QNAP RAID Expansion Enclosure Hardware User Manual
Contents
1. Connect the QNAP NAS to the REXP 1220U RP If one REXP 1200U RP enclosure is configured connect storage expansion ports on the NAS to the expansion port of the enclosure Connect the REXP 1220U RP to other REXP 1220U RP If two REXP 1220U RP enclosures are configured connect one of the mini SAS ports to a port on the other REXP 1220U RP using the external Mini SAS cable SFF 8644 Note An optional storage expansion card is required on the QNAP NAS An example of connecting a QNAP NAS to four REXP 1200U RP enclosures is shown below 2 Turbo NAS f E 33s iy Nn A gii Ui DH Lt DA D Storage expansion ports REXP 1200U RP IN OUT REXP 1200U RP Connect the QNAP NAS to the REXP 1200U RP If two or above REXP 1200U RP enclosures are configured connect the two storage expansion ports on the NAS to two REXP 1200U RP enclosures for maximized performance Connect the QNAP NAS to the REXP 1200U RP Connect the storage expansion port on the QNAP NAS to the IN port of a REXP 1200U RP using the external Mini SAS cable SFF 8088 Note Optional storage expansion card is required on the QNAP NAS Connect the REXP 1200U RP to another REXP 1200U RP Connect a Mini SAS cable SFF 8088 from the OUT 4 port of the REXP 1200U RP to the IN 609 port of another REXP 1200U RP E Caution Do not connect an OUT port to another OUT port or an IN port 46 to anoth2. QNAP RAID Expansion Enclosure Hardware User Manual 2015 QNAP Systems Inc All Rights Reserved 2015 07 17 Thank you for choosing QNAP products This user manual provides descriptions of the hardware of the QNAP RAID expansion enclosure and relevant guidelines of certain functions Please read this manual carefully and strictly adhere to its instructions This user manual is applicable to the following RAID expansion enclosure s REXP 1220 RP REXP 1620 RP REXP 1200U RP REXP 1600U RP REXP 1000 Pro Note e The product you purchased may not support certain functions dedicated to specific models e All features functionality and other product specifications are subject to change without prior notice or obligation e Information presented is subject to change without notice e No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means mechanical electronic photocopying recording or otherwise without prior written permission of QNAP Systems Inc e QNAP and the QNAP logo are registered trademarks of QNAP Systems Inc Other products and company names mentioned herein may be the trademarks of their respective companies DISCLAIMER In no event shall the liability of QNAP Systems Inc QNAP exceed the price paid for the product from direct indirect special incidental or consequential software or its documentation QNAP makes no warranty or repre
3. alli mill 6 System over Flashes The disk data is being accessed green The hard disk drive is ready Table 1 Description of RAID Expansion Enclosure LEDs 20 3 2 REXP 1220URP and REXP 1620U RP Rear view i LI xim a X E In ETE s 3 Md ee BO 73 J li M os Hae Se eo A s X c OLX Y x I XXX zs oo Yr DXX eo E I Z A COM Port Reserved Three mini SAS ports Power Switch 6 Enclosure ID Power Connection Link Fault Amber Amber Port linked but without all four lanes 21 Flash amber SAS cabling error No faults have occurred 3 3 REXP 1200U RP and REXP 1600U RP Rear view ssssn HIERHER REXP 1200U RP REXP 1600U RP COM Port Reserved IN Port IN OUT Port Status LED OUT Port Power Switch Enclosure ID Power Connection 22 Link Fault Amber Amber Port linked but without all four lanes Flash amber SAS cabling error Of No fault has occurred Table 2 RAID Expansion Enclosure IN OUT Port Status LEDs 23 3 4 REXP 1000 Pro Front view s Release patton SSSOSC S S E Caution e Always turn on the RAID expansion enclosure before turning on the attached NAS e Always shut down the NAS before turning off the RAID expansion enclosure 24 o ste Description Amber Amber Syste
