Part No. 98336: Mounting Adapter for 4 Axis Robots
Contents
1. Henkel Corporation 1001 Trout Brook Crossing i Rocky Hill CT 06067 Technologies USA ITE Part No 98336 Mounting Adapter for 4 Axis Robots Phone 860 571 5174 Fax 860 571 5131 Equipment customerservice loctite com Description The 98336 mounting bracket kit is designed for holding one mounting bracket when using Loctite 4 axis robots The top of the adapter connects to the R axis via both an assembly screw and a set screw to ensure that it holds its position robustly The bottom of the adapter has a 360 degree rotation kit which allows the user to choose any angle for the dispense tip This tip does not align the dispense point under the R axis of rotation so it is not compatible with rotating during a continuous path bead dispense If that is required Loctite can provide a custom fixture for your specific application Includes Note Shaded items not included 1 Mounting adapter for 4 axis robots a M5 x 12 mm socket head cap screw Instructions for Use sa cee aa oS 8 9 Remove the two flat head screws from the C rail on mounting bracket kit Disassemble the 360 adapter at the bottom of the 4 axis mounting adapter by loosening the two set screws Place the male component of the 360 adapter over the mounting bracket clamping block Attach the male component of the 360 adapter to the mounting bracket clamping block using the two flat head screws provide Re assemble the 360 degree2. adapter and tighten the two set screws Initialize the robot to set the R axis at its home position Assemble the mounting adapter with the R axis shaft and loosely put the M5 x12 mm socket head cap screw through the bottom of the mounting block Set the orientation as desired then tighten the set screw Tighten the screw through the bottom of the mounting block Parts and Accessories Please see the other side for required parts that must be ordered separately and optional accessories Page 1 of 2 Henkel Corporation 7 1001 Trout Brook Crossing Rocky Hill CT 06067 Technologies USA Phone 860 571 5174 Fax 860 571 5131 Equipment customerservice loctite com LOE Required Must Be Purchased Separately Optional Accessories Mounting Bracket Kits These are used to grasp Tip Locator Bracket The tip locator bracket is used to syringe barrels 300 ml cartridges or dispense valves mechanically set the tip height during installation so that the program does not need to be corrected after a tip 6 change These are sized for 1 long 25 gauge needles 98316 30 and 55 ml syringe mounting bracket kit and must be modified by the user for larger gauge sizes 98318 300 ml cartridge mounting bracket kit 98327 _ 97113 and 97114 valve mounting bracket kit 98332 Tip locator bracket for 30 ml syringe 98406 983914 valve mounting bracket kit 98333 Tip locator bracket for 300 ml cartridge 98334 Tip locator bracket f
3. or 98009 and 98013 valve 98335 Tip locator bracket for 97113 and 97114 valve 98407 Tip locator bracket for 983914 valve 98326 98009 and 98013 valve mounting bracket kit PartNo Description Literature Sheet 988576 Rev A 03 2004 Page 2 of 2
Download Pdf Manuals
Related Search