User`s Manual - EPS Bio Technology Corp.
Contents
1. eiiis cseceeise esee NEN AEA bote baeo Eaa adaa 42 Chapter 6 Technical Information ssssssssssseeeenenemenenennnen nnne et nri nanne nnen 44 Srreuiurde MM 44 Incl d 45 Device Information EE 47 Wamani EET C OGH M 48 Chapter 1 Understanding Your Meter The EasyMax Voice Blood Glucose Meter Display Shows results messages and results stored in memory Left Button Press to enter memory adjust setting and scroll through results Test Strip Slot Insert test strip here Battery Door Flip open the batter door by pushing the tab in the direction of the arrow and pulling the door up Right gt Button Press to turn the meter on confirm setting scroll through results 11 The EasyMax Voice Accessories Blood Glucose Test Strip Electrod Strip Insert DN Direction Hand Hold Area Confirmation Window Edge to Apply Sample Test Strip Bottle Expiration Date E EASYM yo 3 rest source of the glucose oxidosr s NE iw 29 59 mg dl ermal 101 136 mg d 5 302 410 SH 12 Installing Batteries 1 Open the battery door on the back of the meter by pushing the tab in the direction of the arrow and pullin2. Glucose System does not work for any reason other than obvious abuse EPS will replace it with a new system or an equivalent product free of charge P N 718035300 Rev A01 48
3. it out of the bottle The strip is for single use only Do not reuse it Record the date you open the test strip bottle Be sure to check the Expiration date on the test strip bottle The test strip is good for three months from the date the bottle is opened or until the expiration date on the bottle whichever comes first Store the test strip bottle and your meter in a cool dry place Store the test strips between 35 6 F 86 F 2 C 30 C Do not freeze Do not apply blood or control solution to the test strip until you insert it into the meter Do not touch the test strip with wet hands Do not bend cut or twist the test strips 16 Chapter 2 Control Solution Testing Why Run A Control Solution Test We recommend that you run the EasyMax Voice Normal control test because it lets you know that your meter and test strips are working properly to give you reliable results You should run the control solution test when W You use the EasyMax Voice Blood Glucose Meter for the first time You open a new bottle of test strips You think the meter or test strips may be working incorrectly You drop the meter You have repeated a test and the test results are still lower or higher than expected You are practicing the test procedure Note Professional users are instructed to follow federal state and local guidelines 17 About The Control Solution Use only with EasyMax Voice test strips Write the date you opened t
4. Do not prick your finger until your meter and strip are prepared 6 Set the lancing device aside until later in the test 26 Running A Blood Glucose Test With Blood From Your Fingertip 2 Put a test strip into the meter in the direction of the arrow The meter turns on automatically The icons and show themselves H 3 When the blood drop flashes on the display the meter will speak the instructions H 1 Wash your hands with soap and warm water Rinse and dry thoroughly 4 Using the lancing device Hold the lancing device firmly against the side of your finger Press the trigger button Then remove the lancing device from your finger 27 5 Gently squeeze and or massage P Touch the blood drop at the tip 7 The meter starts to count your fingertip until a round drop of the transparent window of down from 5 seconds and the test strip D t put blood of blood forms on your fingertip anon or mu BID Bo sie to will speak the results get enough blood in the strip s 8 Remove the test strip and confirmation window the meter turns off Otherwise an inaccurate automatically reading may result 28 Alternate Site Testing AST Understanding Alternate Site Testing What is AST What is the advantage of AST Besides the fingertip you can test the forearm You have the option of testing other places on your body besides the fingertip Consult your health care professional before you begin using the forea
5. EasyMax Voice Self Monitoring Blood Glucose System User s Manual Please read this User s Manual thoroughly before using your blood glucose meter Dear EasyMax Voice SMBG System Owner Thank you for using the EasyMax Voice Self Monitoring Blood Glucose SMBG System We designed this system to be dependable easy to use compact lightweight and portable to help you monitor your blood glucose on a regular basis Please read this manual thoroughly before you begin testing This manual provides you and your diabetes care team with important information and step by step direction to use the EasyMax Voice Self Monitoring Blood Glucose System Thanks again for choosing the EasyMax Voice SMBG System Intended Use The EasyMax Voice Self Monitoring Blood Glucose Test System is intended for the quantitative measurement of glucose in fresh capillary whole blood samples drawn from the fingertips or forearm Testing is done outside the body n Vitro diagnostic use It is indicated for use at home over the counter OTC by persons with diabetes or in clinical settings by healthcare professionals as an aid to monitor the effectiveness of diabetes control Standard Accessories Your new EasyMax Voice Blood Glucose meter and accessories work together to measure the amount of glucose in your blood The system includes Blood Glucose Meter Carrying Case User s Manual Log Book e 2 1 5V AAA alkaline batteries Why is it so impor
