Legend 330SR Spot User Manual
Contents
1. a 9 POC SUN ch sae E ae 9 Procedure ee n H 10 Talee iom the Lamp c n 10 E E TTD NETTE 11 WI EGO B ROTE ETT ERE TT Tx 11 PIONO PIE 11 Proc o Ia ep 11 AO DOT AN TEE 12 Control Panel Description sese eee eee e 12 Ee BABES eT 12 CONNOKODEIONS sese T 12 POO Fenn TT ROREM 12 Ment WA 13 Men GOL coste E dO KE ap 14 BMA FUNCIONS DP p S 15 sidejo Peja Inl goo m a EEN 15 kamp nala D aides ease 16 5 T RN 17 F DO UNE a 17 NAONA e nu 17 ASH s EG 18 SPECIAL i EE LL TT 19 ONISEMI0062. 1 1 l L PROFESSIONAL Edition Notes Edition Notes Trademarks Copyright Notice Manual Use Document Printing Intended Audience Disclaimer Document Revision Tn PROFESSIONAL The Legend 330SR Spot User Manual Rev 5 covers the description safety precautions installation programming operation and maintenance of the Legend 330SR Spot Chauvet released this edition of the Legend 330SR Spot User Manual in April 2015 CHAUVET is a registered trademark of CHAUVET 8 Sons Inc d b a CHAUVET or Chauvet The CHAUVET logo in its entirety including the CHAUVET name and the dotted triangle and all other trademarks in this manual pertaining to services products or marketing statements are owned or licensed by CHAUVET Any other product names logos brands company names and other trademarks featured or referred to within this document are the property of their respective trademark holders Chauvet owns the content of this User Manual in its entirety including but not limited to pictures logos trademarks and resources Copyright 2015 Chauvet All rights reserved Electronically published by Chauvet in the United States of America Chauvet authorizes its customers to download and print this manual for professional information purposes only Chauvet expressly prohibits the usage copy storage distribution modification or printing of this manual or its content for any other purpose with
3. 16 Zoom 22 000 0 255 0 100 Legend 330SR Spot User Manual Rev 5 DMX Values cont Model 21 Channel Function Percent Setting cont No function Prism insert Effect 1 gobo 1 clockwise prism spin Effect 1 gobo 2 clockwise prism spin Effect 1 gobo 3 clockwise prism spin Effect 1 gobo 4 clockwise prism spin Effect 1 gobo 5 clockwise prism spin Effect 1 gobo 6 clockwise prism spin Effect 1 gobo 7 clockwise prism spin Effect 1 gobo 8 clockwise prism spin Effect 1 gobo 1 rotate clockwise prism spin Effect 1 gobo 2 rotate clockwise prism spin Effect 1 gobo 3 rotate clockwise prism spin Effect 1 gobo 4 rotate clockwise prism spin Effect 1 gobo 5 rotate clockwise prism spin Effect 1 gobo 6 rotate clockwise prism spin Effect 1 gobo 7 rotate clockwise prism spin Effect 1 gobo 8 rotate clockwise prism spin Effect 2 gobo 1 counter clockwise prism spin Effect 2 gobo 2 counter clockwise prism spin Effect 2 gobo 3 counter clockwise prism spin Effect 2 gobo 4 counter clockwise prism spin Effect 2 gobo 5 counter clockwise prism spin Effect 2 gobo 6 counter clockwise prism spin Effect 2 gobo 7 counter clockwise prism spin Effect 2 gobo 8 counter clockwise prism spin Effect 2 gobo 1 rotate counter clockwise prism spin Effect 2 gobo 2 rotate counter clockwise prism spin Effect 2 gobo 3 rotate counter clockwise prism spin Effect 2 gobo 4 rotate counter clockwise prism spin Effect 2 gobo 5 rotate counter clockwise prism spi
4. 06010897 Voltage Selection Auto ranging 230 VAC 50 Hz 495 W 2 3A 10 A 250 V Worldwide Neutrik powerCON A Bare wired Lifespan 1 500 hours Max Thickness 1 3 Channel Range 21 or 27 UPC Number 781462211530 781462212452 RoHS Legend 330SR Spot User Manual Rev 5 User Manual Returns You must send the product prepaid in the original box and with the original packing and CONTACT Us accessories Chauvet will not issue call tags Call Chauvet and request a Return Merchandise Authorization RMA number before shipping the product Be prepared to provide the model number serial number and a brief description of the cause s for the return Clearly label the package with an RMA number Chauvet will refuse any product returned without an RMA number 2 DO NOT write the RMA number directly on the box Instead write it on a properly affixed label Once you have received the RMA number include the following information on a piece of paper inside the box Your name Your address Your phone number The RMA number A brief description of the problem s Be sure to pack the product properly Any shipping damage resulting from inadequate packaging will be the customer s responsibility FedEx packing or double boxing is recommended 1 Chauvet reserves the right to use its own discretion to repair or replace returned product s WORLD HEADQUARTERS Chauvet General I
5. 330SR Spot includes two gobo wheels 8 rotating gobos plus open on wheel 1 and 14 fixed gobos plus open on wheel 2 The diagram shows the gobo number on the wheel as numbered in the DMX Values tables 17 8 mm 14 0 mm Gobo Wheel 1 Gobo Dimensions Gobo Wheel 1 Gobo Wheel 2 a The gobos on Gobo Wheel 2 are not removable Legend 330SR Spot User Manual Rev 5 7 Setup Color Wheel The Legend 330SR Spot includes one color wheel with 7 fixed colors plus open white as indicated below The diagram shows the color number on the wheel as numbered in the DMX Values tables 8 Legend 330SR Spot User Manual Rev 5 Setup Lamp Replacement The Legend 330SR Spot is equipped with an Osram Sirius 330W X8 lamp Follow the procedure below to safely change the lamp N Disconnect the product from power before opening Procedure 1 Turn the product off and disconnect it from power Wait at least 15 minutes for the lamp to cool down Legend 330SR Spot User Manual Rev 5 9 Setup Procedure 4 Take note as to the orientation of the lamp Vent holes on the front of the lamp should Cont align horizontally with the air vents on the lamp frame This is extremely important for lamp cooling when replacing the lamp see step 5 for location of vents on the lamp Using the lamp base push the lamp down against the spring clips and then roll the lamp out the top 71 MN C m
