User Manual KL 1600 LED (english)
Contents
1. object using flexible or self supporting movable light guides In accordance with the EN 62471 2008 standard the KL 1600 LED is a product of Risk Class 2 The KL 1600 LED fiber optic light source conforms to the following European directives 2006 95 EC Low Voltage Directive 2004 108 EC EMC Directive 2002 95 EC RoHS The technical documentation and full compliance with the standards listed below proves the conformity of the illumination system with the essential requirements of the following EC Directives EN 61010 1 2001 EN 61326 1 2006 EN 55011 2009 EN 61000 3 2 2006 A1 2009 A2 2009 EN 61000 3 3 2008 A Safety information Please read and obey these instructions carefully The instrument s safety cannot be guaranteed if they are not obeyed Never look directly into the open light guide socket or the light guide exit during operation danger of ophthalmic injury 4 10 KL 1600 LED Operating instructions The KL 1600 LED emits high intensity visible light Because light absorbing materials have the physical property of converting incident light into heat damage can arise to heat sensitive or flammable light absorbing materials To avoid such thermal damage and the potential danger of fire or burns please obey the following instructions e Never cover up the light guide socket or light guide exit danger of fire e Never cover up the open light guide socket or light guide exit with your hands or other parts2. of the body danger of burns e When illuminating heat sensitive or flammable light absorbing objects e g in microscopy special care must be taken to ensure that an appropriate suitable distance between light guide and object and a suitable lamp brightness level are selected so that no thermal damage occurs e When the light source is switched on all light guide exists not being used in the working procedure must always be a safe distance at least 10 cm away from heat sensitive or flammable light absorbing materials prevention of possible danger of fire Care must therefore be taken that each light guide exit is at the above mentioned safe distance away from for example dark colored textiles and dark colored wooden or plastic surfaces e To avoid unnecessary stressing of biological tissue by illuminating with visible light reduce the brightness and duration of illumination to the absolute minimum required level Please make sure that your KL 1600 LED cold light source is operated at the voltage stated on the model plate 10 The light source has been developed for operation in dry rooms only see Point 6 Technical data The instrument must not be used in explosive areas Please ensure the air vents 7 9 are always kept free In the case of insufficient cooling an integrated thermo switch continuously regulates the light intensity see Point 4 Troubleshooting Safe disconnection from the power sup
3. 61010 1 and UL61010 1 standards 9 10 KL 1600 LED Operating instructions Lighting information Maximum effective light guide bundle diameter mm Total light flux at light guide exit SCHOTT light guide O 9 mm typical value Level 5 Color temperature Light exit angle 20 eff Conformity power supply CE UL PSE EMC emission class B We reserve the right to make changes in the design and supplied items within the scope of on going technical improvements WEEE declaration Your SCHOTT product was produced and developed with high quality materials and components The symbol indicates that electrical and electronic devices must be separated from domestic waste and appropriately disposed of after useful life SCHOTT AG Lighting and Imaging has arranged a waste management system for recycling Please use this system for removal and help to protect the environment we live in Further information regarding our waste management system please refer to www schott com lightingimaging recycle SCHOTT AG Business Unit Lighting and Imaging Otto Schott Strasse 2 55127 Mainz Tel 49 6131 66 0 10 10
4. KL 1600 LED Operating instructions SCHOTT KL 1600 LED Status April 2012 1 10 KL 1600 LED Operating instructions Contents 1 IMPORTANT INTORMMAUOM SES Een dame mi id Re 4 2 oY eL o g ER es eat ee ae ae eee 6 2 1 AQMP OUIGAS CONNECTION NU em ie 6 2 2 PONETCONN CIION id YR dn FC is nee miennes 6 2 2 olall Up DOCS ue a YN nn 6 24 LIGHTINIENSILTY SIN i GR RG RADYR RAOR 7 A FOE IGS eaae Y E 7 3 Maintenance Du E ADU O en ennui 8 4 TO UDISSMOOUIG se RER NE D de FE HN RYN 8 5 PICCOS SOMES nains a Giants dl 8 6 R CAHICAROAERS cv4 A 9 2 10 KL 1600 LED Operating instructions Instrument overview 2 2 ODD i O e a ee d meek Electronic light intensity setting On off switch Locking screw Light guide socket Carrying handle Mains connection socket back of instrument Ventilation grid back of instrument Filter slide Air vents base of instrument Model plate base of instrument Indicator light 10 2 4 2 3 2 1 2 1 2 2 2 9 2 3 3 10 KL 1600 LED Operating instructions 1 Important information Symbols used Warning of danger caution obey documentation Mains supply on off Intended use The KL 1600 LED cold light source is intended for industrial and laboratory applications Cold light sources are used for the intensive illumination of all types of objects High intensity visible light is guided to the