6. an and store it in a safe place Protect the meter from direct sunlight to ensure a longer lifespan You should not store the meter and test strips in a car a bathroom or a refrigerator Keep the meter test strips and lancing device away from children and pets You should not test critically ill patients with home use blood glucose meters Elevated levels of acetaminophen uric acid gentisica acid levodopa dopamine ascorbic acid and methyldopa may affect results Incorrect results may occur when performing the test If you believe you are not feeling well please contact your healthcare professional Remove batteries if the meter will not be used for one month or more Warning for potential biohazard Healthcare professionals using this system on multiple patients should be aware that all products or objects that come in contact with human blood even after cleaning should be handled as if capable of transmitting viral disease Consult with your healthcare professional before testing on your forearm Do not touch the strips with wet hands Do not use expired strips the expiration date is shown on the bottle Do not bend cut or twist the strips Altitude up to 10 000 feet above sea level has no effect on readings Health Related Information m If you are very dehydrated urinating frequently low blood pressure shock or hyperosmolar hyperglycemic nonketotic coma HHNKC you may get a test result that is lower than what your bl
7. d Glucose Being aware of the symptoms of high or low blood glucose can help you understand your test results and decide what to do if they seem unusual Here are the most common symptoms Greater than 240 mg dL Below 60 mg dL What It Means What It Means The test result is higher than reference normal The test result is lower than reference normal range 70 110mg dL range 70 110mg dL Symptoms Symptoms Fatigue increased appetite or thirst frequent Sweating trembling blurred vision rapid urination blurred vision headache general heartbeat tingling or numbness around mouth aching or vomiting or fingertips What to Do What to Do H f you are experiencing any of these m f you are experiencing any of these symptoms test your blood glucose symptoms test your blood glucose m Ifthe result displayed is greater than 240 m Ifthe result displayed is below 60 mg dL mg dL and you have symptoms of high and you have symptoms of low blood blood glucose contact your healthcare glucose contact your healthcare professional immediately professional immediately m Ifthe result does not match how you feel H Ifthe result does not match how you feel follow the steps under Unusual Test follow the steps under Unusual Test Results Results 34 Comparing Your Meter Result To A Lab Result A common question is how the blood glucose results on your meter compare to the lab results Your blood glucose can change quickly especiall
8. e humidity may affect the results A relative humidity greater than 90 may cause incorrect results The system should be used at a temperature between 50 F 104 F 10 C 40 C Outside this range the System may get incorrect results DO NOT reuse the test strips The test strips are for single use only Hematocrit The hematocrits between 30 and 55 will not significantly affect the results Hematocrit below 30 may cause higher results Hematocrit above 55 may cause lower results If you do not know your hematocrit level please consult with your healthcare professional Altitude up to 10000 feet above sea level has no effect on readings Healthcare Professionals Please note these additional Limitations 7 8 Patients undergoing oxygen therapy may have inaccurate results If the patient has the following conditions the result may fail Severe dehydration Severe hypotension low blood pressure Shock Astate of hypoglycemic hyperosmolar state with or without ketosis Lipemic samples Cholesterol level up to 500 mg dL and triglycerides up to 3 000 mg dL do not affect the results Grossly lipemic patient samples have not been tested and are not recommended for testing with EasyMax Voice Glucose Meter 45 10 Critically ill patients should not be tested with home use blood glucose meters 11 Interfering Substances depend on the concentration The chart below shows substances and the test concentration amount tha
