USER MANUAL - Cellular Materials International
Contents
1. See pictures of brake lever below Brake lever should be in the center position for smooth terrain Brake lever should be in the left position for rough terrain Place your foot on the front wheel caster tire while repositioning the brake lever Smooth Terrain Position Smooth Terrain Brake Lever Position Rough Terrain Position Rough Terrain Brake Lever Position V 07242015B Deployed Position Lateral Movement To move the Mobile Shield through narrow doorways remove the front locking pin and push the unit sideways lateral movement Otherwise locking pin should remain in place at all times Deployed Position Brake Park Brake Park Position Front of shield is on the ground Brake Park Lever Position V 07242015B Folded Position WARNING The rear caster alignment pins must be engaged prior to rotating the Mobile Shield from the deployed position to the folded storage and towing positions Upon redeployment remove rear caster pins for proper mobility and steering WARNING Remove the threaded locking pins to rotate the upper shield and then reinstall locking pines Locking pins must be tight at all times when moving or towing the Mobile Shield Storage Position The storage position was designed to keep the Mobile Shield s weight on the frame instead of the casters which will prolong caster life The threaded locking pins must be engaged prior to rotating the unit into or from the storage or towing po2. NOT SCRUB Rinse and dry with a soft cloth 3 To remove labels stickers or grease rub gently with a cloth wet thoroughly in VM amp P naphtha kerosene or isopropyl alcohol Wash and rinse Do NOT allow interior surface to come in contact with other solvents razor blades scrapers or squeegees 4 For repair or replacement contact Hawkins Glass Email angele hawkinsglass com Phone 703 339 2194 Product Warranty CMI will guarantee all workmanship to be free of defects for one year from date of shipment This warranty covers welding assemblies and moving parts such as wheels and castors from manufacturing defects This does not cover damage from normal wear and tear or misuse abuse or damage caused by a hostile battle environment 11 V 07242015B Any unauthorized changes made to the MST2 will void this warranty Paint is not covered by this warranty Items such as the glass will not be covered by CMI but may be covered by the glass manufacturer s own warranty DISCLAIMER AND PRODUCT USE AGREEMENT THE PURPOSE OF MOBILE SHIELDS IS TO PROVIDE PROTECTION FROM SPECIFIC THREATS AND IT IS IMPOSSIBLE FOR CELLULAR MATERIALS INTERNATIONAL INC CMI TO PROVIDE PROTECTION AGAINST ALL SUCH THREATS OR UNKNOWN CONTINGENCIES THESE SHIELDS ARE BUILT USING MATERIALS DESIGNED MANUFACTURED AND TESTED BY SUPPLIERS TO MEET A SPECIFIC THREAT BASED UPON DATA THAT IS PROVIDED BY THE NATIONAL INSTITUTE OF JUSTICE NIJ PERFORMANCE STANDARDS THE PU
3. F BREACH OF CONTRACT TORT OR OTHERWISE REGARDLESS OF WHETHER SUCH DAMAGES WERE FORESEEABLE AND WHETHER OR NOT ANY PURCHASER OR USER OF MOBILE SHIELDS WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES IN NO EVENT SHALL CMI S AGGREGATE LIABILITY ARISING OUT OF OR RELATED TO PURCHASE AND USE OF ANY PARTICULAR MOBILE SHIELD WHETHER ARISING OUT OF OR RELATED TO BREACH OF CONTRACT TORT OR OTHERWISE EXCEED THE TOTAL AMOUNT PAID TO CMI AS PAYMENT FOR THAT PARTICULAR MOBILE SHIELD THE FOREGOING LIMITATIONS SHALL APPLY EVEN IF THE REMEDIES UNDER THIS DISCLAIMER AND PRODUCT USE AGREEMENT FAIL OF THEIR ESSENTIAL PURPOSE 12
4. RCHASER AND THOSE USING MOBILE SHIELDS AGREE TO ASSUME ALL RISKS AND LIABILITIES WHEN USING MOBILE SHIELD SYSTEMS INCLUDING WITHOUT LIMITATION RISKS AND LIABILITIES ARISING FROM INJURY OR DEATH OF ANY PERSON AND RISKS AND LIABILITIES ARISING FROM DAMAGE TO OR DESTRUCTION OF ANY PROPERTY PURCHASERS AND USERS AGREE BY USE OF MOBILE SHIELDS TO INDEMNIFY AND HOLD HARMLESS CMI FROM CLAIMS DEMANDS CAUSES OF ACTION LOSSES DAMAGES PENALTIES LIABILITIES AND EXPENSES ARISING FROM OR RELATING IN ANY WAY TO THE USE TRANSPORTING AND HANDLING OF MOBILE SHIELDS CMI MAKES NO CLAIM OF A LEVEL OF PROTECTION OUTSIDE NIJ STANDARDS AND ONLY WHEN SUBJECTED TO NIJ TESTING METHODS CMI NEITHER ASSUMES NOR AUTHORIZES ANYONE TO ACCEPT ANY TYPE OF LIABILITY ON BEHALF OF CMI MOBILE SHIELDS