User Manual Dishwasher - Downloaded from DishWasher
Contents
1. Fill the salt container and rinse aid dispenser Adjust the water hardness setting to the highest level Do a washing programme without dishes Adjust the water softener to the water hardness in your area Adjust the rinse aid dosage Om wh Loading cutlery and dishes i Refer to the leaflet Examples of ProClean loads Hints and tips Do not use the appliance to clean objects that can absorb water e g sponges household cloths e Before you load cutlery and dishes follow these steps Remove remaining food Make remaining burnt food in the pans soft e While you load cutlery and dishes follow these steps Load hollow items e g cups glasses and pans with the opening down Make sure that water does not collect in the container or in a deep base Downloaded from DishWasher Manual com Manuals Washing programmes Make sure that cutlery and dishes do not bond together Put small objects in the cutlery basket Make sure that the glasses do not touch other glasses Mix the spoons with other cutlery to prevent them from bonding together Arrange the items to let water touch all surfaces e Plastic items and pans with non stick coatings can retain the water droplets e Put light items in the upper basket Make sure that the items do not move Washing programmes Programme Degree of soil Type of load Programme descrip EXTRA HYGIENE tion function Crockery cut lery pots and pans AUTOM2. sible for their safety e Keep all packaging away from children There is the risk of suffocation or physical injury e Keep all detergents in a safe area Do not let the children touch the detergents e Keep children and small animals away from the appliance when the door is open General safety Use Do not change the specifications of this appliance There is the risk of injury and damage to the appliance Obey the safety instructions from the manufacturer of the dishwasher detergent to prevent burns to eyes mouth and throat Do not drink the water from the appliance Detergent residue can stay in your appliance Always close the door after you load or unload the appliance to prevent injury and to prevent someone falling on an open door Do not sit or stand on the open door The appliance is only for domestic use Do not use the appliance for commercial and industrial use or for other uses Do not use the appliance for uses than that for which it made You will prevent physical injury to persons or prevent damage to property Only use the appliance to clean household utensils that are applicable for dishwashers Do not put flammable products or items that are wet with flammable products in near or on the appliance Risk of explosion or fire Put the knives and all items with sharp points in the cutlery basket with their points down If not put in a horizontal position in the upper basket or in the knife basket Not all models hav
3. 0 05 MPa Maximum 8 bar 0 8 MPa Water supply 1 Cold water or hot water maximum 60 C Capacity Place settings 12 1 Connect the water inlet hose to a water tap with a 3 4 thread The rating plate on the inner edge of the appliance door shows the electrical connection data If the hot water comes from alternative sources of energy e g solar panels photovoltaic panels and aeolian use a hot water supply to decrease energy consumption Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local council your household waste disposal service or the shop where you purchased the product Recycle the materials with the symbol 5 Put the packaging in applicable containers to recycle it Installation instructions Installation Installation under a counter Put the appliance adjacent to a water tap and a water drain Remove the appliance worktop to install it under a sink unit or a kitchen worktop Downloaded from DishWasher Manual c
4. A2 2001 Emission wave length 450 nm Maximum emitted power 548 uW i To replace the internal light contact the service centre Disconnect the mains plug from the mains socket before the replacement of the internal light Service centre e Only an approved engineer can repair or work on the appliance Contact the service centre Downloaded from DishWasher Manual com Manuals MSW Product description e Use only original spare parts Disposal of the appliance e To prevent the risk of physical injury or damage Disconnect the mains plug from the mains socket Cut off the mains cable and discard it Discard the door catch This prevents children or small animals from being closed inside of the appliance There is a risk of suffocation WARNING The dishwasher detergents are dangerous and can cause corrosion f an accident occurs with these detergents contact immediately your regional poisons centre and a doctor f the detergent gets into the mouth contact immediately your regional poisons centre and a doctor f the detergent gets into the eyes contact immediately a doctor and wet the eyes with water Keep dishwasher detergents in a safe area and out of children touch Do not keep the appliance door open when there is detergent in the detergent dispenser Fill the detergent dispenser only before you start a washing programme Product description Upper basket Water hardness dial Salt con