9. e the batteries first If Err appears again please call Customer Service toll free 866 994 3345 Test result is higher than 600 mg dL Action Test again If the result is still the same try a control solution test and if the control solution test falls within the correct range please contact your healthcare professional The test result is lower than 20 mg dL Action Test again If the result is still the same try a control solution test and if the control solution test falls within the correct range please contact your healthcare professional 43 Chapter 6 Technical Information Specifications Brand name EasyMax Voice Blood Glucose Meter Range 20 600 mg dL Test time 5 seconds Memory sets 480 test results Temp 50 F 104 F 10 C 40 C Operating condition Relative Humidity R H lt 90 Blood sample 0 6 uL Fresh blood from fingertip or forearm Hematocrit Hct 30 55 Power 2 Alkaline 1 5V AAA Battery life Over 2000 tests Display dimension 1 57 x 1 30 40 0 x 33 0 mm Device dimension H x W x D mm 3 6 x 2 1 x 0 8 92 9 x 54 x 21 65 mm Weight 1 48 oz 42 04 grams w o batteries Principles Electrochemical biosensor technology 44 Limitations The test strips are used for fresh capillary whole blood samples 1 o BR 6 DO NOT use neonate blood sample Extrem
10. g the door up 2 Insert two batteries You will hear opening music 3 Put the battery door back in place and snap it closed 13 Setting The Time and Date Setting the current time and date in your meter is important if you intend to use the meter memory or if you want to download your results to a computer 1 Press Right Button to turn 2 The last 2 digits of the year 3 Repeat step 2 to set the the meter on The meter will flashes at the top of the date and time The flashing greet you 15 display Press Left Button field is the one you are to adjust the year and press currently setting Right Button to confirm the A AM P PM setting 14 Setting The Language and Volume First Time Use m 1 Press Left Button to 2 And press Right Button 3 Press Left Button to adjust the language to confirm the setting J gt adjust the volume and En English Es Spanish press 9 Right Button to confirm the setting H Note The unit of Blood Glucose Meter is set at mg dL without any modification function 15 Using EasyMax Voice Blood Glucose Test Strip Use only with EasyMax Voice Blood Glucose Meter Run a control solution test every time you open a new box of test strips See Chapter 2 Control Solution Testing Keep the test strips in their original bottle After you take a test strip out immediately close the bottle tightly Use the test strip within three minutes after you take
11. he bottle on the bottle label The control solution is good for three months from the date the bottle is opened or until the expiration date on the bottle whichever comes first Do not use a control solution that is past the expiration date The control solution can stain clothing If you spill it wash your clothes with soap and water Close the bottle tightly after every use Left over control solution should not be added back into the control bottle Store the bottle of control solution at room temperature between 35 6 F 86 F 2 C 30 C Do not freeze 18 Running A Control Solution Test You need the meter a test strip and a vial of control solution 1 Put a test strip into the meter in 2 The meter turns on the direction of the arrow on the automatically and the icons test strip of amp and e show themselves o 3 Place the meter on a flat surface like a table 4 Remove the control solution bottle cap and wipe the tip of the bottle with a tissue 5 Squeeze the bottle until a tiny drop forms at the tip of the bottle 19 Control Solution Test Continued 6 Touch the drop of Control 8 Do not remove the test strip 9 Remove the test strip and Solution to the tip of the test yet Check if the reading throw it away after you have strip falls within the range printed compared the reading to the Te Themeter starts to countdown on the test strip bottle range printed on the test from 5 seconds and then st
12. he time and date in Chapter 1 Once 480 results are in memory adding a new result causes the oldest one to be deleted Control Solution values will be included in the memory and averages Refer to the section Viewing amp Deleting Test Results to delete the control solution values before averaging your test results 36 Viewing amp Deleting Test Results 3 Press the Left Button to 4 To delete a test result press 1 Press 5 Right Button until view the last test result Left Button for more than 3 seconds and display shows e J turning the meter on JEL 2 Press Left Button to view 5 Press Left Button to keep averages for 7 14 30 60 90 reviewing the results days 6 Press Right Button to go Note Press gt for 3 seconds to turn off the meter or the meter back to averages for turns off automatically in 90 seconds 7 14 30 60 90 days 37 Meter Setup Using The Set Mode By using the set mode you can personalize your meter to suit your needs Here are the features you can customize Time and Date to set the time and date see Chapter 1 Language to set the language see Chapter 1 Volume to set the volume see Chapter 1 38 Chapter 5 Maintenance and Troubleshooting Installing Batteries The meter uses two alkaline 1 5V AAA batteries Batteries will normally last for more than 2000 tests Other types of 1 5V AAA batteries are also acceptable but the capacity of te
