Home

- DynaScan

1. ARA SR ory a e e A Master Provides 3 functions including volume adjustment Volume volume balance Balance and mute Mute Wave Provides 3 functions including volume adjustment Volume volume balance Balance and mute Mute Line In Provides 3 functions including volume adjustment Volume volume balance Balance and mute Mute This item usually functions to adjust the sound of the Capture input like DVD Player TV Tuner etc Adjustment of audio signal input is just temporary Copyright O 2008 DynaScan Technology Corp 104 5 7 9 Color Adjust This function is to adjust the output color or all Click Default Setting to restore factory setting YEO Cena e sr Par Display Piotr Moro Et Cipsa Aa Tohii Lrt Lag Femi RL Corts Dhi Fah aa air E i k oT os i 00 lehine Hiriy Tea E rr Pol Engines 100 Contr 100 The user can adjust Red Green Blue AU Wel 100000 AA Copyright O 2008 DynaScan Technology Corp 105 5 7 10 Network Setting This option provides network related settings for AP3 s DSPlayer including the setting of port remote publish login user name ECU firewall and Dynamic IP TROREO Gea ZE ee ane Herterork Sertiny Suri Tun 7 lupa Postear 3 gt as Fieger fe Mgr Wee gto Sache Habra Cord Er ble z lb fee r Cheer oat Laben Pon Pt Ramata State ERE Hemal Mectonno ee Pp po A Lento Evert Log DOU Function 257 cali weg Paca Loren Path l
2. 2008 DynaScan Technology Corp 144 6 6 ECU Open Operation Interface The E icon at the lower right corner on the OS desktop indicates that ECU is running Move the mouse to the icon and click the right mouse button to prompt the menu shown below Disable Watchdog Setting It opens the ECU operation interface Disable Watchdog It disables or enables the Watchdog function When the AP3 program stops responding Watchdog will reboot the system after waiting for 5 minutes If it is necessary to shut off AP3 remember to select Disable Watchdog to avoid rebooting Disable Watchdog is a one time only setting Watchdog Dialog When the AP3 program does not respond Watchdog will wait for 5 minutes then exit the window and wait another 30 seconds for users to decide to Stop or Always Stop as described below The system will reboot if nothing is selected Stop If Stop is clicked Watchdog will wait for 5 minutes and ask again Always Stop If Always Stop is clicked the Watchdog function is disabled and the program will select Disable Watchdog automatically Watchdog Dialog System will Reset 23 sec Later Always Stop Exit lt quits the ECU program Copyright O 2008 DynaScan Technology Corp 145 ECU Operation Interface ECU 0 2 4 7R 3 LCM Sim W Use Soft Wabchdog Connected Failed ae IW Use xP Firewall Message Display Area The message will be shown when
3. Able to Interrupt B Time Unit Sec Play All Under the mode of Scheduled Play if played content conflicts with another schedule the Play All E setting will determin if the waiting schedule will be allowed to interrupt the one currently playing If selecting the setting the interruption is forbidden if not ticking O the interruption is allowed Triggerable play items do not have the setup Directly click the column can change settings B Sequence item with Entire D Schedule item without E Entire End on Time Time Unit Sec B Sequence item with Entire D Schedule item with E Entire Play the whole item Time Unit Sec Comment You may enter a personalized description by entering text in the comment section and pressing Modify Copyright 2008 DynaScan Technology Corp 54 Editing Section of Played Content Label 1 Interface layout 1 2 and 3 Mode 1 reduces play list and enlarges expandable timetable Mode 2 equally divides play list and expandable timetable Mode 3 enlarges play list and reduces expandable timetable Label 2 To set start date Upper box setes date type and lower box controls date Label 3 Every Hour sets the frequency as hourly operation Label 4 Duration Time sets time length of play content One Time Play may be set for certain play types Label 5 Text box for entering comment Label 6 Modify fu
4. FEAT 2 Select destination directory Default directory is C Program Files DynaScan APs Select Next areal ia A wew tet be bhearr miry ihi Eran rel pried Beas fers toy gee Be rollo pee pers ee e ADO 3 The Setup Dialog box asks if you want to create a new directory Select Yes to create directory and No to return back to modify the directory Copyright 2008 DynaScan Technology Corp Setup 2 01 a x y 2 The specified directory does not exist Do you want to create it e we 4 Select program folder Default folder is DynaScan AP3 Renaming is not recommended click Next xi Setup wall edd progra cora ho the Poor Y oder iied Eolo Maa rede Reape ay rete Pokie name cl casket one han he irg Folder het Glick Ment bo courte 9 e allied aon aiai Mel har jm Pad oe l ay 6 If you wish to run the AP3 Config application please check the Run the installed application now box GkWare click Next to complete installation Tha Page Doris pe Lae Es Copyright 2008 DynaScan Technology Corp 3 Version Except the Version of AP3 it is distinguished by the Edition of Embedded or Standard which is applied to DynaScan Embedded IPC or Windows XP Professional respectively There are Client and Server types for AP3 Standard but AP3 Embedded is for Client only and it can connect to AP3 Standard Server 4 Start program lf this
5. FORT Maru blairae Cima Upon ER T E pana Ce Ej ii C Mikk Hide firai honto Fie Lint Min Download Speed f NetSeting im la E Mekhi Hr FT Stop hoia he Aut tato Wen 124 SR Hari Page Bob tom fT Tite 1000 fra e e Rea VELA PLA Lisa F lira APR T eee Sener PLL bs MA Peet C Pregan Fike Dye cn APMP T Chee T Served Fiel ft e a L Piceg E See r TS Fe FD Peat a 0752 MALA Crean Fl Dp can APP TC harris a a Pian Fit Wp care HP Chae a th ra Tarrat Speed ps Otli Tiersen bebe Upload Speed It sets the maximum bandwidth for uploading Max It uses 100 bandwidth Middle It uses 50 bandwidth Min It uses 25 bandwidth Download Speed It sets the maximum bandwidth for downloading Max It uses 100 bandwidth Middle It uses 50 bandwidth Min It uses 25 bandwidth Auto Start Up It sets the File Transmit Server to run automatically at start up The default is Auto Startup Version lt shows the version number of the current File Transmit Server Monitor Page Setting It sets the Monitor function Copyright 2008 DynaScan Technology Corp 142 Count It sets the device number for every update The default is to update one device a time Time It sets the time interval for every update The unit is millisecond and the default is 1000 millisecond 1 second Stop Transfer When selected the Server will stop the file transmission in between all Clients The affected item is only
6. Machine Name ClientO00 server Setting E IP 127 0 0 1 Ethernet Adapter pe Port 27ER 6 Auto Startup iw Firewall Server Port 2267 Save and Restart L Soft watchdog Enable iw FOT Port 8768 Cared 1 Local IP It sets the IP address of the machine used The default value is 127 0 0 1 Local Port It sets the port of the machine used The default value is 8766 2 Use Virtual Server It selects whether to enable virtual server The default value is enabled Virtual Server IP It sets the IP used in the virtual server This IP is the value that AP3 Config sets for the Client IP Virtual Server Port It sets the port of the virtual server used 3 Use Dynamic IP It chooses whether to use dynamic IP Enable this function after confirming it has a dynamic IP The default is disabled Machine Name The machine sets the name of the DynaNet server Ethernet Adapter It selects the MAC Address of the network card Note The function of Dynamic IP is only suitable for the DynaNet environment 4 Network Speed Download It sets the maximum bandwidth when downloading The unit is KBits Copyright 2008 DynaScan Technology Corp es lt SO 129 Upload It sets the maximum bandwidth when uploading The unit is KBits 5 Content Path Path It sets the access path of broadcasting content which can input a path into the field or click L to show the window of path Click the OK key to complete the path set
7. Start Time Start Time amp Date of play End Time End Time 4 Date of play Len Actual play time Diff Time difference between actual and appointed play length shows that the actual length is longer than appointed one shows that the actual length is shorter than appointed one Copyright O 2008 DynaScan Technology Corp 152 pa Closed Shows that the play ended properly section Belonged Schedule or Sequence Identify Name of played image The setting identifies the play screen of the corresponding record in multi picture play Computer Name of playing computer Environment Option Billing Report i ignore Content Path Work Directory Directory name containing Billing report and the button to change the path Ignore Content Path Once the Content Path is ignored the file in the same filename is placed under a different directory that will be treated as the same file The default is enabled Appoint Destination Directory of Billing Report Click the Work Directory button in Options to display the path dialog box select the directory saving billing records and click OK to complete the setting The new path will immediately be shown in the column Operational Directions Appoint Date Layout for Query Click the selection box in front of the Start Date and Stop Date This will select the desired start and end date of the query Click Query to list billing records within a selected tim
8. fod Pod 2004 4d Leanai Stale Tra Cope 1 ae Leen Tech Tet f 16 0541 F i 4 HHS A Caen bee version and the authorization valid period will appear as well Copyright 2008 DynaScan Technology Corp 118 Cima LEY Regisiei Smile df tl CHi food F Online Warning Trying to extend the licensing period by adjusting the time on your computer might invalidate the license Copyright O 2008 DynaScan Technology Corp 119 6 2 AP3 Config Client Introduction When the AP3 Client has finished installing run AP3 Config to configure AP3 before executing the AP3 DSPlayer for the first time Note that everytime AP3 Config executes the values and settings are shown in as the programs defaults without loading the previous settings Be sure that the internet is connected before executing AP3 Config AP Config 0 1 0 3 APS NetPlayer Chent Default Setting Network Speed Connect Setting Download 102400 KBits Per Second ClientIP 192 168 1 101 F Upload ho2400 o KBits Per Second Client Port 8766 Content Path FOT Port 8768 0 e Path CMDats O Server lF 192 168 1100 iy Server Port 8765 Dynamic IP Setting APS Auto Starup Aur w Use Dynamic IP Use P Firewall na Soft Watchdog na Restore Default Setting Load Current Setting Save and Exit Network Speed Download It sets the maximum bandwidth on the network for downloading The unit is KBits and the default value is 102400KB 1
9. 29 Note on High Sample Rates The Monitoring function significantly occupies CPU usage A higher sample rate requires more CPU capacity In order to maintain smooth video playback Sample rate may not be set to a refresh rate higher than 5 times second When not using the Monitoring function exiting the Montinor by switching to another function e g Media File will help avoid video playback issues Not applicable to all conditions some graphic cards will adopt Overlay as display pattern under certain accelerating mode in order to achieve better efficiency in real time picture play However current monitoring function does not display Overlay image which may cause a normal picture on the DynaScan but appear blacked out on the monitoring screen 5 1 9 Additional Information What is an accelerator The accelerator helps to achieve better video playback and efficiency through different imaging techniques and hardware support However choosing an inappropriate accelerator may cause low efficiency and even abnormal display Lower Middle Highest and VMR7_RL are 2D accelerating functions in which Lower has highest speed but poorest video quality Highest has best video quality but slower speed D3DVR VMR7 VMR9 and VMR9 WL are 3D accelerators Hardware accelerated graphic cards supporting Direct 3D perform better in layout quality and efficiency than those supporting 2D Clone and Clone3 are special versions using an imaging tech
10. Clear Click this button to remove all capture devices in the list Device Description First specify the device from the Device ID list The parameter area underneath will load the devices value Input the text description of the device in the filed and press Enter The input description will show in the Device ID menu and Layout editing area when users specify the Device ID as the source For example when the VGA Capture is set to Device ID 02 it will appear in the figure as shown below to give users a better understanding of the device being selected Accelerator Defaut Maintain Agpect Ratio Resolution Default pe Device ID o0Defaut H 00 Default i J E Copyright 2008 DynaScan Technology Corp 101 are Lah EGET a width Jn Haigha 1 0000 7 Set Asyn corte Dead Y Slot Fun Capra Original Volume Setting Volume adjustment will affect the general volume of the Capture input However individual capture settings can be adjusted to balance volume difference of various capture inputs Volume adjustment procedure First click the Begin Adjust button pull the current time indicator to adjust volume with the corresponding values displayed in the column in the lower left corner and click the End Adjust button Tuner Setting Country Code Input the correct country code of your location Input Pin Use 1 as the default pin Input Type
11. Do APS A E OE REE eesenss 123 64 File Transmit Glen ii dida cli 125 60 Pile Transit oeyoo E E xe cece cee So E neces 131 A Oe a STOEL ee EER IR See ne ee he eRe 145 077 MESSage Edad acid tod acido tas 147 A nn rite ee ial pest ale eters 151 6 9 Decoder Instala asii ito 156 PAD CINOIX 2 AAA AAA AAA AAA O EA e ADO 158 DynaScan Models Resolution LiSt cccccccsssssssssseeeeeeeeeeeeeeeeeeaaaeeaesseeeeeeeeeeeeeeeeeeeseaeeeasadeeeseeeeeeeeeeeeeeeeeeeeeesaaaaaaassseesees 158 1 Introduction DynaScan AP3 is a set of front desk play control software of advertisement publishing application system for use with DynaScan 360 degree video displays This software may also be used for other various general display devices This software can be installed in Ordinary desktop computers industrial computers or computers with built in operating systems to provide basic media play functions playing media files picture files Power Point files and Flash files as well as traditional analog videos and satellite digital video This software has been designed with advanced functions such as maintaining a record of commercial ads played displaying marquees and various other functions If installed in advanced computers with ideal performance the software supports the function of displaying multiple videos simultaneously which users can independently arrange the position of pictures as well as adjusting their size overlapping etc DynaScan AP
12. Next Day to ensure proper action of setting If shutdown time is set as 23 30pm later than boot time at 9 00am Next Day setting should not be ticked Label 4 Adds action to action list Label 5 Modifies preestablished action After modifying information of an action you must click Modify button to save current modification of action to item or changes will be lost Label 6 Deletes action from action list Label 7 Test action time Considering complexity of action setup AP3 provides the test function enabling users to test validity after completing setup Test Proper Operation of Action Item Action Items may vary significantly because of different locations or business premise of each display Pure scheduled action everyday just requires simple process However if actions have different time settings or temporary action is set up someday based on special needs the user cannot ensure proper operation of action at set time which causes emergence of test function Copyright 2008 DynaScan Technology Corp 61 20067 7 21 Friday y 13 30 03 Shutdown 2006 7 21 23 30 00 Friday The user should first select test time and date Only actions later than test date will be tested Once Test key is pressed the information box at the bottom will show the next coming action If not detecting proper operation of action within 3 days the test will report Disable Click Play button to test if current
13. The program publishes the files of the selected machine in themachine list after files are selected and the Open button is pressed The selected machine will auto update APS after the file transfer is complete FDT 4 File Tramemis Serves Command Pubiih FOT qi Marge bhatt Corriera Dor 7 g Y Yo alx wis E fo ores TE i i Docus al Str AAA TFE oe DE A FF aS i od brah 9 AA Fe eS sonra 1 TE ey JIK na dal E 4 Pr i MW ETF 0308 IENA FE 0575 Sera FE GF 16 MATIAS TE ie IRE 2005128 FF 1012 LRE OA FF 1017 We Soe FE ee TOR ra FF Gee 16 SAS FP hed Local Server Remote Facility eon O N L i op he E En agm Fie rae be PMP ara es en E Uaf a o er Dyra in Pal oe es AER 2H Fial A Wa Saa Flea Demi TFT arnal FT Sorron FeLi I fi Tomcat CP ieee Fikes Daba an AP SPT Charlene FO TR at AXE lin hon CPs ar MA PT Oe Tree ie i Rape bi Pa s Pi Pld ipa a APR Cre TS saree Race el ath en al Detter dosed Wp Clb Dora U kbs Copyright 2008 DynaScan Technology Corp 136 Users can perform a FDT connection with selected remote machines After connecting upload the file from local server to the remote server or download file remotely The functions and list of local servers are on the left side of the page the range below figure in solid line The functions and the list of remote servers are on the right side of the page the range below figure in dash line 1 Machine List Cli
14. hour minute second Length ms The actual playing length The units in milliseconds Difference ms The difference between actual playing length and specified playing length The units in milliseconds Closed Does the play end properly No refers improper end of play usually because of computer down or power failure Computer The computer containing the billing records How to use these materials A file with the text separated by commas can be read in any version of Excel Copyright 2008 DynaScan Technology Corp 155 1 Left double click DynaScan Decoder 0 1 0 2R exe Note to install executive file and click Next after entering installing interface Note 0 1 0 2 in the name of installation executive file refers to the released version Please refer to the actually installed version of Decoder x Pynascan Decoder 0 1 0 2 Setup Ed Lie Danes ia se denei ennn Toetepa peace She of ue er pe belcis jia Peme ckt Hed io coras o Cancels skari Ha getup ponpen 2 Select destination directory Default directory is C Program Files DynaScan AP3 Decoder Select Next Setup ballets Dye cae Dice i the holes deci ie GkWare Toril do dei decia cl Hed T alalis 4 Dirt ductos Cok Bees Aral ialis Hei To abad She rason process cl Cancel Deir Dee Gugan Fist im anA bena Mte 3 The Setup Dialog box asks if you want to create a new directory Select Yes to creat
15. 2008 DynaScan Technology Corp ess lt i s i lt CO 89 Click Last Action to show the test result with the time specified and the status in the Schedule list The figure below shows the test date is 2008 02 26 Tuesday the test time is 09 20 11 and the test action type is Power Control Click Last Action to see the test is running Set Power On schedule Test 2008 02 26 Tuesday f Set Power ON 09 20 11 Schedule List l Disable Schedule Resume Save Append Modify Delete Test State Action Type Action Time E E fm gt 11 i Spin Speed Fixed Everudap 08 00 00 z MO Brightness 100 Everntday 09 31 00 E Mo Brightness 31 Everudar 08 00 00 4 MW Spin Speed Stage 12 Everyday 12 00 00 5 Ih Power Control 008229 06 00 00 5 Day Later 09 00 00 E e Power Control Wednesday 17 08 00 22 08 00 T e Power Control 05 03 09 11 00 21 14 00 E e Power Control Everday 08 00 00 1 Day Later 04 00 00 lt displays all the set Actions Each Action has 4 columns Index number The smaller the number is the higher priority The position can be changed by dragging the action to the appropriate number State Shows the Action status M means the Action is valid while means the Action is invalid Action Type The Action that is to be executed The user can click on the Action Type title bar and it will re arrange the list based on Action Type without losing the order
16. Action Time Displays time of action Copyright O 2008 DynaScan Technology Corp 59 Function Buttons El Save Saves settings Shutdown settings will not be stored nor will operation be executed without Saving Edit layout What is Action Item An Action ltem consists of three parts the type of Action ltem the date and time of execution and the position in the list or priority setting of the Action Item Types of Action Item The type of Action Item includes Shutdown Reboot Restart AP3 Not Shutdown Start Play and Stop Play Shutdown To execute Shutdown operation of the system The ticked setting of Power Control Enable under Monitor System in the Option will send Power Off command to DynaScan display at the same time Only one valid shutdown time is available per day Multiple Shutdown commands on the same day will be determined by the highest priority highest location as the valid time Reboot Reboot operating system at designated time and date Restart AP3 To restart AP3 at designated time and date Not Shutdown Disables all Shutdown settings on designated date without affecting Reboot settings Start Play To play contents at designated time and date For instance if the time of start play is set at 11am and shutdown time set at 9pm the player will not start play at 9am when the computer is powered on but will execute preset play content at 11am Similarly if the computer is powered off at 10pm content w
17. Copyright O 2008 DynaScan Technology Corp 90 Resume Jacintme y l i Disable Scher Append Modify Delete Test 1 Mo ASpin Speed Fig i eryday 08 00 00 2 r Spin Speed Stage 12 Everudar 12 00 00 3 r Brightness 100 Everday 09 31 00 4 r Brightness 31 Everday 08 00 00 M Power Control 008229 06 00 00 5 Day Later 09 00 00 M Power Control Wednesday 17 08 00 22 08 00 ral Power Control 06 03 09 11 00 1 11 00 18 r Power Control Everday 08 00 00 1 Day Later 04 00 00 Action Time The time the action will be executed It will include the end time if the Action type is Power Control Rule of Priority When there are two or more actions with the same Action Type the one with highest priority on the top will be activated when the time is overlapped Ex A is Power Control 8am every Sunday and valid for 14 hours 10pm B is Power Control 10am everyday and valid for 10 hours till 8pm since A is above B the scheduled action is to turn the display on every Sunday at 8am and turn it off at 10pm while turning the display on at 10am and off at 8pm for the other days 11 AFP Pos Lortral Funda HONIT 2200 007 BEF Paver Lowered Everday TEHO 20 00 009 Copyright 2008 DynaScan Technology Corp 91 If B is above A then it turns on 10am and off 8pm everyday action Time 1 BP Pis Control Everday TEON 20 00 00 AF Poa Control Sunday OO 22 00 00
