Signal Analyzer - Viavi Solutions Inc.
Contents
1. Humerio keys enter values for test The JD708B Integrated Functionality Spectrum Analyzer Locates and identifies various signals over a frequency range up to 7 2 GHz 100 kHz to 7 2 GHz Built in Pre amplifier Detects signal as low as 160 dBm with phase noise 100 dBc Hz at 30 kHz offset and measurement accuracy bet ter than 1dB Zero Span with Gate Sweep Triggers pulse or burst signal such as WiMAX GSM and TD SCDMA GPS Receiver and Antenna Provides geographical location and highly accurate frequency and time base enabling precise frequency mea option 010 surements Interference Analyzer Provides the parameters of spectrogram and a multi signal RSSI required to properly monitor identify and option 011 located interference signals In addition it is capable of generating an audible variable tone accordingly to the signal strength Channel Scanner Intuitive graphical representation of the signal s power for each of the 20 user definable carriers frequencies or option 012 channels allowing a fast identification of improper power levels Signal Analyzer Provides 3GPP 3GPP2 IEEE802 16 conformance for testing for power and spectrum as well as modulation analy option 020 to 028 sis from 2G to 4G wireless technologies Over The Air Analyzer Characterizes the transmission quality at any location providing reflective measurements and identifying signals option 040 to 048 providing from different sites ee2. 852 2892 0770 FAX 49 7121 86 1222 Product specifications and descriptions in this document subject to change without notice 2011 JDS Uniphase Corporation 30168328 000 0111 JD748ASA BR CPO TM AE
3. QO J DS U COMMUNICATIONS TEST amp MEASUREMENT SOLUTIONS JD748A Signal Analyzer Introduction The Signal Analyzers JD7108B and JD748A are the optimal test tool for installation and maintenance of cell sites The Signal Analyzers contain all the features and capabilities required to perform field testing of cell sites of all wireless technologies from 2G to AG The Signal Analyzers are equipped with onebutton standard based measurements for wireless signals and offers the full scope of BTS conformance test The Signal Analyzers have integrated all the necessary functions to effectively test BTS Its combined functionality includes spectrum analysis cable and antenna analysis power meter interference analysis channel scanner E1 T1 analysis and signal analysis Its new platform extends its spectrum analysis frequency range while increasing sensitivity dynamic range and improving measurement speed The standard features of the Signal Analyzers include the following e Spectrum Analyzer e Power Meter The Signal Analyzers were designed with a flexible platform that can support any of the following functions e Interference Analysis e Channel Scanner e GPS Receiver e Built In Bias Tee e Signal Analysis of cdmaOne CDMA2000 EV DO GSM GPRS EDGE WCDMA HSDPA TD SCDMA Mobile WiMAX and LTE The Signal Analyzers are the ideal field testing solution that combines portability due to its lightweight design and battery extende
4. JD7108B and JD748A SIGNAL ANALYZER JD748A Integrated Functionality AUDIO JACK 3 5mm built in awhio jack Host amp Client port to anster dota and to oomeat external K PAVED enaa J 7 Fumotion hard keys to actteate JD748A Integrated Functionality Spectrum Analyzer Locates and identifies various signals over a frequency range up to 4 GHz 100 kHz to 4 GHz Built in Pre amplifier Detects signal as low as 155 dBm with phase noise 90 dBc Hz at 30 kHz offset and measurement accuracy bet ter than 1 GB Zero Span with Gate Sweep Triggers pulse or burst signal such as WiMAX GSM and TDSCDMA GPS Receiver and Antenna Provides geographical location and highly accurate frequency and time base enabling precise frequency mea option 010 surements Interference Analyzer Provides the parameters of spectrogram and a multi signal RSSI required to properly monitor identify and locat option 011 ed interference signals In addition it is capable of generating an audible variable tone accordingly to the signal strength Channel Scanner Intuitive graphical representation of the signal s power for each of the 20 user definable carriers frequencies or option 012 channels allowing a fast identification of improper power levels Signal Analyzer Provides 3GPP 3GPP2 IEEE802 16 conformance for testing for power and spectrum as well as modulation analy option 020 to 028 sis from 2G to 4G wireless technologies Over The Air Analy
5. compares the total power level within che T carrier bandwidth and the given offset frequencies on both sides of the carrier frequency to levels allowed by the standards freq Beiere Kaiera bi AH Trigg a miai Cenie freee SS W r Preg Chai z d Criees Oii ee ae joj Tripy HEZ FWO JD ele Chal Stele PM So hele eee Pier hie emeni igal ikariam Loreen Prik freee Oiri Herp Liper Ta a iir TUD iiir T ice TW iH Tl neo A iH ela hH H fie aah tH FHH GSM Spectrum Emission Mask identifies and determines the power level of spurious emissions in certain frequency bands measures the modulation envelope in the time doma ae the signal rise and fall shape of GSM format verifies the modulation quality including phase errors and I Q origin offsets characterizing the modulation quality of GSM e Cat heey FSU Preamp OT fre ites Eea 10 He Chaar 122 Fe AAT ie 3 mm Lal Chen Shamir Foe erea iri 20 00 Wi Trim RF Bers itt y bg Fhe Erre P DWH E rak GSM Constellation provides signal performance metrics at any point in the area served by the base station including indicating the strength of reflected signals as well as icang the signal strength variation a en Triger G mii _ EF ary Cente Freee 989 400 000 Me Preamp on writ EZ Feo Aima Od jA Diem Statler A So Keres Oihe DO joe Of ate Ary Mat Lal IFE Fe orai if ita hh frome Tine liaii ira bita Typ irg i alihi GSM O
6. 2146 50 2150 40 Time omon e0 lipa Alen Ci Model GCTHISA ABW WEHE SH 082768242 Eal Offe 0 g0 Frm eae 3120 Dale 18700108 i WEA ube Ser 15 Ki A Halena fl sbi tee 3 alle n Hiiren AJda Crnome JDViewer Spectrum Demodulation Sane mes iian F ri dam ai am te B co E Down Siig Mi ghai ee Me a We a ee Ai ME DHAS WH ALAE 2S i 8 Time Line MAN 1617 Camin Po 0734 Coment Paga E ae 2 a BEF F Model GETIGA Pma J fit On Olea Thi Span 15 09 lapa ADTs PEW Saez VEN See Eni cisat 0 0 JDViewer Spectrogram RSSI T Ee EEE ee 25 JD7108B and JD748A SIGNAL ANALYZER JDSU Signal Analyzer Family 2745 mm Features Spectrum analyzer Power meter RF power meter Internal RF power meter External GPS receiver and antenna Interference analyzer Channel scanner Signal analyzer Demodulation hardware ae JD7108B 100 kHz to 7 2 GHz Standard Required external power sensors Option 010 Option 011 Option 012 20 MHz standard 295mm i K l me 82mm V 195 mm JD748A 100 kHz to 4 0 GHz Standard Required external power sensors Option 010 Option 011 Option 012 10 MHz option JD7108B and JD748A SIGNAL ANALYZER Ordering information JD7108B Spectrum Analyzer Power Meter Options 100 kHz to 7 2 GHz 10 MHz to 7 2 GHz Internal mode NOTE Upgrade options for th
