[Product Name]
Contents
1. Email Settings Sender email Address email address of the sender of notification emails Recipient email address email address of the receiver of notification emails Only one email address can be entered Server address the address of the email server can be an IP address User Name the user name of the email account Password the password of the email account Server Port the port of the email server Test Click this button to send a test email Emails will only be sent if all parameters are entered correctly FTP Settings Server Address the address of the FTP server Server Port the port number of the FTP server default is 21 User Name the user name of the FTP account Password the password of the FTP account FTP folder name the name of the folder on the FTP site which video files will be stored in NAS Settings Server Address the address of the NAS server User Name the user name of the NAS account Password the password of the NAS account Folder name the name CIFS account folder on the server Click OK to save or Cancel to abort the changes before you leave the page Surveon Network Camera User Manual 31 Surveon CAM4210 Motion Detection Motion detection is activated by checking the Enable motion detection box Surveon N Day amp Night Megapixel Network Camera A3 General Event Notification Motion Detection able modo tion E E En n detec gt Video amp Aud2. Surveon 2010 04 06 20 08 32 an email Firmware Upgrade There are 2 ways to upgrade the firmware m Upgrading through firmware stored locally on a PC m Upgrading through firmware stored in a microSD card If upgrading through firmware stored locally enter the path of the file in the provided field or click Browse to find the file Surveon e Day amp Night Megapixel Network Camera ngoni help admin 2010 03 12 21 18 24 gt General System Firmware Upgrade Network Firmware Upgrade Video amp Audio Specify the firrnware to upgrade Browse ore Specify the firrnwar pgrade IS j microSD card slot 1 Path microSD Card1hesofw bin Recording Event Notification Configuration upgrade Y System x Keep customized configuration microSD Card Management Upgrade all configurations System Status System Log gt Firmware Upgrade Reset To Factory Default Exportimport amp Reboot Upgrade Cancel Select Keep customized configuration to keep current configuration settings or Upgrade all configurations to clear all settings back to factory defaults Click Upgrade to start the upgrade Upon completion of firmware upgrade the system will prompt to reboot During the firmware upgrade the LED indicator in front of the camera will show steady amber When the LED indicator turns green the firmware upgrade is complete Click Cancel to exit without upgrading Surveon Network Camera User M
3. Video SLI GaMS ENEE 24 tere E LEE 25 A E E EEE EE eaten dt anata nae E E EE EE 26 PROC OC NO BEE 27 Recording Basic Settings EE 27 Recorded File Management 28 EVENE NOUMICALION EE 30 EVENT SEVO ebe Ee Ee Ee Sat 30 MOCION Kg E TEE ER Pampering Detection EE 34 Eeer 25 EVENE Se gg e Le EE 37 ELE 40 Micros Card Ei Le Eu WEE 40 VSL ER EE E EE 41 SECHER EEN 42 Firmware WG io Ce E ene eene ech eege 43 Reset to Factory Default cccccceeeecee eee eeeeeteeeeteeeeeeeeeeraneerenees 44 Export Import An ee 45 Chapter 1 Overview 1 1 Network Camera Introduction The CAM4210 is professional IP network camera which uses Internet Protocol IP to transmit video streams and control signals over a network Capable of operating both LANs and WANs this network camera provides a complete budget conscious remote surveillance solution that is ultra clear and highly integrated The camera provides users an easy upgrade path from a traditional analog surveillance system to the new digital surveillance system in a virtual environment The CAM4210 is user friendly and easy to install Utilizing a specialized Digital Signal Processor DSP the network camera also provides Motion Detection and Tampering Detection These powerful features make the CAM4210 ideal for environments that require remote surveillance or video transmission especially small residential or business premises 1 2 Network Camera Features m Supports up to 8 simultaneo
4. DS 236 96 30703 7 29 58 2 29 43 2 29 43 236 96 e AA RA EA NERS EH 236 96 a034 29 03 236 96 2 26 43 28 43 236 96 KEE SR KEE AR 236 96 KSE Ha Lk mA a Es RO 236 96 gek Caste oon Ioa Ia ARa Day amp Night Megapixel Network Camera STREAM Client IP 192 168 88 1 disconnnect video stream 0 STREAM Client IP 192 168 88 1 connnect video stream O UI user admin login success return O system ntp syn time fail system libntp so synntpserver syn time fail time 53 STREAM STREAM system system 53 system system 53 system system 53 system system 53 system system 53 system system 53 STREAM event ET PE E E EE Client IP 192 168 88 1 disconnnect video stream 0 Client IP 192 168 88 1 connnect video stream O0 ntp syn time fail libntp so synntpserver syn time fail time ntp syn time fail libntp so synntpserver f ntp syn time fail libntp so synntpserver ntp syn time fail libntp so synntpserver i ntp syn time fail libntp so synntpserver ntp syn time fail libntp so synntpserver Network link on net link up Emni L tem Log to technical support syn syn syn syn syn time time time time time fail fail fail fail fail Email clicking Download will download the log to the local PC time time time time time admin Download
5. Hardware Installation To install the network camera 1 Locate a suitable spot for installation 2 Connect the camera to a power source adapter or PoE 3 Connect the camera to a switch using an Ethernet cable Surveon Network Camera User Manual T Chapter 2 Connecting to the Camera This section demonstrates how to connect to the network camera through a Web Browser Streaming Media Player or with a mobile device using the 3GPP Protocol 2 1 Connecting with a Web Browser To connect to the Network Camera with a web browser 4 Launch the web browser Microsoft Internet Explorer 6 0 or higher Is recommended 5 Enter the IP address of the network camera in the address bar and press enter 6 The camera will prompt for a user name and password The default user name and password is admin admin If this is your first time accessing the camera please read the subsections to set up a new password and or install ActiveX otherwise the live feed from the network camera will be displayed in your web browser Surveon User Mame admin Password Seege Cancel Changing your Password If this is the first time that the network camera is being accessed the camera will prompt you to change the administrator password after your first login Click Okay Surveon Message from webpage E Use