5. ATIC Any 30 MINUTES 2 Normal or Crockery and light soil cutlery INTENSIV PRO Heavy soil Crockery cut lery pots and pans ENERGY 3 Normal soil Crockery and cutlery 50 MINUTES Light soil Crockery and cutlery 45 GLASS Normal or Delicate crock ight soil ery and glass ware PLATE WARM This programme makes the dishes ER warm before use or removes the dust from dishes not used for a ong time Prewash Main wash 45 C or 70 XC 1 or 2 middle rinses Last rinse Dry Main wash 60 C Rinse Prewash Main wash 70 C 1 middle rinse Last rinse Dry Prewash Main wash 50 C 1 middle rinse Last rinse Dry Main wash 55 C 1 middle rinse Last rinse Main wash 45 C 1 middle rinse Last rinse Dry 1 hot rinse Downloaded from DishWasher Manual com Manuals Yes with effect Yes with effect This washing pro gramme includes the EXTRA HY GIENE function It is not necessary to set the function Yes with effect Yes with effect Yes without ef fect Yes without ef fect Select and start a washing programme Programme Degree of soil Type of load Programme descrip EXTRA HYGIENE tion function PREWASH This programme gives dishes a 1 cold rinse Yes without ef quick rinse to prevent the remain fect ing food to bond on the dishes and bad odours to come out from the appliance Do not use detergent with this programme EXTRA SILENT 4 Normal soil Crockery and Prew
6. Favorit 99000 User manual Dishwasher Downloaded from DishWasher Manual com Manuals Contents Thank you for choosing one of our high quality products To ensure optimal and regular performance of your appliance please read this instruction manual carefully It will enable you to navigate all processes perfectly and most efficiently To refer to this manual any time you need to we recommend you to keep it ina safe place And please pass it to any future owner of the appliance We wish you much joy with your new appliance Contents Operating instructions 3 Loading cutlery and dishes 13 Safety information 3 Hints and tips 13 Children and vulnerable persons safety Washing programmes 14 3 Select and start a washing programme 15 General safety 3 Select and start a washing programme Use 3 15 Care and cleaning 4 Interruption of a washing programme nstallation 4 16 Frost precautions How to cancel a washing programme or a Water connection 4 delay start 16 Electrical connection gt At the end of the washing programme nternal light 5 16 Service centre 5 Auto Off 17 Disposal of the appliance 6 Remove the load 17 Product description 6 Care and cleaning 17 Control panel 7 To remove and clean the filters 17 Scroll buttons 7 To clean the spray arms 18 Option button 7 To clean the external surfaces 18 Cancel button 8 What to do if 18 Ok Star button 8 The washing results and dryin
7. ash Yes without ef cutlery Main wash 50 C fect 1 middle rinse Last rinse Dry 1 The appliance adjusts automatically the temperature and the quantity of the water This depends if the appliance has a full load or not and on the degree of soil The programme duration and the programme consumptions can change 2 When you have a light load this programme gives a timesaving solution with perfect washing results 3 Test programme for test institutes Refer to supplied leaflet for test data 4 This washing programme operates with a low level of noise The pump works at a very low speed to decrease the level of noise of 25 compared to the declaration programme Because of the low level of noise the programme has a very long time duration Set this washing programme in times when the power rate is more economical Consumption values Programme Energy kWh Water litre AUTOMATIC 0 9 1 7 8 15 30 MINUTES 0 8 9 INTENSIV PRO 1 5 1 7 13 15 ENERGY 0 9 1 0 9 11 50 MINUTES 10 gt ii 10 11 45 GLASS 0 8 0 9 i 12 PLATE WARMER 0 8 4 PREWASH 0 1 4 EXTRA SILENT 1 1 1 2 9 11 1 The display shows the programme duration i The pressure and temperature of the water the variations of power supply and the quantity of dishes can change these values Select and start a washing programme Select and start a washing programme 1 Close the door of the appliance 2 Switch on the ane Downloaded from DishWasher Manual co