7. Eater nut POA Tre internal Desi Shad Ba O N al ia Ea LEEU LAEI FE Akam anl Ble ie Ereg ghiir bia die Min ail FEIT Te Hz I a Leir IPEF i me 1 IOA EFi riii a0 1 7m 1 ee OF 48 F ri PY Lt 1 Received Signal Strength Indicator JD7108B and JD748A SIGNAL ANALYZER Signal Analyzer The signal analyzer performs 3GPP 3GPP2 IEEE802 16 standard compliance testing for power and spectrum as well as modulation analysis making RF parametric analysis as well as modulation quality performance of modern wireless communication systems It performs standard based measurements with a single button action indicating a Pass Fail condition according to the standard based or userdefined limits The Auto Measure capability in Signal Analyzer creates easily set up testing scenarios including the programming of measurement schedules such as starting time duration intervals and measurement parameters Based on the user defined conditions the JD7108B and JD748A perform the tests of up to 10 carriers and automatically store the results The Over The Air OTA Analyzer function provides over the air measurements for quick performance characterization of the base station This measurement capability is especially useful in testing cell sites which are not easily accessible or the cell site proactively without interrupting service The Signal Analyzer provides following measurement capabilities e Spectrum ana
8. Pre Occupied Bandwidth e measures the amount of interference or power in an adjacent frequency channels and its ratios showing a a eT Pass or Fail condition according to the defined test condition Chaani miomo ieai hice 00 a ON T Free ium Center Erepere 2 032 BDO 00 GH Preamp Ot Freq Peleme Etersal i MH anuara CHT Chanel _ Atemuion 0d Aj Trew Source internal i En Derai ei 0 00 0 o Trp Free Faun SS a ML li ees y Miura rire rapra Hare es Pesi rap y Peat j rei DEO kh N i Hi Oa e 1 Ghi ek Helfer eee Piet irene y he itm il Tarte eth TD Hi IDE Hi Spurious Emssions offers quick and convenient field strength measurement and analysis with the userdefinable user definable multi Adjacent Channel Power segment line The field strength measurement is easy to make once the compares the total power level antenna factors are specified in the analyzer within the defined carrier bandwidth and offset frequencies according allows an easy identification of otkedeinedmakimiewiih Base onl Pa reui interfering signals The AM FM signal can be demodulated into the a ron instrument built in speaker or through a headset Gnir Fray AADO Preamp O Frea eiere Entera MI MAR panara ONT Spectrum Analyzer can be simultaneously operated with CW Signal ihmi TS Fao AD UTeg tre 5 Jj Trigger Sarco internal SE ee ee Generator option 003 It is easily fulfi
9. Preti Dali LYH ORE Dila YH Miik Hr iil Corll O jA LTE Frame Summary The characterizes the statistical power level distribution of LTE at any given time provides signal performance metrics at any point in the area served by the base station including indicating the strength of reflected signals as well as indicating the signal strength variation O HFA Tata i ya g Hi T j S eS z ieee Center Pree FR 000 DOO MHz Preamp on Freq here GS Chaweet TEN Feo Aiemmin Ode A Tri Sare eet nal Chee Sie Ged A Clere O aE CTT Trepger bern erage fall aim TE T I OU Cis ate h Control Chans i i E Pr fi bormal Ce E A Cell EF tata EF Se ater ar hae user aii Perai os DPA MET p d EL TH I e P77 bn i POEH F fia J I i i l F Ta 1M Frape y r DASH 00 mm Lay ee LTE OTA Control Channel JD7108B and JD748A SIGNAL ANALYZER 23 Channel Scanner The Channel Scanner function option 12 is capable of measuring up to 20 independent channels of any cellular technology at any frequency channel or frequency The channel scanner function provides a simple view of the power level of each signal type D U M 11 Lwi lets A ara LT Ci ii Ai T Dmi Ca ple Tri rmp F lt i ia IAHT ae Ha E Pir Ira Peal Lowe pHa Larner kr Channel Scanner GPS Receiver and Antenna The GPS Receiver option 11 provides position location latitude longitude and altitu
10. We hey Carre internal Frer Han Cie Pree ATA I DA Preamp on Chei Po rep Aimas ia jA Dhe Setar a Ch y internal tier foe pin g 7 Ue CL Le ee Vertes tel cra Peis ou Tee ikea th Erap y Cael Pare Of Sea RAL Lr Hr te HT T E kH i T r iT Reb CDMA Spectrum Emission Mask measures the amount of interference or power in adjacent frequencies and its ratios specified by the standards identifies and determines the power level of spurious emissions in certain frequency bands The Constellation measurement displays the I Q constellation diagram with modulation metrics to characterize the transmitters modulation performance The measurement displays the I Q constellation diagram with modulation metrics to characterize the transmitter s modulation performance aes Center Freqeency ATA pO O00 He Preamp cr reg Referee Entered 6 MH pected i bunt TAF Alimi 2508 M Trigger Source Enea j Criees Gii 20 000 Ong Trip Enterest Tir Bier l ee Lae Cartier Teea PR one CDMA Constellation measures power levels of the spread code channels across cdmaOne or CDMA2000 RF channel normalized to the total CDMA power CDP shows the physical channels of the cdmaOne or CDMA2000 and identifies the various spread factors by different color types making it easy to differentiate traffic types carried in the CDMA signal The n displays the power variation for every code over time presenting a clear view of the traffic
11. load per channels at any given time Fre Reimer G Fr pr TIEF ice ors ra 77 i ai lit Hiewer ve CDMA Codogram shows the power variation over time of cdmaOne or CDMA2000 control channels Pilot Page Sync and Quick Page For long term analysis the codogram and RCSI measurements can be automatically saved into an external USB memory Post analysis can be done with the application software JDViewer esr Cente Freeney ATA Me Peo Cnt re kite eS Chemi mi Pv Aimas i jA Tripp Saroe GPS Chart Sii a 0h Ty Dies Oe oie jon Tree as fra eer tee Ma Tete TO el fF Dg Di Rewer we Filar iHi kiim ja Aia fe with fed A fal wie iF Eel ij a Wl fii CDMA RCSI The characterizes the statistical power level distribution of cdmaOne or CDMA2000 at any given time The he ai r covers four key parameters channel scanner PN scanner multipath profile and code domain power The code domain power in OTA analyzer shows not only modulation performance metrics but also amplifier capacity and code utilization metrics Cenie Frape Seen Pr ear iT re Reime GS Chama t Aitai d jj Trip Sorc OFS feetsiees Extra Ohe _ O00 O Tree i au PH Dimes a bts HRH arr nm iT LETI Fi HHI i Ti HW 1 CDMA OTA Channel Scanner ee eee EV DO Signal Analyzer The EV DO Signal Analyzer performs power and spectrum measurements as well as modulation analysis in a simple and easy manner with just a few key str