6. lt UP gt lt DOWN gt HAVI PROFESSIONAL Function Exits from the current menu or function Enables the currently displayed menu or sets the currently selected value in to the current function Navigates upward through the menu list or increases the numeric value when in a function Navigates downward through the menu list or decreases the numeric value when in a function The Legend 330SR Spot features a backlit liquid crystal display LCD that provides information regarding the product s settings and status In addition the LCD can be inverted This allows ease of reading the display whether the product is positioned on the floor or hanging from a truss Upon power up the LCD will show the Legend logo and the product identification After completing the power up tests the LCD will show the DMX address the DMX mode and the temperature along with a warning sign if the tests have detected an error 2 Press lt ENTER gt to read the corresponding error message see Error Messages in the Technical Information section To clear the error messages press lt ENTER gt while they show on the display You can set the Legend 330SR Spot starting address in the 001 512 DMX range This enables control of up to 18 products in the 27 channel Modez personality Refer to the Menu Map to understand the menu options The menu map shows the main level and a variable number of programming levels for each option To enter programm
7. 255 Fast to slow 6 Dimmer 0000 255 0 10096 7 FineDimmer 7 0000 255 0 100 No function Slow to fast strobe 8 Fast close slow open Slow close fast open Slow to fast pulse effect Random strobe Open Open Color 1 Color 2 Color 3 Color 4 9 Color Wheel Color 5 Color 6 Color 7 Index split color Clockwise rotation fast to slow Stop Counter clockwise rotation slow to fast 10 000 0 255 0 100 11 000 0 255 0 100 12 000 0 255 0 100 000 0 254 Fast to slow 13 Speed 255 Fast Legend 330SR Spot User Manual Rev 5 25 Operation DMX Values cont Modez 27 Channel cont 15 17 26 Function Gobo Wheel 1 Gobo Wheel 1 Rotate Gobo Wheel 2 Open Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Stop Index split gobo Stop Open Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 9 Gobo 10 Gobo 11 Gobo 12 Gobo 13 Gobo 14 Stop Focus 77 0000 255 0 100 Zoom 000 0 255 0 100 Percent Setting Gobo 1 8 bounce Clockwise rotation fast to slow Counter clockwise rotation slow to fast Clockwise rotation fast to slow Counter clockwise rotation slow to fast Gobo 1 14 bounce Clockwise rotation fast to slow Counter clockwise rotation slow to fast Legend 330SR Spot User Manual Rev 5 DMX Values cont Modez 27 Channel Function Percent Setting comt No function Prism insert E
8. DMX B User Serviceable X X Master Slave Read all the following Safety Notes before working with this product These notes include important information about the installation usage and maintenance of this product This product contains no user serviceable parts Any reference to servicing in this User Manual will only apply to properly trained Chauvet certified technicians Do not open the housing or attempt any repairs All applicable local codes and regulations apply to proper installation of this product Avoid direct eye exposure to the light source while the product is on Always disconnect this product from its power source before servicing Always connect this product to a grounded circuit to avoid the risk of electrocution Do not touch this product s housing during operation because it may be very hot This product is for indoor use only To prevent risk of fire or shock do not expose this product to rain or moisture IP20 CAUTION When transferring product from extreme temperature environments e g cold truck to warm humid ballroom condensation may form on the internal electronics of the product To avoid causing a failure allow product to fully acclimate to the surrounding environment before connecting it to power Mount this product in a location with adequate ventilation at least 20 in 50 cm from adjacent surfaces This product weighs 47 Ib 21 3 kg Always ask for help when mounting this product to avoid personal in
9. Mr d Lamp Cooling Vents 7 6 Reverse the steps above to install the new lamp Do not touch the glass with bare hands RISK OF LAMP EXPLOSION Vent holes on the front of the lamp should align horizontally with the air vents on the lamp frame This is extremely important for lamp cooling N Do not turn product on without a lamp Increasing the Lamp s Vent holes on the front of the lamp should align horizontally with the air vents Life on the lamp frame This is extremely important for lamp cooling ALWAYS turn the lamp off by using the DMX controller or the product s control panel then wait at least 5 minutes before switching off the product This will keep the fans running to extract any remaining heat from the product s head DO NOT power cycle the product unless it is necessary DO NOT re strike the lamp immediately after turning it off Chauvet recommends waiting 5 minutes before trying to re strike the lamp DO NOT touch the lamp without wearing gloves to avoid leaving grease on the bulb or on the contacts that could reduce the lamp s life ALWAYS change the lamp when it has reached its recommended lifespan to avoid the risk of lamp explosion 400000 SS Legend 330SR Spot User Manual Rev 5 Setu 2 Mounting Before mounting this product read and follow the Safety Notes For our Chauvet line of mounting clamps go to http trusst com producis Orientation Always mount this product in a safe posi