18. Corp 21 Note For Playing Flash Files Only Flash files with a swf filename extension may be played in AP3 and require IE6 0 SP1 or later Because a Flash file aspect ratio cannot be altered the resolution of the Flash file resolution must match the native resolution of the display When producing Flash files users should refer to Appendix DynaScan Models Resolution List for size considerations in order to achieve the best playback result Page 158 Copyright 2008 DynaScan Technology Corp 22 5 1 4 Power Point Flay Contol 8B EORa A F MefaFe Cactus Fih Perera Port Web Pace DB T Top a o mp 060m pao 0 0t i i s Right 0 Content ETO Wied 10 060 AM Click to open the file browser window and select the desired Power Point file for playback Screen Scope Input number of pixels and press Enter key to change scope Top Moves screen upward Left Moves screen leftward Bottom Moves screen downward Right Moves screen rightward Accelerator Select the video hardware accelerator used to play content When selecting Default AP3 will default to the accelerator setting in the Options If an accelerator is specified only the current content will adopt the accelerator setting and no other content will be affected nor will the accelerator setting be changed in Options For more information about accelerators please see page 30 Copyright 2008
19. Display Display the drives free space FDT Manager The users can view the state of the FDT command in the main window This page is designed for technical personnel File Imami Serves Command Pub FOT FUT Manage Machines Corrections Optom nr Diras Gea SO FF Ce A Flo Tepes De era DF 1370010 A AG 1 HH 5001 i Lera Doa rn TS tee Cont o A Te a a iS Doma Ena NA FF T Pie Jera Dia Deepa 1 er T a 2 000 70 NAAA 471 IO Der Dee En ASS FF OE Dr re AA AO 163 00 ee E LG Diarias adw MORA PS AA Fe Ta De sr Dis rs MAA A 17 000 10 MALA ee i Goede Pong A Indie I PP A Cote Crogan iran PPP Terre EA DAA AA i Up ipine Trama Hae 07 D ueri pe MN AAA 1 al Dhow Ace wf bre Derrida w hr plo e hor Doa at Zo pe a I k Fiai H CAP Flew mica PPMP arali eeri F bolsa fi A Tee Pra Fb hein PMT here Sera ide FOP at 8759 bon E Pon Fila dhna BP MPT ro rro cell ati Paga Pa Pte Filed ree PT Chae 7 Sed Aegis ra FOT Teng Fah CP cep ie Fi ne eT eT ee e Tanabe Speed Up Okie Down F labo 1 State List The list displays the state of the FDT command It consists of three types of commands Action Download and Upload This list is designed for technical personnel 2 List Content Option Right click the mouse on a blank portion of the screen to display the list content The user can click the item which they desire to display in the list The items include Show Action Show Download
20. Server Failed Remote Function Set Speed Min Reset Server It sets the connecting Server of the selected remote Copyright 2008 DynaScan Technology Corp 140 machine to the appropriate server This button is only enabled when the status is in the Server Failed state Set Speed Max It sets the selected remote machine s bandwidth to the maximum setting Set Speed Min It sets the selected remote machine s bandwidth to the minimum setting Connections Users can check the number of remote devices connected to server 1 File Imomi Server SES Command Publish FDT POT Marge Machine Lonreciar peon Cited Lewd fr ered 1 Level be bl cr Lil Lia Cai Galira Mesha Lit Gol Machine Lint Lar Meche Lil Da Machire Lint aye Tarecfer Speed gt Ep Otlet Doras O kbs Connection No Time List The entire list will continue to scroll to the right as the time goes by Move the slider to check previous information The X axis represents the time while the Y axis represents the connections which indicate the number of remote devices connected to the server Display Level It sets the level of connections Level 1 Level 1 1 per grid Level 2 Level 2 10 per grid Copyright 2008 DynaScan Technology Corp 141 Option Setting Management Page Users can adjust the network management function such bandwidth usage and settings etc 1 File Transit Server x EBk Carrere Publish FOT
21. Set up cable or antenna according to the input source TV Channel Channel options of TV signal Default Setting When the user adds a new capture any adjustment of the default setting will affect the original capture setting Use Quality Setting When this function is not selected the content uses the devices Default Quality setting If this function is selected high definition video quality will be used Copyright O 2008 DynaScan Technology Corp 102 Capture Default Quality High definition video quality will return to the devices Default Quality setting when clicked This function can only be used when the function Use Quality Setting is enabled A playing contents will be suspended at the same time the button is clicked Copyright 2008 DynaScan Technology Corp 103 5 7 8 Volume Control The AP3 volume controller is attached with the system volume control 4 in the operating system The user does not need to start the volume control of the system just use the AP3 volume controller PO Option E P fol olf T a SBOSOba kE LG SAN Volume Cos rol tario Har Display Pie bigar Beem Hara AT 5 i E en fs i Balis in rr a al Aroa Had RA Shee vert Lag y Penig Wihuri BE Coria SPT Pas Laia Lati q_ __ ____ _____ Cae Ajo Hara er Corera STP Sete Poa Loria Meene Hori Tea Faber il A
22. Show Upload Show Done and Show Failed Copyright O 2008 DynaScan Technology Corp 138 Machines The user can Append Modify and Remove the remote machines 3 Fila Trina Series Command Pubish POT EDT Manager Machines Connections Option ESA ASS Be POT Pe eed Derren jy E E gt TE Darii 127 001 Aiko SAB IE E 115 168 1 101 Ahi eh gr Append Hodis Rettarre w Ayo Remote Fonction EA 2234 lr Fa e LD cr nl ir A UA aren DAA prec Pub ana ee ir MAMARIA m E Docus a Pair ir poca Dai rca h Servet Plat hi 102611221 Fiki Ceme and Being Upsr erkan Data pesca urra S e fh Z a ep a l a Fie ra AP P L E a ti MEA PDT Pot REH DIA eee s OD eee ed Seg a lr A Daa ae Pus ave ee Eer ada ree eat Peces Path a EADiocunerds ered Settee ren poca Dalla Pibe Alegia ath rd Tar Spit Wipe Oika Dewe O kb 1 Machines List The list will show the registered machine in the Server The information displayed includes Index Machine Name IP MAC MPT Port FDT Port Upload and Description 2 List Content Option Right click on the list to display the List Content Option Menu The user can perform remote device management and whether to show the Auto Check option in the List Append This will show the appended machines Area 1 FormHachineEdit Name Demo 01 Description IP Address fi 2r 0 0 1 MPT Part 8766 FET Port 8768 MAL W Upload Cancel OF Name It enables the name of the machine to b
23. Startup Run for it to display content First select the View you wish to modify and click button to the right of Startup Run to launch Startup Run Setup Choose the type of content you wish to play for selected View in the left hand side choose the file on the the right hand side then confirm with OK The file type and path will appear under the Startup Run button for reference and a button will appear beside it should adjustment options be available lf content has not yet been assigned to a View the button next to Startup Run will display NONE Copyright 2008 DynaScan Technology Corp t i lt CO BS PT Layos Editor Naw 7ERCRBOQHW KE OCHS are E Dea Pasan Oe Oe Pee Oe Peed OP eed le Pee Pl Peer i Figen ee IN re AA Wied 10 30 40 AM Sta Tina 00000000 ed Er Time sa eras 360 340 Digitol Media 3 af13 2008 Wed ISO AM Copyright 2008 DynaScan Technology Corp 36 Remote Publish Server Only Click the Remote Publish button to show the Machine Select browser which lists the target name IP and ports of remote devices that have been set up in AP3 Config see page 123 for more information about setting up remote devices Select which targets you want to publish to you may select individual machines by using the individual checkboxes or use Select All for all devices and Clear Select to uncheck all devices Publish can be set to spe
24. View Mame Regio Left aa Top fo width 2334 Height foon Set Region Accelerator Default Startup Aun Media File Media File ALlemo avi Set View Name Assigns a Name to the selected view Input new name and Click Set View Name to rename the view Set Region Modifies the position and size of the selected view Coordinates of currently selected view are displayed in Region with unit size of the screen based on a 10000 x 10000 scale regardless of the size of the display equipment After inputting view coordinates and clicking Set Region the view will adopt the new set coordinates Accelerator Click button to individually assign the accelerator used by the selected View Using the Default setting will apply default accelerator setting in Option Accelerator setting will apply to the selected View only no other Views will be affected nor will Accelerator settings be changed in Option Startup Run Set the content to be played within the View Click button to the right of Startup Run to launch Startup Run Setup choose the type of content you wish to play for selected View in the left hand side choose the file on the the right hand side then confirm with OK startup Eun setup NONE Media File Change Path Set Played Contents for View A newly created View will not contain any default information therefore content must first be assigned to
25. different capture cards For instance sources from two capture cards Capture A and Capture B in one computer may be played at the same time Two different sources from the same capture card cannot be played simultaneously e g playing Composite and S Video startup of MultiScreen Function If MultiScreen is set as the Screen Type in Option click to play content immediately or to set it as Startup Run AP3 will display the dialog box shown below asking which screen you wish to display the layout After selecting the screen the layout will be then play on the chosen screen x D E T Layout Edi or New CANON E A O A E EN oa it at E Dast paien D Dajot Paten 1 DHe Paten Dawk Peter 7 Deak Parar Deiat Pasar 5 Mult Screen 3 CT ANIOS Wied 10 31 80 AM 0 Note Only Screen 1 can output audio for MultiScreen models thus please allocate the content with audio on Screen 1 Playing Multiple MPEG 2 Files Simultaneously The ability to play multiple MPEG2 files simultaneously will depend on efficiency of computer hardware For instance a standard DynaScan Embedded IPC will achieve the best results when playing no more than two MPEG 2 video files simultaneously Playing three or more MPEG 2 files simultaneously may require additional hardware upgrades Copyright O 2008 DynaScan Technology Corp 38 5 3 Sequence Gl Introduction The Sequence Editor is used t
26. display area shows in curve soil List View The record display area shows in list Load Record File Load Record File It loads the storted temperature record ae sie Restore lt restores the temperature record of the display Export Record Clear Record It clears the temperature record of the Sacco display 0 Eo Mow Export Record It exports the record of the display to an Excel file Go to Date lt moves the record s display area to the selected date Go to Now lt moves the record s display area to the current date Copyright O 2008 DynaScan Technology Corp 95 Date Dialog Clicking Go to Date in the function menu will Pl March 2008 prompt this Dialog Select the date and Sun Mon Tue Wed Thu click The curve in record display area will a gp fee oe be set with the selected date in the center 3 10 11 12 13 16 12 18 13 0 23 HA 25 26 27 30 3l lt Today 3 24 2008 Record Display Area The record can be displayed in two ways one Is a Curve and the other is a List The curve follows the time bar to draw the temperature graph When moving the slider on the curve the temperature recorded at that time will be shown In the list display the first column Time is for temperature record The model specified determines the temperature measurement It varies depending on model The one that is specified in Advance control determines the position name of each temperature measurement M
27. for automatic play in each playing screen Multi screen setup does not provide a background music setting SCR Oa maria Sinttup Fiun Seren Y Lorist pr HEM 2 Soe i Thai Protar E 3 EH L Scan ser Caps Compote NTSC Some J bar Sytem Diparadoa bara S5ebhoddo Evert Las Pasodro SL Cord Dead Pith Capture Lastima alar cbr Lar hdd Rote Sete Caral 141 Patri Pisah Laria Ret urze Morice Ted Pear E daa AA Wied 10 4 AM Copyright 2008 DynaScan Technology Corp 74 5 7 3 Display Position Even with the appropriate model selected in the Startup Setting a slight error may exist in the position of the image on the display Display Position allows for fine adjustment of the position of the output image a EE T a Diagloy Position fe bbe Pate el rr Teen Dia a y te r Doce fin P E Eoo Maghi e Top BA Benem 04 Hass Herrar lei Fan e EI EI i DUO Weed 10 20 AM Move Zoom Out and Zoom In Move Position To move the position of whole layout by pressing corresponding icon g represents to move upward P downward E leftward and 157 rightward Zoom Out To enlarge layout with following direction icons represents to enlarge upward Y downward leftward and b rightward Zoom In To reduce layout with following direction icons Y represents to reduce upward A downward b leftward and rightward Copyright 2008 DynaScan Technology Corp 75 Di
28. is your fist time running AP3 please run AP3 Config Start gt Program Files gt DynaScan AP3 gt AP3 Config to setup initial settings before running AP3 DSPlayer for the first time Please refer to the instructions of AP3 Config Client Page 120 or AP3 Config Server Page 123 for more detailed information To start AP3 click Start gt Program Files gt DynaScan AP3 gt DSPlayer Copyright O 2008 DynaScan Technology Corp 8 5 Operation Main Menu Configuration and Function Buttons Stet 00000000 ex End Time on e ware ma j xe A e La Ds T FT Sees eo Fa EP i E mm hm ml Main menu configuration consists of four sections ps Label 1 Main function buttons Ea 3 lee ak Illustration of function buttons from left to right te Preview Player En Layout editor 5 Sequence editor E Schedule editor Scheduled shutdown control LE Plug ins management Options Y Play All play startup run settings in option A Stop All stop playing Copyright O 2008 DynaScan Technology Corp Label 2 Operational function section of played contents provides function buttons like Play Pause E Stop backward forward jump to beginning and jump to end The section also provides the track bar of file progression and a Current Time Indicator CTI that will move along the timeline Clicking and dragging the CTI will chang
29. maintain the original aspect ratio check the Maintain aspect ratio box Because the aspect ratio of the content may differ from the view window black margins around picture may appear Note on Displaying Picture Files Displaying an image file resolution higher than 1024 x 768 may result in a black screen or other display error Copyright O 2008 DynaScan Technology Corp 28 5 1 8 Monitor When a compatible graphic card is installed and the display mode has been set to dual view or extended desktop the software interface will not be shown on the DynaScan display hiding operation from public view Because users may not be able to directly view the DynaScan Monitor allows for real time viewing of what content is being shown on the DynaScan display M Hip Cannel PASO Me i Cactus Fish FomerPont WebPage AET Petse tonta 360 360 Digital Media ANA hed OD AA Monitor Target When computer system supports over two display equipments monitored screen by selecting it from the drop down box Once selected the monitoring screen to the right immediately shows the layout of monitored target Presently up to three screen numbers Screen Screens are available Sample Rate Refresh rate of the monitoring screen 5 times 1 second The highest sample rate 2 times 1 second 1 time 1 second Default 1 time 2 second 1 time 5 second The lowest sample rate Copyright O 2008 DynaScan Technology Corp
30. option ME LD obs y iio aire f j kiia j i Fars imable Aeiio ren ple Dri Pien Sa Piee 1il a rex Hora cen I Lonas a2 DAA E ii Scheie re 4 E vent Los AA EA we HD SF OE Ail Fol Cornisa TNA LE 41 hel lah AN ah iF Captar Ste TADOS OBEYS 45 Mali Carol Colla Mia SOO te Oba 44 bite e SiS DIAN dE Gere 2007 09 12 ee 4 M1P paling AOL A 45 Powers Corte Fieles Mendes STA IE DEC de he I aT ical SOE OSI 8 SOV OS 4 2007 09 72 0562981 BD An Of A eS m i J eS a qi SOO eal dil rls hw ere se 2 2 2 2 AEA Wed CAD AM Copyright 2008 DynaScan Technology Corp 96 5 7 5 ISC Control This option provides the user with control of the ISC Connect the computer to the ISC RS 232 line Set the appropriate RS 232 COM Port of the computer in Serial Port field AP3 will gather the settings in the ISC and then allow the user to control the ISC by using function buttons similar to ISC remote controller Please refer to ISC documents for a guide on each of the functions Ex ras ei ISC Control paler Sana Pon pa probo Tei E oa O po Thik AA p REGA ta RT ee ESA EOS E E az Do Al EET Ss Mercure Moral Sieger ie E dpi tve Pesa nn pm z i I nos mmnm g adu um D a a me aa i a m am boom aooo eS o Erp m ANA Wied 10 01 40 AM Copyright O 2008 DynaScan Technology Corp 97 5 7 6 Default Path The AP3 softwa
31. or Shift keys helps to select multiple contents and only billing records of the selected content will be listed in the billing report Option ALL enables to view billing records of all the content Export List Click Export File to show file saving dialog and input a filename to complete the list export as the result of the query Exported csv file includes following columns summary of Played Content Played Content List File Name Name of Content including type and content Play Time sec Time length for playing the content the unit is in seconds Play Count Number of times the content will be played Total Time sec Total time for playing the content the unit is in seconds Start Time Start Time amp Date of first play End Time End Time amp Date of last play Copyright 2008 DynaScan Technology Corp 154 Detail of Played Content Played Content List File Name Name of Content including type and content Play Time ms Appointed play time with the unit in milliseconds File Time ms File length with units in milliseconds Identify Name Name of the played image The setting identifies the play screen of the corresponding record in multi picture play Section Name Belonged Schedule or Sequence files Start Position Position at Start Time Play Position Position at End Time Start Time Start time of play year month day hour minute second End Time End time of play year month day
32. relevant information of previewed files Played time on the left and total file length on the right followed by file name and playing status 4 Label D Start and stop Preview The previous chapter mentions partial play is available to preview window Video content may be viewed in preview window to avoid size error detected after pressing La Play key Illustration of Function Buttons Label 1 6E6SDObs e Meda Fis Coches Fish Pem Pani WebPage DWBT O Pense Moria MEN La Play Immediately transmits image of Media File Capture Flash Power Point Satellite and Picture to play screen kd Set Startup Sets current play items and their parameters as default For example If Startup Run is set up as Capture in Option enabled AP3 will automatically play Capture settings in current editing section With the exception of Sequence Schedule and Layout only Capture can be specified as Startup Default Copyright 2008 DynaScan Technology Corp 13 5 1 1 Media Content Click to open the file browser window and select media content Preview or play selected files with supported image compression formats The corresponding decoder must be installed to the system for proper media playback AP3 has been equipped with decoders for MPEG 1 MPEG 2 and MS CRAM for AVI files MA TE Ee FF Hecha Fie Capiro Minch Po Poni web Page TO Picker Mondor all sl eae ee A H VE IE Bire
33. sets the machine name on the DynaNet server Ethernet Adapter It sets the MAC Address of the network card used NOTE The Dynamic IP function is only applicable for the DynaNet environment Copyright 2008 DynaScan Technology Corp eses lt s sSsSS 07 Soft Watchdog Enable lt enables or disables the Watchdog software When enabled the Watchdog software will monitor the operation of AP3 DSPlayer and if there is no response from the DSPlayer for 5 minutes Watchdog will reset the Embedded IPC By default this is disabled Restore lt restores the settings to the previously saved state and aborts the changes made Save and Restart lt saves all settings and restarts the AP3 DSPlayer The new settings are applied after the reboot XNOTE The value or name set in the network must be the same as the one on the server for proper connection Copyright 2008 DynaScan Technology Corp 108 5 7 10 2 SMTP Setting lf the SMTP Simple Mail Transfer Protocol settings are enabled the program will send an e mail to the specified mailbox to notify the user when the device is encountering errors or the problem is resolved VR OCEOBRs EE F Erre o Paz oy rl eto un hd IP Satin Dreta Piotr ee oe a rl Moro Sacer SMTP Sanne Diaria Deny A Apa Hal igri Peal nii a F ahii Sbedule mE Evert Les Sara Por 10 G5 Fema La eo do do n So Pe a RL Coria A Dd Pase Cara Latin Mied prae mr Lan Sard hara er larur y Pera
34. validation period of 30 days Trial Mode Input the authorization number within 30 days to release the full version imnmacan APS Hopiitor DynaScan w Hagia ike Maris s Det A BEA sgiu re cL SEP PE E impor cere I ie weenie Lila Tang Humba Eangi cand Lode ald FI piapa seme 1 pe gt ered Y ade Be ee 1 bhei epli aki Pend SCL dl cere Slate Tred Copec 19982006 Dace Tet lol 22 23 0541 Fa HAM EA hiig Ar daran coa de Copyright O 2008 DynaScan Technology Corp 116 Get and Input AP3 Standard Server Authorization Number Server version has two er Register ways to input the pa Dynascan authorization numbers One is to do it manually Gon Mumbo inci Pirili Fle Click the first button under Register File to open the register file containing the register code or directly search in C Program Files DynaScan AP3 Locate the register file with the same register code shown in button the filename of register code consists of combination of 14 alphanumeric characters with the filename extension register E mail the register code back to relevant department of DynaScan for an authorization number a Mara F Drine DAGIT EEA igir Lora i reri F Sen Code ld E Sen Dees Sees Sa abel Pa o MULA sd Liamis Mile Tia Lone ALA rabo Tech Tet f Td Pas 26 J SRHRAS A Gam her DynaScan will provide a set of authorization numbers after receivi
35. xl Sh SRE Be ae ER BE BE ee BE Be aL ASE BE FINIT wee ETO 157000 Fe e A Se EO Hon Ee Toe II Mw crea ERE A o ds fiers i eres y pu er lag Delete p 15 uk in key sd eps i Anna Carta SA KCapisa EW Capture 54 5 Hic ate E de Caper H 51 seg ES Chee Flt MA eH H hr lh gt I ALARE Weed JORAM Effective Date of Appointed Play Schedule The function of Start Time enables effective date of content If the function not ticked the status is disabled not capable of appointing date if the function ticked the schedule will be played from the appointed date before which all items will not be played Start time of played item earlier than effective date will be played then with play time outside the scheduled layout deducted from play length The function of End Time enables end date of content If the function not ticked the status is disabled not capable of appointing date if the function ticked the schedule should stop playing on the end date and not be played since then If the end time of some items is later than the appointed end date the operation will stop automatically then T iStart Time 20067 7721 T End Time 20067 77 21 Background e Clear General Setting of Play Item General information of a play item includes Type Type of played item e g Media File Flash etc Name Refers to the name of the play item see pg 43 for more inform
