Home

- geotogether

image

Contents

1. the 6 on the display is flashing please refer to the online user manual For a LED sensor 1 Da 3 Find the pulse output on your meter Stick the square velcro around the pulse output on the meter Place the LED sensor over the square velcro on the meter ensuring that the GEO logo is facing you Insert the other end of the LED cable in to the socket in the bottom of the transmitter and ensure it is fully inserted Check the imp kWh value on your meter configure this on your display Refer to the user manual for futher information G4 bes 1S4 bes Pulse output Imp kWh EENE A QSG D 9 a
2. Wh a eo GreenEnergyOptions Display pack Web pack Smart plug pack Ensemble colour display QUICK START GUIDE DISPLAY 1 per pack TRANSMITTER 1 per pack SENSORS LED sensor 1 per pack Mains sensor OR 1 or 3 per pack energynote co uk start SAFETY FIRST A ts EH PB C Your safety is very important to us Please read the follovving guidelines before installation Sensors Do not install the sensor if There is not enough cable for the clip to connect correctly The cable is too wide for the sensor do not force the sensor The cables appear perished cracked burned bare copper is visible loose or wet You have any doubts about the condition of the cables meter Display Follow all manufacturers guidelines when installing your display Keep your display away from water liquids Always disconnect before cleaning clean with a soft dry cloth only Contact your supplier if any of the components appear damaged faulty STEP 3 SENSORS For a single phase pack one mains sensor 1 Atyour electricity meter clip the sensor around the mains live cable please refer to the online user manual for examples of live cables on the meter You should hear a click to indicate the sensor has been tightly closed Insert the other end of the sensor cable in to the socket in the bottom of the transmitter and ensure it is fully inserted The display will now start to show th
3. e energy you are consuming STEP 1 DISPLAY Insert and twist clockwise to clip the 2 pinned EU or 3 pinned UK plug to your power supply and connect it to your display Your display will turn on automatically when you plug it into the mains supply Whenever the display is turned ON you will see the set clock screen Use the left and right buttons on the front of the display to adjust the time and date then press the middle set button when you have finished For a three phase pack three mains sensors 1 At your electricity meter clip the sensors around the mains live cables attach one sensor per cable please refer to the online user manual for examples of live cables on the meter You should hear a click to indicate that the sensors have been securely fastened Insert the other end of the cable in to the socket in the bottom of the transmitter and ensure it is fully inserted Your display will now start to show the energy you are consuming For any help please visit our online user manual at www greenenergyoptions co uk ensemble colour STEP 2 TRANSMITTER 1 Open the transmitter unit by pressing the button and pulling the outer cover away from the bottom Remove the battery tab from the transmitter The red light will flash to show that the unit is working On the display the will light to show that it is talking to the transmitter If

Download Pdf Manuals

image

Related Search

Related Contents

  KitchenAid KECD806RSS05 User's Manual  Parts, Operation & Installation Manual 06/2008 (Rev.E)  SMAN2 Manifold Digital com 3 Portas  Bedienungsanleitung  Assignment 7    く 目 ワッディは正常な使用法で、かつ定期的なメンテ 縄ー央 ヨ 永くお  CONTRAT CADRE LICENCE DE LOGICIEL  STREX Cell Strain Instrument User Manual  

Copyright © All rights reserved.
Failed to retrieve file