10. Reset Functions From the Main Menu highlight Reset and press lt ENTER gt a You can leave this sub menu at any time by pressing MENU or selecting NO Pan Tilt Reset Highlight Pan Tilt and press lt ENTER gt a Select YES to reset the pan and tilt movements to their home positions b Accept the selected option Shutter Reset Highlight Shutter and press lt ENTER gt a Select YES to reset the shutter to the home position b Accept the selected option Color CMY Reset Highlight Color CMY and press ENTER a Select YES to reset the color wheel and the CMY filters to their home positions b Accept the selected option Gobo lris Reset Highlight Gobo lris and press ENTER a Select YES to reset the gobo wheels and Iris to their home positions b Accept the selected option Zoom Frost Focus Prism Highlight Zoom Frost Focus Prism and press lt ENTER gt Reset a Select YES to reset the zoom focus prism and frost to their home positions b Accept the selected option Reset All Highlight All and press ENTER a Select YES to reset all moving optical parts and the moving head to their home positions b Accept the selected option 18 Legend 330SR Spot User Manual Rev 5 Special Functions From the Main Menu highlight Special Functions and press lt ENTER gt Fixture Maintenance Timers 1 Highlight Fixture Maintenance and press ENTER the current maintenance interval and remaining time will show 2 c
11. fast to slow Stop Counter clockwise rotation slow to fast 000 U 063 Wide to narrow 21 Iris 064 U 127 lris effect slow to fast 128U 191 lris effect out slow in fast 192 0 255 effect in slow out fast 19 Prism Wheel 20 Prism Rotation Legend 330SR Spot User Manual Rev 5 27 Operation DMX Values cont Modez 27 Channel Function Value Percent Setting cont 22 Frot X 0000 255 0 100 No function Macro 1 Macro 2 Macro 3 Macro 4 Macro 5 Macro 6 Macro 7 Macro 8 Macro 9 Macro 10 Macro 11 Macro 12 Macro 13 Macro 14 Macro 15 Macro 16 Macro 17 Macro 18 Macro 19 Macro 20 Macro 21 Macro 22 Macro 23 Macro 24 Macro 25 Macro 26 Macro 27 Macro 28 Macro 29 Macro 30 Macro 31 23 Pan Tilt Macro 000 U 021 No function 022 042 Color 1 043 U 063 Color 2 064 0 085 Color 3 086 U 106 Color 4 107 U 127 5 128 0 148 Color 6 149 U 170 Color 7 171 U 191 Color 8 192 0 212 Color 9 213 U 233 Color 10 234 U 255 Color 11 25 Preset Color 28 Legend 330SR Spot User Manual Rev 5 Operation DMX Values cont Modez 27 Channel Function cont 26 Color Macro 27 Control Percent Setting No function Color Macro 1 Color Macro 2 Color Macro 3 Color Macro 4 Color Macro 5 Color Macro 6 Color Macro 7 Color Macro 8 Color Macro 9 Color Macro 10 Color Macro 11 Color Macro 12 No function Pan tilt blackout mode enabled Pan tilt blackout mode
12. 1 ea o dd ieee aia te 19 Ea 5 dale gig se TTT 19 OU WE H cC RT 21 DVX YASS GON ep vYA 22 Legend 330SR Spot User Manual Rev 5 i Table of Contents CHAUVET BMX cep TTT 23 BMX COM TT 24 BMX Vales CONT a bk EET EET 25 DII waluss COM e e a Mu LE M EE 26 DII VA USS S qu Meu MEE 27 DII VAalUSS RH THT 28 DII WSS THH 29 S sty Te 30 EIGHT DTE e e n te Ba UM te 30 MESSAGE LNS rna anol HHE E HE o Lee a 31 6 Technical SOCCINC Le 32 Y Saisie ard ce ET 33 COINS tag e NT cu E 33 ij Legend 330SR Spot User Manual Rev 5 Before You Begin 1 BEFORE YOU BEGIN What le Legend 330SR Spot Neutrik powerCON power cord Included 2 Omega brackets with mounting hardware Warranty Card Quick Reference Guide Claims Carefully unpack the product immediately and check the box to make sure all the parts are in the package and are in good condition If the box or the contents the product and included accessories appear damaged from shipping or show signs of mishandling notify the carrier immediately not Chauvet Failure to report damage to the carrier immediately may inv
13. 30SR Spot is a compact electronic moving yoke beam product equipped with a 330 watt X8 lamp It includes a color wheel with 7 colors plus white It also includes a rotating 3 facet prism frost remote focus and 2 gobo wheels for gobo morphing Features Compact moving yoke spot fixture with zoom optics and motorized focus Virtually silent operation for use in any situation Precision optics for crisp even gobo projections Variable frost for wash style effects 3 facet rotating prism with zoom for stunning effects Fast precise pan and tilt movement Color wheel 7 colors 4 Open white CTO Split linear colors Rainbow color spin at variable speed Gobo wheel 1 8 gobos 4 metal 4 glass Open Rotating interchangeable indexing slot n lock Gobo wheel spin at variable speed Gobo wheel 2 14 gobos Open Gobo wheel spin at variable speed 3 facet rotating prism CMY color mixing system with vector speed adjustments DMX channels 21 or 27 Pan 540 Tilt 270 Reset over DMX Electronic power supply Mechanical dimmer Neutrik powerCON power input 3 and 5 pin DMX input and output connectors Legend 330SR Spot User Manual Rev 5 3 Introduction Overview Top View Side View 4 LegendTM 330SR Spot User Manual Rev 5 Dimensions 22 01 in 15 12 in 428 384 P 22 01 in 559 mm Y a 17 13 in 435 F 13 54 in 344 mm Y 15 12 in a 10 63 in 384 mm 270 mm A 25 55 in 6
14. 49 mm 19 80 in 503 mm Y Y Legend 330SR Spot User Manual Rev 5 5 Setup 3 SETUP AC Power A D AC Plug Fuse Replacement A DMX Linking DMX Personalities Tn PROFESSIONAL Each Legend 330SR Spot has an auto ranging power supply that works with an input voltage range of 100 to 240 VAC 50 60 Hz To determine the power requirements for each Legend 330SR Spot refer to the label affixed to the product You can also refer to the Technical Specifications chart in this manual The listed current rating indicates the maximum current draw during normal operation For more information you may download Sizing Circuit Breakers from the Chauvet website www chauvetprofessional com Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire To eliminate unnecessary wear and improve its lifespan during periods of non use completely disconnect the product from power via breaker or by unplugging it Never connect this product to a rheostat variable resistor or dimmer circuit even if the rheostat or dimmer channel serves only as a 0 to 100 switch The Legend 330SR Spot comes with a power input cord terminated with a Neutrik powerCONQG A connector on one end and has been left bare wired on the other end Use the table below to wire a new plug Connection Wire U S Wire Europe Screw Color AC Live Yellow or Brass AC Neutra Si
