Culer XC3000 Evaporative Cooler User Manual
Contents
1. WARNING IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONDUCTOR CAN RESULT IN A RISK OF ELECTRICAL SHOCK CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE PERSON IF YOU ARE IN DOUBT AS TO WHETHER THE OUTLET IS PROPERLY GROUNDED DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT IF IT WILL NOT FIT THE OUTLET HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN DO NOT USE A THREE PRONG TO TWO PRONG ADAPTER IMPROPER CONNECTION MAY CREATE A RISK FOR ELECTRICAL SHOCK 10 11 12 19 14 15 16 17 18 19 20 21 To protect against electrical shock do not immerse unit plug or cord in water or spray with liquids Keep the power cord away from heated surfaces Do not leave the product unattended when it is plugged in Turn off the product before unplugging Do not operate the product with a damaged power cord plug or if the product is damaged in any manner Call an authorized customer service center for evaluation adjustment or repair Do not run cord under carpets Do not cover cord with throw rugs runners or similar coverings Do not route cord under furniture or appliances Place power cord away from traffic area where it will not be tripped over Do not insert or allow any foreign objects to enter the intake or exhaust air openings as it may cause mechanical electrical or fire damage to the product Do not block or tamper with the cooling nozzles as it may reduce or impede the functionality or performan2. amp 30 Professional Cooling Unit C U L p Model Number XC3000 od Owner s Manual READ AND SAVE THESE INSTRUCTIONS CAUTION Before using this product read this manual and follow all safety rules and operating instructions Failure to comply with instructions could result in personal injury and or property damage IMPORTANT For replacement parts or operating questions go to www culer com or call 1 800 320 6478 R E Williams Contractor Inc www rewci com Table of Contents SECTION PAGE T Safety INPORMAUION chic ia eana aaa E E a EE a a 2 2x Canon COMENS mrn E ET ee eee eee ene E A 3 3 General Assembly INSthuGtOnS aein a aaa a a T N A 4 A OPSTATON iOS UC HONS eae a a a a a O 4 Sa UMOINIEN ANCE rs eeno r O a ae eats 5 O SOO aS i a N E E E Arc daustasautaenceee ceases 6 L FouDesho OUNCE iuen a E A A E T O POREO der EI araa E T 9 Warranty seasea a aa a E E eaeasesseie 8 Safety Warnings READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS SAVE THIS MANUAL FOR FUTURE REFERENCE READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE Read and understand this instruction manual and all labels on the Cooling Unit before using Safety is a combination of common sense staying alert and knowing how this product works Use the product only as described in this manual To reduce the risk of personal injury or damage to the Cooling Unit use only recommended accessories Understanding Safety Terminology DANGER If safety
3. CALS TO CLEAN THE PRODUCT THEY WILL DAMAGE THE PRODUCT e Empty all water from the water tank e Clean the unit with a soft cloth and mild soap solution e Dry all parts completely e Store the product in a clean and dry place EMPTYING WATER TANK e Unplug the product from the power supply e Position the product in a location where water can drain out e Unscrew the drain plug e Allow all water to drain from the tank e Replace the drain plug and tighten CONDITIONING WATER TANK Conditioning the water tank ensures that the cooling system will operate at optimal levels throughout the life of the system If the product produces musty smelling cooling e Completely drain water tank See Emptying Water Tank e Add drops of unscented chlorine bleach to about 2 gallons of CLEAN WATER approximately 5 drops per gallon of water and pour into water tank e Run the cooling system e The system is conditioned and ready for operation R E Williams Contractor Inc wWww rewci com 6 Troubleshooting PROBLEM CAUSE CORRECTION Fan not running Power cord is not connected Connect power cord Unit not cooling Water streaming from nozzle Mist is not balanced among nozzles Fan switch in the OFF position Product GFCI has tripped Outlet GFCI has tripped Fan switch in the OFF position Cooling switch in OFF position Water tank is empty Clogged water filter Air flow is low Air filter needs replacement Fo
4. ce of the product Call an authorized customer service center for evaluation adjustment or repair Never place the product where it may fall into a water reservoir example pool or body of water or anything containing an electrically conductive substance This product must be grounded If it should malfunction or break down grounding provides a path of least resistance for electric current to reduce the risk of electric shock Plug into an appropriate ground fault circuit interrupter GFCI protected outlet that is properly installed and in accordance with all local codes and ordinances Do not hang or mount the product on a wall or ceiling Grasp plug and remove from the receptacle or other outlet device Do not unplug by pulling on power cord Risk of fire Do not replace the provided power supply device Only use certified power supply rated for this product Discard product if the attachment plug is damaged Carton Contents Pack List QTY 1 Industrial Cooling Unit 1 2 Owner s Manual 1 R E Williams Contractor Inc www rewci com General Assembly Instructions NO ASSEMBLY REQUIRED 1 Fill your new Industrial Cooling Unit with clean water 2 Connect the unit s power cord to a 120V 60Hz rated outlet 3 You are now ready to go Operating Instructions IMPORTANT BEFORE STARTING Read this owner s manual in full before operating this product This product is designed to operate with clean water Place the pro