36. 00MB Upload It sets the maximum bandwidth on the network for uploading The unit is KBits and the default value is 102400KB 100MB Content Path Path It sets the path for storing the playing content First click Path and enter the path such as D Content into the field or click to prompt the Content Path window as the figure shown below and specify the path for storage Ex the figure below specifies the path to be the file Copyright 2008 DynaScan Technology Corp 120 folder Content in Drive D Device It sets the removable drive to be the path for storing the playing content The program will first check if the removable drive is supported and is available for selection The device will show in gray and is unable to be selected if the device does not exist Click Device to pull down the menu and select the device to store the playing content The supported devices are CF Micro Drive SD MMC MS MSPRO and Smart Media NOTE Only one Path and Device can be set Content Path Er My Computer 1GB2 C an o PETES Disk T Removable Disk L Removable Disk H Control Panel My Documents Shared Documents Documentacuments Network Places a al E E E E H My Mp Connect Setting Client IP It sets the IP address of the client Please connect the internet cable before executing AP3 Config so that the field will show the PC s correct IP address If executing AP3 Config without connecting t
37. 2 sey Deal 15 Heda Fils 0 Santer Den mpg el li Ge TA 212 Wa 11M 03 Ti taal 0 li Mika Fla E it Dies mpeg TEAMING hs 0116 aa a e 1247 cij Civ sd 1 Heist Donte em meg ANA TAE 1 HI Ta 1412483 Dieta 15 Mee Fl E mbr Demo rey A AA 3 212 Wea Ie ay Tayi SEWN See a 15 Heist Eiee s mea TEATS eS any Hy Wea 21250 Aii P Zu Haki File Ear mpg DBA 001645 011821 1135 Vea 1202 261 Were al Heat i Donte Deel ey A NA TA lt 1 Ta 141254 AA i zz Heia fa EA Contarini mpg SAIS OE ii H Waa PPE T aT zt Heia ti EL orbe Dee meg SWEATS O SO ee T Hi Tes 1212503 Teyi 4 Hiii fi E Dir a aj 064121300442 013106 L 212 Ya 120 sex Def nt 5 Ho i Fide E Mimbre moy Pah Fear eg ec ae a any il Wea 12125 Uart a Hels ike ALDO eg SAIN eS Oa LE H Was 1342 caj Tha alt zr Hinde Pis Ciota ea moy SMELT MA Vid tT Tes 1212 581 Tefal 230 38 Media Fis Donte Densi moa AEAN MATAS a hee Def Teal Play Tor ANS b CIEE TS Tom Raced 2902 1 1517 Seine inate ten bm Coad Sexton tert Comouter Pozsi Leal Jta Lsa ET Loam Local Local lineal Pcia Local La Local Local Local koeza Local Lol local Local Jl cms Load Local Local Lc all Local Show Space Time The list will show the space time without play material Export File To export Excel files Exit To return to list of play material Index Index of play material Filename Name of play material
38. 3 includes online operation optional If a computer is connected to internet intranet with AP3 NetPlayer function the user may obtain real time play status and play records change play content immediately or schedule files to transmit and play video content Managing play equipment via a remote location can more efficiently utilize the equipment by significantly reducing labor and time System Requirements and Installation Direction System Requirements Recommended Hardware Configuration P4 1 6G CPU and above 512MB Memory 100MB hard disk and above Video card supporting DirectX 9 0c and above NVIDIA 5200 or ATI 9200 and above Sound output hardware in accordance with AC97 standard CD ROM or DVD ROM Software Microsoft Windows XP Professional SP1 and above DirectX 9 0c and above should be installed 0 IE 6 0 SP1 and above for Flash play PowerPoint Viewer 97 for PowerPoint 9 Copyright O 2008 DynaScan Technology Corp 5 1 Left double click DynaScan AP3_0249R_Standard exe Note to install executive file and click Next after entering installing interface Note 0 2 4 9 in the name of installation executive file refers to the released version Please refer to the actually installed version of AP3 x DynaScan APS build 0 2 4 9R Standard S PURA O Weoo tothe ratan AP Sete Prog 8 AZ Coca Te nad probes pines Glee all rang rd pas Pose chek Niet to contro on Canoe bo abot the setup
39. 768 Register Name The DSPlayer registers the path name to FDT for data storage When the remote user and client are doing a FDT transfer the client FDT will provide a shortcut to the remote user to save time on file searches Billing It is the file storage path for billing that set up during registration The default is billing Message Log It is file storage path for Message log that set up during registration The default is MessageLog Event Log It is the file storage path for AP3Event log that is set up during registration The default is EventLog Common Path It is the storage path for common data that is set up during registration The default is CommonPath Itis in a hidden state Content Path It is the storage path for Content that is set up during registration The default is ContentPath Firewall Set lt connects to the open port of ECU and manages the firewall through ECU ECU Port It sets the port used by ECU The default is 2267 Dynamic IP This setting is required when the client IP address is dynamic The input IP Port and Name have to be the same as the settings on DynaNet server for proper login Is Dynamic IP It enables disables being able to use dynamic IP Ensure it is a dynamic IP before enabling it The default setting is disabled Login Server IP lt sets the IP address used by the DynaNet login server Login Server Port It sets the port used by the DynaNet login server The default is 2268 Machine Name It
40. A Schedule Suspend When this happens click the Resume button in the Schedule options to restart the schedule The schedule will not continue until the Resume button is pressed AP3 is restarted or the computer is restarted Outside Power Off Enable Once this function is enabled the display can be shut down by hardware of software This setting is disabled by default Copyright 2008 DynaScan Technology Corp 79 Brightness Some DynaScan displays DS0706 DS0716 DS1016 DS1713 DS1713 3 and DS3522 support the ability to control the brightness Different models have different dimming levels 100 represents the brightest level when the percentage is lowered the brightness is lowered as well Note This action will cause the Monitor System Schedule to be paused until it is released or AP3 is restarted Display State This area displays information on the current state of the display The fields are Power Started Motor Started Motor Alarm Tilt Alarm Thermal Alarm AC DC1 Alarm AC DC2 Alarm AC DC3 Alarm Preheat Precool Excool and Thermal Warning The AC DC field varies depending on the model used The color code is explained below Drake Sii MOH A Slobai 00200 A a CHRON Si Le Thermal Alarm CA A A ill a Londibon r Sate EMm HAZ CEJ E Ee pExt Ext2 ext inti int int int Represented Dark j Green Wine Grey Yellow Orange status Green Power Not Enable Disable Started de
41. DynaScan AP3 Software User s Manual 360 LED Video Display Edition 6 Table of Contents 1 INTRODUCTION sima e A A A 5 2 INSTALLATION uu ccccceccecceeccescnecceecneeeeseueeeuseueeeuseueeeuseuscueeeeseueeeuseuseuuseueeeuseuseueseueeeuueuseeuseueneuseuseeaseueeeuusueeceseueneusenens 6 3 VERSION asi ia 8 4 START PROGRAM SA 8 5 EOIN ciar iia 9 MAIN MENU CONFIGURATION AND FUNCTION BUTTONS 2ccecceceeceeceececeeceeceeaecaeceecueaecaeceseeaecaeceesesaeseesueaeeueaeeeeneseeaes 9 5 1 Player 2 PP e A PB UU REC a e PP O E CO 5 A 12 Li Sn A ne ee ee en ee 12 e TE E A EE E E remade AE AT 12 SEL MA ns 14 A eee a er ee ee eee ee eee 18 o An 21 SA POwer PON eeinetan eE o E RR PAR PO EP E OS E ECO o 23 A E o et ee ene eee ee 25 DO DIBE Poo pace csc sans ec tee ese E E oidor E E 26 e TUL ii sana 28 a 29 S19 Additonal MONA OM tenio dotado oi ri cocino sport seis 30 5 2 Layout E 5 E anaes nsesenee see uceeo aaeceseeseaecseasece 32 lis o An A 32 COmiqure lavo bailaora E A E E E 32 o oO oea a nn A PP E PO AA 34 creating a New Lado Eso ern eee peter dsc meee cen ee er irte 34 5 3 Sequence S P E EE o po LO A A EE E An 39 PP A 39 So po UE oO PP e O A 39 1 e A 41 Ada 216 ee gre ia gt Fo 16 B ere mee ena nen te era east for Diner E ene ne ee eee 41 5 4 Schedule E a aa 49 A a uo A 49 COmidure la QUE sintesis idiota A todoo eae eer ee 49 0114 VOU AM e E e A 51 Ao ASAS o ee ee eee ere S 59 i
42. DynaScan Technology Corp 23 Note on Power Point File Playback PowerPoint Viewer 97 is required to play Power Point files Because the aspect ratio of a Power Point file cannot be altered the resolution of the Power Point file resolution must match the native resolution of the display When producing Power Point files users should refer to Appendix DynaScan Models Resolution List for size considerations in order to achieve the best playback result Page 158 Copyright 2008 DynaScan Technology Corp 24 5 1 5 Web Page Flay Contol SBS EOUGa AA PF Mo aFde Cattue Flach Peer Piet Wars DET Pere Horda ALIADO Wied TOS AM Content Enter the destination URL of website e g http www dynsacanusa com Screen Scope Input number of pixels and press Enter key to change scope Top Moves screen upward Left Moves screen leftward Bottom Moves screen downward Right Moves screen rightward Accelerator Select the video hardware accelerator used to play content When selecting Default AP3 will default to the accelerator setting in the Options If an accelerator is specified only the current content will adopt the accelerator setting and no other content will be affected nor will the accelerator setting be changed in Options For more information about accelerators please see page 30 Copyright 2008 DynaScan Technology Corp 25 5 1 6 DVB T Flay Cicmfec 8B EO Ra AA F Mef
43. F be FT Hari peca Patio Harare able Cok fo 1 F eray ge le de Fi y Coral Parra Hy Deui E Pad cere a bip Dinero rre e Biy Het Piotr i i EEEE ee CO Wied A Start End Time After choosing a video file pull Current Time Indicator CT under preview mode to desired start point of file Click lt lt button beside Start Time to set up start point then pull the CTI to desired end point of file and Click 2 button beside End Time to set up end point The blue range in Track bar represents the played scope of selected file Once pressing La Play played content will start from and end at set points If Preview has been selected the specified time layout will be previewed in the Preview window Note End Time setting must be later than Start Time If detecting incorrect time settings AP3 will automatically play the full file Copyright 2008 DynaScan Technology Corp 14 eb SOR w EE Heka Fie tacts Fiech Pas Pert eh Plage DB Pose Horda foment oer Shar Tims Ae rane i sa eee pool Falo 360 2350 Di ital Madi COQ inom we 9 Volume Balance Moving Volume Control slider will adjust the audio level of played content Slide it the left to reduce the volume and right to increase Centering the balance slider will produce even output in left and right audio channels Moving the slider to left will reduce output from right sound channel and to right will reduce output from
44. Lorin Rescue Borra Tea Paten Cara rra Eos Pies Send cep era I OTETTA AU Wel 1 8 AA Use auto alarm e mail It enables disables the auto alarm E mail feunction By default this is disabled SMTP Setting These are the SMTP Simple Mail Transfer Protocol settings Mail Server It sets the host name or IP address used by the mail server Server Port It sets the port used by the mail server Use authentication to log in to this server It sets the User name and Password to login to the mail server User name It sets the user name for logging into the mail server Password It sets the password for logging into the mail server Use SSL It sets up the SSL Secure Socket Layer function SSL Method It sets up the SSL method From email address It sets the e mail address of the sender Copyright 2008 DynaScan Technology Corp 109 Send email to It sets the e mail address of the receiver Send test email lt sends out an E mail to the receiver s e mail address to test if the settings are correct Save lt saves the settings Restore lt restores all of the settings to the last saved setting Copyright 2008 DynaScan Technology Corp 110 5 7 11 Power Control This option provides three functions Shut Down Reboot and Restart Click the button to enable AP3 to execute the corresponding function Shut Down Shuts down the computer similar to shutdown function of the operating system Reboot Restart
45. Marquees AP3 allows multiple marquees to be shown simultaneously on screen When creating a new marquee the default position may cause the new marquee to overlap a previously created marquee If a marquee has been covered the Offset Position should be changed to adjust the display position of concealed marquee to make it visible Copyright 2008 DynaScan Technology Corp eeses s lt i sSsSsSsSS a 5 Tip for detail adjustment Marquee parameter settings provide several sliders for adjusting different aspects of the marquee Dragging the slider may generate a slight difference from the desired position The user can left click the slider and then use the arrow keys on the keyboard for a more detailed adjustment LightNum Plugin LightNum Parameter Settings AP Flogin Humber set Font Back Color Position C Left Up C Right Up Left Down C Right Down Event Char tr C Q C A B Name LightNun Target Window Panel Input Show Text TEAT Port To select the communication port connected with announcer system If an incorrect port is appointed communication will be disabled Position To appoint display position with default at upper left part of the screen User can set other positions for display such as lower left upper right and lower right area Event Char Because of announcer two modes C Q amp A B are used to determine the key words in front of and behind the number which should se
46. Not available after pressing Modify key 6 y te Label 5 Applies current modifications to play item After t making changes you must click Modify button to 7 Advance Copyright 2008 DynaScan Technology Corp complete modification Label 6 Removing selected play item s from play list Label 7 Advance setup adjusts advanced parameter settings for play items and also provides preview function Tip Setting up several items at once To set up multiple play items at once hold the Shift or Control key while clicking on all the play items in the sequence you wish to modify Second set a play time that will apply to all selected play items Finally click Modify button to apply play time to all selected play items If all selected play items are Media Files you may use this method to select or deselect the One Time setting for multiple play items Advance Setup of Play Item Click Advance button in editing section to set up special parameters for a play item All modifications made in Advance will be applied to play items without the need to press the Modify button Continuous Play Items will switch to a window similar to the AP3 preview player without options of play type and play mode After setup click OK complete setup or Cancel cancel setup to complete operation Other parameter operate the same as preview player Page 14 Advance settings for Marquee selection Marquee Set Da
47. OS Rw ee hy Meda Fils Copan Fach Pome font WebPage BT Fumme Monia 0 01 A eo an ea if pry Fie Hw Hm e ol E mo Oe SO Wed Ct AM a Copyright 2008 DynaScan Technology Corp 17 5 1 2 Capture PT Pl Caan SRS EO oH wa KEFF Mea Fe sra Flach Por Pt web Page DB T Pett Tiha Vedios Inga Ds Ano Porra leas d casa Dad Hana apro Fab Reiolutor Died aul Crevice i ia PO el a Estan A Weed TOA AA TV Channel Input code of desired TV channel and Tuner should be set up prior to Video Input Then press Enter in keyboard to complete TV channel appointment Video Input Select input terminal based on different video sources including three types as Composite AV S Video and Tuner Default value is determined by Capture settings in Options Video Format Select input video format Currently RGB format is supported but YUV is not If Default value is selected Capture settings in Options will be automatically adopted Analog Format Set up analog video format based on location Three main specifications of TV video transmission consist of NTSC PAL and SECAM NTSC 30 frames per second displaying 525 scan lines adopted in U S A Canada Japan Taiwan and parts of Central and South America PAL 25 frames per second displaying 625 scan lines adopted in UK Copyright 2008 DynaScan Technology Corp 18 Germany most European countr
48. Operation Interface When the icon is in the lower right corner of screen of the operating system it means File Transmit Server is already activated Click the right mouse button to show the option when the cursor moves over the icon Select FSServer to open the program and click Exit to close the program Note This program only supports the AP3 Server version Exit heroes Command The users can view the machine publishing the command the machine receiving the command and command included in the page The users can also cancel stop or deletion the command Fide Teememad Servi Commard Publish FOT FOT Manager Machines Correciora Dese Delete Carcel Pace Contras F Ju Show Tranmiting Command F Ehow bietal a CC od TA E Rata Tee SENATE oo ar oe pan Complete Time 2007 07 11 00 H a PAN 1 E i ifthe a 5 paar Ai i Tact q AAA COPE 0O E CODO Clert Doa DD i Chore Time OTTA 11 10 FONDO za s Tce 1 i Eh LH Piedad pel mps 1 EB else ft E Demo reg 1431515 EE 3 Urejen Machine Get Time Compite Tano Dara Tag State Pegen 1 Chet FAS TASA MVPS Final 100 50 2 lea Fl Ci Pra Piera PPP Dra l e te A A E AL h FL CAP Porc AP MPT OA rr PLL Fi A Teme ah Proa Pilea Dynan BPS Cara T Serer A FO Pat 075 hon a Ci A Deen A PT Ope Tree ei hi Figgis Path E Pirro Filed prat PT hl TS ere uta oe Tuacbrc Speed Up Chie Down Ohba 5 Delete This de
49. Schedule Ter MNAE Sunday F WA lf the time in the above two examples does not overlap for instance the time of Achanges to Sunday at 2am to 8am both A and B will be active Some Action Types like Power Control and Brightness have no priority issue Priority judgment only takes place when the start time of Brightness or Spin Speed s start time is available is exactly the same Power On Failed MJ When the scheduled Power Control sends out the Power On message to the display and the device reports that the status does not fit in the schedule a power error will be shown in the status area n om it mtd DH Copyright 2008 DynaScan Technology Corp 92 5 7 4 4 Event Log This operation will create a system log for professionals to help tourbleshoot hp tice F m EJ PEPE A E e ee Sag Seine CestteLvertteg _ Caw Log stent T Hide inde T Hide waming Mara Hurn E Display Pest O Des Mirto Ty ten inca AAA o Los Cia AE sont Leg indoor ne SMTP Sone Persa Lori Meene Monica Tet Paren deco AUS UA rd 10 01 40 AM Disable Event Log If the function is disabled checked event log will not be recorded and log display does not update any more Default is set to C disabled Clear Log This will delete all the information in the event log Once the event log is cleared it cannot be restored Load Log File This will save log files Restore This will restore the log files tha
50. a tee Pase Vale Loria Laia Ara Hara ere Corera SHIP Senin Persa Lori Meene Hori Tet Faren hl AN AAA ed Ce A List Capture Device Click this button to list all the capture devices available ID The device serial number 00 acts as the default capture device IS Internal Sound The audio source can be outputted to sound card internally though this is not necessarily for external audio source connections Only capture device that support this function can be selected AD AVI Decompressor This function will add the Filter of AVI Decompressor automatically Users can sometimes use this function to help playback problems RC Render Capture This function specifies that the Capture Device is in Preview or Capture Pin Users can sometimes use this function to help playback problems DI De Interlace This funtion will automatically add the De Interlace filter This function is to help enhance the definition however it is not valid to all devices CS Color Space Convert This funtion will automatically add the Color Space Converter Users can sometimes use this function to help playback problems Copyright O 2008 DynaScan Technology Corp 100 Volume This is for volume control Name This is the name of the capture device TID Tuner ID Identification number of the Tuner Do not change this setting CID Crossbar ID Identification number of the Crossbar Do not change this setting
51. ack for about 6 minutes It will power off the display automatically and the content will stop Certain models only Thermal Warning Copyright 2008 DynaScan Technology Corp 81 If the drum temperature is above 50 C but less than 60 C Thermal Warning will be activated This will cause the display s brightness to be reduced by 50 of the highest brightness It will be deactivated after the temperature is below 45 C Currently only for model DS1016 Note If the brightness is already less then 50 of the highest brightness no change will occur Air Conditioner State This field show the current state of the Air Conditioning Green is for no detected problems Red is for a dectected problem and Grey is for no detection at all MCB A Status The function is disabled MCB B Status The function is disabled DVI Status The function is disabled Encoder Status The function is disabled If detecting any incorrect information in monitoring panel please contact DynaScan agents or engineering department Copyright 2008 DynaScan Technology Corp 82 5 7 4 2 Functions of Advance Control Panel m ihan b Tre Be e mP a Mosatos System Adhere ups Postear Mordor Exa ma chale Evert Lag EC Crisi Hal Path Late Eat Vale Cona Codos Adn har ar Drrera SHIP Sor Por Gorni Haces Minera rea incomes 7 i A A A ee Posa Dn Sate Tee tee fo g o J My Wed A Temperature Number of temper
52. age via the Capture Card corresponding to the ID Please refer to Capture Direction in Option for ID setup approach Page 100 Note Selecting Device ID will turn the settings into default Set to Default The settings will be set as the Capture Setting of Option for default after the button pressed with the success message shown to the right The settings of Volume Balance Accelerator and Maintain Aspect Ratio will not be set as default Copyright 2008 DynaScan Technology Corp 20 5 1 3 Flash Flaw Conteol 8B EO Rw AA F Moda Ple Capture Pusan Por Port Wb Page DB T Cont Top a o La Bae 0 0t i i s Right 0 Content EIA Wied 10 0 AM Click to open the file browser window and select the desired Flash file for playback Screen Scope Input number of pixels and press Enter key to change scope Top Moves screen upward Left Moves screen leftward Bottom Moves screen downward Right Moves screen rightward Accelerator Select the video hardware accelerator used to play content When selecting Default AP3 will default to the accelerator setting in the Options If an accelerator is specified only the current content will adopt the accelerator setting and no other content will be affected nor will the accelerator setting be changed in Options For more information about accelerators please see page 30 Copyright 2008 DynaScan Technology