15. RETT EO 1 cH ccr 1 PIOQUSCALA GIANCE LETS 2 1 2 BEISONII S cim 2 Mounting And RIGGING Site TT SS ka SO 2 iol siad ARLA Mid aor 2 Operaio 2 25 NUO dUCHU ON SETTE ITE ED cute e a EJE e UI 3 DOS CAD HOR TTT 3 SIT CE DTE ERE 3 al 4 Riant 5 DOU WO AEA E yeu 6 OA PE M LM ML Mu 6 RN NM a e EEN e bn e 6 PUSS iced mm c 6 DI PUB a Tale eMe EP 6 DMX eee T Nec 6 ODO WACO 7 ODO IR TREE 7 H E pas aa da 7 iia th 8 PAIN DIAC PI AGE NEN
16. alidate your claim In addition keep the box and contents for inspection For other issues such as missing components or parts damage not related to shipping or concealed damage file a claim with Chauvet within 7 days of delivery Manual Convention Meaning Conventions 1 512 A range of values in the text 50 60 A set of mutually exclusive values in the text lt SET gt A button on the product s control panel Settings A product function or a menu option MENU gt Settings A sequence of menu options 1 10 A range of menu values from which to choose in a menu Yes No A set of two mutually exclusive menu options in a menu ON A unique value to be entered or selected in a menu Symbols Symbols Meaning Critical installation configuration or operation information Failure to comply with this information may cause the product not to work damage third party equipment or cause harm to the operator Important installation or configuration information Failure to comply with this information may keep the product from working Useful information 2 The term DMX used throughout this manual refers to the USITT DMX512 A digital data transmission protocol Legend 330SR Spot User Rev Before You Begin Product At A Glance Safety Notes A D Personal Safety Mounting And Rigging Power And Wiring Operation Use on Dimmer Auto Programs X X Auto Ranging Power Sound Activated Replaceable Fuse p
17. an Select Cyan and press lt ENTER gt a Select the new value 000 255 b Accept the new value Magenta Select Magenta and press ENTER a Select the new value 000 255 b Accept the new value Yellow oelect Yellow and press ENTER a Select the new value 000 255 b Accept the new value Legend 330SR Spot User Manual Rev 5 19 Operation Gobo R Gobo Gobo 2 Iris Prism R Prism Zoom Focus Frost 20 Select Gobo and press lt ENTER gt a Select the new value 128 127 b Accept the new value Select R Gobo and press lt ENTER gt a Select the new value 128 127 b Accept the new value Select Gobo 2 and press lt ENTER gt a Select the new value 128 127 b Accept the new value Select Iris and press lt ENTER gt a Select the new value 000 255 b Accept the new value Select Prism and press lt ENTER gt a Select the new value 000 255 b Accept the new value Select R Prism and press ENTER a Select the new value 128 127 b Accept the new value Select Zoom and press ENTER a Select the new value 000 255 b Accept the new value Select Focus and press lt ENTER gt a Select the new value 000 255 b Accept the new value Select Frost and press ENTER a Select the new value 000 255 b Accept the new value Legend 330SR Spot User Manual Rev 5 DMX Values Mode1 21 Channel Func
18. an wiring Clean vents Proceed with maintenance and reset timer send product for repair Check sensor s wiring and position send product for repair Check moving head s free movement Check sensors wiring and position Send product for repair Check part s free movement and integrity Check sensors wiring and position Send product for repair ie Technical Information 6 TECHNICAL SPECIFICATIONS Dimensions and Weight Power Light Source Gobo Dimensions Photometrics Thermal DMX Ordering 32 Length 13 5 in 344 mm Width 17 1 in 435 mm Height 25 5 in 649 mm v Mi PROFESSIONAL Weight 47 Ib 21 3 kg Note Dimensions in inches rounded to the nearest decimal digit Power Supply Type Switching internal Parameter Consumption Current Fuse Power Power input connector Power cord plug Type HRI Gobo Wheel 1 Outside Diameter 17 8 mm Parameter 5 m 5 m Beam angle Max External Temperature 113 F 45 Connectors 3 and 5 pin XLR Product Name Legend 330SR Spot Legend 330SR Spot 2 pack in flight case Range 100 240 VAC 50 60 Hz 120 VAC 60 Hz 514 W 4 3A 10 A 250 V U S Canada Neutrik powerCON A Bare wired Power 330 W Image Diameter 14 0 mm Standard Optics 62 200 lux 5 4 110 lux 24 59 249 Cooling System Fan Cooled Connector Type Sockets Item Code 06010805
19. d press lt ENTER gt i The lamp will not turn on if the ambient temperature is 104 F 40 C or higher Lamp On Off 1 Highlight On Off 2 Toturn the lamp on or off press ENTER a Select ON to turn the lamp on or OFF to turn the lamp off b Accept the selected option Lamp Status During Power 1 Highlight State Power On On2 Tochange the lamp status during power on press ENTER a Select ON to turn on the product and the lamp simultaneously or OFF to turn on the product without turning on the lamp b Accept the selected option Remote Turn Off 1 Highlight Off Via DMX 2 To enable disable remote turn off press ENTER a Select YES to enable product turn off from either a DMX controller or its power switch or NO to turn the product off only from its power switch b Accept the selected option Lamp On if DMX Present 1 Highlight On if DMX On 2 Toturn the lamp on when DMX is present press ENTER a Select YES to turn the lamp on if DMX signal is present or NO to turn the lamp on only from the control panel b Accept the selected option Lamp Off if DMX Absent 1 Highlight Off if DMX Off 2 Toturn the lamp off when DMX is absent press ENTER a Select YES to turn the lamp off if DMX signal is absent or NO to turn the lamp off only from the control panel b Accept the selected option Lamp Strike Delay 1 Highlight Ignition Delay 2 To set the lamp strike delay press ENTER a Select the d