8. ctly Rinse aid dosage is too high Rinse aid dosage is too low The detergent can be the cause You have set a washing pro gramme without drying phase or with a decreased drying phase The rinse aid dispenser is emp ty The multitab function is on The rinse aid dispenser is au tomatically off How to activate the rinse aid dispenser ake sure that the washing programme is applicable for the ype of load and soil Load the baskets correctly ake sure that an incorrect ar rangement of the load does not cause a blockage of the spray arms Make sure that the filters are clean and correctly assembled and installed Make sure that the quantity of detergent is sufficient Fill the salt container with dish washer salt Adjust the water softener Make sure that the salt con tainer cap is closed correctly Decrease the rinse aid dosage Increase the rinse aid dosage Use a different brand of deter gent Let the door stay ajar for some minutes before you remove the dishes Fill the rinse aid dispenser with rinse aid Activate the rinse aid dispenser Refer to How to activate the rinse aid dispenser e Go to the option menu and activate the rinse aid dispenser Refer to Control panel Downloaded from DishWasher Manual com Manuals Technical data Technical data i i Dimensions Width 596 mm Height 850 mm Depth 625 mm Water supply pressure Minimum 0 5 bar
9. delay start is set If you want to cancel the delay start refer to Select and start a washing programme After the check switch on the appliance The programme continues from the point of interruption If the malfunction shows again contact the service centre If the display shows other fault codes contact the service centre The necessary data for the service centre is on the rating plate We recommend that you write the data here Model MOD an Product number PNO ee nneeteetttttteee Serial number S N 0 aaeennrnnn Downloaded from DishWasher Manual com Manuals What to do if The washing results and drying results are not satisfactory Problem Possible cause Possible solution The dishes are not clean Limescale particles on the dishes There are streaks milky stains ora bluish layer on glasses and dishes Dry water drop stains on glasses and dishes The dishes are wet The dishes are wet and dull The selected washing pro gramme was not applicable for he type of load and soil The baskets were not loaded correctly water did not touch all surfaces The spray arms could not turn freely because of incorrect ar rangement of the load The filters are dirty or not as sembled and installed correct y The quantity of detergent was not sufficient or missing The salt container is empty Incorrect water softener ad justment The salt container cap is not closed corre
10. e the knife basket e Use only specified products for dishwashers detergent salt rinse aid Types of salt that are not specified for dishwashers can cause damage to the water softener Fill the appliance with salt before you start a washing programme The grains of salt and salty water can cause corrosion or make a hole in the bottom of the appliance Downloaded from DishWasher Manual com Manuals Safety information e Do not fill the rinse aid dispenser with other products than rinse aid e g dishwasher cleaning agent liquid detergent This can cause damage to the appliance ake sure that the spray arms can move freely before you start a washing programme f you open the door while the appliance is in operation hot steam can escape There is a risk of skin burns e Do not remove the dishes from the appliance before the end of the washing programme Care and cleaning e Before maintenance switch off the appliance and disconnect the mains plug from the mains socket e Do not use flammable products or products that can cause corrosion e Do not use the appliance without the filters Make sure that the installation of the filters is correct An incorrect installation causes unsatisfactory washing results and damage to the appliance e Do not use spray water or steam to clean the appliance Risk of electrocution and damage o the appliance Installation e Make sure that the appliance has not suffered any damage wh
11. er tap is closed fill with water operates e The display shows the message OPEN THE TAP The water pressure is too low The water tap is blocked or is furred with limescale The filter in the water inlet hose is blocked The connection of the water inlet hose is not correct Downloaded from DishWasher Manual com Manuals Open the water tap Contact your local wa ter authority Clean the water tap Clean the filter Make sure that the connection is correct What to do if Malfunction Fault code Possible solution The water inlet hose is Make sure that the wa damaged ter inlet hose has no damages The appliance doesnot An audible signal There is a blockage in Clean the sink spigot drain the water operates the sink spigot e The display shows the message DRAIN BLOCKED The connection of the Make sure that the water drain hose isnot connection is correct correct The water drain hose is Make sure that the wa damaged ter drain hose has no damages The anti flood device An audible signal Close the water tap operates operates and contact the serv e The display shows ice centre the message SERV ICE CODE Ff The programme does The appliance door is Close the door correct not start open The display ly shows the message PLEASE CLOSE DOOR The mains plug isnot Put in the mains plug connected in Blow out fuse in the Replace the fuse household fuse box The
