USER MANUAL
Contents
1. to 40 C 32 to 104 F TEMPERATURE STORAGE 40 to 70 C 40 to 158 F TEMPERATURE HUMIDITY 10 to 90 RHL non condensing POWER SOURCE 12V DC 275mA 12V DC 430mA DIMENSIONS 18 8cm x 11 4cm x 2 4cm 7 4 x 4 5 x 1 0 W D H WEIGHT 0 6kg 1 4lbs ACCESSORIES 2 Power supply units 12V 1 25A OPTIONS RK T2B 19 rack mount Kramer external IR sensor P N 95 0104050 Kramer IR emitter cable P N C A35 IRE 10 Specifications are subject to change without notice Go to our Web site at http Awww kramerelectronics com to access the list of resolutions TP 580T TP 580R Technical Specifications LIMITED WARRANTY The warranty obligations of Kramer Electronics for this product are limited to the terms set forth below Whatis Covered This limited warranty covers defects in materials and workmanship in this product What is Not Covered This limited warranty does not cover any damage deterioration or malfunction resulting from any alteration modification improper or unreasonable use or maintenance misuse abuse accident neglect exposure to excess moisture fire improper packing and shipping such claims must be presented to the carrier lightning power surges or other acts of nature This limited warranty does not cover any damage deterioration or malfunction resulting from the installation or removal of this product from any installation any unauthorized tampering with this product any repairs2. office nearest you For a list of authorized Kramer Electronics resellers and or Kramer Electronics authorized service providers please visit our web site at www kramerelectronics com or contact the Kramer Electronics office nearest you In order to pursue any remedy under this limited warranty you must possess an original dated receipt as proof of purchase from an authorized Kramer Electronics reseller If this product is returned under this limited warranty a return authorization number obtained from Kramer Electronics will be required You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product If itis decided that this product should be returned directly to Kramer Electronics this product should be properly packed preferably in the original carton for shipping Cartons not bearing a return authorization number will be refused Limitation on Liability THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY Some countries districts or states do not allow the exclusion or limitation of relief special incidental consequential or indirect damages or the limitation of liability to specif
3. removed or defaced ii the product is not distributed by Kramer Electronics or iii this product is not purchased from an authorized Kramer Electronics reseller If you are unsure whether a reseller is an authorized Kramer Electronics reseller please visit our Web site at www kramerelectronics com or contact a Kramer Electronics office from the list at the end of this document Your rights under this limited warranty are not diminished if you do not complete and return the product registration form or complete and submit the online product registration form Kramer Electronics thanks you for purchasing a Kramer Electronics product We hope it will give you years of satisfaction For the latest information on our products and a list of Kramer distributors visit our Web site where updates to this user manual may be found We welcome your questions comments and feedback Web site www kramerelectronics com KRAMER E mail info kramerel com SAFETY WARNING Disconnect the unit from the power supply before opening and servicing P N 2900 300034 Rev 2
4. signals to a twisted pair signal The TP 580R converts the twisted pair signal back into HDMI RS 232 and IR signals The TP 580T and the TP 580R can form a transmission and reception system either together or each device separately with another certified HDBaseT device For example the transmitter and receiver system can be composed of the TP 580T that connects to the Kramer TP 580R to form a transmitter receiver pair The TP 580T transmitter and TP 580R receiver feature e A bandwidth of up to 3 4Gbps e Arrange of up to 70 meters 230 feet at 10800 60HzZ 36bpp using Kramer BC DGKat623 cables For optimum range and performance use Kramer s BC DGKat524 BC DGKat623 and BC DGKat7a23 shielded twisted pair STP cables Note that the transmission range depends on the signal resolution graphics card and display used The distance using non Kramer CAT 5 CAT 6 and CAT 7 cables may not reach these ranges e HDBaseT technology e HDTV compatibility and HDCP compliance e HDMI support HDMI deep color x v Color lip sync HDMI uncompressed audio channels Dolby TrueHD DTS HD CEC 2k 4k 3D e EDID pass through passes EDID HDCP signals from the source to the display e Bidirectional RS 232 interface commands and data can flow in both directions via the RS 232 interface allowing status requests and control of the destination unit e Bidirectional infrared interface for remote control of peripheral devices see Sectio