12. see UpPTS and DwPTS activity over time identifying interference on UpPTS by the DwPTS transmitted from adjacent base stations The measurement displays the I Q constellation diagram with modulation metrics to characterize the transmitter s modulation performance Freq Beirm Eemal OME cen Cate Freeney 200 BOO Ger Pres ar Chara Aitai Ai Aj Trip Scarce miai Charme Steerer BM Criees Ofte S000 jong Trigger nirmal LYM M Peak CIH provides the power data for an individual code channel Hepy Linn i iei Tome Gii TD SCDMA Constellation and layer for a specified time slot It displays the power of the 16 codes ofa TD SCDMA signal SEEI SS CST Maie TO A Mialat Cote Erepere 200 SOD Gee Preamp cnt Freq Reima Entered 60 MMe eeen Th Aiemman 155 pj Tripp Sowo irnal i Ciera Oihe 20 0008 jOnj Trigger _ Biema g i em Dimes Si FRG shows the power data and error data for an individual niyi Aer Dep TS Poe Ho o Aili Ce at eee e bian Ai Dew Lok Pore biir Fusi hi eek Pera Arg da li ick creer Avg ina tree Code iraa TD SCDMA Code Power code channel and layer for a specified time simultaneously The provides four essential measurements ID scanner ID vs Tau ID multipath and ID analyzer provides signal performance metrics at any point in the area served by the base station including indicating the strength of reflected signals as well as indicating the signal strength variation
13. 010 Recommended Minimum Performance Standards for CDMA2000 Spread Spectrum Base Station RF and modulation analysis option 20 OTA analysis option 40 Channel scanner Scramble scanner Constellation Code domain power Channel power Occupied bandwidth Spectrum emission mask Codogram Multipath profile ACPR RCSI Code domain power Multi ACPR CDP table Spurious emissions Auto measure Power statistics CCDF Measurements measures the total RF power spectral density and peak to average ratio PAR of the signal in a cdmaOne or CDMA2000 channel bandwidth measures the frequency bandwidth that contains 99 of the power measuring the total integrated power and the occupied power gt iau min 5 10 22 94 we j m More COMA erpa Bw Center Frequency 1060750 Miz Channel Sed FANII Channel Standard Band 4 KA PCS Treg Reference Internal Irigarai ERE Trigger Free Run PT eamp Off Alimnitinn U dk External Cifsel 000 08 Channel Power Scale Umit dim Mode 0 FFT E kk E E Detector a al AMS HH Slik YEW a0kHe Frequency hele ee i Start M50 ZMH Occupied Beads bhi Spur muss Integrated Power Emissions Gntupied Puwer CDMA Occupied Bandwidth 1 compares the total power level within the defined carrier bandwidth and the given offset frequencies on both sides of the carrier frequency to levels allowed by the standards Freg feterence Eetermad 10 Mee
14. 100 fe EE Miru ye Seg LIE Tc ior i I Copa itum ABS M f Emission Wisk REA m 10 KH wE JA HI kHr ee Tw Tia F yer i Iro mme m i ing Start 70S OOO MH Multi ACLA Chantel Power 2i GPU R e os Secir ad Dens iby Emissions PAR WCDMA Channel Power Occupied bandwidth measures the frequency bandwidth that contains 99 of the power measuring the total integrated power and the occupied power Spectrum emission mask SEM compares the total power level within the defined carrier bandwidth and the given offset frequencies on both sides of the carrier frequency to levels allowed by the standards Adjacent channel leakage power ratio ACLR measures the amount of interference or power in adjacent frequencies and its ratios specified by the standards a AAs SU ee N ike SCA AA PEF Fatema bil Hy Faig eT IT A a F Wiley hil cae Wee eae a ee 0 ae SD ee Pe OIT ited Feri Aes el eee ee ee he Hifi Direi Ps 1 Soe te GH Loree Af Fre Lor Fef treet Hage Ref Freq iien Hef irer Sr EF Urarina irre y Be it bm Feny CTH leat lh ik din iis TE Hi EMD H WCDMA Multi ACLR Spurious emissions identifies and determines the power level of spurious emissions in certain frequency bands e WCDMA HSDPA Signal Analyzer The measurement displays the I Q constellation diagram with modulation metrics to characterize the transmitter s modulation performance C
15. 450 MHz RF Omni Antenna 450 MHz to 500 MHz RF Omni Antenna 806 MHz to 896 MHz RF Omni Antenna 870 MHz to 960 MHz RF Omni Antenna 1710 MHz to 2170 MHz Optional Yaggi Antennas G700050364 G700050365 G700050363 RF Yaggi Antenna 806 MHz to 896 MHz RF Yaggi Antenna 866 MHz to 960 MHz RF Yaggi Antenna 1750 MHz to 2390 MHz Optional Adapters G710050571 G710050572 G710050573 G710050574 G710050575 G710050576 G710050577 G710050578 G710050579 Adapter N m to DIN f DC to 4 GHz 50 O Adapter DIN m to DIN m DC to 4 GHz 50 O Adapter N m to SMA f DC to 18 GHz 50 Q Adapter N m to BNC f DC to 1 5 GHz 50 O Adapter N f to N f DC to 4 GHz 50 O Adapter N m to DIN m DC to 4 GHz 50 O Adapter N f to DIN f DC to 4 GHz 50 O Adapter N f to DIN m DC to 4 GHz 50 O Adapter DIN f to DIN f DC to 4 GHz 50 O JD7108B and JD748A SIGNAL ANALYZER Ordering information Miscellaneous G710050581 Attenuator 40 dB 100 W DC to 4 GHz Unidirectional JD74050341 JD740 Soft Carrying Case JD71050342 Hard Carrying Case JD71050343 Backpack Carrying Case G710550324 External Battery Charger JD7108B362 JD7108B User s Manual Printed Version JD748A362 JD748A User s Manual Printed Version Test amp Measurement Regional Sales NORTH AMERICA LATIN AMERICA ASIA PACIFIC EMEA www jdsu com test TEL 1 866 228 3762 TEL 1 954 688 5660 TEL 852 2892 0990 TEL 49 7121 86 2222 FAX 1 301 353 9216 FAX 1 954 3454668 FAX
16. Franr 70 D a i EN T H Tirri 1EM a r Prei E I a r DAE eS Hr eal i j EJ Or igm Chet Pai Fask LTE Data Channel Summary e measures the constellation for the specified control channels as well as modulation accuracy of the control channels at the specified subframe A itv iF i pi Em tI al Cate ramen FL a Pe ra eter Enieaai i bii ee Channel SEH FWD Alemao 5a A Trigger Soe niemal Cheri Sw Camel HA Eiee Oihe a ae jon Tri T antral Chel Gea D he Oh Boot Control Chee OVE EF Mirari dni eee Te PSH im in Fi Eh ea i 1 IFI LT et Pe OT in Fi Pe MEH bel Fa Bae fail Tint if ta HE MEEL Kii IG FF E Paced ion Pr mal al IT tl brgy ine 70 HI i H Tiare 1EM a EF j T Pref Hr eal LVH He iri O JA LTE Control Channel Summary measures the modulation accuracy ofall the data and control channels at the specified subframe measures the modulation accuracy of all the data and control channels at of the frame Center Free F000 N r Preamp hawt SE Feo Anema 150 DAL Tree e hiai Chemes d H Colere Ohe aE fO Tripa n P oe I or Mt re ote an pe a F aH ton Tae Zaja 5 re Leonia Cot eH EI ine Fa ee ALPE nS ened Cf oe 4 al T ina P REH fi Fb La E W Dil CES a MPa Ce gma PDSH CARA WF LETE EA PRAH OMA i erren linali ah Irae Ary Peer GDM il Pieeer Pegs roo EB Oga Tet T HI oll FE H laren Lsm Gee 10M a LRA Pih