13. ntrol Solution Test Results ssssesseeeee en ener nee 21 Chapter 3 Testing Your Blood Glucose nennen nennen innen enne 23 Using The Lancing DEVICE m 23 Inserting A Lancet into the Lancing Device oe eee eee ee eee eee ennee ee eee senna eeeeaeeeeeeaeeseneeeeniaeeesenaeeeeneeeeeaa 24 Running A Blood Glucose Test With Blood From Your Fingertip see 27 P rzmzu mu M cie cT 29 Running A Blood Glucose Test With Blood From Your Forearm sese 31 Discarding E Ee 32 Understanding Your Test RESUS soinaren laas bd enata isisi riii 33 Unusual Test EE 33 Symptoms of High or Low Blood Glucose eene eene nennen nnn enne nanan anaana 34 Comparing Your Meter Result To A Lab Result sssssssseeeeen emen nennen 35 Chapter 4 Meter Memory Setup sssssssssssseeeneenneeen eene nennen nere snnnr inneren innen nennen 36 Memory Storing Test Results E 36 Viewing amp Deleting Test Results cere eae rene tr eine dete EE EANTA EEEE Dee ka Denis 37 Meter Setup uci toe Cn rer ape eee oe bids cautus seen iu ade bul dE cR aa rer Qu tact dere Dons eh dee xa true errr 38 Chapter 5 Maintenance And Troubleshooting eee emen 39 linStelling Batterie ce S 39 Cleaning Your Meter isc ccciceth etter eset eile een et ei a ete 40 Maintenance And TeStin EE 41 Screen Messages And Troubleshooting
14. ood glucose really is If you think you are dehydrated call your doctor right away m If you have followed the steps in the user s manual but still have symptoms that don t seem to match your test results or if you have questions please talk to your doctor m Please read your test strip instructions carefully for additional health related information Warning for potential biohazard Healthcare professionals using this system on multiple patients should handle all products or objects in contact with human blood carefully to avoid transmitting viral disease even after cleaning Explanation of Symbols Left button Right button Date un Memory Time A Insert a test strip Result amount CH Upload data English P Battery Espa ol ul Volume Apply blood i Temperature ERROR D voice Table of Contents Chapter 1 Understanding Your Meter 11 The EasyMax Voice Blood Glucose Meier 11 Installing Batteries EE 13 Setting The Time And Date esie niente ee itecto rbi kt e Ee eer E LEE DR sk eL e iE uvae caes 14 Setting The Language And Volume 15 Using EasyMax Voice Blood Glucose Test Grip 16 Chapter 2 Control Solution Test 17 Why Run a Control Solution Test acere trt ectetur tiet ts ed studs e Uo cua date conve Fuse de ane 17 About The Control SOlUMNONS Emm 18 Ruaning A Control Solution Test eden Litt esis ei eg bee FR pe Ha an eee ee 19 Understanding Co
15. ored strips or control solutions Read Chapter 2 Control Solution Testing and test again Stop using the meter if you continue to obtain the inaccurate results Call Consumer Services Toll Free 866 994 3345 Eastern Time Mon Fri 9 00AM 9 00PM During non service hours please contact your healthcare provider 22 Chapter 3 Testing Your Blood Glucose Using The Lancing Device E The best depth setting is the lowest number that draws enough blood for a test Try different settings to find the one that s right for you E Please do not share your lancing device with anyone And always use a new sterile lancet Lancets are for one time use only Note Used test strips and lancets are considered bio hazardous waste in accordance with local regulations and should be handled as if capable of transmitting infection You may discuss methods for disposing of used test strips and lancets with your doctor 23 Inserting A Lancet Into The Lancing Device You must first load the lancet into the lancing device to get it ready for use 1 Unscrew the Cap 2 Insert the lancet into the lancing device firmly then twist off the protective cover 24 3 Recap the front cap Note Select 1 2 for soft or thin skin 3 for average 4 Select the desired penetration depth 4 5 for thick or calloused skin 25 5 Pull on the sliding barrel of the lancing device until it clicks and then release Now the lancing device is ready
16. ove the adjustable cap Without touching the used lancet stick the lancet tip into its protective cover Grip the lancet carrier firmly and pull the lancet safely out 2 Discard the used disposable lancet into an appropriate sharps or biohazard container 32 Understanding Your Test Results The EasyMax Voice Blood Glucose test strips are plasma referenced and calibrated for easier comparison to lab results The normal fasting blood glucose range for an adult without diabetes is 70 110 mg dL Two hours after meals the blood glucose range for an adult without diabetes is less than 120 mg dL For people with diabetes please consult your doctor for the blood glucose range appropriate for you Unusual Test Results If your test result doesn t match the way you feel please follow these steps 1 Run a control solution test Chapter 2 Control Solution Testing 2 Repeat a blood glucose test Chapter 3 Testing Your Blood glucose 3 If your test results still don t reflect the way you feel call your doctor immediately Note 1 Extremely high humidity may affect the test results A relative humidity greater than 90 may cause inaccurate results 2 Ared blood cell count Hematocrit that is either very high above 5596 or very low below 30926 may not provide accurate results 3 Some studies have shown that electromagnetic fields may affect results Do not test near an operating microwave oven 33 Symptoms Of High Or Low Bloo