20. disabled Color wheel change blackout mode enabled Color wheel change blackout mode disabled Gobo change blackout mode enabled Gobo change blackout mode disabled Lamp on Pan tilt reset Color CMY reset Gobo iris reset Shutter dimmer reset No function Frost focus reset d Reset all 2100 219 Color gobo pan tilt change blackout mode enabled 220 U 229 Color gobo pan tilt change blackout mode disabled 230 U 239 Lamp off 240 U 255 No function 29 Legend 330SR Spot User Manual Rev 5 NA CHAUVET Technical Information 5 TECHNICAL INFORMATION Product 70 Maintain optimum performance and minimize wear you should clean this product frequently Usage environment contributing factors determining the cleaning Maintenance frequency s a rule clean this product at least twice a month Dust build up reduces light output performance and can cause overheating This can lead to reduced light source life and increased mechanical wear To clean your product 1 Unplug the product from power 2 Wait until the product is at room temperature Use a vacuum or dry compressed air and a soft brush to remove dust collected on the external vents 4 Clean all external surfaces with a mild solution of non ammonia glass cleaner or isopropyl alcohol 5 Apply the solution directly to a soft lint free cotton cloth or a lens cleaning tissue 6 Wipe any dirt or grime to the outside edges of the le
21. elay before the lamp strikes after power up in seconds 08 2555 b Accept the new value Fixture Shut Off Delay 1 Highlight Low Power Delay 2 set the lamp shut off delay press ENTER a Select the delay before the product powers off after lamp off in seconds 08 2555 b Accept the new value 1 Legend 330SR Spot User Manual Rev 5 T T Display Settings From the Main Menu highlight Display Settings and press lt ENTER gt Overturn Display 1 Highlight Display Inverse 2 overturn the display press ENTER a Select YES to turn the LCD around or NO to keep the normal LCD view b Accept the selected option LCD Backlight Off 1 Highlight Backlight Auto Off 2 To configure the LCD backlight press ENTER a Select YES to automatically turn the LCD backlight off after 1 minute or NO to keep the LCD backlight always on b Accept the selected option Backlight Brightness 1 Highlight Backlight Intensity 2 To set the backlight brightness press lt ENTER gt a Select the backlight brightness 1 10 1 being the darkest and 10 the brightest b Accept the new value Temperature Unit 1 Highlight Temperature Unit 2 To select the temperature unit press lt ENTER gt a Select C to show the temperature in the Celsius scale or F to show the temperature in the Fahrenheit scale b Accept the selected option Fixture Tests From the Main Menu highlight Display Settings and press ENTER Automatic Fix
22. ept the selected option Reverse Tilt Direction 1 Highlight Tilt Inverse 2 To reverse the tilt direction press ENTER a Seleci YES to reverse the tilt direction or NO to use the normal tilt direction b Accept the selected option P T Feedback 1 Highlight P T Feedback 2 To select whether the product will auto correct itself when pan tilt is knocked out of position press ENTER a Select YES to turn on the auto correct or NO to turn off the auto correct b Accept the selected option Head Motion Blackout 1 Highlight Bl o P T Moving 2 To black out the output when the head moves press ENTER a Select YES to black out the output when the head tilts or pans or NO to keep the output on while the head moves b Accept the selected option Color Change Blackout 1 Highlight Bl o Color Change 2 To black out the output when the color wheel changes press ENTER a Select YES to black out the output during a color change or NO to keep the output on to see the color changing b Accept the selected option Gobo Change Blackout 1 Highlight Bl o Gobo Change 2 To black out the output when the gobo wheel changes press ENTER a Select YES to black out the output during a gobo change or NO to keep the output on to see the gobo changing b Accept the selected option Legend 330SR Spot User Manual Rev 5 15 PROFESSIONAL Operation Lamp Settings From the Main Menu highlight Lamp Settings an
23. ffect 1 gobo 1 clockwise prism spin Effect 1 gobo 2 clockwise prism spin Effect 1 gobo 3 clockwise prism spin Effect 1 gobo 4 clockwise prism spin Effect 1 gobo 5 clockwise prism spin Effect 1 gobo 6 clockwise prism spin Effect 1 gobo 7 clockwise prism spin Effect 1 gobo 8 clockwise prism spin Effect 1 gobo 1 rotate clockwise prism spin Effect 1 gobo 2 rotate clockwise prism spin Effect 1 gobo 3 rotate clockwise prism spin Effect 1 gobo 4 rotate clockwise prism spin Effect 1 gobo 5 rotate clockwise prism spin Effect 1 gobo 6 rotate clockwise prism spin Effect 1 gobo 7 rotate clockwise prism spin Effect 1 gobo 8 rotate clockwise prism spin Effect 2 gobo 1 counter clockwise prism spin Effect 2 gobo 2 counter clockwise prism spin Effect 2 gobo 3 counter clockwise prism spin Effect 2 gobo 4 counter clockwise prism spin Effect 2 gobo 5 counter clockwise prism spin Effect 2 gobo 6 counter clockwise prism spin Effect 2 gobo 7 counter clockwise prism spin Effect 2 gobo 8 counter clockwise prism spin Effect 2 gobo 1 rotate counter clockwise prism spin Effect 2 gobo 2 rotate counter clockwise prism spin Effect 2 gobo 3 rotate counter clockwise prism spin Effect 2 gobo 4 rotate counter clockwise prism spin Effect 2 gobo 5 rotate counter clockwise prism spin Effect 2 gobo 6 rotate counter clockwise prism spin Effect 2 gobo 7 rotate counter clockwise prism spin Effect 2 gobo 8 rotate counter clockwise prism spin Index Clockwise rotation