5. KRAMER ELECTRONICS LTD USER MANUAL MODELS TP 580T HDMI Line Transmitter TP 580R HDMI Line Receiver P N 2900 300034 Rev 2 TP 580T and TP 580R Quick Start Guide h This guide helps you install and use your product for the first time For more detailed information go a 5 to http www kramerelectronics com support product_downloads asp to download the latest manual if Et or scan the QR code on the left Step 1 Check what s in the box E The TP 580T HDMI Line Transmitter and or Mounting Brackets the TP 580R HDMI Line Receiver wi 8 Rubber feet 2 Power adapters 12V DC input 1 Quick start guide Save the original box and packaging materials in case you need to return your product for service Step 2 Install the TP 580T TP 580R Mount the devices in racks using the optional RK T2B rack adapter available for purchase or place them on shelves Step 3 Connect the inputs and outputs After mounting the units connect the inputs and outputs Always switch OFF the power on each device before External IR connecting it to your TP 580T TP 580R Emitter TP S80R HOBT IN HDM OuT External IR Sensor Projector 8 DVD Player IR Transmitter Twisted Pair Pinout 12457836 Green White Brown White Brown Step 4 Connect the power Connect the power adapters to the TP 580T and TP 580R and plug the adapter s into the mains electricity Contents Introduction 2 Getting
6. Started 2 1 Achieving the Best Performance 2 2 Safety Instructions 2 3 Recycling Kramer Products 3 Overview 3 1 About HDBaseT Technology 3 2 Using Twisted Pair Cable 4 Defining the TP 580T HDMI Line Transmitter 5 Defining the TP 580R HDMI Line Receiver 6 Connecting the TP 580T and TP 580R Transmitter Receiver Pair 6 1 Controlling the A V Equipment via an IR Transmitter 6 2 Connecting to a PC 6 3 Wiring the RJ 45 Connectors 7 Technical Specifications Figures Figure 1 TP 580T HDMI Line Transmitter Figure 2 TP 580R HDMI Line Receiver Figure 3 Connecting the TP 580T TP 580R Transmitter Receiver Pair Figure 4 Controlling a DVD Player via the TP 580R Figure 5 Controlling an LCD Display via the TP 580T Figure 6 RS 232 Control Figure 7 TP PINOUT NO unk WNHNDND Introduction Welcome to Kramer Electronics Since 1981 Kramer Electronics has been providing a world of unique creative and affordable solutions to the vast range of problems that confront video audio presentation and broadcasting professionals on a daily basis In recent years we have redesigned and upgraded most of our line making the best even better Our 1 000 plus different models now appear in 11 groups that are clearly defined by function GROUP 1 Distribution Amplifiers GROUP 2 Switchers and Routers GROUP 3 Control Systems GROUP 4 Format Standards Converters GROUP 5 Range Extenders and Repeaters GROUP 6 Specialty AV Product
7. al appliances that may adversely influence signal quality e Position your Kramer TP 580T and TP 580R transmitter receiver pair away from moisture excessive sunlight and dust This equipment is to be used only inside a building It may only be connected to other equipment that is installed inside a building Safety Instructions Caution There are no operator serviceable parts inside the unit Warning Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning Disconnect the power and unplug the unit from the wall before installing 2 3 Recycling Kramer Products The Waste Electrical and Electronic Equipment WEEE Directive 2002 96 EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled To comply with the WEEE Directive Kramer Electronics has made arrangements with the European Advanced Recycling Network EARN and will cover any costs of treatment recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility For details of Kramer s recycling arrangements in your particular country go to our recycling pages at http Avww kramerelectronics com support recycling Overview The TP 580T and TP 580R are a high performance HDBaseT technology twisted pair transmitter and receiver for HDMI bidirectional RS 232 and IR signals The TP 580T converts the HDMI signal RS 232 and IR input