6. The video files shown in Record File Management are files stored in the microSD card You can also record live video by clicking the record button in the Live View screen The default path for live video recordings is C Documents and Settings user My Documents Model Name There are 3 recording options for Event notifications FTP or Email Video clips will be stored onto an FTP site Remote Storage Video clips will be stored onto a designated location in the CIFS settings Local Video clips will be stored onto the microSD card Surveon Network Camera User Manual f Surveon CAM4210 Event Notification Event Notification includes the following Event Server Motion Detection Tampering Detection DI amp DO and Event Settings Event Server Surveon Day amp Night Megapixel Network Camera Logout Help admin 2009 09 29 17 54 58 General Event Notification gt Event Server gt gt Network Email Settings Video amp Audio Sender email address eg template intrefont com Reciplent email address eg template intrefont com PTZ Server address Recording SE x Event Notification Password Event Server Server port TeSt Motion Detection S FTP Settings Tampering Detection DI amp DO Server address Event Settings Server port User name System Password FTP folder name NAS Settings Server address 172 16 80 149 Username root Password eeee Folder name pool VolumeO1
7. Video amp Audio Restart the IP camera Apply PTZ Export configuration Export Recording Event Notification Import configuration Browse Apply system MicroSD Card Management System Status System Log Firmware Upgrade Reset To Factory Default gt Exportimport amp Reboot This section allows you to restart the camera as well as export and import Camera configuration details Restart the network camera Reset the camera settings by clicking Apply Export Configuration Export the camera s settings and configurations by clicking Export Import Configuration Imports previously exported camera settings The field should contain the path for the camera configuration file Click Browse to browse your PC for the configuration file Click Apply to import the settings Surveon Network Camera User Manual
8. compression format available in H 264 see EE MPEG4 and MJ PEG Will only apply to the current stream MI PEG Digital Zoom Zi IA administrator only sie vaea v Image size resolution Sets the resolution of the image 4 Re options are available SXGA 1280 x 1024 HD720 1280 x meis 720 VGA 640 x 480 QVGA 320 x 240 This setting will only apply to the current stream Note 1280 x 720 is not recommended as the sensor s vertical output will be cropped Surveon recommends use of SXGA 1280 x 1024 instead DigitalZoom Digital Zoom Digitally zoom in on the display when clicked 2 options are available when clicked T Zoom in Zoom out ER Digital Digital Output Turns on or off Digital Output Output High Low of same as Settings gt Event Notification gt DI amp DO Surveon Network Camera User Manual 13 Camera settings may be changed by clicking on the Settings link located in the title bar General General setting menus are found under the General title Basic Settings Basic settings may be accessed by clicking the Basic Settings link under General Main options include Host Name Camera Name gt LED Indicator Surveon Day amp Night Megapixel Network Camera Live View Logout Help admin 2009 09 27 12 41 59 S General General Basic Settings gt Basic Settings Host Name User Account Host name localhost Date amp Time Camera Name gt gt Network Came
9. of existing windows can also be changed by selecting the window and changing the settings To delete a window select a window in and click Remove By default the Motion Detection Active In setting is Auto You can also change it to Schedule to manualy change the motion detection settings Motion Detection Active In Auto Schedule J sun hon Tue Wied CI Thu L Fri J Sat From To 23 30 hh mm Select the days of the week that Motion Detection is active by checking the corresponding boxes and fill in a start time and end time for motion detection in the From and To boxes Click OK to save or Cancel to abort the changes before you leave the page Surveon Network Camera User Manual 33 Tampering Detection M Surveon Live View Logout Help General L Network gt Video amp Audio Tampering detection gt gt PTZ Trigger threshold Recording Sensitivity Interval y Event Notification Duration Event Server Motion Detection gt Tampering Detection DIS DO Event Settings System Day amp Night Megapixel Network Camera Event Notification Tampering Detection Tampering Detection Settings On j 95 5 sec v 5 sec v OK The Tempering Detection Parameters include admin 2010 04 16 18 36 10 Cancel Tampering detection turns on or off Tampering Detection Trigger threshold sets the trigger threshold of Tampering Detection ranges from 0
10. the video output 4 options are available SXGA HD720 VGA QVGA QQVGA Video frames per second Sets the number of frames per second Key frame interval Sets the period between key frames Video quality settings Sets the quality of the video image with 2 options Constant bit rate and Fixed quality There are 2 modes in the Video stream2 Settings Normal Mode and 3GPP Mode When selecting Normal Mode the default setting is the same as streaml Click OK to save or Cancel to abort the changes before you leave the page When selecting 3GPP Mode the settings for video stream2 is shown below None of the parameters can be changed Video Stream Settings Normal Mode 3GPP Mode Video format HIP EGA Video resolution OOVGA 160 x 120 Video frames per second Key frame interval id Video quality settings Constant bit rate 26kbps Fixed quality Medium Audio Settings Surveon Day amp Night Megapixel Network Camera Live View Settings Logout Help admin 2010 03 13 16 51 17 gt General Video E Audio gt Audio Network Mute Settings S Y Video amp Audio Mute O on gt off Basic Settings image Appearance Codec settings Video Streams ADPCM bit rate 3 2Kb ps De gt Audio PTZ Recording Lo o Cancel Event Notification System Mute Settings Select On to turn on Mute or Off to turn off Mute Codec Settings Select ADPCM bit rate of 8 16 32 48 or 64 Kbps Click OK to save or Can