5. er functioning safety and optimum luminous efficiency can only be guaranteed with SCHOTT light guides and accessories Self supporting and flexible light guides are available in various lengths and diameters as well as spot and slit illuminations Optical filters can either by inserted in the filter slide or used as screw in or clip on filters in conjunction with a focusing attachment accessory in front of the light guide exit Details on the focusing attachment and available standard filter types can be found in our catalogue 8 10 KL 1600 LED Operating instructions 6 Technical data for KL 1600 LED Properties General information Type description Dimensions W x D x H Weight Cooling Ambient temperature Relative air humidity Air pressure Transport and storage Temperature Rel air humidity Air pressure Contamination level Electrical information Operating voltage frequency Input Voltage Power consumption max Protection class Overvoltage category Diodes LED nominal output Average LED lifetime LED Level 5 KL 1600 LED approx 231 x 114 x 137 approx 2 45 Axial fan 5 40 Up to 31 C ambient temperature 85 From 31 C to 40 C ambient temperature decreasing linearly to 75 1060 70 95 non condensing 1200 47 63 Hz 24 DC max 37 LS Le Osram Ostar Compact 7X45 50 000 luminous flux reduced to 70 Test conditions of DIN EN
6. nect power by pulling out the power plug 6 10 KL 1600 LED Operating instructions 2 4 Light intensity setting The brightness can be adjusted continuously by turning the light intensity setting Knob 1 Six step intensity control is possible from O 5 The highest brightness is reached at the end stop at position 5 When the brightness control is set at O there is no more brightness i e the lamp is off Attention Please note that when the brightness control is set at O the instrument is not switched off When the instrument is switched on the green control light 11 is lit To switch off the KL 1600 LED by pressing the on off switch 2 once see point 2 3 Start up procedure Please ensure safe power disconnection by pulling out the power plug 2 5 Filter slide The KL 1600 LED has a filter slide 8 which can be fitted with an insert filter from the filter set available as accessory When operating the light source the filter slide must always be engaged in one of the end positions or in the rest position This is the only way to guarantee optimum air cooling of the light source Operating the light source with the filter slide in an intermediate position can cause damage to the Slide Fitting the filter slide Please ensure the filter slide 8 has cooled down before fitting the insert filter Completely pull out the filter slide 8 from the light source and slot the required filter from the filte
7. ply occurs only by pulling out the mains plug The instrument may neither be opened nor dismantled Technical modifications are forbidden Repairs must only be carried out by the manufacturer or by its authorized customer service agency Please ensure that every user of the system has quick access to these operating instructions The manufacturer is not liable for damage caused by failure to obey these instructions 5 10 KL 1600 LED Operating instructions 2 Operation 2 1 Light guide connection A First loosen the locking screw 3 on the light guide socket 4 by turning it anti clockwise Insert the light guide as far as the stop and tighten the locking screw 3 by turning it clockwise Please note When inserting light guides with a locating pin care must be taken to ensure that the pin fits into one of the two guide slots 2 2 Power connection Insert the hollow plug of the supplied power cord into the plug in socket 6 of the light source Please take care to ensure that you only operate your KL um 1600 LED light source with the power cord provided e e Switch on off the KL 1600 LED by pressing the on off switch 2 When the instrument is switched on the green control light 11 is lit The plug connection of the power supply is interchangeable for the EU UK US or AU This is connected to the mains supply 100 240 V AC 50 60 Hz 2 3 Start up procedure Please discon
8. r set into the provided holder ensuring the filter is lying flat in the holder Push the filter slide as far as the stop to ensure the filter is positioned in the optical light path If you wish to operate the light source for a short time without a filter then only pull the slide out to the first rest position In this position the filter is still in the light source but no longer in the light path 7 10 KL 1600 LED Operating instructions 3 Maintenance Your KL 1600 LED is maintenance free The light source should not be disinfected for use in medical applications To clean the outside of the instrument please use a soft dry cloth or commercially available plastic cleaning cloths 4 Troubleshooting Should you be unable to rectify the faults by the measures listed below please contact your specialist dealer or the nearest SCHOTT agency More extensive repairs must be carried out by an authorized after sales service Lamp out Instrument not switched on Switch instrument on Plug not in socket Plug in socket No mains electricity voltage Check mains voltage Light intensity dropping Electronics overheated Switch off instrument Ensure adequate cooling switch on again after prolonged cooling time 5 KL 1600 LED accessories A wide range of accessories is available for your KL 1600 LED Please see our separate catalogue for further details contact address for additional requirements can be found on page 10 Prop
Download Pdf Manuals
Related Search