8. attempted by anyone unauthorized by Kramer Electronics to make such repairs or any other cause which does not relate directly to a defect in materials and or workmanship of this product This limited warranty does not cover cartons equipment enclosures cables or accessories used in conjunction with this product Without limiting any other exclusion herein Kramer Electronics does not warrant that the product covered hereby including without limitation the technology and or integrated circuit s included in the product will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used How Long Does this Coverage Last Seven years as of this printing please check our Web site for the most current and accurate warranty information Who is Covered Only the original purchaser of this product is covered under this limited warranty This limited warranty is not transferable to subsequent purchasers or owners of this product What Kramer Electronics will do Kramer Electronics will at its sole option provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty 1 Elect to repair or facilitate the repair of any defective parts within a reasonable period of time free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condi
9. ied amounts so the above limitations or exclusions may not apply to you Exclusive Remedy TO THE MAXIMUM EXTENT PERMITTED BY LAW THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL OR WRITTEN EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A CONSUMER PRODUCT UNDER THE MAGNUSON MOSS WARRANTY ACT 15 U S C A 2301 ET SEQ OR OTHER APPICABLE LAW THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU AND ALL IMPLIED WARRANTIES ON THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE SHALL APPLY AS PROVIDED UNDER APPLICABLE LAW Other Conditions This limited warranty gives you specific legal rights and you may have other rights which vary from country to country or state to state This limited warranty is void if i the label bearing the serial number of this product has been
10. n 6 1 e LED status indicators for input selection output link and power 3 1 3 2 TP 580T TP 580R Overview e Compact DigiTOOLS enclosures and these can be rack mounted side by side in a 1U rack space with the optional RK 3T RK 6T or RK 9T universal rack adapters About HDBaseT Technology HDBaseT is an advanced all in one connectivity technology supported by the HDBaseT Alliance It is particularly suitable in the consumer home environment as a digital home networking alternative where it enables you to replace numerous cables and connectors by a single LAN cable used to transmit for example uncompressed full high definition video audio IR as well as various control signals The products described in this user manual are HDBaseT certified Using Twisted Pair Cable Kramer engineers have developed special twisted pair cables to best match our digital twisted pair products the Kramer BC DGKat524 CAT 5 24 AWG the Kramer BC DGKat623 CAT 6 23 AWG cable and the Kramer BC DGKat7a23 CAT 7a 23 AWG cable These specially built cables significantly outperform regular CAT 5 CAT 6 CAT 7a cables We strongly recommend that you use shielded twisted pair cable 4 Defining the TP 580T HDMI Line Transmitter HDBT Out HDMI IN DMI Line Transmitter Figure 1 TP 580T HDMI Line Transmitter Feature Function 1 HDBT OUT RJ 45 Connects to the HDBT IN RJ 45 connector on the TP 580R Con
11. n HDMI input device is connected 8 OUTLED Lights green when an HDMI output device is detected 9 LINK LED Lights green when the TP connection is active ON LED Lights green when receiving power TP 580T TP 580R Defining the TP 580R HDMI Line Receiver 6 Connecting the TP 580T and TP 580R Transmitter Receiver Pair Always switch off the power to each device before connecting it to your Transmitter and Receiver After connecting your Transmitter and Receiver connect their power and then switch on the power to each device You can use the TP 580T HDMI Line Transmitter and the TP 580R HDMI Line Receiver to configure an HDMI transmitter receiver system as shown in the example in Figure 3 To connect the TP 580T connect the 1 2 HDMI source for example a DVD player to the HDMI IN connector RS 232 9 pin D sub connector to a computer for example a laptop to control the projector IR 3 5mm mini jack to an IR emitter HDBT OUT RJ 45 connector over twisted pair to the TP 580R HDBT IN connector Alternatively you can use any other certified HDBaseT receiver device for example the Kramer WP 580R 12V DC power adapter to the power socket and connect the adapter to the mains electricity not shown in Figure 3 To connect the TP 580R connect the 6 7 10 HDMI OUT connector to the HDMI acceptor for example a projector RS 232 9 pin D sub connector to an RS 232 port for example a p