53. ar the belated command 2 Command List State There are five states these consist of Downloading Completed Done Failed and Belated Main File The transfer file may be Sequence or Schedule for better performance This area only shows the main file Copyright 2008 DynaScan Technology Corp 127 Time It shows the performing deadline of the file The command regarded as belated command beyond the perfomed deadline Key The checking base is for performing the command 3 Command Description List state The transfer state of the file currently includes Empty Transmit Complete and Final Filename The name of the file Local Filename The file name that is included in the local directory Machine List Clicking the Machine List button will show the machine list window users can view related information about other Client terminal in this list l Mechine Lia Pa Te iP o E 192 160 1 101 076 1321601102 076 Name The representative name of machine IP IP address of the machine Port The used Port of machine Type The type of machine Copyright O 2008 DynaScan Technology Corp 128 Option Setting Option Setting J Local IF 127 0 0 1 Network Speed A L Local Port 8766 Download 104400 KBits Per Second Upload 1102400 KBite Per Second Use Virtual Server Iw 2 Virtual Server IP 1192 168 0 99 Content Path D Virtual Server Pork 11234 le Path D Content a coes 3 Use Dynamic IF E
54. arameters etc Label 6 Timetable shows a visual representation of the schedule Label 7 To set background sequence that will automatically play during times when content has not been scheduled to play Function Buttons Extended function section O tel H a amp ad a O New Creates a new play list for Scheduled Play fea Open Open a previously saved Schedule File with sch as filename extension El Save Saves changes to current Schedule E Save as Saves current Schedule as a new Schedule file sch Export csv Exports information from current play list to an Excel file al Path Open Path window to load content files from another directory Copyright O 2008 DynaScan Technology Corp 50 gt Play Play content immediately according to the schedule settings in the current play list kd Set Startup Run Sets schedule as default startup play item The system will confirm if the schedule in editing section needs to be saved Bel Background The function is disabled al Publish Exports the Sequence and all the video content files in the current playlist to a CF Card SD Card USB Drive etc After inserting media into another computer files may be played directly once AP3 has completed media path setup Remote Publish Transmit the current play list including all the content files belonging to the list to the remote target computers via internet The content will au
55. ases Only available on DynasScan display DS1016 Copyright 2008 DynaScan Technology Corp 86 5 7 4 3 Monitor System Schedule This option enables the users to edit the schedule of the display for Power on off Brightness settings and Screen spin speed all independently T Option Dpr a Hp LA ar 0D lirio irira lara VELO TN kapire iret las OY DEF Pee Lori ra CE 50 00 Hesse Hiriy Tea Fate Pa ASA Wied 100 01 40 AM Disable Schedule lt enables or disables the schedule function Resume lt resumes the schedule in use It is disabled in general Once users selected specific operations in the Operator options Schedule will be suspend automatically This button is enabled and needs to be clicked to reactive the schedule Save lt will save any of the Schedule changes A modified schedule needs to be saved for it to work properly Append lt adds a new Action An Append Dialog box will appear when clicked The new action will be added to the top of the list Copyright 2008 DynaScan Technology Corp 87 Modify It modifies the selected Action A Modify Dialog will appear when clicked Delete It deletes the selected Action Append Modify Dialog schedule Setting Action Start Time Power Control Type Everyday C Brightness Date C Spin Speed Time 14 14 00 Duration 16 10 00 End Time 230000 Action Here the user selects the action to be executed There are three types of Ac
56. atio box Because the aspect ratio of the content may differ from the view window black margins around picture may appear Creating a Setting File for the Channel Use Windows NotePad you may create a settings file as shown below Save it and change filename suffixed with dvt as the extension P DYBT AR aTyavt L E BRDO FEO ELO WAT HAH Example Direct Explanation DVBT BDA Type 6 Bandwidth 545000 Frequency 8350 ONID 26 TSID 203 SID Copyright 2008 DynaScan Technology Corp 27 5 1 7 Picture PC PT A Sw e PF MefaFe Carra Flach Pres Puri Web Page DET Gots Horda Cortar _ Acces Ded at Bieter iie Rabo a EEE EEEE SEEE E h I Iim IT 4 m i E 1000000 000 000 Cardo J i ALIADO wd 10 AM Content Click to open the file browser window and select picture file you wish to play The software currently supports BMP and JPG formats Accelerator Select the video hardware accelerator used to play content When selecting Default AP3 will default to the accelerator setting in the Options If an accelerator is specified only the current content will adopt the accelerator setting and no other content will be affected nor will the accelerator setting be changed in Options Maintain Aspect Ratio By default the picture will stretch video content to fit the size of the view window As a result of different aspect ratio of original file the image may be distorted To
57. ation Copyright 2008 DynaScan Technology Corp eeses lt i s sSS 52 Start Time Displays date and time when item will play Full Date Content will play on a specific date e g Jan 1 2000 Date of Year Content will play on a specific day of the year every year e g Jan 7 Date of Month Content will play on a specific day of the month e g every 1 day in the month Day of the Week Content will play on specific days of a week e g Tuesday Wednesday and Thursday Everyday Content will play everyday Format of date YYYY MM DD Full date of play operation MM DD To play on the date of year DD To play on date of month Weekday To play on day of the week S 123456 To play on day of the week Everyday Daily Play Time pattern is as hh mm ss If hh is displayed as mm ss the setting requires hourly playing To modify Start Time first select modified play item then select type of start date in editing section and appoint start date because different date type enables different date content Next tick the option Every Hour based on needs before selecting start time Hour Minute Second If Every Hour is ticked only Minute Second need to be input and click Modify button to change start time and complete setup operation Play Time Display pattern is Hour Minute Second One Time play may only be selected for Media Files and playtime will equal the file leng
58. attern 3 Default Pattern 4 Default Pattern 5 Default Pattern 6 Creating a New Layout Establish Modify and Delete View Label 4 Mery Delete Clear Sound o efault Views Region Using a premade layout template is not necessary to create a new layout Click button New Bl in extended function section and a new layout not view will show in editing section Then Click the New button on the left hand side of the screen to insert a View that can be moved withing the layout and its size changed by using eight red points along the edges The position and size of view may also be directly set up by inputting number in the Region area of the View Settings To delete a View click the view you wish to delete and Click Delete button on the left side of the screen New to generate a new view in editing section Delete removes the selected view Set Sound View Clear Sound Selects the view that will be the audio source for the layout or may be used to remove audio from a view Note Flash and Power Point files will always produce audio even if the view s audio has not been selected Undo Returns to previous status from current editing condition and cancel current change Redo is available up to five previous changes Redo Restore later status under current editing condition via retrieving cancelled changes Copyright O 2008 DynaScan Technology Corp 34 View Setting Label 5 A egion Set
59. ature fields varies for different models The temperature field option can be changed if the model has more than on temperature sensor and allows multiple fields Temperature Environment Drum This is located at the bottom in the drum in the display For all models Base This is located in the power control chamber of the display For some models Environment This is located in the base of the display to detect the environment temperature For some models Copyright 2008 DynaScan Technology Corp 83 Active Virtual Encoder This feature is used to replace the hardware encoder with a software encoder This tool is made to be used only by technicians Active Virtual Encoder All Off All On This function allows all of the LED Modules to be turned on off all at once Note This feature is only available on some models All OF All On LED Scan This function is used to select how long to turn the individual LED Module on off in sequence The editable fields allow options from 1 10 seconds Click the Scan toggle button to start the operation and click the Stop button to stop click the Pause button to pause the operation and click it again to continue the operation All the LED Moduls will turn on after the Scan button is pressed The sequence will turn on all of the LED Modules one at a time and then turn off all the LED Modules one at a time This process will repeat until the St
60. both play for 3 minutes End Time will display the power off time computed by Start Time and Duration Brightness It displays the Brightness Level options Different display has different brightness levels in this selection The Level options will be disabled if the display is unable to adjust the brightness Spin Speed It displays Speed options The Append Modify button at the lower left corner will save the changes Click X at the upper right to the abort editing Test Click Test to open the test dialog Input the date and time to check the action in use and the next action to be used When Schedule edititing is finished the Test function can be used to test the Schedule before saving Click Save if the test result is correct Click Test will show the following Dialog Schedule Test 008 De 26 Tuesday 09 20 11 Power Control Last Action First specify the test date and time then select the Action Type for the test Click Next Action and the test results will appear in the column on the right Under the specified conditions the Schedule lists the time and action to be executed next time As the figure shows above the specified test date is 2008 02 26 Tuesday the test time is 09 20 11and the test action type is Power Control Click Next Action and the test will run Set Power Off at 2008 02 27 Wednedsay 04 00 00 after previous test is executed Copyright
61. by right clicking it to bring up modification window with Setup Enable Disable and Delete functions Parameter Setup Click Setup to open parameter setup window Please refer to following illustrations of marquee plugin and LightNum plugin for usage of setup window Disable amp Enable Plugin The function is the same State enabling and disabling plugin Delete Plugin Deletes the plugin from the list If a file is played before adjusting plugin please click Stop All to stop all play action for following adjustment Please Restart AP3 after plugin adjustment if player is Embedded IPC or changes will not be saved Marquee setup Marquee Parameter Setup AP Marquee Plugin Positon i l e Up oo Sore Left Right Bland Riad Set Font C Down Speed 20 pps TextH 20 pixel space 100 pixel Back Color I I a ee i Offset Positon 1 Offset Left or Top i Target Window Default Offset Right or Bottom Ss Remote Comm Back Image Message DynaScan Dynas3can Dynas3can Dynas Ca Position display position Sets position of marquee in the target window Speed moving speed Set scrolling speed of marquee information The Copyright O 2008 DynaScan Technology Corp 64 larger the number the higher the speed Space information interval Interval length between two paragraphs of information The smaller the number the narrower the interval Offset Position change di
62. c AA HC Corts este Publish Content Path Cortar ETS Chart Pot 8765 F reaal el ECU Ped EH Sem N20 herm Pat B767 Dyrnar 16 FOE Pav E i ls ye F B Lagaar r Leagan arene Port ISE hiatos Hre Mh Eiir Adip Fried J zj lt lt i ee O zj IIA wd 10 00 AM 5 7 10 1 General Network Control Enable lt enables or disables the network control function The default is set to enable If disabled the network control functions will be unusable Listen Port Remote State This port needs to be connected to grant viewable remote access to the state of the player The default is 2266 ECU Function This is the communication port for the ECU function The default is 2267 Remote Publish The function sets the DSPlayer to execute remote publish and connects to the server for file transfers It also sets up the Client connection for executing file reception and file transfer Client IP It sets the IP address used by Client for file transfer The default is 127 0 0 1 Copyright 2008 DynaScan Technology Corp 106 Client Port It sets the port used by Client for file transfers The default is 8766 Server IP lt sets the IP address used by the Server for file transfers The is default is 127 0 0 1 Server Port It sets the port used by the Server for file transfers The default is 8767 FDT Port It sets the port to be used by the FTP The default is 8
63. cified View Input the name of the View in Frame Name by dragging Frame from Type e g default Views as Default Region1 and Region2 etc This Publish will play in the specified View and not affect the playing in other Views When the playing client is displaying multiple screens the user can specify which screen to deliver the content to using the Screen ID You may preset the date and time to begin playing the published content The View will not play the new content until the preset playing time If a future play time has not been specified content will play immediately after remote publish has finished transferring Click OK to begin transmitting Note Applies to AP3 Server only Machine Select aaa 192168 1 1 576b6 Type e bbb 192 168 1 2 8766 an O Local 127 0 0 1 0768 Client 10 271 31 8766 Frame Mame jan Begin Play Time 2007 2213 hal EF 03 00 00 Select All Clear Select Appoint only view with sound lf a view has not been assigned as the single audio source of a layout all views may play audio simultaneously To avoid this select the view and click Set Sound button to set as the only audio source and mute all other views Two sources with the same Capture devices cannot be played simultaneous Copyright 2008 DynaScan Technology Corp 37 AP3 supports the use of multiple capture cards and is capable of simultaneously playing multiple images and sound sources from
64. ck 7 to drop down the list of all registered servers After selecting the server a FDT connection with the server will occur 2 Stop Clicking the Stop button will stop the current FDT connection with the server 3 amp 7 Choose Drive Click 1 to drop down a list for choosing another drive Note The functions on right side of the page and can be run after connecting to the remote server 4 amp 8 Path Display Display the current path in the field New Folder Clicking al will create a new folder under the current path Delete Clicking X will delete the selected file or folder in the file list area 5 Note Clicking Xl of right area at page will delete the selected file or folder area 9 Up Folder Clicking uP will move the current path up one level Refresh Clicking will refresh the display in file list Upload Clicking will upload the selected file in the file list from the Local server to the Remote server The other method for FDT uploading is to drag the selected file from the file list of Local server to the file list of the Remote server You can also drag or send multiple files at the same time Note Clicking lt DownLoad of right block in area 9 is for transfering items from the Remote server to the Local server 5 amp 9 File List The two areas display all the files and folders located in the Copyright 2008 DynaScan Technology Corp 137 current path 6 amp 10 Drive Free Space
65. connecting to ECU and APS or File Transmit Client LCM Sim It opens the operation interface of the LCM simulator XNOTE Please see Embedded IPC Operation Manual for details on the LCM operation Use Soft Watchdog When enabled the soft Watchdog function will monitor the operation of AP3 DSPlayer and File Transmit Client When one of the programs stops responsding for 5 minutes Watchdog will reset the computer to resolve the problem The default is enabled Auto Run It enables ECU to automatically start running when the computer starts up The default is enabled Use XP Firewall lt automatically enables the XP firewall The default enabled Copyright 2008 DynaScan Technology Corp 146 6 7 Message Editor Functions The user can edit text in the marquee message editor as well as appoint text color insert and play pictures in front of text and the like Configure layout Meira los LO MEW ad E E AN beet olor d A ope Double click here io marar mea DD raei Time Cot GIES 2008 Fri 1001 29 AM Label 1 Function button section New This will clear all marquee messages in the edit section for a new message Open This will load save files Save This will save the current message Save As This will save the current message to a new file Delete To delete selected marquee from message edit section Clear Image To clear the selected marquee image from the message edit section Label 2 Message edit sectio
66. d Display Position in left setup subject section Each represent an independent screen for play content respectively The user should click screens represented by sub options for corresponding setup Staup Soling WEI ML Frama Bra Paso a pr libro Merce rar Except If G00 SA joao Bro latido Fated A o MALO Wed Le A With multi screen selected the right combo box illustrated below becomes multi screen with 3 options of MS1 Default MS2 Default and MS3 Default MS1 represents play content of Screen1 MS2 represents Screen2 etc Copyright 2008 DynaScan Technology Corp 69 Auto Startup Select this setting to automatically run AP3 when starting computer By default this setting is disabled C VMR9_ RL Frame Reversal If display equipment is installed upside down the user can enable the setting to properly display content Only VMR9Q RL CLONE and CLONE3 accelerators support this mode and should be setup as the accelerator while enabling the function By default this setting is disabled Power Point Offset Enable If the screen displays a scroll bar you can enable this setting to move the scroll bar out of the screen lt is not necessary to enable this setting if no scroll bar is displayed By default this setting is disabled C Billing Record Enable lf the user requires actual play progress of content or billing record as receipt the function should be enabled to record play progress after sta
67. ds for Flash and PowerPoint files when adding to a play list AP3 cannot acquire actual time length for these types of files therefore the play time must be specified by the user Copyright O 2008 DynaScan Technology Corp 48 5 4 Schedule B Introduction The Schedule Editor is used to create a play schedule of several content or sequence files that will play at predetermined times You may also set a sequence to run as a background item that will automatically play during times when content has not been scheduled to play Configure layout 120 ml ml ol a a a aa ist Tmas i aii nT puat PORTE TS Te Tare IE TW ITIFTR IA WT Wee A Tha A Gee LR Sen LO Hon AO Te IA at f H m S S Recto TE E Pura Capi Tee rare Ture Cars Tur Lap Tira Lars Tun r cla i ca calas ai Sp oo ad in id eme ea 13 Mai Tura apn dure aire Tura Capiro Tires Capture Ture tee Tren Eare Fun Ee Clau Mw AM Label 1 Extended function section Label 2 List of play item types Currently 10 play item types are supported Media File Capture Flash Power Point Web Page Satellite Picture Plugin and Layout Label 3 List of playable files of selected play type in the Default directory set in Option Click to select a file or select several files by pressing Shift or Cirl while clicking and drag it to Play List to add item Label 4 Play List co
68. e directory and No to return back to modify the directory Copyright 2008 DynaScan Technology Corp 156 setup 2 01 2 The specified directory does not exist Do you went to create it 4 Select program folder Default folder is DynaScan Decoder Renaming is not recommended click Next Scheel Pringi Folder Se pall aad program icons be the Program Folder iiei bok Yau FHRA le Gra loba Fae op sede pre Hs hes Ext Fakher ll Dick Het do contre hea il pou mand lo deter of chango any retinas deck Bach F pea aoe cotton ts thee cele ld Med Iri Den copar the 6 Click Next to complete installation setup Complete s Sao hat baahed mabir Dena can Decoder i pour GkWare cumple Copyright 2008 DynaScan Technology Corp 157 Appendix DynaScan Models Resolution List Model psozos psosos psss22 DS35220 DS0G16 Display Height OSOSIGA DS0612 DS0619 _DS1506 Display Width 960 s2 744 064 sea Display Height Model bszow23 ostia Dsii33 psoe DSt016 Display Height 480 soo 6o 7e 7e Copyright 2008 DynaScan Technology Corp 158
69. e activated The detailed file information of selected commands in the command list will be shown in this area 1 Command List The list will show basic information of all commands All commands include Done Transmitting untransmit and Invalid When the function Just Show Transmitting Command is activated the transmitting command will only be shown The colors show the command s current transmitting state Black The command is already completed Red The command is transmitting or untransmitting Gray The command has an invalid state List contents are as follows Copyright 2008 DynaScan Technology Corp 132 Index Number Filename The name of the command Publish Time The publish time of the command Done Time The done time of the command State The current command transmitting state The state includes Publish Complete Pause Pausing Paused Continue Continuing Cancel Cancelling Canceled Done Error Loss File Belated and Client Error Progress The current transmitting progress of the command File Num The file number included in the command Target Num The target number of the received command 2 Machine List for Transmitting Command The machine list will show all machines transmitting the command after selecting command from the command list The colors show the current command transmitting state of the machine Black The machine has already completed the command Red The machine is transmitting the command
70. e edited Copyright 2008 DynaScan Technology Corp 139 IP Address It sets the IP address of the machine being used MPT Port It sets the Port of the machine being used in the multiple point transmit protocol FDT Port lt sets the the Port of machine being used in the single point transmit protocol MAC It inputs the network card s physical address of the machine Note This field is currently not in use Description This will show the description of the machine Upload This will enable disable the upload feature The default is enabled Modify Modifies the settings of the machine Remove Removes the selected machine from the machine list Auto Check Enables automatic checking of the connection status between the Server and the media playing devices The symbol X means that this machine does not connect with Server the reasons may be the machine has shut down or is not connected to the network The symbol O means this machine is connected to the Server The symbol means the Server is trying to connect with the machine but is unable to The symbol N means the machine is not set up on this Server Remote Function The following window will be displayed when the Server is trying to establish a connection with the selected device Remote Function The following window will be displayed when the connection between the Server and the selected device has been established The status has two states Normal and