17. r no maintenance with normal use It e Q un HHH automatically tests its own systems every time you turn it on and lets you know if something is wrong See Screen Messages and what to do N I ri X X about them J To make sure the display is working properly turn off the meter Press and N hold Right Button to see the complete display All the indicators should be clear and look exactly like the picture to the left If not call the Customer Service Center toll free 866 994 3345 Eastern Time Mon Fri 9 00AM 9 00PM During non service hours please contact your indi gin P a A hil healthcare provider Cleaning Your Lancing Device W To clean the lancing device wipe with a soft cloth dampened with water and mild detergent DO NOT place the entire device under water W To disinfect the cap after cleaning place it in 7096 7596 rubbing alcohol for 10 minutes at least once a week Allow the cap to air dry after disinfecting 41 Screen Messages And Troubleshooting Never make treatment decisions based on an error message If you have any concerns please call the 8007 on back of meter or your current dealer 0349 tthe r u Humidified Used strips Low power System fault Action Replace with a new Action Replace with new Action Replace the batteries first strip LED batteries If ERROR 001 appears again please call Customer Service toll free 866 994 3345 42 System fault Action Replac
18. rip bottle shows the result 20 Understanding Control Solution Test Results The label on your test strip bottle shows the acceptable ranges for the Control Solutions The result you get should be inside this range Make sure you compare the result to the correct level of control When the control solution result is inside the range on the test strip bottle your test strips and your meter are working properly Note Control Solution values will be included in the memory and averages Refer to the section Viewing amp Deleting Test Results to delete the control solution values before averaging your test results 21 If your control solution result is not inside the acceptable range printed on your test strip bottle here are some things you can do to solve the problem Troubleshooting Checks v Was the test strip exposed to open air for a long period of time v Was the test strip bottle capped tightly v Was the meter functioning well Y Is the control solution expired or contaminated v Were test strips and control solutions stored in cool dry places Y Did you follow the testing steps properly Action Repeat the control test with properly stored strips This will humidify strips inside Replace the test strips You can use control solution to verify the meter s functions Chapter 2 Replace with new control solution to check the performance of SMBG system Repeat the control test with properly st
19. rm for testing Blood glucose test results obtained from your forearm may differ significantly from fingertip samples We strongly recommend that you USE AST only in the following intervals In a pre meal or fasting state more than 2 hours since the last meal Two hours or more after taking insulin Two hours or more after exercise Do NOT use AST if You think your blood glucose is low You are unaware of hypoglycemia Your AST results do not match the way you feel You are testing for hyperglycemia Your routine glucose results are often fluctuating If you are pregnant 29 Fingertip test only If sick If blood glucose is low After exercising Two hours or less after eating When you have just taken insulin When basal insulin is most active If the blood glucose test result does not match how you feel do a fingertip test to confirm the result again E If you often do not notice when your blood glucose is low do a fingertip test 30 Running A Blood Glucose Test With Blood From Your Forearm Please use the clear cap with the lancing device for Alternate Site Testing 1 Massage the puncture area 2 Press and hold the device 3 Press the trigger button to of forearm for a few with clear adjustable tip activate the lancing device seconds against the forearm Hold the device against forearm and increase pressure until the blood sample size is sufficient 31 Discarding Used Lancets 1 Unscrew and rem