12. nector HDMI IN Connector Connects to the HDMI source 3 PROG NORMAL Switch Slide to PROG to upgrade to the latest Kramer firmware via RS 232 or slide to NORMAL for normal operation 4 RS 232 9 pin D sub Connects to an RS 232 port for firmware upgrade and Connector control of the destination unit 5 R 3 5mm Mini Jack Connects to an external infrared transmitter sensor Connector receiver 6 12V DC 12V DC connector for powering the unit IN LED Lights green when an HDMI input device is connected 8 OUT LED Lights green when an HDMI output device is detected 9 LINKLED Lights green when the TP connection is active ON LED Lights when receiving power TP 580T TP 580R Defining the TP 580T HDMI Line ansmitter 5 Defining the TP 580R HDMI Line Receiver HDBT IN HDMI Out IN OuT LINK ON Figure 2 TP 580R HDMI Line Receiver Feature Function 1 HDBT IN RJ 45 Connects to the HDBT OUT RJ 45 connector on the TP Connector 580T HDMI OUT Connector Connects to the HDMI acceptor 3 PROG NORMAL Button Slide to PROG to upgrade to the latest Kramer firmware via RS 232 or slide to NORMAL for normal operation 4 RS 232 9 pin D sub Connects to an RS 232 port for firmware upgrade and Connector control of the destination unit 5 R3 5mm Mini Jack Connects to an external infrared transmitter sensor Connector receiver 6 12V DC 12V DC connector for powering the unit IN LED Lights green when a
13. ot required To connect a PC via RS 232 connect the RS 232 9 pin D sub rear panel port on the transmitter receiver system unit via a 9 wire straight cable only pin 2 to pin 2 pin 3 to pin 3 and pin 5 to pin 5 need to be connected to the RS 232 9 pin D sub port on your PC Figure 6 shows RS 232 bidirectional control of the projector that is connected to TP 580R via a PC connected to the TP 580T TP 580T Projector Figure 6 RS 232 Control Ea TP 580T TP 580R Connecting the TP 580T and TP 580R Transmitter Receiver Pair 6 3 Wiring the RJ 45 Connectors This section defines the TP pinout using a straight pin to pin cable with RJ 45 connectors Note that the cable Ground shielding must be connected soldered to the connector shield EAMA568B Figure 7 TP PINOUT PIN Wire Color a fewe e oren e eom TP 580T TP 580R Connecting the TP 580T and TP 580R Transmitter Receiver Pair za 7 Technical Specifications TP 580T TP 580R INPUTS 1 HDMI connector 1 RJ 45 connector OUTPUTS 1 RJ 45 connector 1 HDMI connector PORTS 1 IR on a 3 5mm mini jack for 1 IR on a 3 5mm mini jack for emitter or sensor emitter or sensor 1 RS 232 on a 9 pin D sub 1 RS 232 on a 9 pin D sub connector connector BANDWIDTH Supports up to 3 4Gbps bandwidth per graphic channel RS 232 BAUD RATE 115200 COMPLIANCE WITH Supports HDMI and HDCP HDMI STANDARD OPERATING 0
14. rojector that is controlled by the laptop connected to TP 580T IR 3 5mm mini jack to an IR sensor HDBT IN RJ 45 connector over twisted pair to the TP 580T HDBT OUT connector Alternatively you can use any other certified HDBaseT transmitter device for example the Kramer WP 580T 12V DC power adapter to the power socket and connect the adapter to the mains electricity not shown in Figure 3 TP 580T TP 580R Connecting the TP 580T and TP 580R Transmitter Receiver Pai Emitter External IR Projector Sensor Figure 3 Connecting the TP 580T TP 580R Transmitter Receiver Pair TP 580T TP 580R Connecting the TP 580T and TP 580R Transmitter Receiver Pair 6 1 Controlling the A V Equipment via an IR Transmitter Since the IR signal on the TP 580T TP 580R transmitter receiver pair is bidirectional you can use a remote control transmitter that is used for controlling a peripheral device for example a DVD player to send commands to the A V equipment from either end of the transmitter receiver system To do so you have to use the Kramer external IR sensor on one end P N 95 0104050 and the Kramer IR emitter cable on the other end P N C A35 IRE 10 Two IR Emitter Extension Cables are also available a 15 meter cable and a 20 meter cable The example in Figure 4 illustrates how to control the DVD player that is connected to TP 580T using a remote control via the TP 580R In this example the External IR Sensor i
