Home

3000P Series-E-No PBI Logo - Wire-Tech

image

Contents

1. PDSR 3000P NO Satellite The name of satellite which corresponds with the antenna e LNB Type Select your LNB type there are three options e General Single Polarization LNBF e Univ Dual pol Universal LNB e LNBF Dual pol C band LNB 4 LNB Freq when LNB type changed the frequency of LNB changed accordingly You could input frequency using numeric a a Poo st LNB Type Normal keys PDSR 3000P supports two LNB LNB Freq 1 05150 LMB Frog 2 11300 local frequencies if the channel sett n eee 05306 None couldnt be searched with first local frequency it will automatically search the channel with second local frequency 5 Switches 22KHz DiSEqC you could select the switches with which you want to configure the antenna Antenna dh Press ESC to finish antenna setting the os Ze 4b message Are you sure to change the ME Areyousuretochange 7141 the configuration of Antenna Setup configuration of Antenna set up will be displayed Select OK and press OK key to confirm it and wait for the update data to be saved Channel Search 1 Antenna Select the number of the antenna corresponding to the satellite you want Notify On the right side of screen you could see the correspondent parameters Antenna Satellite of selected satellite if it is not correct eg nr 4 Symbol Rate you could modify it in Antenna Setting Potarization 2 Transpon
2. Select the slot you want to check and press OK the related information will be displayed If there isn t any information about Smart Card it will display No Card please insert the smart card again 5 4 2 Descrambling Options Multi channel descrambling Option depends on rd E TIS the Cl module Only the professional Cl Module can support multi channel c Authorizations About OCAM descrambling function Use this function you could descramble multiple scrambled programs in a stream with ASI output 2 or more or all programs in the stream are decrypted 91 PDSR 3000P Single Channel it could only decrypt one channel in the multi program stream with general Cl Module amp Multiple Channel it is only available when the professional CI Module supports multi descrambling function and the Smart Card has multi program authorization then 2 or more or all programs in the stream are decrypted Note Please refer to 6 2 Cl multiple channel descrambling Slot Designation Channel if the Slot1 hasn t been designated to one channel the Cl Module of Solt1 will descramble the current viewing channel If it has been designated to one channel the CI Module of Slot1 will only descramble the designated channel Slot2 Designation Channel it is similar with Slot Designation Channel 6 ASI Input Output and CI Descramble Function 6 1 ASI output and descramble scramble setting It is
3. un namens 23 PDSR 3000P 1 Overview PDSR 3000P is a professional digital decoder with Cl interface PDSR 3000P could receive digital satellite TV signal cable TV signal and terrestrial TV signal PDSR 3000P 10 series could output decoded TV image PDSR 3000P 18 series do not have Cl interface but could output free TV image and ASI stream PDSR 3000P 20 series could output decoded TV image and ASI stream PDSR 3000P 30 series not only have the same function with 10 series 18 series and 20 series but also have ASI input interface If you have any problem of operation please refer to the related content of this manual If the problem still exists please contact the seller or contact us directly Function Input Signal 3000P 30 series 5 Notes o shows that this function is available shows that this function is not available 1 1 Main Features e Fully comply with MPEG 2 and DVB standards e Common Interface with 2 slots PCMCIA that can support the encrypted systems of Irdeto Viaccess NDS and so on e Support multi descramble function it depends on the Cl module It is only available on PDSR 3000P 10 series 20 series 30 series e 2 slots of PCMCIA Module could descramble multi program and stream It is only available on PDSR 3000P 10 series 20 series 30 series e Support ASI input the un decrypted programs could be further decrypted through loop through It is only available on PDSR 3000P 30 series