4. www qnap com pro compatibility as LED Front panel Status fault system over heat fan error Indicators Rear panel SAS link SAS error enclosure ID Form Factor 2U rackmount 3U rackmount 88 H x 439 W x 520 D mm 130 H x 442 4 W x 528 3 D mm 3 46 H x 17 28 W x 20 47 D 5 12 H x 17 42 W x 20 80 D inch inch Net weight 14 8 kg 32 63 Ib Net weight 18 14 kg 39 99 Ib Gross weight 21 99 kg 48 48 Ib Gross weight 25 92 kg 57 14 Ib Sound Level Standby 43 3 dB Standby 30 1 dB In operation 44 1 dB In operation 41 5 dB with 12 x 1TB hard drive installed with 16 x 1TB hard drive installed Power Idle mode 105W Idle mode 199W Consumption In operation 147W In operation 289W with 12 x 500GB hard 15 REXP 1200U RP REXP 1600U RP drive installed with 16 x WD WDCWD20EVDS 2 hard drive installed Relative 5 95 Humidity Input 100 240V AC 50 60Hz Output 600W Reserved for system maintenance 3 x 6 cm smart cooling fan Management Supports disk S M A R T information via NAS RAID expansion enclosure identifier Locate RAID expansion enclosures Locate hard disks on RAID expansion enclosures Smart fan control In band SAS firmware update Remark The rackmount RAID expansion enclosure complies with ANSI EIA RS 310 D rack mounting standards Before purchasing the server racks for this model please make sure the server racks conform to the following criteria Rack size d M
5. 1200U RP AND 1 600 cc cece IH Hmmm nmm mmm mm mmm 10 1 252 oRESSPUODAPERO CU deen CER tees rec p tect ewes Leet 11 CHAPTER 2 HARDWARE SPECIFICATION 2 2 nn nnhnhuhuhnuhnhnhnhnhnh nnn 13 2 1 REXP 1220U RP AND 1620 cece Hm HmHmHm Hmm hmmm hm hh nnn 13 2 2 REXP 1200U RP AND REXP 1600U RP eee n n Hmmm mnm Hmm 15 Ev atro were o we 17 CHAPTER 3 RAID EXPANSION ENCLOSURE HARDWARE ILLUSTRATION 19 Saks FRONT deno ares 19 3 2 REXP 1220URP AND REXP 1620U RP REAR VIEW nn m Hmmm 21 3 3 REXP 1200U RP AND REXP 1600U RP REAR 22 3 4 REXP T000 PRO FRONT VIEW 21 aa 24 3252 REXP I000 PRO REAR 26 CHAPTER 4 CABLE THE SYSTEM n 27 Ack CABMING INSTRUCTIONS siniraman aa aa ait del eet ie te deel aa EDI DU D 2 4 2 SAS CABLE hehehe hh hehehe sususesesesesesesesesesesesesesesese nes 30 CHAPTER 5
6. D20EVDS 2 hard drives installed Relative 5 95 Humidity Input 100 240V AC 50 60Hz Output 650W Reserved for system maintenance 3 x 6 cm smart cooling fan Management 1 Supports disk S M A R T information via NAS RAID expansion enclosure identifier Locate RAID expansion enclosures Locate hard disks on RAID expansion enclosures Smart fan control In band SAS firmware update Remark The rackmount RAID expansion enclosure complies with ANSI EIA RS 310 D rack mounting standards Before purchasing the server racks for this model please make sure the server racks conform to the following criteria Rack size a Mounting post width 2 450mm b Panel width 2 500mm c Mounting post depth 650mm 850mm 50mm 850mm C 14 Model REXP 1220U RP REXP 1620U RP 2 The optional rack kits for the rackmount RAID expansion enclosure are only compatible with square hole server racks cs LS E IN ry 3 Mat LE 5 ia i i 2 2 REXP 1200U RP and REXP 1600U RP Model REXP 1200U RP REXP 1600U RP Host Two SAS 4x wide port IN port OUT port Interface 12 x 3 5 inch SAS SATA 6Gb s 16 x 3 5 inch SAS SATA 6Gb s SAS SATA 3Gb s hard drive or SAS SATA 3Gb s hard drive or 2 5 inch SAS SATA SSD hard drive 2 5 inch SAS SATA SSD hard drive Note The standard system is shipped without hard drives For the hard Hard Drive drive compatibility list please visit
7. REMOVE AN AIR DUCT APPLIED TO REXP 1600U RP 31 CHAPTER 6 INSTALL REMOVE A FAN 32 6 1 INSTALL A FAN MODULE APPLIED TO REXP 1600U RP REXP 1200U RP REXP 1620U RP einen demo Didi atenadesqedtetenad md d 32 6 2 REMOVE A FAN MODULE APPLIED TO REXP 1620U RP REXP 1220U RP REXP 1600U RP AND REXPEST2O0DUSRP IR PM 32 CHAPTER 7 INSTALL POWER SUPPLY UNIT APPLIED REXP 1600U RP REXP 1200U RP REXP 1620U RP AND REXP 1220U RP 33 TECHNICAL SUPPORT ANS a RES KR MM EE KE 35 10 11 12 Safety Warnings The RAID expansion enclosure can operate normally in the temperature of 09C 409C and relative humidity of 5009 9506 Please make sure the environment is well ventilated The power cord and devices connected to the RAID expansion enclosure must provide correct supply voltage 100 127 200 240V AC Do not place the RAID expansion enclosure in direct sunlight or near chemicals Make sure the temperature and humidity of the environment are within normal levels Unplug the power cord and all connected cables before cleaning Wipe the RAID expansion enclosure with a dry towel Do not use chemical or aerosol to clean the RAID expansion enclosure Do not place any objects on the RAID expansion enclosure to ensure normal operation and to avoid overheating Use the flat head screws i