71. e layout Without appoint it may be To be efficient during play a special compressing method is used by the billing records to record information featured as fast and space saving Therefore a complex unscramble program is required to read records and the quantity of unscrambled material is much larger than Copyright O 2008 DynaScan Technology Corp 153 compressed originals If one query involves too many materials the operation may last rather long and use a large size of resources Therefore users are recommended to set the time layout in the billing record query and only check necessary materials Select play equipment select the equipment target from the Machine List in the query If only a set of information related to the play equipment exists in the directory of billing records the Machine List will display Local Select Image Select the played image from Identify List that contains the names of played images and two special options as follows All To show billing records of all played image Unknow To show billing records of unknown images Select Query Content List of Played Content All names of play content will be shown in the content list after the Query button pressed providing the options Single Content Multiple Contents or All Contents Click Single Content option to turn it blue and click Detail to check records of the play content or directly double click the option Ctrl
72. e play progress accordingly To the right of buttons is relevant information column of files The left time displays the current played time and the right number represents total length of file This is followed by a display of the file name and current playing status The last drop down box lists all currently played files for users to select objects of operational function section as AP3 is capable of simultaneously playing different files in sub pictures with different sizes by dividing several displays or one display Label 3 operational area of each function Please refer to detailed introduction of functions for illustration of each item in operational area Label 4 Feedback of status of the DynaScan equipment This includes temperature sensor power status motor status thermal alarm tilt alarm preheat precool and excool e Temperature sensor will detect the temperature centigrade in the machine body displaying a green number EMB to represent normal temperature and a red number HM when the temperature exceeds safety settings e Power status displays D grey when power is off 6 green when power is on and unexpected power status 0 yellow for certain display Models e Motor status displays E grey when motor is off ES green when motor is on and red when motor is abnormal If an abnormal condition be detected the display will be shut down automatically e Thermal alarm will show IM red w
73. e slider to the right Copyright 2008 DynaScan Technology CA 19 Sharpness Change sharpness of the image The image may be blurred by moving the Slider to the left and sharpened by moving the slider to the right Accelerator Select the video hardware accelerator used to play content When selecting Default AP3 will default to the accelerator setting in the Options If an accelerator is specified only the current content will adopt the accelerator setting and no other content will be affected nor will the accelerator setting be changed in Options For more information about accelerators please see page 30 Maintain Aspect Ratio By default the picture will stretch video content to fit the size of the view window As a result of different aspect ratio of original file the image may be distorted To maintain the original aspect ratio check the Maintain aspect ratio box Because the aspect ratio of the content may differ from the view window black margins around picture may appear Resolution Default will use resolution set in Capture Setting of Options Only current Capture will used specified resolution setting No other content will be affected nor will the default resolution setting be changed in Options High resolution refers to 640x480 Low resolution refers to 320x240 Auto function is disabled Device ID AP3 supports Multiple Capture Cards that enables the user to appoint ID and input im
74. eduled Play If the Play All E checkbox is selected it may only be interrupted by Scheduled Play that has been designated with On time Play property O Once the interruption has completed AP3 will resume content according to the Resume setting If an interruption has not been allowed the Scheduled play item will start playing after completing the currently played content Notes for Layout Setup in Schedule The role of Layout is to change picture configuration If the object of layout setup refers to the display equipment executing the schedule schedule operation may cease and following items will not be played because the Copyright 2008 DynaScan Technology CA 6 view playing schedule is changed Therefore execution results may differ from expectation if above problem is not noticed in edition Four layout options are available Start Change Assign and Remove refer to General Setting of Play Item For instance Start will stop all operations in progress and should be avoided under the circumstance of maintaining schedule operation while changing the layout To confirm view name As layout change is identified via view name after setup new layout requires view with the same name to continuously execute the schedule Check view for play content In layout Startup Run should be set as None to save original content Even though the same content is appointed for play appointment itself will cause replay from the begi
75. efers to setup mode of layout including Start Change Assign and Remove Start Stops currently playing content and Starts play of new layout For instance while playing a Sequence or Schedule startup of appointed Layout will stop current play item and clear all contents scheduled behind the layout Change To change to a new Layout If scheduling function is available to Sequential play or Scheduled play in one view of Layout the position and size of the original view with the same name will be changed when using the Change function A new view name will be established if original layout does not contain the new view the existed view will be cleared if Its name is not found in new layout If a view with the same name in new layout has no appointed content originally played content will be maintained as well as current playing Status without interruption or replay If content is appointed the newly appointed content will be played Assign Adds view to Layout A view with the same name as Original one will have new position and size after change Copyright O 2008 DynaScan Technology CA 4 View name will be added to the Layout if it does not yet exist Does not remove other views Remove To remove a view from layout The function can remove file name and corresponding view without adding any new one Views with different names not be modified Time Display pattern is Hour Minute Second One Time p
76. ers sen Pos ESTI enon wie 1020 Not applicable to all conditions The ability to crop content will depend on accelerator setting and appointed playing screen Generally accelerators work when main screen serves as the main video playback screen If content is played on secondary or tertiary screens while using multi screen graphic cards VMR9 may not function properly Copyright 2008 DynaScan Technology Corp ees s lt i s sSS BL 5 2 Layout Ex Introduction The layout editor provides a way to divide the DynaScan display s play area into several sub areas each with its own picture position and played content Configure layout Layos Editor Wye AAA Fe Be ye A Bs ILO ES UW ees LE Default Pate Dell Pater felt Peet felt ten Cette Defeat Pate Detail Patani A E AM Label 1 Extended function section Label 2 Saved Layout Selection Area Label 3 Layout Editing Area Label 4 View Manager Label 5 View Settings Copyright O 2008 DynaScan Technology Corp 32 Function Buttons Label1 Extended function section M A p q O New Create a new blank layout El Save Saves changes to the current layout 1 Save as Saves current layout as a new layout file al Path Open a dialog box of directories to change the folder saving layout files in Layout Option gt Play Play content immediately based on layout configuration and settings in curre
77. ey to create multiple selections from the corresponding list and then drag them to desired position on the play list To adjust the sequence of play items first select the item s on the play list then click and drag it to the new position A blue separator bar appears while moving an item indicating the new position Copyright 2008 DynaScan Technology Corp 41 To revise content of play item first select the item from play list revise the information shown in editing section and then click Modify to save the new setting To revert back to the original setting click Restore To delete play item first select the item s from the play list then press the Delete key or click the Delete button in editing section General Setting of Play Item General information of a play item includes Type Specifies the file type of play item Cannot be modified Name Most names represent the file name of the play item with the exception of Capture Plugin and Layout All non file names will be labeled with on the playlist Capture name refers to video input from capture device including Default Composite S Video and Tuner If selecting Default video input will be determined by Capture Setting in Option Plugin name is determined by plugin device For instance marquee plugin will create option of Marquee Plugin Please refer to Plugin Function Management _ for details Page 63 Layout r
78. fect when making adjustment hp have TORR nR E EE Stud Sor J Taip fin Moere Syrto Dpat apip Moston SaiPa COM a r Haria Scher Anne Schedis ten Saeed fe fr virt Les Pecan RAP HE Cris Creda Pah Cel Apr Porra Mica Lit rs Ed Vial Grad Cuplay File Cora Adu Proton META oF ace ny y Thermal Warn Pascor Straten otar Tirate Molor Alarm Pitt Aban Thermal Alcira Ay CAE J Alami ACO E 2 Alnim ACO CJ AJ arm Hie Herir Lest Fan bool LTO Wed AM 5 7 4 1 Operator Serial Port The computer controls the display equipment via COM Port The Serial Port should be set as the corresponding RS 232 port connecting the computer to the DynaScan display How to disable built in monitoring system of AP3 Select Disable in Serial Port setup Select Model The default is set as Auto lf DynaScan display model has been set in Startup Setting AP3 will adopt corresponding protocol version Three protocol versions may be manually set Version 2 0 Version 3 01 and Version 2003 Please confirm the version can properly function to monitor the DynaScan display before manually setting to prevent selected version from causing a display failure or improper monitoring state AP3 will use the appropriate monitor application when the model has been set in Startup Setting The selected model will be reflected in the Select Copyright O 2008 DynaScan Technology Corp 77 Model drop dow
79. g all the content files belonging to the list to the remote target computers via internet The content will automatically play when publish finished AP3 Server only See Page 37 for more information Edit layout What is a Play Item Play Items involve all items contained in the playlist Each play item includes an action that refers to playing a media file or executing a marquee message and is determined by the Play Item type Sequences may be regarded as a collection of play items executing each item orderly Types of Play Items Continuous Play Items Media Files Capture Flash Power Point and Pictures file belong to continuous play items requiring a specified play length Th default play time of a Media File is the actual file length while the default play time of Capture Flash Power Point and Picture file is 30 seconds Triggerable Play Items Plugins and layouts are triggerable play items When establishing new triggerable play item a specified play time cannot be set This type of item activates a status change that continues until the occurrence of the next Status change For example a Plugin play item can change the status of a plugin device such as displaying a specified marquee while a Layout Play ltem can change the layout configuration of a DynaScan display such as adding additional views Add edit and Delete layout To establish a new play item first select play type and files click while pressing shift or Ctrl k
80. h FOr FOT Marae batrei Correcta Opto a 1 idi Fike Pameran File Di Upisi Command ie eee De eee Die ee ie Be a 2 a Egan Fie TEEF A MPT Ohana Tarrasa de Pu Pisa F kii ipae bri APRMPTE rra Farre oa ih E Prepa Pr PAP Oral Corre Viel fi dp ak Pit ara Files Da o an dP SMP Charme I Sener Flo porate AA EP Fi rea eT barre FT 5 hon rape tet Poh Programa Flare can APIAMPT Cherak T canada Taisit ised Wp Ch Dora U ba 1 Machine List It shows all the facilities that are registered in the Server The information includes name of facility IP address and ports used The user will be able to select a single or multiple machines and select the Copyright 2008 DynaScan Technology Corp eses i s sSsS 135 files to publish to the set of machines Press Ctrl or Shift on the keyboard then left click on the mouse to select multiple machines 2 File List Ready to Publish The list will show all files ready to publish Add File To add a file to the publish list click the Add File button to open the window to add a file Find the file then select the file and click the open buiton the file will then be added to the list Remove File Removes the selected file from the publish list OK To publish all the files in file list click the OK button to start transmitting Update Command The update option is for publishing in AP3 Click this button to open the window for opening files
81. he internet it shows the default IP address 192 168 1 101 Client Port It sets the port used by the client The default is 8766 FDT Port It sets the port used for the FDT service The default is 8768 server IP It sets the IP address of the server The defaut is 192 168 1 100 server Port It sets the port used by the server The default is 8765 Dynamic IP Setting This setting is required when the client IP address is dynamic The input IP Port and Name have to be the same as the settings on DynaNet server for proper login Use Dynamic IP It sets up a dynamic IP The default is disabled Copyright O 2008 DynaScan Technology Corp s i i lt SO I2 Login Server IP It sets the IP address used by the DynaNet login server Login Server Port It sets the port used by the DynaNet login server The default is 2268 Machine Name It sets the machine name on the DynaNet server Ethernet Adapter It sets up the MAC Address of the network card XNOTE The Dynamic IP function only applicable for DynaNet environment AP3 Auto Starup Run lt sets up APS to run automatically when the PC starts The default is Auto Run enabled Use XP Firewall It sets up the firewall built in by Windows XP The program will create the settings to work with the ports within XP firewall automatically when enabled The default is enabled Soft Watchdog It sets up the Watchdog software function When AP3 has no response or the system is down Watchd
82. hen detecting over temperature If it is higher than the safety setting the LED display modules will be turned off with the motor continuously running to cool machine Once the temperature returns to a normal level the LED display modules will turn on again e Tilt alarm will show M red and turn off the display when a tilt of the machine body over 15 degrees is detected e f the drum temperature is below 5 C when the DynaScan display starts it will enter into a Preheat mode showing Er yellow and motor turned off lt will then turn into normal mode after the drum temperature is above 5 C or after 8 minutes Only for certain display Copyright 2008 DynaScan Technology Car O models e lf the drum temperature is above 35 C when the DynaScan display starts it will turn into Precool mode with showing blue with motor running and the LED display modules off It will turn into normal mode after the drum temperature is below 35 C or after 5 minutes Only for certain display models e When shutting down DynaScan display power is on it will turn into Excool mode with showing Sl blue with the motor running and LED modules off for approximately 6 minutes It will then automatically power off the display automatically and the icon will disappear Only for certain display models Copyright O 2008 DynaScan Technology Corp 11 5 1 Player 2 Introduction The Player allows users to preview files before arrang
83. her parameters operate the same as preview player Page 14 360 Digital Media Cwi DE E 1 E 00007 40 00 15 Demo a it pa Pewee O MME 8 elope i ET l AMADOR Wed 10 20 40 AM Please refer to the chapter of Sequence for advance setup of Plugin Play Item and Layout Play Item Additional Explanation Can Play Item be interrupted Interruption will depend on the Play All E setting and On Time O of the play items Play priority is set as On time Play may interrupt Play All E which may interrupt normal Scheduled Play items Therefore the Play All setting can reject interruption request form general Scheduled Play and On time Play can interrupt Play All settings and normal Scheduled Play scheduled play items do not have resume settings that Sequential Play has After interruption restoration of the scheduled play is determined by selection of Play All E setting With Play All E selected play will resume from interrupted point and complete unfinished portion prolonging the end time of Copyright 2008 DynaScan Technology CAS the play item Without Play All E selected play will not resume from the interrupted point but resume playing content at the point in time the Schedule would have been if the interruption had not taken place Enable Multi Screen Function MultiScreen If MultiScreen is set as Screen Type in Option click to set the Sequence as Startup Run item AP3 will co
84. ication protocol of Monitor System Currently supported models consist of DS0616 series DS0613 series DS0612 DS0716 DS0808 DS1016 DS1508 DS1713 DS1713 3 DS2012 DS2012 3 DS3522 series DS0706 etc FULL SIZE will scale content to the output resolution of the graphic card for use with a projector traditional TV plasma TV LCD TV etc FULL SIZE should not be used with DynasScan displays as the image will be cropped Copyright O 2008 DynaScan Technology Corp 68 Accelerator In first installation of AP3 accelerator the default is set as VMR7 Accelerator should be selected to match hardware efficiency The function requires restarting AP3 to validate setting after setup Please see pg 30 for more information on accelerator settings Screen Type Screen types include single view dual view and multi view dependant on the display mode of graphic card Generally the graphic card is set as clone mode representing single view display with the same output on two screens When dual view is adopted one screen is enabled as control panel to display operations and the rest work as independent screens In this configuration AP3 operation will not affect display of other played content This function takes effect immediately At maximum there may be one control screen plus three independent screens for playing content with Screen Type set as Multi Screen Sub options Screen 1 Screen 2 and Screen 3 appear under items of Startup Run an
85. ice list Network Speed Download It sets the maximum bandwidth on the network for downloading The unit is KBits and the default is 102400KB 100MB Upload It sets the maximum bandwidth on the network for uploading The unit is KBits and the default is 102400KB 100MB Copyright 2008 DynaScan Technology Corp 123 Connect Setting IP Address It sets up the IP address Please connect the internet cable before executing AP3 Config so that the field will show the PC s correct IP address If executing AP3 Config without connecting the internet it shows the default IP address 192 168 1 101 File Trans Port It sets up the port used for file transmission The default is 8765 Publish Port It sets up the port used for file publish The default is 8767 FDT Port lt sets the up port for FDT service The default is 8768 Restore Default Setting lt restores the settings to the program default Load Current Setting lt loads the settings saved in the current program Save and Exit lt saves the settings and exits AP3 Config Copyright 2008 DynaScan Technology Corp 124 6 4 File Transmit Client Open Operation Interface When a icon located at lower right corner of screen of the operating system system tray it means File Transmit Client is already activated Right click the mouse to show the option when the cursor moves over the icon Select FT Client to enable the operation interface as well as select Exit to disable the
86. ies Australia and parts of Central and South America SECAM 25 frames per second displaying 625 scan lines adopted in France east Europe Russia and some middle east countries Volume Balance Volume Volume control Balance Balance control between left and right sound channels Enable Quality Setting lf default is set as Disable the program will comply with Capture Default Setting in the Options while playing If set as Enable new settings may be selected and image quality may be adjusted Default Quality Click the button to retrieve the default Quality Please make sure the Preview function is running before it is pressed otherwise the below error dialog will be displayed Get Capture Default Quality Failed Captur must play on preview screen when get default quility Adjust Video Quality Brightness Adjust the brightness of image Brightness is decreased by moving the Slider to the left and increased by moving the slider to the right Contrast Adjust the contrast of the image Contrast is decreased by moving the Slider to the left and increased by moving the slider to the right Hue The change of hue will affect color The hue may be shifted toward purple orientation by moving the slider to the left and green orientation by moving the slider to the right Saturation Change of saturation of color The color saturation may be decreased by moving the slider to the left and increased by moving th
87. ill not be played Stop Play Stop all contents playing at the specified time and day Append Modify and Delete Action Item All action items are established modified and deleted in edit functional section Append After setting up action type action date and time click Append to establish a new action item Modify First select modified action in list modify content in edit section then click Modify to complete operation Delete Select target action in list and click Delete to remove the action from the list Copyright 2008 DynaScan Technology Corp 60 Label 1 Shutdown Disable will disable all shutdown actions If Shutdown Disable aoe Disable Coon setting is not selected all shutdown action aA will be executed according to set up time Reboot C Restart and date if setting ticked all shutdown E O 2 actions in list will not be executed and the C Start Play i computer remains on stop Play Label 2 Six action types currently consist of Date of Month alj fis Shutdown Reboot Restart AP3 Not 3 Shutdown Start Play and Stop Play Next Day Label 3 Sets action date and time Currently 12 00 00 action date provides following modes Full Append 4 Date Date of Year Date of Month Day of Modify 5 the Week and Everyday Select mode to Delete 6 decide action date or day of the week lf the shutdown time is set at 00 30am everyday earlier than boot time at 09 00am selected