4. only available on DCH 3000P 10 series 20 series 30 series When you are viewing the Free to Air satellite program the ASI stream of this program will be output at the same time it could be as signal resource when it is connected to QAM Modulator or Multiplexer For scrambled programs you should insert corresponding CI Module and CA Smart Card to descramble this program then you could view the descrambled programs and the transport stream including the descrambled program could be output at the same time You could choose the output stream as descrambled or scrambled Enter system setting menu set the ASI output to Descrambled or Scrambled Please refer to 5 3 1 system setting 6 2 Cl Multi channel Descrambling It is only available on PDSR 3000P 10 series 20 series 30 series It has 2 methods to descramble multi channel to output the transport stream with multi channel descrambled Method 1 1 Insert professional Cl Module that supports multi channel descrambling A mom mm function and CA smart card with multi CA SLOT Fix charol SLOTA Fix chanmol authorization 2 Enter system setting menu set the ASI output is Descramble Please refer to 5 3 1 System Setting 3 Set the descramble option to the item Multi Channel and set the designation channel of Slot1 and Slot2 to None 22 PDSR 3000P Please refer to 5 4 2 Descramble option 4 Exit Main Menu and back to view mode press OK key to s
5. provider Co BE client appellation a 24 25 26
6. DCH 3000P 10C ASI TS QAM Modulator MULTIP DCH 3000TM RF PDSR 3000P 18C ASI TS LEXER QAM Modulator DCH 3000TM RF DCH 3000P 20C ASI TS QAM Modulator QAM Demodulator DCH 3000P 30C QAM Demodulator DCH 3000TM QAM Modulator 3 3 3 PDSR 3000P 30T PDSR 3000P 30T is installed on the 19 rack Please refer to the user s manual when you install it The following is the typical applications of PDSR 3000P 30T The PDSR 3000P 30T receives the antenna signal and demodulates it to output ASI baseband transport stream to a DVB MPEG 2 multiplexer The multiplexer filters or refreshes the PIDs of the selected programs and rebuild the EPG SI and other necessary tables The PDSR 3000P 30T receives the antenna signal and demodulates the signal It will output ASI baseband transport stream to QAM modulator the QAM modulator will send the QAM signal to CATV network he PDSR 3000P 30T receives the antenna signal and demodulates the signal It will output ASI baseband transport stream to work as a signal source of a media player or an encoder The PDSR 3000P 30T could provide baseband transport stream from antenna needed by some technicians for monitoring and analyzing PDSR 3000P Connect to Multiplexer PDSR 3000P ASI TS 30T ASI TS PDSR 3000P M 30T MULT Professional Decoder IPLE ASI TS ELSE T XER PDSR 3000P ASI TS Professional Decoder PDSR 3000P 30T Professional Decoder Con
7. Graphic PIG mode 1 9 size of the normal screen size You could also see channel information under the PIG screen When you move from one channel to another the PIG will change accordingly Inthe TV Channel Manager you can delete TV channels by using Delete Channel command First select the TV channel you want to delete 25 LI using the keys Press OK xa m GRANNEN An X marks the channel that will be deleted Kane ac DON d 0 am Repeat this procedure for other TV Channels Oh 040 D Stell Anta 2 me LUN you want to delete To de select any marked iss date ore TV channel select it and press OK the X will be removed If you decide to delete the marked channels press ESC A message Are you sure to delete marked channels is displayed Select OK or Cancel in the message box and then x an press the OK key to make sure your operation 0 EA Bia moria ame Press ESC to exit the Main Menu a message is displayed Saving data After data being saved you could view the channel list to check if the delete operation is successful Note e The deleted channel cannot be recovered unless you start a Channel Search again e Please do not power off when the message Saving data is displayed in case any information missed or other trouble 5 2 Installation 5 2 1 PDSR 3000P XXS Antenna Setting 1 Antenna Each antenna corresponds With a satellite 14