15. s GROUP 7 Scan Converters and Scalers GROUP 8 Cables and Connectors GROUP 9 Room Connectivity GROUP 10 Accessories and Rack Adapters and GROUP 11 Sierra Video Products Congratulations on purchasing your Kramer TP 580T and TP 580R transmitter receiver pair which is ideal for the following typical applications e Projection systems in conference rooms boardrooms auditoriums hotels and churches production studios e Rental and staging Note that TP 580T and TP 580R are purchased separately and can be connected to other HDBaseT certified transmitters and receivers respectively 2 580R Introduction 2 2 1 2 2 Getting Started We recommend that you e Unpack the equipment carefully and save the original box and packaging materials for possible future shipment e Review the contents of this user manual e Use Kramer high performance high resolution cables Go to http Awww kramerelectronics com to check for up to date user manuals application programs and to check if firmware upgrades are available where appropriate Achieving the Best Performance To achieve the best performance e Use only good quality connection cables to avoid interference deterioration in signal quality due to poor matching and elevated noise levels often associated with low quality cables e Do not secure the cables in tight bundles or roll the slack into tight coils e Avoid interference from neighboring electric
16. s connected to the IR connector of the TP 580R and an IR Emitter is connected between the TP 580T and the DVD player The DVD remote control sends a command while pointing towards the External IR Sensor The IR signal passes through the TP cable and the IR Emitter to the DVD player which responds to the command sent TP 580T DVD Player TP DVD Player l External R P IR Transmitter O Sensor Figure 4 Controlling a DVD Player via the TP 580R LCD Display TP 580T TP 580R Connecting the TP 580T and TP 580R Transmitter Receiver Pair The example in Figure 5 illustrates how to control the LCD display that is connected to TP 580R using a remote control via the TP 580T In this example the External IR Sensor is connected to the IR connector of the TP 580T and an IR Emitter is connected between the TP 580R and the LCD display The LCD display remote control sends a command while pointing towards the External IR Sensor The IR signal passes through the TP cable and the IR Emitter to the LCD display which responds to the command sent TP 580T Player External IR s LCD Display IR Transmitter Figure 5 Controlling an LCD Display via the TP 580T TP 580T TP 580R Connecting the TP 580T and TP 580R Transmitter Receiver Pair on 6 2 Connecting to a PC You can connect to the transmitter receiver system via an RS 232 connection using for example a PC Note that a null modem adapter connection is n
17. tion Kramer Electronics will also pay the shipping costs necessary to return this product once the repair is complete 2 Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially the same function as the original product 3 Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty What Kramer Electronics will not do Under This Limited Warranty If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party authorized to repair Kramer Electronics products this product must be insured during shipment with the insurance and shipping charges prepaid by you If this product is returned uninsured you assume all risks of loss or damage during shipment Kramer Electronics will not be responsible for any costs related to the removal or re installation of this product from or into any installation Kramer Electronics will not be responsible for any costs related to any setting up this product any adjustment of user controls or any programming required for a specific installation of this product How to Obtain a Remedy under this Limited Warranty To obtain a remedy under this limited warranty you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics
Download Pdf Manuals
Related Search