11. zone GMT 12 00 Eniwetok Kwajalein b Video amp Audio 23 PTZ Time Settings Recording O Synchronized with NTP server gt gt Event Notification NTP server ate em System Periodically synchronize clock with internet servers Manual update Date Col Time Synchronize with computer time Date 2009 09 27 Time 12 54 48 Ok Cancel Current Date amp Time displays the current date and time of the camera Time Zone Settings Time zone can be set using the dropdown menu only selectable when synchronizing with an NTP server Time Settings There are 3 ways to set the time Synchronized with NTP server Synchronize with the NTP Server Clicking on Update will synchronize the current time with the NTP Server Select Periodically synchronize clock with internet servers to periodically synchronize with the server Manual update Update the time manually Synchronize with computer time Synchronizes the time with the computer s internal clock Click OK to save or Cancel to abort the changes before you leave the page Surveon CAM4210 Network Network Configuration Surveon Day amp Night Megapixel Network Camera Live View Logout Help Network Network Configuration admin 2009 12 18 10 30 38 gt gt General Y Network IP amp DNS Settings gt Network Configuration Get IP address automatically Port Settings Use fixed IP address UPnP IP address 192 168 5 22 Subnet mask 2
12. 55 255 2550 Video amp Audio Default gateway 192 168 1 253 she Primary DNS 61 139 2 69 Recording Secondary DNS 119 6 6 6 Event Notification See PPPoE Settings C Enable PPPoE Username Password Confirm password DDNS Settings C Enable DDNS DDNS service Host name User name Password OK Cancel IP amp DNS Settings Get IP address automatically Automatically acquires IP address If DHCP is supported and free IP is available this option allows the camera to automatically acquire an IP address both LAN and Internet Use fixed IP address Sets a fixed IP address Manually fill in IP address Subnet mask Default gateway Primary DNS and Secondary DNS The network camera can be connected to the network upon completion PPPoE Settings Connecting using PPPoE requires a user name and password from your ISP Select Enable PPPoE and fill in valid user name and password to connect the camera to the Internet Surveon Network Camera User Manual DDNS Settings Connecting using Dynamic DNS requires registration on third party websites for DDNS services Select desired DDNS service website check the Enable DDNS option and fill in valid user name and password You can then access the camera through the registered domain name Click OK to save or Cancel to abort the changes before you leave the page Surveon CAM4210 Port Settings This section includes HTTP Port Setting and RTSP Se
13. C Enable 9 Frompt D Download unsigned Activex controls 1 Disable Enable C Prompt wl Initialize and script Activex controls nok marked as safe Ey Disable Enable C Prompt EZ M wes M ebi s es bd e e zm Lass zm Les ze V Reset custom settings Reset to Medium 3 After installing ActiveX go to Tools gt Internet Options gt Trusted Websites gt Sites and add the IP Address of the camera 2 2 Connecting with an RTSP Player The CAM3260 supports connection through RTSP Media Players such as Real Player and QuickTime Player 1 Launch Real Player or QuickTime Player 2 Select File gt Open URL to open a URL dialog box 3 Enter the camera URL in the address bar Note The format for RTSP is rtsp 4P Address gt lt Access gt where lt Access gt can be found at Settings gt Network gt Port Settings gt RTSP Setting By default the lt Access gt value should be stream and streamz2 Type the location of a clip or web page and RealPlayer will open it for you Oper rhep 1 72 16 80 769 strean wi 4 Click OK the stream should begin playing 2 3 Connecting with a Mobile Device In order to access streaming video on 3GPP mobile devices please make sure the network camera is already online and connected to the Internet In the IP field under the IP Address section of the window enter the IPV4 address of the IP camera 1 Change the settings under Settings gt Vid
14. Email j Reset To Factory Default Exportlmport amp Reboot Clicking on Email will send the system status information out as an email Surveon Network Camera User Manual Surveon CAM4210 System log This section provides a log for all system related entries The log lists all visiting Information as well as changes to camera settings both successful and unsuccessful The information is very useful as it provides all traces of any access to the system and the cameras in order to provide evidence and information for analysis and diagnoses Surveon Live View General 2 Network Video amp Audio PTZ Recording gt Event Notification System microSD Card Management System Status gt System Log Firmware Upgrade Reset To Factory Default Exportlmport amp Reboot Log List Log List shows all logs clicking Email will send the log out as Logout Help System gt System Log Log List Dec 19 Dec 19 Dec 19 Dec 19 Dec 19 server Dec 19 Dec 19 Dec 19 Dec 19 Server Dec 19 Dec 19 Server Dec 19 Dec 19 server Dec 19 Dec 19 ISCEVOE Dec 19 Dec 19 server Dec 19 Dec 19 Server Dec 19 Dec 19 Roam 21 Note Send sys 23 23 23 23 23 64 23 23 23 23 64 23 23 64 23 23 64 23 23 64 23 23 64 23 23 64 23 23 303262 30 S12 EEE ASh Bi B 30303 5 SAS
15. N ENN EN ENN KEE AN 4 1 1 Network Camera Introduction zs age d Feed SEENEN Ee eege deeg 4 1 2 Network Camera Features cccccccccccccceceeeeeeeeeeeeeeeeeeeeeeeaeuauauauauags 4 1 3 Network Camera Specifications cccccesccecceccescneeeeecssnneeesessanneessonas 5 SV CERO gl Gil EE 7 1 4 Network Camera Hardware Installation sssssssnssnnnnnnnnnnnnnnnnnnnnnnnnnn 7 Chapter 2 Connecting to the Camera sssssnssssnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 8 2 1 Connecting with a Web Browser ssssssssnsnnnnsnnunununnnnnnunnnnnnnunnnnnnn 8 Changing VOUr PASSW Old EE 8 Changing your Raseword ccc cece cece ete e eee cette seen eee eee eeeeee eet eeeeeeeeetegegs 9 Installing Active A Componente cece ceee eee e eee eeeeeeeeeeeeeeeeeeeeeeetenenes 10 2 2 Connecting with an RTSP Player ssccscccccssceeeeecsscneeeessssnneeesseuaaes 11 2 3 Connecting with a Mobile Device ae KEEN KEEN EEN EE EE 11 Chapter 3 Web INTC AC Eege SEENEN EENS ENN 12 3 1 Interface Lee deeg Seege dE EEN red 12 Control Desc HONS EE 12 32 nd ue TEEN 14 Cts ee ee ee ee ee ee re 14 Basi SEULINGS EEN 14 EE CEET 15 WICH wn EE 16 OU W OI Kec neetna Ee Seed EE 17 Network Configuration cece eee se eet eeeeeeeeeetaeeeteeeeeeaeeetaneetenees 17 POM Sell MOSrerianericrnitdoesrtsedctagvecvirsianrnirvinesianersernitiasscvireiterins 19 UPOP ebe A EEN 20 VIGGO amp AUdIO SeCEINGS ett 21 D Surveon Surveon CAM4210 Basie DELEINGS EE 21 Made lege Le EE 22