12. f dishwasher salt DOr Pw 7 Press the OK Start button to confirm Go to WATER HARDNESS Press the OK Start button to confirm Use the scroll buttons to set the level of the water softener Refer to the chart for the right level to set Press the OK Start button to confirm i If the water softener is set electronically to the level 1 the salt indicator message stays off Use of dishwasher salt Do these steps to fill the salt container 1 2 3 4 5 TES It is correct that water comes out from the salt container when you fill it with salt Turn the cap counterclockwise to open the salt container Fill the salt container with 1 litre of water only with the first operation Use the funnel to fill the salt container with salt Remove the salt around the opening of the salt container Turn the cap clockwise to close the salt container When the salt container is empty the display shows a message REFILL SALT The message does not show while a washing programme operates After you fill the salt container the message can continue to stay on for some hours This does not have an unwanted effect on the operation of the appliance Downloaded from DishWasher Manual com Manuals Use of detergent and rinse aid Use of detergent and rinse aid ae Use of detergent W To help the environment do not use more than the correct
13. g results are Option menu 8 not satisfactory 20 Display 9 How to activate the rinse aid dispenser Use of the appliance 9 20 Switch on for the first time set the display Technical data 21 language 3 Environment concerns 21 Setting the water softener 10 7 Manual adjustment 10 Installation instructions 21 Electronic adjustment 10 Installation 21 Use of dishwasher salt 11 Installation under a counter 21 Use of detergent and rinse aid 12 How to remove the appliance worktop 3 Use of detergen 12 To adjust the level of the appliance 22 Use of rinse aid 12 Water drain connection 22 Adjust the rinse aid dosage 12 Multitab function 13 Subject to change without notice Downloaded from DishWasher Manual com Manuals Safety information Operating instructions A Safety information Before the installation and use read this manual carefully For your personal safety and the safety of your property For the respect of the environment For the correct operation of the appliance Always keep these instructions with the appliance also if you move or sell it The manufacturer is not responsible if an incorrect installation and use causes damage Children and vulnerable persons safety Do not let persons children included with reduced physical sensory reduced mental functions or lack of experience and knowledge to use the appliance They must have supervision or instruction for the operation of the appliance by a person who is respon
14. gramme i If you use the combi detergent tablets 3 in 1 4in 1 5 in 1 refer to Multitab function Downloaded from DishWasher Manual com Manuals HET Setting the water softener Setting the water softener The water softener removes minerals and salts from the water supply Minerals and salts can have a bad effect on the operation of the appliance Equivalent scales measure the water hardness e German degrees dH e French degrees TH e mmol l millimol for each litre international unit for the hardness of water e Clarke degrees Adjust the water softener to the water hardness in your area If necessary contact your local water authority Water hardness Water hardness aus 51 70 91 125 Hl 125 64 88 43 50 76 90 7 6 9 0 53 63 i 9 37 42 65 75 6 5 7 5 46 52 21 8 29 36 51 64 5 1 6 4 36 45 21 7 23 28 40 50 4 0 50 28 35 21 6 19 22 33 39 je 39 23 27 21 51 15 18 26 32 2 6 3 2 18 22 1 4 11 14 19 25 1 9 2 5 13 17 1 3 4 10 7 18 0 7 1 8 5 12 1 2 lt 4 27 lt 0 7 lt 5 12 12 1 Factory position 2 No use of salt is necessary i You must adjust the water softener manually and electronically Manual adjustment Turn the water hardness dial to the position 1 or 2 refer to the chart Electronic adjustment 1 Go into the option menu 2 Go to SETTINGS Downloaded from DishWasher Manual com Manuals Use o
15. he sink remove the plastic membrane A If you do not remove the membrane remain A ing food can cause a blockage in the drain hose spigot i A safety device impedes the dirty water to go back into the appliance If the spigot of the sink has a non return valve this can cause the appliance to drain incorrectly Remove the non return valve Downloaded from DishWasher Manual com Manuals www electrolux com C To buy accessories consumables and spare parts at our online shop please visit www aeg electrolux co uk 946640 B 072010 9117 ownloaded from DishWasher Manual com Manuals