88. ing for formal play as well as monitoring the play screen When acompatible graphic card is installed and the display mode has been set to dual view or extended desktop the software interface will not be shown on the displaying equipment hiding operation from public view Main menu SBGEO hw E Heka Fie Caim Fish F hn WebPsos 0487 Picker Moria Tarda pool Aosta IA o e AAA e CETT E IEA ed 1020 49 AM Label 1 Extended function section includes all keys of extended functions provided by each function button Label 2 Parameter setup section defines playing parameters of contents that vary according to different play modes Please refer to below chapters for detailed illustration Page 14 Label 3 Preview window is used to preview selected play content The size of window is related to displaying equipment and will change according to different machine models set up in Options Label 4 Preview Copyright 2008 DynaScan Technology Corp 12 Preview Operation Label 4 1 Label A Function keys of play control gt Play Start or continue to play previewed file H Pause Pause file preview B Stop Stop playing previewed file 2 Label B Track bar of file preview can present playing progress by the movement of Current Time Indicator with the timeline Clicking and dragging the CTI will change the progress of preview accordingly 3 Label C Shows
89. lay may only be selected for Media Files and playtime will equal the file length If One Time play is not selected will be added in before the time display To change a playtime of an item select the play item from in the playlist deselect the One Time play checkbox for Media Files then directly input desired time in seconds in the editing column For instance if the user inputs 180 playtime is change to 180 seconds One or two separator characters can be used as well For instance 10 00 represents 10 minutes and 1 00 00 represents 1 hour A blank number will be regarded as 0 Example 1 represents 1 hour Note Time input is not available to triggerable play items or Media Files with One Time Play selected Play All E During Sequence play played content may conflict with scheduled play The Play All E check box allows you to choose whether you will allow play items to be interrupted by scheduled play items If the check box has not been selected the play item will be interrupted by the Scheduled play item see first illustration below If E has been selected 14 an interruption will not occur see second illustration below E o B E Not Selected D can interrupt B D Schedule Item Tr rr 7 Time Unit Sec B Entire Selected Uninterruptible D Schedule Item Time Unit Sec Resume from interruption lf a play item is interrupted by Schedule the
90. lected appropriately for light number display Name To appoint and input the name of light number Target Window To appoint object and goal of the light number Copyright 2008 DynaScan Technology Corp eeseses lt i sSsSsSsSsS 6 Input Show Text To input displayed information Set Font Text editor functions to edit font pattern size color and the like Black Color Background color editor functions to edit background color of light number OK To complete parameter setup Proper hardware is required Proper operation of plugin function requires announcer with appointed specification and RS 232 transmission interface Copyright 2008 DynaScan Technology Corp 67 5 7 Options Configure layout Taui Setting Gakki Medal 051016 dd hir Seran pr pr Eto Eli MRS PL Fire Aerial TT Late Eat al Dormir Par For De Coda Adn br Fonte Estilo Hara ar o p Compa ED 004 338 0 lr ans Prepa AJUDA Wied TOO AM Label 1 Setup subject section provides setup list Clicking a subject in Label 1 will switch Label 2 to the parameter setup of the subject Label 2 Detail Parameter Setup Section Detail parameter setup of each subject will be described in following paragraphs 5 7 1 Startup Setting Select Model To select model of display equipment listing all DynaScan display models supported by AP3 The model setting will affect the size of the image in the output window as well as the commun
91. left channel Moving the slider to one end will cause audio to be output on a single channel Doing so will allow two video files to output monaural audio simultaneously Accelerator Select the video hardware accelerator used to play content When selecting Default AP3 will default to the accelerator setting in the Options If an accelerator is specified only the current content will adopt the accelerator setting and no other content will be affected nor will the accelerator setting be changed in Options For more information about accelerators please see page 30 Copyright 2008 DynaScan Technology Corp 15 SBOP ECHR E b Hecha Fie Care Pah Poe Poni web Page DTO Picar Mondor fetes 00000000 del Ered Time ee Ey Zech ae De pl alla LE Fiii 0 000 5 Vides Input eee Tl TT CETT M ALLI Wed 10 20 40 AM Maintain Aspect Ratio By default the picture will stretch video content to fit the size of the view window As a result of different aspect ratio of original file the image may be distorted To maintain the original aspect ratio check the Maintain aspect ratio box Because the aspect ratio of the content may differ from the view window black margins around picture may appear Copyright O 2008 DynaScan Technology Corp 16 Sb SO uw He bh Meda Ple Catze Mich Pome Pont WebPage OVE paj Moniz ay e o AINE wed TOD AM SOR
92. letes the selected command in item 1 s Command List The button will be grayed out if the commands can t be deleted Copyright 2008 DynaScan Technology Corp 131 Cancel Cancel the selected commands uncompleted commands in the command list The Client terminal will delete the commands after the server terminal commands are cancelled The file that is transmitting this command will be deleted simultaneously if no other commands are used The files used in other commands will remain unchanged Note The commands that are not completed with the following states can be deleted Publish Complete Pause Pausing Paused Continue and Continuing Pause Pause the selected commands uncompleted commands in the command list The Client terminal that receives this command will pause the file transmission after the Server terminal has paused the selected commands The Server and Client terminals show the current state of paused commands Note The commands that are not completed with the following states which can be paused Publish Complete Continue and Continuing Continue Use continue to unpause the transfer When the Client terminal receives this command it will restore the file transfer Just Show Transmitting Command When this function is enabled the command list shows the states of Publish Complete Error Loss File and Client Error Show Detail When this function is enabled the right side of window will item 3 will b
93. limited to the transfer between the Server and Client The transfer between Client and Client is not affected The default is disabled Hide Final It hides the transferred files from the list in the Monitor menu Net Setting Click Net Setting to show the following settings Net Setting Network Speed Dowload 204800 EBits Per Second Upload 204800 EBik Per Second LocallP Local Port Use Virtual Server iw Virtual Server IF 1192 168 1 101 Publish Port 8767 Virtual Server Port 8765 FET Port 8768 Lancel Local IP lt sets the IP address used by the local device The default is 127 0 0 1 Local Port lt sets the port used by the local device The default is 8765 Use Virtual Server lt sets enable disables the virtual server The default is enabled Virtual Server IP It sets the IP address used by the virtual server Virtual Server Port lt sets the port used by the virtual server Network Speed Download lt sets the maximum bandwidth for downloading The unit is in KBits Upload It sets the maximum bandwidth used for uploading The unit is in KBits Publish Port It sets the port used for publishing The default is 8767 Copyright 2008 DynaScan Technology Corp 143 FDT Port It sets the port used for the FDT service The default is 8768 Save and Restart It saves the current status and restarts the File Transmit Server program Cancel It cancels all altered settings Copyright
94. n Level Level of message Color Font color Image Picture setting Message Text edition Label 3 Distant control edition The user at a remote computer terminal can send a control order and edit messages via a RS 232 connection Visible Visibility of message Copyright O 2008 DynaScan Technology Corp 147 Speed Speed of message Space Interval between two messages Update Message Modify message RS 232 Port Select the proper RS 232 port to send commands to another computer Comment The remote computer should install Message Editor Operational Directions Create a new marquee message Double click here to add a new message the reminding message always shows at the bottom of the Message column in the message edit section Double left click the reminding message to enable the text input box input message and press the Enter key to add a new message Message list should be properly saved Please refer to instruction in the section Marquee Plug in for utilizing message list Content of marquee message A marquee message includes belonged level Level message string Message text color Color and prepositive image Image Marquee message will play as a cycle according to the sequence To change the message sequence users can click the left mouse button in the Message column and pull the message to a desired position Messages in different levels will not cross the line and are separated automa
95. n E PS UE PO PU PR PEE OO A T EET 59 A A AEE T E AAEE A E AA TA 59 E CON e E E E E o A 60 5 6 Plugin to ac aeo cial 63 PAO GUC HOM PPP e Co APP e SOS SU POE E E E 63 Configure layout and OPELAtiON cccccccccseeeseecceeeeeeeeeeeeceeeeeeeeeeseeceeeeeseeeeeceeeeesseeeueceeeseeeeeeeceseeeeeessseeeeeeeeesaaeeeseseeseaaas 63 pi APP A OP REO DI A 64 Mo A E REE DU A A never cncedaacucte 66 NO A SR 68 So a oe 68 AP A saeideacness space sueeewteeae ee 68 ENS A est cies ceed eee act tinea se csmnn ean case neta sneered eeeetio aceaepeasneneeeinectereead aannes sie semeeenooes 73 E A E Oe eee ee ae eee ee eee 75 e o nn A 77 A O AP EE 77 574 2 Functions of Advance Control Panel uscrioaica 83 5 7 4 3 Monitor System Schedule esssisoreii inen inei aia ESR E EREE E EAER 87 I EVENE EO ee E e o PERE RESET A A 93 A A 95 AA S eee adee ctaseeataaesneeeasedeeeteees 97 OS AUR AA nn o o A ete 98 E GUE ES LL OO PO O A II e E 100 AA le UE lo A An E E E E AEE E E A 104 A o CO 105 A O A ER E E EOE 106 AA An EE E E E a 106 BT TO OMP aeea E E 109 ed PON COM ON a E E E E 111 5 7 12 Monitor Computer ReSourCe ccccccccccsseseeececeeeeeeeeeececeeseaeeeeeeeeeeeseeeeeeeceeeesseaeaeeceeeesssaeaeseeeeeeeeesaaaeeeeeeeeeeaaas 112 arr Tera e OP ES E SUE EC EA 114 e 115 6 INTRODUCTION OF ACCESSORIAL PROGRAMS 0 cccccsseseeceeeseeeeeeneeeeeeasseceasseeeeenseeneanseeseonseessonseessones 116 o A E E A 116 SO e AP E ee er er eee eee eee 120
96. n box illustrated above You may only assign a model from the combo box when the display has been set as FULLSIZE in Startup setting Please ensure the right model is assigned to prevent an improper monitoring state Spin Speed Adjust the spin speed of the image around the display Select Fixed to disable image spin Move the slider to the right to speed up the spin speed and to the left to slow spin speed Note The action may cause Monitor System Schedule to pause unless released or AP3 restarted Display Adjust Forward To adjust screen position to the left when spin speed is Fixed Reverse To adjust screen position to the right when spin speed is Fixed Save To save screen offset position Some DynaScan displays will save it automatically please wait for 30 seconds to save the new settings after offsetting the position Power Control Enable Automatic shutdown operation of the computer will cause display shutdown and computer startup will start up AP3 and display If the setting is not selected above function will be disabled Default is set as enable Power On Off Power On Start up display Power Off Shut down display Note When Excool is disabled click Power Off once to turn off the motor LED modules remain on The LED modules will automatically turn off when motor comes to a stop Clicking Power Off a second time with motor off but rotating will cause the LED modules to t
97. nctions to update settings applying currently edited information to play item Label 7 Restore functions to revert to original settings Cannot be restored after Modify button pressed Label 8 Delete removes selected items from play list Label 9 Advance functions for advance setting adjusting detailed parameters of various types of play content and providing preview function EEEE Start Time 1 a E vernda Eve Hour 3 11 27 23 Duration Time We One Time PO lt Modify E Restore 7 ey Delete Advence g Continue 10 Label 10 Continue button continues play settings automatically calculating start time of selected items from play list Start time will be calculated from the first play item Second play item will be determined by adding its play time to the start time of the first item Copyright O 2008 DynaScan Technology Corp DO MN Expandable Timetable AA E En TEA a I SELLE PPLE T i mg 7 mT F 7 _ Sante i 5 E E 7 eens 4 a Saris AS BISAG BRD Tue BIO wed Canai Ture H Mae Ture H Tach Trees H Cinsa Ture H ZOA FUE acia Fura He Label 1 Calendar displays timetable of one week starting from the first day of a week Sunday followed by separator bars for seven days per week The user can left click the mouse to adjust date while moving mouse left and right or press right bu
98. nd is automatically zoomed in out with geometric proportion to fit the marquee display window The function only supports the BMP files currently Double left click the picture for the Image Selection Dialog Box and select the desired file to change the image The set image should not to be oversize compared to the marquee display window Instantly modify marquee content remotely There are two ways to modify the marquee content remotely They are through an internet connection and RS 232 Serial connection The marquee message can be modified during operation The updated message file will immediately apply the addition of a new message to the marquee but not immediately cause change in display Change shows in the display when the new message is reeled in and the old message will not show anymore after reeled out Therefore distant modification of the marquee content can be completed through replacing old file with a new one via the file transmission functions shared directory FTP etc Copyright 2008 DynaScan Technology Corp 149 Modify marquee content via RS 232 COM Port The user can set up a group of marquees in the playing terminal Plug in setup the RS 232 communication port like COM 1 or COM 2 the COM Port receiving the data of the Remote Comm in Marquee Parameter Setter serving the group of marquees start up Message Editor v3 0 set the RS 232 communication port the COM Port transmitting data and connect the t
99. nfirm which screen will display the currently modified sequence as Startup Run setting Once set the sequence will be played on the selected screen on Startup ee har Y a E All Ewe FCO Ma Maaf gt EVER ZOET SENS TE Len Evan TE Cara 54 Cops 4 i seme Esp de apre 3 Lori A SAd Cope Si oar Wade Eerd SA 15 E a i Sy Caphure Sa Capture a aa 541 placita 5 a etre ur ai r 3 Bator TES Toret Ej Cka zn Driid iad CAMA i a300 Wed 12040 AM Copyright 2008 DynaScan Technology Corp 58 5 5 Shutdown Introduction With the Shutdown Editor you may set a time schedule for automatic shutdown and rebooting of computer Configure layout Se ee all xj ANTE a EOS ca a actor Fa 5 12 00 00 2 P 55 2132000 J FF Thije 1234 220000 4 FE tur Deseos E COO S AiR Wed 10 7 AM _ Label1 Extended function section Label2 Editing function section Label3 Action list provides scheduled items priority setting of that can be reordered by dragging items up or down to desired position An item higher on the list represents higher priority State Enables or disables a single action Selecting the setting represents enabled action and no ticking represents disabled Actions are enabled by default Action Type Displays action type including Shutdown Reboot Restart Not Shutdown and Start Play Action Date Displays date of action
100. ng the register code Copy the authorization number to the computer generating register code and then click the button of Import License File to open the location of the authorization number and enable the number SS Cr SADA 311574100 been Fle rare DAD312F1 3700 bitene gt Open A fice ooa Cancel mE A prompt of Register License Success will be shown if the authorization Copyright O 2008 DynaScan Technology Corp 117 number is checked OK The message field will change to Release version as well and show the authorization period if any Valid period will not appear if there is no authorization period DynaScan will generate a corresponding authorization number according to the received register code so that the authorization number is not valid in other computers because the register number is generated according to computer hardware The second way is to input them online It needs to access the server directly via the internet to get the authorization number Input the IP address of the registered server and click Register server to complete the authorization procedure Register License Success will appear if the authorization number is checked as valid The message field will update to Release yano AP He piri as AA F FCO FE natal a Goi Huta eile eal Later Sen eke c Maral i ELLI rar iF Dris ed Code AL elle Seen Dees Sees Sa
101. nique of VMR9 Renderless and is capable of simultaneously displaying several instances of images horizontally or vertically 360 LED Video Displays Application Directions VMR9_WL is recommended for newer 3D graphic accelerator chipsets D3DVR is recommended for older 3D graphic accelerator chipsets or when experiencing improper playback using VMR9_WL Graphic cards that do not support 3D function or 3D function is not complete Copyright 2008 DynaScan Technology Corp 30 using the Middle setting is recommended Clone 3 should be used while displaying several of the the same content in one screen which can work more efficiently than appointing the same contents in different screens Clone serves as the only method to display multiple Captured images Appoint the Scope of Played Contents Unecessary areas of an image may cropped out by adjusting the scope of content For instance noise may be removed in the upper and lower edges of Capture black margins that have been added to screen in order to maintain aspect ratio may be removed or a small area may be extracted from a larger image Simply move your mouse to any yellow point in preview window right click the drag to change the size and position of trim layout Only the area within the red box will be displayed Reo eee alla DEDO E O Mecha Fie Carro Piah Poe Poni weba DO T Picar Honda r e LO Ghat Time ec End Tawa blo Ep A Copan be
102. nning Enable Multi Screen Function MultiScreen lf MultiScreen is set as Screen Type in Option click to set the Sequence as Startup Run item AP3 will confirm which screen will display the currently modified sequence as Startup Run setting Once set the sequence will be played on the selected screen on Startup E Seganace Elite We ajoj zi gwik MISC x email rg Shae r Mult Screen 1 E A iia direis Multi Screen 2 Multi Screen 3 gt oim ooo E rn ECET AHAAA Wed 19 208 AN Use Shift or Ctrl to create Multiple Choices from Play Files Left click while pressing Shift key to select several consecutive files from file list left click while pressing Ctrl key to select several inconsecutive files from file list For instance if Media File contains total 9 MPEG files from Demo01 mpg Demo09 mpg but play content only includes Demo01 Copyright 2008 DynaScan Technology Corp 47 Demo02 Demo03 Demo04 Demo06 and Demo09 left click Demo01 selected items are highlighted in blue first Then left click Demo04 while pressing Shift key to select Demo01 04 turn blue and release Shift finally left click Demo06 and Demo09 respectively while pressing Ctrl key Through above operation all desired contents turn blue representing selected status Press left mouse button and pull selected items to play list Play time of Flash and PowerPoint files in a schedule Default play time in AP3 is set as 30 secon
103. nt editing section kd Startup Sets layout as default startup play item The system will confirm if the layout in editing section needs to be saved al Publish Exports the layout settings including the Schedule Sequence and all the video content files in the current Layout to a CF Card SD Card USB Drive etc After inserting media into another computer files may be played directly once AP3 has completed media path setup Remote Publish Transmits the layout settings including the Schedule Sequence and all the content files belong to the current Layout to remote target computer s via internet Content will automatically play when publish has finished Applies to AP3 Server only Page 37 Copyright 2008 DynaScan Technology Corp 33 Edit Layout What is Layout and what is View Layout refers to the total layout configuration of the video output One DynaScan display can simultaneously contain several sub pictures playing different content and each of which is called a View One layout can contain several views depending on efficiency of hardware Default Layout Label 2 Seven commonly used layout templates have been provided by AP3 Left double click the desired layout to load it in editing section Once loaded into the editing section the layout may be modified Note Default layouts cannot be deleted or overwritten CIL ode ce LA Default Pattern O Default Pattern 1 Default Pattern 2 Default P
104. ntains information of play content Represents a target file that is not playable For instance if the file has been deleted or moved to another location AP3 cannot locate file target and play it Copyright 2008 DynaScan Technology Corp 49 Type Type of played item e g Media File Flash etc Name Name of play item Start Time Displays start time of play item Time Time duration of play item On time Play O Force content to play on time Play All E Sets play item to play in full without interruption Comment Remark or description column for play item The start time of the first play item from the list of played files is determined according to time setting in file schedule To avoid interruption the start time of subsequently added play items will be automatically calculated by adding time length to start time of last item However if a new play item is inserted into a Sequence play list the Start time of newly inserted item will automatically follow the last item in the list and will cause an overlapped start time of original and inserted items To resolve this issue select the inserted and original items in the Schdule hold Control while clicking then click Continue button in editing section to automatically adjust start times Label 5 Editing section of played contents contains functions like Time Setup play length adjustment Comment Column Deletion of play item and detail adjustment of p
