establishments other than domestic and those directly Voltage connected to the public low voltage power supply network fluctuations flicker Complies that supplies buildings used for domestic purposes emissions IEC61000 3 3 Immunity test IEC 60601 test level compliance level Electromagnetic environment guidance Electrostatic discharge ESD IEC61000 4 2 6 contact 8kV air 6 contact 8kV air Floors should be wood concrete or ceram
26. thout taking the assent of Ikegami Tsushinki Co Ltd A specification and an appearance are sometimes changed without notice Sc Editied Chuo seizu Co Ltd Ikegami Ikegami Tsushinki Co Ltd 5 6 16 Ikegami Ohta ku Tokyo 146 Japan Phone 03 5700 1111 Fax 03 5700 1137 Ikegami Electronics U S A Inc 37 Brook Avenue Maywood New Jersey 07607 U S A Phone 201 368 9171 Fax 201 569 1626 Ikegami Electronics Europe GmbH Ikegami strasse 1 41460 Neuss 1 Germany Phone 02131 123 0 Fax 02131 102820
27. tromagnetic propagation Is affected by absorption and reflection from structures objects and people Field strengths from fixed transmitters such as base stations for radio cellular cordless telephones and land mobile radios amateur radio AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy To assess the electromagnetic environment due to fixed RF transmitters an electromagnetic site survey should be considered If the measured field strength In the location in which the MODEL MKC 300HD Is used exceeds the applicable RF compliance level above the MODEL MKC 300HD should be observed to verify normal operation If abnormal performance is observed additional measures may be necessary such as reorienting or relocating the MODEL MKC 300HD Over the frequency range 150 kHz to 80 MHz field strengths should be less than 3 V m DN 27466 CONTENTS Name and Function of Each Parts eene enne 6 Camera Head sese eere tete ee eei ch teure Uds tenere 6 Front Panel of Camera Control Unit CCU eese 5 Rear Panel of Camera Control Unit CCU csccecsssscseescsseceesanscseessnseseesanscsorenss 9 iie 11 11 Electrical Connectlon Oeo HEAT IRI dettes 12 Setting Auto White 13 Men Operation cn
Download Pdf Manuals
Related Search
MKC 300HD mkc-300hd mkc200hd mkc200hdm mkc3002250 mkc300-b-4t-45kw mk300d mc 300 days mc300dz mck 300 mashin