17. IES Gene Ce E Anahi 7 00 Eam M GH Preamp or O Fre Retr GS ADA Lae ah Aj Tria Soerce inher Enteral Orhei 0 0068 Ot Trigger internal janie Mh 0 Ci ur Deal Ts Pose Mike Corn inane F Eyii r hp Ernie Li Ak _ Wal the TD SCDMA OTA Sync DL ID Analyzer ee MOBILE WIMAX SignalAnalyzer The Mobile WiMAX Signal Analyzer performs power measurements and spectrum measurements as well as modulation analysis in a simple and easy manner with just a few key strokes It performs conformance testing according to the following standards providing a simple Pass Fail indication on each test e JTEEE 802 16e 2005 e WiBro Korean Mobile WiMAX OFDMA Service RF and modulation analysis option 26 OTA analysis option 46 Preamble scanner Multipath profile Preamble power Trend Constellation Midamble power Code power Code error Auto measure Channel power Occupied bandwidth Spectrum emission mask Spurious emissions Power vs time frame Measurements measures the total RF power spectral density and peak to average ratio PAR of the signal in a Mobile WiMAX chan nel wage Cate fray en eleen ipm kete Pre ap ori Chai Aire ion at Aj Chee Searle a Prom il Fa Zi External iieri 00 a fo i p LED Le Et leiha y bna PS Cnap LS H Mee fe kH WPW dat es Dett mt F Chame rert SL et y PAH Dhiri Spee fT cee Shep Sie fT aa WiMAX Channel Power measures the freque
18. TA Modulation Analyzer e JD7108B and JD748A SIGNAL ANALYZER 11 WCDMA HSDPA Signal Analyzer The WCDMA HSDPA Signal Analyzer perform power and spectrum measurements as well as modulation analysis in a simple and easy manner with just a few key strokes It performs conformance testing according to the following standards providing a simple Pass Fail indication on each test e 3GPP TS 25 104 Base Station radio transmission and reception FDD e 3GPP TS 25 141 Base Station BS conformance test FDD e 3GPP TS 25 211 Physical channel and mapping of transport channels onto physical channels FDD e 3GPP TS 25 212 Multiplexing and channel coding FDD e 3GPP TS 25 213 Spreading and modulation FDD RF and modulation analysis option 23 24 OTA analysis option 43 Channel scanner Scramble scanner Constellation Code domain power Channel power Occupied bandwidth Spectrum emission mask Codogram Multipath profile ACLR RCSI Code domain power Multi ACLR CDP table Spurious emissions Auto measure Power statistics CCDF Measurements Channel power measures the total RF power spectral density and peak to average ratio PAR of the signal in a WCDMA channel bandwidth Jeu somaya oT Mode OMA Ho A Chaand Power requency 7 W000 Mie FY aor External 10 MHz i rigger Soue External Frog Referee E j F a ij kal girert DEN dE Trigger External 3 Channel Power Channel Al Channel Standard Eland I 7
19. al and Application Software CD 3Standard accessories can be purchased separately Requires option 9 Requires option 9 and 20 Requires option 9 Requires option 9 Requires option 9 and 23 Requires option9 Requires option 9 Requires option 9 Requires options 10 and 20 Requires options 10 and 21 Requires options 10 and 22 Requires options 10 and 23 24 Requires options 10 and 25 Requires options 10 and 26 Requires options 10 and 028 JD7108B and JD748A SIGNAL ANALYZER Ordering information Optional Power Sensors JD731A JD733A JD732A JD734A JD736A Directional Power Sensor peak and average power Frequency 300 MHz to 3 8 GHz Power Average 0 15 to 150 W Peak 4 to 400 W Directional Power Sensor peak and average power Frequency 150 MHz to 3 5 GHz Power Average Peak 0 25 to 20 W Terminating Power Sensor average power Frequency 20 MHz to 3 8 GHz Power 30 to 20 dBm Terminating Power Sensor peak power Frequency 20 MHz to 3 8 GHz Power 30 to 20 dBm Terminating Power Sensor peak and average power Frequency 20 MHz to 3 8 GHz Power 30 to 20 dBm Optional RF Cables G710050531 G710050532 1 5 m 4 92 ft Precision RF Cable DC to 18 GHz N m N f 50 O 3 0 m 9 84 ft Precision RF Cable DC to 18 GHz N m N f 50 QO Optional Omni Antennas G700050351 G700050352 G700050353 G700050354 G700050355 RF Omni Antenna 400 MHz to
20. ay provides visibility in daylight And its backlight keys provide visibility on the dark The Signal Analyzers have an operating temperature range from 10 to 55 Celsius and its rugged bumper was designed to protect the instrument from drops or other external impacts exceeding the MIL PRF 28800F class 2 specification Automatic Measurements The Signal Analyzers Auto Measure function allows a complete signal profiling covering RF characterization and modulation quality parameters of up to 10 different carriers particularly useful on the base stations are transmitting in different frequencies The Auto Measure can be easily executed and the instrument will automatically configure and test every aspect of all the carriers regardless of their frequency band or modulation type The Signal Analyzers configurable channel scanner can track the power level of 20 carriers in a single measurement screen tracking the power level of each carrier Multilanguage user interface The instrument s architecture allows the graphical user interface to adapt into different languages permitting localization around the world JD7108B and JD748A SIGNAL ANALYZER JD7108B Integrated Functionality 3 3mm built in External DC input PF In for Spectrum Eternal Pafaranca amdo jack DCIZY to 17 Input GPS Trigger k Reference Freq Host amp Chent port to transfer data and Ss te ae ta connect external the angliaation F s z Ej k aitwae P
21. baa ie a i3 EA aa ta tl Gap P a Fan th iM i ae te Wats WO ek fll ral L cere i Aa lw pe ee Log EV DO OTA PN Scanner TD SCDMA Signal Analyzer The TD SCDMA Signal Analyzer performs power and spectrum measurements as well as modulation analysis in a simple and easy manner with just a few key strokes It performs conformance testing according to the following standards providing a simple Pass Fail indication on each test e 3GPP TS 25 105 Base Station radio transmission and reception TDD e 3GPP TS 25 142 Base Station conformance testing TDD e 3GPP TS 25 222 Multiplexing and channel coding TDD e 3GPP TS 25 223 Spreading and modulation TDD RF and modulation analysis option 25 OTA analysis option 45 Sync DL ID scanner Sync DL ID vs Tau Constellation Midamble power Channel power Occupied bandwidth Spectrum emission mask Code power Sync DL ID Multipath ACLR Code error Sync DL ID analyzerr Multi ACLR Auto measure Spurious emissions Power vs time e Slot frame e Mask timogram Measurements measures the total RF power spectral density and peak to average ratio PAR of the signal in a TD SCDMA channel bandwidth measures the frequency bandwidth that contains 99 af the power measuring the total integrated power and the power Channel Power Morie To GCOM Cenier Preguency 20000 Mile Preamp OT Treg Reference Internal Channel Alicmiatinn Udk Trigger Swainc