8. er IN port 60 28 An example of connecting a QNAP NAS to four REXP 1000 Pro enclosures is shown below Turbo NAS 2o a Storage expansion ports REXP 1000 Pro REXP 1000 Pro ld I i A aS fe KESON oi GMM 2 p BIR NE n QUO URANA Om IN OUT Connect the QNAP NAS to the REXP 1000 Pro If two or above REXP 1000 Pro enclosures are configured connect the two storage expansion ports on the NAS to two REXP 1000 Pro enclosures for maximized performance Connect the QNAP NAS to the REXP 1000 Pro Connect the storage expansion port on the QNAP NAS to the IN port of a REXP 1000 Pro using the external Mini SAS cable SFF 8088 Note Optional storage expansion card is required on the QNAP NAS Connect the REXP 1000 Pro to another REXP 1000 Pro Connect a Mini SAS cable SFF 8088 from the OUT port of the REXP 1000 Pro to the IN 69 port of another REXP 1000 Pro E Caution Do not connect an OUT port to another OUT port or an IN port 46 to another IN port 60 29 4 2 Mini SAS Cable Removal Follow the steps below to remove the Mini SAS cable 1 Pull up the restraining clip latch of the Mini SAS cable 2 Remove the Mini SAS cable from its restraining clip B j 30 Chapter 5 Remove an Air Duct Applied to REXP 1600U RP Unlatch the air duct with your thumb and index finger Pull the air duct upward to disengage it f
9. m fault detected overheat fan error power supply unit fails or is plugged out etc No fault has occurred Amber The system overheat System over Of No fault has occurred Heat Of Fan Error f f No fault has occurred f OF ooo Amber Amber Port linked but without all four Eee Flash amber SAS cabling error Of No fault has occurred Amber Amber Port linked but without all four Eee Flash amber SAS cabling error Off No fault has occurred Hard Drive Red Green Flashes red The disk data is being accessed and a read write error occurred during the process A hard disk drive read write error ulli duin Flashes The disk data is being accessed The hard disk drive is ready Table 1 Description of RAID Expansion Enclosure LEDs 25 3 5 REXP 1000 Pro Rear view lt ele SS Power Connection Power Switch EN 3 K lock IN Port OUT Port 6 COM Port Reserved System Cooling Fan 26 Chapter 4 Cable the System 4 1 Cabling Instructions An example of connecting a QNAP NAS to four REXP 1200U RP enclosures is shown below NAS y PE fe SSCCSCCCCCCCSS mo S 355 Se uu wWW X uL socccces mm m bic evo E EP HE 5 TTY DOE CCT rr es p Rees gp RE e jb Ur i AUN mH 2
10. n the product package to lock the hard disks in the RAID expansion enclosure when installing hard disks for proper operation Do not place the RAID expansion enclosure near any liquid Do not place the RAID expansion enclosure on any uneven surface to avoid falling off and damage Make sure the voltage is correct in the location where the RAID expansion enclosure is installed Contact the distributor or the local power supply company for more information Do not place any object on the power cord Do not attempt to repair the RAID expansion enclosure Improper disassembly of the product may expose the users to electric shock or other risks For any enquiries please contact the distributor The RAID expansion enclosure should only be installed in the server room and maintained by authorized server managers or IT administrators The server room should be locked by key or keycard access and only certified staff allowed access Warning Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Dispose of used batteries according to the manufacturer s instructions Do NOT touch the fan inside the RAID expansion enclosure to avoid serious injuries The RAID expansion enclosure is heavy and should be installed into a rack by at least two people To avoid personal injury and or damage to the equipment do not attempt to lift and install the enclosure into a rack witho