8. IN LNB OUT B1 B2 B3 B4 B5 Be B7 B8 B9 B10 B11 B12 B13 B14 B15 B1 XLR L XLR interface left audio channel balance output B2 XLR R XLR interface right audio channel balance output B3 VIDEO RCA interface AV video output B4 AUDIO L RCA interface left audio channel output B5 AUDIO R RCA interface right audio channel output B6 VIDEO BNC interface multiplex video output B7 ASI OUT1 ASI output interface B8 ASI OUT2 ASI output interface PDSR 3000P B9 ASI IN ASI input interface B10 RS 232 data interface it is used to upgrade software B11 LNB IN Satellite signal input interface B12 LNB OUT Satellite signal output interface it provide satellite signal to next IRD B13 GND Connect to ground B14 FUSE Fuse it is installed in power socket B15 AC90 260V 50Hz 60Hz AC power socket 3 3 Installation PDSR 3000P is installed on the 19 rack please refer to the user s manual when you install PDSR 3000P The following is the typical applications of PDSR 3000P For example PDSR 3000P 30 series 3 3 1 PDSR 3000P 30S The PDSR 3000P 30S receives the QPSK signal and demodulates it to output ASI baseband transport stream to a DVB MPEG 2 multiplexer The multiplexer filters or refreshes the PIDs of the selected programs and rebuild the EPG SI and other necessary tables The PDSR 3000P 30S receives the QPSK satellite signal and demodulates it and output ASI baseband transport stream to QAM modulator The QAM modulator will sen
9. User s Manual Professional Digital Decoder PDSR 3000P Content Table Ee SD CES 1 Mi ee LUI ea ee IET 1 1 2 FOR You Safe Ve 2 A TERT 2 2 POEMA ee ee 2 24 DOR SOU OPER KS ee 2 2 2 PDOR 9000PSXXQ anal 3 2 9 FDSR 3000P XOT anne 4 9 Installation and ODeFaTOEi 4o eic pav i m ses deb tta andes a ete te ab tovs 5 Sele TOME DANG late EDI een 5 IR INDIAN o A EAA ee 6 A AA ee see ee ne 7 OID ORO O00 3 Oo scias ee ale 7 332 PDSR OOO 30 go 8 2 00 PIS A S000730 Erratas 9 A general EUDcHOfIS rennen 11 dl Select SIM EC iia 11 4 2 Channel InfoFmiallOlt uoi rado aa 11 RS SP dde Enc iot REAA UR see 11 AA AUM CONTO Pe EET TT UN MM 11 45 1 Vado SWITCHING er See es 12 Mentor Na ION ee 12 5 1 Ghannel Manager 2322 a ea dica o vedi 12 522 PS AO DO doe E 16 5 2 3 PDSR 3000P AAT di 17 od Racional sidad UL 18 5 3 ODM OM uc me 19 5 3 1 O SIEM Selling me m m 19 529 3 IRDNNIOFMAUON seen een nein 20 5A COMMON Weide cerillas 20 941 Common Interface Stal Ses ita xn ete ek Re 20 5 4 2 Descrambling OPIO Sisi iia 20 6 ASI Input Output and Cl Descramble Function 21 6 1 ASI output and descramble scramble setting 21 6 2 Cl Multi channel Descrambling cccccccccseeeecseeeceeseeceeeecceeeeeseeessaeess 21 6 3 ASI Input function It is only available on PDSR 3000P 30 series 22 fa Trouble SHoO0llllg
10. ar transport stream or scrambled transport stream ASI Packet Setting ASI stream data format between 188 or Bypass The PDSR 3000P will not transfer the original data package format 5 3 2 Antenna Direction Help It provides the antenna direction help function you could get correct information to direct your antenna toward a satellite satellite Steps E EC Your longitude 1 i l Your latitude MEE First select your desired satellite name il and the location information of selected satellite will be displayed In case the location of the satellite is changed you can re set the new location 90 PDSR 3000P 2 Second input the value of local longitude and latitude move cursor to Calculate then press OK the correct information of satellite will be displayed 5 3 3 IRD Information lt will display the software version hardware version and copyright information about DCH 3000P 5 4 Common Interface It has 2 CI slots you should select the suitable Cl module and Smart Card corresponding to the scrambled program Note Please pay attention to the interface direction of the Cl Module and Smart Card it should be inserted to slot with correct direction and it should not be pluged arbitrarily 5 4 1 Common Interface status It is used to check the Cl Module information If the Cl Module is inserted to Cl slot the corresponding slot column will display the CI Module name