22. d operation and performance with its multifunction capability The Signal Analyzers have a strong enclosure design for harsh environments and its backlight key panel makes nocturnal main tenance tasks possible fh ee a a Jikar i i 1 J pennino nng JD7108B JD748A Spectrum Analyzer 100 kHz to 7 2 GHz 100 kHz to 4 GHz Power Meter 10 MHz to 7 2 GHz 10 MHz to 4 GHz JD7108B Backlight Panel WEBSITE www jdsu com test JD7108B and JD748A SIGNAL ANALYZER Features Easy User Interface The Signal Analyzers have a consistent and intuitive interface through its multiple functions providing a common menu structure that is easy to use The Signal Analyzers have a built in help capability which guides users through each measurement task A screenshot of any functions can be saved as a graphic file for report generation and traces can be saved for post analysis process into the instrument s internal memory or external USB memory device The stored data can be easily transferred to a PC using the USB 10 100 Ethernet ports For file name editing a rotary knob is integrated with an enter button providing convenience to choose and select alphanumeric characters easily F F Ey z A d a z a aN I Field Useable Design The Signal Analyzers are compact and lightweight especially convenient for users performing field measurements Its bright 8 color displ
23. de as well as timing for highly accurate frequency measurement allowing an independent verification of base station timing Sip iea a Ta a T EREEREER TENT JD7108B with GPS Antenna JD7108B and JD748A SIGNAL ANALYZER 24 Application Software The JD7108B and JD748A communicate with the PC application software JDViewer to retrieve measurements and perform post processing analysis and reporting Features e Communicates with the JD7108B and JD748A via LAN or USB e Retrieves measured or saved measurements e Exports measurement results e Generates and prints configurable reports e Edits measurement charts e Creates a composite file of multiple spectrogram traces e Analyzes measurement results allowing the assignment of multiple markers and limit lines e Creates user defined settings for channel power occupied BW spectrum emission mask and adjacent channel power measurements e Creates or edits multi segment lines for insertion gain and loss measurements e Creates Auto Measure scenarios for multi carrier signal analysis 090900000 Cb Ee TIPS eerie EFINI es m mL ged Bee E Se EE E 1 JDViewer Spectrum Spectrogram and RSSI fe uing Mecce Hmp fail Hel en eee ip uae fi Hi iDe waned 254 Fs pe Syredieum 2135 10 2936 60 2156 10 2100 60 2147 70 2142 60 2144 10 2146 60 2147 10
24. e Eaternal Charmel Stamdari 65M aS External ffsed 000 dB Trigger Extemal A Scale Unii dom Mode 20 FFT Detector Peak HH i Sil kA VOW M 3 He Sweep Time 143 41 msec na Start 195 000 MHz Chanel Piwi Spectral Density 70 49 dim z PAR TD SCDMA Occupied BW compares the total power level within the defined carrier bandwidth and the given offset frequencies on both sides of the carrier frequency to levels allowed by the standards area Te Freq Peterm Enteral HO MH Ty scat Perwer i eniter aen 2 00 200 00 GH Preamp Oh a Dm miai iti rl Jere ads pal ee FENG Taies Of ea jini Heeler eee ieee rege Dlr Fae Mercer evel j harass IEn Ga ijir 1015 Bo ib py lAITH iam HH TED H T7 a ey 7 a i ara nue measures the amount TD SCDMA SEM of interference or power in adjacent frequencies and its ratios specified by the standards identifies and determines the power level of spurious emissions in certain frequency bands verifies that the transmitter output power has the correct amplitude shape and timing for TD SCDMA format Pati 2 ra Pat fa Dras zya Th D Center Gan TDi Bm Ghr Pres cnt frei Beiere Erien I ae Aimi 13 Bl Triage Sro internal rrr Shama ET Ciema i ee jon Tr ier s a LGE Pari PA Le a Da Pee Tie OF Poet ee TD SCDMA Power vs Time Frame The tim displays and shows how power level changes over time making it easier to
25. e JD7108B use the designation JD7108BU before the respective last two digit option number JD7108B010 JD7108B011 JD7108B012 JD7108B020 JD7108B021 JD7108B022 JD7108B023 JD7108B024 JD7108B025 JD7108B026 JD7108B028 JD7108B040 JD7108B041 JD7108B042 JD7108B043 JD7108B045 JD7108B046 JD7108B048 GPS Receiver and Antenna Interference Analyzer Channel Scanner cdmaOne CDMA2000 Signal Analyzer EV DO Signal Analyzer GSM GPRS EDGE Signal Analyzer WCDMA Signal Analyzer HSDPA Signal Analyzer TD SCDMA Signal Analyzer Mobile WiMAX Signal Analyzer LTE Signal Analyzer cdmaOne CDMA2000 OTA Analyzer EV DO OTA Analyzer GSM GPRS EDGE OTA Analyzer WCDMA HSDPA OTA Analyzer TD SCDMA OTA Analyzer Mobile WiMAX OTA Analyzer LTE OTA Analyzer Highly recommends adding JD7108B010 Highly recommends adding G70005035x and or G70005036x Standard Accessories JD71050341 G710550322 G710550335 GC73050515 GC72450518 G710550325 G710550323 JD7108B361 Soft Carrying Case AC DC Power Adapter Cross LAN Cable 1 5 m USB A to B Cable 1 8 m gt 1 G Byte USB Memory Rechargeable Lithium lon Battery Automotive Cigarette Lighter 12 VCD Adapter D7108B User s Manual and Application Software CD 3Standard accessories can be purchased separately Requires option 20 Requires option 23 Requires options 10 and 20 Requires options 10 and 21 Requires options 10 and 22 Requires options 10 and 23 24 Requires
26. e fu Brew Age FLH finer PH Chil EV DO Data Code Domain displays the power of various demodulated codes in the pilot MAC channel displays the power of the 16 sub channels of the data channel separately The displays the power variation for every code over time presenting a clear view of the traffic load per channels at any given time shows the power variation over time of EV DO channels Pilot MAC and Data For long term analysis the Codogram and RCSI measurements can be automatically saved into an external USB memory Post analysis can be done with the application software JDViewer Cette Freee Ba OD Ge Pre nT Fre Beinar G Chri eo Fw Atrio DA jij Tria Soro GS Chal Stewie B a KAAS fetes Of ae jon Trees os Has AA I fd I T Fe riai Tr ai to T farin i haerai Mie ir kin giii Ai im ALam Sint rir EFi ioe mi Pio i ji iia F coe Parl A ti oF fi 1 Cor Dari Er TF a Se OF EV DO RCSI The characterizes the statistical power level distribution of EV DO at any given time The ov covers four key parameters channel scanner pilot scanner multipath profile and code domain power Cenie Freeney a COD Ger Pres Cnt a TP Alima a jA meri Shimi Gadd AAS Ciera Oei Oa e Fre Layer mE g Zi Lal ai i Has 1440 Phare eter Milne Domiae Drim ied FA Lar The gt Be Pi Or cheer Pa Orhei teehee a Piet Mire alin Bi E 15 19 i amp iF Dat Lar fc Rae 114 EF i 6 34 B64 imi