105. o create a playlist of several content files that will play sequencially Once all content in the sequence has finished playing the sequence will repeat from the beginning of the playlist Configure layout eee aoc ch AE WIN Wed TOAD AM Label 1 Extended function section Label 2 List of play item types Currently 9 play item types are supported Media File Capture Flash Power Point Web Page Satellite Picture Plugin and Layout Label 3 Lists all playable files types found in the directory of Default Path seting in Option Click to select a file or select several files by pressing Shift or Ctrl while clicking and drag it to Play List to add it Label 4 Play List area Contains additional information on each play item Represents a target file that is not playable For instance if the file has been deleted or moved to another location AP3 cannot locate file target and play it Copyright O 2008 DynaScan Technology Corp 39 Type Type of played item e g Media File Flash etc Name Name of played item Time Time duration of play item Play All E Sets play item to play in full without interruption Resume Sets how a play item should resume if interrupted Comment Remark or description column for play item Label 5 Editing section of played contents contains functions like Time Setup Comment Column Resume Setup of editing section Modify Setup of play items Deletion of
106. og will reboot the PC and try to resolve the failure The default is enabled Restore Default Setting lt restores the settings to the program default Load Current Setting lt loads the settings saved in the current program Save and Exit lt saves the settings and exits AP3 Config Copyright 2008 DynaScan Technology Corp 122 6 3 AP3 Config Server Introduction When the AP3 Server has finished installing Then run AP3 Config to execute it before running AP3 DSPlayer for the first time Note that everytime AP3 Config executes the values and settings are shown in as the programs defaults without loading the previous settings Be sure that the internet is connected before executing AP3 Config AP Config 0 1 0 3 APS NetPlayer Server Default Setting Machine List IP Address 192 168 1101 Name UIP Port Port 8766 Mame Client 4ppend Machine Remove Machine Network Speed Connect Setting Download 102400 EBits Per Second IP Address gt 1192 168 1 100 Upload 102400 E Bits Per Second File Trans Port 8765 Publish Fort 8767 Restore Default Setting Load Current Setting 8768 FOT Port Save and Exit Machine List IP Address It sets the IP address used by the new device Port It sets the port used by the new device Name It sets the name used by the new device Append Machine It appends the above 3 settings to the device list Remove Machine It removes the selected device from the dev
107. op button is pressed The selected time acts as the interval between turning the LED Modules on and off Note Not all models support this function Scan Pause 1 LEDM Control Click on the LED Module number to turn that actual LED module on off Comment Green On Black Off Grey Not Detected LEO M Contro or Ce Ce Ge ed ee i KAD 25 26 27 28 29 30 31 52 dE SS a eE GS a i e I Se Copyright 2008 DynaScan Technology Corp 84 Running Time This shows the time of the displays running history Running Time 791 hr 52 min Power On Safe Time The default amount of time is 360 seconds The user cannot restart power within the set safe time after the display is off This restriction is made to help protect the DynaScan display To have a valid time enter the appropriate time in seconds and press Enter This parameter can be adjusted by the user DynaScan Company is not responsible for any damaged caused to the Display by over short safe time set by the user Excool Enable This is a function to cool the display after it has been turned off Some models do not support the function and are grayed out Note Support for models DS0706 DS0716 DS1016 DS1713 3 DS2012 3 and DS3522 Information S N Display serial number DVI Version F W version of DVI board MCB A Version not available MCB B Version not available Infomation MCE 4 Version SAN 0535220007 Dl Ve
108. or the command has not been transmitted Gray The machine transmitting command has an invalid state The information displayed as follows Index Number Machine The name of performance facility Got Time The time for getting the command Complete Time The time for completing the file transfer Done Time The amount of time until the file will be done state The current performing state The states divided as below Common States Wait for Get Getting Got Trans Complete and Final Performing States for Cancelling the Command Cancel Waiting Cancel Got Cancel Done Performing States for Pausing the Command Pause Waiting Pause Got Pause Done Performing States for Continuing the Command Continue Waiting Continue Got Copyright 2008 DynaScan Technology Corp 133 Error States Error Belated OpenFile Failed and Command Error Progress The current performing progress 3 File Information Display Area This display area occurs only when the function of Show Detail is activated This area will show the detailed file information after selecting the command in command list 4 Message Display Area The related message will show on this area Be able to view more messages by scrolling the Bar at right side of window 5 Network Transfer Speed The networks current upload and download transferring speed Command File State Double click the left mouse button on the machine performing the file transmission of the Area 2 Machine List The sc
109. own the computer AP3 will execute the appropriate action when the numerical value reaches the current setting Copyright 2008 DynaScan Technology Corp 112 Enable the Auto Report Resource function to have the program record monitored data for future reference All saved data will be in Message log For the settings to take effect and be saved be sure to click SET Click Cancel to abandon setting The Default Running Time is set to 24 hours then the computer will restart automatically Users are recommended to enable this feature when constant play is expected in order to avoid the computer going down content termination or unpredictable issues caused by over consumption of resources Copyright 2008 DynaScan Technology Corp 113 5 7 13 Test Pattern The Test pattern is for users to conduct color quality adjustments PO Option ENET tags Creare Tost Patun sr Par D riia Postion Pune Color Lesni Coka iaj Dam er o m m rr ern nate a lite Dhamh Hed Pies AA NA Lar Teih Ei Hie IE vent Los Ho Fed Ha Perl et Ho Ca Pdo mari 3 A M s he Ms ik RL Corts Eli Black tee Pas Cara Lair Varo Contra Can Ar Hara er Corera SHIP tone Posse Lorin Pepo Mondo Pia i I i p MOO ma play itea OOOO 10 00 mo play id Cima ASA Wied 10 01 40 AM Pure Color After the output color is selected the display shows a pure color pattern of the selected color The color options available are White Red G
110. play items and Advanced Setup etc Function Buttons Extended function section D ted H Ah F ad g O New Creates a new playlist for Sequential Play 154 Open Open a previously saved Sequence File with seq as filename extension El Save Saves changes to the current Sequence 1 Save as Saves current Sequence as a new Sequence file Export csv Exports information from current play list to an Excel file Al Path Open Path window to load content files from another directory Ld Play Play content immediately according to the sequence settings in the current play list kd Set Startup Run Sets Sequence as default startup play item The system will confirm if the Sequence in editing section needs to be saved Bel Background Set up background music After creating sequence the play list should first be saved as a sequence file seq as the filename extension and then click Background button to set play list as background music If the list is empty or has not been saved pressing button will set up a new but invalid file of background music al Publish Exports the Sequence and all the video content files in the current Copyright O 2008 DynaScan Technology Corp 40 playlist to a CF Card SD Card USB Drive etc After inserting media into another computer files may be played directly once AP3 has completed media path setup Remote Publish Transmit the current play list includin
111. program Note The program only supports the versions of AP3 Standard Client and AP3 Embedded Operation Interface Description Fide Treat Chest ey rel ip l Fa Teati ihi L Te seg 5 Chemie rege E Denat mpg T Path seg Pub rel pe 3 Pubiihiliod pa 10 Publuhilimad me Facer Dried Evert Mace Dorricsd E verd Fasa Clos Feed Pi Pinsent Deeks E erri Feoserent linkem F erri Pees haaa E ert Tamia Speed Upc tih Bown 7527 Ebr 3 There are five parts on operation interface 1 Fie Transmit List 2 Message Display Area 3 Network Transfer Speed Display 4 Network Transfer Speed Setting 5 Related Function Setting Copyright 2008 DynaScan Technology Corp 125 1 File Transmit List Index Number Filename The file name being transmitted State The current state of the file being transmitted The states consist of Empty Transmit Complete Final and Pause Percent The completed percentage shows 0 100 The users can read the status from this field Progress Transfer state graph It is displayed by color which integrates the information of file block state and completed percentage Black This block means has not start to download Pink This block means loading data Red This block means download completed but the file is incompleted Green This means the file is already completed and can be broadcasted Blue The block means is uploading data White This means there i
112. quence Schedule Layout 8 Capture The Startup Run screen provides four play types with fields for automatic play for each type If the column is empty no setup content is available for the play type l a play type is selected but its corresponding field is empty the program will not execute automatic play on startup After editing a Sequence Schedule or Layout click in extended function section to complete setup and enable automatic play The automatic play item will be shown on the Startup Run screen illustrated above Click _Clear button to the right of Sequence Schedule or Layout to remove content for automatic play BGM Type The field will display filename set as background music and display None Copyright O 2008 DynaScan Technology Corp 73 when no background music has been set Background The field displays content with set background music under Sequence Editor Click 84 in extended function section of Schedule Editor to appoint background Click Cea button next to Background field to remove previously set background music What is Background Music Setup and what is that for Background music refers to audio output with no image suitable for content with no audio output e g pictures or requires a separate audio track MultiScreen lf MultiScreen is set as Screen Type in Startup Setting sub options of Screen 1 Screen 2 and Screen 3 are shown under Startup Run column The user should appoint content
113. re are three options to resume playback once the interruption has finished Continue to continuing to play from interrupted point f Abandon to skip over interrupted content completely Copyright 2008 DynaScan Technology CA AB and play the next item on the playlist or I Replay to replay the interrupted item from the beginning The default resume setting is Abandon f Click the resume icon to cycle through each option and change setting Note Not available to triggerable play items l Pa B Resume Continue from the stop moment D Schedule Item Time Unit Sec D Schedule Item T 1 1 1 A T NT TN Time Unit Sec E oie D Schedule Item Time Unit Sec Comment You may enter a personalized description by entering text in the comment section and pressing Modify Label 1 Set the play duration of a play item This function is rl available for Media Files only if One Time play 0 15 Label2 setting is not selected 2 Label 2 To set as One Time play This function is available Tai Fije for Media File play types This is selected by default and play time of a Media File play item is equal to 3 the length of media file Label 3 Comment may be added to play item by entering text in the comment section and pressing Modify a Label 4 Restores previous settings Reverts back to setting before modifying play time or entering comments 9 Medi
114. re allows users to change default paths to help with better orginizatoin For automatic startup the content schedule layout should be in the specified default path E Pp Gare SCHGao he EW a Mano Hun Dra Fora Mortar Tyi Goren Pach Cinna Chadds Pah Ahan Shee vert Ley Bling Path Hear FC Condal lara ati Vale Doria Loa rd Haha Ser Corera STP Sete Pera Lorin Hepes Morena T el rey Fi tess ASA Wed 100 01 40 AM Content Path Click the button for a path window to change the content default path Click the OK button to complete path setup ES Label itle El My Computer A 1GB2 C DGB8 D Remo able Disk 3 Removable Disk F Removable Disk G Removable Disk H Control Panel My Documents Shared Documents Documentecumente Network Places OF Cancel Copyright O 2008 DynaScan Technology Corp 98 Schedule Path Click the button for a path window to change the schedules default path Click the OK button to complete path setup Layout Path Click the button for a path window to change the layouts default path Click the OK button to complete path setup Billing Path Click the button for a path window to change the billing default path Click the OK button to complete path setup Copyright 2008 DynaScan Technology Corp 99 5 7 7 Capture Setting kS Crp hit AE src Par Display Pest ieee Safer Dip Er nL Tohii vart Laz Freri RL Cori
115. rectly input display position Aside from adjusting the display position with Move Zoom out and Zoom in you may also directly input a number to display columns of Left Right Top and Bottom for position adjustment Pressing Enter on keyboard will apply the adjustment of the display postion Display Position Move Position 3 IS EA C Zoomin Left fE Right 6 Top 84 Bolton 84 Left Top Right amp Bottom The text fields under fine adjustment buttons display the offset from original position Default offset is O for Left Right Top and Bottom columns Along horizontal axis numbers greater than O represent position moving to the right and less than O represent position moving to the left Along the vertical axis numbers greater than O represent position moving downward and less than 0 represent upward MultiScreen If MultiScreen is set as Screen Type in Startup Setting sub options of screen 1 Screen 2 and Screen 3 show under Custom Position column The user should appoint content for automatic play in each playing screen Display Positien Sernam 7 fa bee Poster ay o Oui ea al zm bel 5 Don le L7 Le 10 Figh 0 top 0 Defies 0 NAL Wed 10200 45 Copyright O 2008 DynaScan Technology Corp 76 5 7 4 Monitor System AP3 s Built in Monitor System works exclusively with DynaScan displays All functions will take ef
116. reen Blue Cyan No Red Purple No Green Yellow No Blue and Black Level Color After the output color is selected the display shows a gradient level of color The color ranges from light to dark on the screen from the top to the bottom with numbers in the pattern representing the value of brightness of each grid The color options available are White Red Green Blue Cyan No Red Purple No Green Yellow No Blue and Black Copyright O 2008 DynaScan Technology Corp 114 5 7 14 About The function provides the AP3 version and DynaScan information like contact phone fax website etc boa Dynatcan AP CJ E UA 18 ur A aa K2 Dime Teri Cai AFI Bue Ut 2 SR Blond Pla Tope Serve Co 133 A A ag lech ll E AAA Fax 006 100 1545 hb ay CA O ic PA Miocrnbhi bec MATO Darade Lora oc 0S 2000 Ed Ltd Carga 02006 in Condes Load hpr Ars bg dt hi oe Copyright O 2008 DynaScan Technology Corp 115 6 Introduction of Accessorial Programs 6 1 AP3 Register Functions It installs the serial number and authorization number Input AP3 Standard Server Serial Nubmer Input the AP3 Standard Server serial number in the Serial Number field or click to import the serial number Click Install when done The authorization status of AP3 can be queried in the message field Install Success will appear if the serial number was accepted and the message field will update with a
117. reen will show the list window of the Command File State The list will show the file information of the transferring machine The messages shown are Index Filename state Size Percent and Progress fe fel e 1 Command File State MAC State See Phere Cero Completa 113HD 100 006 Premera 2 Dp Tran TH HE TF TEX J SG a Liria 2 HE 100 UL 4 herra dr Trairi AR Beri SA dale oF Cin Tos Speed Deere 2041 SN ba peel 200 kbs a Filename The name of the file being transfered State This is the files current transmitting state The state includes Empty Transmit Complete and Final Copyright 2008 DynaScan Technology Corp 134 Size The capacity size of the file Percent The completed percentage shows 0 100 The users can read the status from this field Progress This graph displays the transfer state It is displayed by color which integrates the information of the file block state and completed percentage Black This block shows the downloads that have not started Pink This block shows the loading data Red This block means the download completed but the file was not completed Green It means the file has already completed and can be used Blue This block is uploading data White There is no sufficient capacity in storage site can to download the file Publish The users can process the publishing file and upgrade AP3 in this page 4 File Imami Serves Commer Pati
118. rsion MCB B Version Display Mode Not available Copyright 2008 DynaScan Technology Corp 85 Force Power Off This will manually power off the display and motor The only supported model is DS1016 Motor Off This will manually power off the motor The only model supported is DS1016 Clear Alarm Record This status sign will be shown in yellow to remind the users if the display has had abnormal conditions Click it to clear the alarm record and the sign will be returned to normal The only model supported is DS1016 Thermal Warning This enables the Thermal Warning function It will reduce the brightness when the temperature is too hot refer to Thermal Warning for more information By default thermal warning is enabled Thermal warning can be disabled by unchecking the box When the display is restarted it will become enabled as default The only model supported is DS1016 Auto Virtual Encoder This enables the Auto Virtual Encoder function It will automatically use the Virtual Encoder when the hardware encoder malfunctions if enabled This feature can be disabled but when the display is restarted it will become enabled as default The only model supported is DS1016 Auto Brightness When this option is enabled the display will automatically adjust its brightness according to the ambient luminance The display will be brighter when the ambient luminance increases and the display will be dimmer when the ambient luminance decre
119. rting APS The default is set as disable The function takes effect after restarting AP3 What is billing record and how to use it Billing record is saved to the folder set by Billing Path It will generate two files with filename extension as rec and cnt Billing Report is a accessorial program and is required to transform original file to an Excel document Please refer to introduction of accessorial program for the usage of Billing Report page 151 Computer ID The user may operate several display equipment simultaneously and need to distinguish the billing record of each computer This function is provided to enhance identification of each individual record as the user can input a unique identification number for each computer The function takes effect after restarting AP3 once setup Copyright 2008 DynaScan Technology Corp 70 Billing Write Frequency The user can independently determine interval between two times of billing write The shorter the interval is the more frequent the billing write is Default is set as 5 sec time Content in Sequence Preload lf enabled the Sequence play will preload next play content to reduce transition time Three file types are supported Media File Capture and Picture VMR9_WL Accelerator supports the function that sets default as C disable Content in Schedule Preload lf enabled the Schedule play will preload next play content to reduce transition time Three file t
120. s Detail Displays a detailed list of billing records regarding play material Copyright O 2008 DynaScan Technology Corp 151 Label 2 List of Play Material Index Index of Play Material Indicate abnormal play records Filename Name of the play material including type and content Play Time Play time of material Play Count Total play times of selected material Total Time Total play time of all material Start Time Startup Time amp Date of first play End Time End Time amp Date of last play Detail of billing report 1 Hadas Pike ote Diem rg SRST Oe SE 0014 45 if Hii ac 1313 caq A F Heds ti Eie s e AMEA Ob T Hj Wes 1212503 Det J Heia F E rt a TRAPATT 00174 LZ 217 Y 1317 omy Ted nat an 30 a eis ide EEr Der me AE MANO AE OS ass il Wes 1212963 Deut 5 Hita fF i Dona moy ADOOS Oa 155 Was 1212 64 Dti 5 Heis ti EL entered Demet meg TEA DO AE 1 21 212 Wea 121253 Dey 23 r Heati Lente Dem me AAA MAA if HI a 12123 Deol g Ho i Fl En iri ea g MENA OA Ls ilj Wes 1212 Deba 4 Heia Oana Dias mg ADEA IORI ODS LI 217 Wa 1712 544 Tht nal aes ayj 1a hiai Fs E ont Died ma AENA OA de 34 ii e 127 i Doiii 11 Heis File DA Corte ll rep 20612013 004546 0047 37 1 ail Wan 112 cq ie T2 Mecha Fide E n irt meg SEVP SS 00040 25 LE 2128 e 12125 Dell A ride r 1 Medea ti ioie ea moy AEAT OSE on H as 1212 580 Dayi 13 Hed Fie Elenite Diemal mej 20521300056 06 or 42 Ls id Yes 121
121. s not enough storage space to save the file 2 Message Display Area The transferring message will be shown on this area Check the rest of the message by scrolling the right bar of the window 3 Network Transfer Speed Display This area shows the transfer speed for the current uploads and downloads The unit is kbs 4 Network Transfer Speed Setting Upload Speed It is for setting bandwidth ratio when uploading Max Using 100 bandwidth Middle Using 50 bandwidth Min Using 25 bandwidth Download Speed It is for setting bandwidth ratio when downloading Max Using 100 bandwidth Middle Using 50 bandwidth Min Using 25 bandwidth 5 Related Function Setting Be able to perform the related function settings Copyright O 2008 DynaScan Technology Corp 126 Remove File Remove the selected file in file transfer list Be aware that the program will stop transfering at any time and delete the file if selected during a file transfer Refresh File List Refresh real time information in file transfer list Command Manager Cor r Ll AA _ i plo is DA ee ubh pe A Peal py in Tages Te e A l rgi Dei mpg Vena 3 Grp end moppii 1 Refresh Command List Refresh the information in command list area 2 Clear Invalid Command Clear invalid or discontinued commands and include error and belated commands Clear Failed Command Clear the error commands which are unable to be completed Clear Belated Command Cle
