1.Operating elements and connections
Contents
1. 1511 15 1 Color TFT LCD Monitor Metal Housing User s Manual Version 3 02. 1 Auto Key Automatically adjusts H Position V Position Pixel Clock 1 DC 12 Volt Power Input 2 PC Input and Phase for an optimal image 3 S Video input 4 AV Composite Video input 2 Up Key To increase the value of the chosen item 3 LED Power Indicator Green is On Red is standby 4 Power Key Power ON OFF 2 Connections 5 Down Key To decrease the value of the chosen item 1 Connect the video source to the Video input Connector 3 for S Video or 6 Menu Key To enter the main menu of the on screen display Connector 4 for AV Composite Video Input or Connector 4 for PC Input Main power on off 2 Connect the Regulated 12V power supply to Connector 1 The positive pole must be connected to the center contact 5 Trouble Shooting 3 Operation i If power LED is off check if the power cable is securely connected 1 The above in connections above must be carried out first ii If power LED is RED in color check if the video cable is securely 2 Switch on Main power button to turn on the power The green LED will light connected and you have a video signal Also check if using PC 3 Select the correct Video Input input that your computer is switched on 4 Use OSD controls to adjust the Brightness and Contrast in order to obtain an iii If power LED is GREEN in color check if the H SYNC frequency image as clear and sharp as possible is out of range Adjust the brightness and contrast control Page 3 of 6 Page 4 of 6 LM
3. USAGE NOTICE Please follow all warnings precautions and maintenance as recommended in this user s manual to maximize the life of your LCD Monitor To avoid any damage to the LCD Monitor and risk of electronic shock do not spill any water or other fluids into the Monitor If this happens turn off the power unplug the power cord and send the Monitor to your local dealer or our service department as soon as possible Use a Regulated power supply with the specification of DC 12 Volt with centre pin Positive Do not use any other power supplies as you can damage the unit Do not place objects on or suspend them with the power cord This could damage the power cord and unit Do not twist the power cord unnecessary And do not place it close to any heated objects Do not try to repair the power cord when it is damaged or broken but replace it with a new one immediately Avoid any metal objects or inflammable items dropping into the Monitors ventilation slots Do not attempt to open or disassemble the Monitor yourself as this may cause an electric shock It will also invalidate the warranty Do not use this monitor in any areas that are susceptible to excessive dust dirt and humidity Do not set the monitor up in direct sunlight extremely hot or cold environments Do not expose the LCD monitor to rain or moisture Page of 6 SPECIFICATION Screen Size 15 1 Diagonal Re
4. solution SXGA 1024 x 768 Number of Colors 16 2M Colours Pixel Pitch and Format 0 297 x 0 297 mm Brightness 250 cd m Contrast Ratio 700 1 Operating Temp SC 35 C Storage Temp 5 C 60 C Backlight CCFL Viewing Angle R L 60 deg U D 45 deg Power Consumption 1 25A DC 12V Video Input level 1 0Vpp 0 5Vpp S video Video Impedance 750 PC Input 15 pin D sub Page 6 of 6 Package 4 Installation This Monitor comes with all the items listed below The unit in a metal case is suitable for mounting into furniture walls etc Insert four screws into the mounting holes at the front panel and mount the Check to make sure your unit is complete If not report the missing items to your device to desired location dealer immediately Front View Fig 1 Monitor Unit x 1 Power adaptor x RCA Video Cable x 1 S Video Cable x 1 15 pin D Sub Cable x 1 APHIS Application range The LCD color monitors active matrix technology offers a sharp and high contrast display It can be universally used for Surveillance systems In Rear View Inputs Fig 2 Vehicle Reverse monitoring systems or for Multimedia applications The additional Audio input enables sound reception via Headphones Audio l Jack Power po Video AY RCA L Audio Jack Optional XGA Optional RCA R Audio Jack Optional Page 2 of 6 Page 5 of 6 1 Inputs and Connectors on the LCD monitor 4 OSD Control Key
Download Pdf Manuals
Related Search