27. ente Freee 2 132 800 000 GHr Preamp or Freq Referee Enema OMY men Chaar xd PeT Atenuat FOU Ap 0 Trigger Source Enteral Charmet Shamed Gand CF DGe Eateread A Tr iges Eee ea drei i LFH irsi EO ADFA Prep y Cree Cel Cerir Feed There WCDMA Constellation measures power levels of the spread code channels across WCDMA RF channel normalized to the total WCDMA power CDP shows the physical channels of the WCDMA signal and identifies the various spread factors by different color types making it a to differentiate traffic types carried in the WCDMA ee Freq Meter ence Extereal HIME famio mi Band i cf ho ie Titeres Cnet 79 40 a jm Tr eggs i Bij ee e ee Trn EA HDF A liari lbr iep er a iil Mi H llr rmimil Malan ferm Code Powe ws mt he hi I Hi io z i 1 LLH n i i ra i A BS E ry 178 GS ing i w sith Cede Ezy PH A Wes mE 2 fon WCDMA Code Domain Power The m displays the power variation for every code over time presenting a clear view of the traffic load per channels at any given time tes Freeney 2 132 00 G00 GH Pre ed Fer ithe Ode Al ey Shim and A C2 EDD Entera et aa a fC Ur ape as HA a Him Lit Ree 77 i a A LF FI me y i m POT WCDMA Codogram shows the power variation over time of WCDMA conical channels CPICH P CCPCH S CCPCH PICH P SCH and S SCH For long term analysis the codogram and RCSI measureme
28. he standards measures the amount of interference or power in adjacent frequencies and its ratios specified by the standard Center Ermey Ba OO 0K GH Preamp cnt Freq Peire Ewtermat HI MH rp sed arent Chwarae i 0 Fat AD erg las i3 Trigg Source internal a mal Sig amid KAAS Ciera One ae jon Trp inie Tiii BS Co Heeler cee ieee ico alien Erp y Diei Dhaba ch Pr ae Titir 1 A hii th 7 on ey Witiy EV DO ACPR identifies and determines the power level of spurious emissions in certain frequency bands measures the modulation envelope in the time domain showing the signal rise and fall shape of EV DO format Cate Fropeency BS O a GHr Preamp ont fre Geter Emea bf eee j Chanel Sl Fw Ainea i5 Aj Tripp Sa mia Dhemen Fam A Eten Of eee jon Trapper interna Pike ris few MAA Hi Lit Bee DEM Aei de Pra Dm Pearl biie Arditi EV DO Power vs Time Idle Slot The measurement displays the I Q constellation diagram with modulation metrics to characterize the transmitter s modulation performance measures power levels of the spread code Pe across EV DO channels normalized to the total EV DO power Prape 000 0 Ger Preamp Get S00 Fa oe 13a A Trig Bai iA Ciera ei a a jin Tria Freg Pelee Eiere H by Pia ce Eei mae T FT Her UA Ikie Eg Re Lat pF l H CHT LA o E ETEC Ei I Thr imho kl ETID a Litra T i i Lee Aurion lhe Lhar i erect Sit Arrr age Pore kiir Ae Die Mae bee Cher fr
29. lling the guideline of gt 100 dB required for repeater and antenna isolation measurement Helen tet eT z binrin eTe a lrer Dihari Lep Harhar Lira F T hm jir W te Le iD H 7 W eae Spectrum Emission Mask identifies and determines the power level of spurious emissions in certain frequency bands showing a Pass or Fail condition according to the defined mask limits JD7108B and JD748A SIGNAL ANALYZER Power Meter The Signal Analyzers perform two different methods of power measurement the first is an internal power measurement for standard power testing without the assistance of external power sensors and the second is interfacing with an external power sensor for high accuracy power measurements Internal power External power measurement measurement Frequency range Terminating Directional through line e 10MHzto7 2GHz power sensor power sensor Dynamic range JD732A JD731A JD733A e 120 to 30 dBm Average power Forward average power Measurement type JD734A e Forward peak power e RMS e Peak power Reverse average power e Peak JD736A e VSWR e Average and peak power The Power Meter function also provides a Pass Fail condition with user definable limits The test results are displayed in dBm and Watts The power measurement can be set as an absolute measurement displayed in dBm or as a relative measurement displayed in dB The JD7108B and JD748A display the power level in two formats as a real
30. locating the interferer source with a directional antenna The at gt is proportional to the signal power strength In addition a built in AM FM audio demodulator it provides a convenient identification of AM FM signals allows an automatic classification of the interfering signal providing a list of possible signal types corresponding to the signal selected The tr m captures spectrum activity over time indicating the power levels of the spectrum with different color identification The spectrogram is an effective measurement to identify periodic or intermittent signals Postprocessing analysis can be done for each measurement over time using a time cursor Demie frape G07 Me eap Ei Ee Reimar Entered Hi ee TSF oe pH Trigger Source himmal Ete Ofte Coa por Trager iini hrer i TIFA awe Comme Sir Baad A l Spectrogram is a multiple signal tracking metric that is particularly useful for measuring power level variations over time The RSSI measurement also allows the assignment of power limit lines for each signal generating an audible alarm and increasing an alarm counter every time any signal goes beyond the limit line For long term analysis the RSSI measurement can be automatically saved into an external USB memory Post analysis can be done with the application software JDViewer t pem 7 i iia m Airit Cenie repe a 0 Me Preamp Fe Bremar tiered H be Chur Tra Fwo Atel rhe Tre Source infernal
31. lysis e RF analysis e Modulation analysis e Auto measure The modulation analysis can be performed in any of the following wireless technologies e cdmaOne CDMA2000 option 020 e EV DO option 021 e GSM GPRS EDGE option 022 e WCDMA HSDPA option 023 and 024 e TD SCDMA option 025 e Mobile WiMAX option 026 e LTE option 028 Available Over The Air OTA analysis are e cdmaOne CDMA2000 option 040 e EV DO option 041 e GSM GPRS EDGE option 042 e WCDMA HSDPA option 043 e TD SCDMA option 045 e Mobile WiMAX option 046 e LTE option 048 GSM GPRS EDGE Signal Analyzer The GSM GPRS EDGE Signal Analyzer performs power and spectrum measurements as well as modulation analysis in a simple and easy manner with just a few key strokes It makes conformance testing according to the specifications 3GPP TS 51 021 providing a simple Pass Fail indication on each test RF and modulation analysis option 22 OTA analysis option 42 Channel scanner Frequency scanner Multipath profile Modulation analyzer Channel power Power vs time Occupied bandwidth e Slot Spectrum emission mask Frame Spurious emissions Constellation Auto Measure Measurements measures the total RF power spectral density and peak to average ratio PAR of the signal in a GSM channel bandwidth measures the frequency bandwidth that contains 99 of the power measuring the total integrated power and the occupied power