122. s the computer similar to reboot function of operating system Restart Restarts APS T Pp hiri SPREOSOBe E TL Say Power Control sr Par Display Pest eee ter en is air Shut Down rer Lag Perring FIC Corral Derius air odres Lori Diii Sard rima i ai Pri ehane Hiriy Tea Faha Fol ASNO Wied 101 01 40 AM Copyright O 2008 DynaScan Technology Corp 111 5 7 12 Monitor Computer Resource This function of the computer is resource management to prevent computer problems caused by an over consumption of resources If it is not necessary do not change any of the monitoring values PC Option pm F 3 a oll 1 SAO RNG Hesource Monitor rio Har Li ra F ca Mirar fer en es Ab are Tehk ert Los Penang BC Corte Daui Fat Capa air 10000 Waker Conte 10005 Dak baer Hara er pra STP Scene This mnamo luncison wall be adinan afbor ina minubes of the pogram running dto Mepor Perera E H IE ao A o A ye wid Jia a Enable Resource Monitor By default this is disabled The resource monitoring system will be loaded after it is enabled Label 1 Current value of resources being used Label 2 Monitor setting can be modified by operators based on personal needs Label 3 There are four different options for the computer to perform if too many resources are being consumed Disable No action will be taken Restart Restart APS Reboot Restart the computer shutdown Shut d
123. saFe Cactus Flach Por Pant Wb Page A i Pebje 9 hoc Content MIRADO hed JS AM Content Click to open the Select File browser Then it can preview or play after select the setting file for satellite TV Volume Balance Moving Volume Control slider will adjust the audio level of played content Slide it the left to reduce the volume and right to increase Centering the balance slider will produce even output in left and right audio channels Moving the slider to left will reduce output from right sound channel and to right will reduce output from left channel Moving the slider to one end will cause audio to be output on a single channel Doing so will allow two video files to output monaural audio simultaneously Accelerator Select the video hardware accelerator used to play content When selecting Default AP3 will default to the accelerator setting in the Options If an accelerator is specified only the current content will adopt the accelerator setting and no other content will be affected nor will the accelerator setting be changed in Options Copyright 2008 DynaScan Technology Corp 26 For more information about accelerators please see page 30 Maintain Aspect Ratio By default the picture will stretch video content to fit the size of the view window As a result of different aspect ratio of original file the image may be distorted To maintain the original aspect ratio check the Maintain aspect r
124. splay position To change display position of marquee l the slider is at left end display position of marquee will be the farthest from screen center Display position will move closer to screen center with the slider pulled towards right side Offset Left or Top To reduce left or upper display scope Display scope will be reduced to the left of or in the upper part of marquee with slider pulled towards the right Offset Right or Bottom To reduce right or lower display scope Display scope will be reduced to the right of or in the lower part of marquee with slider pulled towards right Trans To adjust transparency of marquee text and background Function is not currently available Name To input name of the marquee Target Window To set the display area or View where the marquee will appear Remote Comm To appoint RS 232 communiation port for remote control and operation Back Image To set up marquee background Message File To select information source file Click 1 for path window locate information file and click enable button to complete path setup Set Font Select font pattern size color and other additional options Back Color Background color editor functions to edit background color of marquee TextH Displays pixel size of currently appointed text Mode The mode consists of Window Mode and Blend Mode Blend mode not currently available OK To complete parameter setup Displaying Multiple
125. t 10 00pm Copyright 2008 DynaScan Technology Corp 62 5 6 Plugin Introduction To display all plugin devices and files enable or disable plugin function as well as to add delete and modify plugin device Configure layout and operation T Himi THD EO D Pig Debi Se Lagttteure Plug E Lihat Peed tae Pla AG Lt Pgrd da 2 Piaget Aju Tt Wad JO US AM Label 1 Plugin Disable will disable or enable all plugin functions with default set as selected enable Select Plugin Disable to disable individual plugin functions marquee and light number in the screen and make them invisible Label 2 List of plugin types currently provides LightNum Plugin and Marquee Plugin After selecting plugin type add desired plugin to service list by left double clicking the mouse or dragging the plugin to the list Label 3 Plugin list provides all processed plug in Represents that the file target cannot be executed AP3 has failed to locate target files that have been deleted or relocated State Enable or disable an individual plugin The plugin will be invisible if the setting is not selected Name Plugin name The program will provide a default name to added plugin which may be renamed Copyright O 2008 DynaScan Technology Corp 63 File File source of the plugin Target Target area the plugin is displayed Label 4 Select modified plugin item
126. t have been saved Export lt exports the event log to an Excel file Hide Info lt hides the Information type messages in the display box Copyright O 2008 DynaScan Technology Corp 93 Hide Warning This will hide the Warning type messages in the display box Event Log Area Each item indicates an event and the columns are Type is the event type which has Information Warning and Error Time is the time the event occurred Source is the source of the event ID is invalid at present always 0 Desc is the description of event Copyright 2008 DynaScan Technology Corp 94 5 7 4 5 Recording This option records the displays temperature for assessment by professionals mm ial xj E Gseohn E id M Diib Fioccrdes linfa raat Mo Diraplar Pot Load Flerare 1 mapa e Bionic 5yabara Dior eh ree Teper Fl DTA AND E 1 e a O MA mxo wo H Aas aur 2 id W a do Mm ml oC T E AFRO Weed 10 005 aM Disable Recording This will not record the displays temperature until deselected Min Pixel The temperature in the display area is shown as a Curve users can adjust the display range of each pixel The default is 1 Min Pixel Users can slide the bar to adjust the curve to a range subitable for observation The maximum value is 48 Min Pixel Option This button shows the following option settings e Curve View Curve View The record
127. ta i X Active Object Cancel Text Color Back Image m Message LD F Visibled Active Object Name of appointed marquee Page 63 Visible Sets visibility of marquee Back Image Set up background picture for marquee Message Set up message displayed in marquee Text Color Show the color of text Copyright 2008 DynaScan Technology Corp 45 Advance settings for Layout selection 7i elect Layout LE Test lot Test lot Test3 lot Test4 lot Test5 lot JA Test lot Test lot xi Display Defaut Layout list Lists all layout files in default layout path excluding default layouts Display Select screen to display layout If default is selected layout will be set to the screen playing the sequence This function applies to multi screen display setups Additional Information Can a Play Item be interrupted Please refer to Scheduled Play Process Page 49 for Schedule Play supported by AP3 When a play item is scheduled to play the player will stop any content currently playing to play scheduled content AP3 applies an interrupt priority system to determine if interruption would occur at the time for scheduled play An interruption will depend on Play All E property of interrupter currently played item and On time Play property of interrupter scheduled played item Page 52 A Sequence Play Item with Play All E checkbox not selected may be interrupted by Sch
128. tecting Motor Not Enable Disable Started detecting Tilt Alarm gt 15 Motor Abnormal In Not Abnormal Alarm Status Order detecting before ae Ea Abnormal Not Abnormal Status Order detecting before Copyright 2008 DynaScan Technology Corp 80 Thermal Abnormal In Not Abnormal vel Status Order detectin before gt 60 C g AC DC1 Abnormal Not Abnormal Alarm Status detecting before AC DC2 Abnormal In Not Abnormal Alarm Status Order detecting before AC DC3 Abnormal In Not Abnormal Alarm Status Order detecting before Preheat Precool Precool Excool Excool Thermal Warning Preheat Precool Excool This shows the status for Preheat Precool and Excool Preheat If the temperature of the drum is below 5 C when the display is started Preheat mode will be activated showing Er yellow the screen will not spin The Preheat state will be deactived when the drum s temperature is greater than 5C or about 8 minutes Certain models only Precool If the temperature of the drum is above 35 C when the dispay is started Precool mode will be activated showing E blue the screen will spin and LED s will be turned off The Precool state will be deactived when the drum s temperature is below 35 C or about 5 minutes Certain models only Excool When the display is shutting down Excool mode will be activated showing a blue the display will be spinning and bl
129. th If One Time play is not selected will be added in before the time display To change a playtime of an item select the play item from in the playlist deselect the One Time play checkbox for Media Files then directly input desired time in seconds in the editing column For instance if the user inputs 180 playtime is change to 180 seconds One or two separator characters can be used as well For instance 10 00 represents 10 minutes and 1 00 00 represents 1 hour A blank number will be regarded as 0 Example 1 represents 1 hour Note Time input is not available to triggerable play items or Media Files with One Time Play selected On Time Play Forces Schedule play item to play On Time If the setting is not ticked C scheduled content will be delayed to completion of current contents if the setting is ticked M scheduled content will not be Copyright 2008 DynaScan Technology Corp eeses s lt i sSsSS B delayed and will interrupt ay current playing content Directly click the column to change setting Not available for triggerable play items If Play All E is set up in Sequence M and On time Play O in Schedule is ticked as well the latter is operated as the first priority B Sequence item with Entire D Schedule item without O On Time Unable to Interrupt B Time Unit Sec B Sequence item with Entire D Schedule item with O On Time
130. tically Message level Messages will be differentiated in the Level Column with 4 Messages with 4 and those without 4 can be regarded as two groups The smaller one has a higher exposure frequency A message inserted in the smaller group may have a frequent exposure in the marquee For instance before edition the setup in the above picture a messages will be played repeatedly according to the sequence one two three However once the user sets up a level to the marquees in the first and second line but not setting a level to those in the third line will play the sequence changes to one three two three Double left click the Level Column to modify the marquee level and the message sequence will change accordingly Message string This refers to the text shown in the marquee The user can double click the text column to show the text input box input Copyright 2008 DynaScan Technology Corp 148 message and press the Enter key to complete the operation Text color A selected color is represented by the color pieces in the Color Column Double left click for Color List select the color and press Enter to complete the modification 13 las corr Ei FAT ME MFrarana cae Custom cokora En BrE Ergi Deire Lupton Coda 35 Prepositive Image The image column will show the filename of the prepositive image set to the current message When the marquee displays the message an appointed image is shown in front of the text a
131. time point is the time for playing or the time stopping play operation Additional Explanation Schedule Rule of Action Item Shutdown setting may be changed temporarily but the temporary change will need to be removed or disabled once the temporary change has taken place in order to return to normal operating times The Shutdown editor provides higher priority to action items that are higher on the list For instance if shutdown time is set as 10pm every night and the temporary shutdown time is set at 11pm that night the newly added item will show on top of list and AP3 will execute shutdown operation at 11pm that night ignoring the usual shutdown time of 10pm Why adopt Next Day setting The Next Day setting enables a one day difference between the execution date and determination date as shutdown setting only has one valid date per day For instance original shutdown time is 10pm every night but X day requires shutdown at 1 00am because of special needs If newly added shutdown is set at 1 00am on X 1 day daily 10 00pm shutdown is valid on X day and two settings are not compared regarding the same date Two methods help to achieve purpose The first refers to adding an action item of Not Shutdown to X day in order to enable shutdown time on next day X 1 day because of no shutdown time set for X day However the best method is to directly add a shutdown item to X day at 1 00am of Next Day in front of everyday shutdown seiting a
132. ting Device It selects the device for saving content The drop down list is for selecting the device to place the file The devices Supported memory cards include CF MicroDrive SD MMC MS MSPRO and SmartMedia The program will auto detect if there is a Supported USB drive plugged in This option can be set when the hardware is in use the gray scale can t be set when the hardware is not in use Note Only one Path and Device can be used 6 Auto Startup lt selects whether to enable the startup function of File Transmit Client auto run The default is enabled Soft Watchdog Enable It selects whether to enable the function of software Watchdog The function of Watchdog will restart the computer for troubleshooting after starting File Transmit Client stops responding The default is enabled Firewall Server Port It sets the Firewall Server ports used to perform the operation for firewall via Firewall Server If there is no setting for the port it will cause the firewall to block the outside connecting of File Transmit Client The default value is 2267 FDT Port It sets the port of single point transmit The default value is 8768 7 Save and Restart lt saves the current setting state and restarts File Transmit Client Cancel Cancels any unsaved settings 8 Server Setting IP lt sets IP address of the server Port It sets Port of the server Copyright O 2008 DynaScan Technology Corp 130 6 5 File Transmit Server Open
133. tions Power Control lt sets the time the display turns on off Brightness It sets the displays brightness level spin Speed It sets the displays spin speed Start Time specifies the start time of the Action Type indicates the type of time to be used The types are Full Date It specifies a specific year with a month and date Date of Year It specifies the month and date of every year Date of Month It specifies the date of every month Day of the Week It specifies the day of the week or certain days Everyday It specifies everyday Date y indicates a date to be used The date types are Full Date YYYY MM DD it specifies the exact year month and date Date of Year MM DD it specifies the month and date of every year Date of Month It specifies the date of every month Day of the Week lt shows 7 days in the week S 123456 will appear for multiple selections Everyday It is disabled Time indicates a specified time in the expression of hour minute second in 24 hour system To modify the start time select Type first and then Date The lower right fields vary depending on the Action selected Copyright 2008 DynaScan Technology Corp 88 Power Control The user can edit Duration and End Time Duration is the Power On time length in the format hour minute second Users can input hh mm ss to specify the playing length There is no restriction on the wat to input time for example 3 or 180 will
134. tomatically play when publish finished AP3 Server only See Page 37 for more information Edit layout Difference between Scheduled Play and Sequential Play scheduled Play refers to playing content at a predetermined scheduled time sequential Play does not rely on a schedule to function it repeatedly plays content in a playlist until stopped or interrupted by Scheduled Play Modify Schedule Play List In Scheduled Play just like Sequenced Play you may add new items by dragging targets to play list and change their order by dragging up or down to another position After arranging the sequence of the play items in the list click Continue continuous play setting button to count the total time of selected items What is play sequence of background A Scheduled playlist should also appoint a Sequence for background play The user should click sequence in play type and pull sequence file from file list to the blank shown in Label 7 or click to appoint the Sequence directly This may be cancelled by pressing the Clear button During scheduled play there may be times when no content has been scheduled to play Now background sequence starts to play appointed items until the next scheduled play item begins to play interrupting the background sequence When Copyright 2008 DynaScan Technology Corp 51 next vacancy occurs background music will continue the sequence from interrupted point end oie Best qd TN Tae al GI
135. tton of the mouse to open the dialog of date appointment and directly select date here July 2008 Sun Mon Tue Wed Thu Fr Sat 3 4 46 10 11 12 15 16 17 af 15 de 3 4d 5 2b 24 30 31 lt Today 8 14 2008 Label 2 Provides a quick reference of play Items scheduled that day A blue background represents scheduled play at the time Orange represents a time conflict overlapped of two play items or more and white displays expanded details Label 3 To select Week as display mode lf selecting this setting play contents for seven days will be displayed simultaneously if not selected only scheduled content for one day is shown Label 4 Hour list represents half hour with each mark A white separator separates two consecutive days Label 5 Visual representation of schedule by date Play items with white background represent normal play scope and conflicting play items Copyright O 2008 DynaScan Technology Corp 56 overlapped are highlighted with yellow Advance Setup of Play Item Click Advance button in editing section to set up special parameters for a play item All modifications made in Advance will be applied to play items without the need to press the Modify button Continuous Play Items will switch to a window similar to the AP3 preview player without options of play type and play mode After setup click OK complete setup or Cancel cancel setup to complete operation Ot
136. urn off Note When Excool is enabled click Power Off once to start Excool function with LED modules off Click Power Off a second time to skip Excool function and turn off the motor first with LED modules on The LED modules will automatically be turned off when motor comes to a stop Click Power Off a third time to turn LED modules off Note The action may cause Monitor System Schedule to pause unless released or AP3 restarted Copyright O 2008 DynaScan Technology Corp 78 Force Power On After the display is manually powered off a cool down countdown display and button will appear in the interface The user can click Force Power On to start the display before the countdown has completed but it is not recommended EW Monitos Syrias Operaios esa Peri fi u r Protocol Vea esoo Powe On Peret DE Spm Speed Feed i f r Coop Acdeet Fad Ree A A Display haie HET A bata Em MTS GIO Peers E A A c AD 100 0120 0020 0020 020 EN EH EEE Note Forcing Power On when the screen has not come to a complete stop can damage the display The cool down time will vary depending on which model is in use Note This action will cause the Monitor System Schedule to stay paused until it is released or AP3 is restarted Monitor System Schedule Suspend Some operations will conflict with the schedule settings When a conflict happens a warning message will be shown WARNING
137. wo ends of a RS 232 Jumper with the COM Port When the signal has successfully connected at both ends a light in the left lower corner of Message Editor v3 0 will turn green from red Editing terminal can adopt three functions to adjust the marquee including Visible Soeed and Space Click Update Message to send out the message after editing has completed Copyright 2008 DynaScan Technology Corp 150 6 8 Billing Report Functions This is to Summarize and display the billing recorded files provide a function for quick searching and export csv file to be exported to an Excel file Configure layout alt xd O Prie Fer Trop Dalr 1 gt 4 E 4 J gt 4 gt H F Es 1 io 1 12 13 18 ZE 10 41 12 13 14 te 7 ee ee es 22m Tew ane Hua Tw wm NW Hn aT mw wm Ww in 25 tada 1A SOON H T Meda DADO MA i A TA ee be 1515 SU 2s ee de ad ee e zi 1 ALLI 2 Pista File UCase ag al Mechs Ple EOULontie Lineal peg i Mecha Fie E Corr Deel my DECIA 1174 Ua Le i AMT ANT ODES SOOT Oe So Ene NES HTEO AE Ae a 11035 MES HZ AAA SOTA oe a 2 Fetal Coat E Main function buttons Content Displays the page of material list Option A page of environment settings Label 1 Function Button Section Start Stop Date Sets a start end date of the displayed enquiry Machine List Selects play equipment Identify List Selects play image Query Enquires information Export File Exports Excel file
138. ypes are supported Media File Capture and Picture Default is set as disable Background Sequences will not be preloaded when Schedule content ends Sequence in Schedule Preload lf enabled the Schedule play will preload next play content to reduce transition time Three file types are supported Media File Capture and Picture Default is set as disable Background Sequences will not be preloaded when Schedule content ends External Browser Enable You can reduce the memory accumulation when playing Flash Power Point or Web Page by enabling external browser The default is set as disable Machine Description Input the description of the machine computer Description will be used when it sending an email to the users lt will also appear on the Caption of APS3 It will be valid immediately after press Enter on keyboard Copyright O 2008 DynaScan Technology Corp 71 Opin TERT Copyright 2008 DynaScan Technology Corp 72 5 7 2 Startup Run n JA fre ds Sinstup Fun Late Satire Mi pra caries Esta Et E har ar Ara STP Stare Pee Control Hie Hirra lool Pater teal EAT BE Wied JO 43 AA Content The program will automatically play appointed play type when AP3 starts up The default is set as None automatic play disabled Currently the function provides four play types including Capture Sequence Schedule and Layout Setting will take effect after restarting AP3 Se

- DynaScan

Contents

Download Pdf Manuals

Related Search

Related Contents