ARE DESIGNED TO PROVIDE A LIMITED LEVEL OF PROTECTION IN VERY DANGEROUS SITUATIONS PURCHASERS AND USERS AGREE BY THEIR USE OF MOBILE SHIELDS TO BEAR ALL RESPONSIBILITY FOR THEIR OWN SAFETY CMI MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO MOBILE SHIELDS INCLUDING ANY A WARRANTY OF MERCHANTABILITY OR B WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE WHETHER EXPRESS OR IMPLIED BY LAW COURSE OF DEALING COURSE OF PERFORMANCE USAGE OF TRADE OR OTHERWISE IN NO EVENT SHALL CMI BE LIABLE TO ANY PARTY FOR ANY CONSEQUENTIAL INCIDENTAL INDIRECT EXEMPLARY SPECIAL OR PUNITIVE DAMAGES INCLUDING ANY DAMAGES FOR BUSINESS INTERRUPTION LOSS OF USE REVENUE OR PROFIT WHETHER ARISING OUT O
5. USER MANUAL MST2 Mobile Shield Patent Pending Manufactured by Cellular Materials International Inc 1201 Five Springs Rd Charlottesville VA 22902 info cellularmaterials com Distributor Nationwide Structures Inc P O Box 55461 Virginia Beach VA 23471 Ph 888 430 0301 Fax 757 464 2787 gail nationwidestructures com Capability Chart V 07242015B National Institute of Justice NIJ Standard 0101 04 Ballistic Test Chart NI Certified US ND Standard 0101 04 is a standard for Ballistic Resistance of Police Body rmor developed by the law enforcement standards laboratory of the National Institute of Justice ND US Department of Justice Washington DC E FE ia 7 62 mm NATO 9 6 9 148 gr 2780230 ft s 1 73 in 44 mm het 1080 30 ft s Fed 22 Caliber LR LRN 2 6 g 40 gr 329410 m s 1 73 in 44 mm I 2 1055 30 ft s sol ACP FMJ RN 6 2 9 95 gr 1 73 dq g 95 ar 322410 m s IA 1120 30 ft s E 9 FMI RN 8 0 g 124 gr 1 73 n 44 Hi auge 341210 m s ba Sg ed 1055430 ft s 40 SAW FMI 11 7 g 180 gr 1 73 di a 180 gr 322410 m s Gre 12052430 ft s gr FMJ RN 3 0 g 124 gr 1 73 di f iiij g 124 gr 367210 m
6. s vii a II A SS 1430230 ft s Se 357 Mag JSP 10 2 9 158 gr 436 10 m s 1 73 in 44 mm 1430450 ft s er 4g FMI RN 3 2 g 124 gr 1 73 di mm gf gr 436210 m s in 44 mm IIIA J 1430 30 ft s 44 Mag SJHP 15 6 g 240 gr 1 73 dai hoes 9 240 gr 436410 m s Be BLA FM Product Specifications Model Protection level NIJ II Steel Astralloy V2 armor plate 0 25 thick Glass Hawkins Glass Laminated ballistic NIJ 3 Window area 2 at 2 sq ft each Caster wheels 10 semi pneumatic 847410 m s Max depth 56 5 Max width inboard wheels 46 Max width outboard wheels 59 Weight all attachments plus hitch bar 765 Ibs Ball hitch size 2 Hitch pin 5 8 Transport wheels size 8 with 4 1 2 lugs Wheel lug nut torque 60 ft Ibs Total transport wheel size 18 Transport tire max pressure 50 psi Transport tires size 5 70 8 load range B Cap 715 Ibs ea Max height 75 Recommended vehicle hitch height 18 Maximum safe transport speed 35 mph Transport wheels location inboard or outboard as per customer request Window bolts and transport wheel flange plate Grade 8 bolts Standard Color Powder Coat Black V 07242015B Deployed Position Rolling There are two positions for rolling gt Smooth Terrain gt Rough Terrain Modes are changed by repositioning the brake lever
7. sitions to enable safe control of the unit If pins are not reinstalled the shield may unfold resulting in abrupt change in center of gravity that may cause serious bodily harm Towing Position Insert the tow bar which is stowed at the base of the Mobile Shield and rotate the unit onto the tires V 07242015B Moving from deployed position to towing position Mobile shield is ready to transform 3 AE Wie et 1 Place locking pins in rear castors V 07242015B 2 Remove hitch bar py 7 V 07242015B 4 Fold unit over I Er TE de he TEE are ge p 7 pg EO ap V 07242015B rid ENI i ihe Li P Serai er nG NA An ka NG gt Er r n at 8A Bl ge a oe re o ae oe Pee Pt V 07242015B Attach the safety chain to the Mobile Shield s tow rod and attach the opposite end to the appropriate _ location on the vehicle Do not attach the chain to the handle bar 10 V 07242015B 10 Tow down the road not to exceed 35 mph Due to the narrow track of the travel tires take corners carefully and slowly Ls 11 Upon arrival reverse the above instructions Remember that the T pins must be secured in each and every position Interior Cleaning Instructions for Ballistic Glass 1 Rinse with clean water or glass cleaner to remove abrasive dust and dirt 2 Wash with soap or mild detergent using a soft cloth DO
Download Pdf Manuals
Related Search