16. Surveon CAM4210 Megapixel IR Dome Indoor Network Camera User Manual Release 1 2 April 2010 All Rights Reserved Surveon Technology 2010 Copyright Statement No part of this publication may be reproduced transmitted transcribed stored in a retrieval system or translated into any language or computer language in any form or by any means electronic mechanical magnetic optical chemical manual or otherwise without the prior written consent of Surveon Technology Inc Disclaimer Surveon Technology makes no representations or warranties with respect to the contents hereof and specifically disclaim any implied warranties of merchantability or fitness for any particular purpose Furthermore Surveon Technology reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation to notify any person of such revisions or changes Product specifications are also subject to change without notice Trademarks Surveon and Surveon logo are trademarks of Surveon Technology Inc Other names prefixed with NVR are trademarks of Surveon Technology Inc All other names brands products or services are trademarks or registered trademarks of their respective owners Surveon Network Camera User Manual 1 AND Aas E MA III itd wb VS D Table of Contents Bel Ode Le GN EE 1 LEI e CET 2 Chapter 1 OVErViCW ena ENNEN ERR EN REN ENN ENN EN ENN ENNEN KEN ENNE
17. anual Surveon CAI Reset to Factory Default Surveon N Day amp Night Megapixel Network Camera M4210 Logout Help admin General Network Video amp Audio PTZ Recording Event Notification x System microSD Card Management System Status System Log Firmware Upgrade gt Reset To Factory Default Exportimport amp Reboot System gt Reset To Factory Default Reset To Factory Default Resetall configurations to factory default Reset all configurations to factory default except Genf OK Cancel mtx j 2010 03 12 21 29 50 There are 2 types of reset You can either reset all settings and configurations or you can choose to keep the Network configuration and reset all other settings and configurations Click OK after choosing a reset option to perform a reset Alternately you may press the Reset button on the bottom of the camera to perform a complete reset of the camera To reset the camera by pressing the Reset button on the bottom of the camera press and hold the Reset button for 3 seconds During this time the LED indicator in front of the camera will blink in red Surveon Surveon CAM42710 SUT VeEON CAM4Z1U Export Import amp Reboot Surveon Day amp Night Megapixel Network Camera Live View Logout Help admin 2009 10 17 14 53 26 General System gt Exportimport amp Reboot Network Exportmport amp Reboot
18. c Settings Manual record to C ASurvean Record browse j eq C SurveoniRecord Recorded File Management Event Schedule Record Setting Event Notification EventSchedule record to microSD card Remote storage System Ok Cancel Memory card recording When Memory card Recording is turned ON video will automatically be recorded onto the microSD card if the network connection is lost When a network connection is re established recording will switch back to the remote destination If this feature is turned off there will be no recording at all when if network connection Is lost Manual Record Setting Defines the path for manual recording Event Schedule Record Setting Allows the user to set the destination for event schedule recording Click OK to save or Cancel to abort the changes before you leave the page Surveon Network Camera User Manual 21 Recorded File Management This section allows users to manage videos recorded on the microSD cards N Surveon Day amp Night Megapixel Network Camera Logout Help admin 2010 03 12 19 41 27 General Recording gt Recorded File Management Network Recorded File Management Video amp Audio From To MM DD hh mm Search PTZ Y Recording 2010_03_12_19_28_10 avi H264 Alarm Play Download Recording Basic Settings eg D 2010_03 12 19_34 38 avi H264 Alarm no _Play_ Download gt Recorded File Manag
19. cel to abort the changes before you leave the page Note Only Stream 1 supports audio Surveon Network Camera User Manual 25 PTZ The PTZ menu allows configuration of the RS 485 Control Surveon Day amp Night Megapixel Network Camera Live View 5 Logout Help admin 2009 09 29 10 52 47 gt Network RS 485 Settings Video E Audio Enable RS 485 control e PTZ decoder address 2 v PTZ ee PTZ protocol Pelco D v gt RS 485 Control de r 2 Baud rate 9600 v Recording Event Notification System Le Cancel Select Enable RS 485 control to activate the service PTZ decoder address The address ID of the PTZ decorder PTZ protocol The protocol used by the PTZ Pelco D or Pelco P Baud rate Sets the baud rate of the PTZ 2400 4800 9600 19200 11520 Click OK to save or Cancel to abort the changes before you leave the page Note If Enable RS 485 control is not checked the PTZ control panel will not Show on the live view interface op Surveon Recording The Recording menu deals with recording settings and managing recorded video files Recording Basic Settings Am Surveon Day amp Night Megapixel Network Camera Live View 5 Logout Help admin 2010 03 12 20 52 43 General Recording Recording Basic Settings Network Memory card Recording Video amp Audio Memory card recording on off PTZ Manual Record Setting Y Recording gt Recording Basi
20. e Event List and Schedule List By clicking Add under Event List or Schedule List you can add new conditions for Event triggering Choosing an event and clicking Edit will allow you to edit the conditions while clicking Remove will delete the event Surveon Set e Live View Logout Help admin 2010 04 16 18 40 19 General Event Notification gt Event Settings gt Add Triggered Events Network General Video amp Audio a Name PTZ Set min time interval between triggers 1 max 23 59 59 i Recording Enable Triggering By Event Notification Always Event Server Recurrence pattern Motion Detection Never Tampering Detection DIS DO Triggered By gt Event Settings z C Motion detection CT on boot System CI video loss amp Tampering detection CT Disk full O Di sensor Trigger Actions Streams Cl Email C FTP C Record C Trigger DO Surveon Network Camera User Manual General Name Specifies the name of the Event Minimum time interval between triggers Event List only The time frame in which a subsequent trigger of the same event will be ignored maximum 23 59 59 Set Time Interval Scheduled List only The time when this event will be triggered Respond to Trigger This specifies the frequency of trigger response 3 options are available Always The default setting triggers event when triggering conditions are met Only du