24. hange the maintenance interval timer highlight Interval and press ENTER a Select the new interval 10 300 h in hours b Accept the new value 3 the counter for the remaining time highlight Remain Time and press ENTER a Select Reset Time to reset the timer or Exit to exit without resetting it b Accept the selected option gt It is a good idea to use the Fixture Maintenance timer as a reminder to change the lamp Fixture Defaulting Highlight Factory Setting and press ENTER a Select YES to reset the product to factory default setting or NO to exit without resetting Offset Mode e Offset mode provides fine adjustments for the home position of all the moving parts in the optical path as well as the pan and tilt movements This way when in their home position the moving parts do not show any border or reduce the light output Entering Offset Mode 1 Press MENU to enter the regular Menu mode 2 Press ENTER for more than 3 seconds to enter the Offset mode the Offset mode menu will show Pan Select Pan and press ENTER a Select the new value 128 127 b Accept the new value Tilt Select Tilt and press ENTER a Select the new value 128 127 b Accept the new value Shutter Select Shutter and press ENTER a Select the new value 000 255 b Accept the new value Color Select Color and press ENTER a Select the new value 128 127 b Accept the new value Cy
25. ing mode press any key on the control panel to wake the opening screen Press lt MENU gt until you see one of the main level options To highlight a menu option or to change a setting press lt UP gt or lt DOWN gt To change menu levels as shown in the Menu Map press lt ENTER gt or lt MENU gt This is equivalent to moving right and left of the Menu Map respectively To accept the current or new value press lt ENTER gt To return to the previous menu without making changes press lt MENU gt To exit programming mode press MENU until you see one of the main level options the opening screen or do not press any button for 30 seconds and the screen will automatically revert to the opening screen Legend 330SR Spot User Manual Rev 5 NAL O pera tion Menu Map Main Level Programming Levels Description DMX Address 001 512 Selects a starting DMX address 21 Selects the 21 channel DMX mode DMX Functions DMX Channel Mode Modez 27 Selects the 27 channel DMX mode View DMX Value Shows current DMX values for each channel Pan Inverse Defines the direction of the pan function Tilt Inverse Defines the direction of the tilt function P T Feedback Defines auto correct function Fixture Setting No Bl o P T Moving Defines the pan tilt move in black delay Bl o Color Change Defines the color change move in black delay Bl o Gobo Change Defines the gobo change move in black delay On Off Turns lamp on off State Powe
26. juries or damage to the product Make sure there are no flammable materials close to this product while it is operating Always carry this product by the handles Do not carry from the head When hanging this product always secure to a fastening device using a safety cable Always make sure you are connecting this product to the proper voltage in accordance with the specifications in this manual or on the product s specification label Never connect this product to a dimmer pack or rheostat Never disconnect this product by pulling or tugging on the power cable Do not operate this product if you see damage to the housing lenses ultraviolet filter or cables Have the damaged parts replaced by an authorized technician at once To eliminate unnecessary wear and improve its lifespan during periods of non use completely disconnect the product from power via breaker or by unplugging it Do not cover the ventilation slots when operating to avoid internal overheating Do not aim this product toward the Sun The lenses could concentrate the solar energy and cause internal overheating The maximum ambient temperature is 113 F 45 C Do not operate this product at a higher temperature In case of a serious operating problem stop using this product immediately In the unlikely event that your Chauvet product may require service contact Chauvet Technical Support Legend 330SR Spot User Manual Rev 5 2 INTRODUCTION Description Legend 3
27. n Effect 2 gobo 6 rotate counter clockwise prism spin Effect 2 gobo 7 rotate counter clockwise prism spin Effect 2 gobo 8 rotate counter clockwise prism spin Index Clockwise rotation fast to slow Stop Counter clockwise rotation slow to fast Wide to narrow Iris effect slow to fast 17 Prism Wheel 18 Prism Rotation 19 Iris effect out slow in fast Iris effect in slow out fast 20 Frost 0 100 Legend 330SR Spot User Manual Rev 5 23 Operation DMX Values cont Modet 21 Channel Function cont 21 Control 24 Value 000 U 070 U 080 U 090 U 100 U 110 U 120 U 130 U 140 U 150 U 160 U 170 U 180 U 190 U 200 U 210 U 220 U 230 U 240 U Percent Setting No function Pan tilt blackout mode enabled Pan tilt blackout mode disabled Color wheel change blackout mode enabled Color wheel change blackout mode disabled Gobo change blackout mode enabled Gobo change blackout mode disabled Lamp on Pan tilt reset Color CMY reset Gobo iris reset Shutter dimmer reset No function Frost focus reset Reset all Color gobo pan tilt change blackout mode enabled Color gobo pan tilt change blackout mode disabled Lamp off No function Legend 330SR Spot User Manual Rev 5 DMX Values cont Modez 27 Channel Function Value Percent Setting 1 Pan 7 0000 255 0 100 2 FinePan 0000 255 0 100 3 000 U 255 0 100 4 Fine Tilt 000 0 255 0 100 5 Pan Tilt Speed 000 U