16. i The small bars show the progress of the washing programme Messages washing programmes optional functions and related programme phases show in this part of the display Symbols GI Q U DELAY START comes on when the delay start is set and while the countdown operates EXTRA HYGIENE comes on when the related function and or the INTENSIV PRO washing programme are set MULTITAB comes on when the function is set SOUND VOLUME comes on when the audible signals are off level 0 Use of the appliance Switch on for the first time set the display language 1 2 3 Switch on the appliance When the display shows LANGUAGE ENGLISH and the word ENGLISH flashes you can confirm or change the language Press the OK Start button to confirm Press one of the scroll buttons to select a different language and press the OK Start button to confirm Press the cancel button to exit from the menu Refer to the instructions for each step of procedure 1 2 3 4 5 6 7 ake a check if the adjustment of the water softener agrees with the water hardness in your area If necessary adjust the water softener Fill the salt container with dishwasher salt Fill the rinse aid dispenser with rinse aid Load cutlery and dishes into the appliance Set the correct washing programme for the type of load and soil Fill the detergent dispenser with the correct quantity of detergent Start the washing pro
17. ile in transport Do not connect a damaged appliance If necessary contact the supplier e Remove all packaging before first use Only a qualified person must do the electrical and the plumbing installation the set up and the maintenance of the appliance This to prevent the risks of structural damage or physical injury Make sure that the mains plug is disconnected from the mains socket during installation Do not drill into the sides of the appliance to prevent damage to hydraulic components and electrical components Frost precautions e Do not install the appliance where the temperature is below 0 C e The manufacturer is not responsible for frost damage Water connection e Use new hoses to connect the appliance to the water supply Do not use used hoses e Do not connect the appliance to new pipes or pipes not used for a long time Let the water flow for some minutes then connect the inlet hose e Make sure not to squash or cause damage to the water hoses when you install the appliance ake sure that the water couplings are tight to prevent a water leakage The first time you use the appliance make sure that the hoses do not have water leaks e The water inlet hose is double walled and has an inner mains cable and a safety valve The water inlet hose is under pressure only when the water flows If there is a leak in the water inlet hose the safety valve interrupts the running water Be careful when you connect the wate
18. lly cancels the selected washing pro gramme You have to select the washing programme again 1 Press the cancel button 2 The display shows the message CONFIRM CANCEL 3 Press the OK Start button to confirm i Make sure that there is detergent in the detergent dispenser before you start a new washing programme At the end of the washing programme e The appliance stops automatically e The audible signals operate 1 The display shows the messages PROGRAMME END and PLEASE SWITCH OFF i If the salt container and or the rinse aid dispenser are empty the related messages show in the display 2 Open the appliance door 3 Switch off the appliance 4 For better drying results keep the door ajar for some minutes Downloaded from DishWasher Manual com Manuals Care and cleaning Auto Off The Auto Off function automatically switches off the appliance 10 minutes after the end of the washing programme This helps to decrease energy consumption Remove the load e Let the dishes become cold before you remove them from the appliance Hot dishes are easily damaged e First remove the items from the lower basket then from the upper basket e There can be water on the sides and door of the appliance Stainless steel becomes cool more quickly than the dishes Care and cleaning To remove and clean the filters Dirty filters decrease the washing results Although the maintenance is very low with these filters
19. m Manuals META Select and start a washing programme 3 Select if necessary options Refer to Control panel 4 Select a washing programme Refer to Washing programmes 5 Press the OK Start button The washing programme starts automatically If the delay start is set the countdown starts automatically When the countdown is completed the washing programme starts automatically If the salt container and or the rinse aid dispenser are empty the related messages show in the display and the appliance will not start Press the OK Start button again to start the washing programme i Fill the salt container and or the rinse aid dispenser when the appliance is empty and before you start a washing programme i If the delay start is set the opening of the appliance door interrupts the countdown When you close the door the countdown continues from the point of interruption Interruption of a washing programme e Open the appliance door The washing programme stops e Close the appliance door The washing programme continues from the point of interruption How to cancel a washing programme or a delay start i If a washing programme or a delay start has not started you can change the selection When a washing programme or a delay start operate it is not possible to change the selection It is necessary to cancel the washing programme or the delay start i When you cancel the delay start this automatica