11. ce the indicators of signal strength and quality will become red and the values of current strength and quality will be displayed Use 4b keys to select Search TP after parameters are set PDSR 3000P XXC could search for TV and radio channels automatically Es Frequency During searching procedure you can see a list oe of the previously searched channels in the Searched List Box on the screen On completion of searching channels the cursor will be moved to VIEW automatically then press OK key to watch the program 2472 5 2 3 PDSR 3000P XXT Channel Search 1 Channel channel number 2 Frequency Modulation Frequency to be demodulated 3 OFDM Spectrum 2k or 8k carrier 4 Guard Interval 1 32 1 16 1 8 1 4 5 Constellation QPSK 16QAM 64QAM 6 Hierarchi NONE 1 2 4 optional 7 FEC 1 2 2 3 3 4 5 6 6 7 7 8 After setting parameters you could press lt gt keys to select serach options e Search CH Search programs on the selected channel e Search Network Search channels for the network related to the TP selected You could use it to search new terrestrial channel How to search After setting parameters move cursor to search column choose desired search option Then press OK to begin searching During searching procedure you can see a list of the previously searched channels in the Searched List Box on the screen On completion of searching channels you could m
12. cket Length Signal Level Others Power supply Net weight Dimension Operation Temperature Storage Temperature 2 3 PDSR 3000P XXT PDSR 3000P 750 16 32 64 128 256 QAM 750 BNC connector 270Mb s Byte 188 or Bypass 800mV 10 AC 90V 260V 50Hz 60Hz 5Kg 44mmx255mmx483mm 0 40 C 20 70 C DVB T demodulation amp FEC parameter Input Frequency Range Input Level Input Impedance Input Connector symbol Rate OFDM Spectrum Constellation Guard Interval mode FEC ASI Input Interface Data Mode Packet Length Signal level ASI Output Interface Data Transmission Rate VHF 174MHz 230MHz UHF 470MHz 862MHz 91dBm 20dBm 750 RF FEMALE 2MB 45MB SPTS or MPTS 2k and 8k QPSK 16QAM 64QAM 1 32 1 16 1 8 1 4 1 2 2 3 3 4 5 6 6 7 7 8 750 BNC connector Byte Burst 188 204 Adaptive 800mV 10 750 BNC connector 270Mb s PDSR 3000P Data Mode Packet Length Signal Level Others Power supply Net weight Dimension Operation Temperature Storage Temperature Byte 188 Bypass 800MV 10 AC 90V 260V 50Hz 60Hz 5Kg 44mmx255mmx483mm 0 40X 20 70X 3 Installation and Operation 3 1 Front panel A1 A2 A3 A4 A5 A6 A9 POWER LOCK SHIFT LED Common Interface MX kX Power indicator it is on when the power supply works Satellite signal indicator it is on when the satellite signal is received or ASI signal is locked Shift indicator wh
13. d the QAM signal to CATV network The PDSR 3000P 30S receives the QPSK satellite signal and demodulates it and output ASI baseband transport stream to a DVB IP gateway to work as a signal source of a media player or an encoder The PDSR 3000P 30S could provide baseband transport stream from satellite needed by some technicians for monitoring and analyzing Connect to Multiplexer PDSR 3000P 30S CATV Netw ork PDSR 3000P 30S ASI TS PDSR 3000P MEE J Professional Decoder Jmsemr uUu rczae PD 308 Professional Decoder PDSR 3000P PDSR 3000P Connect to QAM Modulator PDSR 3000P DCH 3000TM 30S QAM Modulator PDSR 3000P 30S DCH 3000TM Professional Decoder NAM Madi lata DCH 3000TM C JA MI Nino Alo Professional Decoder Connect to TS Generator DVB MPEG2 TS Analyzer Professional Decoder 3 3 2 PDSR 3000P 30C PDSR 3000P 30C is installed on the 19 rack Please refer to the user s manual when you install it The PDSR 3000P 30C receives the signal from QAM modulator and demodulates it and output ASI baseband transport stream to a DVB MPEG 2 multiplexer The multiplexer filters or refreshes the PIDs of the selected programs and rebuild the EPG SI and other necessary tables And outputs ASI TS through the video audio of a TV PDSR 3000P Connect to QAM Modulator DCH 3000TM RF