11. ning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio television technician for help The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Shielded interface cables if any must be used in order to comply with the emission limits 4 Class B only Symbols in this document A This icon indicates the instructions must be strictly followed Failure to Warning do so could result in injury to human body or death This icon indicates the action may lead to disk clearance or loss OR d failure to follow the instructions could result in data damage disk Caution damage or product damage Table of Contents SAFETY WARNINGS sasnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn n 7 BEFORE YOU START airina a aaa aaa a FEE aaa aaa 9 CHAPTER 1 PACKAGE 10 1 1 220 5 xi iR EIE IIR YD ieee lee 10 1 2 REXP
12. nt messenger Online Support http helpdesk qnap com Forum http forum qnap com Technical Support tn the U S and Canada Online Support http helpdesk qnap com TEL 1 909 595 2782 3 Address 166 University Parkway Pomona CA 91768 4300 Service Hours 08 00 17 00 GMT 08 00 Pacific Time Monday to Friday 35
13. ounting post width 450mm e Panel width 2 500mm f Mounting post depth 650mm 850mm 50mm 850mm C 16 Model REXP 1200U RP REXP 1600U RP 4 The optional rack kits for the rackmount RAID expansion enclosure are only compatible with square hole server racks L CJ L r X r Lm ari gm a LY LT 5 2 3 REXP 1000 Pro Host Two SAS 4x wide port IN port OUT port Interface Hard Drive LED Indicators Sound Level Power Consumption 10 x 3 5 inch SAS SATA 6Gb s SAS SATA 3Gb s hard drive 2 5 inch SAS SATA SSD hard drive Note The standard system is shipped without hard drives For the hard drive compatibility list please visit http www qnap com pro compatibility as Status system over heat fan error SAS IN SAS Out enclosure ID 217 H x 327 W x 321 2 D mm 8 56 H x 12 8 W x 12 65 D inch Net weigh 14 8 kg 32 63 Ib Goss weigh 21 99 kg 48 48 Ib Standby 24 5 dB In operation 34 6 dB with 10 x 1TB hard drive installed Idle mode 63 6W In operation 168 92W with 10 x 500GB hard drive installed 17 Relative 5 95 Humidity Input 100 240V AC 50 60Hz Output 350W Reserved for system maintenance 2 x 12 cm smart cooling fan Management Supports disk S M A R T information via NAS RAID expansion enclosure identifier Locate RAID expansion enclosures Locate hard disks on RAID expansion enclosures Sma
14. rom the RAID expansion enclosure 31 Chapter 6 Install Remove a Fan Module 6 1 Install a Fan Module Applied to REXP 1600U RP REXP 1200U RP REXP 1620U RP REXP 1220U RP Insert a fan module into the fan slot until the fan module is fully seated A Warning To avoid system overheating replace the fan module within 3 minutes Do not attempt to operate the system without operational fan module s 6 2 Remove a Fan Module Applied to REXP 1620U RP REXP 1220U RP REXP 1600U RP and REXP 1200U RP Remove the fan module by grasping and pulling up the fan module from the fan slot 32 Chapter 7 Install Power Supply Unit Applied to REXP 1600U RP REXP 1200U RP REXP 1620U RP and REXP 1220U RP A Warning The RAID expansion enclosure supports replacing a redundant power supply unit without turning off the enclosure when the redundant power supply mode is enabled However users are strongly recommended to turn OFF the RAID expansion enclosure before replacing the power supply unit to reduce the risk of electric shock To replace a failed power supply unit follow the steps below 1 Turn off the RAID expansion enclosure 2 Hold the black handler and press and hold the green button firmly 3 Unplug the failed power supply 33 4 Plug in a new power supply 5 Turn on the RAID expansion enclosure 34 Technical Support QNAP provides dedicated online support and customer service via insta
15. rt fan control In band SAS firmware update 18 Chapter 3 RAID Expansion Enclosure Hardware Illustration D Caution Modifying the hardware software or firmware of QNAP products will void the warranty ONAP is not responsible for any form of damage or loss of data caused by users modifying QNAP products Users should bear their own risks of all sorts of possible data loss or system instabilities due to changing hardware parts modifying the default system firmware or installing any unauthorized third party applications on QNAP products 3 1 Front view REXP 1600U RP REXP 1620U RP 19 LED Indicators System status system fault system over heat fan error Hard Drive LEDs Tray Lock Release