21. ement eee a ee Current Page Total Page 1 Forward To bac Lock Unlock Remove Event Notification Download Downloads video files Select one or more video files and click Download choose location to save the video file s onto your local PC Lock Unlock Locks Unlocks video files Locked files cannot be deleted Select one or multiple video files and click Lock Unlock When a file is locked the Locked status will display yes Remove Manually deletes stored video files Select one or more video files and click Remove to delete the file s lt lt Click to go to the first page of the recorded files list lt Click to go to the previous page of the recorded files list gt Click to go to the next page of the recorded files list gt gt Click to go to the last page of the recorded files list Media Type Click to select a compression format from the dropdown menu The system will only display video files of the selected format on the recorded files list To search video files during a specific period of time enter the begin and end time in the From and To fields below and click Search Note the format for time is YYYY MM DD hh mm ss Selecting a recorded file in the check box and clicking Play will play the video file Clicking Download will save a copy of the video file to your local PC Click OK to save or Cancel to abort the changes before you leave the page 28 Surveon Note
22. eo amp Audio gt Stream2 Setting to 3GPP Mode 2 Launch the RTSP Player on the 3GPP mobile device and enter the URL address for the camera The video should start playing Note The format for RTSP is rtsp 4P Address gt lt Access gt where lt Access gt can be found at Settings gt Network gt Port Settings gt RTSP Setting By default the lt Access gt value should be stream and streamz2 Surveon Network Camera User Manual 11 Surveon CAM4210 Chapter 3 Web Interface 3 1 Interface Layout This section demonstrates the layout of the network camera s main interface The 4 main areas on the interface include Main Menu Company Logo Main Control and Live Display Window Surveon Day amp Night Megapixel Network Camera Settings Logout Help O o r gn Streams 1 2 E Ee Type H264 w Size VGA 640x480 v DigitalZoom Digital z EZER Output H l Lon of Surveon CAN2200 2010 04 16 18 7 11 2 25 Gre R 3 mware V1 0 813 Control Descriptions Ea Adjust Window Size This feature is turned off by default when clicked the display window size can be adjusted manually to fit the screen The screen size changes back to the actual image size resolution Full Screen Turned off by default Goes to full screen mode when clicked press ESC to return to window mode I Image Capture Turned off by default when clicked captures the current scree
23. iew page If anonymous or free access is allowed anonymous users will have the same privileges as Operators Adding Accounts Clicking on Add will bring out the Add Account window New accounts will be activated when all information fields are completed Note User Names and Passwords can be in combinations of letters numbers TTT TT and 4 20 characters in length but must begin with an alphabet letter Up to 10 accounts can be added The admin account cannot be removed Users that are logged in cannot be edited or removed Editing Accounts First select an account and click Edit this will bring out the Edit Account window All information except the Account Name can be changed here Deleting Accounts First select an account and click Remove to delete the account Enable Free Access Without Login Check this option to allow anonymous access without a password Click OK to save or Cancel to abort the changes before you leave the page Surveon Network Camera User Manual 15 Date amp Time The three main parts of this section include Current Date amp Time Time Zone Settings and Time Settings Surveon Day amp Night Megapixel Network Camera Live View 5 Logout Help admin 2009 09 27 12 54 48 S General General gt Date amp Time Basic Settings Current Date amp Time User Account Date 1901 12 14 Time 05 44 45 gt Date amp Time Time Zone Settings gt gt Network Time
24. io PTZ Basic Settings RSC deen senngs A3 Recording window Y Event Nottic on Window neme Max number of wandow rut to Event Server Trigger interval 200MS v gt Moton Detection T P w wg 5 Tampering Detecdon ngger Mreshoid DI amp 00 Sensitmty jee 5 Event Setings New asme Remove System Motion Detection Active ix Ao Schedule Cancel The video displaying on the Event Notification Settings window is the live streaming video The active curve chart is displayed in the Active Status Display tab under Basic Settings Setup for windows is done in the Windows Settings tab The Activity Status Display shows the amount of motion detected in a selected window Basic Settings SO SS Suneon The Windows Settings interface is as follows Basic Settings ee Max number of windows limited tas Trigger interval 200M5 k Trigger threshold a sensitivity _ EEE 5 H uw Save Remove A maximum of 3 motion detection windows can be added in Windows Settings page by clicking New Enter the following parameters Window name the name of the motion detection window Trigger interval the time interval between motion triggers Options available from the drop down menu are 200MS 400MS 800MS and 1000MS Trigger threshold the threshold of motion triggers ranges from 0 to 100 Sensitivity The sensitivity of the motion triggers ranges from 0 to 100 Click Save to save all settings Settings