14. der Use lt gt keys to select the desired TP or move to the new TP item you could edit the parameters of this TP 3 Frequency amp Symbol Hate Edit the frequency and symbol rate If the pre 45 setting program couldnt meet your requirement you could set the satellite parameters manually Polarization Select H or V Channel Search After setting the satellite parameters you could press lt P keys to select serach options Search SAT Search all pre setting channels for selected satellite Search TP Search all channels for one TP which has been selected from the TP item Search Network Search channels for the network related to the TP selected You could use it to search new satellite channel How to search After setting parameters move cursor to search column choose desired search option then press OK to start searching Searched List Box on the screen amp Setting PID Delete TP Search Options 1 Set PID You could set PID Packet Identifier manually with Set PID command Move to the Transponder item and press Menu key to display the Command box select Set PID command and press OK the menu Set PID will be displayed you could input correct data and press OK key to confirm it If the Set PID operation is successful you could see a new program named PID XXXX in the channel list the XXXX means Video PID 16 PDSR 3000P An
15. e Support professional analog video audio interface output e User friendly OSD and easy to use menu system e User programmable various satellite amp transponder information It is only available on DCH 3000P XXS e Automatic network search for newly added transponders networks It is only available on PDSR 3000P XXS PDSR 3000P Stores up to 2000 channels SCPC MCPC receivable from C Ku band satellite It is only available on PDSR 3000P XXS VBI Teletext support Antenna positioning help feature It is only available on PDSR 3000P XXS Automatic PAL NTSC conversion Automatic last channel saving Support OSD menu 1 2 For Your Safety Allow clear space around the equipment for sufficient ventilation Use only a clean soft cloth lightly moistened with a mild detergent solution to clean the casing Do not connect or modify cables when the equipment is connected to the power source Do not remove the cover Do not expose the equipment to extreme heat cold or humid conditions Never allow liquids spray or other materials to come into contact with the inside of the equipment 1 3 Unpacking Please unpack the box to check all of the following items are included in the packaging User s manual 1pc PDSR 3000P 1pc Power cord with three cores 1pc AV cable with three cores 1pc ASI cable 1pc It is only available on PDSR 3000P 20 series 30 series XLR connector 2pcs It is only available on PDSR 3000P 30 series 2 Specificat
16. elect the channel which 1 1 Channel Im you want to descramble wait for a while M 3 National it will play the selected channel then select another program which you want to descramble then the IRD could output the stream of multi descrambled channels Note 1 Because the quantity of multi channels to be descrambled of each Cl module is different so the quantity of the synchronously descrambled channels depends on the Cl Module 2 The Multi Channels must be transmitted from the same transponder Method 2 1 Slotland Slot2 must be all inserted the Cl Module and Smart Card 2 Enter System Setting menu set the ASI output to Descramble Please refer to 5 3 1 System Setting 3 Set the Descramble option to Single Channel and set the designation channel of Slot1 and Slot2 to be the channel that you want to descramble Please refer to 5 4 2 Descramble Option 4 Exit Main Menu and back to View mode press OK key to select the channel which you want to descramble and wait for a while the selected channel will be played then select another channel which you want to descramble so it could output the stream with the designated channels which are descrambled Note The Multi Channels must be from the same transponder 6 3 ASI Input function It is only available on PDSR 3000P 30 series It provides input interface as ASI input port it could descramble the scrambled ASI stream and outp
