Chapter 13 Packaging for Storage or Shipment
Contents
1. 13 Packaging for Storage or Shipment Chapter 13 Packaging for Storage or Shipment Laser Tube Laser Tube The laser tube assembly should be shipped in an Agilent container designed for that purpose In addition the container must indicate that the laser tube contains magnetic material To exchange the laser tube assembly first order the replacement assembly and then upon receipt return the old assembly in the same container If it is necessary to ship a laser assembly contact your nearest Agilent Sales and Service Office for an approved container Tagging for Service If a product is being returned to Agilent Technologies for service please provide enough information to help us do what is needed and return the product to you For best service results be as explicit as possible when describing the assembly failure symptoms Original Packaging Containers and materials identical to those used in factory packaging are available through any Agilent Technologies office If the instrument is being returned to Agilent for servicing attach a blue tag indicating the type of service required return address model number and full serial number Also mark the container FRAGILE to ensure careful handling The laser head container should indicate the instrument contains magnetic material In any correspondence refer to the instrument by model number and full serial number Other Packaging The following general instructions should b2. ackaging 13 4 Product specifications and descriptions in this document subject to change without notice Copyright C 2002 Agilent Technologies Printed in U S A 07 02 This is a chapter from the manual titled Laser and Optics User s Manual For complete manual order Paper version p n 05517 90045 CD version p n 05517 90063 This chapter is p n 05517 90139 User s Manual
3. e used for repacking system components with commercially available materials These methods DO NOT apply to the laser tube assembly or the Agilent 10735A or Agilent 10736A interferometers which MUST be shipped in an Agilent approved container If the laser assembly has not been removed from the laser head itself the laser head may be packaged and shipped with the methods below 1 Wrap the instrument in heavy paper or plastic If the instrument is a circuit board wrap it in anti static material first then add additional wrapping material If shipping to Agilent Technologies 13 2 User s Manual Chapter 13 Packaging for Storage or Shipment Other Packaging office or service center attach a tag indicating the service required return address model number and full serial number 2 Usea strong shipping container A double wall carton made of 350 pound test material is adequate 3 Usea layer of shock absorbing material 70 to 100 mm 3 to 4 inches thick around all sides of the instrument to provide firm cushioning and prevent movement inside the container Protect the front panel with cardboard 4 Seal shipping container securely Mark shipping container FRAGILE to ensure careful handling Indicate if magnetic material such as a laser head is enclosed 6 In any correspondence refer to instrument by model number and full serial number User s Manual 13 3 Chapter 13 Packaging for Storage or Shipment Other P
Download Pdf Manuals
Related Search