25. n as an image in a new pop up window and save it in the same folder for Manual Record The file name is set to be Camera Name yyyymmdd_hhmmss the Camera Name can be changed from Settings gt General gt Basic Settings CW Manual Record Turned off by default when clicked records the current live video Stops recording when clicked again The default locate for storing the recording is C Surveon Record 12 Surveon Play Back Turned off by default goes to the Record File Management page when clicked 49 Audio in Turned off by default allows audio to be transmitted to the camera side Click again to stop audio transmission Note Note Multiple users may access the live view page simultaneously and receive audio from the camera but only one user is allowed to send audio to the camera side at once Ch Mute Turned off by default turns off all audio when clicked turns audio back on when clicked again ni Volume Set to the current volume of the computer drag to adjust volume Language Language Settings default in English Choose the preferred language by selecting from the drop down menu administrator only Available languages include English Simplified Chinese and Traditional Chinese Steams 1 3 Streams Choose Stream Plays Stream 1 on the live view window when Stream 1 Is selected gt plays Stream 2 when Stream 2 Is selected steams 1 2 Video Format The
26. o amp Audio Video orientation CI Flip C Mirror gt Basic Settings Text Overlay Settings Image Appearance GE Include date Include time Camera name Audio Audio Settings gt gt PTZ Audio On Off Recording A9 Event Notification gt system SC Gel Basic settings Flip and Mirror allow you to flip and mirror the video Flip will flip the image vertically while Mirror will flip the image horizontally You may select both Flip and Mirror at the same time Text Overlay Setting Toggles text messages displayed over the video Include date will display the current date Include time will display the current time and Camera name will display the name of the camera You can display multiple text messages at the same time only camera name will show if the resolution is set to 160 x 120 Audio Setting Turns audio on or off Click OK to save or Cancel to abort the changes before you leave the page Surveon Network Camera User Manual 21 Image Appearance Sur veon Day amp Night Megapixel Network Camera Logout Help admin 2010 03 13 16 06 28 gt General Vidco amp Audio gt Image Appearance Network Image Appearence Settings Y Video amp Audio Image Adjustment Basic Settings gt lmage Appearance i 3 u 20 Video Streams Brightness Gna Audio PTZ Saturation eee 70 Recording Event Notification Contrast es jee 49 System Advanced Setting
27. o Dll and Dl2 outputs with the following 3 conditions m Normal Open DI requires a Low voltage input with the following configuration DI E GND m Normal Close DI requires a High voltage input with the following configuration They H DI m Off DI inputs are closed at all times The camera will not respond to any input signals Output corresponds to DO output with the following 2 conditions m On DO output is turned on with outputs in either High or Low voltage depending on the settings under Event Rules Please refer to Event Rules for more details 12V fa A DO DO output low DO output high m Off Closes DO outputs no signals will be sent out Conditions for DI Trigger DO can be set under Event Rules please refer to Event Rules for more details Surveon CAM4210 Event Settings Surveon i Day amp Night Megapixel Network Camera m Live view Logout Help admin 2009 10 17 11 13 55 General Event Notification gt Event Settings Network Event List Video amp Audio wen rem mm mem wer no Lee fre C l Add a Edit Remove PTZ Recording Y Event Notification Event germer Sechdule List Motion Detection Tampenng Detetioh Name Enable Condition toms DI amp DO en gt Event Settings System Event Settings includ
28. r Name admin Fees A You need to modify password Password esses Cal ance fi i 1 Click OK when informed of the need to change your password This will cause a Configure Admin Password popup to display Admin Account Mame Admin Old password New password RS 7 SE Confirm new password E E 2 Inthe Old password field fill in the old password default is admin 3 In the New password and Confirm new password field fill in the new password 4 Click OK to change the password If at any time you lose this password performing a hard reset of all camera settings will restore the password back to admin Surveon Network Camera User Manual Surveon CAM4210 Installing Active X components You may be prompted to install ActiveX components when accessing the network camera s Live View page click Yes when prompted You will be able to access the camera after installation is completed This action may require administrator privileges If the dialog box suggest that you are not allowed to install Activex components try resolving the problem using the following steps 1 In Internet Explorer open Tools gt Internet Options gt Security Click the Custom level button 2 Search for downloaded ActiveX controls and plug ins Select Prompt and click OK security Settings Settings wl 4Gctives controls and plug ins pl Download signed Activex controls Disable
29. ra name Camera UI200 Video amp Audio 23 PTZ LED Indicator Recording AU LED indicators on O of Event Notification gt System an Cancel Host Name by default set to model name MAC address displays on the center of the main page Camera Name by default set to model name after selecting Camera Name from Settings gt Video amp Audio gt Basic Settings the camera name will show on the display Note Host Name and Camera Name can be letters or numbers LED Indicator turns on or off the LED indicator on the camera Click OK to save or Cancel to abort the changes before you leave the page Surveon User Account The User Account section mainly controls the account information of the users and their privileges Available functionality includes Add Edit and Remove User Accounts Live View Logout Help admin 2009 09 27 12 48 30 S General General gt User Account Basic Settings User Account gt User Account User Name User Grounp Date amp Time admin Administrator Maximum number of administrator operator limited to 10 Network Add Edit Remove gt Video amp Audio User Login Settings gt PTZ Enable free access without login a gt Recording gt gt Event Notification System The system allows for 2 types of users Administrators and Operators Administrators have full privileges while Operators can only access the live v