17. en it is on the keys of A6 A9 are of the second function Display current channel No and information when IRD starts it display as amp L 4 In general the LED displays the channel number from 0 2000 when you are tuning the volume it will display from O 17 if you are checking the channel information the LED will display the BER value from 0 00 10 00 2 PCMCIA Module slot These keys are used to set or select the parameters of functions it will be defined with different functions in different work modes please refer to the table below for detailed definition of A6 A9 PDSR 3000P Viewing mode Key Menu mode SHIFT is off SHIFT is on Down pane Ons Select audio channel Cursor moves down channel Display channel Modify parameter Cursor 2 Right TV Radio switch win oe A10 OK Confirmation Key it is used to enter submenu or confirm operation A11 MENU Menu key it is used to display menu and command box A12 ESC Exit key it is used to return to last level menu or exit menu A13 SHIFT oecond function key press the SHIFT key for 2 seconds SHIFT indicator will be on then A6 A9 will be on second function mode please refer to the table above mentioned When SHIFT is on the IRD can be operated through remote control Please pay attention to that the remote control is optional 3 2 Rear panel H1 AC90 260 GND 1 50Hz Hz 60Hz VIDEO AUDIO VIDEO ASI OUT1 ASI OUT2 ASI IN RS 232 LNB
18. ing volume the LED of the front panel will display value of volume from 0 to 17 4 4 Audio Control While SHIFT indicator is off and watching press A key to switch audio language press V key to switch audio channel you will receive short form audio information for approximately 6 seconds Antonin 1 Stati Amin BLUR Frequency TRIO 3000 H Symbol Halte 20400 ideo Pii FEO Faa PILI A EI PCA PI bnt TX PH hi Audio and Dat A i Asia 205 Y HAST i Hula Cry Hii BAT renati TVE TE RTPI APT Gv LLLI Lindo p 1 Ll HEN 14 a Lita Aa i TUE AAA TN 414 ABRE Channel nurmbur 04 burnrmblo one Favorite Moni Look o Nono Et Ai Mengt unii y Starea Chinas 1 2 lo 1 La 1h PDSR 3000P 4 5 TV Radio switching While SHIFT indicator is on and watching press key to switch TV mode and Broadcasting mode Notify Pressing gt key for 2 seconds the SHIFT indicator will be ON or OFF 5 Menu Information Connect the PDSR 3000P to the power source after installation and cable connection For the first operation of the unit the main menu will automatically be displayed Subsequent to the initial operation when the unit is powered up the last channel information will be displayed The main menu can then be accessed by pressing the MENU key of the front panel This Main Page menu consists of 4 primary menu items e Channel Manager Edit or delete programs e I
19. ion 2 1 PDSR 3000P XXS QPSK demodulation amp FEC parameter Input Frequency Range 950MHz 2150MHz Input Level 65dBm 25dBm Input Impedance 750 Input Connector F type Input Frequency band Ku and C band Symbol Rate 2MB 45MB SPTS or MPTS FEC 1 2 2 3 3 4 5 6 6 7 7 8 Reeds Salomon Decoding 204 188 T 8 PDSR 3000P LNB Control Polarization Voltage High Low band control Front panel Common Interface LED Display 8 touch button to control Indicator light Display ASI Input Interface Data Mode Packet Length ASI Output Interface Data Transmission Rate Data Mode Packet Length Signal Level Others Power supply Net weight Dimension Operation Temperature Storage Temperature 2 2 PDSR 3000P XXC 13V 18V 0 22K Switch PCMCIA Module slot fully support Irdeto Viaccess NDS and so on Display current receiving channel number UP DOWN LEFT RIGHT OK MENU ESC SHIFT 1 Power Indicator 1 Satellite Signal Locking LOCK and 1 Indicator of the second function of keys A6 A9 750 BNC connector Byte Burst Adaptive 188 204 Adaptive 750 BNC connector 270Mb s Byte 188 Bypass 800mV 10 AC 90V 260V 50Hz 60Hz 5Kg 44mmx255mmx483mm 0 40 C 20 70 C Tuner parameter Input Frequency Range Input Level symbol Rate 47 862MHz 45 90dBu V 3 5 7Mbaud Input Impedance Demodulation mode ASI Output Interface Data Transmission Rate Data Mode Pa