28. nformation Technical Support Address 5200 NW 108th Avenue Voice 954 577 4455 Press 4 Sunrise FL 33351 Fax 954 756 8015 Voice 954 577 4455 Email tech chauvetlighting com Fax 954 929 5560 Toll free 800 762 1084 World Wide Web www chauvetlighting com UNITED KINGDOM AND IRELAND Chauvet Europe Ltd General Information Technical Support Address Unit 1C Email uktech chauvetlighting com Brookhill Road Industrial Estate Pinxton Nottingham UK World Wide Web www chauvetlighting co uk NG16 6NT Voice 44 0 1773 511115 Fax 44 0 1773 511110 MEXICO Chauvet Mexico General Information Technical Support Address Av Santa Ana 30 Email servicio chauvet com mx Parque Industrial Lerma Lerma Mexico C P 52000 World Wide Web www chauvet com mx Voice 52 728 285 5000 CHAUVET EUROPE Chauvet Europe BVBA General Information Technical Support Address Stokstraat 18 Email Eutech chauvetlighting eu 9770 Kruishoutem Belgium World Wide Web www chauvetlighting eu Voice 32 9 388 93 97 Outside the U S United Kingdom Ireland Mexico or Benelux contact the dealer of record Follow their instructions to request support or to return a product Visit our website for contact details Legend 330SR Spot User Manual Rev 5 CHAUVET
29. ns surface 7 Gently polish the lens surfaces until they are free of haze and lint i Always dry the external surfaces thoroughly and carefully after cleaning them N Do not spin the cooling fans while blowing compressed air into them 30 Legend 330SR Spot User Manual Rev 5 Error Messages Message Lamp Startup Fail Temperature Sense Error Lamp Too Hot Low Power Lamp Too Hot Power Off Maintenance Fixture Memory Initial Fail CPU B Error CPU C Error CPU D Error Pan Reset Error Pan Encode Error Tilt Reset Error Tilt Encode Error Dimmer Reset Fail Color Reset Fail Gobo Reset Fail Focus Reset Fail Zoom Reset Fail Frost Reset Fail Cause s The lamp has not started after being struck No communication with temperature sensor Ambient temperature higher than 104 C lamp in low power for safety Ambient temperature higher than 110 C lamp off for safety Fixture Maintenance timer expired Memory chip error No communication with auxiliary CPU Moving head failed to go to home position after power up or fixture reset Indicated moving part failed to go to its home position after power up or fixture reset Legend 330SR Spot User Manual Rev 5 Technical Information Action s Check lamp Check lamp socket and wiring send product for repair Check sensor wiring Check sensor integrity send product for repair Check fans Check fan wiring Clean vents Check fans Check f
30. oom frost focus prism functions to Em Yee homeposition Resets all functions to home position Defin mount of hour ween Interval efines amount of hours betwee maintenance e Shows amount of time remaining in dec cycle EN NND Time Resets maintenance timer Reset Functions Fixture Maintenance Remain Special Functions Time Factory Setting _ N 12 product back to default factory settings Yes MP Legend 330SR Spot User Manual Rev 5 DMX Functions From the Main Menu highlight DMX Functions and press lt ENTER gt a new menu with the DMX functions will open DMX Address 1 Highlight DMX Address 2 To change the current address press ENTER a Change the starting address 001 512 b Accept the new value DMX Mode 1 Highlight DMX Channel Mode 2 To change the current mode press ENTER a Selecta DMX mode Mode1 Mode2 b Accept the selected option View DMX Values 1 Highlight View DMX Value 2 Press ENTER a Scroll along the list to see the values of all the current attributes b Return to the previous menu 4 The list will show either 21 or 27 attributes depending on the current DMX mode Product Settings From the Main Menu highlight Fixture Settings and press ENTER Reverse Pan Direction 1 Highlight Pan Inverse 2 To reverse the pan direction press ENTER a Select YES to reverse the pan direction or NO to use the normal pan direction b Acc
31. out written consent from Chauvet For better results print this document in color on letter size paper 8 5 x 11 in double sided If using A4 paper 210 x 297 mm configure your printer to scale the content accordingly Any person in charge of installing operating and or maintaining this product should completely read through the guide that shipped with the product as well as this manual before installing operating or maintaining this product Chauvet believes that the information contained in this manual is accurate in all respects However Chauvet assumes no responsibility for any errors or omissions in this document Chauvet reserves the right to revise and make changes to the content of this document without obligation that Chauvet notify any person or company of such revision or changes This does not in any way constitute a commitment by Chauvet to make such changes Chauvet may issue a revision of this manual or a new edition to incorporate such changes The Legend 330SR Spot User Manual Rev 5 supersedes all previous versions of this manual Discard any older versions of this manual and replace with this version Go to www chauvetprofessional com for the latest version Author Date Editor Date D Couppe 4 1 15 M Trouard 4 9 15 Legend 330SR Spot User Manual Rev 5 Table of Contents 1 TT 1 Va s Tena iS ooa oo TTT E 1 SUCHBEREICH HE rm 1 B
32. r On gars WA of the lamp when powering Off Via DMX Turns off the unit via DMX controller Lamp Setting On if DMX On Turns lamp on when DMX signal is detected Off if DMX Off Turns lamp off when DMX signal is lost Selects duration of delay between product does power and lamp power on Selects the duration of delay when shutter is ARN DOWEN TEY closed and lamp enters lower power state Display Inverse Defines the direction of the display Display backlight always on Backlight Auto Off Display backlight turns off after 1 minute of Display Setting control panel inactivity Backlight Intensity m D intensity from dim 1 to Temperature Unit Defines how temperature is displayed Legend 330SR Spot User Manual Rev 5 13 Operation Menu Map Cont Main Level Programming Levels Description Auto Test Selects the product s automatic test sequence Fixture Test Manual Test Selects the product s manual test function Fixture Use Time Displays total hours of products use the amount of time the lamp has Fixture Information Lamp On Time e I on Resets lamp timer to 0 Displays the firmware version Pan Tilt Resets pan tilt function to home position se Resets shutter function to home position Color CMY _ e Resets color wheel color flags to home position Gobollris e Resets gobo wheel iris functions to home Yes position Zoom Frost Focus Ne Resets z