30. ring time frame enables triggering only during specified time period Gi Only during time frame Toun O mon LC Tue O wea CI Thu L Fri Sat From To therm Select the days of the week that the trigger is active by checking the corresponding boxes and fill in a start time and end time for motion detection in the From and To boxes Never will never trigger events under any condition Triggered By Select the conditions that would trigger the Event Multiple conditions can be set at once Available options include Motion Detection trigger when motion is detected On Boot trigger when camera reboots Video Loss amp Tampering Detection trigger when video signal is lost or tampering is detected Disk Full trigger when disk is full DI Sensor trigger when DI occurs When Triggered This section specifies the actions to take when conditions in Triggered By are met options are Email emails notifications to specified email address If this is chosen fill in the following Email Additional information Po Snapshot Video clip m Subject the subject line of the email Additional information the content of the email m Snapshot Video Clip Choose to send a snapshot or video file 35 seconds in length 5 seconds before and 30 seconds after the trigger Files are sent as attachments FTP uploads snapshot or video clip to specified FTP location If this is chosen select either to
31. s Flickerless 60 Hz Max exposure time Auto wi DayNight mode auto Night threshold 220 0 255 Day mode Night mode Schedule for day mode OK Default Cancel Image Attribution All parameters under Image Attribution are values ranging from 0 to 100 Brightness Adjusts the brightness of the image drag the cursor to the right to brighten the image and vice versa Saturation Adjusts the saturation of the image drag the cursor to the right to decrease the saturation and vice versa Contrast Adjusts the contrast of the image drag the cursor to the right to decrease the contrast and vice versa Day amp Night Megapixel Network Camera js Logout Help admin 2010 03 13 16 45 20 General Video amp Audio Image Appearance Network Image Appearence Settings Y Video amp Audio Jl Image Adjustment Basic Settings gt lmage Appearance Video Streams Audio Backlight compensation on off PTZ Auto Gain Control on off Recording Event Notification System Sensor Configuration The Sensor Configuration tabs provide the following options Auto white balance turns on and off the auto white balance feature Backlight compensation turns on and off the backlight compensation feature Auto Gain Control turn on and off to adjust the auto gain control Advanced Settings The Advanced Settings allow you to make changes to the follo
32. send a snapshot or video file 35 seconds in length 5 seconds before and 30 seconds after the trigger Record Records video to the server CIFS setting or microSD card when triggered The Video clip stored on both remote storage server and local storage is a video file 35 seconds in length 5 seconds before and 30 seconds after the trigger Click OK to save or Cancel to abort the changes before you leave the page Trigger DO sends out DO when triggered Note Note When editing or deleting a rule that is being used but not being triggered the rule will not be in effect after edition deletion If the rule is being used and being triggered the changes will be applied after the action is over Surveon Network Camera User Manual 39 Surveon CAM4210 System microSD Card Management Surveon i Day amp Night Megapixel Network Camera mmm Live View Logout Help admin 2009 10 17 13 50 30 gt General System gt MicroSD Card Management Network Basic Settings Video amp Audio MicroSD card status ready Total size 1902M Free size 356M Used size 1546M PTZ Use 81 28 Recording Format microSD card gt Event Notification Password Format v System MicroSD Card Management gt MicroSD Card Management Available recording time System Status Recycle storage settings On off System Log S Enable automatic disk cleanup Max duration for 100 days Firmware Upgrade Re
33. set To Factory Default Exportimport amp Reboot Ok Cancel Basic Settings Basic Settings shows the status of the current microSD card Enter the administrator password and click Format to format the microSD card MicroSD Card Management MicroSD Card Management calculates how much time for recording Users may also set recycle storage settings here Setting Recycle storage settings to On will clear the microSD card once it is full You can also set the number of days which the system automatically clears the contents of the microSD card by setting the number of days in the Enable automatic disk cleanup Max duration for days section Maximum of 100 days locked files will not be cleared Surveon CAM4210 System Status This Section displays the status of the system including IP Address MAC address Subnet Mask Default Router microSD Card Capacity Status Boot Loader and Firmware versions S A Surveon Day amp Night Megapixel Network Camera Logout Help admin 2010 03 12 21 13 35 gt General System gt System Status Network System Status Video amp Audio IP 192 168 88 10 MAC address 00 D0 23 60 00 88 PTZ Subnet mask 255 255 255 0 Recording Default router 0 0 0 0 Event Notification microSD card capacity status 966MB M System i microSD Card Management Boot Loader Vi DA gt System Status Firmware version 1 1 401 System Log Firmware Upgrade Send system status to technical support
34. to 100 Sensitivity sets the sensitivity of Tampering Detection ranges from 0 to 100 When Tampering Detection is turned on associated settings can be changed under Event Settings For example if Record or Email is set for Tampering Detection the system will automatically record or email when tampering is detected Interval sets the Duration sets the Click OK to save or Cancel to abort the changes before you leave the page Surveon Surveon CAM4210 DI amp DO Surveon e Day amp Night Megapixel Network Camera Live View Logout Help admin 2009 10 15 15 59 21 gt General Event Notification gt DI amp DO Network DI amp DO Settings PTZ inputi Normal open i Normal open Trigger Recording Input Normal open d Normal open Trigger Output i l Event Notification T Event Server Motion Detection Tampering Detection _ Cancel gt DI amp DO Event Settings System The Back Panel of the Camera contains the following 1D0 Out Port 2DIIn Ports m 12V Power Port Ground DU DO is used as part of Event Triggering DO When motion event tampering is detected or when scheduled events occur DO can send out High or Low voltage to trigger external circuits connected DI Connects to external circuits and receives a High or Low voltage and signals the cameras of a DI input Surveon Network Camera User Manual Input 1 and Input 2 correspond t