20. n select Factory Default and press OK key The warning message will be displayed If you are sure of your operation select OK and press OK key Notify Once back to factory default condition you will lose all of data and information which was previously installed 19 PDSR 3000P 5 3 Option Menu The Option Menu consists of 3 submenus 5 3 1 System Setting 1 System Setting Antenna Direction Help lt is only available on PDSR 3000P XXS IRD Information OSD You could select the OSD language between Chinese and English we OSD Language Audio Language Set the priority of audio P Audio Language English language you could set the desired me Sa On chores Pe language to be first priority under the te ee nern condition that this language is supported by s PER C E the channel LNB power Set LNB power ON or OFF It is only available on PDSR 3000P XXS 4 TV Type Select the type according to your TV system PAL NTSC PAL amp NTSC 5 Start On Channel Press OK the message Activate Start On Channel will be displayed select OK and press OK key the channel list will be displayed you could select one channel from it the selected channel starts whenever you turn on the IRD If you haven t set Start On Channel it will autumatically play the last viewing channel 6 Signal Source Select the signal source between TUNER and ASI ASI Output Output cle
21. nect to QAM Modulator ASI TS DCH 3000TN CE QAM Modulator ASI TS DCH 3000TM QAM Modulator ASI TS DCH 3000TM QAM Modulator ASI TS DCH 3000TM QAM Modulator Professional Decoder Connect to TS Generator PDSR 3000P 30T Professional Decoder CATV Net work PDSR 3000P 4 General Functions The following describes the basic function of your PDSR 3000P while watching satellite TV programs or listening to broadcasts 4 1 Select Channel To select channels use the A V keys of the front panel In additional to the above normal function the PDSR 3000P provides a more convenient channel change function While watching press OK key A channel list will be displayed on the right side of the screen Press A V keys to move through the list from up to down The OK key will confirm your selection If you press ESC key the list will disappear 4 2 Channel Information Every time you change channels you will receive short form program information for approximately 6 seconds If you want to check detailed channel information you could press lt key while watching or while Shift indicator Yellow is on If you press ESC key the information will disappear 4 3 Volume Control While SHIFT indicator is off and watching you could press lt P keys of the front panel to control volume Notify The IRD have 18 volume grades while tun
22. nstallation Set antenna parameters searching channel and resume factory default configuration e Option Menu Setting system parameters antenna position and viewing IRD information e Common Interface Checking status of common interface and setting descrambling mode Note e he gt keys let you move from left to right to any item within the menu the A V keys let you move from up to down to any item within the menu pressing OK key to confirm and pressing ESC key to exit e For the items with mark the lt b keys let you modify parameters or press OK key to display the list then select correct parameters in the list e For the items with mark use the key to display the numeric keypad then press the keys to move to numbers use the lt b keys to select correct number and press OK to make it be in effect use keys to select OK to make final confirmation of modified parameters or to select Cancel to cancel the input data 5 1 Channel Manager The Channel Manager consists of two items e V Channel e Radio Channel Since the functions related to the Radio Channel is the same as that for TV Channel this manual will only detail the TV Channel manager PDSR 3000P Select TV Channel from the Main Page and press OK the TV Channel Manager is displayed On the left side of the TV Channel menu you can see the channel list on the right side you can view the current channel in the Picture in