20. mme Option menu DELAY START With this function you can delay the start of the washing programme with an interval between 1 and 24 hours The countdown of the delay start is with steps of 1 hour 24h 23h 22h etc EXTRA HYGIENE ON This function gives more hygiene to dishes and OFF glasses During the last rinse the temperature in creases to 68 C and stays above 65 C minimum for 10 to 14 minutes This function is available with all washing pro grammes but does not have an effect on some pro grammes Refer to Washing programmes MULTITAB ON The multitab function is for combi detergent tablets OFF Refer to Multitab function SETTINGS LANGUAGE ENGLISH You can set the language of the messages in the dis play Different languages are available WATER HARDNESS You can adjust the level of the water softener Refer to Setting the water softener 10 levels are available RINSE AID You can activate deactivate the rinse aid dispenser Factory set off SOUND VOLUME You can adjust the volume of all the audible signals 5 levels are available Level 0 volume off BRIGHTNESS You can increase or decrease the intensity of the light of the display 10 levels are available Factory set level 10 CONTRAST You can increase or decrease the contrast of the dis play 10 levels are available Factory set level 6 Downloaded from DishWasher Manual com Manuals Use of the appliance NN ones amp os Q A
21. om Manuals Installation Make sure that the dimensions of the recess agree with the dimensions in the picture How to remove the appliance worktop 1 Remove the rear screws 1 2 Pull the worktop from the behind of the appliance 2 3 Lift the worktop and move it from the front slots 3 4 Use the adjustable feet to adjust the level of the appliance 5 Install the appliance under the kitchen worktop Do not squash or bend the water hoses during the installation To adjust the level of the appliance A correct level of the appliance lets the door to close and seal correctly With an incorrect appliance level the door does catches on the sides of the cabinet Loosen or tighten the adjustable feet to make the appliance level Water drain connection Connect the water drain hose to e The sink spigot and attach it under the work surface This prevents that the waste water from the sink goes back into the appliance Downloaded from DishWasher Manual com Manuals e Astand pipe with vent hole The internal di ameter must be minimum 4 cm Remove the sink plug when the appliance drains the water to prevent that the water goes back into the appliance The drain hose extension must not be longer than 2 m The internal diameter must not be smaller than the diameter of the hose If you connect the water drain hose to a trap spi got under t
22. quantity of detergent Follow the detergent manufacturer recommendations on the detergent packaging Do these steps to fill the detergent dispenser 1 2 3 4 5 Press the release button RA to open the lid K of the detergent dispenser Put the detergent in the dispenser Hl If the washing programme has a prewash phase put a small quantity of detergent on the inner part of the appliance door If you use the detergent tablets put the tablet in the detergent dispenser MH Close the detergent dispenser Press the lid until it locks into position i Different brands of detergent dissolve in different times Some detergent tablets do not have the best cleaning results during short washing programmes Use long washing pro grammes when you use the detergent tablets to fully remove the detergent Use of rinse aid i Rinse aid makes it possible to dry the dishes without streaks and stains The rinse aid dispenser automatically adds rinse aid during the last rinsing phase Do these steps to fill the rinse aid dispenser 1 2 3 4 Adjust th Press the release button to open the lid Ef of the rinse aid dispenser Fill the rinse aid dispenser Kl with rinse aid The mark max shows the maximum level Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during the washing programme Close the rinse aid dispenser Press the lid until it locks into position e rinse aid dosage Factory se