5. duct on level ground Keep children away from the product Do not insert anything into the fan guards If moving the product to a different location turn it OFF and unplug it from the outlet Clean and clear any dirt or dust from the fan to prevent water contamination Testing the GFCI 1 Connect the power cord to a 120V 60Hz rated outlet fig 7 The indicator light on the GFCI will light up 2 Turn the fan on by pressing the fan switch to the ON position fig 2 3 Press the TEST button on the GFCI The indicator light will go out and the unit will stop working 4 Press the RESET button on the GFCI The indicator light will turn on and the unit will power on Fan ON 1 Press the fan switch to the ON position fig 2 Fan OFF 1 Press the fan switch to the OFF position fig 3 R E Williams Contractor Inc www rewci com 4 Cooling ON 1 Ensure the drain plug is in place and tightened fig 4 2 Open and fill water tank with clean water then replace water cap fig 5 3 Press the fan switch to the ON position fig 2 Allow the fan to run for 30 seconds 4 Turn on the cooling function by pressing the cooling switch to the ON position fig 6 Cooling OFF 1 The cooling function can be turned off independently from the fan by pressing the cooling switch to the OFF position fig 7 2 Pressing the fan switch to the OFF position will turn off all functions fig 3 Note Unit will continue to atomize for a short t
6. es for only 90 days if this product is ever used for commercial or rental purposes The serial number model number and manufacturing date code can be found on the label attached to the unit You should record these numbers and the date of purchase and keep in a safe place for future reference MODEL NUMBER XC3000 MFG DATE CODE SERIAL NUMBER DATE OF PURCHASE CUSTOMER SERVICE NUMBER 1 800 320 6478 WEBSITE www culer com R E Williams Contractor Inc www rewcli com
7. ime while the unit depressurizes Maintenance CUSTOMER RESPONSIBILITIES Read and follow the maintenance schedule and the maintenance procedures listed in this section WARNING ALWAYS UNPLUG THE POWER CORD BEFORE MOVING OR SERVICING THE PRODUCT DO NOT IMMERSE THE PRODUCT IN WATER REPLACING WATER FILTER WARNING ANY SERVICING OF THIS UNIT EXCEPT FOR GENERAL MAINTENANCE DESCRIBED IN THIS SECTION SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE CAUTION The filter has been designed to provide optimal system performance by catching any debris that may enter the supply lines throughout use Semiannual replacement of the water filter ensures the life of your system R E Williams Contractor Inc www rewci com 5 Locate the water filter under the undercarriage of the product fig 8 2 The filter is connected to the water tank via a push in connector for ease of service Push the connector ring and pull out the water filter hose from the push in connector 3 The filter is connected to the water pump via a hose barb connector Pull the water filter hose from the hose barb connector 4 Dispose of old filter Always dispose of waste according to local law 5 Push the hose into the push in connector to connect the filter to the water tank 6 Push the hose onto the hose barb connector to connect the filter to the water pump CAUTION DO NOT USE GASOLINE THINNER ALCOHOL SOLVENTS OR OTHER HARSH CLEANNERS OR CHEMI
8. information is not followed someone will be seriously injured or killed WARNING If safety information is not followed someone could be seriously injured or killed CAUTION If safety information is not followed someone may be injured When using this product follow basic safety precautions including the following WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR INJURY Make sure that the power source complies with the electrical requirements of the product Do not store outdoors See storage section Do not use this product with a damaged or missing filter To reduce the risk of personal injury the product should not be placed where children can reach it hae ee IS ee Use this product only as described in this manual Any other use may cause electrical shock fire and injury to people or animals R E Williams Contractor Inc wWww rewci com WARNING DO NOT USE THE ON OFF BUTTONS AS A MEANS OF DISCONNECTING POWER WHEN SERVICING THIS PRODUCT ALWAYS DISCONNECT THE POWER CORD 6 T Disconnect the power cord before moving or performing any maintenance on the product This product shall not be used in potentially dangerous conditions such as flammable explosive or chemically loaded atmospheres Do not use or store near hazardous materials If the product is not working correctly has missing parts has been dropped damaged or dropped in water call an authorized service center for evaluation adjustment or repair
9. reign object in nozzle Low water flow Foreign object in nozzle Air or water hose leaks Turn the fan switch to the ON position Press RESET on the products GFCI Reset the outlet s GFCI Turn the fan switch to the ON position Turn the cooling switch to ON position Fill tank with clean water Order and replace water filter Run just the fan for 30 seconds then turn cooling switch to ON position Order and replace air filter Order and replace nozzle Order and replace water filter Order and replace nozzle Contact customer service Parts Reorder List No Panno Descnpton arv AM15PMMR 1 002 Water Filter 2 XC3000 1 053 Drain Plug R E Williams Contractor Inc www rewci com This product is warranted for one year from the date of purchase against defects in materials and workmanship At our discretion parts that prove to be defective will either be repaired or replaced or the whole product will be replaced In either case a copy of your proof of purchase will be required In case that any mechanical or electrical repairs are required during the warranty period send your complete product postage or freight prepaid to the Culer customer service center near you Call the number below to get the nearest service center This warranty does not include the air or water filters which are expendable parts that can wear out from normal use within the warranty period This warranty appli
Download Pdf Manuals
Related Search