32. ms to 1000 s 6 us to 200 s in zero span e RBW 1 Hzto 3 MHz e VBW 1 Hz to 3 MHz e SSB Phase Noise 100 dBc Hz 30 kHz 102 dBc Hz 100 kHz 115 dBc Hz 1 MHz Capabilities e Built in Preamplifier Zero Span with Gated Sweep AM FM Audio Demodulation e Multiple Detectors Normal RMS Sample Negative Peak e Advanced Marker Frequency counter Noise marker e Limit Line Up to 6 markers and 6 traces Measurements Channel power measures the power level spectral density and peak to average ratio PAR of the signal in a specified channel bandwidth showing a Pass or Fail condition according to the defined power Bas SO iia See Mak ae lt Ayer BY PIS EN PET Tra f F Pater hi biy rr FW AIAG g t The T Filer hil nwel Sete i H Lh ee Late ee Lie ee tra birri OUT hee Hifi Corigeed Me Lie cred r ar EF tent al Demin ee Linh PAH Channel Power Occupied bandwidth measures the frequency bandwidth that contains the specified percentage of the power the total integrated power and the occupied power showing a Pass or Fail condition according to the defined bandwidth Ca EFA ADIU pra eT Minak ee l rT Gr ap eed Ue Fiere bi ae FPI FWL CIR S LITLE 2 i PAE UT ie i CF Wile rial hie See e G ee Late abet BSS A La Pee iT ai LIT ET j ele a F biraga e TF ea e nae pon Tr irer Him Dingi Pe Gu be he aT HEF Erminia Ehh sief rari Lenig ed
33. ncy bandwidth that con tains 99 of the power measuring the total integrated power and the occupied power compares the total power level within the da carrier bandwidth and the given offset frequen cies on both sides of the carrier frequency to levels allowed by the standards Spurious Emissions identifies and determines the power ve a no emissions in certain frequency bands rit E oe sh Cate ay 2 245 000 INK Ge Arar oni Cha ATL ee Par A ihe Sm area al Prom LSZ Emiernai Hiiri A a po Freg heimen Baiana 1 rp U ee a a s LE Enteral fare te bey YIPA 110 acy HAA ee 2 Poe Era X Birgu emeni Poe Ciir Fip Emate ith Lirerr ri SU E E T et GU Pi O I k IU Pa PSA E e en A Shi Saye CT WiMAX Spectrum identifies and determines the power level of spurious emissions in certain frequency bands verifies that the transmitter output power has the correct amplitude shape and timing according to the standards Cate fran Te GH Pr eae ior Fre Beier Entered H ee Sitter bar Pl Aj Trigg Source Eei Chara Siami Prom LES Fi Gite OR aa jon Trapper Eniras dal feb ij Lhe lerari tf ate Airi ee eee Pris Pier pr D erect Prrer IA Harri Frase Time Ortu K Origin Oei Sa Sa E l a high See Pee WiMAX Power vs Time Frame The measurement displays the I Q constellation diagram with modulation metrics to characterize the transmitter s modulation performance ee Fre
34. nts can be automatically saved into an external USB memory Post analysis can be done with the application software JDViewer The characterizes the statistical power level distribution of WCDMA at any given time The nalyzer covers four key parameters channel scanner scramble scanner multipath profile and code domain power The code domain power in OTA analyzer shows not only modulation performance metrics but also amplifier capacity and code utilization metrics EET MES EIS WI A aes E Center Taper 2152 2 0 Gee Pree Ort Freg ee ee hate Eats Fer ADL as Daa pA Trig Source ed 1 Ge Eaters Ofte at a Orr Tr er nD PH A vane anna iy Chanel eee ferrari Coi kj 77 0 a OPH Blan or irae Freq ing Awg Arili Tire iieri bile inal rae lE Any ar drar Cant Peete mT DPEH PH EE A CF Pace A mE 5 HT Se 1 POT Aum ber Cape pe Prik Forget ee Cae ip Aer ae Ae er LpA ey OPE Goma s Bn Guan Peet L corey ihe Coder LA en Prik Uae Aien ae Liira es WCDMA OTA Code Domain Power CDMAONE CDMA2000 Signal Analyzer The cdmaOne CDMA2000 Signal Analyzer performs power and spectrum measurements as well as modulation analysis in a simple and easy manner with just a few key strokes It performs conformance testing according to the following standards providing a simple Pass Fail indication on each test e 3GPP2 C S0002 Physical Layer Standard for CDMA2000 Spread Spectrum Systems e 3GPP2 C S0
35. okes It performs conformance testing according to the following standards providing a simple Pass Fail indication on each test e 3GPP2 C S0024 B CDMA2000 High Rate Packet Data Air Interface Specification e 3GPP2 C S0032 B Recommended Minimum Performance Standards for CDMA2000 High Rate Packet Data Access Network RF and modulation analysis option 21 OTA analysis option 41 Channel scanner Scramble scanner Multipath profile Code domain power Constellation Composite 64 Composite 128 Pilot MAC 64 MAC 128 Data Code domain power Pilot MAC 64 MAC Channel power Occupied bandwidth Spectrum emission mask ACPR Multi ACPR Spurious emissions Power vs Time e Idle Slot 128 Data e Active Slot MAC Codogram RCSI MAC CDP table Auto measure Power statistics CCDF Measurements measures the total RF power spectral density and peak to average ratio PAR of the signal in an EV DO channel bandwidth Center regency 2001 BOO DOO Ge Preap on Freq fetes Esl 1 Mee Chasm mran Alimas a JA Inger Saa miea Chm a FEM dl internal iieri 400 a pon ge ileal rupee heeh lng ated Peer Chom Peer EV DO Channel Power measures the frequency bandwidth that contains 99 of the power measuring the total integrated power and the occupied power compares the total power level within the defined carrier bandwidth and the given offset frequencies on both sides of the carrier frequency to levels allowed by t
36. options 10 and 25 Requires options 10 and 26 Requires options 10 and 028 JD7108B and JD748A SIGNAL ANALYZER Ordering information JD748A Spectrum Analyzer Power Meter Internal mode Options 100 kHz to 4 GHz 10 MHz to 4 GHz NOTE Upgrade options for the JD748A use the designation JD748AU before the respective last three digit option number JD748A009 JD748A010 JD748A011 JD748A012 JD748A020 JD748A021 JD748A022 JD748A023 JD748A024 JD748A025 JD748A026 JD748A028 JD748A040 JD748A041 JD748A042 JD748A043 JD748A045 JD748A046 JD748A048 10 MHz Demodulation Hardware GPS Receiver and Antenna Interference Analyzer Channel Scanner cdmaOne CDMA2000 Signal Analyzer EV DO Signal Analyzer GSM GPRS EDGE Signal Analyzer WCDMA Signal Analyzer HSDPA Signal Analyzer TD SCDMA Signal Analyzer Mobile WiMAX Signal Analyzer LTE Signal Analyzer cdmaOne CDMA2000 OTA Analyzer EV DO OTA Analyzer GSM GPRS EDGE OTA Analyzer WCDMA HSDPA OTA Analyzer TD SCDMA OTA Analyzer Mobile WiMAX OTA Analyzer LTE OTA Analyzer Highly recommends adding JD748A010 Highly recommends adding G70005035x and or G70005036x Standard Accessories G710550322 G710550335 GC73050515 GC72450518 G710550325 G710550323 JD748A361 AC DC Power Adapter Cross LAN Cable 1 5 m USB A to B Cable 1 8 m gt 1 G Byte USB Memory Rechargeable Lithium lon Battery Automotive Cigarette Lighter 12 VCD Adapter JD748A User s Manu