33. tion Gn Color Wheel Value 1 Pan 7 0000 255 0 100 Operation Percent Setting FinePan 0000 255 0 100 000 0 255 0 100 000 0 255 0 100 000 0 255 Fast to slow Dimmer 0000 255 0 100 function Slow to fast strobe Fast close slow open Slow close fast open Slow to fast pulse effect Random strobe Open Open Color 1 Color 2 Color 3 Color 4 Color 5 Color 6 Color 7 Index split color Clockwise rotation fast to slow Stop Counter clockwise rotation slow to fast 000 0 255 0 100 10 000 0 255 0 100 11 000 U 255 0 100 12 Gobo Wheel 1 Legend 330SR Spot User Manual Rev 5 000 U 008 U 015 U 022 U 029 U 036 U 043 U 050 U 057 U 064 U 128 U 190 U 194 U 007 Open Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 1 8 bounce Clockwise rotation fast to slow Stop Counter clockwise rotation slow to fast 21 Operation LI DMX Values Cont Model 21 Channel Function Value cont 3 13 14 Gobo Wheel 2 Percent Setting Index split gobo Clockwise rotation fast to slow Stop Counter clockwise rotation slow to fast Open Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 9 Gobo 10 Gobo 11 Gobo 12 Gobo 13 Gobo 14 Gobo 1 14 bounce Clockwise rotation fast to slow Stop Counter clockwise rotation slow to fast 15 Focus 770000 255 0 100
34. tion and make sure there is adequate room for ventilation configuration and maintenance Rigging Chauvet recommends using the following general guidelines when mounting this product When selecting an installation location consider easy access to this product for operation programming adjustments and routine maintenance Make sure to mount this product away from any flammable material as indicated in the Safety Notes Never mount in places where rain high humidity extreme temperature changes or restricted ventilation may affect the product If hanging this product make sure that the mounting location can support the product s weight See the Technical Specifications for the weight bearing requirements of this product When hanging this product always secure to a fastening device using a safety cable Procedure The Legend 330SR Spot comes with a preinstalled mounting surface to which you will be able to attach the 2 included omega brackets Make sure the clamps are capable of supporting the weight of this product Use two mounting points per product In addition use a safety cable to link the product to the structure Mounting Clamp L 7 Safety Cable Mounting Diagram Mounting Surface Floor Mounting Overhead Mounting Legend 330SR Spot User Manual R v 5 li Operation 4 OPERATION Control Panel Description LCD Display Control Options Programming Button lt MENU gt lt ENTER gt
35. ture Test 1 Highlight Auto Test 2 To start the built in test sequence press ENTER gt The automatic fixture test will end after 1 full cycle You can stop the test by 1 pressing MENU Manual Fixture Test 1 Highlight Manual Test and press ENTER 2 Highlight the desired attribute 3 To change the value of the selected attribute press ENTER a Setthe attribute value 000 255 b Accept the new value 4 Repeat steps 2 and 3 for the other attributes 5 When done with the test exit to the previous menu the values of all tested channels will go back to zero Fixture Information From the Main Menu highlight Fixture Information and press ENTER Fixture Operation Timer Highlight Fixture Use Time the accumulated product s operation time will show 4 You cannot modify or reset the fixture operation timer Lamp Operation Timer 1 Highlight Lamp On Time the accumulated lamp s operation time will show 2 Toreset the lamp operation timer press ENTER a Select Reset Time to reset the timer or Exit to exit without resetting b Accept the selected option Firmware Version 1 Highlight Firmware Version 2 Tosee the firmware versions installed press ENTER a The display will show the current firmware version for each of the four CPU boards A through D in the product b Return to the previous menu Legend 330SR Spot User Manual Rev 5 17 PROFESSIONAL Operation
36. ve AC Ground Green Yellow Green Yellow Green 1 Disconnect this product from the power outlet 2 Using a Phillips head screwdriver unscrew the fuse holder cap from the housing 3 Remove the blown fuse and replace with a another fuse of the same type and rating T 10 A 250 V 4 Screw the fuse holder cap back in place and reconnect power Make sure to disconnect the product s power cord before replacing a blown fuse Always replace the blown fuse with another of the same type and rating You can link the Legend 330SR Spot to a DMX controller using a 3 or 5 pin DMX connection If using other DMX compatible products with the Legend 330SR Spot you can control each individually with a single DMX controller The Legend 330SR Spot uses a 3 or 5 pin DMX data connection for the 21 and 27 channel DMX personalities Refer to the Introduction chapter for a brief description of each DMX personality Refer to the Operation chapter to learn how to configure the Legend 330SR Spot to work in these personalities The DMX Values section provides you with detailed information regarding the DMX personalities If you are not familiar with or need more information about DMX standards Master Slave connectivity or the DMX cables needed to link this product to a DMX controller download the DMX Primer from the Chauvet website www chauvetprofessional com Legend 330SR Spot User Manual Rev 5 UY ki Setup Gobo Wheel The Legend
Download Pdf Manuals
Related Search