20. st times may differ Install the batteries when you first use the meter or replace with new batteries when the LP low power message and the low battery symbol appear on the display The meter will not turn on the first time batteries are installed Please press and hold Right Button or insert the test strip to turn your meter on The meter will turn off automatically Or you can press and hold gt Right Button to turn your meter off Low battery symbol Note 1 The meter will not delete earlier records after you replace batteries 2 You should reset the time and date again after you replace the batteries 3 1 5V AAA x 2 batteries are available at most stores You may take the old batteries with you for replacement 4 Remove batteries when you will not be using the meter for one month or more 39 Cleaning Your Meter Caring for your EasyMax Voice SMBG system does not require special cleaning Please keep the meter free of dirt dust bloodstain and water stains Follow these guidelines carefully to help you get the best performance possible Do Do Not B Make sure the meter is turned off B Get any moisture in the test strip slot B Gently wipe the meter s surface with a soft BI Spray any cleaning solution directly onto cloth slightly dampened the meter E Put the meter under water or liquid Pour liquid into the meter 40 Maintenance And Testing HB HH BB HH Your meter needs little o
21. t will not affect the blood glucose results Interfering E Bias at 50 5 Bias at 250 5 Bias at 50025 Substance mg dL mg dL mg dL mg dL Acetaminophen 8 10 2 6 5 3 8 Ascorbic Acid 2 5 11 8 6 8 5 3 Dopamine 2 4 3 12 9 6 3 Gentisic Acid 6 7 8 2 8 4 3 L Dopa 2 3 8 1 2 1 8 Methyldopa 2 5 2 2 3 4 1 Uric Acid 13 7 6 3 9 3 8 46 Device Information EasyMax Voice SMBG System EasyMax Voice Blood Glucose Test Strips EasyMax Voice Blood Glucose Meter EasyMax Voice Normal Control Solution EasyMax Voice High Control Solution Reference American Diabetes Association Standards of Medical Care for Patients with Diabetes Mellitus Diabetes Care 25 2002 p 537 Manufacturer 2F No 49 2 Lane 2 Guang Fu Rd Sec 2 Hsinchu City Taiwan Lancing Device Meets the requirements of MDD 93 42 EEC Manufacturer Suzhou SPR Medical Devices Development CO Ltd No 32 Xinlian RD Pingjiang Suzhou P R China 215031 TEL 0086 512 67217661 FAX 0086 512 67217663 E mail guopings xinda medical com 47 Lancet Meets the requirements of MDD 93 42 EEC Manufacturer SAE HAN MEDICAL CORP 700 113 PUB GOT DONG IL SAN GU GOYANG CITY KYUNGGI DO KOREA TEL 82 31 923 4330 FAX 82 31 923 4331 E mail saehan saehanmed com Warranty EPS warrants the original purchaser for a period of 5 years from the date of purchase This means during the warranty period if your Self Monitoring Blood
22. tant to test blood glucose regularly Testing your blood glucose regularly can make a big difference in how you manage your diabetes every day We ve made this SMBG system as simple as possible to help you to use the meter regularly Your meter is easy to use and you can adjust the lancing device for your comfort Do you need Help If you have questions or need assistance please call the Customer Care Service toll free at 866 994 3345 Eastern Time Mon Fri 9 00AM 9 00PM During non service hours please contact your healthcare provider Note Although the EasyMax Voice SMBG System is easy to use you may need to consult your healthcare professional this may be your doctor pharmacist or diabetes nurse educator for instructions on how to use the system Only the correct use of the system will ensure accurate results Important Information About Your New Meter EasyMax Voice blood glucose meter is designed and approved for testing fresh capillary blood from fingertip forearm The meter is for outside the body in vitro use It should not be used to diagnose diabetes Only use EasyMax Voice blood glucose meter with EasyMax Voice Blood Glucose Test Strips Other test strips will give inaccurate results Testing is not valid for neonatal blood specimen Do not disassemble the meter as this may cause damage to the components resulting in incorrect reading Disassembling the meter will also void the warranty Always keep the meter cle
23. y after eating taking medication or exercising If you test yourself in the morning then go to the doctor s office for a blood glucose test The results will probably not match even if you are fasting This is typically not a problem with your meter it just means that time has elapsed and your blood glucose has changed If you want to compare your meter result to the lab result you must be fasting Bring your meter to the doctor s office and test yourself by fingertip within five minutes of having blood drawn from your arm by a healthcare professional Keep in mind that the lab could use different technology than EasyMax Voice blood glucose meter and that blood glucose meters for self testing generally read somewhat lower or higher than the lab result For accuracy and precision data and for important information on limitations see the instructions that come with your test strips 35 Chapter 4 Meter Memory Setup Memory Storing Test Results Your meter stores a maximum of 480 test results with the time and date of the test You can review them at any time When the memory is full the oldest result is dropped as the newest is added so it is very important to have the correct time and date set in the meter Note 1 2 2 Do not change your therapy based on one individual result in memory The memory is not lost when you replace the battery You do need to check that the time and date are still correct See Section Setting t
Download Pdf Manuals
Related Search