Button Hard Drive Tray D Caution e Always turn on the RAID expansion enclosure before turning on the attached NAS e Always shut down the NAS before turning off the RAID expansion enclosure Cor Ste Description j Green The system is ready system Flash green The system is starting up Status The system is off The system is of A Amber Amber System fault detected overheat fan system Fault error power supply unit fails or is plugged out etc The system overheat Off No fault has occurred Heat ri i Fan Error lof No fault has occurred Hard Drive Red Green Flashes red The disk data is being accessed and a read write error occurred during the process A hard disk drive read write error
16. sentation expressed implied or statutory with respect to its products or the contents or use of this documentation and all accompanying software and specifically disclaims its quality performance merchantability or fitness for any particular purpose QNAP reserves the right to revise or update its products software or documentation without obligation to notify any individual or entity Note e Back up your system periodically to avoid any potential data loss QNAP disclaims any responsibility of all sorts of data loss or recovery Should you return any components of the RAID expansion enclosure package for refund or maintenance make sure they are carefully packed for shipping Any form of damages due to improper packaging will not be compensated Regulatory Notice FC FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by tur
17. tional purchase 12 Chapter 2 Hardware Specification The physical specifications operating environment and power requirements of the RAID expansion enclosure are listed below 2 1 REXP 1220U RP and REXP 1620U RP Model REXP 1220U RP REXP 1620U RP Host Three SAS 4x wide port SFF 8644 Interface Hard Drive 12 x 3 5 inch SAS SATA 6Gb s 16 x 3 5 inch SAS SATA 6Gb s SAS SATA 3Gb s hard drives or SAS SATA 3Gb s hard drives or 2 5 inch SAS SATA SSD hard 2 5 inch SAS SATA SSD hard drives drives Note The standard system is shipped without hard drives For the hard drive compatibility list please visit www qnap com pro compatibility as LED Front panel Status fault system over heat fan error Rear panel SAS link SAS error enclosure ID Indicators Form Factor 21 rackmount 3U rackmount 88 H x 439 W x 520 D mm 130 H x 442 4 W x 528 3 D mm 3 46 H x 17 28 W x 20 47 D 5 12 H x 17 42 W x 20 80 D inch inch Net weight 14 8 kg 32 63 Ib Net weight 18 14 kg 39 99 Ib Gross weight 21 99 kg 48 48 Ib Gross weight 25 92 kg 57 14 Ib Sound Level Standby 43 3 dB Standby 30 1 dB In operation 44 1 dB In operation 41 5 dB with 12 x 1TB hard drives with 16 x 1TB hard drives installed installed Power Idle mode 105W Idle mode 199W Consumption In operation 147W In operation 289W with 12 x 500GB hard 13 REXP 1220U RP REXP 1620U RP drives installed with 16 x WD WDCW
18. ut a mechanical lift and or help from other people Before You Start The RAID expansion enclosures can ONLY be used with the QNAP Turbo NAS Install the hard drives in sequential order following the tray number The RAID expansion enclosures are applicable to the TS x79 and TS ECx80 Turbo NAS series Always turn on the RAID expansion enclosures before turning on the attached NAS Always shut down the NAS before turning off the RAID expansion enclosures Chapter 1 Package Contents 1 1 REXP 1220U RP and REXP 1620U RP The product package contains the following items Quantity REXP 1220U RP or REXP 1620U RP La 65454565 45 65 65 Screw pack 656545 69 65 Sd 45 45 654565 69 65 60 65 69 Say Way Way Woy Wa tay Quick Installation Guide 0 5m Mini SAS cable Rail kit optional purchase Storage expansion card optional purchase 1 2 REXP 1200U RP and REXP 1600U RP The product package contains the following items REXP 1200U RP or REXP 1600U RP un 6545656545 65 45 Screw pack Quick Installation Guide 0 5m Mini SAS cable Hardware Installation CD Rail kit optional purchase Storage expansion card optional purchase 1 3 REXP 1000 Pro The product package contains the following items REXP 1000 Pro peers 4 o 11 oe Quick Installation Guide 0 5m Mini SAS cable Hardware Installation CD Storage expansion card op
Download Pdf Manuals
Related Search