23. ove cursor to select VIEW or EXIT 8 In Channel Search press Menu key the submenu will be displayed amp Set PID Delete TP Search Option 1 Set PID You could set PID Packet Identifier manually with Set PID command 18 Channel Frequency FFT Mode Guard Intorval Constellation Hiararchy Codo Rate tran Gaiality IFrequancy FFT Mode Guard Intorval Constellation Hiararchy Code Rate PDSR 3000P 794000 ek 118 OPSK HOME 112 PDSR 3000P Move to the Transponder item and press Menu to display the Command box select Set PID command and press OK the menu Set PID IAntenna Satellite will be displayed you could input correct data Tranaponder Set PIL and press OK key to confirm it Symb at If the Set PID operation is successful you could see a new program named PID XXXX in the channel list the XXXX means Video PID 2 Delete TP Move to the Transponder you want to delete press Menu Key to display the Command Box then select Delete TP Command the message Are you Hierarchy Code Rata sure to delete this TP will be displayed select OK and press OK key to confirm it 3 Search Options it provides you convenient options to search channels you could only serach FTA channels or All channels 5 2 4 Factory Default If you want to bring PDSR 3000P back to the factory default configuratio
24. tenna Satollite Transpordi Frequency Symbol Rat Folarizattor Att oan R atailita 985 DW6 Tranmponds a DW Pro runa y i RDP Interna ol By nlaol fal r pn VLESAT A Puta tieatioy Seanning Strength EE ret mee Quality a 00 During searching procedure you can see a list of the previously searched channels in the On completion of searching channels you could move cursor to select VIEW or EXIT 6 In Channel Search press Menu key the submenu will be displayed Antenna Satellite Transponder Ea Frequency Symbol Hate Polarization PDSR 3000P 2 Delete TP Move to the Transponder you want to delete press Menu Key to display the Command Box then select Delete TP Command the message Are you Hierarchy NONE sure to delete this TP will be displayed Coda R ls Tr select OK and press OK key to confirm it ual i2 3 Search Options it provides you convenient ren TP options to search channels you could only serach FTA channels or All channels 5 2 2 PDSR 3000P XXC Channel Search 1 No Each No corresponds with a frequency 2 Frequency Input the frequency to be searched 3 Symbol Rate Input the symbol rate to be searched 4 Modulation Mode Choose modulation mode In Channel Search menu when the Ha Frequency 600000 parameters input or chosen corresponds with Symbol Rate 6974 Modulation those of signal sour
25. ut ASI stream and AV video signal It could directly receive ASI stream from various stream output equipments If you connect in series the ASI OUT and ASI IN interfaces of two or more IRDs the more channels could be descrambled to save remultiplexing resource Method Enter the System Setting menu set the signal resource to ASI Please refer to 5 3 1 oystem Setting 3D PDSR 3000P 7 Trouble Shooting Problem Possible Causes What To Do The display of front panel does Macael stes aeciad Check the main cable is not light up plugged into the power socket The antenna is not toward to the Adjust the antenna satellite No sound or picture Pause Check the cable connection LNB and the related appliance between LNB and Decoder or adjust the antenna The antenna is not toward to the Adjust the antenna satellite Add a attenuation before LNB Signal is too strong IN Bad picture Pause b Change to one big size The antenna size is too small Seas Change to an LNB with lower The LNB is faulty Change the LNB Haven t insert CI Module or the CI Module is not match the Insert correct CI Module scrambled channel No signal or signal is weak Couldnt view the scramble channel Haven t insert CA Smart Card or the CA Smart Card has not Insert correct CA Smart Card authorization Notify If you have tried all the actions suggested above and couldn t solve the problem please contact your dealer or service

Download Pdf Manuals

image

Related Search

Related Contents

NN一4203了A一J  La photographie comme mode de connaissance anthropologique  ウエットラング,血漿リーク  “previsão” dará processo ao técnico do coritiba    USER MANUAL - CAMBOARD Electronics  MULTÍMETRO DIGITAL MANUAL DE INSTRUÇÕES ET  カタログはこちらから  243-226-SH Électronique  File 1  

Copyright © All rights reserved.
Failed to retrieve file