35. ttings w X Surveon Day amp Night Megapixel Network Camera Live View Logout Help admin 2010 03 12 18 13 31 General Network Port Settings SC Network HTTP Port Settings Network Configuration HTTP port OU Note Port 8080 is reserved for liveview gt Port Settings UPnP RTSP Settings Video amp Audio Access name for stream 1 stream eq ep lp address stream1 SEN Access name for stream 2 stream2 eq tsp WIP address stream2 RTSP port 554 Note RTSP port must be a valid port number Recording RTP port for video 5500 Note RTP portfor video must be a valid port number Event Notification SEH RTCP port for video 5501 Note RTCP port for video must be a valid port number System Si S oats RTP port for audio 5602 Note RTP port for audio must be a valid port number RTCP port for audio 15503 Note RTCP port for audio must be a valid port number OK Cancel HTTP Port Settings The port number is used to access the camera RTSP Settings You may change the access name for stream 1 stream 2 the RTSP port number the RTP port for video the RTCP port for video RTP port for audio and RTCP port for audio Note The RTP port number must be an even number After entering the RTP port number the RTCP port number will automatically be set to the RTP port number 1 Click OK to save or Cancel to abort the changes before you leave the page Surveon Network Camera User Manual UPnP UPnP Se
36. ttings as shown in Figure 5 6 em Surveon Day amp Night Megapixel Network Camera Live View Logout Help admin 2009 12 18 10 36 25 SES Network gt UPnP Y Network UPnP Settings Network Configuration Enable UPnP Port Settings Friendly name Surveon CAM2200 gt UPnP gt Video amp Audio PTZ OK Cancel Recording L Event Notification System Check the Enable UPnP box and enter a correct friendly name and click OK Once activated neighboring computers can see the camera and allow direct connection when double clicked Click OK to save or Cancel to abort the changes before you leave the page Note If the computer does not support UPnP you can change the setting by going to Start gt Control Panel gt Add or Remove Programs In the Add or Remove Programs page select Add Remove Windows Components select Networking Services and click Details Select UPnP from the popup window Surveon Video amp Audio Settings Click on Settings on the top menu to access the Settings page click on Video amp Audio to access Video amp Audio Settings page This section includes Basic Settings Image Appearance Video Streams Overlay Image and Audio Basic Settings N S urveon Day amp Night Megapixel Network Camera Live View Logout Help admin 2009 12 18 10 37 48 gt General Video amp Audio Basic Settings gt gt Network Basic Settings Y Vide
37. ultaneous streams at H 264 MPEG 4 and MJ PEG 32K 10Mbps VBR CBR Motion detection tempering detection blocked redirected defocused or spray painted Omni directional 32KHz ADPCM 3 5mm phone jack 3 5mm phone jack 2 terminal block 1 terminal block 12VDC 400mA Video buffer Event action Supported protocols Ethernet Local storage RS 485 SDK Os Browser Software Temperature Humidity Power Power consumption Dimension Weight Certification 2 second pre alarm 30 second post alarm Send snapshot or video clip by FTP or email record to remote storage record to local storage trigger DO IPv4 ARP TCP UDP ICMP DHCP NTP DDNS SMTP FTP HTTP CIFS PPPoE UPnP RTP RTSP RTCP 3GPP 10 100 Base T RJ 45 microSD SDHC card slot x 1 Class 4 Class 6 only 1 2 pin on terminal block Surveon SDK 2 0 Microsoft Windows XP Vista 7 Microsoft IE 6 0 or above Surveon VMS 2 0 Operation 10 50 C 14 122 F Storage 30 70 C 22 158 F 20 95 12VDC PoE IEEE 802 3af with Class 3 Max 8 64W without AUX power 128 8 mm x 98 6 mm 5 07 x 3 88 Net 620g 1 37Ib Gross 1290g 2 85Ib Safety LVD EMC FCC CE Surveon Surveon CAM4210 System Structure S A o Du Speaker Microphone Smoke Alarm geg BZ Detector NAS FTP Email A NT Server i Router internet Remote Client1 Remote Client 2 Browser Browser 1 4 Network Camera
38. us users E Built in web server to allow real time remote surveillance and control using standard web browsers m Built in microSD card slot for local backup m Supports dynamic IP LAN and the Internet ADSL Cable modem m Supports most network protocols including HTTP TCP IP SMTP DDNS DNS DHCP FTP RTSP CIFS PPPoE m Supports 2 way audio m Automatically adapts image compression rate to available bandwidth m Provides Signal loss and motion detection alerts adjustable area and sensitivity level m Supports image recording and still image capture Image sensor Lens Viewing Angle Day Night IR LED Min illumination Iris control Shutter time Camera Angle Adjustment Video compression Resolution Video control Frame rate Video stream Bit rate Intelligent video Built in MIC Audio compression Audio input Audio output Alarm in Alarm out AUX Power Output 1 3 Network Camera Specifications CAM4210 1 3 1 3 megapixel progressive scan CMOS f 4 2 mm F1 8 Diagonal 89 Horizontal 71 Vertical 49 5 Dual band filter Yes 15 m 0 lux IR LEDs on N A 1 5 1 15 000 s Pan 0 340 Tilt 30 90 H 264 MPEG 4 MJ PEG Up to 1280x1024 Auto Gain Control Auto White Balance Auto Electronic Shutter Backlight Compensation Image adj ustment 15 fps at SXGA 1280 x 1024 15 fps at HD 20 1280 x 720 30 fps at VGA 640 x 480 30 fps at QVGA 320 x 240 2 sim
39. wing settings Flickerless Reduces flickering caused by the difference in frequency of the system and the environment lighting Options available in 50Hz 60 Hz and Auto Max exposure time Sets the maximum exposure time from 1 100s 1 50s 1 25s 1 12 5s and Auto Day Night Mode Settings including Auto Day mode Night mode and Schedule for day mode Under Auto mode Night gain threshold must be set with ranges from 0 to 255 The schedule mode requires a start and end time to be set Click OK to save or Cancel to abort the changes before you leave the page Surveon Network Camera User Manual 23 Video Streams Live View Logout Help admin 2009 10 15 11 05 44 Video amp Audio gt Video Streams General Network Video Stream1 Settings E Video amp Audio Video format MJPEG w Basic Settings video resolution VGA 640 x 480 v Image Appearance Video frames per second 25 v Xvideo Streams Key frame interval g0 v Audio Video quality settings Constant bit rate 1Mbps v PTZ Fixed quality Recording Event Notification Video Stream2 Settings System Normal Mode 3GPP Mode Video format Video resolution Video frames per second Key frame interval video quality settings Constant bit rate Fixed quality Ok Cancel Video format The compression format for the video options include H 264 MJ PEG MPEG4 Video Resolution Sets the resolution of
Download Pdf Manuals
Related Search