37. q Brimar aieeaii HI be Tria Scarce Eiei Eaters Cate frapar 25 Ge H Pr ea ot Choate i eraa Aisma a Aj Chamel Staaten Pr 0S Pi Etera Onhe DO an jon Trigger Chamel Firer FDE fhiii riiai EW Pa Pree y lri Eire ir aaa Ei CAE E Pirri bales Sai Sa E l i Spala l ater WiMAX Constellation measures the flatness energy of the constellation according to the Standards Q eu Ob Tm EN x Center Freqeency 2a N GH Preamp ict Frey iere Emtermc HO MBG ec cima Chane Atrio F Al Tripp Source External Chanel Standard Prom 025 20 Catered Ofte AO a pny Trapper _ E eet iral T bn Anir age i t Porat Sauer ar er HAL Sat See CT a high Se Yep WiMAX Spectral Flatness shows the error vector magnitude representing the average constellation error of WIMAX OFDMA subcarriers shows the error vector magnitude representing the average constellation error of WiMAX OFDMA symbols The characterizes the statistical power level distribution of WiMAX at any given time The o provides three essential measurements preamble scanner multipath profile and preamble Power Trend provides cell ID sector ID and preamble at any point in the area served by the base station including indicating the strength of reflected signals as well as indicating the signal strength variation GO Bau BOE i Li l i EN Carte frape 7 M000 000 Gt eag a Freg einem GPS Chaam vinatentia irate ia Al lnigger e i
38. res the total RF power spectral density and Peak to average ratio PAR of the signal in a LTE channel bandwidth Se LE Freq Petererece Erieraai 00 Mee y Aitai ee ea Tri a lpbernal __ Titers Of eta joa Trapper hawi Camie Framer FL Do H Preap SEH Pet mi Gand 13 POO LTE Channel Power measures the frequency bandwidth that contains 99 of the power measuring the total integrated power and the occupied power compares the total power level within the defined carrier bandwidth and the given offset frequencies on both sides of the carrier frequency to levels allowed by the standards measures the amount of interference or power in adjacent frequencies and its ratios specified the standards Coir freer EOD ae Pre cet freq Beier Ewiereo bf ee hanna t a Pet Aipa 13 jj Tri har inher hl Sii Dad A iere Gi a ond Tree thet ete Pir Frap y Bie itmi CETE iLemahyih D T Hi 20 m Hr LTE ACLR identifies and determines the power level of spurious emissions in certain frequency bands measures the modulation envelope in the time dna showing the power of each time slot in an LTE signal measures the constellation for the specified resource Binet as well as the modulation accuracy of each PDSCHss at the specified subframe cee es Center frame FSi i ie Frea E Fre Rie Eiere bi bihia a Pep Aitea i3 PAL Tris Saerce miai Curent Si Band APO Eer Oei 20 000 dOn Trigger Mat Mei M
39. time power level value in an analog meter and as a power level trend through time in a histogram chart For high precision power measurements the JD7108B and JD748A interface with external power sensors through a USB connection There are two types of power sensors e Termination power Power sensor JD732A JD734A or JD736B For out of service testing e Directional power or through line Power sensors JD731A or JD733A Having the advantage to perform in service power testing al p aor ara bam eL h es g JOS ih REA Sed AT Mimir Pirim birir filer real epee GATS ee etd rs cet w Ce Ce a hue Siar Peed 1 A isp lay khan wt etmetor Maeda External Offeel ah a Internal Power Measurement a AAP Se AE Pini Pirri birini Lina p a Pepay N He ae Maisie fe ue Termmuiang i gpl ay ii ut Detector Wijde External Offeel External Power Measurement 10 Ce ch EO 00 fin ii Gn ae Re E nie lirim y CA Ai ihare horde Lar 8 Fa Pal a eee Shi Irra y COL AT Prak Pier Interference Analyzer The Interference Analyzer option 11 is the most effective way to locate and identify periodic or intermittent RF interferences The presence of interference signals are derived from licensed or unlicensed transmitters of many kinds causing dropped calls and poor quality service Measurements The 2 with an audible indicator is especially useful during the process of
40. vternal Chanel i Pregl 02520 Ceternal Oiio 40000 a Pott Tren otal Preside Pree the i tn hel ini E Prerana be Harel her Pirani Celi Hi Tai ih e Teel ran for ll Us Lo i ge a fil EE ri i l EE 13 Bal 1 10 ee ail FEE i i Pal Wi a i a ia T i L ri Lalie Seite WiMAX OTA Preamble Scanner ee LTE Signal Analyzer The LTE Signal Analyzer performs power measurements and spectrum measurements as well as modulation analysis in a simple and easy manner with just a few key strokes It performs conformance testing according to the following standards providing a simple Pass Fail indication on each test e 3GPP TS 36 104 Evolved Universal Terrestrial Radio Access E UTRA Base Station BS Radio Transmission and Reception e 3GPP TS 36 141 Evolved Universal Terrestrial Radio Access E UTRA Base Station BS Conformance Testing e 3GPP TS 36 211 Evolved Universal Terrestrial Radio Access E UTRA Physical Channels and Modulation e 3GPP TS 36 212 Evolved Universal Terrestrial Radio Access E UTRA Multiplexing and Channel Coding RF and modulation analysis option 28 OTA analysis option 48 Channel power Data Channel Summary ID Scanner Control Channel Summary Subframe Summary Frame Summary Auto Measure Power Statistics CCDF Occupied bandwidth Spectrum emission mask ACLR Spurious emissions Power vs time frame Multipath Profile Control Channel Measurements r measu
41. zer Characterizes the transmission quality at any location providing reflective measurements and identifying signals option 040 to 048 providing from different sites ee JD7108B and JD748A SIGNAL ANALYZER Spectrum Analyzer The Signal Analyzers have a general purpose spectrum analyzer which is the most flexible test tool for RF analysis including spectrum monitoring and analysis The spectrum analysis function provides the capability of one button standards based power measurements for wireless signals e Channel Power e Adjacent Channel Power e Occupied Bandwidth e Spurious Emissions e Spectrum Emission Mask e Field Strength Specifications The Signal Analyzers have one of the best sensitivity and selectivity specifications With its built in preamplifier measurements can be done as low as 160 dBm witha 1 Hz RBW Its low SSB phase noise allows detecting very low level spurs or noise signals which are close to the carrier Its narrow 1 Hz bandwidth ensures the identification of signals that are very close in frequency In addition the narrow RBW means that the displayed noise level can be reduced improving sensitivity Its Auto Sweep time and Auto RBW VBW allows an easy set up for a fast sweep time while ensuring accurate measurement e Frequency Range 100 kHz to 7 2 GHz JD7108B 100 KHz to 4 0 GHz JD748A e DANL RBW 1 Hz fc lt 1 GHz 145 dBm 160 dBm with preamp e Sweep Time 10
Download Pdf Manuals
Related Search