23. r inlet hose Do not put the water inlet hose or the safety valve in water If the water inlet hose or the safety valve are damaged immediately disconnect the mains plug from the mains socket Downloaded from DishWasher Manual com Manuals Safety information Contact the service centre to replace the water inlet hose with safety valve WARNING Dangerous voltage Electrical connection e The appliance must be earthed e Make sure that the electrical data on the rating plate agree with your domestic power supply Always use a correctly installed shockproof socket Do not use multi way plugs connectors and extension cables There is a risk of fire Do not replace or change the mains cable Contact the service centre ake sure not to squash or cause damage to the mains plug and cable behind the appliance e Make sure that the mains plug is accessible after the installation e Do not pull the mains cable to disconnect the appliance Always pull the mains plug e The appliance is supplied with a 13 amp mains plug attached If it is necessary to change the fuse in the mains plug use a 13 amp ASTA approved BS 1362 fuse Internal light This appliance has an internal light that comes on when you open the door and goes off when the door is closed AN WARNING Visible led radiation do not look directly into the beam The LED lamp is CLASS 2 in accordance with IEC 60825 1 1993 A1 1997
24. t position 3 Downloaded from DishWasher Manual com Manuals Multitab function i You can set the rinse aid dosage between position 1 lowest dosage and position 4 highest dosage Turn the rinse aid selector S to increase or decrease the dosage When the rinse aid dispenser is empty the display shows a message REFILL RINSE AID The message does not show while a washing programme operates Multitab function The multitab function is for combi detergent tablets These tablets contain agents as detergent rinse aid and dishwasher salt Some types of tablets can contain other agents Do a check if these tablets are applicable for the local water hardness Refer to the in structions from the manufacturer When you set the multitab function it stays on until you deactivate it The multitab function deactivates the flow of rinse aid and salt The multitab function deactivates the salt and the rinse aid messages The programme duration can increase if you use the multitab function Activate the multitab function before the start of a washing programme You cannot activate the multitab function when the programme operates To activate the multitab function e Go to the option menu and activate the multitab function Refer to Control panel To deactivate the multitab function and use separately detergent salt and rinse aid 1 Go to the option menu and deactivate the multitab function Refer to Control panel
25. tainer Detergent dispenser Downfall Rings aidrsisnensether Manual com Manuals Control panel KG Rating plate Filters EJ Lower spray arm EE Upper spray arm Top spray arm Worktop Control panel Aurd OFF On off button Scroll buttons Option button Cancel button OK Start button Fl Display i The messages in the display and the audible signals help you to operate with the appliance Scroll buttons With these buttons you can e select a washing programme in the washing programme menu e select options in the option menu Option button Use this button to select options To select an option 1 Switch on the appliance Press the option button the display shows the menu of available options Press one of the scroll buttons to go through the menu and select the necessary option Press the OK Start button to confirm or to go into the submenu Press one of the scroll buttons to select the adjustment in the submenu Press the OK Start button to confirm Press the cancel button to exit from the menu NOnRWN Downloaded from DishWasher Manual com Manuals HEE Control panel Cancel button Use this button to e Cancel a washing programme or a delay start Refer to Select and start a washing pro gramme e To exit from the option menu OK Start button With this button you can e confirm or memorise an option e start a washing progra
26. we recommend that you make a check at intervals and if necessary clean them 1 To remove filter A turn it counterclock wise and remove it out from filter B 2 Filter A has 2 parts To disassemble the filter pull them apart Fully clean the parts under running water 4 Put the 2 parts of the filter A together and push Make sure that they assemble correctly in each other Remove the filter B 6 Fully clean the filter B under running wa ter oo on Downloaded from DishWasher Manual com Manuals I What to do if 7 Putthe filter B to its initial position Make sure that it assembles correctly under the two guides C 8 Put the filter A into position in filter B and turn it clockwise until it locks S To clean the spray arms Do not remove the spray arms If the holes in the spray arms become clogged remove remaining parts of soil with a cocktail stick To clean the external surfaces Clean the external surfaces of the appliance and control panel with a damp soft cloth Only use neutral detergents Do not use abrasive products scouring pads or solvents e g ace tone What to do if The appliance does not start or stops during operation First try to find a solution to the problem refer to the chart If not contact the service centre Malfunction Fault code Possible solution The appliance doesnot An audible signal The wat
Download Pdf Manuals
Related Search